Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 1 | /* |
| 2 | * drivers/media/i2c/lm3560.c |
| 3 | * General device driver for TI lm3560, FLASH LED Driver |
| 4 | * |
| 5 | * Copyright (C) 2013 Texas Instruments |
| 6 | * |
| 7 | * Contact: Daniel Jeong <gshark.jeong@gmail.com> |
| 8 | * Ldd-Mlp <ldd-mlp@list.ti.com> |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or |
| 11 | * modify it under the terms of the GNU General Public License |
| 12 | * version 2 as published by the Free Software Foundation. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, but |
| 15 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 17 | * General Public License for more details. |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 18 | */ |
| 19 | |
| 20 | #include <linux/delay.h> |
| 21 | #include <linux/module.h> |
| 22 | #include <linux/i2c.h> |
| 23 | #include <linux/slab.h> |
| 24 | #include <linux/mutex.h> |
| 25 | #include <linux/regmap.h> |
| 26 | #include <linux/videodev2.h> |
| 27 | #include <media/lm3560.h> |
| 28 | #include <media/v4l2-ctrls.h> |
| 29 | #include <media/v4l2-device.h> |
| 30 | |
| 31 | /* registers definitions */ |
| 32 | #define REG_ENABLE 0x10 |
| 33 | #define REG_TORCH_BR 0xa0 |
| 34 | #define REG_FLASH_BR 0xb0 |
| 35 | #define REG_FLASH_TOUT 0xc0 |
| 36 | #define REG_FLAG 0xd0 |
| 37 | #define REG_CONFIG1 0xe0 |
| 38 | |
Andy Shevchenko | d1166b0 | 2014-02-12 06:02:06 -0300 | [diff] [blame] | 39 | /* fault mask */ |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 40 | #define FAULT_TIMEOUT (1<<0) |
| 41 | #define FAULT_OVERTEMP (1<<1) |
| 42 | #define FAULT_SHORT_CIRCUIT (1<<2) |
| 43 | |
| 44 | enum led_enable { |
| 45 | MODE_SHDN = 0x0, |
| 46 | MODE_TORCH = 0x2, |
| 47 | MODE_FLASH = 0x3, |
| 48 | }; |
| 49 | |
Andy Shevchenko | d1166b0 | 2014-02-12 06:02:06 -0300 | [diff] [blame] | 50 | /** |
| 51 | * struct lm3560_flash |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 52 | * |
| 53 | * @pdata: platform data |
| 54 | * @regmap: reg. map for i2c |
| 55 | * @lock: muxtex for serial access. |
| 56 | * @led_mode: V4L2 LED mode |
| 57 | * @ctrls_led: V4L2 contols |
| 58 | * @subdev_led: V4L2 subdev |
| 59 | */ |
| 60 | struct lm3560_flash { |
| 61 | struct device *dev; |
| 62 | struct lm3560_platform_data *pdata; |
| 63 | struct regmap *regmap; |
| 64 | struct mutex lock; |
| 65 | |
| 66 | enum v4l2_flash_led_mode led_mode; |
| 67 | struct v4l2_ctrl_handler ctrls_led[LM3560_LED_MAX]; |
| 68 | struct v4l2_subdev subdev_led[LM3560_LED_MAX]; |
| 69 | }; |
| 70 | |
| 71 | #define to_lm3560_flash(_ctrl, _no) \ |
| 72 | container_of(_ctrl->handler, struct lm3560_flash, ctrls_led[_no]) |
| 73 | |
| 74 | /* enable mode control */ |
| 75 | static int lm3560_mode_ctrl(struct lm3560_flash *flash) |
| 76 | { |
| 77 | int rval = -EINVAL; |
| 78 | |
| 79 | switch (flash->led_mode) { |
| 80 | case V4L2_FLASH_LED_MODE_NONE: |
| 81 | rval = regmap_update_bits(flash->regmap, |
| 82 | REG_ENABLE, 0x03, MODE_SHDN); |
| 83 | break; |
| 84 | case V4L2_FLASH_LED_MODE_TORCH: |
| 85 | rval = regmap_update_bits(flash->regmap, |
| 86 | REG_ENABLE, 0x03, MODE_TORCH); |
| 87 | break; |
| 88 | case V4L2_FLASH_LED_MODE_FLASH: |
| 89 | rval = regmap_update_bits(flash->regmap, |
| 90 | REG_ENABLE, 0x03, MODE_FLASH); |
| 91 | break; |
| 92 | } |
| 93 | return rval; |
| 94 | } |
| 95 | |
Andy Shevchenko | d1166b0 | 2014-02-12 06:02:06 -0300 | [diff] [blame] | 96 | /* led1/2 enable/disable */ |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 97 | static int lm3560_enable_ctrl(struct lm3560_flash *flash, |
| 98 | enum lm3560_led_id led_no, bool on) |
| 99 | { |
| 100 | int rval; |
| 101 | |
| 102 | if (led_no == LM3560_LED0) { |
Mauro Carvalho Chehab | afb666d | 2014-09-03 15:28:27 -0300 | [diff] [blame] | 103 | if (on) |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 104 | rval = regmap_update_bits(flash->regmap, |
| 105 | REG_ENABLE, 0x08, 0x08); |
| 106 | else |
| 107 | rval = regmap_update_bits(flash->regmap, |
| 108 | REG_ENABLE, 0x08, 0x00); |
| 109 | } else { |
Mauro Carvalho Chehab | afb666d | 2014-09-03 15:28:27 -0300 | [diff] [blame] | 110 | if (on) |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 111 | rval = regmap_update_bits(flash->regmap, |
| 112 | REG_ENABLE, 0x10, 0x10); |
| 113 | else |
| 114 | rval = regmap_update_bits(flash->regmap, |
| 115 | REG_ENABLE, 0x10, 0x00); |
| 116 | } |
| 117 | return rval; |
| 118 | } |
| 119 | |
| 120 | /* torch1/2 brightness control */ |
| 121 | static int lm3560_torch_brt_ctrl(struct lm3560_flash *flash, |
| 122 | enum lm3560_led_id led_no, unsigned int brt) |
| 123 | { |
| 124 | int rval; |
| 125 | u8 br_bits; |
| 126 | |
| 127 | if (brt < LM3560_TORCH_BRT_MIN) |
| 128 | return lm3560_enable_ctrl(flash, led_no, false); |
| 129 | else |
| 130 | rval = lm3560_enable_ctrl(flash, led_no, true); |
| 131 | |
| 132 | br_bits = LM3560_TORCH_BRT_uA_TO_REG(brt); |
| 133 | if (led_no == LM3560_LED0) |
| 134 | rval = regmap_update_bits(flash->regmap, |
| 135 | REG_TORCH_BR, 0x07, br_bits); |
| 136 | else |
| 137 | rval = regmap_update_bits(flash->regmap, |
| 138 | REG_TORCH_BR, 0x38, br_bits << 3); |
| 139 | |
| 140 | return rval; |
| 141 | } |
| 142 | |
| 143 | /* flash1/2 brightness control */ |
| 144 | static int lm3560_flash_brt_ctrl(struct lm3560_flash *flash, |
| 145 | enum lm3560_led_id led_no, unsigned int brt) |
| 146 | { |
| 147 | int rval; |
| 148 | u8 br_bits; |
| 149 | |
| 150 | if (brt < LM3560_FLASH_BRT_MIN) |
| 151 | return lm3560_enable_ctrl(flash, led_no, false); |
| 152 | else |
| 153 | rval = lm3560_enable_ctrl(flash, led_no, true); |
| 154 | |
| 155 | br_bits = LM3560_FLASH_BRT_uA_TO_REG(brt); |
| 156 | if (led_no == LM3560_LED0) |
| 157 | rval = regmap_update_bits(flash->regmap, |
| 158 | REG_FLASH_BR, 0x0f, br_bits); |
| 159 | else |
| 160 | rval = regmap_update_bits(flash->regmap, |
| 161 | REG_FLASH_BR, 0xf0, br_bits << 4); |
| 162 | |
| 163 | return rval; |
| 164 | } |
| 165 | |
Andy Shevchenko | d1166b0 | 2014-02-12 06:02:06 -0300 | [diff] [blame] | 166 | /* v4l2 controls */ |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 167 | static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no) |
| 168 | { |
| 169 | struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no); |
Daniel Jeong | e1c759b | 2013-12-06 02:43:27 -0300 | [diff] [blame] | 170 | int rval = -EINVAL; |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 171 | |
| 172 | mutex_lock(&flash->lock); |
| 173 | |
| 174 | if (ctrl->id == V4L2_CID_FLASH_FAULT) { |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 175 | s32 fault = 0; |
| 176 | unsigned int reg_val; |
| 177 | rval = regmap_read(flash->regmap, REG_FLAG, ®_val); |
| 178 | if (rval < 0) |
Daniel Jeong | e1c759b | 2013-12-06 02:43:27 -0300 | [diff] [blame] | 179 | goto out; |
| 180 | if (reg_val & FAULT_SHORT_CIRCUIT) |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 181 | fault |= V4L2_FLASH_FAULT_SHORT_CIRCUIT; |
Daniel Jeong | e1c759b | 2013-12-06 02:43:27 -0300 | [diff] [blame] | 182 | if (reg_val & FAULT_OVERTEMP) |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 183 | fault |= V4L2_FLASH_FAULT_OVER_TEMPERATURE; |
Daniel Jeong | e1c759b | 2013-12-06 02:43:27 -0300 | [diff] [blame] | 184 | if (reg_val & FAULT_TIMEOUT) |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 185 | fault |= V4L2_FLASH_FAULT_TIMEOUT; |
| 186 | ctrl->cur.val = fault; |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 187 | } |
| 188 | |
Daniel Jeong | e1c759b | 2013-12-06 02:43:27 -0300 | [diff] [blame] | 189 | out: |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 190 | mutex_unlock(&flash->lock); |
Daniel Jeong | e1c759b | 2013-12-06 02:43:27 -0300 | [diff] [blame] | 191 | return rval; |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 192 | } |
| 193 | |
| 194 | static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no) |
| 195 | { |
| 196 | struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no); |
| 197 | u8 tout_bits; |
| 198 | int rval = -EINVAL; |
| 199 | |
| 200 | mutex_lock(&flash->lock); |
| 201 | |
| 202 | switch (ctrl->id) { |
| 203 | case V4L2_CID_FLASH_LED_MODE: |
| 204 | flash->led_mode = ctrl->val; |
| 205 | if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) |
| 206 | rval = lm3560_mode_ctrl(flash); |
| 207 | break; |
| 208 | |
| 209 | case V4L2_CID_FLASH_STROBE_SOURCE: |
| 210 | rval = regmap_update_bits(flash->regmap, |
| 211 | REG_CONFIG1, 0x04, (ctrl->val) << 2); |
| 212 | if (rval < 0) |
| 213 | goto err_out; |
| 214 | break; |
| 215 | |
| 216 | case V4L2_CID_FLASH_STROBE: |
Wei Yongjun | eed8c3e | 2013-11-07 09:44:42 -0300 | [diff] [blame] | 217 | if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) { |
| 218 | rval = -EBUSY; |
| 219 | goto err_out; |
| 220 | } |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 221 | flash->led_mode = V4L2_FLASH_LED_MODE_FLASH; |
| 222 | rval = lm3560_mode_ctrl(flash); |
| 223 | break; |
| 224 | |
| 225 | case V4L2_CID_FLASH_STROBE_STOP: |
Wei Yongjun | eed8c3e | 2013-11-07 09:44:42 -0300 | [diff] [blame] | 226 | if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) { |
| 227 | rval = -EBUSY; |
| 228 | goto err_out; |
| 229 | } |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 230 | flash->led_mode = V4L2_FLASH_LED_MODE_NONE; |
| 231 | rval = lm3560_mode_ctrl(flash); |
| 232 | break; |
| 233 | |
| 234 | case V4L2_CID_FLASH_TIMEOUT: |
| 235 | tout_bits = LM3560_FLASH_TOUT_ms_TO_REG(ctrl->val); |
| 236 | rval = regmap_update_bits(flash->regmap, |
| 237 | REG_FLASH_TOUT, 0x1f, tout_bits); |
| 238 | break; |
| 239 | |
| 240 | case V4L2_CID_FLASH_INTENSITY: |
| 241 | rval = lm3560_flash_brt_ctrl(flash, led_no, ctrl->val); |
| 242 | break; |
| 243 | |
| 244 | case V4L2_CID_FLASH_TORCH_INTENSITY: |
| 245 | rval = lm3560_torch_brt_ctrl(flash, led_no, ctrl->val); |
| 246 | break; |
| 247 | } |
| 248 | |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 249 | err_out: |
Wei Yongjun | eed8c3e | 2013-11-07 09:44:42 -0300 | [diff] [blame] | 250 | mutex_unlock(&flash->lock); |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 251 | return rval; |
| 252 | } |
| 253 | |
| 254 | static int lm3560_led1_get_ctrl(struct v4l2_ctrl *ctrl) |
| 255 | { |
| 256 | return lm3560_get_ctrl(ctrl, LM3560_LED1); |
| 257 | } |
| 258 | |
| 259 | static int lm3560_led1_set_ctrl(struct v4l2_ctrl *ctrl) |
| 260 | { |
| 261 | return lm3560_set_ctrl(ctrl, LM3560_LED1); |
| 262 | } |
| 263 | |
| 264 | static int lm3560_led0_get_ctrl(struct v4l2_ctrl *ctrl) |
| 265 | { |
| 266 | return lm3560_get_ctrl(ctrl, LM3560_LED0); |
| 267 | } |
| 268 | |
| 269 | static int lm3560_led0_set_ctrl(struct v4l2_ctrl *ctrl) |
| 270 | { |
| 271 | return lm3560_set_ctrl(ctrl, LM3560_LED0); |
| 272 | } |
| 273 | |
| 274 | static const struct v4l2_ctrl_ops lm3560_led_ctrl_ops[LM3560_LED_MAX] = { |
| 275 | [LM3560_LED0] = { |
| 276 | .g_volatile_ctrl = lm3560_led0_get_ctrl, |
| 277 | .s_ctrl = lm3560_led0_set_ctrl, |
| 278 | }, |
| 279 | [LM3560_LED1] = { |
| 280 | .g_volatile_ctrl = lm3560_led1_get_ctrl, |
| 281 | .s_ctrl = lm3560_led1_set_ctrl, |
| 282 | } |
| 283 | }; |
| 284 | |
| 285 | static int lm3560_init_controls(struct lm3560_flash *flash, |
| 286 | enum lm3560_led_id led_no) |
| 287 | { |
| 288 | struct v4l2_ctrl *fault; |
| 289 | u32 max_flash_brt = flash->pdata->max_flash_brt[led_no]; |
| 290 | u32 max_torch_brt = flash->pdata->max_torch_brt[led_no]; |
| 291 | struct v4l2_ctrl_handler *hdl = &flash->ctrls_led[led_no]; |
| 292 | const struct v4l2_ctrl_ops *ops = &lm3560_led_ctrl_ops[led_no]; |
| 293 | |
| 294 | v4l2_ctrl_handler_init(hdl, 8); |
Andy Shevchenko | d1166b0 | 2014-02-12 06:02:06 -0300 | [diff] [blame] | 295 | |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 296 | /* flash mode */ |
| 297 | v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_LED_MODE, |
| 298 | V4L2_FLASH_LED_MODE_TORCH, ~0x7, |
| 299 | V4L2_FLASH_LED_MODE_NONE); |
| 300 | flash->led_mode = V4L2_FLASH_LED_MODE_NONE; |
| 301 | |
| 302 | /* flash source */ |
| 303 | v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_STROBE_SOURCE, |
| 304 | 0x1, ~0x3, V4L2_FLASH_STROBE_SOURCE_SOFTWARE); |
| 305 | |
| 306 | /* flash strobe */ |
| 307 | v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0); |
Andy Shevchenko | d1166b0 | 2014-02-12 06:02:06 -0300 | [diff] [blame] | 308 | |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 309 | /* flash strobe stop */ |
| 310 | v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0); |
| 311 | |
| 312 | /* flash strobe timeout */ |
| 313 | v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TIMEOUT, |
| 314 | LM3560_FLASH_TOUT_MIN, |
| 315 | flash->pdata->max_flash_timeout, |
| 316 | LM3560_FLASH_TOUT_STEP, |
| 317 | flash->pdata->max_flash_timeout); |
| 318 | |
| 319 | /* flash brt */ |
| 320 | v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_INTENSITY, |
| 321 | LM3560_FLASH_BRT_MIN, max_flash_brt, |
| 322 | LM3560_FLASH_BRT_STEP, max_flash_brt); |
| 323 | |
| 324 | /* torch brt */ |
| 325 | v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TORCH_INTENSITY, |
| 326 | LM3560_TORCH_BRT_MIN, max_torch_brt, |
| 327 | LM3560_TORCH_BRT_STEP, max_torch_brt); |
| 328 | |
| 329 | /* fault */ |
| 330 | fault = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_FAULT, 0, |
| 331 | V4L2_FLASH_FAULT_OVER_VOLTAGE |
| 332 | | V4L2_FLASH_FAULT_OVER_TEMPERATURE |
| 333 | | V4L2_FLASH_FAULT_SHORT_CIRCUIT |
| 334 | | V4L2_FLASH_FAULT_TIMEOUT, 0, 0); |
| 335 | if (fault != NULL) |
| 336 | fault->flags |= V4L2_CTRL_FLAG_VOLATILE; |
| 337 | |
| 338 | if (hdl->error) |
| 339 | return hdl->error; |
| 340 | |
| 341 | flash->subdev_led[led_no].ctrl_handler = hdl; |
| 342 | return 0; |
| 343 | } |
| 344 | |
| 345 | /* initialize device */ |
| 346 | static const struct v4l2_subdev_ops lm3560_ops = { |
| 347 | .core = NULL, |
| 348 | }; |
| 349 | |
| 350 | static const struct regmap_config lm3560_regmap = { |
| 351 | .reg_bits = 8, |
| 352 | .val_bits = 8, |
| 353 | .max_register = 0xFF, |
| 354 | }; |
| 355 | |
| 356 | static int lm3560_subdev_init(struct lm3560_flash *flash, |
| 357 | enum lm3560_led_id led_no, char *led_name) |
| 358 | { |
| 359 | struct i2c_client *client = to_i2c_client(flash->dev); |
| 360 | int rval; |
| 361 | |
| 362 | v4l2_i2c_subdev_init(&flash->subdev_led[led_no], client, &lm3560_ops); |
| 363 | flash->subdev_led[led_no].flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| 364 | strcpy(flash->subdev_led[led_no].name, led_name); |
| 365 | rval = lm3560_init_controls(flash, led_no); |
| 366 | if (rval) |
| 367 | goto err_out; |
| 368 | rval = media_entity_init(&flash->subdev_led[led_no].entity, 0, NULL, 0); |
| 369 | if (rval < 0) |
| 370 | goto err_out; |
| 371 | flash->subdev_led[led_no].entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; |
| 372 | |
| 373 | return rval; |
| 374 | |
| 375 | err_out: |
| 376 | v4l2_ctrl_handler_free(&flash->ctrls_led[led_no]); |
| 377 | return rval; |
| 378 | } |
| 379 | |
| 380 | static int lm3560_init_device(struct lm3560_flash *flash) |
| 381 | { |
| 382 | int rval; |
| 383 | unsigned int reg_val; |
| 384 | |
| 385 | /* set peak current */ |
| 386 | rval = regmap_update_bits(flash->regmap, |
| 387 | REG_FLASH_TOUT, 0x60, flash->pdata->peak); |
| 388 | if (rval < 0) |
| 389 | return rval; |
| 390 | /* output disable */ |
| 391 | flash->led_mode = V4L2_FLASH_LED_MODE_NONE; |
| 392 | rval = lm3560_mode_ctrl(flash); |
| 393 | if (rval < 0) |
| 394 | return rval; |
Andy Shevchenko | d1166b0 | 2014-02-12 06:02:06 -0300 | [diff] [blame] | 395 | /* reset faults */ |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 396 | rval = regmap_read(flash->regmap, REG_FLAG, ®_val); |
| 397 | return rval; |
| 398 | } |
| 399 | |
| 400 | static int lm3560_probe(struct i2c_client *client, |
| 401 | const struct i2c_device_id *devid) |
| 402 | { |
| 403 | struct lm3560_flash *flash; |
| 404 | struct lm3560_platform_data *pdata = dev_get_platdata(&client->dev); |
| 405 | int rval; |
| 406 | |
| 407 | flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); |
| 408 | if (flash == NULL) |
| 409 | return -ENOMEM; |
| 410 | |
| 411 | flash->regmap = devm_regmap_init_i2c(client, &lm3560_regmap); |
| 412 | if (IS_ERR(flash->regmap)) { |
| 413 | rval = PTR_ERR(flash->regmap); |
| 414 | return rval; |
| 415 | } |
| 416 | |
| 417 | /* if there is no platform data, use chip default value */ |
| 418 | if (pdata == NULL) { |
Andy Shevchenko | 341ef56 | 2014-02-12 06:02:07 -0300 | [diff] [blame] | 419 | pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 420 | if (pdata == NULL) |
| 421 | return -ENODEV; |
| 422 | pdata->peak = LM3560_PEAK_3600mA; |
| 423 | pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX; |
| 424 | /* led 1 */ |
| 425 | pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX; |
| 426 | pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX; |
| 427 | /* led 2 */ |
| 428 | pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX; |
| 429 | pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX; |
| 430 | } |
| 431 | flash->pdata = pdata; |
| 432 | flash->dev = &client->dev; |
| 433 | mutex_init(&flash->lock); |
| 434 | |
| 435 | rval = lm3560_subdev_init(flash, LM3560_LED0, "lm3560-led0"); |
| 436 | if (rval < 0) |
| 437 | return rval; |
| 438 | |
| 439 | rval = lm3560_subdev_init(flash, LM3560_LED1, "lm3560-led1"); |
| 440 | if (rval < 0) |
| 441 | return rval; |
| 442 | |
| 443 | rval = lm3560_init_device(flash); |
| 444 | if (rval < 0) |
| 445 | return rval; |
| 446 | |
Wei Yongjun | cc58f4d | 2013-11-08 21:24:18 -0300 | [diff] [blame] | 447 | i2c_set_clientdata(client, flash); |
| 448 | |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 449 | return 0; |
| 450 | } |
| 451 | |
| 452 | static int lm3560_remove(struct i2c_client *client) |
| 453 | { |
Wei Yongjun | cc58f4d | 2013-11-08 21:24:18 -0300 | [diff] [blame] | 454 | struct lm3560_flash *flash = i2c_get_clientdata(client); |
Daniel Jeong | 7f6b11a | 2013-10-16 04:12:19 -0300 | [diff] [blame] | 455 | unsigned int i; |
| 456 | |
| 457 | for (i = LM3560_LED0; i < LM3560_LED_MAX; i++) { |
| 458 | v4l2_device_unregister_subdev(&flash->subdev_led[i]); |
| 459 | v4l2_ctrl_handler_free(&flash->ctrls_led[i]); |
| 460 | media_entity_cleanup(&flash->subdev_led[i].entity); |
| 461 | } |
| 462 | |
| 463 | return 0; |
| 464 | } |
| 465 | |
| 466 | static const struct i2c_device_id lm3560_id_table[] = { |
| 467 | {LM3560_NAME, 0}, |
| 468 | {} |
| 469 | }; |
| 470 | |
| 471 | MODULE_DEVICE_TABLE(i2c, lm3560_id_table); |
| 472 | |
| 473 | static struct i2c_driver lm3560_i2c_driver = { |
| 474 | .driver = { |
| 475 | .name = LM3560_NAME, |
| 476 | .pm = NULL, |
| 477 | }, |
| 478 | .probe = lm3560_probe, |
| 479 | .remove = lm3560_remove, |
| 480 | .id_table = lm3560_id_table, |
| 481 | }; |
| 482 | |
| 483 | module_i2c_driver(lm3560_i2c_driver); |
| 484 | |
| 485 | MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>"); |
| 486 | MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>"); |
| 487 | MODULE_DESCRIPTION("Texas Instruments LM3560 LED flash driver"); |
| 488 | MODULE_LICENSE("GPL"); |