blob: b3b9ac61d29d8751baff13446f800a2c9bc9e9fb [file] [log] [blame]
Jesse Grossccb13522011-10-25 19:26:31 -07001Open vSwitch datapath developer documentation
2=============================================
3
4The Open vSwitch kernel module allows flexible userspace control over
5flow-level packet processing on selected network devices. It can be
6used to implement a plain Ethernet switch, network device bonding,
7VLAN processing, network access control, flow-based network control,
8and so on.
9
10The kernel module implements multiple "datapaths" (analogous to
11bridges), each of which can have multiple "vports" (analogous to ports
12within a bridge). Each datapath also has associated with it a "flow
13table" that userspace populates with "flows" that map from keys based
14on packet headers and metadata to sets of actions. The most common
15action forwards the packet to another vport; other actions are also
16implemented.
17
18When a packet arrives on a vport, the kernel module processes it by
19extracting its flow key and looking it up in the flow table. If there
20is a matching flow, it executes the associated actions. If there is
21no match, it queues the packet to userspace for processing (as part of
22its processing, userspace will likely set up a flow to handle further
23packets of the same type entirely in-kernel).
24
25
26Flow key compatibility
27----------------------
28
29Network protocols evolve over time. New protocols become important
30and existing protocols lose their prominence. For the Open vSwitch
31kernel module to remain relevant, it must be possible for newer
32versions to parse additional protocols as part of the flow key. It
33might even be desirable, someday, to drop support for parsing
34protocols that have become obsolete. Therefore, the Netlink interface
35to Open vSwitch is designed to allow carefully written userspace
36applications to work with any version of the flow key, past or future.
37
38To support this forward and backward compatibility, whenever the
39kernel module passes a packet to userspace, it also passes along the
40flow key that it parsed from the packet. Userspace then extracts its
41own notion of a flow key from the packet and compares it against the
42kernel-provided version:
43
44 - If userspace's notion of the flow key for the packet matches the
45 kernel's, then nothing special is necessary.
46
47 - If the kernel's flow key includes more fields than the userspace
48 version of the flow key, for example if the kernel decoded IPv6
49 headers but userspace stopped at the Ethernet type (because it
50 does not understand IPv6), then again nothing special is
51 necessary. Userspace can still set up a flow in the usual way,
52 as long as it uses the kernel-provided flow key to do it.
53
54 - If the userspace flow key includes more fields than the
55 kernel's, for example if userspace decoded an IPv6 header but
56 the kernel stopped at the Ethernet type, then userspace can
57 forward the packet manually, without setting up a flow in the
58 kernel. This case is bad for performance because every packet
59 that the kernel considers part of the flow must go to userspace,
60 but the forwarding behavior is correct. (If userspace can
61 determine that the values of the extra fields would not affect
62 forwarding behavior, then it could set up a flow anyway.)
63
64How flow keys evolve over time is important to making this work, so
65the following sections go into detail.
66
67
68Flow key format
69---------------
70
71A flow key is passed over a Netlink socket as a sequence of Netlink
72attributes. Some attributes represent packet metadata, defined as any
73information about a packet that cannot be extracted from the packet
74itself, e.g. the vport on which the packet was received. Most
75attributes, however, are extracted from headers within the packet,
76e.g. source and destination addresses from Ethernet, IP, or TCP
77headers.
78
79The <linux/openvswitch.h> header file defines the exact format of the
80flow key attributes. For informal explanatory purposes here, we write
81them as comma-separated strings, with parentheses indicating arguments
82and nesting. For example, the following could represent a flow key
83corresponding to a TCP packet that arrived on vport 1:
84
85 in_port(1), eth(src=e0:91:f5:21:d0:b2, dst=00:02:e3:0f:80:a4),
86 eth_type(0x0800), ipv4(src=172.16.0.20, dst=172.18.0.52, proto=17, tos=0,
87 frag=no), tcp(src=49163, dst=80)
88
89Often we ellipsize arguments not important to the discussion, e.g.:
90
91 in_port(1), eth(...), eth_type(0x0800), ipv4(...), tcp(...)
92
93
Andy Zhou03f0d912013-08-07 20:01:00 -070094Wildcarded flow key format
95--------------------------
96
97A wildcarded flow is described with two sequences of Netlink attributes
98passed over the Netlink socket. A flow key, exactly as described above, and an
99optional corresponding flow mask.
100
101A wildcarded flow can represent a group of exact match flows. Each '1' bit
102in the mask specifies a exact match with the corresponding bit in the flow key.
103A '0' bit specifies a don't care bit, which will match either a '1' or '0' bit
104of a incoming packet. Using wildcarded flow can improve the flow set up rate
105by reduce the number of new flows need to be processed by the user space program.
106
107Support for the mask Netlink attribute is optional for both the kernel and user
108space program. The kernel can ignore the mask attribute, installing an exact
109match flow, or reduce the number of don't care bits in the kernel to less than
110what was specified by the user space program. In this case, variations in bits
111that the kernel does not implement will simply result in additional flow setups.
112The kernel module will also work with user space programs that neither support
113nor supply flow mask attributes.
114
115Since the kernel may ignore or modify wildcard bits, it can be difficult for
116the userspace program to know exactly what matches are installed. There are
117two possible approaches: reactively install flows as they miss the kernel
118flow table (and therefore not attempt to determine wildcard changes at all)
119or use the kernel's response messages to determine the installed wildcards.
120
121When interacting with userspace, the kernel should maintain the match portion
122of the key exactly as originally installed. This will provides a handle to
123identify the flow for all future operations. However, when reporting the
124mask of an installed flow, the mask should include any restrictions imposed
125by the kernel.
126
127The behavior when using overlapping wildcarded flows is undefined. It is the
128responsibility of the user space program to ensure that any incoming packet
129can match at most one flow, wildcarded or not. The current implementation
130performs best-effort detection of overlapping wildcarded flows and may reject
131some but not all of them. However, this behavior may change in future versions.
132
133
Joe Stringer74ed7ab2015-01-21 16:42:52 -0800134Unique flow identifiers
135-----------------------
136
137An alternative to using the original match portion of a key as the handle for
138flow identification is a unique flow identifier, or "UFID". UFIDs are optional
139for both the kernel and user space program.
140
141User space programs that support UFID are expected to provide it during flow
142setup in addition to the flow, then refer to the flow using the UFID for all
143future operations. The kernel is not required to index flows by the original
144flow key if a UFID is specified.
145
146
Jesse Grossccb13522011-10-25 19:26:31 -0700147Basic rule for evolving flow keys
148---------------------------------
149
150Some care is needed to really maintain forward and backward
151compatibility for applications that follow the rules listed under
152"Flow key compatibility" above.
153
154The basic rule is obvious:
155
156 ------------------------------------------------------------------
157 New network protocol support must only supplement existing flow
158 key attributes. It must not change the meaning of already defined
159 flow key attributes.
160 ------------------------------------------------------------------
161
162This rule does have less-obvious consequences so it is worth working
163through a few examples. Suppose, for example, that the kernel module
164did not already implement VLAN parsing. Instead, it just interpreted
165the 802.1Q TPID (0x8100) as the Ethertype then stopped parsing the
166packet. The flow key for any packet with an 802.1Q header would look
167essentially like this, ignoring metadata:
168
169 eth(...), eth_type(0x8100)
170
171Naively, to add VLAN support, it makes sense to add a new "vlan" flow
172key attribute to contain the VLAN tag, then continue to decode the
173encapsulated headers beyond the VLAN tag using the existing field
Leo Altermanefaac3b2012-07-20 14:51:07 -0700174definitions. With this change, a TCP packet in VLAN 10 would have a
Jesse Grossccb13522011-10-25 19:26:31 -0700175flow key much like this:
176
177 eth(...), vlan(vid=10, pcp=0), eth_type(0x0800), ip(proto=6, ...), tcp(...)
178
179But this change would negatively affect a userspace application that
180has not been updated to understand the new "vlan" flow key attribute.
181The application could, following the flow compatibility rules above,
182ignore the "vlan" attribute that it does not understand and therefore
183assume that the flow contained IP packets. This is a bad assumption
184(the flow only contains IP packets if one parses and skips over the
185802.1Q header) and it could cause the application's behavior to change
186across kernel versions even though it follows the compatibility rules.
187
188The solution is to use a set of nested attributes. This is, for
189example, why 802.1Q support uses nested attributes. A TCP packet in
190VLAN 10 is actually expressed as:
191
192 eth(...), eth_type(0x8100), vlan(vid=10, pcp=0), encap(eth_type(0x0800),
193 ip(proto=6, ...), tcp(...)))
194
195Notice how the "eth_type", "ip", and "tcp" flow key attributes are
196nested inside the "encap" attribute. Thus, an application that does
197not understand the "vlan" key will not see either of those attributes
198and therefore will not misinterpret them. (Also, the outer eth_type
199is still 0x8100, not changed to 0x0800.)
200
201Handling malformed packets
202--------------------------
203
204Don't drop packets in the kernel for malformed protocol headers, bad
205checksums, etc. This would prevent userspace from implementing a
206simple Ethernet switch that forwards every packet.
207
208Instead, in such a case, include an attribute with "empty" content.
209It doesn't matter if the empty content could be valid protocol values,
210as long as those values are rarely seen in practice, because userspace
211can always forward all packets with those values to userspace and
212handle them individually.
213
214For example, consider a packet that contains an IP header that
215indicates protocol 6 for TCP, but which is truncated just after the IP
216header, so that the TCP header is missing. The flow key for this
217packet would include a tcp attribute with all-zero src and dst, like
218this:
219
220 eth(...), eth_type(0x0800), ip(proto=6, ...), tcp(src=0, dst=0)
221
222As another example, consider a packet with an Ethernet type of 0x8100,
223indicating that a VLAN TCI should follow, but which is truncated just
224after the Ethernet type. The flow key for this packet would include
225an all-zero-bits vlan and an empty encap attribute, like this:
226
227 eth(...), eth_type(0x8100), vlan(0), encap()
228
229Unlike a TCP packet with source and destination ports 0, an
230all-zero-bits VLAN TCI is not that rare, so the CFI bit (aka
231VLAN_TAG_PRESENT inside the kernel) is ordinarily set in a vlan
232attribute expressly to allow this situation to be distinguished.
233Thus, the flow key in this second example unambiguously indicates a
234missing or malformed VLAN TCI.
235
236Other rules
237-----------
238
239The other rules for flow keys are much less subtle:
240
241 - Duplicate attributes are not allowed at a given nesting level.
242
243 - Ordering of attributes is not significant.
244
245 - When the kernel sends a given flow key to userspace, it always
246 composes it the same way. This allows userspace to hash and
247 compare entire flow keys that it may not be able to fully
248 interpret.