blob: 104fd9a63e734ddc752f68de92215a208242a0d1 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Jeff Garzikaf36d7f2005-08-28 20:18:39 -04002 * libata-scsi.c - helper library for ATA
3 *
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
6 * on emails.
7 *
8 * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
9 * Copyright 2003-2004 Jeff Garzik
10 *
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
15 * any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
25 *
26 *
27 * libata documentation is available via 'make {ps|pdf}docs',
28 * as Documentation/DocBook/libata.*
29 *
30 * Hardware documentation available from
31 * - http://www.t10.org/
32 * - http://www.t13.org/
33 *
Linus Torvalds1da177e2005-04-16 15:20:36 -070034 */
35
36#include <linux/kernel.h>
37#include <linux/blkdev.h>
38#include <linux/spinlock.h>
39#include <scsi/scsi.h>
40#include "scsi.h"
41#include <scsi/scsi_host.h>
42#include <linux/libata.h>
43#include <asm/uaccess.h>
44
45#include "libata.h"
46
47typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd);
48static struct ata_device *
49ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev);
50
51
52/**
53 * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
54 * @sdev: SCSI device for which BIOS geometry is to be determined
55 * @bdev: block device associated with @sdev
56 * @capacity: capacity of SCSI device
57 * @geom: location to which geometry will be output
58 *
59 * Generic bios head/sector/cylinder calculator
60 * used by sd. Most BIOSes nowadays expect a XXX/255/16 (CHS)
61 * mapping. Some situations may arise where the disk is not
62 * bootable if this is not used.
63 *
64 * LOCKING:
65 * Defined by the SCSI layer. We don't really care.
66 *
67 * RETURNS:
68 * Zero.
69 */
70int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
71 sector_t capacity, int geom[])
72{
73 geom[0] = 255;
74 geom[1] = 63;
75 sector_div(capacity, 255*63);
76 geom[2] = capacity;
77
78 return 0;
79}
80
81int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
82{
83 struct ata_port *ap;
84 struct ata_device *dev;
85 int val = -EINVAL, rc = -EINVAL;
86
87 ap = (struct ata_port *) &scsidev->host->hostdata[0];
88 if (!ap)
89 goto out;
90
91 dev = ata_scsi_find_dev(ap, scsidev);
92 if (!dev) {
93 rc = -ENODEV;
94 goto out;
95 }
96
97 switch (cmd) {
98 case ATA_IOC_GET_IO32:
99 val = 0;
100 if (copy_to_user(arg, &val, 1))
101 return -EFAULT;
102 return 0;
103
104 case ATA_IOC_SET_IO32:
105 val = (unsigned long) arg;
106 if (val != 0)
107 return -EINVAL;
108 return 0;
109
110 default:
111 rc = -ENOTTY;
112 break;
113 }
114
115out:
116 return rc;
117}
118
119/**
120 * ata_scsi_qc_new - acquire new ata_queued_cmd reference
121 * @ap: ATA port to which the new command is attached
122 * @dev: ATA device to which the new command is attached
123 * @cmd: SCSI command that originated this ATA command
124 * @done: SCSI command completion function
125 *
126 * Obtain a reference to an unused ata_queued_cmd structure,
127 * which is the basic libata structure representing a single
128 * ATA command sent to the hardware.
129 *
130 * If a command was available, fill in the SCSI-specific
131 * portions of the structure with information on the
132 * current command.
133 *
134 * LOCKING:
135 * spin_lock_irqsave(host_set lock)
136 *
137 * RETURNS:
138 * Command allocated, or %NULL if none available.
139 */
140struct ata_queued_cmd *ata_scsi_qc_new(struct ata_port *ap,
141 struct ata_device *dev,
142 struct scsi_cmnd *cmd,
143 void (*done)(struct scsi_cmnd *))
144{
145 struct ata_queued_cmd *qc;
146
147 qc = ata_qc_new_init(ap, dev);
148 if (qc) {
149 qc->scsicmd = cmd;
150 qc->scsidone = done;
151
152 if (cmd->use_sg) {
153 qc->sg = (struct scatterlist *) cmd->request_buffer;
154 qc->n_elem = cmd->use_sg;
155 } else {
156 qc->sg = &qc->sgent;
157 qc->n_elem = 1;
158 }
159 } else {
160 cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1);
161 done(cmd);
162 }
163
164 return qc;
165}
166
167/**
168 * ata_to_sense_error - convert ATA error to SCSI error
169 * @qc: Command that we are erroring out
170 * @drv_stat: value contained in ATA status register
171 *
172 * Converts an ATA error into a SCSI error. While we are at it
173 * we decode and dump the ATA error for the user so that they
174 * have some idea what really happened at the non make-believe
175 * layer.
176 *
177 * LOCKING:
178 * spin_lock_irqsave(host_set lock)
179 */
180
181void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat)
182{
183 struct scsi_cmnd *cmd = qc->scsicmd;
184 u8 err = 0;
185 unsigned char *sb = cmd->sense_buffer;
186 /* Based on the 3ware driver translation table */
187 static unsigned char sense_table[][4] = {
188 /* BBD|ECC|ID|MAR */
189 {0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command
190 /* BBD|ECC|ID */
191 {0xd0, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command
192 /* ECC|MC|MARK */
193 {0x61, HARDWARE_ERROR, 0x00, 0x00}, // Device fault Hardware error
194 /* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */
195 {0x84, ABORTED_COMMAND, 0x47, 0x00}, // Data CRC error SCSI parity error
196 /* MC|ID|ABRT|TRK0|MARK */
197 {0x37, NOT_READY, 0x04, 0x00}, // Unit offline Not ready
198 /* MCR|MARK */
199 {0x09, NOT_READY, 0x04, 0x00}, // Unrecovered disk error Not ready
200 /* Bad address mark */
201 {0x01, MEDIUM_ERROR, 0x13, 0x00}, // Address mark not found Address mark not found for data field
202 /* TRK0 */
203 {0x02, HARDWARE_ERROR, 0x00, 0x00}, // Track 0 not found Hardware error
204 /* Abort & !ICRC */
205 {0x04, ABORTED_COMMAND, 0x00, 0x00}, // Aborted command Aborted command
206 /* Media change request */
207 {0x08, NOT_READY, 0x04, 0x00}, // Media change request FIXME: faking offline
208 /* SRV */
209 {0x10, ABORTED_COMMAND, 0x14, 0x00}, // ID not found Recorded entity not found
210 /* Media change */
211 {0x08, NOT_READY, 0x04, 0x00}, // Media change FIXME: faking offline
212 /* ECC */
213 {0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error
214 /* BBD - block marked bad */
215 {0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error
216 {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
217 };
218 static unsigned char stat_table[][4] = {
219 /* Must be first because BUSY means no other bits valid */
220 {0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now
221 {0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault
222 {0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now
223 {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered
224 {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
225 };
226 int i = 0;
227
228 cmd->result = SAM_STAT_CHECK_CONDITION;
229
230 /*
231 * Is this an error we can process/parse
232 */
233
234 if(drv_stat & ATA_ERR)
235 /* Read the err bits */
236 err = ata_chk_err(qc->ap);
237
238 /* Display the ATA level error info */
239
240 printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat);
241 if(drv_stat & 0x80)
242 {
243 printk("Busy ");
244 err = 0; /* Data is not valid in this case */
245 }
246 else {
247 if(drv_stat & 0x40) printk("DriveReady ");
248 if(drv_stat & 0x20) printk("DeviceFault ");
249 if(drv_stat & 0x10) printk("SeekComplete ");
250 if(drv_stat & 0x08) printk("DataRequest ");
251 if(drv_stat & 0x04) printk("CorrectedError ");
252 if(drv_stat & 0x02) printk("Index ");
253 if(drv_stat & 0x01) printk("Error ");
254 }
255 printk("}\n");
256
257 if(err)
258 {
259 printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err);
260 if(err & 0x04) printk("DriveStatusError ");
261 if(err & 0x80)
262 {
263 if(err & 0x04)
264 printk("BadCRC ");
265 else
266 printk("Sector ");
267 }
268 if(err & 0x40) printk("UncorrectableError ");
269 if(err & 0x10) printk("SectorIdNotFound ");
270 if(err & 0x02) printk("TrackZeroNotFound ");
271 if(err & 0x01) printk("AddrMarkNotFound ");
272 printk("}\n");
273
274 /* Should we dump sector info here too ?? */
275 }
276
277
278 /* Look for err */
279 while(sense_table[i][0] != 0xFF)
280 {
281 /* Look for best matches first */
282 if((sense_table[i][0] & err) == sense_table[i][0])
283 {
284 sb[0] = 0x70;
285 sb[2] = sense_table[i][1];
286 sb[7] = 0x0a;
287 sb[12] = sense_table[i][2];
288 sb[13] = sense_table[i][3];
289 return;
290 }
291 i++;
292 }
293 /* No immediate match */
294 if(err)
295 printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err);
296
297 i = 0;
298 /* Fall back to interpreting status bits */
299 while(stat_table[i][0] != 0xFF)
300 {
301 if(stat_table[i][0] & drv_stat)
302 {
303 sb[0] = 0x70;
304 sb[2] = stat_table[i][1];
305 sb[7] = 0x0a;
306 sb[12] = stat_table[i][2];
307 sb[13] = stat_table[i][3];
308 return;
309 }
310 i++;
311 }
312 /* No error ?? */
313 printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
314 /* additional-sense-code[-qualifier] */
315
316 sb[0] = 0x70;
317 sb[2] = MEDIUM_ERROR;
318 sb[7] = 0x0A;
be7db052005-04-17 15:26:13 -0500319 if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700320 sb[12] = 0x11; /* "unrecovered read error" */
321 sb[13] = 0x04;
322 } else {
323 sb[12] = 0x0C; /* "write error - */
324 sb[13] = 0x02; /* auto-reallocation failed" */
325 }
326}
327
328/**
329 * ata_scsi_slave_config - Set SCSI device attributes
330 * @sdev: SCSI device to examine
331 *
332 * This is called before we actually start reading
333 * and writing to the device, to configure certain
334 * SCSI mid-layer behaviors.
335 *
336 * LOCKING:
337 * Defined by SCSI layer. We don't really care.
338 */
339
340int ata_scsi_slave_config(struct scsi_device *sdev)
341{
342 sdev->use_10_for_rw = 1;
343 sdev->use_10_for_ms = 1;
344
345 blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD);
346
347 if (sdev->id < ATA_MAX_DEVICES) {
348 struct ata_port *ap;
349 struct ata_device *dev;
350
351 ap = (struct ata_port *) &sdev->host->hostdata[0];
352 dev = &ap->device[sdev->id];
353
354 /* TODO: 1024 is an arbitrary number, not the
355 * hardware maximum. This should be increased to
356 * 65534 when Jens Axboe's patch for dynamically
357 * determining max_sectors is merged.
358 */
359 if ((dev->flags & ATA_DFLAG_LBA48) &&
360 ((dev->flags & ATA_DFLAG_LOCK_SECTORS) == 0)) {
John W. Linvillef85bdb92005-05-12 15:49:54 -0400361 /*
362 * do not overwrite sdev->host->max_sectors, since
363 * other drives on this host may not support LBA48
364 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365 blk_queue_max_sectors(sdev->request_queue, 2048);
366 }
367 }
368
369 return 0; /* scsi layer doesn't check return value, sigh */
370}
371
372/**
373 * ata_scsi_error - SCSI layer error handler callback
374 * @host: SCSI host on which error occurred
375 *
376 * Handles SCSI-layer-thrown error events.
377 *
378 * LOCKING:
379 * Inherited from SCSI layer (none, can sleep)
380 *
381 * RETURNS:
382 * Zero.
383 */
384
385int ata_scsi_error(struct Scsi_Host *host)
386{
387 struct ata_port *ap;
388
389 DPRINTK("ENTER\n");
390
391 ap = (struct ata_port *) &host->hostdata[0];
392 ap->ops->eng_timeout(ap);
393
394 /* TODO: this is per-command; when queueing is supported
395 * this code will either change or move to a more
396 * appropriate place
397 */
398 host->host_failed--;
Tejun Heo42517432005-08-10 13:38:27 -0400399 INIT_LIST_HEAD(&host->eh_cmd_q);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700400
401 DPRINTK("EXIT\n");
402 return 0;
403}
404
405/**
Douglas Gilbert972dcaf2005-08-11 03:35:53 -0400406 * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
407 * @qc: Storage for translated ATA taskfile
408 * @scsicmd: SCSI command to translate
409 *
410 * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY
411 * (to start). Perhaps these commands should be preceded by
412 * CHECK POWER MODE to see what power mode the device is already in.
413 * [See SAT revision 5 at www.t10.org]
414 *
415 * LOCKING:
416 * spin_lock_irqsave(host_set lock)
417 *
418 * RETURNS:
419 * Zero on success, non-zero on error.
420 */
421
422static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
423 u8 *scsicmd)
424{
425 struct ata_taskfile *tf = &qc->tf;
426
427 tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
428 tf->protocol = ATA_PROT_NODATA;
429 if (scsicmd[1] & 0x1) {
430 ; /* ignore IMMED bit, violates sat-r05 */
431 }
432 if (scsicmd[4] & 0x2)
433 return 1; /* LOEJ bit set not supported */
434 if (((scsicmd[4] >> 4) & 0xf) != 0)
435 return 1; /* power conditions not supported */
436 if (scsicmd[4] & 0x1) {
437 tf->nsect = 1; /* 1 sector, lba=0 */
438 tf->lbah = 0x0;
439 tf->lbam = 0x0;
440 tf->lbal = 0x0;
441 tf->device |= ATA_LBA;
442 tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
443 } else {
444 tf->nsect = 0; /* time period value (0 implies now) */
445 tf->command = ATA_CMD_STANDBY;
446 /* Consider: ATA STANDBY IMMEDIATE command */
447 }
448 /*
449 * Standby and Idle condition timers could be implemented but that
450 * would require libata to implement the Power condition mode page
451 * and allow the user to change it. Changing mode pages requires
452 * MODE SELECT to be implemented.
453 */
454
455 return 0;
456}
457
458
459/**
Linus Torvalds1da177e2005-04-16 15:20:36 -0700460 * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command
461 * @qc: Storage for translated ATA taskfile
462 * @scsicmd: SCSI command to translate (ignored)
463 *
464 * Sets up an ATA taskfile to issue FLUSH CACHE or
465 * FLUSH CACHE EXT.
466 *
467 * LOCKING:
468 * spin_lock_irqsave(host_set lock)
469 *
470 * RETURNS:
471 * Zero on success, non-zero on error.
472 */
473
474static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
475{
476 struct ata_taskfile *tf = &qc->tf;
477
478 tf->flags |= ATA_TFLAG_DEVICE;
479 tf->protocol = ATA_PROT_NODATA;
480
481 if ((tf->flags & ATA_TFLAG_LBA48) &&
482 (ata_id_has_flush_ext(qc->dev->id)))
483 tf->command = ATA_CMD_FLUSH_EXT;
484 else
485 tf->command = ATA_CMD_FLUSH;
486
487 return 0;
488}
489
490/**
491 * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one
492 * @qc: Storage for translated ATA taskfile
493 * @scsicmd: SCSI command to translate
494 *
495 * Converts SCSI VERIFY command to an ATA READ VERIFY command.
496 *
497 * LOCKING:
498 * spin_lock_irqsave(host_set lock)
499 *
500 * RETURNS:
501 * Zero on success, non-zero on error.
502 */
503
504static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
505{
506 struct ata_taskfile *tf = &qc->tf;
507 unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
508 u64 dev_sectors = qc->dev->n_sectors;
509 u64 sect = 0;
510 u32 n_sect = 0;
511
512 tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
513 tf->protocol = ATA_PROT_NODATA;
514 tf->device |= ATA_LBA;
515
516 if (scsicmd[0] == VERIFY) {
517 sect |= ((u64)scsicmd[2]) << 24;
518 sect |= ((u64)scsicmd[3]) << 16;
519 sect |= ((u64)scsicmd[4]) << 8;
520 sect |= ((u64)scsicmd[5]);
521
522 n_sect |= ((u32)scsicmd[7]) << 8;
523 n_sect |= ((u32)scsicmd[8]);
524 }
525
526 else if (scsicmd[0] == VERIFY_16) {
527 sect |= ((u64)scsicmd[2]) << 56;
528 sect |= ((u64)scsicmd[3]) << 48;
529 sect |= ((u64)scsicmd[4]) << 40;
530 sect |= ((u64)scsicmd[5]) << 32;
531 sect |= ((u64)scsicmd[6]) << 24;
532 sect |= ((u64)scsicmd[7]) << 16;
533 sect |= ((u64)scsicmd[8]) << 8;
534 sect |= ((u64)scsicmd[9]);
535
536 n_sect |= ((u32)scsicmd[10]) << 24;
537 n_sect |= ((u32)scsicmd[11]) << 16;
538 n_sect |= ((u32)scsicmd[12]) << 8;
539 n_sect |= ((u32)scsicmd[13]);
540 }
541
542 else
543 return 1;
544
545 if (!n_sect)
546 return 1;
547 if (sect >= dev_sectors)
548 return 1;
549 if ((sect + n_sect) > dev_sectors)
550 return 1;
551 if (lba48) {
552 if (n_sect > (64 * 1024))
553 return 1;
554 } else {
555 if (n_sect > 256)
556 return 1;
557 }
558
559 if (lba48) {
560 tf->command = ATA_CMD_VERIFY_EXT;
561
562 tf->hob_nsect = (n_sect >> 8) & 0xff;
563
564 tf->hob_lbah = (sect >> 40) & 0xff;
565 tf->hob_lbam = (sect >> 32) & 0xff;
566 tf->hob_lbal = (sect >> 24) & 0xff;
567 } else {
568 tf->command = ATA_CMD_VERIFY;
569
570 tf->device |= (sect >> 24) & 0xf;
571 }
572
573 tf->nsect = n_sect & 0xff;
574
575 tf->lbah = (sect >> 16) & 0xff;
576 tf->lbam = (sect >> 8) & 0xff;
577 tf->lbal = sect & 0xff;
578
579 return 0;
580}
581
582/**
583 * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one
584 * @qc: Storage for translated ATA taskfile
585 * @scsicmd: SCSI command to translate
586 *
587 * Converts any of six SCSI read/write commands into the
588 * ATA counterpart, including starting sector (LBA),
589 * sector count, and taking into account the device's LBA48
590 * support.
591 *
592 * Commands %READ_6, %READ_10, %READ_16, %WRITE_6, %WRITE_10, and
593 * %WRITE_16 are currently supported.
594 *
595 * LOCKING:
596 * spin_lock_irqsave(host_set lock)
597 *
598 * RETURNS:
599 * Zero on success, non-zero on error.
600 */
601
602static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
603{
604 struct ata_taskfile *tf = &qc->tf;
605 unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
606
607 tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
608 tf->protocol = qc->dev->xfer_protocol;
609 tf->device |= ATA_LBA;
610
611 if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 ||
612 scsicmd[0] == READ_16) {
613 tf->command = qc->dev->read_cmd;
614 } else {
615 tf->command = qc->dev->write_cmd;
616 tf->flags |= ATA_TFLAG_WRITE;
617 }
618
619 if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) {
620 if (lba48) {
621 tf->hob_nsect = scsicmd[7];
622 tf->hob_lbal = scsicmd[2];
623
624 qc->nsect = ((unsigned int)scsicmd[7] << 8) |
625 scsicmd[8];
626 } else {
627 /* if we don't support LBA48 addressing, the request
628 * -may- be too large. */
629 if ((scsicmd[2] & 0xf0) || scsicmd[7])
630 return 1;
631
632 /* stores LBA27:24 in lower 4 bits of device reg */
633 tf->device |= scsicmd[2];
634
635 qc->nsect = scsicmd[8];
636 }
637
638 tf->nsect = scsicmd[8];
639 tf->lbal = scsicmd[5];
640 tf->lbam = scsicmd[4];
641 tf->lbah = scsicmd[3];
642
643 VPRINTK("ten-byte command\n");
Jeff Garzik13593262005-08-27 04:20:12 -0400644 if (qc->nsect == 0) /* we don't support length==0 cmds */
645 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700646 return 0;
647 }
648
649 if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) {
650 qc->nsect = tf->nsect = scsicmd[4];
Jeff Garzik13593262005-08-27 04:20:12 -0400651 if (!qc->nsect) {
652 qc->nsect = 256;
653 if (lba48)
654 tf->hob_nsect = 1;
655 }
656
Linus Torvalds1da177e2005-04-16 15:20:36 -0700657 tf->lbal = scsicmd[3];
658 tf->lbam = scsicmd[2];
659 tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */
660
661 VPRINTK("six-byte command\n");
662 return 0;
663 }
664
665 if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) {
666 /* rule out impossible LBAs and sector counts */
667 if (scsicmd[2] || scsicmd[3] || scsicmd[10] || scsicmd[11])
668 return 1;
669
670 if (lba48) {
671 tf->hob_nsect = scsicmd[12];
672 tf->hob_lbal = scsicmd[6];
673 tf->hob_lbam = scsicmd[5];
674 tf->hob_lbah = scsicmd[4];
675
676 qc->nsect = ((unsigned int)scsicmd[12] << 8) |
677 scsicmd[13];
678 } else {
679 /* once again, filter out impossible non-zero values */
680 if (scsicmd[4] || scsicmd[5] || scsicmd[12] ||
681 (scsicmd[6] & 0xf0))
682 return 1;
683
684 /* stores LBA27:24 in lower 4 bits of device reg */
685 tf->device |= scsicmd[6];
686
687 qc->nsect = scsicmd[13];
688 }
689
690 tf->nsect = scsicmd[13];
691 tf->lbal = scsicmd[9];
692 tf->lbam = scsicmd[8];
693 tf->lbah = scsicmd[7];
694
695 VPRINTK("sixteen-byte command\n");
Jeff Garzik13593262005-08-27 04:20:12 -0400696 if (qc->nsect == 0) /* we don't support length==0 cmds */
697 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700698 return 0;
699 }
700
701 DPRINTK("no-byte command\n");
702 return 1;
703}
704
705static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
706{
707 struct scsi_cmnd *cmd = qc->scsicmd;
708
709 if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ)))
710 ata_to_sense_error(qc, drv_stat);
711 else
712 cmd->result = SAM_STAT_GOOD;
713
714 qc->scsidone(cmd);
715
716 return 0;
717}
718
719/**
720 * ata_scsi_translate - Translate then issue SCSI command to ATA device
721 * @ap: ATA port to which the command is addressed
722 * @dev: ATA device to which the command is addressed
723 * @cmd: SCSI command to execute
724 * @done: SCSI command completion function
725 * @xlat_func: Actor which translates @cmd to an ATA taskfile
726 *
727 * Our ->queuecommand() function has decided that the SCSI
728 * command issued can be directly translated into an ATA
729 * command, rather than handled internally.
730 *
731 * This function sets up an ata_queued_cmd structure for the
732 * SCSI command, and sends that ata_queued_cmd to the hardware.
733 *
734 * LOCKING:
735 * spin_lock_irqsave(host_set lock)
736 */
737
738static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev,
739 struct scsi_cmnd *cmd,
740 void (*done)(struct scsi_cmnd *),
741 ata_xlat_func_t xlat_func)
742{
743 struct ata_queued_cmd *qc;
744 u8 *scsicmd = cmd->cmnd;
745
746 VPRINTK("ENTER\n");
747
748 qc = ata_scsi_qc_new(ap, dev, cmd, done);
749 if (!qc)
750 return;
751
752 /* data is present; dma-map it */
be7db052005-04-17 15:26:13 -0500753 if (cmd->sc_data_direction == DMA_FROM_DEVICE ||
754 cmd->sc_data_direction == DMA_TO_DEVICE) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700755 if (unlikely(cmd->request_bufflen < 1)) {
756 printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n",
757 ap->id, dev->devno);
758 goto err_out;
759 }
760
761 if (cmd->use_sg)
762 ata_sg_init(qc, cmd->request_buffer, cmd->use_sg);
763 else
764 ata_sg_init_one(qc, cmd->request_buffer,
765 cmd->request_bufflen);
766
767 qc->dma_dir = cmd->sc_data_direction;
768 }
769
770 qc->complete_fn = ata_scsi_qc_complete;
771
772 if (xlat_func(qc, scsicmd))
773 goto err_out;
774
775 /* select device, send command to hardware */
776 if (ata_qc_issue(qc))
777 goto err_out;
778
779 VPRINTK("EXIT\n");
780 return;
781
782err_out:
783 ata_qc_free(qc);
784 ata_bad_cdb(cmd, done);
785 DPRINTK("EXIT - badcmd\n");
786}
787
788/**
789 * ata_scsi_rbuf_get - Map response buffer.
790 * @cmd: SCSI command containing buffer to be mapped.
791 * @buf_out: Pointer to mapped area.
792 *
793 * Maps buffer contained within SCSI command @cmd.
794 *
795 * LOCKING:
796 * spin_lock_irqsave(host_set lock)
797 *
798 * RETURNS:
799 * Length of response buffer.
800 */
801
802static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out)
803{
804 u8 *buf;
805 unsigned int buflen;
806
807 if (cmd->use_sg) {
808 struct scatterlist *sg;
809
810 sg = (struct scatterlist *) cmd->request_buffer;
811 buf = kmap_atomic(sg->page, KM_USER0) + sg->offset;
812 buflen = sg->length;
813 } else {
814 buf = cmd->request_buffer;
815 buflen = cmd->request_bufflen;
816 }
817
818 *buf_out = buf;
819 return buflen;
820}
821
822/**
823 * ata_scsi_rbuf_put - Unmap response buffer.
824 * @cmd: SCSI command containing buffer to be unmapped.
825 * @buf: buffer to unmap
826 *
827 * Unmaps response buffer contained within @cmd.
828 *
829 * LOCKING:
830 * spin_lock_irqsave(host_set lock)
831 */
832
833static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf)
834{
835 if (cmd->use_sg) {
836 struct scatterlist *sg;
837
838 sg = (struct scatterlist *) cmd->request_buffer;
839 kunmap_atomic(buf - sg->offset, KM_USER0);
840 }
841}
842
843/**
844 * ata_scsi_rbuf_fill - wrapper for SCSI command simulators
845 * @args: device IDENTIFY data / SCSI command of interest.
846 * @actor: Callback hook for desired SCSI command simulator
847 *
848 * Takes care of the hard work of simulating a SCSI command...
849 * Mapping the response buffer, calling the command's handler,
850 * and handling the handler's return value. This return value
851 * indicates whether the handler wishes the SCSI command to be
852 * completed successfully, or not.
853 *
854 * LOCKING:
855 * spin_lock_irqsave(host_set lock)
856 */
857
858void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
859 unsigned int (*actor) (struct ata_scsi_args *args,
860 u8 *rbuf, unsigned int buflen))
861{
862 u8 *rbuf;
863 unsigned int buflen, rc;
864 struct scsi_cmnd *cmd = args->cmd;
865
866 buflen = ata_scsi_rbuf_get(cmd, &rbuf);
867 memset(rbuf, 0, buflen);
868 rc = actor(args, rbuf, buflen);
869 ata_scsi_rbuf_put(cmd, rbuf);
870
871 if (rc)
872 ata_bad_cdb(cmd, args->done);
873 else {
874 cmd->result = SAM_STAT_GOOD;
875 args->done(cmd);
876 }
877}
878
879/**
880 * ata_scsiop_inq_std - Simulate INQUIRY command
881 * @args: device IDENTIFY data / SCSI command of interest.
882 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
883 * @buflen: Response buffer length.
884 *
885 * Returns standard device identification data associated
886 * with non-EVPD INQUIRY command output.
887 *
888 * LOCKING:
889 * spin_lock_irqsave(host_set lock)
890 */
891
892unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf,
893 unsigned int buflen)
894{
895 u8 hdr[] = {
896 TYPE_DISK,
897 0,
898 0x5, /* claim SPC-3 version compatibility */
899 2,
900 95 - 4
901 };
902
903 /* set scsi removeable (RMB) bit per ata bit */
904 if (ata_id_removeable(args->id))
905 hdr[1] |= (1 << 7);
906
907 VPRINTK("ENTER\n");
908
909 memcpy(rbuf, hdr, sizeof(hdr));
910
911 if (buflen > 35) {
912 memcpy(&rbuf[8], "ATA ", 8);
913 ata_dev_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16);
914 ata_dev_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4);
915 if (rbuf[32] == 0 || rbuf[32] == ' ')
916 memcpy(&rbuf[32], "n/a ", 4);
917 }
918
919 if (buflen > 63) {
920 const u8 versions[] = {
921 0x60, /* SAM-3 (no version claimed) */
922
923 0x03,
924 0x20, /* SBC-2 (no version claimed) */
925
926 0x02,
927 0x60 /* SPC-3 (no version claimed) */
928 };
929
930 memcpy(rbuf + 59, versions, sizeof(versions));
931 }
932
933 return 0;
934}
935
936/**
937 * ata_scsiop_inq_00 - Simulate INQUIRY EVPD page 0, list of pages
938 * @args: device IDENTIFY data / SCSI command of interest.
939 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
940 * @buflen: Response buffer length.
941 *
942 * Returns list of inquiry EVPD pages available.
943 *
944 * LOCKING:
945 * spin_lock_irqsave(host_set lock)
946 */
947
948unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf,
949 unsigned int buflen)
950{
951 const u8 pages[] = {
952 0x00, /* page 0x00, this page */
953 0x80, /* page 0x80, unit serial no page */
954 0x83 /* page 0x83, device ident page */
955 };
956 rbuf[3] = sizeof(pages); /* number of supported EVPD pages */
957
958 if (buflen > 6)
959 memcpy(rbuf + 4, pages, sizeof(pages));
960
961 return 0;
962}
963
964/**
965 * ata_scsiop_inq_80 - Simulate INQUIRY EVPD page 80, device serial number
966 * @args: device IDENTIFY data / SCSI command of interest.
967 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
968 * @buflen: Response buffer length.
969 *
970 * Returns ATA device serial number.
971 *
972 * LOCKING:
973 * spin_lock_irqsave(host_set lock)
974 */
975
976unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf,
977 unsigned int buflen)
978{
979 const u8 hdr[] = {
980 0,
981 0x80, /* this page code */
982 0,
983 ATA_SERNO_LEN, /* page len */
984 };
985 memcpy(rbuf, hdr, sizeof(hdr));
986
987 if (buflen > (ATA_SERNO_LEN + 4 - 1))
988 ata_dev_id_string(args->id, (unsigned char *) &rbuf[4],
989 ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
990
991 return 0;
992}
993
994static const char *inq_83_str = "Linux ATA-SCSI simulator";
995
996/**
997 * ata_scsiop_inq_83 - Simulate INQUIRY EVPD page 83, device identity
998 * @args: device IDENTIFY data / SCSI command of interest.
999 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
1000 * @buflen: Response buffer length.
1001 *
1002 * Returns device identification. Currently hardcoded to
1003 * return "Linux ATA-SCSI simulator".
1004 *
1005 * LOCKING:
1006 * spin_lock_irqsave(host_set lock)
1007 */
1008
1009unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf,
1010 unsigned int buflen)
1011{
1012 rbuf[1] = 0x83; /* this page code */
1013 rbuf[3] = 4 + strlen(inq_83_str); /* page len */
1014
1015 /* our one and only identification descriptor (vendor-specific) */
1016 if (buflen > (strlen(inq_83_str) + 4 + 4 - 1)) {
1017 rbuf[4 + 0] = 2; /* code set: ASCII */
1018 rbuf[4 + 3] = strlen(inq_83_str);
1019 memcpy(rbuf + 4 + 4, inq_83_str, strlen(inq_83_str));
1020 }
1021
1022 return 0;
1023}
1024
1025/**
Jeff Garzik0cba6322005-05-30 19:49:12 -04001026 * ata_scsiop_noop - Command handler that simply returns success.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001027 * @args: device IDENTIFY data / SCSI command of interest.
1028 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
1029 * @buflen: Response buffer length.
1030 *
1031 * No operation. Simply returns success to caller, to indicate
1032 * that the caller should successfully complete this SCSI command.
1033 *
1034 * LOCKING:
1035 * spin_lock_irqsave(host_set lock)
1036 */
1037
1038unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf,
1039 unsigned int buflen)
1040{
1041 VPRINTK("ENTER\n");
1042 return 0;
1043}
1044
1045/**
1046 * ata_msense_push - Push data onto MODE SENSE data output buffer
1047 * @ptr_io: (input/output) Location to store more output data
1048 * @last: End of output data buffer
1049 * @buf: Pointer to BLOB being added to output buffer
1050 * @buflen: Length of BLOB
1051 *
1052 * Store MODE SENSE data on an output buffer.
1053 *
1054 * LOCKING:
1055 * None.
1056 */
1057
1058static void ata_msense_push(u8 **ptr_io, const u8 *last,
1059 const u8 *buf, unsigned int buflen)
1060{
1061 u8 *ptr = *ptr_io;
1062
1063 if ((ptr + buflen - 1) > last)
1064 return;
1065
1066 memcpy(ptr, buf, buflen);
1067
1068 ptr += buflen;
1069
1070 *ptr_io = ptr;
1071}
1072
1073/**
1074 * ata_msense_caching - Simulate MODE SENSE caching info page
1075 * @id: device IDENTIFY data
1076 * @ptr_io: (input/output) Location to store more output data
1077 * @last: End of output data buffer
1078 *
1079 * Generate a caching info page, which conditionally indicates
1080 * write caching to the SCSI layer, depending on device
1081 * capabilities.
1082 *
1083 * LOCKING:
1084 * None.
1085 */
1086
1087static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io,
1088 const u8 *last)
1089{
1090 u8 page[] = {
1091 0x8, /* page code */
1092 0x12, /* page length */
1093 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 10 zeroes */
1094 0, 0, 0, 0, 0, 0, 0, 0 /* 8 zeroes */
1095 };
1096
1097 if (ata_id_wcache_enabled(id))
1098 page[2] |= (1 << 2); /* write cache enable */
1099 if (!ata_id_rahead_enabled(id))
1100 page[12] |= (1 << 5); /* disable read ahead */
1101
1102 ata_msense_push(ptr_io, last, page, sizeof(page));
1103 return sizeof(page);
1104}
1105
1106/**
1107 * ata_msense_ctl_mode - Simulate MODE SENSE control mode page
1108 * @dev: Device associated with this MODE SENSE command
1109 * @ptr_io: (input/output) Location to store more output data
1110 * @last: End of output data buffer
1111 *
1112 * Generate a generic MODE SENSE control mode page.
1113 *
1114 * LOCKING:
1115 * None.
1116 */
1117
1118static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last)
1119{
1120 const u8 page[] = {0xa, 0xa, 6, 0, 0, 0, 0, 0, 0xff, 0xff, 0, 30};
1121
1122 /* byte 2: set the descriptor format sense data bit (bit 2)
1123 * since we need to support returning this format for SAT
1124 * commands and any SCSI commands against a 48b LBA device.
1125 */
1126
1127 ata_msense_push(ptr_io, last, page, sizeof(page));
1128 return sizeof(page);
1129}
1130
1131/**
1132 * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page
1133 * @dev: Device associated with this MODE SENSE command
1134 * @ptr_io: (input/output) Location to store more output data
1135 * @last: End of output data buffer
1136 *
1137 * Generate a generic MODE SENSE r/w error recovery page.
1138 *
1139 * LOCKING:
1140 * None.
1141 */
1142
1143static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last)
1144{
1145 const u8 page[] = {
1146 0x1, /* page code */
1147 0xa, /* page length */
1148 (1 << 7) | (1 << 6), /* note auto r/w reallocation */
1149 0, 0, 0, 0, 0, 0, 0, 0, 0 /* 9 zeroes */
1150 };
1151
1152 ata_msense_push(ptr_io, last, page, sizeof(page));
1153 return sizeof(page);
1154}
1155
1156/**
1157 * ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands
1158 * @args: device IDENTIFY data / SCSI command of interest.
1159 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
1160 * @buflen: Response buffer length.
1161 *
1162 * Simulate MODE SENSE commands.
1163 *
1164 * LOCKING:
1165 * spin_lock_irqsave(host_set lock)
1166 */
1167
1168unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf,
1169 unsigned int buflen)
1170{
1171 u8 *scsicmd = args->cmd->cmnd, *p, *last;
1172 unsigned int page_control, six_byte, output_len;
1173
1174 VPRINTK("ENTER\n");
1175
1176 six_byte = (scsicmd[0] == MODE_SENSE);
1177
1178 /* we only support saved and current values (which we treat
1179 * in the same manner)
1180 */
1181 page_control = scsicmd[2] >> 6;
1182 if ((page_control != 0) && (page_control != 3))
1183 return 1;
1184
1185 if (six_byte)
1186 output_len = 4;
1187 else
1188 output_len = 8;
1189
1190 p = rbuf + output_len;
1191 last = rbuf + buflen - 1;
1192
1193 switch(scsicmd[2] & 0x3f) {
1194 case 0x01: /* r/w error recovery */
1195 output_len += ata_msense_rw_recovery(&p, last);
1196 break;
1197
1198 case 0x08: /* caching */
1199 output_len += ata_msense_caching(args->id, &p, last);
1200 break;
1201
1202 case 0x0a: { /* control mode */
1203 output_len += ata_msense_ctl_mode(&p, last);
1204 break;
1205 }
1206
1207 case 0x3f: /* all pages */
1208 output_len += ata_msense_rw_recovery(&p, last);
1209 output_len += ata_msense_caching(args->id, &p, last);
1210 output_len += ata_msense_ctl_mode(&p, last);
1211 break;
1212
1213 default: /* invalid page code */
1214 return 1;
1215 }
1216
1217 if (six_byte) {
1218 output_len--;
1219 rbuf[0] = output_len;
1220 } else {
1221 output_len -= 2;
1222 rbuf[0] = output_len >> 8;
1223 rbuf[1] = output_len;
1224 }
1225
1226 return 0;
1227}
1228
1229/**
1230 * ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands
1231 * @args: device IDENTIFY data / SCSI command of interest.
1232 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
1233 * @buflen: Response buffer length.
1234 *
1235 * Simulate READ CAPACITY commands.
1236 *
1237 * LOCKING:
1238 * spin_lock_irqsave(host_set lock)
1239 */
1240
1241unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf,
1242 unsigned int buflen)
1243{
1244 u64 n_sectors;
1245 u32 tmp;
1246
1247 VPRINTK("ENTER\n");
1248
1249 if (ata_id_has_lba48(args->id))
1250 n_sectors = ata_id_u64(args->id, 100);
1251 else
1252 n_sectors = ata_id_u32(args->id, 60);
1253 n_sectors--; /* ATA TotalUserSectors - 1 */
1254
Linus Torvalds1da177e2005-04-16 15:20:36 -07001255 if (args->cmd->cmnd[0] == READ_CAPACITY) {
Philip Pokorny0c144d02005-05-28 01:24:47 -07001256 if( n_sectors >= 0xffffffffULL )
1257 tmp = 0xffffffff ; /* Return max count on overflow */
1258 else
1259 tmp = n_sectors ;
1260
Linus Torvalds1da177e2005-04-16 15:20:36 -07001261 /* sector count, 32-bit */
1262 rbuf[0] = tmp >> (8 * 3);
1263 rbuf[1] = tmp >> (8 * 2);
1264 rbuf[2] = tmp >> (8 * 1);
1265 rbuf[3] = tmp;
1266
1267 /* sector size */
1268 tmp = ATA_SECT_SIZE;
1269 rbuf[6] = tmp >> 8;
1270 rbuf[7] = tmp;
1271
1272 } else {
1273 /* sector count, 64-bit */
Philip Pokorny0c144d02005-05-28 01:24:47 -07001274 tmp = n_sectors >> (8 * 4);
1275 rbuf[2] = tmp >> (8 * 3);
1276 rbuf[3] = tmp >> (8 * 2);
1277 rbuf[4] = tmp >> (8 * 1);
1278 rbuf[5] = tmp;
1279 tmp = n_sectors;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001280 rbuf[6] = tmp >> (8 * 3);
1281 rbuf[7] = tmp >> (8 * 2);
1282 rbuf[8] = tmp >> (8 * 1);
1283 rbuf[9] = tmp;
1284
1285 /* sector size */
1286 tmp = ATA_SECT_SIZE;
1287 rbuf[12] = tmp >> 8;
1288 rbuf[13] = tmp;
1289 }
1290
1291 return 0;
1292}
1293
1294/**
1295 * ata_scsiop_report_luns - Simulate REPORT LUNS command
1296 * @args: device IDENTIFY data / SCSI command of interest.
1297 * @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
1298 * @buflen: Response buffer length.
1299 *
1300 * Simulate REPORT LUNS command.
1301 *
1302 * LOCKING:
1303 * spin_lock_irqsave(host_set lock)
1304 */
1305
1306unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf,
1307 unsigned int buflen)
1308{
1309 VPRINTK("ENTER\n");
1310 rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */
1311
1312 return 0;
1313}
1314
1315/**
1316 * ata_scsi_badcmd - End a SCSI request with an error
1317 * @cmd: SCSI request to be handled
1318 * @done: SCSI command completion function
1319 * @asc: SCSI-defined additional sense code
1320 * @ascq: SCSI-defined additional sense code qualifier
1321 *
1322 * Helper function that completes a SCSI command with
1323 * %SAM_STAT_CHECK_CONDITION, with a sense key %ILLEGAL_REQUEST
1324 * and the specified additional sense codes.
1325 *
1326 * LOCKING:
1327 * spin_lock_irqsave(host_set lock)
1328 */
1329
1330void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq)
1331{
1332 DPRINTK("ENTER\n");
1333 cmd->result = SAM_STAT_CHECK_CONDITION;
1334
1335 cmd->sense_buffer[0] = 0x70;
1336 cmd->sense_buffer[2] = ILLEGAL_REQUEST;
1337 cmd->sense_buffer[7] = 14 - 8; /* addnl. sense len. FIXME: correct? */
1338 cmd->sense_buffer[12] = asc;
1339 cmd->sense_buffer[13] = ascq;
1340
1341 done(cmd);
1342}
1343
1344static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
1345{
1346 struct scsi_cmnd *cmd = qc->scsicmd;
1347
1348 if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) {
1349 DPRINTK("request check condition\n");
1350
1351 cmd->result = SAM_STAT_CHECK_CONDITION;
1352
1353 qc->scsidone(cmd);
1354
1355 return 1;
1356 } else {
1357 u8 *scsicmd = cmd->cmnd;
1358
1359 if (scsicmd[0] == INQUIRY) {
1360 u8 *buf = NULL;
1361 unsigned int buflen;
1362
1363 buflen = ata_scsi_rbuf_get(cmd, &buf);
1364 buf[2] = 0x5;
1365 buf[3] = (buf[3] & 0xf0) | 2;
1366 ata_scsi_rbuf_put(cmd, buf);
1367 }
1368 cmd->result = SAM_STAT_GOOD;
1369 }
1370
1371 qc->scsidone(cmd);
1372
1373 return 0;
1374}
1375/**
1376 * atapi_xlat - Initialize PACKET taskfile
1377 * @qc: command structure to be initialized
1378 * @scsicmd: SCSI CDB associated with this PACKET command
1379 *
1380 * LOCKING:
1381 * spin_lock_irqsave(host_set lock)
1382 *
1383 * RETURNS:
1384 * Zero on success, non-zero on failure.
1385 */
1386
1387static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
1388{
1389 struct scsi_cmnd *cmd = qc->scsicmd;
1390 struct ata_device *dev = qc->dev;
1391 int using_pio = (dev->flags & ATA_DFLAG_PIO);
be7db052005-04-17 15:26:13 -05001392 int nodata = (cmd->sc_data_direction == DMA_NONE);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001393
1394 if (!using_pio)
1395 /* Check whether ATAPI DMA is safe */
1396 if (ata_check_atapi_dma(qc))
1397 using_pio = 1;
1398
1399 memcpy(&qc->cdb, scsicmd, qc->ap->cdb_len);
1400
1401 qc->complete_fn = atapi_qc_complete;
1402
1403 qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
be7db052005-04-17 15:26:13 -05001404 if (cmd->sc_data_direction == DMA_TO_DEVICE) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001405 qc->tf.flags |= ATA_TFLAG_WRITE;
1406 DPRINTK("direction: write\n");
1407 }
1408
1409 qc->tf.command = ATA_CMD_PACKET;
1410
1411 /* no data, or PIO data xfer */
1412 if (using_pio || nodata) {
1413 if (nodata)
1414 qc->tf.protocol = ATA_PROT_ATAPI_NODATA;
1415 else
1416 qc->tf.protocol = ATA_PROT_ATAPI;
1417 qc->tf.lbam = (8 * 1024) & 0xff;
1418 qc->tf.lbah = (8 * 1024) >> 8;
1419 }
1420
1421 /* DMA data xfer */
1422 else {
1423 qc->tf.protocol = ATA_PROT_ATAPI_DMA;
1424 qc->tf.feature |= ATAPI_PKT_DMA;
1425
1426#ifdef ATAPI_ENABLE_DMADIR
1427 /* some SATA bridges need us to indicate data xfer direction */
be7db052005-04-17 15:26:13 -05001428 if (cmd->sc_data_direction != DMA_TO_DEVICE)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001429 qc->tf.feature |= ATAPI_DMADIR;
1430#endif
1431 }
1432
1433 qc->nbytes = cmd->bufflen;
1434
1435 return 0;
1436}
1437
1438/**
1439 * ata_scsi_find_dev - lookup ata_device from scsi_cmnd
1440 * @ap: ATA port to which the device is attached
1441 * @scsidev: SCSI device from which we derive the ATA device
1442 *
1443 * Given various information provided in struct scsi_cmnd,
1444 * map that onto an ATA bus, and using that mapping
1445 * determine which ata_device is associated with the
1446 * SCSI command to be sent.
1447 *
1448 * LOCKING:
1449 * spin_lock_irqsave(host_set lock)
1450 *
1451 * RETURNS:
1452 * Associated ATA device, or %NULL if not found.
1453 */
1454
1455static struct ata_device *
1456ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev)
1457{
1458 struct ata_device *dev;
1459
1460 /* skip commands not addressed to targets we simulate */
1461 if (likely(scsidev->id < ATA_MAX_DEVICES))
1462 dev = &ap->device[scsidev->id];
1463 else
1464 return NULL;
1465
1466 if (unlikely((scsidev->channel != 0) ||
1467 (scsidev->lun != 0)))
1468 return NULL;
1469
1470 if (unlikely(!ata_dev_present(dev)))
1471 return NULL;
1472
Jeff Garzik6f106232005-08-30 21:52:18 -04001473 if (!atapi_enabled) {
Jeff Garzik1623c812005-08-30 03:37:42 -04001474 if (unlikely(dev->class == ATA_DEV_ATAPI))
1475 return NULL;
1476 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001477
1478 return dev;
1479}
1480
1481/**
1482 * ata_get_xlat_func - check if SCSI to ATA translation is possible
1483 * @dev: ATA device
1484 * @cmd: SCSI command opcode to consider
1485 *
1486 * Look up the SCSI command given, and determine whether the
1487 * SCSI command is to be translated or simulated.
1488 *
1489 * RETURNS:
1490 * Pointer to translation function if possible, %NULL if not.
1491 */
1492
1493static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
1494{
1495 switch (cmd) {
1496 case READ_6:
1497 case READ_10:
1498 case READ_16:
1499
1500 case WRITE_6:
1501 case WRITE_10:
1502 case WRITE_16:
1503 return ata_scsi_rw_xlat;
1504
1505 case SYNCHRONIZE_CACHE:
1506 if (ata_try_flush_cache(dev))
1507 return ata_scsi_flush_xlat;
1508 break;
1509
1510 case VERIFY:
1511 case VERIFY_16:
1512 return ata_scsi_verify_xlat;
Douglas Gilbert972dcaf2005-08-11 03:35:53 -04001513 case START_STOP:
1514 return ata_scsi_start_stop_xlat;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001515 }
1516
1517 return NULL;
1518}
1519
1520/**
1521 * ata_scsi_dump_cdb - dump SCSI command contents to dmesg
1522 * @ap: ATA port to which the command was being sent
1523 * @cmd: SCSI command to dump
1524 *
1525 * Prints the contents of a SCSI command via printk().
1526 */
1527
1528static inline void ata_scsi_dump_cdb(struct ata_port *ap,
1529 struct scsi_cmnd *cmd)
1530{
1531#ifdef ATA_DEBUG
1532 struct scsi_device *scsidev = cmd->device;
1533 u8 *scsicmd = cmd->cmnd;
1534
1535 DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
1536 ap->id,
1537 scsidev->channel, scsidev->id, scsidev->lun,
1538 scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3],
1539 scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7],
1540 scsicmd[8]);
1541#endif
1542}
1543
1544/**
1545 * ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device
1546 * @cmd: SCSI command to be sent
1547 * @done: Completion function, called when command is complete
1548 *
1549 * In some cases, this function translates SCSI commands into
1550 * ATA taskfiles, and queues the taskfiles to be sent to
1551 * hardware. In other cases, this function simulates a
1552 * SCSI device by evaluating and responding to certain
1553 * SCSI commands. This creates the overall effect of
1554 * ATA and ATAPI devices appearing as SCSI devices.
1555 *
1556 * LOCKING:
1557 * Releases scsi-layer-held lock, and obtains host_set lock.
1558 *
1559 * RETURNS:
1560 * Zero.
1561 */
1562
1563int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
1564{
1565 struct ata_port *ap;
1566 struct ata_device *dev;
1567 struct scsi_device *scsidev = cmd->device;
1568
1569 ap = (struct ata_port *) &scsidev->host->hostdata[0];
1570
1571 ata_scsi_dump_cdb(ap, cmd);
1572
1573 dev = ata_scsi_find_dev(ap, scsidev);
1574 if (unlikely(!dev)) {
1575 cmd->result = (DID_BAD_TARGET << 16);
1576 done(cmd);
1577 goto out_unlock;
1578 }
1579
1580 if (dev->class == ATA_DEV_ATA) {
1581 ata_xlat_func_t xlat_func = ata_get_xlat_func(dev,
1582 cmd->cmnd[0]);
1583
1584 if (xlat_func)
1585 ata_scsi_translate(ap, dev, cmd, done, xlat_func);
1586 else
1587 ata_scsi_simulate(dev->id, cmd, done);
1588 } else
1589 ata_scsi_translate(ap, dev, cmd, done, atapi_xlat);
1590
1591out_unlock:
1592 return 0;
1593}
1594
1595/**
1596 * ata_scsi_simulate - simulate SCSI command on ATA device
1597 * @id: current IDENTIFY data for target device.
1598 * @cmd: SCSI command being sent to device.
1599 * @done: SCSI command completion function.
1600 *
1601 * Interprets and directly executes a select list of SCSI commands
1602 * that can be handled internally.
1603 *
1604 * LOCKING:
1605 * spin_lock_irqsave(host_set lock)
1606 */
1607
1608void ata_scsi_simulate(u16 *id,
1609 struct scsi_cmnd *cmd,
1610 void (*done)(struct scsi_cmnd *))
1611{
1612 struct ata_scsi_args args;
1613 u8 *scsicmd = cmd->cmnd;
1614
1615 args.id = id;
1616 args.cmd = cmd;
1617 args.done = done;
1618
1619 switch(scsicmd[0]) {
1620 /* no-op's, complete with success */
1621 case SYNCHRONIZE_CACHE:
1622 case REZERO_UNIT:
1623 case SEEK_6:
1624 case SEEK_10:
1625 case TEST_UNIT_READY:
1626 case FORMAT_UNIT: /* FIXME: correct? */
1627 case SEND_DIAGNOSTIC: /* FIXME: correct? */
1628 ata_scsi_rbuf_fill(&args, ata_scsiop_noop);
1629 break;
1630
1631 case INQUIRY:
1632 if (scsicmd[1] & 2) /* is CmdDt set? */
1633 ata_bad_cdb(cmd, done);
1634 else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */
1635 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std);
1636 else if (scsicmd[2] == 0x00)
1637 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00);
1638 else if (scsicmd[2] == 0x80)
1639 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80);
1640 else if (scsicmd[2] == 0x83)
1641 ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83);
1642 else
1643 ata_bad_cdb(cmd, done);
1644 break;
1645
1646 case MODE_SENSE:
1647 case MODE_SENSE_10:
1648 ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense);
1649 break;
1650
1651 case MODE_SELECT: /* unconditionally return */
1652 case MODE_SELECT_10: /* bad-field-in-cdb */
1653 ata_bad_cdb(cmd, done);
1654 break;
1655
1656 case READ_CAPACITY:
1657 ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
1658 break;
1659
1660 case SERVICE_ACTION_IN:
1661 if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16)
1662 ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
1663 else
1664 ata_bad_cdb(cmd, done);
1665 break;
1666
1667 case REPORT_LUNS:
1668 ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns);
1669 break;
1670
1671 /* mandantory commands we haven't implemented yet */
1672 case REQUEST_SENSE:
1673
1674 /* all other commands */
1675 default:
1676 ata_bad_scsiop(cmd, done);
1677 break;
1678 }
1679}
1680