blob: d712e7af780c8151755eb174b5272da0c4f545de [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#define RCS_ID "$Id: scc.c,v 1.75 1998/11/04 15:15:01 jreuter Exp jreuter $"
2
3#define VERSION "3.0"
4
5/*
6 * Please use z8530drv-utils-3.0 with this version.
7 * ------------------
8 *
9 * You can find a subset of the documentation in
10 * Documentation/networking/z8530drv.txt.
11 */
12
13/*
14 ********************************************************************
15 * SCC.C - Linux driver for Z8530 based HDLC cards for AX.25 *
16 ********************************************************************
17
18
19 ********************************************************************
20
21 Copyright (c) 1993, 2000 Joerg Reuter DL1BKE
22
23 portions (c) 1993 Guido ten Dolle PE1NNZ
24
25 ********************************************************************
26
27 The driver and the programs in the archive are UNDER CONSTRUCTION.
28 The code is likely to fail, and so your kernel could --- even
29 a whole network.
30
31 This driver is intended for Amateur Radio use. If you are running it
32 for commercial purposes, please drop me a note. I am nosy...
33
34 ...BUT:
35
36 ! You m u s t recognize the appropriate legislations of your country !
37 ! before you connect a radio to the SCC board and start to transmit or !
38 ! receive. The GPL allows you to use the d r i v e r, NOT the RADIO! !
39
40 For non-Amateur-Radio use please note that you might need a special
41 allowance/licence from the designer of the SCC Board and/or the
42 MODEM.
43
44 This program is free software; you can redistribute it and/or modify
45 it under the terms of the (modified) GNU General Public License
46 delivered with the Linux kernel source.
47
48 This program is distributed in the hope that it will be useful,
49 but WITHOUT ANY WARRANTY; without even the implied warranty of
50 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
51 GNU General Public License for more details.
52
53 You should find a copy of the GNU General Public License in
54 /usr/src/linux/COPYING;
55
56 ********************************************************************
57
58
59 Incomplete history of z8530drv:
60 -------------------------------
61
62 1994-09-13 started to write the driver, rescued most of my own
63 code (and Hans Alblas' memory buffer pool concept) from
64 an earlier project "sccdrv" which was initiated by
65 Guido ten Dolle. Not much of the old driver survived,
66 though. The first version I put my hands on was sccdrv1.3
67 from August 1993. The memory buffer pool concept
68 appeared in an unauthorized sccdrv version (1.5) from
69 August 1994.
70
71 1995-01-31 changed copyright notice to GPL without limitations.
72
73 .
74 . <SNIP>
75 .
76
77 1996-10-05 New semester, new driver...
78
79 * KISS TNC emulator removed (TTY driver)
80 * Source moved to drivers/net/
81 * Includes Z8530 defines from drivers/net/z8530.h
82 * Uses sk_buffer memory management
83 * Reduced overhead of /proc/net/z8530drv output
84 * Streamlined quite a lot things
85 * Invents brand new bugs... ;-)
86
87 The move to version number 3.0 reflects theses changes.
88 You can use 'kissbridge' if you need a KISS TNC emulator.
89
90 1996-12-13 Fixed for Linux networking changes. (G4KLX)
91 1997-01-08 Fixed the remaining problems.
92 1997-04-02 Hopefully fixed the problems with the new *_timer()
93 routines, added calibration code.
94 1997-10-12 Made SCC_DELAY a CONFIG option, added CONFIG_SCC_TRXECHO
95 1998-01-29 Small fix to avoid lock-up on initialization
96 1998-09-29 Fixed the "grouping" bugs, tx_inhibit works again,
97 using dev->tx_queue_len now instead of MAXQUEUE now.
98 1998-10-21 Postponed the spinlock changes, would need a lot of
99 testing I currently don't have the time to. Softdcd doesn't
100 work.
101 1998-11-04 Softdcd does not work correctly in DPLL mode, in fact it
102 never did. The DPLL locks on noise, the SYNC unit sees
103 flags that aren't... Restarting the DPLL does not help
104 either, it resynchronizes too slow and the first received
105 frame gets lost.
106 2000-02-13 Fixed for new network driver interface changes, still
107 does TX timeouts itself since it uses its own queue
108 scheme.
109
110 Thanks to all who contributed to this driver with ideas and bug
111 reports!
112
113 NB -- if you find errors, change something, please let me know
114 first before you distribute it... And please don't touch
115 the version number. Just replace my callsign in
116 "v3.0.dl1bke" with your own. Just to avoid confusion...
117
118 If you want to add your modification to the linux distribution
119 please (!) contact me first.
120
121 New versions of the driver will be announced on the linux-hams
122 mailing list on vger.kernel.org. To subscribe send an e-mail
123 to majordomo@vger.kernel.org with the following line in
124 the body of the mail:
125
126 subscribe linux-hams
127
128 The content of the "Subject" field will be ignored.
129
130 vy 73,
131 Joerg Reuter ampr-net: dl1bke@db0pra.ampr.org
132 AX-25 : DL1BKE @ DB0ABH.#BAY.DEU.EU
133 Internet: jreuter@yaina.de
134 www : http://yaina.de/jreuter
135*/
136
137/* ----------------------------------------------------------------------- */
138
139#undef SCC_LDELAY /* slow it even a bit more down */
140#undef SCC_DONT_CHECK /* don't look if the SCCs you specified are available */
141
142#define SCC_MAXCHIPS 4 /* number of max. supported chips */
143#define SCC_BUFSIZE 384 /* must not exceed 4096 */
144#undef SCC_DEBUG
145
146#define SCC_DEFAULT_CLOCK 4915200
147 /* default pclock if nothing is specified */
148
149/* ----------------------------------------------------------------------- */
150
Linus Torvalds1da177e2005-04-16 15:20:36 -0700151#include <linux/module.h>
152#include <linux/errno.h>
153#include <linux/signal.h>
154#include <linux/timer.h>
155#include <linux/interrupt.h>
156#include <linux/ioport.h>
157#include <linux/string.h>
158#include <linux/in.h>
159#include <linux/fcntl.h>
160#include <linux/ptrace.h>
161#include <linux/slab.h>
162#include <linux/delay.h>
163#include <linux/skbuff.h>
164#include <linux/netdevice.h>
165#include <linux/rtnetlink.h>
166#include <linux/if_ether.h>
167#include <linux/if_arp.h>
168#include <linux/socket.h>
169#include <linux/init.h>
170#include <linux/scc.h>
171#include <linux/ctype.h>
172#include <linux/kernel.h>
173#include <linux/proc_fs.h>
174#include <linux/seq_file.h>
175#include <linux/bitops.h>
176
Eric W. Biederman457c4cb2007-09-12 12:01:34 +0200177#include <net/net_namespace.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700178#include <net/ax25.h>
179
180#include <asm/irq.h>
181#include <asm/system.h>
182#include <asm/io.h>
183#include <asm/uaccess.h>
184
185#include "z8530.h"
186
Hannes Edereb33ae22009-02-14 11:33:21 +0000187static const char banner[] __initdata = KERN_INFO \
188 "AX.25: Z8530 SCC driver version "VERSION".dl1bke\n";
Linus Torvalds1da177e2005-04-16 15:20:36 -0700189
190static void t_dwait(unsigned long);
191static void t_txdelay(unsigned long);
192static void t_tail(unsigned long);
193static void t_busy(unsigned long);
194static void t_maxkeyup(unsigned long);
195static void t_idle(unsigned long);
196static void scc_tx_done(struct scc_channel *);
197static void scc_start_tx_timer(struct scc_channel *, void (*)(unsigned long), unsigned long);
198static void scc_start_maxkeyup(struct scc_channel *);
199static void scc_start_defer(struct scc_channel *);
200
201static void z8530_init(void);
202
203static void init_channel(struct scc_channel *scc);
204static void scc_key_trx (struct scc_channel *scc, char tx);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205static void scc_init_timer(struct scc_channel *scc);
206
207static int scc_net_alloc(const char *name, struct scc_channel *scc);
208static void scc_net_setup(struct net_device *dev);
209static int scc_net_open(struct net_device *dev);
210static int scc_net_close(struct net_device *dev);
211static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb);
212static int scc_net_tx(struct sk_buff *skb, struct net_device *dev);
213static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
214static int scc_net_set_mac_address(struct net_device *dev, void *addr);
215static struct net_device_stats * scc_net_get_stats(struct net_device *dev);
216
217static unsigned char SCC_DriverName[] = "scc";
218
219static struct irqflags { unsigned char used : 1; } Ivec[NR_IRQS];
220
221static struct scc_channel SCC_Info[2 * SCC_MAXCHIPS]; /* information per channel */
222
223static struct scc_ctrl {
224 io_port chan_A;
225 io_port chan_B;
226 int irq;
227} SCC_ctrl[SCC_MAXCHIPS+1];
228
229static unsigned char Driver_Initialized;
230static int Nchips;
231static io_port Vector_Latch;
232
233
234/* ******************************************************************** */
235/* * Port Access Functions * */
236/* ******************************************************************** */
237
238/* These provide interrupt save 2-step access to the Z8530 registers */
239
240static DEFINE_SPINLOCK(iolock); /* Guards paired accesses */
241
242static inline unsigned char InReg(io_port port, unsigned char reg)
243{
244 unsigned long flags;
245 unsigned char r;
246
247 spin_lock_irqsave(&iolock, flags);
248#ifdef SCC_LDELAY
249 Outb(port, reg);
250 udelay(SCC_LDELAY);
251 r=Inb(port);
252 udelay(SCC_LDELAY);
253#else
254 Outb(port, reg);
255 r=Inb(port);
256#endif
257 spin_unlock_irqrestore(&iolock, flags);
258 return r;
259}
260
261static inline void OutReg(io_port port, unsigned char reg, unsigned char val)
262{
263 unsigned long flags;
264
265 spin_lock_irqsave(&iolock, flags);
266#ifdef SCC_LDELAY
267 Outb(port, reg); udelay(SCC_LDELAY);
268 Outb(port, val); udelay(SCC_LDELAY);
269#else
270 Outb(port, reg);
271 Outb(port, val);
272#endif
273 spin_unlock_irqrestore(&iolock, flags);
274}
275
276static inline void wr(struct scc_channel *scc, unsigned char reg,
277 unsigned char val)
278{
279 OutReg(scc->ctrl, reg, (scc->wreg[reg] = val));
280}
281
282static inline void or(struct scc_channel *scc, unsigned char reg, unsigned char val)
283{
284 OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val));
285}
286
287static inline void cl(struct scc_channel *scc, unsigned char reg, unsigned char val)
288{
289 OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val));
290}
291
292/* ******************************************************************** */
293/* * Some useful macros * */
294/* ******************************************************************** */
295
296static inline void scc_discard_buffers(struct scc_channel *scc)
297{
298 unsigned long flags;
299
300 spin_lock_irqsave(&scc->lock, flags);
301 if (scc->tx_buff != NULL)
302 {
303 dev_kfree_skb(scc->tx_buff);
304 scc->tx_buff = NULL;
305 }
306
David S. Millerb03efcf2005-07-08 14:57:23 -0700307 while (!skb_queue_empty(&scc->tx_queue))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700308 dev_kfree_skb(skb_dequeue(&scc->tx_queue));
309
310 spin_unlock_irqrestore(&scc->lock, flags);
311}
312
313
314
315/* ******************************************************************** */
316/* * Interrupt Service Routines * */
317/* ******************************************************************** */
318
319
320/* ----> subroutines for the interrupt handlers <---- */
321
322static inline void scc_notify(struct scc_channel *scc, int event)
323{
324 struct sk_buff *skb;
325 char *bp;
326
327 if (scc->kiss.fulldup != KISS_DUPLEX_OPTIMA)
328 return;
329
330 skb = dev_alloc_skb(2);
331 if (skb != NULL)
332 {
333 bp = skb_put(skb, 2);
334 *bp++ = PARAM_HWEVENT;
335 *bp++ = event;
336 scc_net_rx(scc, skb);
337 } else
338 scc->stat.nospace++;
339}
340
341static inline void flush_rx_FIFO(struct scc_channel *scc)
342{
343 int k;
344
345 for (k=0; k<3; k++)
346 Inb(scc->data);
347
348 if(scc->rx_buff != NULL) /* did we receive something? */
349 {
350 scc->stat.rxerrs++; /* then count it as an error */
351 dev_kfree_skb_irq(scc->rx_buff);
352 scc->rx_buff = NULL;
353 }
354}
355
356static void start_hunt(struct scc_channel *scc)
357{
358 if ((scc->modem.clocksrc != CLK_EXTERNAL))
359 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */
360 or(scc,R3,ENT_HM|RxENABLE); /* enable the receiver, hunt mode */
361}
362
363/* ----> four different interrupt handlers for Tx, Rx, changing of */
364/* DCD/CTS and Rx/Tx errors */
365
366/* Transmitter interrupt handler */
367static inline void scc_txint(struct scc_channel *scc)
368{
369 struct sk_buff *skb;
370
371 scc->stat.txints++;
372 skb = scc->tx_buff;
373
374 /* send first octet */
375
376 if (skb == NULL)
377 {
378 skb = skb_dequeue(&scc->tx_queue);
379 scc->tx_buff = skb;
380 netif_wake_queue(scc->dev);
381
382 if (skb == NULL)
383 {
384 scc_tx_done(scc);
385 Outb(scc->ctrl, RES_Tx_P);
386 return;
387 }
388
389 if (skb->len == 0) /* Paranoia... */
390 {
391 dev_kfree_skb_irq(skb);
392 scc->tx_buff = NULL;
393 scc_tx_done(scc);
394 Outb(scc->ctrl, RES_Tx_P);
395 return;
396 }
397
398 scc->stat.tx_state = TXS_ACTIVE;
399
400 OutReg(scc->ctrl, R0, RES_Tx_CRC);
401 /* reset CRC generator */
402 or(scc,R10,ABUNDER); /* re-install underrun protection */
403 Outb(scc->data,*skb->data); /* send byte */
404 skb_pull(skb, 1);
405
406 if (!scc->enhanced) /* reset EOM latch */
407 Outb(scc->ctrl,RES_EOM_L);
408 return;
409 }
410
411 /* End Of Frame... */
412
413 if (skb->len == 0)
414 {
415 Outb(scc->ctrl, RES_Tx_P); /* reset pending int */
416 cl(scc, R10, ABUNDER); /* send CRC */
417 dev_kfree_skb_irq(skb);
418 scc->tx_buff = NULL;
419 scc->stat.tx_state = TXS_NEWFRAME; /* next frame... */
420 return;
421 }
422
423 /* send octet */
424
425 Outb(scc->data,*skb->data);
426 skb_pull(skb, 1);
427}
428
429
430/* External/Status interrupt handler */
431static inline void scc_exint(struct scc_channel *scc)
432{
433 unsigned char status,changes,chg_and_stat;
434
435 scc->stat.exints++;
436
437 status = InReg(scc->ctrl,R0);
438 changes = status ^ scc->status;
439 chg_and_stat = changes & status;
440
441 /* ABORT: generated whenever DCD drops while receiving */
442
443 if (chg_and_stat & BRK_ABRT) /* Received an ABORT */
444 flush_rx_FIFO(scc);
445
446 /* HUNT: software DCD; on = waiting for SYNC, off = receiving frame */
447
448 if ((changes & SYNC_HUNT) && scc->kiss.softdcd)
449 {
450 if (status & SYNC_HUNT)
451 {
452 scc->dcd = 0;
453 flush_rx_FIFO(scc);
454 if ((scc->modem.clocksrc != CLK_EXTERNAL))
455 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */
456 } else {
457 scc->dcd = 1;
458 }
459
460 scc_notify(scc, scc->dcd? HWEV_DCD_OFF:HWEV_DCD_ON);
461 }
462
463 /* DCD: on = start to receive packet, off = ABORT condition */
464 /* (a successfully received packet generates a special condition int) */
465
466 if((changes & DCD) && !scc->kiss.softdcd) /* DCD input changed state */
467 {
468 if(status & DCD) /* DCD is now ON */
469 {
470 start_hunt(scc);
471 scc->dcd = 1;
472 } else { /* DCD is now OFF */
473 cl(scc,R3,ENT_HM|RxENABLE); /* disable the receiver */
474 flush_rx_FIFO(scc);
475 scc->dcd = 0;
476 }
477
478 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF);
479 }
480
481#ifdef notdef
482 /* CTS: use external TxDelay (what's that good for?!)
483 * Anyway: If we _could_ use it (BayCom USCC uses CTS for
484 * own purposes) we _should_ use the "autoenable" feature
485 * of the Z8530 and not this interrupt...
486 */
487
488 if (chg_and_stat & CTS) /* CTS is now ON */
489 {
490 if (scc->kiss.txdelay == 0) /* zero TXDELAY = wait for CTS */
491 scc_start_tx_timer(scc, t_txdelay, 0);
492 }
493#endif
494
495 if (scc->stat.tx_state == TXS_ACTIVE && (status & TxEOM))
496 {
497 scc->stat.tx_under++; /* oops, an underrun! count 'em */
498 Outb(scc->ctrl, RES_EXT_INT); /* reset ext/status interrupts */
499
500 if (scc->tx_buff != NULL)
501 {
502 dev_kfree_skb_irq(scc->tx_buff);
503 scc->tx_buff = NULL;
504 }
505
506 or(scc,R10,ABUNDER);
507 scc_start_tx_timer(scc, t_txdelay, 0); /* restart transmission */
508 }
509
510 scc->status = status;
511 Outb(scc->ctrl,RES_EXT_INT);
512}
513
514
515/* Receiver interrupt handler */
516static inline void scc_rxint(struct scc_channel *scc)
517{
518 struct sk_buff *skb;
519
520 scc->stat.rxints++;
521
522 if((scc->wreg[5] & RTS) && scc->kiss.fulldup == KISS_DUPLEX_HALF)
523 {
524 Inb(scc->data); /* discard char */
525 or(scc,R3,ENT_HM); /* enter hunt mode for next flag */
526 return;
527 }
528
529 skb = scc->rx_buff;
530
531 if (skb == NULL)
532 {
533 skb = dev_alloc_skb(scc->stat.bufsize);
534 if (skb == NULL)
535 {
536 scc->dev_stat.rx_dropped++;
537 scc->stat.nospace++;
538 Inb(scc->data);
539 or(scc, R3, ENT_HM);
540 return;
541 }
542
543 scc->rx_buff = skb;
544 *(skb_put(skb, 1)) = 0; /* KISS data */
545 }
546
547 if (skb->len >= scc->stat.bufsize)
548 {
549#ifdef notdef
550 printk(KERN_DEBUG "z8530drv: oops, scc_rxint() received huge frame...\n");
551#endif
552 dev_kfree_skb_irq(skb);
553 scc->rx_buff = NULL;
554 Inb(scc->data);
555 or(scc, R3, ENT_HM);
556 return;
557 }
558
559 *(skb_put(skb, 1)) = Inb(scc->data);
560}
561
562
563/* Receive Special Condition interrupt handler */
564static inline void scc_spint(struct scc_channel *scc)
565{
566 unsigned char status;
567 struct sk_buff *skb;
568
569 scc->stat.spints++;
570
571 status = InReg(scc->ctrl,R1); /* read receiver status */
572
573 Inb(scc->data); /* throw away Rx byte */
574 skb = scc->rx_buff;
575
576 if(status & Rx_OVR) /* receiver overrun */
577 {
578 scc->stat.rx_over++; /* count them */
579 or(scc,R3,ENT_HM); /* enter hunt mode for next flag */
580
581 if (skb != NULL)
582 dev_kfree_skb_irq(skb);
583 scc->rx_buff = skb = NULL;
584 }
585
586 if(status & END_FR && skb != NULL) /* end of frame */
587 {
588 /* CRC okay, frame ends on 8 bit boundary and received something ? */
589
590 if (!(status & CRC_ERR) && (status & 0xe) == RES8 && skb->len > 0)
591 {
592 /* ignore last received byte (first of the CRC bytes) */
593 skb_trim(skb, skb->len-1);
594 scc_net_rx(scc, skb);
595 scc->rx_buff = NULL;
596 scc->stat.rxframes++;
597 } else { /* a bad frame */
598 dev_kfree_skb_irq(skb);
599 scc->rx_buff = NULL;
600 scc->stat.rxerrs++;
601 }
602 }
603
604 Outb(scc->ctrl,ERR_RES);
605}
606
607
608/* ----> interrupt service routine for the Z8530 <---- */
609
610static void scc_isr_dispatch(struct scc_channel *scc, int vector)
611{
612 spin_lock(&scc->lock);
613 switch (vector & VECTOR_MASK)
614 {
615 case TXINT: scc_txint(scc); break;
616 case EXINT: scc_exint(scc); break;
617 case RXINT: scc_rxint(scc); break;
618 case SPINT: scc_spint(scc); break;
619 }
620 spin_unlock(&scc->lock);
621}
622
623/* If the card has a latch for the interrupt vector (like the PA0HZP card)
624 use it to get the number of the chip that generated the int.
625 If not: poll all defined chips.
626 */
627
628#define SCC_IRQTIMEOUT 30000
629
David Howells7d12e782006-10-05 14:55:46 +0100630static irqreturn_t scc_isr(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700631{
Jeff Garzik1b36efe2007-10-29 05:20:44 -0400632 int chip_irq = (long) dev_id;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700633 unsigned char vector;
634 struct scc_channel *scc;
635 struct scc_ctrl *ctrl;
636 int k;
637
638 if (Vector_Latch)
639 {
640 for(k=0; k < SCC_IRQTIMEOUT; k++)
641 {
642 Outb(Vector_Latch, 0); /* Generate INTACK */
643
644 /* Read the vector */
645 if((vector=Inb(Vector_Latch)) >= 16 * Nchips) break;
646 if (vector & 0x01) break;
647
648 scc=&SCC_Info[vector >> 3 ^ 0x01];
649 if (!scc->dev) break;
650
651 scc_isr_dispatch(scc, vector);
652
653 OutReg(scc->ctrl,R0,RES_H_IUS); /* Reset Highest IUS */
654 }
655
656 if (k == SCC_IRQTIMEOUT)
657 printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?\n");
658
659 return IRQ_HANDLED;
660 }
661
662 /* Find the SCC generating the interrupt by polling all attached SCCs
663 * reading RR3A (the interrupt pending register)
664 */
665
666 ctrl = SCC_ctrl;
667 while (ctrl->chan_A)
668 {
Jeff Garzik1b36efe2007-10-29 05:20:44 -0400669 if (ctrl->irq != chip_irq)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700670 {
671 ctrl++;
672 continue;
673 }
674
675 scc = NULL;
676 for (k = 0; InReg(ctrl->chan_A,R3) && k < SCC_IRQTIMEOUT; k++)
677 {
678 vector=InReg(ctrl->chan_B,R2); /* Read the vector */
679 if (vector & 0x01) break;
680
681 scc = &SCC_Info[vector >> 3 ^ 0x01];
682 if (!scc->dev) break;
683
684 scc_isr_dispatch(scc, vector);
685 }
686
687 if (k == SCC_IRQTIMEOUT)
688 {
689 printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?!\n");
690 break;
691 }
692
693 /* This looks weird and it is. At least the BayCom USCC doesn't
694 * use the Interrupt Daisy Chain, thus we'll have to start
695 * all over again to be sure not to miss an interrupt from
696 * (any of) the other chip(s)...
697 * Honestly, the situation *is* braindamaged...
698 */
699
700 if (scc != NULL)
701 {
702 OutReg(scc->ctrl,R0,RES_H_IUS);
703 ctrl = SCC_ctrl;
704 } else
705 ctrl++;
706 }
707 return IRQ_HANDLED;
708}
709
710
711
712/* ******************************************************************** */
713/* * Init Channel */
714/* ******************************************************************** */
715
716
717/* ----> set SCC channel speed <---- */
718
719static inline void set_brg(struct scc_channel *scc, unsigned int tc)
720{
721 cl(scc,R14,BRENABL); /* disable baudrate generator */
722 wr(scc,R12,tc & 255); /* brg rate LOW */
723 wr(scc,R13,tc >> 8); /* brg rate HIGH */
724 or(scc,R14,BRENABL); /* enable baudrate generator */
725}
726
727static inline void set_speed(struct scc_channel *scc)
728{
729 unsigned long flags;
730 spin_lock_irqsave(&scc->lock, flags);
731
732 if (scc->modem.speed > 0) /* paranoia... */
733 set_brg(scc, (unsigned) (scc->clock / (scc->modem.speed * 64)) - 2);
734
735 spin_unlock_irqrestore(&scc->lock, flags);
736}
737
738
739/* ----> initialize a SCC channel <---- */
740
741static inline void init_brg(struct scc_channel *scc)
742{
743 wr(scc, R14, BRSRC); /* BRG source = PCLK */
744 OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]); /* DPLL source = BRG */
745 OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]); /* DPLL NRZI mode */
746}
747
748/*
749 * Initialization according to the Z8530 manual (SGS-Thomson's version):
750 *
751 * 1. Modes and constants
752 *
753 * WR9 11000000 chip reset
754 * WR4 XXXXXXXX Tx/Rx control, async or sync mode
755 * WR1 0XX00X00 select W/REQ (optional)
756 * WR2 XXXXXXXX program interrupt vector
757 * WR3 XXXXXXX0 select Rx control
758 * WR5 XXXX0XXX select Tx control
759 * WR6 XXXXXXXX sync character
760 * WR7 XXXXXXXX sync character
761 * WR9 000X0XXX select interrupt control
762 * WR10 XXXXXXXX miscellaneous control (optional)
763 * WR11 XXXXXXXX clock control
764 * WR12 XXXXXXXX time constant lower byte (optional)
765 * WR13 XXXXXXXX time constant upper byte (optional)
766 * WR14 XXXXXXX0 miscellaneous control
767 * WR14 XXXSSSSS commands (optional)
768 *
769 * 2. Enables
770 *
771 * WR14 000SSSS1 baud rate enable
772 * WR3 SSSSSSS1 Rx enable
773 * WR5 SSSS1SSS Tx enable
774 * WR0 10000000 reset Tx CRG (optional)
775 * WR1 XSS00S00 DMA enable (optional)
776 *
777 * 3. Interrupt status
778 *
779 * WR15 XXXXXXXX enable external/status
780 * WR0 00010000 reset external status
781 * WR0 00010000 reset external status twice
782 * WR1 SSSXXSXX enable Rx, Tx and Ext/status
783 * WR9 000SXSSS enable master interrupt enable
784 *
785 * 1 = set to one, 0 = reset to zero
786 * X = user defined, S = same as previous init
787 *
788 *
789 * Note that the implementation differs in some points from above scheme.
790 *
791 */
792
793static void init_channel(struct scc_channel *scc)
794{
795 del_timer(&scc->tx_t);
796 del_timer(&scc->tx_wdog);
797
798 disable_irq(scc->irq);
799
800 wr(scc,R4,X1CLK|SDLC); /* *1 clock, SDLC mode */
801 wr(scc,R1,0); /* no W/REQ operation */
802 wr(scc,R3,Rx8|RxCRC_ENAB); /* RX 8 bits/char, CRC, disabled */
803 wr(scc,R5,Tx8|DTR|TxCRC_ENAB); /* TX 8 bits/char, disabled, DTR */
804 wr(scc,R6,0); /* SDLC address zero (not used) */
805 wr(scc,R7,FLAG); /* SDLC flag value */
806 wr(scc,R9,VIS); /* vector includes status */
807 wr(scc,R10,(scc->modem.nrz? NRZ : NRZI)|CRCPS|ABUNDER); /* abort on underrun, preset CRC generator, NRZ(I) */
808 wr(scc,R14, 0);
809
810
811/* set clock sources:
812
813 CLK_DPLL: normal halfduplex operation
814
815 RxClk: use DPLL
816 TxClk: use DPLL
817 TRxC mode DPLL output
818
819 CLK_EXTERNAL: external clocking (G3RUH or DF9IC modem)
820
821 BayCom: others:
822
823 TxClk = pin RTxC TxClk = pin TRxC
824 RxClk = pin TRxC RxClk = pin RTxC
825
826
827 CLK_DIVIDER:
828 RxClk = use DPLL
829 TxClk = pin RTxC
830
831 BayCom: others:
832 pin TRxC = DPLL pin TRxC = BRG
833 (RxClk * 1) (RxClk * 32)
834*/
835
836
837 switch(scc->modem.clocksrc)
838 {
839 case CLK_DPLL:
840 wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP);
841 init_brg(scc);
842 break;
843
844 case CLK_DIVIDER:
845 wr(scc, R11, ((scc->brand & BAYCOM)? TRxCDP : TRxCBR) | RCDPLL|TCRTxCP|TRxCOI);
846 init_brg(scc);
847 break;
848
849 case CLK_EXTERNAL:
850 wr(scc, R11, (scc->brand & BAYCOM)? RCTRxCP|TCRTxCP : RCRTxCP|TCTRxCP);
851 OutReg(scc->ctrl, R14, DISDPLL);
852 break;
853
854 }
855
856 set_speed(scc); /* set baudrate */
857
858 if(scc->enhanced)
859 {
860 or(scc,R15,SHDLCE|FIFOE); /* enable FIFO, SDLC/HDLC Enhancements (From now R7 is R7') */
861 wr(scc,R7,AUTOEOM);
862 }
863
864 if(scc->kiss.softdcd || (InReg(scc->ctrl,R0) & DCD))
865 /* DCD is now ON */
866 {
867 start_hunt(scc);
868 }
869
870 /* enable ABORT, DCD & SYNC/HUNT interrupts */
871
872 wr(scc,R15, BRKIE|TxUIE|(scc->kiss.softdcd? SYNCIE:DCDIE));
873
874 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
875 Outb(scc->ctrl,RES_EXT_INT); /* must be done twice */
876
877 or(scc,R1,INT_ALL_Rx|TxINT_ENAB|EXT_INT_ENAB); /* enable interrupts */
878
879 scc->status = InReg(scc->ctrl,R0); /* read initial status */
880
881 or(scc,R9,MIE); /* master interrupt enable */
882
883 scc_init_timer(scc);
884
885 enable_irq(scc->irq);
886}
887
888
889
890
891/* ******************************************************************** */
892/* * SCC timer functions * */
893/* ******************************************************************** */
894
895
896/* ----> scc_key_trx sets the time constant for the baudrate
897 generator and keys the transmitter <---- */
898
899static void scc_key_trx(struct scc_channel *scc, char tx)
900{
901 unsigned int time_const;
902
903 if (scc->brand & PRIMUS)
904 Outb(scc->ctrl + 4, scc->option | (tx? 0x80 : 0));
905
906 if (scc->modem.speed < 300)
907 scc->modem.speed = 1200;
908
909 time_const = (unsigned) (scc->clock / (scc->modem.speed * (tx? 2:64))) - 2;
910
911 disable_irq(scc->irq);
912
913 if (tx)
914 {
915 or(scc, R1, TxINT_ENAB); /* t_maxkeyup may have reset these */
916 or(scc, R15, TxUIE);
917 }
918
919 if (scc->modem.clocksrc == CLK_DPLL)
920 { /* force simplex operation */
921 if (tx)
922 {
923#ifdef CONFIG_SCC_TRXECHO
924 cl(scc, R3, RxENABLE|ENT_HM); /* switch off receiver */
925 cl(scc, R15, DCDIE|SYNCIE); /* No DCD changes, please */
926#endif
927 set_brg(scc, time_const); /* reprogram baudrate generator */
928
929 /* DPLL -> Rx clk, BRG -> Tx CLK, TRxC mode output, TRxC = BRG */
930 wr(scc, R11, RCDPLL|TCBR|TRxCOI|TRxCBR);
931
932 /* By popular demand: tx_inhibit */
933 if (scc->kiss.tx_inhibit)
934 {
935 or(scc,R5, TxENAB);
936 scc->wreg[R5] |= RTS;
937 } else {
938 or(scc,R5,RTS|TxENAB); /* set the RTS line and enable TX */
939 }
940 } else {
941 cl(scc,R5,RTS|TxENAB);
942
943 set_brg(scc, time_const); /* reprogram baudrate generator */
944
945 /* DPLL -> Rx clk, DPLL -> Tx CLK, TRxC mode output, TRxC = DPLL */
946 wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP);
947
948#ifndef CONFIG_SCC_TRXECHO
949 if (scc->kiss.softdcd)
950#endif
951 {
952 or(scc,R15, scc->kiss.softdcd? SYNCIE:DCDIE);
953 start_hunt(scc);
954 }
955 }
956 } else {
957 if (tx)
958 {
959#ifdef CONFIG_SCC_TRXECHO
960 if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
961 {
962 cl(scc, R3, RxENABLE);
963 cl(scc, R15, DCDIE|SYNCIE);
964 }
965#endif
966
967 if (scc->kiss.tx_inhibit)
968 {
969 or(scc,R5, TxENAB);
970 scc->wreg[R5] |= RTS;
971 } else {
972 or(scc,R5,RTS|TxENAB); /* enable tx */
973 }
974 } else {
975 cl(scc,R5,RTS|TxENAB); /* disable tx */
976
977 if ((scc->kiss.fulldup == KISS_DUPLEX_HALF) &&
978#ifndef CONFIG_SCC_TRXECHO
979 scc->kiss.softdcd)
980#else
981 1)
982#endif
983 {
984 or(scc, R15, scc->kiss.softdcd? SYNCIE:DCDIE);
985 start_hunt(scc);
986 }
987 }
988 }
989
990 enable_irq(scc->irq);
991}
992
993
994/* ----> SCC timer interrupt handler and friends. <---- */
995
996static void __scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when)
997{
998 del_timer(&scc->tx_t);
999
1000 if (when == 0)
1001 {
1002 handler((unsigned long) scc);
1003 } else
1004 if (when != TIMER_OFF)
1005 {
1006 scc->tx_t.data = (unsigned long) scc;
1007 scc->tx_t.function = handler;
1008 scc->tx_t.expires = jiffies + (when*HZ)/100;
1009 add_timer(&scc->tx_t);
1010 }
1011}
1012
1013static void scc_start_tx_timer(struct scc_channel *scc, void (*handler)(unsigned long), unsigned long when)
1014{
1015 unsigned long flags;
1016
1017 spin_lock_irqsave(&scc->lock, flags);
1018 __scc_start_tx_timer(scc, handler, when);
1019 spin_unlock_irqrestore(&scc->lock, flags);
1020}
1021
1022static void scc_start_defer(struct scc_channel *scc)
1023{
1024 unsigned long flags;
1025
1026 spin_lock_irqsave(&scc->lock, flags);
1027 del_timer(&scc->tx_wdog);
1028
1029 if (scc->kiss.maxdefer != 0 && scc->kiss.maxdefer != TIMER_OFF)
1030 {
1031 scc->tx_wdog.data = (unsigned long) scc;
1032 scc->tx_wdog.function = t_busy;
1033 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxdefer;
1034 add_timer(&scc->tx_wdog);
1035 }
1036 spin_unlock_irqrestore(&scc->lock, flags);
1037}
1038
1039static void scc_start_maxkeyup(struct scc_channel *scc)
1040{
1041 unsigned long flags;
1042
1043 spin_lock_irqsave(&scc->lock, flags);
1044 del_timer(&scc->tx_wdog);
1045
1046 if (scc->kiss.maxkeyup != 0 && scc->kiss.maxkeyup != TIMER_OFF)
1047 {
1048 scc->tx_wdog.data = (unsigned long) scc;
1049 scc->tx_wdog.function = t_maxkeyup;
1050 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxkeyup;
1051 add_timer(&scc->tx_wdog);
1052 }
1053 spin_unlock_irqrestore(&scc->lock, flags);
1054}
1055
1056/*
1057 * This is called from scc_txint() when there are no more frames to send.
1058 * Not exactly a timer function, but it is a close friend of the family...
1059 */
1060
1061static void scc_tx_done(struct scc_channel *scc)
1062{
1063 /*
1064 * trx remains keyed in fulldup mode 2 until t_idle expires.
1065 */
1066
1067 switch (scc->kiss.fulldup)
1068 {
1069 case KISS_DUPLEX_LINK:
1070 scc->stat.tx_state = TXS_IDLE2;
1071 if (scc->kiss.idletime != TIMER_OFF)
1072 scc_start_tx_timer(scc, t_idle, scc->kiss.idletime*100);
1073 break;
1074 case KISS_DUPLEX_OPTIMA:
1075 scc_notify(scc, HWEV_ALL_SENT);
1076 break;
1077 default:
1078 scc->stat.tx_state = TXS_BUSY;
1079 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
1080 }
1081
1082 netif_wake_queue(scc->dev);
1083}
1084
1085
1086static unsigned char Rand = 17;
1087
1088static inline int is_grouped(struct scc_channel *scc)
1089{
1090 int k;
1091 struct scc_channel *scc2;
1092 unsigned char grp1, grp2;
1093
1094 grp1 = scc->kiss.group;
1095
1096 for (k = 0; k < (Nchips * 2); k++)
1097 {
1098 scc2 = &SCC_Info[k];
1099 grp2 = scc2->kiss.group;
1100
1101 if (scc2 == scc || !(scc2->dev && grp2))
1102 continue;
1103
1104 if ((grp1 & 0x3f) == (grp2 & 0x3f))
1105 {
1106 if ( (grp1 & TXGROUP) && (scc2->wreg[R5] & RTS) )
1107 return 1;
1108
1109 if ( (grp1 & RXGROUP) && scc2->dcd )
1110 return 1;
1111 }
1112 }
1113 return 0;
1114}
1115
1116/* DWAIT and SLOTTIME expired
1117 *
1118 * fulldup == 0: DCD is active or Rand > P-persistence: start t_busy timer
1119 * else key trx and start txdelay
1120 * fulldup == 1: key trx and start txdelay
1121 * fulldup == 2: mintime expired, reset status or key trx and start txdelay
1122 */
1123
1124static void t_dwait(unsigned long channel)
1125{
1126 struct scc_channel *scc = (struct scc_channel *) channel;
1127
1128 if (scc->stat.tx_state == TXS_WAIT) /* maxkeyup or idle timeout */
1129 {
David S. Millerb03efcf2005-07-08 14:57:23 -07001130 if (skb_queue_empty(&scc->tx_queue)) { /* nothing to send */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001131 scc->stat.tx_state = TXS_IDLE;
1132 netif_wake_queue(scc->dev); /* t_maxkeyup locked it. */
1133 return;
1134 }
1135
1136 scc->stat.tx_state = TXS_BUSY;
1137 }
1138
1139 if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
1140 {
1141 Rand = Rand * 17 + 31;
1142
1143 if (scc->dcd || (scc->kiss.persist) < Rand || (scc->kiss.group && is_grouped(scc)) )
1144 {
1145 scc_start_defer(scc);
1146 scc_start_tx_timer(scc, t_dwait, scc->kiss.slottime);
1147 return ;
1148 }
1149 }
1150
1151 if ( !(scc->wreg[R5] & RTS) )
1152 {
1153 scc_key_trx(scc, TX_ON);
1154 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
1155 } else {
1156 scc_start_tx_timer(scc, t_txdelay, 0);
1157 }
1158}
1159
1160
1161/* TXDELAY expired
1162 *
1163 * kick transmission by a fake scc_txint(scc), start 'maxkeyup' watchdog.
1164 */
1165
1166static void t_txdelay(unsigned long channel)
1167{
1168 struct scc_channel *scc = (struct scc_channel *) channel;
1169
1170 scc_start_maxkeyup(scc);
1171
1172 if (scc->tx_buff == NULL)
1173 {
1174 disable_irq(scc->irq);
1175 scc_txint(scc);
1176 enable_irq(scc->irq);
1177 }
1178}
1179
1180
1181/* TAILTIME expired
1182 *
1183 * switch off transmitter. If we were stopped by Maxkeyup restart
1184 * transmission after 'mintime' seconds
1185 */
1186
1187static void t_tail(unsigned long channel)
1188{
1189 struct scc_channel *scc = (struct scc_channel *) channel;
1190 unsigned long flags;
1191
1192 spin_lock_irqsave(&scc->lock, flags);
1193 del_timer(&scc->tx_wdog);
1194 scc_key_trx(scc, TX_OFF);
1195 spin_unlock_irqrestore(&scc->lock, flags);
1196
1197 if (scc->stat.tx_state == TXS_TIMEOUT) /* we had a timeout? */
1198 {
1199 scc->stat.tx_state = TXS_WAIT;
1200 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100);
1201 return;
1202 }
1203
1204 scc->stat.tx_state = TXS_IDLE;
1205 netif_wake_queue(scc->dev);
1206}
1207
1208
1209/* BUSY timeout
1210 *
1211 * throw away send buffers if DCD remains active too long.
1212 */
1213
1214static void t_busy(unsigned long channel)
1215{
1216 struct scc_channel *scc = (struct scc_channel *) channel;
1217
1218 del_timer(&scc->tx_t);
1219 netif_stop_queue(scc->dev); /* don't pile on the wabbit! */
1220
1221 scc_discard_buffers(scc);
1222 scc->stat.txerrs++;
1223 scc->stat.tx_state = TXS_IDLE;
1224
1225 netif_wake_queue(scc->dev);
1226}
1227
1228/* MAXKEYUP timeout
1229 *
1230 * this is our watchdog.
1231 */
1232
1233static void t_maxkeyup(unsigned long channel)
1234{
1235 struct scc_channel *scc = (struct scc_channel *) channel;
1236 unsigned long flags;
1237
1238 spin_lock_irqsave(&scc->lock, flags);
1239 /*
1240 * let things settle down before we start to
1241 * accept new data.
1242 */
1243
1244 netif_stop_queue(scc->dev);
1245 scc_discard_buffers(scc);
1246
1247 del_timer(&scc->tx_t);
1248
1249 cl(scc, R1, TxINT_ENAB); /* force an ABORT, but don't */
1250 cl(scc, R15, TxUIE); /* count it. */
1251 OutReg(scc->ctrl, R0, RES_Tx_P);
1252
1253 spin_unlock_irqrestore(&scc->lock, flags);
1254
1255 scc->stat.txerrs++;
1256 scc->stat.tx_state = TXS_TIMEOUT;
1257 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
1258}
1259
1260/* IDLE timeout
1261 *
1262 * in fulldup mode 2 it keys down the transmitter after 'idle' seconds
1263 * of inactivity. We will not restart transmission before 'mintime'
1264 * expires.
1265 */
1266
1267static void t_idle(unsigned long channel)
1268{
1269 struct scc_channel *scc = (struct scc_channel *) channel;
1270
1271 del_timer(&scc->tx_wdog);
1272
1273 scc_key_trx(scc, TX_OFF);
1274 if(scc->kiss.mintime)
1275 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100);
1276 scc->stat.tx_state = TXS_WAIT;
1277}
1278
1279static void scc_init_timer(struct scc_channel *scc)
1280{
1281 unsigned long flags;
1282
1283 spin_lock_irqsave(&scc->lock, flags);
1284 scc->stat.tx_state = TXS_IDLE;
1285 spin_unlock_irqrestore(&scc->lock, flags);
1286}
1287
1288
1289/* ******************************************************************** */
1290/* * Set/get L1 parameters * */
1291/* ******************************************************************** */
1292
1293
1294/*
1295 * this will set the "hardware" parameters through KISS commands or ioctl()
1296 */
1297
1298#define CAST(x) (unsigned long)(x)
1299
1300static unsigned int scc_set_param(struct scc_channel *scc, unsigned int cmd, unsigned int arg)
1301{
1302 switch (cmd)
1303 {
1304 case PARAM_TXDELAY: scc->kiss.txdelay=arg; break;
1305 case PARAM_PERSIST: scc->kiss.persist=arg; break;
1306 case PARAM_SLOTTIME: scc->kiss.slottime=arg; break;
1307 case PARAM_TXTAIL: scc->kiss.tailtime=arg; break;
1308 case PARAM_FULLDUP: scc->kiss.fulldup=arg; break;
1309 case PARAM_DTR: break; /* does someone need this? */
1310 case PARAM_GROUP: scc->kiss.group=arg; break;
1311 case PARAM_IDLE: scc->kiss.idletime=arg; break;
1312 case PARAM_MIN: scc->kiss.mintime=arg; break;
1313 case PARAM_MAXKEY: scc->kiss.maxkeyup=arg; break;
1314 case PARAM_WAIT: scc->kiss.waittime=arg; break;
1315 case PARAM_MAXDEFER: scc->kiss.maxdefer=arg; break;
1316 case PARAM_TX: scc->kiss.tx_inhibit=arg; break;
1317
1318 case PARAM_SOFTDCD:
1319 scc->kiss.softdcd=arg;
1320 if (arg)
1321 {
1322 or(scc, R15, SYNCIE);
1323 cl(scc, R15, DCDIE);
1324 start_hunt(scc);
1325 } else {
1326 or(scc, R15, DCDIE);
1327 cl(scc, R15, SYNCIE);
1328 }
1329 break;
1330
1331 case PARAM_SPEED:
1332 if (arg < 256)
1333 scc->modem.speed=arg*100;
1334 else
1335 scc->modem.speed=arg;
1336
1337 if (scc->stat.tx_state == 0) /* only switch baudrate on rx... ;-) */
1338 set_speed(scc);
1339 break;
1340
1341 case PARAM_RTS:
1342 if ( !(scc->wreg[R5] & RTS) )
1343 {
Ilpo Järvinen69417272008-05-13 14:16:53 +03001344 if (arg != TX_OFF) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001345 scc_key_trx(scc, TX_ON);
1346 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
Ilpo Järvinen69417272008-05-13 14:16:53 +03001347 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001348 } else {
1349 if (arg == TX_OFF)
1350 {
1351 scc->stat.tx_state = TXS_BUSY;
1352 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime);
1353 }
1354 }
1355 break;
1356
1357 case PARAM_HWEVENT:
1358 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF);
1359 break;
1360
1361 default: return -EINVAL;
1362 }
1363
1364 return 0;
1365}
1366
1367
1368
1369static unsigned long scc_get_param(struct scc_channel *scc, unsigned int cmd)
1370{
1371 switch (cmd)
1372 {
1373 case PARAM_TXDELAY: return CAST(scc->kiss.txdelay);
1374 case PARAM_PERSIST: return CAST(scc->kiss.persist);
1375 case PARAM_SLOTTIME: return CAST(scc->kiss.slottime);
1376 case PARAM_TXTAIL: return CAST(scc->kiss.tailtime);
1377 case PARAM_FULLDUP: return CAST(scc->kiss.fulldup);
1378 case PARAM_SOFTDCD: return CAST(scc->kiss.softdcd);
1379 case PARAM_DTR: return CAST((scc->wreg[R5] & DTR)? 1:0);
1380 case PARAM_RTS: return CAST((scc->wreg[R5] & RTS)? 1:0);
1381 case PARAM_SPEED: return CAST(scc->modem.speed);
1382 case PARAM_GROUP: return CAST(scc->kiss.group);
1383 case PARAM_IDLE: return CAST(scc->kiss.idletime);
1384 case PARAM_MIN: return CAST(scc->kiss.mintime);
1385 case PARAM_MAXKEY: return CAST(scc->kiss.maxkeyup);
1386 case PARAM_WAIT: return CAST(scc->kiss.waittime);
1387 case PARAM_MAXDEFER: return CAST(scc->kiss.maxdefer);
1388 case PARAM_TX: return CAST(scc->kiss.tx_inhibit);
1389 default: return NO_SUCH_PARAM;
1390 }
1391
1392}
1393
1394#undef CAST
1395
1396/* ******************************************************************* */
1397/* * Send calibration pattern * */
1398/* ******************************************************************* */
1399
1400static void scc_stop_calibrate(unsigned long channel)
1401{
1402 struct scc_channel *scc = (struct scc_channel *) channel;
1403 unsigned long flags;
1404
1405 spin_lock_irqsave(&scc->lock, flags);
1406 del_timer(&scc->tx_wdog);
1407 scc_key_trx(scc, TX_OFF);
1408 wr(scc, R6, 0);
1409 wr(scc, R7, FLAG);
1410 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
1411 Outb(scc->ctrl,RES_EXT_INT);
1412
1413 netif_wake_queue(scc->dev);
1414 spin_unlock_irqrestore(&scc->lock, flags);
1415}
1416
1417
1418static void
1419scc_start_calibrate(struct scc_channel *scc, int duration, unsigned char pattern)
1420{
1421 unsigned long flags;
1422
1423 spin_lock_irqsave(&scc->lock, flags);
1424 netif_stop_queue(scc->dev);
1425 scc_discard_buffers(scc);
1426
1427 del_timer(&scc->tx_wdog);
1428
1429 scc->tx_wdog.data = (unsigned long) scc;
1430 scc->tx_wdog.function = scc_stop_calibrate;
1431 scc->tx_wdog.expires = jiffies + HZ*duration;
1432 add_timer(&scc->tx_wdog);
1433
1434 /* This doesn't seem to work. Why not? */
1435 wr(scc, R6, 0);
1436 wr(scc, R7, pattern);
1437
1438 /*
1439 * Don't know if this works.
1440 * Damn, where is my Z8530 programming manual...?
1441 */
1442
1443 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */
1444 Outb(scc->ctrl,RES_EXT_INT);
1445
1446 scc_key_trx(scc, TX_ON);
1447 spin_unlock_irqrestore(&scc->lock, flags);
1448}
1449
1450/* ******************************************************************* */
1451/* * Init channel structures, special HW, etc... * */
1452/* ******************************************************************* */
1453
1454/*
1455 * Reset the Z8530s and setup special hardware
1456 */
1457
1458static void z8530_init(void)
1459{
1460 struct scc_channel *scc;
1461 int chip, k;
1462 unsigned long flags;
1463 char *flag;
1464
1465
1466 printk(KERN_INFO "Init Z8530 driver: %u channels, IRQ", Nchips*2);
1467
1468 flag=" ";
Yinghai Lu60e4ad72008-08-19 20:49:50 -07001469 for (k = 0; k < nr_irqs; k++)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001470 if (Ivec[k].used)
1471 {
1472 printk("%s%d", flag, k);
1473 flag=",";
1474 }
1475 printk("\n");
1476
1477
1478 /* reset and pre-init all chips in the system */
1479 for (chip = 0; chip < Nchips; chip++)
1480 {
1481 scc=&SCC_Info[2*chip];
1482 if (!scc->ctrl) continue;
1483
1484 /* Special SCC cards */
1485
1486 if(scc->brand & EAGLE) /* this is an EAGLE card */
1487 Outb(scc->special,0x08); /* enable interrupt on the board */
1488
1489 if(scc->brand & (PC100 | PRIMUS)) /* this is a PC100/PRIMUS card */
1490 Outb(scc->special,scc->option); /* set the MODEM mode (0x22) */
1491
1492
1493 /* Reset and pre-init Z8530 */
1494
1495 spin_lock_irqsave(&scc->lock, flags);
1496
1497 Outb(scc->ctrl, 0);
1498 OutReg(scc->ctrl,R9,FHWRES); /* force hardware reset */
1499 udelay(100); /* give it 'a bit' more time than required */
1500 wr(scc, R2, chip*16); /* interrupt vector */
1501 wr(scc, R9, VIS); /* vector includes status */
1502 spin_unlock_irqrestore(&scc->lock, flags);
1503 }
1504
1505
1506 Driver_Initialized = 1;
1507}
1508
1509/*
1510 * Allocate device structure, err, instance, and register driver
1511 */
1512
1513static int scc_net_alloc(const char *name, struct scc_channel *scc)
1514{
1515 int err;
1516 struct net_device *dev;
1517
1518 dev = alloc_netdev(0, name, scc_net_setup);
1519 if (!dev)
1520 return -ENOMEM;
1521
Wang Chenf4bdd262008-11-20 01:02:05 -08001522 dev->ml_priv = scc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001523 scc->dev = dev;
1524 spin_lock_init(&scc->lock);
1525 init_timer(&scc->tx_t);
1526 init_timer(&scc->tx_wdog);
1527
1528 err = register_netdevice(dev);
1529 if (err) {
1530 printk(KERN_ERR "%s: can't register network device (%d)\n",
1531 name, err);
1532 free_netdev(dev);
1533 scc->dev = NULL;
1534 return err;
1535 }
1536
1537 return 0;
1538}
1539
1540
1541
1542/* ******************************************************************** */
1543/* * Network driver methods * */
1544/* ******************************************************************** */
1545
Stephen Hemmingerff908cf2009-01-09 13:01:39 +00001546static const struct net_device_ops scc_netdev_ops = {
1547 .ndo_open = scc_net_open,
1548 .ndo_stop = scc_net_close,
1549 .ndo_start_xmit = scc_net_tx,
1550 .ndo_set_mac_address = scc_net_set_mac_address,
1551 .ndo_get_stats = scc_net_get_stats,
1552 .ndo_do_ioctl = scc_net_ioctl,
1553};
1554
Linus Torvalds1da177e2005-04-16 15:20:36 -07001555/* ----> Initialize device <----- */
1556
1557static void scc_net_setup(struct net_device *dev)
1558{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001559 dev->tx_queue_len = 16; /* should be enough... */
1560
Stephen Hemmingerff908cf2009-01-09 13:01:39 +00001561 dev->netdev_ops = &scc_netdev_ops;
Stephen Hemminger3b04ddd2007-10-09 01:40:57 -07001562 dev->header_ops = &ax25_header_ops;
1563
Ralf Baechle15b1c0e2006-12-07 15:47:08 -08001564 memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
1565 memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001566
1567 dev->flags = 0;
1568
1569 dev->type = ARPHRD_AX25;
1570 dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
1571 dev->mtu = AX25_DEF_PACLEN;
1572 dev->addr_len = AX25_ADDR_LEN;
1573
1574}
1575
1576/* ----> open network device <---- */
1577
1578static int scc_net_open(struct net_device *dev)
1579{
Wang Chenf4bdd262008-11-20 01:02:05 -08001580 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001581
1582 if (!scc->init)
1583 return -EINVAL;
1584
1585 scc->tx_buff = NULL;
1586 skb_queue_head_init(&scc->tx_queue);
1587
1588 init_channel(scc);
1589
1590 netif_start_queue(dev);
1591 return 0;
1592}
1593
1594/* ----> close network device <---- */
1595
1596static int scc_net_close(struct net_device *dev)
1597{
Wang Chenf4bdd262008-11-20 01:02:05 -08001598 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001599 unsigned long flags;
1600
1601 netif_stop_queue(dev);
1602
1603 spin_lock_irqsave(&scc->lock, flags);
1604 Outb(scc->ctrl,0); /* Make sure pointer is written */
1605 wr(scc,R1,0); /* disable interrupts */
1606 wr(scc,R3,0);
1607 spin_unlock_irqrestore(&scc->lock, flags);
1608
1609 del_timer_sync(&scc->tx_t);
1610 del_timer_sync(&scc->tx_wdog);
1611
1612 scc_discard_buffers(scc);
1613
1614 return 0;
1615}
1616
1617/* ----> receive frame, called from scc_rxint() <---- */
1618
1619static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb)
1620{
1621 if (skb->len == 0) {
1622 dev_kfree_skb_irq(skb);
1623 return;
1624 }
1625
1626 scc->dev_stat.rx_packets++;
1627 scc->dev_stat.rx_bytes += skb->len;
1628
Arnaldo Carvalho de Melo56cb5152005-04-24 18:53:06 -07001629 skb->protocol = ax25_type_trans(skb, scc->dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001630
1631 netif_rx(skb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001632 return;
1633}
1634
1635/* ----> transmit frame <---- */
1636
1637static int scc_net_tx(struct sk_buff *skb, struct net_device *dev)
1638{
Wang Chenf4bdd262008-11-20 01:02:05 -08001639 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001640 unsigned long flags;
1641 char kisscmd;
1642
1643 if (skb->len > scc->stat.bufsize || skb->len < 2) {
1644 scc->dev_stat.tx_dropped++; /* bogus frame */
1645 dev_kfree_skb(skb);
1646 return 0;
1647 }
1648
1649 scc->dev_stat.tx_packets++;
1650 scc->dev_stat.tx_bytes += skb->len;
1651 scc->stat.txframes++;
1652
1653 kisscmd = *skb->data & 0x1f;
1654 skb_pull(skb, 1);
1655
1656 if (kisscmd) {
1657 scc_set_param(scc, kisscmd, *skb->data);
1658 dev_kfree_skb(skb);
1659 return 0;
1660 }
1661
1662 spin_lock_irqsave(&scc->lock, flags);
1663
1664 if (skb_queue_len(&scc->tx_queue) > scc->dev->tx_queue_len) {
1665 struct sk_buff *skb_del;
1666 skb_del = skb_dequeue(&scc->tx_queue);
1667 dev_kfree_skb(skb_del);
1668 }
1669 skb_queue_tail(&scc->tx_queue, skb);
1670 dev->trans_start = jiffies;
1671
1672
1673 /*
1674 * Start transmission if the trx state is idle or
1675 * t_idle hasn't expired yet. Use dwait/persistence/slottime
1676 * algorithm for normal halfduplex operation.
1677 */
1678
1679 if(scc->stat.tx_state == TXS_IDLE || scc->stat.tx_state == TXS_IDLE2) {
1680 scc->stat.tx_state = TXS_BUSY;
1681 if (scc->kiss.fulldup == KISS_DUPLEX_HALF)
1682 __scc_start_tx_timer(scc, t_dwait, scc->kiss.waittime);
1683 else
1684 __scc_start_tx_timer(scc, t_dwait, 0);
1685 }
1686 spin_unlock_irqrestore(&scc->lock, flags);
1687 return 0;
1688}
1689
1690/* ----> ioctl functions <---- */
1691
1692/*
1693 * SIOCSCCCFG - configure driver arg: (struct scc_hw_config *) arg
1694 * SIOCSCCINI - initialize driver arg: ---
1695 * SIOCSCCCHANINI - initialize channel arg: (struct scc_modem *) arg
1696 * SIOCSCCSMEM - set memory arg: (struct scc_mem_config *) arg
1697 * SIOCSCCGKISS - get level 1 parameter arg: (struct scc_kiss_cmd *) arg
1698 * SIOCSCCSKISS - set level 1 parameter arg: (struct scc_kiss_cmd *) arg
1699 * SIOCSCCGSTAT - get driver status arg: (struct scc_stat *) arg
1700 * SIOCSCCCAL - send calib. pattern arg: (struct scc_calibrate *) arg
1701 */
1702
1703static int scc_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1704{
1705 struct scc_kiss_cmd kiss_cmd;
1706 struct scc_mem_config memcfg;
1707 struct scc_hw_config hwcfg;
1708 struct scc_calibrate cal;
Wang Chenf4bdd262008-11-20 01:02:05 -08001709 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001710 int chan;
1711 unsigned char device_name[IFNAMSIZ];
1712 void __user *arg = ifr->ifr_data;
1713
1714
1715 if (!Driver_Initialized)
1716 {
1717 if (cmd == SIOCSCCCFG)
1718 {
1719 int found = 1;
1720
1721 if (!capable(CAP_SYS_RAWIO)) return -EPERM;
1722 if (!arg) return -EFAULT;
1723
1724 if (Nchips >= SCC_MAXCHIPS)
1725 return -EINVAL;
1726
1727 if (copy_from_user(&hwcfg, arg, sizeof(hwcfg)))
1728 return -EFAULT;
1729
1730 if (hwcfg.irq == 2) hwcfg.irq = 9;
1731
Yinghai Lu60e4ad72008-08-19 20:49:50 -07001732 if (hwcfg.irq < 0 || hwcfg.irq >= nr_irqs)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001733 return -EINVAL;
1734
1735 if (!Ivec[hwcfg.irq].used && hwcfg.irq)
1736 {
Jeff Garzik1b36efe2007-10-29 05:20:44 -04001737 if (request_irq(hwcfg.irq, scc_isr,
1738 IRQF_DISABLED, "AX.25 SCC",
1739 (void *)(long) hwcfg.irq))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001740 printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq);
1741 else
1742 Ivec[hwcfg.irq].used = 1;
1743 }
1744
1745 if (hwcfg.vector_latch && !Vector_Latch) {
1746 if (!request_region(hwcfg.vector_latch, 1, "scc vector latch"))
1747 printk(KERN_WARNING "z8530drv: warning, cannot reserve vector latch port 0x%lx\n, disabled.", hwcfg.vector_latch);
1748 else
1749 Vector_Latch = hwcfg.vector_latch;
1750 }
1751
1752 if (hwcfg.clock == 0)
1753 hwcfg.clock = SCC_DEFAULT_CLOCK;
1754
1755#ifndef SCC_DONT_CHECK
1756
1757 if(request_region(hwcfg.ctrl_a, 1, "scc-probe"))
1758 {
1759 disable_irq(hwcfg.irq);
1760 Outb(hwcfg.ctrl_a, 0);
1761 OutReg(hwcfg.ctrl_a, R9, FHWRES);
1762 udelay(100);
1763 OutReg(hwcfg.ctrl_a,R13,0x55); /* is this chip really there? */
1764 udelay(5);
1765
1766 if (InReg(hwcfg.ctrl_a,R13) != 0x55)
1767 found = 0;
1768 enable_irq(hwcfg.irq);
1769 release_region(hwcfg.ctrl_a, 1);
1770 }
1771 else
1772 found = 0;
1773#endif
1774
1775 if (found)
1776 {
1777 SCC_Info[2*Nchips ].ctrl = hwcfg.ctrl_a;
1778 SCC_Info[2*Nchips ].data = hwcfg.data_a;
1779 SCC_Info[2*Nchips ].irq = hwcfg.irq;
1780 SCC_Info[2*Nchips+1].ctrl = hwcfg.ctrl_b;
1781 SCC_Info[2*Nchips+1].data = hwcfg.data_b;
1782 SCC_Info[2*Nchips+1].irq = hwcfg.irq;
1783
1784 SCC_ctrl[Nchips].chan_A = hwcfg.ctrl_a;
1785 SCC_ctrl[Nchips].chan_B = hwcfg.ctrl_b;
1786 SCC_ctrl[Nchips].irq = hwcfg.irq;
1787 }
1788
1789
1790 for (chan = 0; chan < 2; chan++)
1791 {
1792 sprintf(device_name, "%s%i", SCC_DriverName, 2*Nchips+chan);
1793
1794 SCC_Info[2*Nchips+chan].special = hwcfg.special;
1795 SCC_Info[2*Nchips+chan].clock = hwcfg.clock;
1796 SCC_Info[2*Nchips+chan].brand = hwcfg.brand;
1797 SCC_Info[2*Nchips+chan].option = hwcfg.option;
1798 SCC_Info[2*Nchips+chan].enhanced = hwcfg.escc;
1799
1800#ifdef SCC_DONT_CHECK
1801 printk(KERN_INFO "%s: data port = 0x%3.3x control port = 0x%3.3x\n",
1802 device_name,
1803 SCC_Info[2*Nchips+chan].data,
1804 SCC_Info[2*Nchips+chan].ctrl);
1805
1806#else
1807 printk(KERN_INFO "%s: data port = 0x%3.3lx control port = 0x%3.3lx -- %s\n",
1808 device_name,
1809 chan? hwcfg.data_b : hwcfg.data_a,
1810 chan? hwcfg.ctrl_b : hwcfg.ctrl_a,
1811 found? "found" : "missing");
1812#endif
1813
1814 if (found)
1815 {
1816 request_region(SCC_Info[2*Nchips+chan].ctrl, 1, "scc ctrl");
1817 request_region(SCC_Info[2*Nchips+chan].data, 1, "scc data");
1818 if (Nchips+chan != 0 &&
1819 scc_net_alloc(device_name,
1820 &SCC_Info[2*Nchips+chan]))
1821 return -EINVAL;
1822 }
1823 }
1824
1825 if (found) Nchips++;
1826
1827 return 0;
1828 }
1829
1830 if (cmd == SIOCSCCINI)
1831 {
1832 if (!capable(CAP_SYS_RAWIO))
1833 return -EPERM;
1834
1835 if (Nchips == 0)
1836 return -EINVAL;
1837
1838 z8530_init();
1839 return 0;
1840 }
1841
1842 return -EINVAL; /* confuse the user */
1843 }
1844
1845 if (!scc->init)
1846 {
1847 if (cmd == SIOCSCCCHANINI)
1848 {
1849 if (!capable(CAP_NET_ADMIN)) return -EPERM;
1850 if (!arg) return -EINVAL;
1851
1852 scc->stat.bufsize = SCC_BUFSIZE;
1853
1854 if (copy_from_user(&scc->modem, arg, sizeof(struct scc_modem)))
1855 return -EINVAL;
1856
1857 /* default KISS Params */
1858
1859 if (scc->modem.speed < 4800)
1860 {
1861 scc->kiss.txdelay = 36; /* 360 ms */
1862 scc->kiss.persist = 42; /* 25% persistence */ /* was 25 */
1863 scc->kiss.slottime = 16; /* 160 ms */
1864 scc->kiss.tailtime = 4; /* minimal reasonable value */
1865 scc->kiss.fulldup = 0; /* CSMA */
1866 scc->kiss.waittime = 50; /* 500 ms */
1867 scc->kiss.maxkeyup = 10; /* 10 s */
1868 scc->kiss.mintime = 3; /* 3 s */
1869 scc->kiss.idletime = 30; /* 30 s */
1870 scc->kiss.maxdefer = 120; /* 2 min */
1871 scc->kiss.softdcd = 0; /* hardware dcd */
1872 } else {
1873 scc->kiss.txdelay = 10; /* 100 ms */
1874 scc->kiss.persist = 64; /* 25% persistence */ /* was 25 */
1875 scc->kiss.slottime = 8; /* 160 ms */
1876 scc->kiss.tailtime = 1; /* minimal reasonable value */
1877 scc->kiss.fulldup = 0; /* CSMA */
1878 scc->kiss.waittime = 50; /* 500 ms */
1879 scc->kiss.maxkeyup = 7; /* 7 s */
1880 scc->kiss.mintime = 3; /* 3 s */
1881 scc->kiss.idletime = 30; /* 30 s */
1882 scc->kiss.maxdefer = 120; /* 2 min */
1883 scc->kiss.softdcd = 0; /* hardware dcd */
1884 }
1885
1886 scc->tx_buff = NULL;
1887 skb_queue_head_init(&scc->tx_queue);
1888 scc->init = 1;
1889
1890 return 0;
1891 }
1892
1893 return -EINVAL;
1894 }
1895
1896 switch(cmd)
1897 {
1898 case SIOCSCCRESERVED:
1899 return -ENOIOCTLCMD;
1900
1901 case SIOCSCCSMEM:
1902 if (!capable(CAP_SYS_RAWIO)) return -EPERM;
1903 if (!arg || copy_from_user(&memcfg, arg, sizeof(memcfg)))
1904 return -EINVAL;
1905 scc->stat.bufsize = memcfg.bufsize;
1906 return 0;
1907
1908 case SIOCSCCGSTAT:
1909 if (!arg || copy_to_user(arg, &scc->stat, sizeof(scc->stat)))
1910 return -EINVAL;
1911 return 0;
1912
1913 case SIOCSCCGKISS:
1914 if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd)))
1915 return -EINVAL;
1916 kiss_cmd.param = scc_get_param(scc, kiss_cmd.command);
1917 if (copy_to_user(arg, &kiss_cmd, sizeof(kiss_cmd)))
1918 return -EINVAL;
1919 return 0;
1920
1921 case SIOCSCCSKISS:
1922 if (!capable(CAP_NET_ADMIN)) return -EPERM;
1923 if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd)))
1924 return -EINVAL;
1925 return scc_set_param(scc, kiss_cmd.command, kiss_cmd.param);
1926
1927 case SIOCSCCCAL:
1928 if (!capable(CAP_SYS_RAWIO)) return -EPERM;
1929 if (!arg || copy_from_user(&cal, arg, sizeof(cal)) || cal.time == 0)
1930 return -EINVAL;
1931
1932 scc_start_calibrate(scc, cal.time, cal.pattern);
1933 return 0;
1934
1935 default:
1936 return -ENOIOCTLCMD;
1937
1938 }
1939
1940 return -EINVAL;
1941}
1942
1943/* ----> set interface callsign <---- */
1944
1945static int scc_net_set_mac_address(struct net_device *dev, void *addr)
1946{
1947 struct sockaddr *sa = (struct sockaddr *) addr;
1948 memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
1949 return 0;
1950}
1951
1952/* ----> get statistics <---- */
1953
1954static struct net_device_stats *scc_net_get_stats(struct net_device *dev)
1955{
Wang Chenf4bdd262008-11-20 01:02:05 -08001956 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001957
1958 scc->dev_stat.rx_errors = scc->stat.rxerrs + scc->stat.rx_over;
1959 scc->dev_stat.tx_errors = scc->stat.txerrs + scc->stat.tx_under;
1960 scc->dev_stat.rx_fifo_errors = scc->stat.rx_over;
1961 scc->dev_stat.tx_fifo_errors = scc->stat.tx_under;
1962
1963 return &scc->dev_stat;
1964}
1965
1966/* ******************************************************************** */
1967/* * dump statistics to /proc/net/z8530drv * */
1968/* ******************************************************************** */
1969
1970#ifdef CONFIG_PROC_FS
1971
1972static inline struct scc_channel *scc_net_seq_idx(loff_t pos)
1973{
1974 int k;
1975
1976 for (k = 0; k < Nchips*2; ++k) {
1977 if (!SCC_Info[k].init)
1978 continue;
1979 if (pos-- == 0)
1980 return &SCC_Info[k];
1981 }
1982 return NULL;
1983}
1984
1985static void *scc_net_seq_start(struct seq_file *seq, loff_t *pos)
1986{
1987 return *pos ? scc_net_seq_idx(*pos - 1) : SEQ_START_TOKEN;
1988
1989}
1990
1991static void *scc_net_seq_next(struct seq_file *seq, void *v, loff_t *pos)
1992{
1993 unsigned k;
1994 struct scc_channel *scc = v;
1995 ++*pos;
1996
1997 for (k = (v == SEQ_START_TOKEN) ? 0 : (scc - SCC_Info)+1;
1998 k < Nchips*2; ++k) {
1999 if (SCC_Info[k].init)
2000 return &SCC_Info[k];
2001 }
2002 return NULL;
2003}
2004
2005static void scc_net_seq_stop(struct seq_file *seq, void *v)
2006{
2007}
2008
2009static int scc_net_seq_show(struct seq_file *seq, void *v)
2010{
2011 if (v == SEQ_START_TOKEN) {
2012 seq_puts(seq, "z8530drv-"VERSION"\n");
2013 } else if (!Driver_Initialized) {
2014 seq_puts(seq, "not initialized\n");
2015 } else if (!Nchips) {
2016 seq_puts(seq, "chips missing\n");
2017 } else {
2018 const struct scc_channel *scc = v;
2019 const struct scc_stat *stat = &scc->stat;
2020 const struct scc_kiss *kiss = &scc->kiss;
2021
2022
2023 /* dev data ctrl irq clock brand enh vector special option
2024 * baud nrz clocksrc softdcd bufsize
2025 * rxints txints exints spints
2026 * rcvd rxerrs over / xmit txerrs under / nospace bufsize
2027 * txd pers slot tail ful wait min maxk idl defr txof grp
2028 * W ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
2029 * R ## ## XX ## ## ## ## ## XX ## ## ## ## ## ## ##
2030 */
2031
2032 seq_printf(seq, "%s\t%3.3lx %3.3lx %d %lu %2.2x %d %3.3lx %3.3lx %d\n",
2033 scc->dev->name,
2034 scc->data, scc->ctrl, scc->irq, scc->clock, scc->brand,
2035 scc->enhanced, Vector_Latch, scc->special,
2036 scc->option);
2037 seq_printf(seq, "\t%lu %d %d %d %d\n",
2038 scc->modem.speed, scc->modem.nrz,
2039 scc->modem.clocksrc, kiss->softdcd,
2040 stat->bufsize);
2041 seq_printf(seq, "\t%lu %lu %lu %lu\n",
2042 stat->rxints, stat->txints, stat->exints, stat->spints);
2043 seq_printf(seq, "\t%lu %lu %d / %lu %lu %d / %d %d\n",
2044 stat->rxframes, stat->rxerrs, stat->rx_over,
2045 stat->txframes, stat->txerrs, stat->tx_under,
2046 stat->nospace, stat->tx_state);
2047
2048#define K(x) kiss->x
2049 seq_printf(seq, "\t%d %d %d %d %d %d %d %d %d %d %d %d\n",
2050 K(txdelay), K(persist), K(slottime), K(tailtime),
2051 K(fulldup), K(waittime), K(mintime), K(maxkeyup),
2052 K(idletime), K(maxdefer), K(tx_inhibit), K(group));
2053#undef K
2054#ifdef SCC_DEBUG
2055 {
2056 int reg;
2057
2058 seq_printf(seq, "\tW ");
2059 for (reg = 0; reg < 16; reg++)
2060 seq_printf(seq, "%2.2x ", scc->wreg[reg]);
2061 seq_printf(seq, "\n");
2062
2063 seq_printf(seq, "\tR %2.2x %2.2x XX ", InReg(scc->ctrl,R0), InReg(scc->ctrl,R1));
2064 for (reg = 3; reg < 8; reg++)
2065 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg));
2066 seq_printf(seq, "XX ");
2067 for (reg = 9; reg < 16; reg++)
2068 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg));
2069 seq_printf(seq, "\n");
2070 }
2071#endif
2072 seq_putc(seq, '\n');
2073 }
2074
2075 return 0;
2076}
2077
Jan Engelhardt4101dec2009-01-14 13:52:18 -08002078static const struct seq_operations scc_net_seq_ops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002079 .start = scc_net_seq_start,
2080 .next = scc_net_seq_next,
2081 .stop = scc_net_seq_stop,
2082 .show = scc_net_seq_show,
2083};
2084
2085
2086static int scc_net_seq_open(struct inode *inode, struct file *file)
2087{
2088 return seq_open(file, &scc_net_seq_ops);
2089}
2090
Arjan van de Vend54b1fd2007-02-12 00:55:34 -08002091static const struct file_operations scc_net_seq_fops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002092 .owner = THIS_MODULE,
2093 .open = scc_net_seq_open,
2094 .read = seq_read,
2095 .llseek = seq_lseek,
2096 .release = seq_release_private,
2097};
2098
2099#endif /* CONFIG_PROC_FS */
2100
2101
2102/* ******************************************************************** */
2103/* * Init SCC driver * */
2104/* ******************************************************************** */
2105
2106static int __init scc_init_driver (void)
2107{
2108 char devname[IFNAMSIZ];
2109
2110 printk(banner);
2111
2112 sprintf(devname,"%s0", SCC_DriverName);
2113
2114 rtnl_lock();
2115 if (scc_net_alloc(devname, SCC_Info)) {
2116 rtnl_unlock();
2117 printk(KERN_ERR "z8530drv: cannot initialize module\n");
2118 return -EIO;
2119 }
2120 rtnl_unlock();
2121
Eric W. Biederman457c4cb2007-09-12 12:01:34 +02002122 proc_net_fops_create(&init_net, "z8530drv", 0, &scc_net_seq_fops);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002123
2124 return 0;
2125}
2126
2127static void __exit scc_cleanup_driver(void)
2128{
2129 io_port ctrl;
2130 int k;
2131 struct scc_channel *scc;
2132 struct net_device *dev;
2133
2134 if (Nchips == 0 && (dev = SCC_Info[0].dev))
2135 {
2136 unregister_netdev(dev);
2137 free_netdev(dev);
2138 }
2139
2140 /* Guard against chip prattle */
2141 local_irq_disable();
2142
2143 for (k = 0; k < Nchips; k++)
2144 if ( (ctrl = SCC_ctrl[k].chan_A) )
2145 {
2146 Outb(ctrl, 0);
2147 OutReg(ctrl,R9,FHWRES); /* force hardware reset */
2148 udelay(50);
2149 }
2150
2151 /* To unload the port must be closed so no real IRQ pending */
Yinghai Lu60e4ad72008-08-19 20:49:50 -07002152 for (k = 0; k < nr_irqs ; k++)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002153 if (Ivec[k].used) free_irq(k, NULL);
2154
2155 local_irq_enable();
2156
2157 /* Now clean up */
2158 for (k = 0; k < Nchips*2; k++)
2159 {
2160 scc = &SCC_Info[k];
2161 if (scc->ctrl)
2162 {
2163 release_region(scc->ctrl, 1);
2164 release_region(scc->data, 1);
2165 }
2166 if (scc->dev)
2167 {
2168 unregister_netdev(scc->dev);
2169 free_netdev(scc->dev);
2170 }
2171 }
2172
2173
2174 if (Vector_Latch)
2175 release_region(Vector_Latch, 1);
2176
Eric W. Biederman457c4cb2007-09-12 12:01:34 +02002177 proc_net_remove(&init_net, "z8530drv");
Linus Torvalds1da177e2005-04-16 15:20:36 -07002178}
2179
2180MODULE_AUTHOR("Joerg Reuter <jreuter@yaina.de>");
2181MODULE_DESCRIPTION("AX.25 Device Driver for Z8530 based HDLC cards");
2182MODULE_SUPPORTED_DEVICE("Z8530 based SCC cards for Amateur Radio");
2183MODULE_LICENSE("GPL");
2184module_init(scc_init_driver);
2185module_exit(scc_cleanup_driver);