Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / e6ed90581bfab234ceeff797e1efbd31d0cec219 / . / drivers / regulator / Kconfig
blob: 22b25115ed1479052cbc0ca8efe105e92060951e [file] [log] [blame]
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]1menuconfig REGULATOR
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]2 bool "Voltage and Current Regulator Support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]3 help
4 Generic Voltage and Current Regulator support.
5
6 This framework is designed to provide a generic interface to voltage
7 and current regulators within the Linux kernel. It's intended to
8 provide voltage and current control to client or consumer drivers and
9 also provide status information to user space applications through a
10 sysfs interface.
11
12 The intention is to allow systems to dynamically control regulator
13 output in order to save power and prolong battery life. This applies
14 to both voltage regulators (where voltage output is controllable) and
15 current sinks (where current output is controllable).
16
17 This framework safely compiles out if not selected so that client
18 drivers can still be used in systems with no software controllable
19 regulators.
20
21 If unsure, say no.
22
Mark Brown809d3102012-06-20 11:08:43 +0100[diff] [blame]23
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]24if REGULATOR
25
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]26config REGULATOR_DEBUG
27 bool "Regulator debug support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]28 help
29 Say yes here to enable debugging support.
30
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]31config REGULATOR_DUMMY
32 bool "Provide a dummy regulator if regulator lookups fail"
33 help
34 If this option is enabled then when a regulator lookup fails
35 and the board has not specified that it has provided full
Mark Brown4f842f62012-07-26 15:50:49 +0100[diff] [blame]36 constraints the regulator core will provide an always
37 enabled dummy regulator, allowing consumer drivers to continue.
Mark Brown34abbd62010-02-12 10:18:08 +0000[diff] [blame]38
39 A warning will be generated when this substitution is done.
40
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]41config REGULATOR_FIXED_VOLTAGE
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]42 tristate "Fixed voltage regulator support"
Mark Browna9cb63b2009-01-19 13:37:05 +0000[diff] [blame]43 help
44 This driver provides support for fixed voltage regulators,
45 useful for systems which use a combination of software
46 managed regulators and simple non-configurable regulators.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]47
48config REGULATOR_VIRTUAL_CONSUMER
49 tristate "Virtual regulator consumer support"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]50 help
51 This driver provides a virtual consumer for the voltage and
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]52 current regulator API which provides sysfs controls for
53 configuring the supplies requested. This is mainly useful
54 for test purposes.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]55
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]56 If unsure, say no.
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]57
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]58config REGULATOR_USERSPACE_CONSUMER
59 tristate "Userspace regulator consumer support"
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]60 help
61 There are some classes of devices that are controlled entirely
Michael Prokop6f2653e2009-09-05 02:59:14 +0200[diff] [blame]62 from user space. Userspace consumer driver provides ability to
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]63 control power supplies for such devices.
64
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]65 If unsure, say no.
Mike Rapoport1d98ccc2009-04-26 16:49:39 +0300[diff] [blame]66
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]67config REGULATOR_GPIO
68 tristate "GPIO regulator support"
Heiko Stübnerd162b3c2011-10-11 23:11:01 +0200[diff] [blame]69 depends on GENERIC_GPIO
Heiko Stübner3f0292a2011-10-05 12:27:05 +0200[diff] [blame]70 help
71 This driver provides support for regulators that can be
72 controlled via gpios.
73 It is capable of supporting current and voltage regulators
74 and the platform has to provide a mapping of GPIO-states
75 to target volts/amps.
76
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]77config REGULATOR_AD5398
78 tristate "Analog Devices AD5398/AD5821 regulators"
79 depends on I2C
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]80 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]81 This driver supports AD5398 and AD5821 current regulator chips.
82 If building into module, its name is ad5398.ko.
83
84config REGULATOR_AAT2870
85 tristate "AnalogicTech AAT2870 Regulators"
86 depends on MFD_AAT2870_CORE
87 help
88 If you have a AnalogicTech AAT2870 say Y to enable the
89 regulator driver.
90
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]91config REGULATOR_ARIZONA
92 tristate "Wolfson Arizona class devices"
93 depends on MFD_ARIZONA
Mark Browne6ed9052013-01-10 19:14:11 +0000[diff] [blame^]94 depends on SND_SOC
Mark Brownb667a452012-06-14 18:14:00 +0100[diff] [blame]95 help
96 Support for the regulators found on Wolfson Arizona class
97 devices.
98
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]99config REGULATOR_DA903X
100 tristate "Dialog Semiconductor DA9030/DA9034 regulators"
101 depends on PMIC_DA903X
102 help
103 Say y here to support the BUCKs and LDOs regulators found on
104 Dialog Semiconductor DA9030/DA9034 PMIC.
105
106config REGULATOR_DA9052
107 tristate "Dialog Semiconductor DA9052/DA9053 regulators"
108 depends on PMIC_DA9052
109 help
110 This driver supports the voltage regulators of DA9052-BC and
111 DA9053-AA/Bx PMIC.
112
Ashish Jangamf6130be2012-11-01 13:57:56 +0530[diff] [blame]113config REGULATOR_DA9055
114 tristate "Dialog Semiconductor DA9055 regulators"
115 depends on MFD_DA9055
116 help
117 Say y here to support the BUCKs and LDOs regulators found on
118 Dialog Semiconductor DA9055 PMIC.
119
120 This driver can also be built as a module. If so, the module
121 will be called da9055-regulator.
122
Yunfan Zhang49d8c592012-09-08 03:52:18 -0700[diff] [blame]123config REGULATOR_FAN53555
124 tristate "Fairchild FAN53555 Regulator"
125 depends on I2C
126 select REGMAP_I2C
127 help
128 This driver supports Fairchild FAN53555 Digitally Programmable
129 TinyBuck Regulator. The FAN53555 is a step-down switching voltage
130 regulator that delivers a digitally programmable output from an
131 input voltage supply of 2.5V to 5.5V. The output voltage is
132 programmed through an I2C interface.
133
Ying-Chun Liu (PaulLiu)e3e5aff2012-03-14 10:29:12 +0800[diff] [blame]134config REGULATOR_ANATOP
135 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
Dong Aishengbaa64152012-09-05 10:57:15 +0800[diff] [blame]136 depends on MFD_SYSCON
Ying-Chun Liu (PaulLiu)e3e5aff2012-03-14 10:29:12 +0800[diff] [blame]137 help
138 Say y here to support Freescale i.MX on-chip ANATOP LDOs
139 regulators. It is recommended that this option be
140 enabled on i.MX6 platform.
141
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]142config REGULATOR_MC13XXX_CORE
143 tristate
144
145config REGULATOR_MC13783
146 tristate "Freescale MC13783 regulator driver"
147 depends on MFD_MC13783
148 select REGULATOR_MC13XXX_CORE
149 help
150 Say y here to support the regulators found on the Freescale MC13783
151 PMIC.
152
153config REGULATOR_MC13892
154 tristate "Freescale MC13892 regulator driver"
155 depends on MFD_MC13XXX
156 select REGULATOR_MC13XXX_CORE
157 help
158 Say y here to support the regulators found on the Freescale MC13892
159 PMIC.
160
161config REGULATOR_ISL6271A
162 tristate "Intersil ISL6271A Power regulator"
163 depends on I2C
164 help
165 This driver supports ISL6271A voltage regulator chip.
166
167config REGULATOR_88PM8607
168 bool "Marvell 88PM8607 Power regulators"
169 depends on MFD_88PM860X=y
170 help
171 This driver supports 88PM8607 voltage regulator chips.
Philipp Zabel0eb5d5a2008-07-11 17:28:06 +0200[diff] [blame]172
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]173config REGULATOR_MAX1586
174 tristate "Maxim 1586/1587 voltage regulator"
175 depends on I2C
Robert Jarzmik55f4fa42009-04-23 20:10:43 +0200[diff] [blame]176 help
177 This driver controls a Maxim 1586 or 1587 voltage output
178 regulator via I2C bus. The provided regulator is suitable
179 for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
180
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]181config REGULATOR_MAX8649
182 tristate "Maxim 8649 voltage regulator"
183 depends on I2C
Jonghwan Choic5b68d472011-10-24 22:26:26 +0900[diff] [blame]184 select REGMAP_I2C
Haojian Zhuanga71b7972010-01-25 10:24:09 -0500[diff] [blame]185 help
186 This driver controls a Maxim 8649 voltage output regulator via
187 I2C bus.
188
Wolfram Sang27f37e42009-09-25 09:39:26 +0200[diff] [blame]189config REGULATOR_MAX8660
190 tristate "Maxim 8660/8661 voltage regulator"
191 depends on I2C
192 help
193 This driver controls a Maxim 8660/8661 voltage output
194 regulator via I2C bus.
195
Gyungoh Yooffee1902012-08-09 14:24:34 -0600[diff] [blame]196config REGULATOR_MAX8907
197 tristate "Maxim 8907 voltage regulator"
198 depends on MFD_MAX8907
199 help
200 This driver controls a Maxim 8907 voltage output regulator
201 via I2C bus. The provided regulator is suitable for Tegra
202 chip to control Step-Down DC-DC and LDOs.
203
Haojian Zhuang08ff6f22010-01-11 13:10:08 +0100[diff] [blame]204config REGULATOR_MAX8925
205 tristate "Maxim MAX8925 Power Management IC"
206 depends on MFD_MAX8925
207 help
208 Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
209
MyungJoo Ham202f4f52010-08-20 14:43:56 +0900[diff] [blame]210config REGULATOR_MAX8952
211 tristate "Maxim MAX8952 Power Management IC"
212 depends on I2C
213 help
214 This driver controls a Maxim 8952 voltage output regulator
215 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
216 modes ranging from 0.77V to 1.40V by 0.01V steps.
217
Laxman Dewangan5928f532012-11-19 06:58:29 +0530[diff] [blame]218config REGULATOR_MAX8973
219 tristate "Maxim MAX8973 voltage regulator "
220 depends on I2C
221 select REGMAP_I2C
222 help
223 The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
224 switching regulator delievers up to 9A of output current. Each
225 phase operates at a 2MHz fixed frequency with a 120 deg shift
226 from the adjacent phase, allowing the use of small magnetic component.
227
MyungJoo Hambd6ca2c2011-03-11 11:34:44 +0900[diff] [blame]228config REGULATOR_MAX8997
229 tristate "Maxim 8997/8966 regulator"
230 depends on MFD_MAX8997
231 help
232 This driver controls a Maxim 8997/8966 regulator
233 via I2C bus. The provided regulator is suitable for S5PC110,
234 S5PV210, and Exynos-4 chips to control VCC_CORE and
235 VCC_USIM voltages.
236
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]237config REGULATOR_MAX8998
238 tristate "Maxim 8998 voltage regulator"
Marek Szyprowski69f71002010-06-21 10:04:23 +0200[diff] [blame]239 depends on MFD_MAX8998
Kyungmin Park156f2522010-06-16 09:04:16 +0200[diff] [blame]240 help
241 This driver controls a Maxim 8998 voltage output regulator
242 via I2C bus. The provided regulator is suitable for S3C6410
243 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
244
Jonghwa Lee133d4012012-06-01 13:17:14 +0900[diff] [blame]245config REGULATOR_MAX77686
246 tristate "Maxim 77686 regulator"
247 depends on MFD_MAX77686
248 help
249 This driver controls a Maxim 77686 regulator
250 via I2C bus. The provided regulator is suitable for
251 Exynos-4 chips to control VARM and VINT voltages.
252
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]253config REGULATOR_PCAP
254 tristate "Motorola PCAP2 regulator driver"
255 depends on EZX_PCAP
Sangbeom Kim62aa4922012-01-13 10:13:13 +0900[diff] [blame]256 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]257 This driver provides support for the voltage regulators of the
258 PCAP2 PMIC.
Balaji Rao5ec271e2009-01-09 01:51:01 +0100[diff] [blame]259
Marek Szyprowski0cbdf7b2009-05-19 07:33:55 +0200[diff] [blame]260config REGULATOR_LP3971
261 tristate "National Semiconductors LP3971 PMIC regulator driver"
262 depends on I2C
263 help
264 Say Y here to support the voltage regulators and convertors
265 on National Semiconductors LP3971 PMIC
266
Axel Lin5976f092010-09-16 16:48:49 +0800[diff] [blame]267config REGULATOR_LP3972
268 tristate "National Semiconductors LP3972 PMIC regulator driver"
269 depends on I2C
270 help
271 Say Y here to support the voltage regulators and convertors
272 on National Semiconductors LP3972 PMIC
273
Kim, Miloaf8b5fc2012-06-19 07:08:22 +0000[diff] [blame]274config REGULATOR_LP872X
Mark Brown809d3102012-06-20 11:08:43 +0100[diff] [blame]275 bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
Mark Browndc2060c2012-06-21 10:35:58 +0100[diff] [blame]276 depends on I2C=y
Kim, Miloaf8b5fc2012-06-19 07:08:22 +0000[diff] [blame]277 select REGMAP_I2C
278 help
279 This driver supports LP8720/LP8725 PMIC
280
Kim, Miloade75152012-07-18 14:32:57 +0000[diff] [blame]281config REGULATOR_LP8788
282 bool "TI LP8788 Power Regulators"
283 depends on MFD_LP8788
284 help
285 This driver supports LP8788 voltage regulator chip.
286
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]287config REGULATOR_PCF50633
288 tristate "NXP PCF50633 regulator driver"
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]289 depends on MFD_PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]290 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]291 Say Y here to support the voltage regulators and convertors
292 on PCF50633
Daniel Ribeiro39b17722009-06-27 00:18:02 -0300[diff] [blame]293
Laxman Dewangan6ffc3272012-04-04 12:44:00 +0530[diff] [blame]294config REGULATOR_RC5T583
295 tristate "RICOH RC5T583 Power regulators"
296 depends on MFD_RC5T583
297 help
298 Select this option to enable the power regulator of RICOH
299 PMIC RC5T583.
300 This driver supports the control of different power rails of device
301 through regulator interface. The device supports multiple DCDC/LDO
302 outputs which can be controlled by i2c communication.
303
Sangbeom Kimcb746852012-07-11 21:08:17 +0900[diff] [blame]304config REGULATOR_S2MPS11
305 tristate "Samsung S2MPS11 voltage regulator"
306 depends on MFD_SEC_CORE
307 help
308 This driver supports a Samsung S2MPS11 voltage output regulator
309 via I2C bus. S2MPS11 is comprised of high efficient Buck converters
310 including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
311
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]312config REGULATOR_S5M8767
313 tristate "Samsung S5M8767A voltage regulator"
Sangbeom Kim66c9fbb2012-07-11 21:06:40 +0900[diff] [blame]314 depends on MFD_SEC_CORE
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]315 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]316 This driver supports a Samsung S5M8767A voltage output regulator
317 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
318 supports DVS mode with 8bits of output voltage control.
Yong Shen5e428d52010-12-14 14:00:55 +0800[diff] [blame]319
Linus Walleijd619bc12009-09-09 11:31:00 +0200[diff] [blame]320config REGULATOR_AB3100
321 tristate "ST-Ericsson AB3100 Regulator functions"
322 depends on AB3100_CORE
323 default y if AB3100_CORE
324 help
325 These regulators correspond to functionality in the
326 AB3100 analog baseband dealing with power regulators
327 for the system.
328
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]329config REGULATOR_AB8500
330 bool "ST-Ericsson AB8500 Power Regulators"
331 depends on AB8500_CORE
332 help
333 This driver supports the regulators found on the ST-Ericsson mixed
334 signal AB8500 PMIC
335
336config REGULATOR_DBX500_PRCMU
337 bool
338
339config REGULATOR_DB8500_PRCMU
340 bool "ST-Ericsson DB8500 Voltage Domain Regulators"
341 depends on MFD_DB8500_PRCMU
342 select REGULATOR_DBX500_PRCMU
343 help
344 This driver supports the voltage domain regulators controlled by the
345 DB8500 PRCMU
346
Graeme Gregory4c5dabc2012-05-15 15:48:59 +0900[diff] [blame]347config REGULATOR_PALMAS
348 tristate "TI Palmas PMIC Regulators"
349 depends on MFD_PALMAS
350 help
351 If you wish to control the regulators on the Palmas series of
352 chips say Y here. This will enable support for all the software
353 controllable SMPS/LDO regulators.
354
355 The regulators available on Palmas series chips vary depending
356 on the muxing. This is handled automatically in the driver by
357 reading the mux info from OTP.
358
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]359config REGULATOR_TPS51632
360 tristate "TI TPS51632 Power Regulator"
361 depends on I2C
362 select REGMAP_I2C
363 help
364 This driver supports TPS51632 voltage regulator chip.
Axel Lin7bde7672012-11-01 14:02:36 +0800[diff] [blame]365 The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
Laxman Dewangan0c570672012-10-06 20:47:46 +0530[diff] [blame]366 with Serial VID control and DVFS.
367 The voltage output can be configure through I2C interface or PWM
368 interface.
369
Linus Walleij2edd3b62011-03-09 12:02:55 +0000[diff] [blame]370config REGULATOR_TPS6105X
371 tristate "TI TPS6105X Power regulators"
372 depends on TPS6105X
373 default y if TPS6105X
374 help
375 This driver supports TPS61050/TPS61052 voltage regulator chips.
376 It is a single boost converter primarily for white LEDs and
377 audio amplifiers.
378
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]379config REGULATOR_TPS62360
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]380 tristate "TI TPS6236x Power Regulator"
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]381 depends on I2C
382 select REGMAP_I2C
383 help
Axel Lind1cf4f62012-04-02 18:19:28 +0800[diff] [blame]384 This driver supports TPS6236x voltage regulator chip. This
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]385 regulator is meant for processor core supply. This chip is
386 high-frequency synchronous step down dc-dc converter optimized
387 for battery-powered portable applications.
388
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]389config REGULATOR_TPS65023
390 tristate "TI TPS65023 Power regulators"
391 depends on I2C
Mark Brown90923352011-06-18 01:18:51 +0100[diff] [blame]392 select REGMAP_I2C
Anuj Aggarwal2de79852009-08-21 00:39:44 +0530[diff] [blame]393 help
394 This driver supports TPS65023 voltage regulator chips. TPS65023 provides
395 three step-down converters and two general-purpose LDO voltage regulators.
396 It supports TI's software based Class-2 SmartReflex implementation.
397
398config REGULATOR_TPS6507X
399 tristate "TI TPS6507X Power regulators"
400 depends on I2C
401 help
402 This driver supports TPS6507X voltage regulator chips. TPS6507X provides
403 three step-down converters and two general-purpose LDO voltage regulators.
404 It supports TI's software based Class-2 SmartReflex implementation.
405
Venu Byravarasu452534e2012-03-22 18:34:09 +0530[diff] [blame]406config REGULATOR_TPS65090
407 tristate "TI TPS65090 Power regulator"
408 depends on MFD_TPS65090
409 help
410 This driver provides support for the voltage regulators on the
411 TI TPS65090 PMIC.
412
AnilKumar Cha4930772012-01-11 16:11:49 +0530[diff] [blame]413config REGULATOR_TPS65217
414 tristate "TI TPS65217 Power regulators"
415 depends on MFD_TPS65217
416 help
417 This driver supports TPS65217 voltage regulator chips. TPS65217
418 provides three step-down converters and four general-purpose LDO
419 voltage regulators. It supports software based voltage control
420 for different voltage domains
421
Cyril Chemparathy1394fd22010-12-07 12:04:11 -0500[diff] [blame]422config REGULATOR_TPS6524X
423 tristate "TI TPS6524X Power regulators"
424 depends on SPI
425 help
426 This driver supports TPS6524X voltage regulator chips. TPS6524X
427 provides three step-down converters and two general-purpose LDO
428 voltage regulators. This device is interfaced using a customized
429 serial interface currently supported on the sequencer serial
430 port controller.
431
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]432config REGULATOR_TPS6586X
433 tristate "TI TPS6586X Power regulators"
434 depends on MFD_TPS6586X
435 help
436 This driver supports TPS6586X voltage regulator chips.
437
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]438config REGULATOR_TPS65910
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]439 tristate "TI TPS65910/TPS65911 Power Regulators"
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]440 depends on MFD_TPS65910
441 help
Axel Linae0e6542012-02-21 10:14:55 +0800[diff] [blame]442 This driver supports TPS65910/TPS65911 voltage regulator chips.
Graeme Gregory518fb722011-05-02 16:20:08 -0500[diff] [blame]443
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]444config REGULATOR_TPS65912
445 tristate "TI TPS65912 Power regulator"
446 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]447 help
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]448 This driver supports TPS65912 voltage regulator chip.
Laxman Dewangan62199292012-01-09 20:27:41 +0530[diff] [blame]449
Laxman Dewangan1a0bb672012-11-11 20:42:01 +0530[diff] [blame]450config REGULATOR_TPS80031
451 tristate "TI TPS80031/TPS80032 power regualtor driver"
452 depends on MFD_TPS80031
453 help
454 TPS80031/ TPS80032 Fully Integrated Power Management with Power
455 Path and Battery Charger. It has 5 configurable step-down
456 converters, 11 general purpose LDOs, VBUS generator and digital
457 output to control regulators.
458
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]459config REGULATOR_TWL4030
460 bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
461 depends on TWL4030_CORE
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]462 help
463 This driver supports the voltage regulators provided by
464 this family of companion chips.
465
Pawel Moll31e54082012-09-24 18:56:54 +0100[diff] [blame]466config REGULATOR_VEXPRESS
467 tristate "Versatile Express regulators"
468 depends on VEXPRESS_CONFIG
469 help
470 This driver provides support for voltage regulators available
471 on the ARM Ltd's Versatile Express platform.
472
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]473config REGULATOR_WM831X
Axel Lindfb9b8a2012-02-22 09:29:16 +0800[diff] [blame]474 tristate "Wolfson Microelectronics WM831x PMIC regulators"
Liam Girdwoodba7e4762008-04-30 17:13:42 +0100[diff] [blame]475 depends on MFD_WM831X
476 help
477 Support the voltage and current regulators of the WM831x series
478 of PMIC devices.
479
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]480config REGULATOR_WM8350
481 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
482 depends on MFD_WM8350
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]483 help
484 This driver provides support for the voltage and current regulators
Michael Jonesc6d678b2012-07-26 16:07:23 +0200[diff] [blame]485 of the WM8350 AudioPlus PMIC.
Mark Brown42fad572008-09-11 11:12:01 +0100[diff] [blame]486
487config REGULATOR_WM8400
488 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
489 depends on MFD_WM8400
490 help
491 This driver provides support for the voltage regulators of the
492 WM8400 AudioPlus PMIC.
Mark Brownda091552008-10-10 15:58:15 +0100[diff] [blame]493
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]494config REGULATOR_WM8994
495 tristate "Wolfson Microelectronics WM8994 CODEC"
496 depends on MFD_WM8994
Eric Miao129eef92008-08-27 04:16:08 +0800[diff] [blame]497 help
498 This driver provides support for the voltage regulators on the
499 WM8994 CODEC.
500
Guennadi Liakhovetskif1e64f92012-11-22 11:12:08 +0100[diff] [blame]501config REGULATOR_AS3711
502 tristate "AS3711 PMIC"
503 depends on MFD_AS3711
504 help
505 This driver provides support for the voltage regulators on the
506 AS3711 PMIC
507
Takashi Iwaibbda14d2008-10-30 15:57:05 +0100[diff] [blame]508endif
Sascha Hauer295c08b2009-08-19 01:43:50 +0200[diff] [blame]509