blob: acddddac7ee46fb961e8ba1fe86d038276d0a632 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001menu "Kernel hacking"
2
3source "lib/Kconfig.debug"
4
Nicolas Pitre087aaff2010-09-22 18:34:36 -04005config STRICT_DEVMEM
6 bool "Filter access to /dev/mem"
7 depends on MMU
8 ---help---
9 If this option is disabled, you allow userspace (root) access to all
10 of memory, including kernel and userspace memory. Accidental
11 access to this is obviously disastrous, but specific access can
12 be used by people debugging the kernel.
13
14 If this option is switched on, the /dev/mem file only allows
15 userspace access to memory mapped peripherals.
16
17 If in doubt, say Y.
18
Catalin Marinasadf8b372009-02-12 13:56:34 +010019# RMK wants arm kernels compiled with frame pointers or stack unwinding.
Linus Torvalds1da177e2005-04-16 15:20:36 -070020# If you know what you are doing and are willing to live without stack
21# traces, you can get a slightly smaller kernel by setting this option to
22# n, but then RMK will have to kill you ;).
23config FRAME_POINTER
24 bool
Catalin Marinas16c79652009-07-24 12:33:02 +010025 depends on !THUMB2_KERNEL
Rabin Vincent0e341af2010-11-06 23:03:53 +053026 default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
Linus Torvalds1da177e2005-04-16 15:20:36 -070027 help
28 If you say N here, the resulting kernel will be slightly smaller and
Catalin Marinasadf8b372009-02-12 13:56:34 +010029 faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
30 when a problem occurs with the kernel, the information that is
31 reported is severely limited.
32
33config ARM_UNWIND
Russell King4a50bfe2010-12-05 23:06:22 +000034 bool "Enable stack unwinding support (EXPERIMENTAL)"
Kees Cookd6f94fa2013-01-16 18:53:14 -080035 depends on AEABI
Catalin Marinasadf8b372009-02-12 13:56:34 +010036 default y
37 help
38 This option enables stack unwinding support in the kernel
39 using the information automatically generated by the
40 compiler. The resulting kernel image is slightly bigger but
41 the performance is not affected. Currently, this feature
42 only works with EABI compilers. If unsure say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -070043
Rabin Vincent09bfafa2010-08-10 19:32:37 +010044config OLD_MCOUNT
45 bool
46 depends on FUNCTION_TRACER && FRAME_POINTER
47 default y
48
Linus Torvalds1da177e2005-04-16 15:20:36 -070049config DEBUG_USER
50 bool "Verbose user fault messages"
51 help
52 When a user program crashes due to an exception, the kernel can
53 print a brief message explaining what the problem was. This is
54 sometimes helpful for debugging but serves no purpose on a
55 production system. Most people should say N here.
56
57 In addition, you need to pass user_debug=N on the kernel command
58 line to enable this feature. N consists of the sum of:
59
60 1 - undefined instruction events
61 2 - system calls
62 4 - invalid data aborts
63 8 - SIGSEGV faults
64 16 - SIGBUS faults
65
Linus Torvalds1da177e2005-04-16 15:20:36 -070066# These options are only for real kernel hackers who want to get their hands dirty.
67config DEBUG_LL
Will Deacon4f5ef922011-09-01 19:04:44 +010068 bool "Kernel low-level debugging functions (read help!)"
Linus Torvalds1da177e2005-04-16 15:20:36 -070069 depends on DEBUG_KERNEL
70 help
Russell King35efb602005-09-09 15:57:17 +010071 Say Y here to include definitions of printascii, printch, printhex
Linus Torvalds1da177e2005-04-16 15:20:36 -070072 in the kernel. This is helpful if you are debugging code that
73 executes before the console is initialized.
74
Will Deacon4f5ef922011-09-01 19:04:44 +010075 Note that selecting this option will limit the kernel to a single
76 UART definition, as specified below. Attempting to boot the kernel
77 image on a different platform *will not work*, so this option should
78 not be enabled for kernels that are intended to be portable.
79
Will Deacon17916b22011-09-01 18:58:51 +010080choice
81 prompt "Kernel low-level debugging port"
82 depends on DEBUG_LL
83
Jean-Christophe PLAGNIOL-VILLARD13079a72011-11-02 01:43:31 +080084 config AT91_DEBUG_LL_DBGU0
85 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
86 depends on HAVE_AT91_DBGU0
87
88 config AT91_DEBUG_LL_DBGU1
Jean-Christophe PLAGNIOL-VILLARD9918cea2012-01-26 14:07:09 +010089 bool "Kernel low-level debugging on 9263 and 9g45"
Jean-Christophe PLAGNIOL-VILLARD13079a72011-11-02 01:43:31 +080090 depends on HAVE_AT91_DBGU1
91
Stephen Boyd164acf92011-09-22 20:28:35 +010092 config DEBUG_CLPS711X_UART1
93 bool "Kernel low-level debugging messages via UART1"
94 depends on ARCH_CLPS711X
95 help
96 Say Y here if you want the debug print routines to direct
97 their output to the first serial port on these devices.
Will Deacon17916b22011-09-01 18:58:51 +010098
99 config DEBUG_CLPS711X_UART2
100 bool "Kernel low-level debugging messages via UART2"
101 depends on ARCH_CLPS711X
102 help
103 Say Y here if you want the debug print routines to direct
104 their output to the second serial port on these devices.
Will Deacon17916b22011-09-01 18:58:51 +0100105
Uwe Kleine-König477099f2012-03-22 10:29:23 +0100106 config DEBUG_DAVINCI_DA8XX_UART1
107 bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
108 depends on ARCH_DAVINCI_DA8XX
109 help
110 Say Y here if you want the debug print routines to direct
111 their output to UART1 serial port on DaVinci DA8XX devices.
112
113 config DEBUG_DAVINCI_DA8XX_UART2
114 bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
115 depends on ARCH_DAVINCI_DA8XX
116 help
117 Say Y here if you want the debug print routines to direct
118 their output to UART2 serial port on DaVinci DA8XX devices.
119
120 config DEBUG_DAVINCI_DMx_UART0
121 bool "Kernel low-level debugging on DaVinci DMx using UART0"
122 depends on ARCH_DAVINCI_DMx
123 help
124 Say Y here if you want the debug print routines to direct
125 their output to UART0 serial port on DaVinci DMx devices.
126
127 config DEBUG_DAVINCI_TNETV107X_UART1
128 bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
129 depends on ARCH_DAVINCI_TNETV107X
130 help
131 Say Y here if you want the debug print routines to direct
132 their output to UART1 serial port on DaVinci TNETV107X
133 devices.
134
Nick Bowleraaf5e0b2012-11-05 16:45:49 -0500135 config DEBUG_ZYNQ_UART0
136 bool "Kernel low-level debugging on Xilinx Zynq using UART0"
137 depends on ARCH_ZYNQ
138 help
139 Say Y here if you want the debug print routines to direct
140 their output to UART0 on the Zynq platform.
141
142 config DEBUG_ZYNQ_UART1
143 bool "Kernel low-level debugging on Xilinx Zynq using UART1"
144 depends on ARCH_ZYNQ
145 help
146 Say Y here if you want the debug print routines to direct
147 their output to UART1 on the Zynq platform.
148
149 If you have a ZC702 board and want early boot messages to
150 appear on the USB serial adaptor, select this option.
151
Russell Kinge76f4752011-11-23 17:44:05 +0000152 config DEBUG_DC21285_PORT
153 bool "Kernel low-level debugging messages via footbridge serial port"
154 depends on FOOTBRIDGE
155 help
156 Say Y here if you want the debug print routines to direct
157 their output to the serial port in the DC21285 (Footbridge).
158
159 config DEBUG_FOOTBRIDGE_COM1
160 bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
161 depends on FOOTBRIDGE
162 help
163 Say Y here if you want the debug print routines to direct
164 their output to the 8250 at PCI COM1.
165
Rob Herring220e6cf2011-06-07 10:02:55 -0500166 config DEBUG_HIGHBANK_UART
167 bool "Kernel low-level debugging messages via Highbank UART"
168 depends on ARCH_HIGHBANK
169 help
170 Say Y here if you want the debug print routines to direct
171 their output to the UART on Highbank based devices.
172
Shawn Guof350b862011-08-19 05:56:59 +0100173 config DEBUG_IMX1_UART
174 bool "i.MX1 Debug UART"
175 depends on SOC_IMX1
176 help
177 Say Y here if you want kernel low-level debugging support
178 on i.MX1.
179
180 config DEBUG_IMX23_UART
181 bool "i.MX23 Debug UART"
182 depends on SOC_IMX23
183 help
184 Say Y here if you want kernel low-level debugging support
185 on i.MX23.
186
187 config DEBUG_IMX25_UART
188 bool "i.MX25 Debug UART"
189 depends on SOC_IMX25
190 help
191 Say Y here if you want kernel low-level debugging support
192 on i.MX25.
193
194 config DEBUG_IMX21_IMX27_UART
195 bool "i.MX21 and i.MX27 Debug UART"
196 depends on SOC_IMX21 || SOC_IMX27
197 help
198 Say Y here if you want kernel low-level debugging support
199 on i.MX21 or i.MX27.
200
201 config DEBUG_IMX28_UART
202 bool "i.MX28 Debug UART"
203 depends on SOC_IMX28
204 help
205 Say Y here if you want kernel low-level debugging support
206 on i.MX28.
207
Shawn Guo4ad625d2012-12-12 18:54:01 +0800208 config DEBUG_IMX31_UART
209 bool "i.MX31 Debug UART"
210 depends on SOC_IMX31
Shawn Guof350b862011-08-19 05:56:59 +0100211 help
212 Say Y here if you want kernel low-level debugging support
Shawn Guo4ad625d2012-12-12 18:54:01 +0800213 on i.MX31.
214
215 config DEBUG_IMX35_UART
216 bool "i.MX35 Debug UART"
217 depends on SOC_IMX35
218 help
219 Say Y here if you want kernel low-level debugging support
220 on i.MX35.
Shawn Guof350b862011-08-19 05:56:59 +0100221
222 config DEBUG_IMX51_UART
223 bool "i.MX51 Debug UART"
224 depends on SOC_IMX51
225 help
226 Say Y here if you want kernel low-level debugging support
227 on i.MX51.
228
Fabio Estevam7356420c2013-01-22 10:40:55 -0200229 config DEBUG_IMX53_UART
230 bool "i.MX53 Debug UART"
231 depends on SOC_IMX53
Shawn Guof350b862011-08-19 05:56:59 +0100232 help
233 Say Y here if you want kernel low-level debugging support
Fabio Estevam7356420c2013-01-22 10:40:55 -0200234 on i.MX53.
Shawn Guof350b862011-08-19 05:56:59 +0100235
Shawn Guo49c9e602012-10-08 13:44:29 +0800236 config DEBUG_IMX6Q_UART
237 bool "i.MX6Q Debug UART"
Dirk Behme785d7fa2012-04-27 10:15:45 +0200238 depends on SOC_IMX6Q
239 help
240 Say Y here if you want kernel low-level debugging support
Shawn Guo49c9e602012-10-08 13:44:29 +0800241 on i.MX6Q.
Shawn Guobac89d72011-10-02 15:09:11 +0800242
Haojian Zhuangfa4cd2a2012-08-10 23:49:41 +0800243 config DEBUG_MMP_UART2
244 bool "Kernel low-level debugging message via MMP UART2"
245 depends on ARCH_MMP
246 help
247 Say Y here if you want kernel low-level debugging support
248 on MMP UART2.
249
250 config DEBUG_MMP_UART3
251 bool "Kernel low-level debugging message via MMP UART3"
252 depends on ARCH_MMP
253 help
254 Say Y here if you want kernel low-level debugging support
255 on MMP UART3.
256
Stephen Boyd650e3f02011-11-08 10:33:03 -0800257 config DEBUG_MSM_UART1
258 bool "Kernel low-level debugging messages via MSM UART1"
259 depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
260 help
261 Say Y here if you want the debug print routines to direct
262 their output to the first serial port on MSM devices.
263
264 config DEBUG_MSM_UART2
265 bool "Kernel low-level debugging messages via MSM UART2"
266 depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
267 help
268 Say Y here if you want the debug print routines to direct
269 their output to the second serial port on MSM devices.
270
271 config DEBUG_MSM_UART3
272 bool "Kernel low-level debugging messages via MSM UART3"
273 depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
274 help
275 Say Y here if you want the debug print routines to direct
276 their output to the third serial port on MSM devices.
277
Stephen Boyda3d3ef92011-11-08 10:33:04 -0800278 config DEBUG_MSM8660_UART
279 bool "Kernel low-level debugging messages via MSM 8660 UART"
280 depends on ARCH_MSM8X60
281 select MSM_HAS_DEBUG_UART_HS
282 help
283 Say Y here if you want the debug print routines to direct
284 their output to the serial port on MSM 8660 devices.
285
286 config DEBUG_MSM8960_UART
287 bool "Kernel low-level debugging messages via MSM 8960 UART"
288 depends on ARCH_MSM8960
289 select MSM_HAS_DEBUG_UART_HS
290 help
291 Say Y here if you want the debug print routines to direct
292 their output to the serial port on MSM 8960 devices.
293
Rob Herringbfd5af92012-09-02 14:41:34 -0500294 config DEBUG_MVEBU_UART
295 bool "Kernel low-level debugging messages via MVEBU UART"
296 depends on ARCH_MVEBU
297 help
298 Say Y here if you want kernel low-level debugging support
299 on MVEBU based platforms.
300
Tony Lindgren808b7e02013-01-11 11:24:19 -0800301 config DEBUG_OMAP2PLUS_UART
302 bool "Kernel low-level debugging messages via OMAP2PLUS UART"
303 depends on ARCH_OMAP2PLUS
304 help
305 Say Y here if you want kernel low-level debugging support
306 on OMAP2PLUS based platforms.
307
Rob Herring59bba2a2012-09-06 14:14:46 -0500308 config DEBUG_PICOXCELL_UART
309 depends on ARCH_PICOXCELL
310 bool "Use PicoXcell UART for low-level debug"
311 help
312 Say Y here if you want kernel low-level debugging support
313 on PicoXcell based platforms.
314
Russell Kinge76f4752011-11-23 17:44:05 +0000315 config DEBUG_REALVIEW_STD_PORT
316 bool "RealView Default UART"
317 depends on ARCH_REALVIEW
318 help
319 Say Y here if you want the debug print routines to direct
320 their output to the serial port on RealView EB, PB11MP, PBA8
321 and PBX platforms.
322
323 config DEBUG_REALVIEW_PB1176_PORT
324 bool "RealView PB1176 UART"
325 depends on MACH_REALVIEW_PB1176
326 help
327 Say Y here if you want the debug print routines to direct
328 their output to the standard serial port on the RealView
329 PB1176 platform.
330
331 config DEBUG_S3C_UART0
332 depends on PLAT_SAMSUNG
333 bool "Use S3C UART 0 for low-level debug"
334 help
335 Say Y here if you want the debug print routines to direct
336 their output to UART 0. The port must have been initialised
337 by the boot-loader before use.
338
339 The uncompressor code port configuration is now handled
340 by CONFIG_S3C_LOWLEVEL_UART_PORT.
341
342 config DEBUG_S3C_UART1
343 depends on PLAT_SAMSUNG
344 bool "Use S3C UART 1 for low-level debug"
345 help
346 Say Y here if you want the debug print routines to direct
347 their output to UART 1. The port must have been initialised
348 by the boot-loader before use.
349
350 The uncompressor code port configuration is now handled
351 by CONFIG_S3C_LOWLEVEL_UART_PORT.
352
353 config DEBUG_S3C_UART2
354 depends on PLAT_SAMSUNG
355 bool "Use S3C UART 2 for low-level debug"
356 help
357 Say Y here if you want the debug print routines to direct
358 their output to UART 2. The port must have been initialised
359 by the boot-loader before use.
360
361 The uncompressor code port configuration is now handled
362 by CONFIG_S3C_LOWLEVEL_UART_PORT.
363
Olof Johansson5fa23dd2012-11-22 14:24:04 +0900364 config DEBUG_S3C_UART3
365 depends on PLAT_SAMSUNG && ARCH_EXYNOS
366 bool "Use S3C UART 3 for low-level debug"
367 help
368 Say Y here if you want the debug print routines to direct
369 their output to UART 3. The port must have been initialised
370 by the boot-loader before use.
371
372 The uncompressor code port configuration is now handled
373 by CONFIG_S3C_LOWLEVEL_UART_PORT.
374
Rob Herring6111bf72012-09-06 14:11:28 -0500375 config DEBUG_SOCFPGA_UART
376 depends on ARCH_SOCFPGA
377 bool "Use SOCFPGA UART for low-level debug"
378 help
379 Say Y here if you want kernel low-level debugging support
380 on SOCFPGA based platforms.
381
Stefan Roeseaa251152012-11-19 12:09:41 +0100382 config DEBUG_SUNXI_UART0
383 bool "Kernel low-level debugging messages via sunXi UART0"
384 depends on ARCH_SUNXI
385 help
386 Say Y here if you want kernel low-level debugging support
387 on Allwinner A1X based platforms on the UART0.
388
Maxime Ripardcb84fa12012-11-08 12:40:49 +0100389 config DEBUG_SUNXI_UART1
390 bool "Kernel low-level debugging messages via sunXi UART1"
391 depends on ARCH_SUNXI
392 help
393 Say Y here if you want kernel low-level debugging support
394 on Allwinner A1X based platforms on the UART1.
395
Stephen Warren46067802012-09-25 15:54:56 -0600396 config DEBUG_TEGRA_UART
397 depends on ARCH_TEGRA
398 bool "Use Tegra UART for low-level debug"
399 help
400 Say Y here if you want kernel low-level debugging support
401 on Tegra based platforms.
402
Barry Song7f46a102012-12-20 19:45:25 +0800403 config DEBUG_SIRFPRIMA2_UART1
404 bool "Kernel low-level debugging messages via SiRFprimaII UART1"
405 depends on ARCH_PRIMA2
406 help
407 Say Y here if you want the debug print routines to direct
408 their output to the uart1 port on SiRFprimaII devices.
409
410 config DEBUG_SIRFMARCO_UART1
411 bool "Kernel low-level debugging messages via SiRFmarco UART1"
412 depends on ARCH_MARCO
413 help
414 Say Y here if you want the debug print routines to direct
415 their output to the uart1 port on SiRFmarco devices.
416
Pawel Moll1b820ea2012-07-11 17:07:25 +0100417 config DEBUG_VEXPRESS_UART0_DETECT
418 bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
419 depends on ARCH_VEXPRESS && CPU_CP15_MMU
420 help
421 This option enables a simple heuristic which tries to determine
422 the motherboard's memory map variant (original or RS1) and then
423 choose the relevant UART0 base address.
424
425 Note that this will only work with standard A-class core tiles,
426 and may fail with non-standard SMM or custom software models.
427
428 config DEBUG_VEXPRESS_UART0_CA9
429 bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)"
430 depends on ARCH_VEXPRESS
431 help
432 This option selects UART0 at 0x10009000. Except for custom models,
433 this applies only to the V2P-CA9 tile.
434
435 config DEBUG_VEXPRESS_UART0_RS1
436 bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
437 depends on ARCH_VEXPRESS
438 help
439 This option selects UART0 at 0x1c090000. This applies to most
440 of the tiles using the RS1 memory map, including all new A-class
441 core tiles, FPGA-based SMMs and software models.
442
Tony Priskb61a2722012-12-28 12:09:18 +1300443 config DEBUG_VT8500_UART0
444 bool "Use UART0 on VIA/Wondermedia SoCs"
445 depends on ARCH_VT8500
446 help
447 This option selects UART0 on VIA/Wondermedia System-on-a-chip
448 devices, including VT8500, WM8505, WM8650 and WM8850.
449
Russell Kinge76f4752011-11-23 17:44:05 +0000450 config DEBUG_LL_UART_NONE
451 bool "No low-level debugging UART"
Rob Herring387798b2012-09-06 13:41:12 -0500452 depends on !ARCH_MULTIPLATFORM
Russell Kinge76f4752011-11-23 17:44:05 +0000453 help
454 Say Y here if your platform doesn't provide a UART option
455 below. This relies on your platform choosing the right UART
456 definition internally in order for low-level debugging to
457 work.
458
459 config DEBUG_ICEDCC
460 bool "Kernel low-level debugging via EmbeddedICE DCC channel"
461 help
462 Say Y here if you want the debug print routines to direct
463 their output to the EmbeddedICE macrocell's DCC channel using
464 co-processor 14. This is known to work on the ARM9 style ICE
465 channel and on the XScale with the PEEDI.
466
467 Note that the system will appear to hang during boot if there
468 is nothing connected to read from the DCC.
469
Russell Kingb0df8982012-03-27 11:30:31 +0100470 config DEBUG_SEMIHOSTING
Stephen Boyd62194bd2012-09-06 21:24:32 +0100471 bool "Kernel low-level debug output via semihosting I/O"
Russell Kingb0df8982012-03-27 11:30:31 +0100472 help
473 Semihosting enables code running on an ARM target to use
474 the I/O facilities on a host debugger/emulator through a
Stephen Boyd62194bd2012-09-06 21:24:32 +0100475 simple SVC call. The host debugger or emulator must have
Russell Kingb0df8982012-03-27 11:30:31 +0100476 semihosting enabled for the special svc call to be trapped
477 otherwise the kernel will crash.
478
Stephen Boyd62194bd2012-09-06 21:24:32 +0100479 This is known to work with OpenOCD, as well as
Russell Kingb0df8982012-03-27 11:30:31 +0100480 ARM's Fast Models, or any other controlling environment
481 that implements semihosting.
482
483 For more details about semihosting, please see
484 chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
485
Will Deacon17916b22011-09-01 18:58:51 +0100486endchoice
487
Shawn Guof8c95fe2012-12-12 19:03:53 +0800488config DEBUG_IMX_UART_PORT
489 int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
490 DEBUG_IMX25_UART || \
491 DEBUG_IMX21_IMX27_UART || \
492 DEBUG_IMX31_UART || \
493 DEBUG_IMX35_UART || \
494 DEBUG_IMX51_UART || \
495 DEBUG_IMX50_IMX53_UART || \
496 DEBUG_IMX6Q_UART
Shawn Guo49c9e602012-10-08 13:44:29 +0800497 default 1
Shawn Guo49c9e602012-10-08 13:44:29 +0800498 help
499 Choose UART port on which kernel low-level debug messages
500 should be output.
501
Stephen Warren46067802012-09-25 15:54:56 -0600502choice
503 prompt "Low-level debug console UART"
Tony Lindgren808b7e02013-01-11 11:24:19 -0800504 depends on DEBUG_OMAP2PLUS_UART
505
506 config DEBUG_OMAP2UART1
507 bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
508 help
509 This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
510 omap3 torpedo and 3530 lv som.
511
512 config DEBUG_OMAP2UART2
513 bool "OMAP2/3/4 UART2"
514
515 config DEBUG_OMAP2UART3
516 bool "OMAP2 UART3 (n8x0)"
517
518 config DEBUG_OMAP3UART3
519 bool "OMAP3 UART3 (most omap3 boards)"
520 help
521 This covers at least cm_t3x, beagle, crane, devkit8000,
522 igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
523 and 3517evm.
524
525 config DEBUG_OMAP4UART3
526 bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
527
528 config DEBUG_OMAP3UART4
529 bool "OMAP36XX UART4"
530
531 config DEBUG_OMAP4UART4
532 bool "OMAP4/5 UART4"
533
534 config DEBUG_TI81XXUART1
535 bool "TI81XX UART1 (ti8148evm)"
536
537 config DEBUG_TI81XXUART2
538 bool "TI81XX UART2"
539
540 config DEBUG_TI81XXUART3
541 bool "TI81XX UART3 (ti8168evm)"
542
543 config DEBUG_AM33XXUART1
544 bool "AM33XX UART1"
545
546 config DEBUG_ZOOM_UART
547 bool "Zoom2/3 UART"
548endchoice
549
550choice
551 prompt "Low-level debug console UART"
Stephen Warren46067802012-09-25 15:54:56 -0600552 depends on DEBUG_LL && DEBUG_TEGRA_UART
553
554 config TEGRA_DEBUG_UART_AUTO_ODMDATA
555 bool "Via ODMDATA"
556 help
557 Automatically determines which UART to use for low-level debug based
558 on the ODMDATA value. This value is part of the BCT, and is written
559 to the boot memory device using nvflash, or other flashing tool.
560 When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
561 0/1/2/3/4 are UART A/B/C/D/E.
562
563 config TEGRA_DEBUG_UARTA
564 bool "UART A"
565
566 config TEGRA_DEBUG_UARTB
567 bool "UART B"
568
569 config TEGRA_DEBUG_UARTC
570 bool "UART C"
571
572 config TEGRA_DEBUG_UARTD
573 bool "UART D"
574
575 config TEGRA_DEBUG_UARTE
576 bool "UART E"
577
578endchoice
579
Rob Herring91a9fec2012-08-31 00:03:46 -0500580config DEBUG_LL_INCLUDE
581 string
582 default "debug/icedcc.S" if DEBUG_ICEDCC
Shawn Guo6dde5ac2012-09-16 20:50:45 +0800583 default "debug/imx.S" if DEBUG_IMX1_UART || \
584 DEBUG_IMX25_UART || \
585 DEBUG_IMX21_IMX27_UART || \
Shawn Guo4ad625d2012-12-12 18:54:01 +0800586 DEBUG_IMX31_UART || \
587 DEBUG_IMX35_UART || \
Shawn Guo6dde5ac2012-09-16 20:50:45 +0800588 DEBUG_IMX51_UART || \
Fabio Estevam7356420c2013-01-22 10:40:55 -0200589 DEBUG_IMX53_UART ||\
Shawn Guo49c9e602012-10-08 13:44:29 +0800590 DEBUG_IMX6Q_UART
Rob Herring2e9bb082012-08-31 00:04:22 -0500591 default "debug/highbank.S" if DEBUG_HIGHBANK_UART
Rob Herringbfd5af92012-09-02 14:41:34 -0500592 default "debug/mvebu.S" if DEBUG_MVEBU_UART
Tony Lindgren808b7e02013-01-11 11:24:19 -0800593 default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
Rob Herring59bba2a2012-09-06 14:14:46 -0500594 default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
Rob Herring6111bf72012-09-06 14:11:28 -0500595 default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
Stefan Roeseaa251152012-11-19 12:09:41 +0100596 default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
Rob Herringfa04e4d2012-08-31 00:08:21 -0500597 default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
598 DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
Tony Priskb61a2722012-12-28 12:09:18 +1300599 default "debug/vt8500.S" if DEBUG_VT8500_UART0
Stephen Warren46067802012-09-25 15:54:56 -0600600 default "debug/tegra.S" if DEBUG_TEGRA_UART
Josh Cartwright385f02b2012-11-19 10:16:01 -0600601 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
Rob Herring91a9fec2012-08-31 00:03:46 -0500602 default "mach/debug-macro.S"
603
Catalin Marinas93fd03a2009-12-09 10:02:18 +0000604config EARLY_PRINTK
605 bool "Early printk"
606 depends on DEBUG_LL
607 help
608 Say Y here if you want to have an early console using the
609 kernel low-level debugging functions. Add earlyprintk to your
610 kernel parameters to enable this console.
611
Alexander Shishkinc5d6c772009-12-01 14:00:51 +0100612config OC_ETM
613 bool "On-chip ETM and ETB"
Arnd Bergmann53eebb02011-09-07 10:02:35 +0200614 depends on ARM_AMBA
Alexander Shishkinc5d6c772009-12-01 14:00:51 +0100615 help
616 Enables the on-chip embedded trace macrocell and embedded trace
617 buffer driver that will allow you to collect traces of the
618 kernel code.
619
Jon Medhurst4189bc72011-08-27 12:36:58 +0100620config ARM_KPROBES_TEST
621 tristate "Kprobes test module"
622 depends on KPROBES && MODULES
623 help
624 Perform tests of kprobes API and instruction set simulation.
625
Will Deacon575320d2012-07-06 15:43:03 +0100626config PID_IN_CONTEXTIDR
627 bool "Write the current PID to the CONTEXTIDR register"
628 depends on CPU_COPY_V6
629 help
630 Enabling this option causes the kernel to write the current PID to
631 the PROCID field of the CONTEXTIDR register, at the expense of some
632 additional instructions during context switch. Say Y here only if you
633 are planning to use hardware trace tools with this kernel.
634
Linus Torvalds1da177e2005-04-16 15:20:36 -0700635endmenu