blob: 4cff9a7e61d2d70b8af645e11bc38df30bfdd72a [file] [log] [blame]
Andrew Victorca0a7892008-05-24 17:47:04 +01001/*
2 * linux/arch/arm/mach-at91/board-qil-a9260.c
3 *
4 * Copyright (C) 2005 SAN People
5 * Copyright (C) 2006 Atmel
6 * Copyright (C) 2007 Calao-systems
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 */
22
23#include <linux/types.h>
24#include <linux/init.h>
25#include <linux/mm.h>
26#include <linux/module.h>
27#include <linux/platform_device.h>
28#include <linux/spi/spi.h>
29#include <linux/gpio_keys.h>
30#include <linux/input.h>
31#include <linux/clk.h>
32
Andrew Victorca0a7892008-05-24 17:47:04 +010033#include <asm/setup.h>
34#include <asm/mach-types.h>
35#include <asm/irq.h>
36
37#include <asm/mach/arch.h>
38#include <asm/mach/map.h>
39#include <asm/mach/irq.h>
40
Andrew Victore5052402008-09-21 21:30:02 +010041#include <mach/hardware.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010042#include <mach/board.h>
43#include <mach/gpio.h>
Andrew Victor8cdae512008-10-06 20:05:35 +010044#include <mach/at91sam9_smc.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010045#include <mach/at91_shdwc.h>
Andrew Victorca0a7892008-05-24 17:47:04 +010046
Andrew Victor8cdae512008-10-06 20:05:35 +010047#include "sam9_smc.h"
Andrew Victorca0a7892008-05-24 17:47:04 +010048#include "generic.h"
49
50
51static void __init ek_map_io(void)
52{
53 /* Initialize processor: 12.000 MHz crystal */
54 at91sam9260_initialize(12000000);
55
56 /* DGBU on ttyS0. (Rx & Tx only) */
57 at91_register_uart(0, 0, 0);
58
59 /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
60 at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
61 | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
62 | ATMEL_UART_RI);
63
64 /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
65 at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
66
67 /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
68 at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
69
70 /* set serial console to ttyS1 (ie, USART0) */
71 at91_set_serial_console(1);
72
73}
74
75static void __init ek_init_irq(void)
76{
77 at91sam9260_init_interrupts(NULL);
78}
79
80
81/*
82 * USB Host port
83 */
84static struct at91_usbh_data __initdata ek_usbh_data = {
85 .ports = 2,
86};
87
88/*
89 * USB Device port
90 */
91static struct at91_udc_data __initdata ek_udc_data = {
92 .vbus_pin = AT91_PIN_PC5,
93 .pullup_pin = 0, /* pull-up driven by UDC */
94};
95
96/*
97 * SPI devices.
98 */
99static struct spi_board_info ek_spi_devices[] = {
100#if defined(CONFIG_RTC_DRV_M41T94)
101 { /* M41T94 RTC */
102 .modalias = "m41t94",
103 .chip_select = 0,
104 .max_speed_hz = 1 * 1000 * 1000,
105 .bus_num = 0,
106 }
107#endif
108};
109
110/*
111 * MACB Ethernet device
112 */
113static struct at91_eth_data __initdata ek_macb_data = {
114 .phy_irq_pin = AT91_PIN_PA31,
115 .is_rmii = 1,
116};
117
118/*
119 * NAND flash
120 */
121static struct mtd_partition __initdata ek_nand_partition[] = {
122 {
123 .name = "Uboot & Kernel",
Andrew Victore5052402008-09-21 21:30:02 +0100124 .offset = 0,
125 .size = SZ_16M,
Andrew Victorca0a7892008-05-24 17:47:04 +0100126 },
127 {
128 .name = "Root FS",
Andrew Victore5052402008-09-21 21:30:02 +0100129 .offset = MTDPART_OFS_NXTBLK,
130 .size = 120 * SZ_1M,
Andrew Victorca0a7892008-05-24 17:47:04 +0100131 },
132 {
133 .name = "FS",
Andrew Victore5052402008-09-21 21:30:02 +0100134 .offset = MTDPART_OFS_NXTBLK,
135 .size = 120 * SZ_1M,
Andrew Victorca0a7892008-05-24 17:47:04 +0100136 },
137};
138
139static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
140{
141 *num_partitions = ARRAY_SIZE(ek_nand_partition);
142 return ek_nand_partition;
143}
144
Haavard Skinnemoen7c896832008-07-28 16:57:22 +0100145static struct atmel_nand_data __initdata ek_nand_data = {
Andrew Victorca0a7892008-05-24 17:47:04 +0100146 .ale = 21,
147 .cle = 22,
148// .det_pin = ... not connected
149 .rdy_pin = AT91_PIN_PC13,
150 .enable_pin = AT91_PIN_PC14,
151 .partition_info = nand_partitions,
Andrew Victorca0a7892008-05-24 17:47:04 +0100152};
153
Andrew Victor8cdae512008-10-06 20:05:35 +0100154static struct sam9_smc_config __initdata ek_nand_smc_config = {
155 .ncs_read_setup = 0,
156 .nrd_setup = 1,
157 .ncs_write_setup = 0,
158 .nwe_setup = 1,
159
160 .ncs_read_pulse = 3,
161 .nrd_pulse = 3,
162 .ncs_write_pulse = 3,
163 .nwe_pulse = 3,
164
165 .read_cycle = 5,
166 .write_cycle = 5,
167
168 .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
169 .tdf_cycles = 2,
170};
171
172static void __init ek_add_device_nand(void)
173{
174 /* configure chip-select 3 (NAND) */
175 sam9_smc_configure(3, &ek_nand_smc_config);
176
177 at91_add_device_nand(&ek_nand_data);
178}
179
Andrew Victorca0a7892008-05-24 17:47:04 +0100180/*
181 * MCI (SD/MMC)
182 */
183static struct at91_mmc_data __initdata ek_mmc_data = {
184 .slot_b = 0,
185 .wire4 = 1,
186// .det_pin = ... not connected
187// .wp_pin = ... not connected
188// .vcc_pin = ... not connected
189};
190
191/*
192 * GPIO Buttons
193 */
194#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
195static struct gpio_keys_button ek_buttons[] = {
196 { /* USER PUSH BUTTON */
197 .code = KEY_ENTER,
198 .gpio = AT91_PIN_PB10,
199 .active_low = 1,
200 .desc = "user_pb",
201 .wakeup = 1,
202 }
203};
204
205static struct gpio_keys_platform_data ek_button_data = {
206 .buttons = ek_buttons,
207 .nbuttons = ARRAY_SIZE(ek_buttons),
208};
209
210static struct platform_device ek_button_device = {
211 .name = "gpio-keys",
212 .id = -1,
213 .num_resources = 0,
214 .dev = {
215 .platform_data = &ek_button_data,
216 }
217};
218
219static void __init ek_add_device_buttons(void)
220{
221 at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
222 at91_set_deglitch(AT91_PIN_PB10, 1);
223
224 platform_device_register(&ek_button_device);
225}
226#else
227static void __init ek_add_device_buttons(void) {}
228#endif
229
230/*
231 * LEDs
232 */
233static struct gpio_led ek_leds[] = {
234 { /* user_led (green) */
235 .name = "user_led",
236 .gpio = AT91_PIN_PB21,
237 .active_low = 0,
238 .default_trigger = "heartbeat",
239 }
240};
241
242static void __init ek_board_init(void)
243{
244 /* Serial */
245 at91_add_device_serial();
246 /* USB Host */
247 at91_add_device_usbh(&ek_usbh_data);
248 /* USB Device */
249 at91_add_device_udc(&ek_udc_data);
250 /* SPI */
251 at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
252 /* NAND */
Andrew Victor8cdae512008-10-06 20:05:35 +0100253 ek_add_device_nand();
Andrew Victorca0a7892008-05-24 17:47:04 +0100254 /* I2C */
255 at91_add_device_i2c(NULL, 0);
256 /* Ethernet */
257 at91_add_device_eth(&ek_macb_data);
258 /* MMC */
259 at91_add_device_mmc(0, &ek_mmc_data);
260 /* Push Buttons */
261 ek_add_device_buttons();
262 /* LEDs */
263 at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
264 /* shutdown controller, wakeup button (5 msec low) */
265 at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
266 | AT91_SHDW_RTTWKEN);
267}
268
269MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
270 /* Maintainer: calao-systems */
271 .phys_io = AT91_BASE_SYS,
272 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
273 .boot_params = AT91_SDRAM_BASE + 0x100,
274 .timer = &at91sam926x_timer,
275 .map_io = ek_map_io,
276 .init_irq = ek_init_irq,
277 .init_machine = ek_board_init,
278MACHINE_END