blob: 25fcef2c42deeb8a1cee6716d12c7e1ec2d19456 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Serial device configuration
3#
4# $Id: Kconfig,v 1.11 2004/03/11 18:08:04 lethal Exp $
5#
6
7menu "Serial drivers"
8
9#
10# The new 8250/16550 serial drivers
11config SERIAL_8250
12 tristate "8250/16550 and compatible serial support"
13 depends on (BROKEN || !(SPARC64 || SPARC32))
14 select SERIAL_CORE
15 ---help---
16 This selects whether you want to include the driver for the standard
17 serial ports. The standard answer is Y. People who might say N
18 here are those that are setting up dedicated Ethernet WWW/FTP
19 servers, or users that have one of the various bus mice instead of a
20 serial mouse and don't intend to use their machine's standard serial
21 port for anything. (Note that the Cyclades and Stallion multi
22 serial port drivers do not need this driver built in for them to
23 work.)
24
25 To compile this driver as a module, choose M here: the
26 module will be called serial.
27 [WARNING: Do not compile this driver as a module if you are using
28 non-standard serial ports, since the configuration information will
29 be lost when the driver is unloaded. This limitation may be lifted
30 in the future.]
31
32 BTW1: If you have a mouseman serial mouse which is not recognized by
33 the X window system, try running gpm first.
34
35 BTW2: If you intend to use a software modem (also called Winmodem)
36 under Linux, forget it. These modems are crippled and require
37 proprietary drivers which are only available under Windows.
38
39 Most people will say Y or M here, so that they can use serial mice,
40 modems and similar devices connecting to the standard serial ports.
41
42config SERIAL_8250_CONSOLE
43 bool "Console on 8250/16550 and compatible serial port"
44 depends on SERIAL_8250=y
45 select SERIAL_CORE_CONSOLE
46 ---help---
47 If you say Y here, it will be possible to use a serial port as the
48 system console (the system console is the device which receives all
49 kernel messages and warnings and which allows logins in single user
50 mode). This could be useful if some terminal or printer is connected
51 to that serial port.
52
53 Even if you say Y here, the currently visible virtual console
54 (/dev/tty0) will still be used as the system console by default, but
55 you can alter that using a kernel command line option such as
56 "console=ttyS1". (Try "man bootparam" or see the documentation of
57 your boot loader (grub or lilo or loadlin) about how to pass options
58 to the kernel at boot time.)
59
60 If you don't have a VGA card installed and you say Y here, the
61 kernel will automatically use the first serial line, /dev/ttyS0, as
62 system console.
63
64 If unsure, say N.
65
66config SERIAL_8250_CS
67 tristate "8250/16550 PCMCIA device support"
68 depends on PCMCIA && SERIAL_8250
69 ---help---
70 Say Y here to enable support for 16-bit PCMCIA serial devices,
71 including serial port cards, modems, and the modem functions of
72 multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
73 credit-card size devices often used with laptops.)
74
75 To compile this driver as a module, choose M here: the
76 module will be called serial_cs.
77
78 If unsure, say N.
79
80config SERIAL_8250_ACPI
81 bool "8250/16550 device discovery via ACPI namespace"
82 default y if IA64
83 depends on ACPI_BUS && SERIAL_8250
84 ---help---
85 If you wish to enable serial port discovery via the ACPI
86 namespace, say Y here. If unsure, say N.
87
88config SERIAL_8250_NR_UARTS
89 int "Maximum number of non-legacy 8250/16550 serial ports"
90 depends on SERIAL_8250
91 default "4"
92 ---help---
93 Set this to the number of non-legacy serial ports you want
94 the driver to support. This includes any ports discovered
95 via ACPI or PCI enumeration and any ports that may be added
96 at run-time via hot-plug.
97
98config SERIAL_8250_EXTENDED
99 bool "Extended 8250/16550 serial driver options"
100 depends on SERIAL_8250
101 help
102 If you wish to use any non-standard features of the standard "dumb"
103 driver, say Y here. This includes HUB6 support, shared serial
104 interrupts, special multiport support, support for more than the
105 four COM 1/2/3/4 boards, etc.
106
107 Note that the answer to this question won't directly affect the
108 kernel: saying N will just cause the configurator to skip all
109 the questions about serial driver options. If unsure, say N.
110
111config SERIAL_8250_MANY_PORTS
112 bool "Support more than 4 legacy serial ports"
113 depends on SERIAL_8250_EXTENDED && !IA64
114 help
115 Say Y here if you have dumb serial boards other than the four
116 standard COM 1/2/3/4 ports. This may happen if you have an AST
117 FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
118 from <http://www.tldp.org/docs.html#howto>), or other custom
119 serial port hardware which acts similar to standard serial port
120 hardware. If you only use the standard COM 1/2/3/4 ports, you can
121 say N here to save some memory. You can also say Y if you have an
122 "intelligent" multiport card such as Cyclades, Digiboards, etc.
123
124config SERIAL_8250_SHARE_IRQ
125 bool "Support for sharing serial interrupts"
126 depends on SERIAL_8250_EXTENDED
127 help
128 Some serial boards have hardware support which allows multiple dumb
129 serial ports on the same board to share a single IRQ. To enable
130 support for this in the serial driver, say Y here.
131
132config SERIAL_8250_DETECT_IRQ
133 bool "Autodetect IRQ on standard ports (unsafe)"
134 depends on SERIAL_8250_EXTENDED
135 help
136 Say Y here if you want the kernel to try to guess which IRQ
137 to use for your serial port.
138
139 This is considered unsafe; it is far better to configure the IRQ in
140 a boot script using the setserial command.
141
142 If unsure, say N.
143
144config SERIAL_8250_MULTIPORT
145 bool "Support special multiport boards"
146 depends on SERIAL_8250_EXTENDED
147 help
148 Some multiport serial ports have special ports which are used to
149 signal when there are any serial ports on the board which need
150 servicing. Say Y here to enable the serial driver to take advantage
151 of those special I/O ports.
152
153config SERIAL_8250_RSA
154 bool "Support RSA serial ports"
155 depends on SERIAL_8250_EXTENDED
156 help
157 ::: To be written :::
158
159comment "Non-8250 serial port support"
160
161config SERIAL_8250_ACORN
162 tristate "Acorn expansion card serial port support"
163 depends on ARM && ARCH_ACORN && SERIAL_8250
164 help
165 If you have an Atomwide Serial card or Serial Port card for an Acorn
166 system, say Y to this option. The driver can handle 1, 2, or 3 port
167 cards. If unsure, say N.
168
169config SERIAL_AMBA_PL010
170 tristate "ARM AMBA PL010 serial port support"
171 depends on ARM_AMBA
172 select SERIAL_CORE
173 help
174 This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
175 an Integrator/AP or Integrator/PP2 platform, say Y or M here.
176
177 If unsure, say N.
178
179config SERIAL_AMBA_PL010_CONSOLE
180 bool "Support for console on AMBA serial port"
181 depends on SERIAL_AMBA_PL010=y
182 select SERIAL_CORE_CONSOLE
183 ---help---
184 Say Y here if you wish to use an AMBA PrimeCell UART as the system
185 console (the system console is the device which receives all kernel
186 messages and warnings and which allows logins in single user mode).
187
188 Even if you say Y here, the currently visible framebuffer console
189 (/dev/tty0) will still be used as the system console by default, but
190 you can alter that using a kernel command line option such as
191 "console=ttyAM0". (Try "man bootparam" or see the documentation of
192 your boot loader (lilo or loadlin) about how to pass options to the
193 kernel at boot time.)
194
195config SERIAL_AMBA_PL011
196 tristate "ARM AMBA PL011 serial port support"
197 depends on ARM_AMBA
198 select SERIAL_CORE
199 help
200 This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
201 an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
202 here.
203
204 If unsure, say N.
205
206config SERIAL_AMBA_PL011_CONSOLE
207 bool "Support for console on AMBA serial port"
208 depends on SERIAL_AMBA_PL011=y
209 select SERIAL_CORE_CONSOLE
210 ---help---
211 Say Y here if you wish to use an AMBA PrimeCell UART as the system
212 console (the system console is the device which receives all kernel
213 messages and warnings and which allows logins in single user mode).
214
215 Even if you say Y here, the currently visible framebuffer console
216 (/dev/tty0) will still be used as the system console by default, but
217 you can alter that using a kernel command line option such as
218 "console=ttyAM0". (Try "man bootparam" or see the documentation of
219 your boot loader (lilo or loadlin) about how to pass options to the
220 kernel at boot time.)
221
222config SERIAL_CLPS711X
223 tristate "CLPS711X serial port support"
224 depends on ARM && ARCH_CLPS711X
225 select SERIAL_CORE
226 help
227 ::: To be written :::
228
229config SERIAL_CLPS711X_CONSOLE
230 bool "Support for console on CLPS711X serial port"
231 depends on SERIAL_CLPS711X=y
232 select SERIAL_CORE_CONSOLE
233 help
234 Even if you say Y here, the currently visible virtual console
235 (/dev/tty0) will still be used as the system console by default, but
236 you can alter that using a kernel command line option such as
237 "console=ttyCL1". (Try "man bootparam" or see the documentation of
238 your boot loader (lilo or loadlin) about how to pass options to the
239 kernel at boot time.)
240
241config SERIAL_S3C2410
242 tristate "Samsung S3C2410 Serial port support"
243 depends on ARM && ARCH_S3C2410
244 select SERIAL_CORE
245 help
246 Support for the on-chip UARTs on the Samsung S3C2410X CPU,
247 providing /dev/ttySAC0, 1 and 2 (note, some machines may not
248 provide all of these ports, depending on how the serial port
249 pins are configured.
250
251config SERIAL_S3C2410_CONSOLE
252 bool "Support for console on S3C2410 serial port"
253 depends on SERIAL_S3C2410=y
254 select SERIAL_CORE_CONSOLE
255 help
256 Allow selection of the S3C2410 on-board serial ports for use as
257 an virtual console.
258
259 Even if you say Y here, the currently visible virtual console
260 (/dev/tty0) will still be used as the system console by default, but
261 you can alter that using a kernel command line option such as
262 "console=ttySACx". (Try "man bootparam" or see the documentation of
263 your boot loader about how to pass options to the kernel at
264 boot time.)
265
266config SERIAL_BAST_SIO
267 bool "Support for BAST SuperIO serial ports"
268 depends on ARCH_BAST && SERIAL_8250=y
269 help
270 Support for registerin the SuperIO chip on BAST board with
271 the 8250/16550 uart code.
272
273config SERIAL_DZ
274 bool "DECstation DZ serial driver"
275 depends on MACH_DECSTATION && MIPS32
276 select SERIAL_CORE
277 help
278 DZ11-family serial controllers for VAXstations, including the
279 DC7085, M7814, and M7819.
280
281config SERIAL_DZ_CONSOLE
282 bool "Support console on DECstation DZ serial driver"
283 depends on SERIAL_DZ=y
284 select SERIAL_CORE_CONSOLE
285 help
286 If you say Y here, it will be possible to use a serial port as the
287 system console (the system console is the device which receives all
288 kernel messages and warnings and which allows logins in single user
289 mode). Note that the firmware uses ttyS0 as the serial console on
290 the Maxine and ttyS2 on the others.
291
292 If unsure, say Y.
293
294config SERIAL_21285
295 tristate "DC21285 serial port support"
296 depends on ARM && FOOTBRIDGE
297 select SERIAL_CORE
298 help
299 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
300 PCI bridge you can enable its onboard serial port by enabling this
301 option.
302
303config SERIAL_21285_CONSOLE
304 bool "Console on DC21285 serial port"
305 depends on SERIAL_21285=y
306 select SERIAL_CORE_CONSOLE
307 help
308 If you have enabled the serial port on the 21285 footbridge you can
309 make it the console by answering Y to this option.
310
311 Even if you say Y here, the currently visible virtual console
312 (/dev/tty0) will still be used as the system console by default, but
313 you can alter that using a kernel command line option such as
314 "console=ttyFB". (Try "man bootparam" or see the documentation of
315 your boot loader (lilo or loadlin) about how to pass options to the
316 kernel at boot time.)
317
318config SERIAL_UART00
319 bool "Excalibur serial port (uart00) support"
320 depends on ARM && ARCH_CAMELOT
321 select SERIAL_CORE
322 help
323 Say Y here if you want to use the hard logic uart on Excalibur. This
324 driver also supports soft logic implementations of this uart core.
325
326config SERIAL_UART00_CONSOLE
327 bool "Support for console on Excalibur serial port"
328 depends on SERIAL_UART00
329 select SERIAL_CORE_CONSOLE
330 help
331 Say Y here if you want to support a serial console on an Excalibur
332 hard logic uart or uart00 IP core.
333
334 Even if you say Y here, the currently visible virtual console
335 (/dev/tty0) will still be used as the system console by default, but
336 you can alter that using a kernel command line option such as
337 "console=ttyS1". (Try "man bootparam" or see the documentation of
338 your boot loader (lilo or loadlin) about how to pass options to the
339 kernel at boot time.)
340
341config SERIAL_MPSC
342 bool "Marvell MPSC serial port support"
343 depends on PPC32 && MV64X60
344 select SERIAL_CORE
345 help
346 Say Y here if you want to use the Marvell MPSC serial controller.
347
348config SERIAL_MPSC_CONSOLE
349 bool "Support for console on Marvell MPSC serial port"
350 depends on SERIAL_MPSC
351 select SERIAL_CORE_CONSOLE
352 help
353 Say Y here if you want to support a serial console on a Marvell MPSC.
354
355config SERIAL_PXA
356 bool "PXA serial port support"
357 depends on ARM && ARCH_PXA
358 select SERIAL_CORE
359 help
360 If you have a machine based on an Intel XScale PXA2xx CPU you
361 can enable its onboard serial ports by enabling this option.
362
363config SERIAL_PXA_CONSOLE
364 bool "Console on PXA serial port"
365 depends on SERIAL_PXA
366 select SERIAL_CORE_CONSOLE
367 help
368 If you have enabled the serial port on the Intel XScale PXA
369 CPU you can make it the console by answering Y to this option.
370
371 Even if you say Y here, the currently visible virtual console
372 (/dev/tty0) will still be used as the system console by default, but
373 you can alter that using a kernel command line option such as
374 "console=ttySA0". (Try "man bootparam" or see the documentation of
375 your boot loader (lilo or loadlin) about how to pass options to the
376 kernel at boot time.)
377
378config SERIAL_SA1100
379 bool "SA1100 serial port support"
380 depends on ARM && ARCH_SA1100
381 select SERIAL_CORE
382 help
383 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
384 can enable its onboard serial port by enabling this option.
385 Please read <file:Documentation/arm/SA1100/serial_UART> for further
386 info.
387
388config SERIAL_SA1100_CONSOLE
389 bool "Console on SA1100 serial port"
390 depends on SERIAL_SA1100
391 select SERIAL_CORE_CONSOLE
392 help
393 If you have enabled the serial port on the SA1100/SA1110 StrongARM
394 CPU you can make it the console by answering Y to this option.
395
396 Even if you say Y here, the currently visible virtual console
397 (/dev/tty0) will still be used as the system console by default, but
398 you can alter that using a kernel command line option such as
399 "console=ttySA0". (Try "man bootparam" or see the documentation of
400 your boot loader (lilo or loadlin) about how to pass options to the
401 kernel at boot time.)
402
403config SERIAL_IMX
404 bool "IMX serial port support"
405 depends on ARM && ARCH_IMX
406 select SERIAL_CORE
407 help
408 If you have a machine based on a Motorola IMX CPU you
409 can enable its onboard serial port by enabling this option.
410
411config SERIAL_IMX_CONSOLE
412 bool "Console on IMX serial port"
413 depends on SERIAL_IMX
414 select SERIAL_CORE_CONSOLE
415 help
416 If you have enabled the serial port on the Motorola IMX
417 CPU you can make it the console by answering Y to this option.
418
419 Even if you say Y here, the currently visible virtual console
420 (/dev/tty0) will still be used as the system console by default, but
421 you can alter that using a kernel command line option such as
422 "console=ttySA0". (Try "man bootparam" or see the documentation of
423 your boot loader (lilo or loadlin) about how to pass options to the
424 kernel at boot time.)
425
426config SERIAL_SUNCORE
427 bool
428 depends on SPARC32 || SPARC64
429 select SERIAL_CORE
430 select SERIAL_CORE_CONSOLE
431 default y
432
433config SERIAL_SUNZILOG
434 tristate "Sun Zilog8530 serial support"
435 depends on SPARC32 || SPARC64
436 help
437 This driver supports the Zilog8530 serial ports found on many Sparc
438 systems. Say Y or M if you want to be able to these serial ports.
439
440config SERIAL_SUNZILOG_CONSOLE
441 bool "Console on Sun Zilog8530 serial port"
442 depends on SERIAL_SUNZILOG=y
443 help
444 If you would like to be able to use the Zilog8530 serial port
445 on your Sparc system as the console, you can do so by answering
446 Y to this option.
447
448config SERIAL_SUNSU
449 tristate "Sun SU serial support"
450 depends on (SPARC32 || SPARC64) && PCI
451 help
452 This driver supports the 8250 serial ports that run the keyboard and
453 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
454 to these serial ports.
455
456config SERIAL_SUNSU_CONSOLE
457 bool "Console on Sun SU serial port"
458 depends on SERIAL_SUNSU=y
459 help
460 If you would like to be able to use the SU serial port
461 on your Sparc system as the console, you can do so by answering
462 Y to this option.
463
464config SERIAL_MUX
465 tristate "Serial MUX support"
466 depends on PARISC
467 select SERIAL_CORE
468 default y
469 ---help---
470 Saying Y here will enable the hardware MUX serial driver for
471 the Nova and K class systems. The hardware MUX is not 8250/16550
472 compatible therefore the /dev/ttyB0 device is shared between the
473 Serial MUX and the PDC software console. The following steps
474 need to be completed to use the Serial MUX:
475
476 1. create the device entry (mknod /dev/ttyB0 c 11 0)
477 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
478 3. Add device ttyB0 to /etc/securetty (if you want to log on as
479 root on this console.)
480 4. Change the kernel command console parameter to: console=ttyB0
481
482config SERIAL_MUX_CONSOLE
483 bool "Support for console on serial MUX"
484 depends on SERIAL_MUX
485 select SERIAL_CORE_CONSOLE
486 default y
487
488config PDC_CONSOLE
489 bool "PDC software console support"
490 depends on PARISC && !SERIAL_MUX && VT
491 default n
492 help
493 Saying Y here will enable the software based PDC console to be
494 used as the system console. This is useful for machines in
495 which the hardware based console has not been written yet. The
496 following steps must be competed to use the PDC console:
497
498 1. create the device entry (mknod /dev/ttyB0 c 11 0)
499 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
500 3. Add device ttyB0 to /etc/securetty (if you want to log on as
501 root on this console.)
502 4. Change the kernel command console parameter to: console=ttyB0
503
504config SERIAL_SUNSAB
505 tristate "Sun Siemens SAB82532 serial support"
506 depends on (SPARC32 || SPARC64) && PCI
507 help
508 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
509 (PCI) UltraSPARC systems. Say Y or M if you want to be able to these
510 serial ports.
511
512config SERIAL_SUNSAB_CONSOLE
513 bool "Console on Sun Siemens SAB82532 serial port"
514 depends on SERIAL_SUNSAB=y
515 help
516 If you would like to be able to use the SAB82532 serial port
517 on your Sparc system as the console, you can do so by answering
518 Y to this option.
519
520config SERIAL_IP22_ZILOG
521 tristate "IP22 Zilog8530 serial support"
522 depends on SGI_IP22
523 select SERIAL_CORE
524 help
525 This driver supports the Zilog8530 serial ports found on SGI IP22
526 systems. Say Y or M if you want to be able to these serial ports.
527
528config SERIAL_IP22_ZILOG_CONSOLE
529 bool "Console on IP22 Zilog8530 serial port"
530 depends on SERIAL_IP22_ZILOG=y
531 select SERIAL_CORE_CONSOLE
532
533config V850E_UART
534 bool "NEC V850E on-chip UART support"
535 depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1
536 select SERIAL_CORE
537 default y
538
539config V850E_UARTB
540 bool
541 depends V850E_UART && V850E_ME2
542 default y
543
544config V850E_UART_CONSOLE
545 bool "Use NEC V850E on-chip UART for console"
546 depends on V850E_UART
547 select SERIAL_CORE_CONSOLE
548
549config SERIAL_SH_SCI
550 tristate "SH SCI(F) serial port support"
551 depends on SUPERH || H8300
552 select SERIAL_CORE
553
554config SERIAL_SH_SCI_CONSOLE
555 bool "Support for console on SH SCI(F)"
556 depends on SERIAL_SH_SCI=y
557 select SERIAL_CORE_CONSOLE
558
559config SERIAL_AU1X00
560 bool "Enable Au1x00 UART Support"
561 depends on MIPS && SOC_AU1X00
562 select SERIAL_CORE
563 help
564 If you have an Alchemy AU1X00 processor (MIPS based) and you want
565 to use serial ports, say Y. Otherwise, say N.
566
567config SERIAL_AU1X00_CONSOLE
568 bool "Enable Au1x00 serial console"
569 depends on SERIAL_AU1X00
570 select SERIAL_CORE_CONSOLE
571 help
572 If you have an Alchemy AU1X00 processor (MIPS based) and you want
573 to use a console on a serial port, say Y. Otherwise, say N.
574
575config SERIAL_CORE
576 tristate
577
578config SERIAL_CORE_CONSOLE
579 bool
580
581config SERIAL_68328
582 bool "68328 serial support"
583 depends on M68328 || M68EZ328 || M68VZ328
584 help
585 This driver supports the built-in serial port of the Motorola 68328
586 (standard, EZ and VZ varities).
587
588config SERIAL_68328_RTS_CTS
589 bool "Support RTS/CTS on 68328 serial port"
590 depends on SERIAL_68328
591
592config SERIAL_COLDFIRE
593 bool "ColdFire serial support"
594 depends on COLDFIRE
595 help
596 This driver supports the built-in serial ports of the Motorola ColdFire
597 family of CPUs.
598
599config SERIAL_68360_SMC
600 bool "68360 SMC uart support"
601 depends on M68360
602 help
603 This driver supports the SMC serial ports of the Motorola 68360 CPU.
604
605config SERIAL_68360_SCC
606 bool "68360 SCC uart support"
607 depends on M68360
608 help
609 This driver supports the SCC serial ports of the Motorola 68360 CPU.
610
611config SERIAL_68360
612 bool
613 depends on SERIAL_68360_SMC || SERIAL_68360_SCC
614 default y
615
616config SERIAL_PMACZILOG
617 tristate "PowerMac z85c30 ESCC support"
618 depends on PPC_OF && PPC_PMAC
619 select SERIAL_CORE
620 help
621 This driver supports the Zilog z85C30 serial ports found on
622 PowerMac machines.
623 Say Y or M if you want to be able to these serial ports.
624
625config SERIAL_PMACZILOG_CONSOLE
626 bool "Console on PowerMac z85c30 serial port"
627 depends on SERIAL_PMACZILOG=y
628 select SERIAL_CORE_CONSOLE
629 help
630 If you would like to be able to use the z85c30 serial port
631 on your PowerMac as the console, you can do so by answering
632 Y to this option.
633
634config SERIAL_LH7A40X
635 tristate "Sharp LH7A40X embedded UART support"
636 depends on ARM && ARCH_LH7A40X
637 select SERIAL_CORE
638 help
639 This enables support for the three on-board UARTs of the
640 Sharp LH7A40X series CPUs. Choose Y or M.
641
642config SERIAL_LH7A40X_CONSOLE
643 bool "Support for console on Sharp LH7A40X serial port"
644 depends on SERIAL_LH7A40X=y
645 select SERIAL_CORE_CONSOLE
646 help
647 Say Y here if you wish to use one of the serial ports as the
648 system console--the system console is the device which
649 receives all kernel messages and warnings and which allows
650 logins in single user mode.
651
652 Even if you say Y here, the currently visible framebuffer console
653 (/dev/tty0) will still be used as the default system console, but
654 you can alter that using a kernel command line, for example
655 "console=ttyAM1".
656
657config SERIAL_CPM
658 tristate "CPM SCC/SMC serial port support"
659 depends on CPM2 || 8xx
660 select SERIAL_CORE
661 help
662 This driver supports the SCC and SMC serial ports on Motorola
663 embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
664
665config SERIAL_CPM_CONSOLE
666 bool "Support for console on CPM SCC/SMC serial port"
667 depends on SERIAL_CPM=y
668 select SERIAL_CORE_CONSOLE
669 help
670 Say Y here if you wish to use a SCC or SMC CPM UART as the system
671 console (the system console is the device which receives all kernel
672 messages and warnings and which allows logins in single user mode).
673
674 Even if you say Y here, the currently visible framebuffer console
675 (/dev/tty0) will still be used as the system console by default, but
676 you can alter that using a kernel command line option such as
677 "console=ttyCPM0". (Try "man bootparam" or see the documentation of
678 your boot loader (lilo or loadlin) about how to pass options to the
679 kernel at boot time.)
680
681config SERIAL_CPM_SCC1
682 bool "Support for SCC1 serial port"
683 depends on SERIAL_CPM=y
684 help
685 Select the is option to use SCC1 as a serial port
686
687config SERIAL_CPM_SCC2
688 bool "Support for SCC2 serial port"
689 depends on SERIAL_CPM=y
690 help
691 Select the is option to use SCC2 as a serial port
692
693config SERIAL_CPM_SCC3
694 bool "Support for SCC3 serial port"
695 depends on SERIAL_CPM=y
696 help
697 Select the is option to use SCC3 as a serial port
698
699config SERIAL_CPM_SCC4
700 bool "Support for SCC4 serial port"
701 depends on SERIAL_CPM=y
702 help
703 Select the is option to use SCC4 as a serial port
704
705config SERIAL_CPM_SMC1
706 bool "Support for SMC1 serial port"
707 depends on SERIAL_CPM=y
708 help
709 Select the is option to use SMC1 as a serial port
710
711config SERIAL_CPM_SMC2
712 bool "Support for SMC2 serial port"
713 depends on SERIAL_CPM=y
714 help
715 Select the is option to use SMC2 as a serial port
716
717config SERIAL_SGI_L1_CONSOLE
718 bool "SGI Altix L1 serial console support"
719 depends on IA64_GENERIC || IA64_SGI_SN2
720 select SERIAL_CORE
721 select SERIAL_CORE_CONSOLE
722 help
723 If you have an SGI Altix and you would like to use the system
724 controller serial port as your console (you want this!),
725 say Y. Otherwise, say N.
726
727config SERIAL_MPC52xx
728 tristate "Freescale MPC52xx family PSC serial support"
729 depends on PPC_MPC52xx
730 select SERIAL_CORE
731 help
732 This drivers support the MPC52xx PSC serial ports. If you would
733 like to use them, you must answer Y or M to this option. Not that
734 for use as console, it must be included in kernel and not as a
735 module.
736
737config SERIAL_MPC52xx_CONSOLE
738 bool "Console on a Freescale MPC52xx family PSC serial port"
739 depends on SERIAL_MPC52xx=y
740 select SERIAL_CORE_CONSOLE
741 help
742 Select this options if you'd like to use one of the PSC serial port
743 of the Freescale MPC52xx family as a console.
744
745config SERIAL_MPC52xx_CONSOLE_BAUD
746 int "Freescale MPC52xx family PSC serial port baud"
747 depends on SERIAL_MPC52xx_CONSOLE=y
748 default "9600"
749 help
750 Select the MPC52xx console baud rate.
751 This value is only used if the bootloader doesn't pass in the
752 console baudrate
753
754config SERIAL_ICOM
755 tristate "IBM Multiport Serial Adapter"
Stephen Rothwell145d01e2005-06-21 17:15:52 -0700756 depends on PCI && (PPC_ISERIES || PPC_PSERIES)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700757 select SERIAL_CORE
758 help
759 This driver is for a family of multiport serial adapters
760 including 2 port RVX, 2 port internal modem, 4 port internal
761 modem and a split 1 port RVX and 1 port internal modem.
762
763 This driver can also be built as a module. If so, the module
764 will be called icom.
765
766config SERIAL_M32R_SIO
767 bool "M32R SIO I/F"
768 depends on M32R
769 default y
770 select SERIAL_CORE
771 help
772 Say Y here if you want to use the M32R serial controller.
773
774config SERIAL_M32R_SIO_CONSOLE
775 bool "use SIO console"
776 depends on SERIAL_M32R_SIO=y
777 select SERIAL_CORE_CONSOLE
778 help
779 Say Y here if you want to support a serial console.
780
781 If you use an M3T-M32700UT or an OPSPUT platform,
782 please say also y for SERIAL_M32R_PLDSIO.
783
784config SERIAL_M32R_PLDSIO
785 bool "M32R SIO I/F on a PLD"
786 depends on SERIAL_M32R_SIO=y
787 default n
788 help
789 Say Y here if you want to use the M32R serial controller
790 on a PLD (Programmable Logic Device).
791
792 If you use an M3T-M32700UT or an OPSPUT platform,
793 please say Y.
794
795config SERIAL_TXX9
796 bool "TMPTX39XX/49XX SIO support"
797 depends HAS_TXX9_SERIAL
798 select SERIAL_CORE
799 default y
800
801config HAS_TXX9_SERIAL
802 bool
803
804config SERIAL_TXX9_CONSOLE
805 bool "TMPTX39XX/49XX SIO Console support"
806 depends on SERIAL_TXX9=y
807 select SERIAL_CORE_CONSOLE
808
809config SERIAL_TXX9_STDSERIAL
810 bool "TX39XX/49XX SIO act as standard serial"
811 depends on !SERIAL_8250 && SERIAL_TXX9
812
813config SERIAL_VR41XX
814 tristate "NEC VR4100 series Serial Interface Unit support"
815 depends on CPU_VR41XX
816 select SERIAL_CORE
817 help
818 If you have a NEC VR4100 series processor and you want to use
819 Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU)
820 (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N.
821
822config SERIAL_VR41XX_CONSOLE
823 bool "Enable NEC VR4100 series Serial Interface Unit console"
824 depends on SERIAL_VR41XX
825 select SERIAL_CORE_CONSOLE
826 help
827 If you have a NEC VR4100 series processor and you want to use
828 a console on a serial port, say Y. Otherwise, say N.
829
830config SERIAL_JSM
831 tristate "Digi International NEO PCI Support"
832 depends on PCI
833 select SERIAL_CORE
834 help
835 This is a driver for Digi International's Neo series
836 of cards which provide multiple serial ports. You would need
837 something like this to connect more than two modems to your Linux
838 box, for instance in order to become a dial-in server. This driver
839 supports PCI boards only.
840 If you have a card like this, say Y here and read the file
841 <file:Documentation/jsm.txt>.
842
843 To compile this driver as a module, choose M here: the
844 module will be called jsm.
845
Brent Casavante5d310b2005-06-21 17:16:01 -0700846config SERIAL_SGI_IOC4
847 tristate "SGI IOC4 controller serial support"
848 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
849 select SERIAL_CORE
850 help
851 If you have an SGI Altix with an IOC4 based Base IO card
852 and wish to use the serial ports on this card, say Y.
853 Otherwise, say N.
854
Linus Torvalds1da177e2005-04-16 15:20:36 -0700855endmenu