blob: 413ef9cfaa4d10740e3f8b6e4b764c392d53ffcc [file] [log] [blame]
Robert Jarzmik16eea6b2015-05-25 23:29:18 +02001PXA/MMP - DMA Slave controller
2==============================
3
4Constraints
5-----------
6 a) Transfers hot queuing
7 A driver submitting a transfer and issuing it should be granted the transfer
8 is queued even on a running DMA channel.
9 This implies that the queuing doesn't wait for the previous transfer end,
10 and that the descriptor chaining is not only done in the irq/tasklet code
11 triggered by the end of the transfer.
12 A transfer which is submitted and issued on a phy doesn't wait for a phy to
13 stop and restart, but is submitted on a "running channel". The other
14 drivers, especially mmp_pdma waited for the phy to stop before relaunching
15 a new transfer.
16
17 b) All transfers having asked for confirmation should be signaled
18 Any issued transfer with DMA_PREP_INTERRUPT should trigger a callback call.
19 This implies that even if an irq/tasklet is triggered by end of tx1, but
20 at the time of irq/dma tx2 is already finished, tx1->complete() and
21 tx2->complete() should be called.
22
23 c) Channel running state
24 A driver should be able to query if a channel is running or not. For the
25 multimedia case, such as video capture, if a transfer is submitted and then
26 a check of the DMA channel reports a "stopped channel", the transfer should
27 not be issued until the next "start of frame interrupt", hence the need to
28 know if a channel is in running or stopped state.
29
30 d) Bandwidth guarantee
31 The PXA architecture has 4 levels of DMAs priorities : high, normal, low.
32 The high prorities get twice as much bandwidth as the normal, which get twice
33 as much as the low priorities.
34 A driver should be able to request a priority, especially the real-time
35 ones such as pxa_camera with (big) throughputs.
36
37Design
38------
39 a) Virtual channels
40 Same concept as in sa11x0 driver, ie. a driver was assigned a "virtual
41 channel" linked to the requestor line, and the physical DMA channel is
42 assigned on the fly when the transfer is issued.
43
44 b) Transfer anatomy for a scatter-gather transfer
45 +------------+-----+---------------+----------------+-----------------+
46 | desc-sg[0] | ... | desc-sg[last] | status updater | finisher/linker |
47 +------------+-----+---------------+----------------+-----------------+
48
49 This structure is pointed by dma->sg_cpu.
50 The descriptors are used as follows :
51 - desc-sg[i]: i-th descriptor, transferring the i-th sg
52 element to the video buffer scatter gather
53 - status updater
54 Transfers a single u32 to a well known dma coherent memory to leave
55 a trace that this transfer is done. The "well known" is unique per
56 physical channel, meaning that a read of this value will tell which
57 is the last finished transfer at that point in time.
58 - finisher: has ddadr=DADDR_STOP, dcmd=ENDIRQEN
59 - linker: has ddadr= desc-sg[0] of next transfer, dcmd=0
60
61 c) Transfers hot-chaining
62 Suppose the running chain is :
63 Buffer 1 Buffer 2
64 +---------+----+---+ +----+----+----+---+
65 | d0 | .. | dN | l | | d0 | .. | dN | f |
66 +---------+----+-|-+ ^----+----+----+---+
67 | |
68 +----+
69
70 After a call to dmaengine_submit(b3), the chain will look like :
71 Buffer 1 Buffer 2 Buffer 3
72 +---------+----+---+ +----+----+----+---+ +----+----+----+---+
73 | d0 | .. | dN | l | | d0 | .. | dN | l | | d0 | .. | dN | f |
74 +---------+----+-|-+ ^----+----+----+-|-+ ^----+----+----+---+
75 | | | |
76 +----+ +----+
77 new_link
78
79 If while new_link was created the DMA channel stopped, it is _not_
80 restarted. Hot-chaining doesn't break the assumption that
81 dma_async_issue_pending() is to be used to ensure the transfer is actually started.
82
83 One exception to this rule :
84 - if Buffer1 and Buffer2 had all their addresses 8 bytes aligned
85 - and if Buffer3 has at least one address not 4 bytes aligned
86 - then hot-chaining cannot happen, as the channel must be stopped, the
87 "align bit" must be set, and the channel restarted As a consequence,
88 such a transfer tx_submit() will be queued on the submitted queue, and
89 this specific case if the DMA is already running in aligned mode.
90
91 d) Transfers completion updater
92 Each time a transfer is completed on a channel, an interrupt might be
93 generated or not, up to the client's request. But in each case, the last
94 descriptor of a transfer, the "status updater", will write the latest
95 transfer being completed into the physical channel's completion mark.
96
97 This will speed up residue calculation, for large transfers such as video
98 buffers which hold around 6k descriptors or more. This also allows without
99 any lock to find out what is the latest completed transfer in a running
100 DMA chain.
101
102 e) Transfers completion, irq and tasklet
103 When a transfer flagged as "DMA_PREP_INTERRUPT" is finished, the dma irq
104 is raised. Upon this interrupt, a tasklet is scheduled for the physical
105 channel.
106 The tasklet is responsible for :
107 - reading the physical channel last updater mark
108 - calling all the transfer callbacks of finished transfers, based on
109 that mark, and each transfer flags.
110 If a transfer is completed while this handling is done, a dma irq will
111 be raised, and the tasklet will be scheduled once again, having a new
112 updater mark.
113
114 f) Residue
115 Residue granularity will be descriptor based. The issued but not completed
116 transfers will be scanned for all of their descriptors against the
117 currently running descriptor.
118
119 g) Most complicated case of driver's tx queues
120 The most tricky situation is when :
121 - there are not "acked" transfers (tx0)
122 - a driver submitted an aligned tx1, not chained
123 - a driver submitted an aligned tx2 => tx2 is cold chained to tx1
124 - a driver issued tx1+tx2 => channel is running in aligned mode
125 - a driver submitted an aligned tx3 => tx3 is hot-chained
126 - a driver submitted an unaligned tx4 => tx4 is put in submitted queue,
127 not chained
128 - a driver issued tx4 => tx4 is put in issued queue, not chained
129 - a driver submitted an aligned tx5 => tx5 is put in submitted queue, not
130 chained
131 - a driver submitted an aligned tx6 => tx6 is put in submitted queue,
132 cold chained to tx5
133
134 This translates into (after tx4 is issued) :
135 - issued queue
136 +-----+ +-----+ +-----+ +-----+
137 | tx1 | | tx2 | | tx3 | | tx4 |
138 +---|-+ ^---|-+ ^-----+ +-----+
139 | | | |
140 +---+ +---+
141 - submitted queue
142 +-----+ +-----+
143 | tx5 | | tx6 |
144 +---|-+ ^-----+
145 | |
146 +---+
147 - completed queue : empty
148 - allocated queue : tx0
149
150 It should be noted that after tx3 is completed, the channel is stopped, and
151 restarted in "unaligned mode" to handle tx4.
152
153Author: Robert Jarzmik <robert.jarzmik@free.fr>