Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Device Tree file for NETGEAR ReadyNAS 104 |
| 3 | * |
| 4 | * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of the GNU General Public License |
| 8 | * as published by the Free Software Foundation; either version |
| 9 | * 2 of the License, or (at your option) any later version. |
| 10 | */ |
| 11 | |
| 12 | /dts-v1/; |
| 13 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 14 | #include <dt-bindings/input/input.h> |
Arnaud Ebalard | 100a5fa | 2013-11-22 00:00:12 +0100 | [diff] [blame] | 15 | #include <dt-bindings/gpio/gpio.h> |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 16 | #include "armada-370.dtsi" |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 17 | |
| 18 | / { |
| 19 | model = "NETGEAR ReadyNAS 104"; |
| 20 | compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp"; |
| 21 | |
| 22 | chosen { |
| 23 | bootargs = "console=ttyS0,115200 earlyprintk"; |
| 24 | }; |
| 25 | |
| 26 | memory { |
| 27 | device_type = "memory"; |
| 28 | reg = <0x00000000 0x20000000>; /* 512 MB */ |
| 29 | }; |
| 30 | |
| 31 | soc { |
| 32 | ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 |
| 33 | MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; |
| 34 | |
| 35 | pcie-controller { |
| 36 | status = "okay"; |
| 37 | |
| 38 | /* Connected to FL1009 USB 3.0 controller */ |
| 39 | pcie@1,0 { |
| 40 | /* Port 0, Lane 0 */ |
| 41 | status = "okay"; |
| 42 | }; |
| 43 | |
| 44 | /* Connected to Marvell 88SE9215 SATA controller */ |
| 45 | pcie@2,0 { |
| 46 | /* Port 1, Lane 0 */ |
| 47 | status = "okay"; |
| 48 | }; |
| 49 | }; |
| 50 | |
| 51 | internal-regs { |
| 52 | serial@12000 { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 53 | status = "okay"; |
| 54 | }; |
| 55 | |
| 56 | pinctrl { |
| 57 | poweroff: poweroff { |
| 58 | marvell,pins = "mpp60"; |
| 59 | marvell,function = "gpio"; |
| 60 | }; |
| 61 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 62 | backup_button_pin: backup-button-pin { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 63 | marvell,pins = "mpp52"; |
| 64 | marvell,function = "gpio"; |
| 65 | }; |
| 66 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 67 | power_button_pin: power-button-pin { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 68 | marvell,pins = "mpp62"; |
| 69 | marvell,function = "gpio"; |
| 70 | }; |
| 71 | |
| 72 | backup_led_pin: backup-led-pin { |
| 73 | marvell,pins = "mpp63"; |
| 74 | marvell,function = "gpo"; |
| 75 | }; |
| 76 | |
| 77 | power_led_pin: power-led-pin { |
| 78 | marvell,pins = "mpp64"; |
| 79 | marvell,function = "gpio"; |
| 80 | }; |
| 81 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 82 | reset_button_pin: reset-button-pin { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 83 | marvell,pins = "mpp65"; |
| 84 | marvell,function = "gpio"; |
| 85 | }; |
| 86 | }; |
| 87 | |
| 88 | mdio { |
Ezequiel Garcia | a1451ab | 2014-08-11 09:14:40 -0300 | [diff] [blame] | 89 | pinctrl-0 = <&mdio_pins>; |
| 90 | pinctrl-names = "default"; |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 91 | phy0: ethernet-phy@0 { /* Marvell 88E1318 */ |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 92 | reg = <0>; |
| 93 | }; |
| 94 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 95 | phy1: ethernet-phy@1 { /* Marvell 88E1318 */ |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 96 | reg = <1>; |
| 97 | }; |
| 98 | }; |
| 99 | |
| 100 | ethernet@70000 { |
Ezequiel Garcia | a1451ab | 2014-08-11 09:14:40 -0300 | [diff] [blame] | 101 | pinctrl-0 = <&ge0_rgmii_pins>; |
| 102 | pinctrl-names = "default"; |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 103 | status = "okay"; |
| 104 | phy = <&phy0>; |
| 105 | phy-mode = "rgmii-id"; |
| 106 | }; |
| 107 | |
| 108 | ethernet@74000 { |
Ezequiel Garcia | a1451ab | 2014-08-11 09:14:40 -0300 | [diff] [blame] | 109 | pinctrl-0 = <&ge1_rgmii_pins>; |
| 110 | pinctrl-names = "default"; |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 111 | status = "okay"; |
| 112 | phy = <&phy1>; |
| 113 | phy-mode = "rgmii-id"; |
| 114 | }; |
| 115 | |
| 116 | usb@50000 { |
| 117 | status = "okay"; |
| 118 | }; |
| 119 | |
| 120 | i2c@11000 { |
| 121 | compatible = "marvell,mv64xxx-i2c"; |
| 122 | clock-frequency = <100000>; |
| 123 | status = "okay"; |
| 124 | |
Arnaud Ebalard | c0d1c26 | 2013-12-19 23:02:15 +0100 | [diff] [blame] | 125 | isl12057: isl12057@68 { |
Philipp Zabel | 7a6540c | 2014-09-08 11:19:18 +0200 | [diff] [blame] | 126 | compatible = "isil,isl12057"; |
Arnaud Ebalard | c0d1c26 | 2013-12-19 23:02:15 +0100 | [diff] [blame] | 127 | reg = <0x68>; |
| 128 | }; |
| 129 | |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 130 | g762: g762@3e { |
| 131 | compatible = "gmt,g762"; |
| 132 | reg = <0x3e>; |
| 133 | clocks = <&g762_clk>; /* input clock */ |
| 134 | fan_gear_mode = <0>; |
| 135 | fan_startv = <1>; |
| 136 | pwm_polarity = <0>; |
| 137 | }; |
Arnaud Ebalard | 100a5fa | 2013-11-22 00:00:12 +0100 | [diff] [blame] | 138 | |
| 139 | pca9554: pca9554@23 { |
| 140 | compatible = "nxp,pca9554"; |
| 141 | gpio-controller; |
| 142 | #gpio-cells = <2>; |
| 143 | reg = <0x23>; |
| 144 | }; |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 145 | }; |
Arnaud Ebalard | 0373a55 | 2013-12-07 00:13:18 +0100 | [diff] [blame] | 146 | |
| 147 | nand@d0000 { |
| 148 | status = "okay"; |
| 149 | num-cs = <1>; |
| 150 | marvell,nand-keep-config; |
| 151 | marvell,nand-enable-arbiter; |
| 152 | nand-on-flash-bbt; |
| 153 | |
Arnaud Ebalard | 225b94c | 2014-09-06 22:49:25 +0200 | [diff] [blame] | 154 | /* Use Hardware BCH ECC */ |
| 155 | nand-ecc-strength = <4>; |
| 156 | nand-ecc-step-size = <512>; |
| 157 | |
Arnaud Ebalard | 0373a55 | 2013-12-07 00:13:18 +0100 | [diff] [blame] | 158 | partition@0 { |
| 159 | label = "u-boot"; |
| 160 | reg = <0x0000000 0x180000>; /* 1.5MB */ |
| 161 | read-only; |
| 162 | }; |
| 163 | |
| 164 | partition@180000 { |
| 165 | label = "u-boot-env"; |
| 166 | reg = <0x180000 0x20000>; /* 128KB */ |
| 167 | read-only; |
| 168 | }; |
| 169 | |
| 170 | partition@200000 { |
| 171 | label = "uImage"; |
| 172 | reg = <0x0200000 0x600000>; /* 6MB */ |
| 173 | }; |
| 174 | |
| 175 | partition@800000 { |
| 176 | label = "minirootfs"; |
| 177 | reg = <0x0800000 0x400000>; /* 4MB */ |
| 178 | }; |
| 179 | |
| 180 | /* Last MB is for the BBT, i.e. not writable */ |
| 181 | partition@c00000 { |
| 182 | label = "ubifs"; |
| 183 | reg = <0x0c00000 0x7400000>; /* 116MB */ |
| 184 | }; |
| 185 | }; |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 186 | }; |
| 187 | }; |
| 188 | |
| 189 | clocks { |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 190 | g762_clk: g762-oscillator { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 191 | compatible = "fixed-clock"; |
| 192 | #clock-cells = <0>; |
| 193 | clock-frequency = <8192>; |
| 194 | }; |
| 195 | }; |
| 196 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 197 | gpio-leds { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 198 | compatible = "gpio-leds"; |
| 199 | pinctrl-0 = <&backup_led_pin &power_led_pin>; |
| 200 | pinctrl-names = "default"; |
| 201 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 202 | blue-backup-led { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 203 | label = "rn104:blue:backup"; |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 204 | gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 205 | default-state = "off"; |
| 206 | }; |
| 207 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 208 | blue-power-led { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 209 | label = "rn104:blue:pwr"; |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 210 | gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 211 | linux,default-trigger = "keep"; |
| 212 | }; |
Arnaud Ebalard | 100a5fa | 2013-11-22 00:00:12 +0100 | [diff] [blame] | 213 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 214 | blue-sata1-led { |
Arnaud Ebalard | 100a5fa | 2013-11-22 00:00:12 +0100 | [diff] [blame] | 215 | label = "rn104:blue:sata1"; |
| 216 | gpios = <&pca9554 0 GPIO_ACTIVE_LOW>; |
| 217 | default-state = "off"; |
| 218 | }; |
| 219 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 220 | blue-sata2-led { |
Arnaud Ebalard | 100a5fa | 2013-11-22 00:00:12 +0100 | [diff] [blame] | 221 | label = "rn104:blue:sata2"; |
| 222 | gpios = <&pca9554 1 GPIO_ACTIVE_LOW>; |
| 223 | default-state = "off"; |
| 224 | }; |
| 225 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 226 | blue-sata3-led { |
Arnaud Ebalard | 100a5fa | 2013-11-22 00:00:12 +0100 | [diff] [blame] | 227 | label = "rn104:blue:sata3"; |
| 228 | gpios = <&pca9554 2 GPIO_ACTIVE_LOW>; |
| 229 | default-state = "off"; |
| 230 | }; |
| 231 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 232 | blue-sata4-led { |
Arnaud Ebalard | 100a5fa | 2013-11-22 00:00:12 +0100 | [diff] [blame] | 233 | label = "rn104:blue:sata4"; |
| 234 | gpios = <&pca9554 3 GPIO_ACTIVE_LOW>; |
| 235 | default-state = "off"; |
| 236 | }; |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 237 | }; |
| 238 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 239 | gpio-keys { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 240 | compatible = "gpio-keys"; |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 241 | pinctrl-0 = <&backup_button_pin |
| 242 | &power_button_pin |
| 243 | &reset_button_pin>; |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 244 | pinctrl-names = "default"; |
| 245 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 246 | backup-button { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 247 | label = "Backup Button"; |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 248 | linux,code = <KEY_COPY>; |
| 249 | gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 250 | }; |
| 251 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 252 | power-button { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 253 | label = "Power Button"; |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 254 | linux,code = <KEY_POWER>; |
| 255 | gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 256 | }; |
| 257 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 258 | reset-button { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 259 | label = "Reset Button"; |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 260 | linux,code = <KEY_RESTART>; |
| 261 | gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 262 | }; |
| 263 | }; |
| 264 | |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 265 | gpio-poweroff { |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 266 | compatible = "gpio-poweroff"; |
| 267 | pinctrl-0 = <&poweroff>; |
| 268 | pinctrl-names = "default"; |
Arnaud Ebalard | 96b09e3 | 2013-11-29 21:27:48 +0100 | [diff] [blame] | 269 | gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; |
Arnaud Ebalard | 45e8815 | 2013-10-22 20:56:13 +0200 | [diff] [blame] | 270 | }; |
| 271 | }; |