Koen Kooi | 2ba3549 | 2013-09-09 16:29:21 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 as |
| 6 | * published by the Free Software Foundation. |
| 7 | */ |
| 8 | |
| 9 | / { |
| 10 | model = "TI AM335x BeagleBone"; |
| 11 | compatible = "ti,am335x-bone", "ti,am33xx"; |
| 12 | |
| 13 | cpus { |
| 14 | cpu@0 { |
| 15 | cpu0-supply = <&dcdc2_reg>; |
| 16 | }; |
| 17 | }; |
| 18 | |
| 19 | memory { |
| 20 | device_type = "memory"; |
| 21 | reg = <0x80000000 0x10000000>; /* 256 MB */ |
| 22 | }; |
| 23 | |
Koen Kooi | 2ba3549 | 2013-09-09 16:29:21 +0200 | [diff] [blame] | 24 | leds { |
| 25 | pinctrl-names = "default"; |
| 26 | pinctrl-0 = <&user_leds_s0>; |
| 27 | |
| 28 | compatible = "gpio-leds"; |
| 29 | |
| 30 | led@2 { |
| 31 | label = "beaglebone:green:heartbeat"; |
| 32 | gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; |
| 33 | linux,default-trigger = "heartbeat"; |
| 34 | default-state = "off"; |
| 35 | }; |
| 36 | |
| 37 | led@3 { |
| 38 | label = "beaglebone:green:mmc0"; |
| 39 | gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; |
| 40 | linux,default-trigger = "mmc0"; |
| 41 | default-state = "off"; |
| 42 | }; |
| 43 | |
| 44 | led@4 { |
| 45 | label = "beaglebone:green:usr2"; |
| 46 | gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; |
Koen Kooi | ec8a759 | 2013-09-12 20:35:35 +0200 | [diff] [blame] | 47 | linux,default-trigger = "cpu0"; |
Koen Kooi | 2ba3549 | 2013-09-09 16:29:21 +0200 | [diff] [blame] | 48 | default-state = "off"; |
| 49 | }; |
| 50 | |
| 51 | led@5 { |
| 52 | label = "beaglebone:green:usr3"; |
| 53 | gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; |
Koen Kooi | ec8a759 | 2013-09-12 20:35:35 +0200 | [diff] [blame] | 54 | linux,default-trigger = "mmc1"; |
Koen Kooi | 2ba3549 | 2013-09-09 16:29:21 +0200 | [diff] [blame] | 55 | default-state = "off"; |
| 56 | }; |
| 57 | }; |
| 58 | }; |
| 59 | |
Javier Martinez Canillas | 82d75af | 2013-09-20 17:00:00 +0200 | [diff] [blame] | 60 | &am33xx_pinmux { |
| 61 | pinctrl-names = "default"; |
| 62 | pinctrl-0 = <&clkout2_pin>; |
| 63 | |
| 64 | user_leds_s0: user_leds_s0 { |
| 65 | pinctrl-single,pins = < |
| 66 | 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ |
| 67 | 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ |
| 68 | 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ |
| 69 | 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ |
| 70 | >; |
| 71 | }; |
| 72 | |
| 73 | i2c0_pins: pinmux_i2c0_pins { |
| 74 | pinctrl-single,pins = < |
| 75 | 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ |
| 76 | 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ |
| 77 | >; |
| 78 | }; |
| 79 | |
| 80 | uart0_pins: pinmux_uart0_pins { |
| 81 | pinctrl-single,pins = < |
| 82 | 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ |
| 83 | 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ |
| 84 | >; |
| 85 | }; |
| 86 | |
| 87 | clkout2_pin: pinmux_clkout2_pin { |
| 88 | pinctrl-single,pins = < |
| 89 | 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ |
| 90 | >; |
| 91 | }; |
| 92 | |
| 93 | cpsw_default: cpsw_default { |
| 94 | pinctrl-single,pins = < |
| 95 | /* Slave 1 */ |
| 96 | 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ |
| 97 | 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ |
| 98 | 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ |
| 99 | 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ |
| 100 | 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ |
| 101 | 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ |
| 102 | 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ |
| 103 | 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ |
| 104 | 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ |
| 105 | 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ |
| 106 | 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ |
| 107 | 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ |
| 108 | 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ |
| 109 | >; |
| 110 | }; |
| 111 | |
| 112 | cpsw_sleep: cpsw_sleep { |
| 113 | pinctrl-single,pins = < |
| 114 | /* Slave 1 reset value */ |
| 115 | 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 116 | 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 117 | 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 118 | 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 119 | 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 120 | 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 121 | 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 122 | 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 123 | 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 124 | 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 125 | 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 126 | 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 127 | 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 128 | >; |
| 129 | }; |
| 130 | |
| 131 | davinci_mdio_default: davinci_mdio_default { |
| 132 | pinctrl-single,pins = < |
| 133 | /* MDIO */ |
| 134 | 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ |
| 135 | 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ |
| 136 | >; |
| 137 | }; |
| 138 | |
| 139 | davinci_mdio_sleep: davinci_mdio_sleep { |
| 140 | pinctrl-single,pins = < |
| 141 | /* MDIO reset value */ |
| 142 | 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 143 | 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) |
| 144 | >; |
| 145 | }; |
| 146 | |
| 147 | mmc1_pins: pinmux_mmc1_pins { |
| 148 | pinctrl-single,pins = < |
| 149 | 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ |
| 150 | >; |
| 151 | }; |
| 152 | |
| 153 | emmc_pins: pinmux_emmc_pins { |
| 154 | pinctrl-single,pins = < |
| 155 | 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ |
| 156 | 0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_csn2.mmc1_cmd */ |
| 157 | 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ |
| 158 | 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ |
| 159 | 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ |
| 160 | 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ |
| 161 | 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ |
| 162 | 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ |
| 163 | 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ |
| 164 | 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ |
| 165 | >; |
| 166 | }; |
| 167 | }; |
| 168 | |
Javier Martinez Canillas | e0efaaf | 2013-09-20 17:42:19 +0200 | [diff] [blame^] | 169 | &uart0 { |
| 170 | pinctrl-names = "default"; |
| 171 | pinctrl-0 = <&uart0_pins>; |
| 172 | |
| 173 | status = "okay"; |
| 174 | }; |
| 175 | |
| 176 | &usb { |
| 177 | status = "okay"; |
| 178 | |
| 179 | control@44e10000 { |
| 180 | status = "okay"; |
| 181 | }; |
| 182 | |
| 183 | usb-phy@47401300 { |
| 184 | status = "okay"; |
| 185 | }; |
| 186 | |
| 187 | usb-phy@47401b00 { |
| 188 | status = "okay"; |
| 189 | }; |
| 190 | |
| 191 | usb@47401000 { |
| 192 | status = "okay"; |
| 193 | }; |
| 194 | |
| 195 | usb@47401800 { |
| 196 | status = "okay"; |
| 197 | dr_mode = "host"; |
| 198 | }; |
| 199 | |
| 200 | dma-controller@07402000 { |
| 201 | status = "okay"; |
| 202 | }; |
| 203 | }; |
| 204 | |
| 205 | &i2c0 { |
| 206 | pinctrl-names = "default"; |
| 207 | pinctrl-0 = <&i2c0_pins>; |
| 208 | |
| 209 | status = "okay"; |
| 210 | clock-frequency = <400000>; |
| 211 | |
| 212 | tps: tps@24 { |
| 213 | reg = <0x24>; |
| 214 | }; |
| 215 | |
| 216 | }; |
| 217 | |
Koen Kooi | 2ba3549 | 2013-09-09 16:29:21 +0200 | [diff] [blame] | 218 | /include/ "tps65217.dtsi" |
| 219 | |
| 220 | &tps { |
| 221 | regulators { |
| 222 | dcdc1_reg: regulator@0 { |
| 223 | regulator-always-on; |
| 224 | }; |
| 225 | |
| 226 | dcdc2_reg: regulator@1 { |
| 227 | /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ |
| 228 | regulator-name = "vdd_mpu"; |
| 229 | regulator-min-microvolt = <925000>; |
| 230 | regulator-max-microvolt = <1325000>; |
| 231 | regulator-boot-on; |
| 232 | regulator-always-on; |
| 233 | }; |
| 234 | |
| 235 | dcdc3_reg: regulator@2 { |
| 236 | /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ |
| 237 | regulator-name = "vdd_core"; |
| 238 | regulator-min-microvolt = <925000>; |
| 239 | regulator-max-microvolt = <1150000>; |
| 240 | regulator-boot-on; |
| 241 | regulator-always-on; |
| 242 | }; |
| 243 | |
| 244 | ldo1_reg: regulator@3 { |
| 245 | regulator-always-on; |
| 246 | }; |
| 247 | |
| 248 | ldo2_reg: regulator@4 { |
| 249 | regulator-always-on; |
| 250 | }; |
| 251 | |
| 252 | ldo3_reg: regulator@5 { |
| 253 | regulator-always-on; |
| 254 | }; |
| 255 | |
| 256 | ldo4_reg: regulator@6 { |
| 257 | regulator-always-on; |
| 258 | }; |
| 259 | }; |
Koen Kooi | 1aac4a9 | 2013-09-12 20:35:33 +0200 | [diff] [blame] | 260 | |
| 261 | vmmcsd_fixed: fixedregulator@0 { |
| 262 | compatible = "regulator-fixed"; |
| 263 | regulator-name = "vmmcsd_fixed"; |
| 264 | regulator-min-microvolt = <3300000>; |
| 265 | regulator-max-microvolt = <3300000>; |
| 266 | }; |
Koen Kooi | 2ba3549 | 2013-09-09 16:29:21 +0200 | [diff] [blame] | 267 | }; |
| 268 | |
| 269 | &cpsw_emac0 { |
| 270 | phy_id = <&davinci_mdio>, <0>; |
| 271 | phy-mode = "mii"; |
| 272 | }; |
| 273 | |
| 274 | &cpsw_emac1 { |
| 275 | phy_id = <&davinci_mdio>, <1>; |
| 276 | phy-mode = "mii"; |
| 277 | }; |
| 278 | |
| 279 | &mac { |
| 280 | pinctrl-names = "default", "sleep"; |
| 281 | pinctrl-0 = <&cpsw_default>; |
| 282 | pinctrl-1 = <&cpsw_sleep>; |
| 283 | |
| 284 | }; |
| 285 | |
| 286 | &davinci_mdio { |
| 287 | pinctrl-names = "default", "sleep"; |
| 288 | pinctrl-0 = <&davinci_mdio_default>; |
| 289 | pinctrl-1 = <&davinci_mdio_sleep>; |
| 290 | }; |
Alexander Holler | 3045fff | 2013-09-12 20:35:32 +0200 | [diff] [blame] | 291 | |
| 292 | &mmc1 { |
| 293 | status = "okay"; |
Koen Kooi | 757a90e | 2013-09-12 20:35:34 +0200 | [diff] [blame] | 294 | bus-width = <0x4>; |
Alexander Holler | 3045fff | 2013-09-12 20:35:32 +0200 | [diff] [blame] | 295 | pinctrl-names = "default"; |
| 296 | pinctrl-0 = <&mmc1_pins>; |
| 297 | cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; |
| 298 | cd-inverted; |
| 299 | }; |