drivers/tty/tty_buffer.c

/*
 * Tty buffer allocation management
 */

#include <linux/types.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/ratelimit.h>


#define MIN_TTYB_SIZE	256
#define TTYB_ALIGN_MASK	255

/*
 * Byte threshold to limit memory consumption for flip buffers.
 * The actual memory limit is > 2x this amount.
 */
#define TTYB_MEM_LIMIT	65536


/**
 *	tty_buffer_space_avail	-	return unused buffer space
 *	@port - tty_port owning the flip buffer
 *
 *	Returns the # of bytes which can be written by the driver without
 *	reaching the buffer limit.
 *
 *	Note: this does not guarantee that memory is available to write
 *	the returned # of bytes (use tty_prepare_flip_string_xxx() to
 *	pre-allocate if memory guarantee is required).
 */

int tty_buffer_space_avail(struct tty_port *port)
{
	int space = TTYB_MEM_LIMIT - atomic_read(&port->buf.memory_used);
	return max(space, 0);
}

static void tty_buffer_reset(struct tty_buffer *p, size_t size)
{
	p->used = 0;
	p->size = size;
	p->next = NULL;
	p->commit = 0;
	p->read = 0;
}

/**
 *	tty_buffer_free_all		-	free buffers used by a tty
 *	@tty: tty to free from
 *
 *	Remove all the buffers pending on a tty whether queued with data
 *	or in the free ring. Must be called when the tty is no longer in use
 */

void tty_buffer_free_all(struct tty_port *port)
{
	struct tty_bufhead *buf = &port->buf;
	struct tty_buffer *p, *next;
	struct llist_node *llist;

	while ((p = buf->head) != NULL) {
		buf->head = p->next;
		if (p->size > 0)
			kfree(p);
	}
	llist = llist_del_all(&buf->free);
	llist_for_each_entry_safe(p, next, llist, free)
		kfree(p);

	tty_buffer_reset(&buf->sentinel, 0);
	buf->head = &buf->sentinel;
	buf->tail = &buf->sentinel;

	atomic_set(&buf->memory_used, 0);
}

/**
 *	tty_buffer_alloc	-	allocate a tty buffer
 *	@tty: tty device
 *	@size: desired size (characters)
 *
 *	Allocate a new tty buffer to hold the desired number of characters.
 *	We round our buffers off in 256 character chunks to get better
 *	allocation behaviour.
 *	Return NULL if out of memory or the allocation would exceed the
 *	per device queue
 */

static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
{
	struct llist_node *free;
	struct tty_buffer *p;

	/* Round the buffer size out */
	size = __ALIGN_MASK(size, TTYB_ALIGN_MASK);

	if (size <= MIN_TTYB_SIZE) {
		free = llist_del_first(&port->buf.free);
		if (free) {
			p = llist_entry(free, struct tty_buffer, free);
			goto found;
		}
	}

	/* Should possibly check if this fails for the largest buffer we
	   have queued and recycle that ? */
	if (atomic_read(&port->buf.memory_used) > TTYB_MEM_LIMIT)
		return NULL;
	p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
	if (p == NULL)
		return NULL;

found:
	tty_buffer_reset(p, size);
	atomic_add(size, &port->buf.memory_used);
	return p;
}

/**
 *	tty_buffer_free		-	free a tty buffer
 *	@tty: tty owning the buffer
 *	@b: the buffer to free
 *
 *	Free a tty buffer, or add it to the free list according to our
 *	internal strategy
 */

static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
{
	struct tty_bufhead *buf = &port->buf;

	/* Dumb strategy for now - should keep some stats */
	WARN_ON(atomic_sub_return(b->size, &buf->memory_used) < 0);

	if (b->size > MIN_TTYB_SIZE)
		kfree(b);
	else if (b->size > 0)
		llist_add(&b->free, &buf->free);
}

/**
 *	__tty_buffer_flush		-	flush full tty buffers
 *	@tty: tty to flush
 *
 *	flush all the buffers containing receive data. Caller must
 *	hold the buffer lock and must have ensured no parallel flush to
 *	ldisc is running.
 */

static void __tty_buffer_flush(struct tty_port *port)
{
	struct tty_bufhead *buf = &port->buf;
	struct tty_buffer *next;

	while ((next = buf->head->next) != NULL) {
		tty_buffer_free(port, buf->head);
		buf->head = next;
	}
	WARN_ON(buf->head != buf->tail);
	buf->head->read = buf->head->commit;
}

/**
 *	tty_buffer_flush		-	flush full tty buffers
 *	@tty: tty to flush
 *
 *	flush all the buffers containing receive data. If the buffer is
 *	being processed by flush_to_ldisc then we defer the processing
 *	to that function
 *
 *	Locking: takes flush_mutex to ensure single-threaded flip buffer
 *		 'consumer'
 */

void tty_buffer_flush(struct tty_struct *tty)
{
	struct tty_port *port = tty->port;
	struct tty_bufhead *buf = &port->buf;

	mutex_lock(&buf->flush_mutex);
	/* If the data is being pushed to the tty layer then we can't
	   process it here. Instead set a flag and the flush_to_ldisc
	   path will process the flush request before it exits */
	if (test_bit(TTYP_FLUSHING, &port->iflags)) {
		set_bit(TTYP_FLUSHPENDING, &port->iflags);
		mutex_unlock(&buf->flush_mutex);
		wait_event(tty->read_wait,
				test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
		return;
	}

	__tty_buffer_flush(port);
	mutex_unlock(&buf->flush_mutex);
}

/**
 *	tty_buffer_request_room		-	grow tty buffer if needed
 *	@tty: tty structure
 *	@size: size desired
 *
 *	Make at least size bytes of linear space available for the tty
 *	buffer. If we fail return the size we managed to find.
 */
int tty_buffer_request_room(struct tty_port *port, size_t size)
{
	struct tty_bufhead *buf = &port->buf;
	struct tty_buffer *b, *n;
	int left;

	b = buf->tail;
	left = b->size - b->used;

	if (left < size) {
		/* This is the slow path - looking for new buffers to use */
		if ((n = tty_buffer_alloc(port, size)) != NULL) {
			buf->tail = n;
			b->commit = b->used;
			smp_mb();
			b->next = n;
		} else
			size = left;
	}
	return size;
}
EXPORT_SYMBOL_GPL(tty_buffer_request_room);

/**
 *	tty_insert_flip_string_fixed_flag - Add characters to the tty buffer
 *	@port: tty port
 *	@chars: characters
 *	@flag: flag value for each character
 *	@size: size
 *
 *	Queue a series of bytes to the tty buffering. All the characters
 *	passed are marked with the supplied flag. Returns the number added.
 */

int tty_insert_flip_string_fixed_flag(struct tty_port *port,
		const unsigned char *chars, char flag, size_t size)
{
	int copied = 0;
	do {
		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
		int space = tty_buffer_request_room(port, goal);
		struct tty_buffer *tb = port->buf.tail;
		if (unlikely(space == 0))
			break;
		memcpy(char_buf_ptr(tb, tb->used), chars, space);
		memset(flag_buf_ptr(tb, tb->used), flag, space);
		tb->used += space;
		copied += space;
		chars += space;
		/* There is a small chance that we need to split the data over
		   several buffers. If this is the case we must loop */
	} while (unlikely(size > copied));
	return copied;
}
EXPORT_SYMBOL(tty_insert_flip_string_fixed_flag);

/**
 *	tty_insert_flip_string_flags	-	Add characters to the tty buffer
 *	@port: tty port
 *	@chars: characters
 *	@flags: flag bytes
 *	@size: size
 *
 *	Queue a series of bytes to the tty buffering. For each character
 *	the flags array indicates the status of the character. Returns the
 *	number added.
 */

int tty_insert_flip_string_flags(struct tty_port *port,
		const unsigned char *chars, const char *flags, size_t size)
{
	int copied = 0;
	do {
		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
		int space = tty_buffer_request_room(port, goal);
		struct tty_buffer *tb = port->buf.tail;
		if (unlikely(space == 0))
			break;
		memcpy(char_buf_ptr(tb, tb->used), chars, space);
		memcpy(flag_buf_ptr(tb, tb->used), flags, space);
		tb->used += space;
		copied += space;
		chars += space;
		flags += space;
		/* There is a small chance that we need to split the data over
		   several buffers. If this is the case we must loop */
	} while (unlikely(size > copied));
	return copied;
}
EXPORT_SYMBOL(tty_insert_flip_string_flags);

/**
 *	tty_schedule_flip	-	push characters to ldisc
 *	@port: tty port to push from
 *
 *	Takes any pending buffers and transfers their ownership to the
 *	ldisc side of the queue. It then schedules those characters for
 *	processing by the line discipline.
 *	Note that this function can only be used when the low_latency flag
 *	is unset. Otherwise the workqueue won't be flushed.
 */

void tty_schedule_flip(struct tty_port *port)
{
	struct tty_bufhead *buf = &port->buf;
	WARN_ON(port->low_latency);

	buf->tail->commit = buf->tail->used;
	schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_schedule_flip);

/**
 *	tty_prepare_flip_string		-	make room for characters
 *	@port: tty port
 *	@chars: return pointer for character write area
 *	@size: desired size
 *
 *	Prepare a block of space in the buffer for data. Returns the length
 *	available and buffer pointer to the space which is now allocated and
 *	accounted for as ready for normal characters. This is used for drivers
 *	that need their own block copy routines into the buffer. There is no
 *	guarantee the buffer is a DMA target!
 */

int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars,
		size_t size)
{
	int space = tty_buffer_request_room(port, size);
	if (likely(space)) {
		struct tty_buffer *tb = port->buf.tail;
		*chars = char_buf_ptr(tb, tb->used);
		memset(flag_buf_ptr(tb, tb->used), TTY_NORMAL, space);
		tb->used += space;
	}
	return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string);

/**
 *	tty_prepare_flip_string_flags	-	make room for characters
 *	@port: tty port
 *	@chars: return pointer for character write area
 *	@flags: return pointer for status flag write area
 *	@size: desired size
 *
 *	Prepare a block of space in the buffer for data. Returns the length
 *	available and buffer pointer to the space which is now allocated and
 *	accounted for as ready for characters. This is used for drivers
 *	that need their own block copy routines into the buffer. There is no
 *	guarantee the buffer is a DMA target!
 */

int tty_prepare_flip_string_flags(struct tty_port *port,
			unsigned char **chars, char **flags, size_t size)
{
	int space = tty_buffer_request_room(port, size);
	if (likely(space)) {
		struct tty_buffer *tb = port->buf.tail;
		*chars = char_buf_ptr(tb, tb->used);
		*flags = flag_buf_ptr(tb, tb->used);
		tb->used += space;
	}
	return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);


static int
receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
{
	struct tty_ldisc *disc = tty->ldisc;
	unsigned char *p = char_buf_ptr(head, head->read);
	char	      *f = flag_buf_ptr(head, head->read);

	if (disc->ops->receive_buf2)
		count = disc->ops->receive_buf2(tty, p, f, count);
	else {
		count = min_t(int, count, tty->receive_room);
		if (count)
			disc->ops->receive_buf(tty, p, f, count);
	}
	head->read += count;
	return count;
}

/**
 *	flush_to_ldisc
 *	@work: tty structure passed from work queue.
 *
 *	This routine is called out of the software interrupt to flush data
 *	from the buffer chain to the line discipline.
 *
 *	The receive_buf method is single threaded for each tty instance.
 *
 *	Locking: takes flush_mutex to ensure single-threaded flip buffer
 *		 'consumer'
 */

static void flush_to_ldisc(struct work_struct *work)
{
	struct tty_port *port = container_of(work, struct tty_port, buf.work);
	struct tty_bufhead *buf = &port->buf;
	struct tty_struct *tty;
	struct tty_ldisc *disc;

	tty = port->itty;
	if (tty == NULL)
		return;

	disc = tty_ldisc_ref(tty);
	if (disc == NULL)
		return;

	mutex_lock(&buf->flush_mutex);

	if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
		while (1) {
			struct tty_buffer *head = buf->head;
			int count;

			count = head->commit - head->read;
			if (!count) {
				if (head->next == NULL)
					break;
				buf->head = head->next;
				tty_buffer_free(port, head);
				continue;
			}

			mutex_unlock(&buf->flush_mutex);

			count = receive_buf(tty, head, count);

			mutex_lock(&buf->flush_mutex);

			/* Ldisc or user is trying to flush the buffers.
			   We may have a deferred request to flush the
			   input buffer, if so pull the chain under the lock
			   and empty the queue */
			if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
				__tty_buffer_flush(port);
				clear_bit(TTYP_FLUSHPENDING, &port->iflags);
				wake_up(&tty->read_wait);
				break;
			} else if (!count)
				break;
		}
		clear_bit(TTYP_FLUSHING, &port->iflags);
	}

	mutex_unlock(&buf->flush_mutex);

	tty_ldisc_deref(disc);
}

/**
 *	tty_flush_to_ldisc
 *	@tty: tty to push
 *
 *	Push the terminal flip buffers to the line discipline.
 *
 *	Must not be called from IRQ context.
 */
void tty_flush_to_ldisc(struct tty_struct *tty)
{
	if (!tty->port->low_latency)
		flush_work(&tty->port->buf.work);
}

/**
 *	tty_flip_buffer_push	-	terminal
 *	@port: tty port to push
 *
 *	Queue a push of the terminal flip buffers to the line discipline. This
 *	function must not be called from IRQ context if port->low_latency is
 *	set.
 *
 *	In the event of the queue being busy for flipping the work will be
 *	held off and retried later.
 */

void tty_flip_buffer_push(struct tty_port *port)
{
	struct tty_bufhead *buf = &port->buf;

	buf->tail->commit = buf->tail->used;

	if (port->low_latency)
		flush_to_ldisc(&buf->work);
	else
		schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_flip_buffer_push);

/**
 *	tty_buffer_init		-	prepare a tty buffer structure
 *	@tty: tty to initialise
 *
 *	Set up the initial state of the buffer management for a tty device.
 *	Must be called before the other tty buffer functions are used.
 */

void tty_buffer_init(struct tty_port *port)
{
	struct tty_bufhead *buf = &port->buf;

	mutex_init(&buf->flush_mutex);
	tty_buffer_reset(&buf->sentinel, 0);
	buf->head = &buf->sentinel;
	buf->tail = &buf->sentinel;
	init_llist_head(&buf->free);
	atomic_set(&buf->memory_used, 0);
	INIT_WORK(&buf->work, flush_to_ldisc);
}