blob: ea288f0a1d3905a51493505f41c5c261ad55f3e4 [file] [log] [blame]
Anders Berg8cee8af2014-05-23 11:08:36 +02001/*
2 * arch/arm/boot/dts/axm55xx.dtsi
3 *
4 * Copyright (C) 2013 LSI
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 */
11
12#include <dt-bindings/interrupt-controller/arm-gic.h>
13#include <dt-bindings/clock/lsi,axm5516-clks.h>
14
15#include "skeleton64.dtsi"
16
17/ {
18 interrupt-parent = <&gic>;
19
20 aliases {
21 serial0 = &serial0;
22 serial1 = &serial1;
23 serial2 = &serial2;
24 serial3 = &serial3;
25 timer = &timer0;
26 };
27
28 clocks {
29 compatible = "simple-bus";
30 #address-cells = <2>;
31 #size-cells = <2>;
32 ranges;
33
34 clk_ref0: clk_ref0 {
35 compatible = "fixed-clock";
36 #clock-cells = <0>;
37 clock-frequency = <125000000>;
38 };
39
40 clk_ref1: clk_ref1 {
41 compatible = "fixed-clock";
42 #clock-cells = <0>;
43 clock-frequency = <125000000>;
44 };
45
46 clk_ref2: clk_ref2 {
47 compatible = "fixed-clock";
48 #clock-cells = <0>;
49 clock-frequency = <125000000>;
50 };
51
52 clks: clock-controller@2010020000 {
53 compatible = "lsi,axm5516-clks";
54 #clock-cells = <1>;
55 reg = <0x20 0x10020000 0 0x20000>;
56 };
57 };
58
59 gic: interrupt-controller@2001001000 {
60 compatible = "arm,cortex-a15-gic";
61 #interrupt-cells = <3>;
62 #address-cells = <0>;
63 interrupt-controller;
64 reg = <0x20 0x01001000 0 0x1000>,
65 <0x20 0x01002000 0 0x1000>,
66 <0x20 0x01004000 0 0x2000>,
67 <0x20 0x01006000 0 0x2000>;
68 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
69 IRQ_TYPE_LEVEL_HIGH)>;
70 };
71
72 timer {
73 compatible = "arm,armv7-timer";
74 interrupts =
75 <GIC_PPI 13
76 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
77 <GIC_PPI 14
78 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
79 <GIC_PPI 11
80 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
81 <GIC_PPI 10
82 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
83 };
84
85
86 pmu {
87 compatible = "arm,cortex-a15-pmu";
88 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
89 };
90
91 soc {
92 compatible = "simple-bus";
93 device_type = "soc";
94 #address-cells = <2>;
95 #size-cells = <2>;
96 interrupt-parent = <&gic>;
97 ranges;
98
99 syscon: syscon@2010030000 {
100 compatible = "lsi,axxia-syscon", "syscon";
101 reg = <0x20 0x10030000 0 0x2000>;
102 };
103
Anders Berg61d45492014-05-23 11:08:39 +0200104 reset: reset@2010031000 {
105 compatible = "lsi,axm55xx-reset";
106 syscon = <&syscon>;
107 };
108
Anders Berg8cee8af2014-05-23 11:08:36 +0200109 amba {
110 compatible = "arm,amba-bus";
111 #address-cells = <2>;
112 #size-cells = <2>;
113 ranges;
114
115 serial0: uart@2010080000 {
116 compatible = "arm,pl011", "arm,primecell";
117 reg = <0x20 0x10080000 0 0x1000>;
118 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
119 clocks = <&clks AXXIA_CLK_PER>;
120 clock-names = "apb_pclk";
121 status = "disabled";
122 };
123
124 serial1: uart@2010081000 {
125 compatible = "arm,pl011", "arm,primecell";
126 reg = <0x20 0x10081000 0 0x1000>;
127 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
128 clocks = <&clks AXXIA_CLK_PER>;
129 clock-names = "apb_pclk";
130 status = "disabled";
131 };
132
133 serial2: uart@2010082000 {
134 compatible = "arm,pl011", "arm,primecell";
135 reg = <0x20 0x10082000 0 0x1000>;
136 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
137 clocks = <&clks AXXIA_CLK_PER>;
138 clock-names = "apb_pclk";
139 status = "disabled";
140 };
141
142 serial3: uart@2010083000 {
143 compatible = "arm,pl011", "arm,primecell";
144 reg = <0x20 0x10083000 0 0x1000>;
145 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
146 clocks = <&clks AXXIA_CLK_PER>;
147 clock-names = "apb_pclk";
148 status = "disabled";
149 };
150
151 timer0: timer@2010091000 {
152 compatible = "arm,sp804", "arm,primecell";
153 reg = <0x20 0x10091000 0 0x1000>;
154 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
155 <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
156 <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
157 <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
158 <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
159 <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
160 <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
161 <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
162 <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
163 clocks = <&clks AXXIA_CLK_PER>;
164 clock-names = "apb_pclk";
165 status = "okay";
166 };
167
168 gpio0: gpio@2010092000 {
169 #gpio-cells = <2>;
170 compatible = "arm,pl061", "arm,primecell";
171 gpio-controller;
172 reg = <0x20 0x10092000 0x00 0x1000>;
173 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
174 <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
175 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
176 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
177 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
178 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
179 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
180 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
181 clocks = <&clks AXXIA_CLK_PER>;
182 clock-names = "apb_pclk";
183 status = "disabled";
184 };
185
186 gpio1: gpio@2010093000 {
187 #gpio-cells = <2>;
188 compatible = "arm,pl061", "arm,primecell";
189 gpio-controller;
190 reg = <0x20 0x10093000 0x00 0x1000>;
191 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
192 clocks = <&clks AXXIA_CLK_PER>;
193 clock-names = "apb_pclk";
194 status = "disabled";
195 };
196 };
197 };
198};
199
200/*
201 Local Variables:
202 mode: C
203 End:
204*/