Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2013 Gateworks Corporation |
| 3 | * |
| 4 | * The code contained herein is licensed under the GNU General Public |
| 5 | * License. You may obtain a copy of the GNU General Public License |
| 6 | * Version 2 or later at the following locations: |
| 7 | * |
| 8 | * http://www.opensource.org/licenses/gpl-license.html |
| 9 | * http://www.gnu.org/copyleft/gpl.html |
| 10 | */ |
| 11 | |
Tim Harvey | 326cdb1 | 2014-09-08 23:07:28 -0700 | [diff] [blame] | 12 | #include <dt-bindings/gpio/gpio.h> |
| 13 | |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 14 | / { |
| 15 | /* these are used by bootloader for disabling nodes */ |
| 16 | aliases { |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 17 | ethernet1 = ð1; |
| 18 | led0 = &led0; |
| 19 | led1 = &led1; |
| 20 | led2 = &led2; |
| 21 | nand = &gpmi; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 22 | ssi0 = &ssi1; |
| 23 | usb0 = &usbh1; |
| 24 | usb1 = &usbotg; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 25 | }; |
| 26 | |
| 27 | chosen { |
| 28 | bootargs = "console=ttymxc1,115200"; |
| 29 | }; |
| 30 | |
Tim Harvey | b325324 | 2014-04-30 23:32:30 -0700 | [diff] [blame] | 31 | backlight { |
| 32 | compatible = "pwm-backlight"; |
| 33 | pwms = <&pwm4 0 5000000>; |
| 34 | brightness-levels = <0 4 8 16 32 64 128 255>; |
| 35 | default-brightness-level = <7>; |
| 36 | }; |
| 37 | |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 38 | leds { |
| 39 | compatible = "gpio-leds"; |
Tim Harvey | b5f37b7 | 2014-09-08 23:07:30 -0700 | [diff] [blame] | 40 | pinctrl-names = "default"; |
| 41 | pinctrl-0 = <&pinctrl_gpio_leds>; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 42 | |
| 43 | led0: user1 { |
| 44 | label = "user1"; |
Tim Harvey | 326cdb1 | 2014-09-08 23:07:28 -0700 | [diff] [blame] | 45 | gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 46 | default-state = "on"; |
| 47 | linux,default-trigger = "heartbeat"; |
| 48 | }; |
| 49 | |
| 50 | led1: user2 { |
| 51 | label = "user2"; |
Tim Harvey | 326cdb1 | 2014-09-08 23:07:28 -0700 | [diff] [blame] | 52 | gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 53 | default-state = "off"; |
| 54 | }; |
| 55 | |
| 56 | led2: user3 { |
| 57 | label = "user3"; |
Tim Harvey | 326cdb1 | 2014-09-08 23:07:28 -0700 | [diff] [blame] | 58 | gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 59 | default-state = "off"; |
| 60 | }; |
| 61 | }; |
| 62 | |
| 63 | memory { |
| 64 | reg = <0x10000000 0x40000000>; |
| 65 | }; |
| 66 | |
| 67 | pps { |
| 68 | compatible = "pps-gpio"; |
Tim Harvey | b5f37b7 | 2014-09-08 23:07:30 -0700 | [diff] [blame] | 69 | pinctrl-names = "default"; |
| 70 | pinctrl-0 = <&pinctrl_pps>; |
Tim Harvey | 326cdb1 | 2014-09-08 23:07:28 -0700 | [diff] [blame] | 71 | gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 72 | status = "okay"; |
| 73 | }; |
| 74 | |
| 75 | regulators { |
| 76 | compatible = "simple-bus"; |
| 77 | #address-cells = <1>; |
| 78 | #size-cells = <0>; |
| 79 | |
| 80 | reg_1p0v: regulator@0 { |
| 81 | compatible = "regulator-fixed"; |
| 82 | reg = <0>; |
| 83 | regulator-name = "1P0V"; |
| 84 | regulator-min-microvolt = <1000000>; |
| 85 | regulator-max-microvolt = <1000000>; |
| 86 | regulator-always-on; |
| 87 | }; |
| 88 | |
| 89 | reg_3p3v: regulator@1 { |
| 90 | compatible = "regulator-fixed"; |
| 91 | reg = <1>; |
| 92 | regulator-name = "3P3V"; |
| 93 | regulator-min-microvolt = <3300000>; |
| 94 | regulator-max-microvolt = <3300000>; |
| 95 | regulator-always-on; |
| 96 | }; |
| 97 | |
| 98 | reg_usb_h1_vbus: regulator@2 { |
| 99 | compatible = "regulator-fixed"; |
| 100 | reg = <2>; |
| 101 | regulator-name = "usb_h1_vbus"; |
| 102 | regulator-min-microvolt = <5000000>; |
| 103 | regulator-max-microvolt = <5000000>; |
| 104 | regulator-always-on; |
| 105 | }; |
| 106 | |
| 107 | reg_usb_otg_vbus: regulator@3 { |
| 108 | compatible = "regulator-fixed"; |
| 109 | reg = <3>; |
| 110 | regulator-name = "usb_otg_vbus"; |
| 111 | regulator-min-microvolt = <5000000>; |
| 112 | regulator-max-microvolt = <5000000>; |
Tim Harvey | 326cdb1 | 2014-09-08 23:07:28 -0700 | [diff] [blame] | 113 | gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 114 | enable-active-high; |
| 115 | }; |
| 116 | }; |
| 117 | |
| 118 | sound { |
Tim Harvey | b12d1e9 | 2014-05-21 23:04:54 -0700 | [diff] [blame] | 119 | compatible = "fsl,imx6q-ventana-sgtl5000", |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 120 | "fsl,imx-audio-sgtl5000"; |
Tim Harvey | b12d1e9 | 2014-05-21 23:04:54 -0700 | [diff] [blame] | 121 | model = "sgtl5000-audio"; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 122 | ssi-controller = <&ssi1>; |
| 123 | audio-codec = <&codec>; |
| 124 | audio-routing = |
| 125 | "MIC_IN", "Mic Jack", |
| 126 | "Mic Jack", "Mic Bias", |
| 127 | "Headphone Jack", "HP_OUT"; |
| 128 | mux-int-port = <1>; |
| 129 | mux-ext-port = <4>; |
| 130 | }; |
| 131 | }; |
| 132 | |
| 133 | &audmux { |
| 134 | pinctrl-names = "default"; |
| 135 | pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */ |
| 136 | status = "okay"; |
| 137 | }; |
| 138 | |
| 139 | &can1 { |
| 140 | pinctrl-names = "default"; |
| 141 | pinctrl-0 = <&pinctrl_flexcan1>; |
| 142 | status = "okay"; |
| 143 | }; |
| 144 | |
| 145 | &fec { |
| 146 | pinctrl-names = "default"; |
| 147 | pinctrl-0 = <&pinctrl_enet>; |
| 148 | phy-mode = "rgmii"; |
Tim Harvey | 326cdb1 | 2014-09-08 23:07:28 -0700 | [diff] [blame] | 149 | phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 150 | status = "okay"; |
| 151 | }; |
| 152 | |
| 153 | &gpmi { |
| 154 | pinctrl-names = "default"; |
| 155 | pinctrl-0 = <&pinctrl_gpmi_nand>; |
| 156 | status = "okay"; |
| 157 | }; |
| 158 | |
Tim Harvey | aef15db | 2014-04-23 00:47:51 -0700 | [diff] [blame] | 159 | &hdmi { |
| 160 | ddc-i2c-bus = <&i2c3>; |
| 161 | status = "okay"; |
| 162 | }; |
| 163 | |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 164 | &i2c1 { |
| 165 | clock-frequency = <100000>; |
| 166 | pinctrl-names = "default"; |
| 167 | pinctrl-0 = <&pinctrl_i2c1>; |
| 168 | status = "okay"; |
| 169 | |
| 170 | eeprom1: eeprom@50 { |
| 171 | compatible = "atmel,24c02"; |
| 172 | reg = <0x50>; |
| 173 | pagesize = <16>; |
| 174 | }; |
| 175 | |
| 176 | eeprom2: eeprom@51 { |
| 177 | compatible = "atmel,24c02"; |
| 178 | reg = <0x51>; |
| 179 | pagesize = <16>; |
| 180 | }; |
| 181 | |
| 182 | eeprom3: eeprom@52 { |
| 183 | compatible = "atmel,24c02"; |
| 184 | reg = <0x52>; |
| 185 | pagesize = <16>; |
| 186 | }; |
| 187 | |
| 188 | eeprom4: eeprom@53 { |
| 189 | compatible = "atmel,24c02"; |
| 190 | reg = <0x53>; |
| 191 | pagesize = <16>; |
| 192 | }; |
| 193 | |
| 194 | gpio: pca9555@23 { |
| 195 | compatible = "nxp,pca9555"; |
| 196 | reg = <0x23>; |
| 197 | gpio-controller; |
| 198 | #gpio-cells = <2>; |
| 199 | }; |
| 200 | |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 201 | rtc: ds1672@68 { |
| 202 | compatible = "dallas,ds1672"; |
| 203 | reg = <0x68>; |
| 204 | }; |
| 205 | }; |
| 206 | |
| 207 | &i2c2 { |
| 208 | clock-frequency = <100000>; |
| 209 | pinctrl-names = "default"; |
| 210 | pinctrl-0 = <&pinctrl_i2c2>; |
| 211 | status = "okay"; |
| 212 | |
| 213 | pmic: pfuze100@08 { |
| 214 | compatible = "fsl,pfuze100"; |
| 215 | reg = <0x08>; |
| 216 | |
| 217 | regulators { |
| 218 | sw1a_reg: sw1ab { |
| 219 | regulator-min-microvolt = <300000>; |
| 220 | regulator-max-microvolt = <1875000>; |
| 221 | regulator-boot-on; |
| 222 | regulator-always-on; |
| 223 | regulator-ramp-delay = <6250>; |
| 224 | }; |
| 225 | |
| 226 | sw1c_reg: sw1c { |
| 227 | regulator-min-microvolt = <300000>; |
| 228 | regulator-max-microvolt = <1875000>; |
| 229 | regulator-boot-on; |
| 230 | regulator-always-on; |
| 231 | regulator-ramp-delay = <6250>; |
| 232 | }; |
| 233 | |
| 234 | sw2_reg: sw2 { |
| 235 | regulator-min-microvolt = <800000>; |
| 236 | regulator-max-microvolt = <3950000>; |
| 237 | regulator-boot-on; |
| 238 | regulator-always-on; |
| 239 | }; |
| 240 | |
| 241 | sw3a_reg: sw3a { |
| 242 | regulator-min-microvolt = <400000>; |
| 243 | regulator-max-microvolt = <1975000>; |
| 244 | regulator-boot-on; |
| 245 | regulator-always-on; |
| 246 | }; |
| 247 | |
| 248 | sw3b_reg: sw3b { |
| 249 | regulator-min-microvolt = <400000>; |
| 250 | regulator-max-microvolt = <1975000>; |
| 251 | regulator-boot-on; |
| 252 | regulator-always-on; |
| 253 | }; |
| 254 | |
| 255 | sw4_reg: sw4 { |
| 256 | regulator-min-microvolt = <800000>; |
| 257 | regulator-max-microvolt = <3300000>; |
| 258 | }; |
| 259 | |
| 260 | swbst_reg: swbst { |
| 261 | regulator-min-microvolt = <5000000>; |
| 262 | regulator-max-microvolt = <5150000>; |
| 263 | }; |
| 264 | |
| 265 | snvs_reg: vsnvs { |
| 266 | regulator-min-microvolt = <1000000>; |
| 267 | regulator-max-microvolt = <3000000>; |
| 268 | regulator-boot-on; |
| 269 | regulator-always-on; |
| 270 | }; |
| 271 | |
| 272 | vref_reg: vrefddr { |
| 273 | regulator-boot-on; |
| 274 | regulator-always-on; |
| 275 | }; |
| 276 | |
| 277 | vgen1_reg: vgen1 { |
| 278 | regulator-min-microvolt = <800000>; |
| 279 | regulator-max-microvolt = <1550000>; |
| 280 | }; |
| 281 | |
| 282 | vgen2_reg: vgen2 { |
| 283 | regulator-min-microvolt = <800000>; |
| 284 | regulator-max-microvolt = <1550000>; |
| 285 | }; |
| 286 | |
| 287 | vgen3_reg: vgen3 { |
| 288 | regulator-min-microvolt = <1800000>; |
| 289 | regulator-max-microvolt = <3300000>; |
| 290 | }; |
| 291 | |
| 292 | vgen4_reg: vgen4 { |
| 293 | regulator-min-microvolt = <1800000>; |
| 294 | regulator-max-microvolt = <3300000>; |
| 295 | regulator-always-on; |
| 296 | }; |
| 297 | |
| 298 | vgen5_reg: vgen5 { |
| 299 | regulator-min-microvolt = <1800000>; |
| 300 | regulator-max-microvolt = <3300000>; |
| 301 | regulator-always-on; |
| 302 | }; |
| 303 | |
| 304 | vgen6_reg: vgen6 { |
| 305 | regulator-min-microvolt = <1800000>; |
| 306 | regulator-max-microvolt = <3300000>; |
| 307 | regulator-always-on; |
| 308 | }; |
| 309 | }; |
| 310 | }; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 311 | }; |
| 312 | |
| 313 | &i2c3 { |
| 314 | clock-frequency = <100000>; |
| 315 | pinctrl-names = "default"; |
| 316 | pinctrl-0 = <&pinctrl_i2c3>; |
| 317 | status = "okay"; |
| 318 | |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 319 | codec: sgtl5000@0a { |
| 320 | compatible = "fsl,sgtl5000"; |
| 321 | reg = <0x0a>; |
| 322 | clocks = <&clks 201>; |
| 323 | VDDA-supply = <&sw4_reg>; |
| 324 | VDDIO-supply = <®_3p3v>; |
| 325 | }; |
| 326 | |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 327 | touchscreen: egalax_ts@04 { |
| 328 | compatible = "eeti,egalax_ts"; |
| 329 | reg = <0x04>; |
| 330 | interrupt-parent = <&gpio7>; |
Tim Harvey | 326cdb1 | 2014-09-08 23:07:28 -0700 | [diff] [blame] | 331 | interrupts = <12 2>; |
| 332 | wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 333 | }; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 334 | }; |
| 335 | |
Tim Harvey | b5f37b7 | 2014-09-08 23:07:30 -0700 | [diff] [blame] | 336 | &ldb { |
| 337 | status = "okay"; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 338 | |
Tim Harvey | b5f37b7 | 2014-09-08 23:07:30 -0700 | [diff] [blame] | 339 | lvds-channel@1 { |
| 340 | fsl,data-mapping = "spwg"; |
| 341 | fsl,data-width = <18>; |
| 342 | status = "okay"; |
| 343 | |
| 344 | display-timings { |
| 345 | native-mode = <&timing0>; |
| 346 | timing0: hsd100pxn1 { |
| 347 | clock-frequency = <65000000>; |
| 348 | hactive = <1024>; |
| 349 | vactive = <768>; |
| 350 | hback-porch = <220>; |
| 351 | hfront-porch = <40>; |
| 352 | vback-porch = <21>; |
| 353 | vfront-porch = <7>; |
| 354 | hsync-len = <60>; |
| 355 | vsync-len = <10>; |
| 356 | }; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 357 | }; |
Tim Harvey | b5f37b7 | 2014-09-08 23:07:30 -0700 | [diff] [blame] | 358 | }; |
| 359 | }; |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 360 | |
Tim Harvey | b5f37b7 | 2014-09-08 23:07:30 -0700 | [diff] [blame] | 361 | &pcie { |
| 362 | pinctrl-names = "default"; |
| 363 | pinctrl-0 = <&pinctrl_pcie>; |
| 364 | reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; |
| 365 | status = "okay"; |
| 366 | |
| 367 | eth1: sky2@8 { /* MAC/PHY on bus 8 */ |
| 368 | compatible = "marvell,sky2"; |
| 369 | }; |
| 370 | }; |
| 371 | |
| 372 | &pwm4 { |
| 373 | pinctrl-names = "default"; |
| 374 | pinctrl-0 = <&pinctrl_pwm4>; |
| 375 | status = "okay"; |
| 376 | }; |
| 377 | |
| 378 | &ssi1 { |
| 379 | fsl,mode = "i2s-slave"; |
| 380 | status = "okay"; |
| 381 | }; |
| 382 | |
| 383 | &ssi2 { |
| 384 | fsl,mode = "i2s-slave"; |
| 385 | status = "okay"; |
| 386 | }; |
| 387 | |
| 388 | &uart1 { |
| 389 | pinctrl-names = "default"; |
| 390 | pinctrl-0 = <&pinctrl_uart1>; |
| 391 | status = "okay"; |
| 392 | }; |
| 393 | |
| 394 | &uart2 { |
| 395 | pinctrl-names = "default"; |
| 396 | pinctrl-0 = <&pinctrl_uart2>; |
| 397 | status = "okay"; |
| 398 | }; |
| 399 | |
| 400 | &uart5 { |
| 401 | pinctrl-names = "default"; |
| 402 | pinctrl-0 = <&pinctrl_uart5>; |
| 403 | status = "okay"; |
| 404 | }; |
| 405 | |
| 406 | &usbotg { |
| 407 | vbus-supply = <®_usb_otg_vbus>; |
| 408 | pinctrl-names = "default"; |
| 409 | pinctrl-0 = <&pinctrl_usbotg>; |
| 410 | disable-over-current; |
| 411 | status = "okay"; |
| 412 | }; |
| 413 | |
| 414 | &usbh1 { |
| 415 | vbus-supply = <®_usb_h1_vbus>; |
| 416 | status = "okay"; |
| 417 | }; |
| 418 | |
| 419 | &usdhc3 { |
| 420 | pinctrl-names = "default"; |
| 421 | pinctrl-0 = <&pinctrl_usdhc3>; |
| 422 | cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; |
| 423 | vmmc-supply = <®_3p3v>; |
| 424 | status = "okay"; |
| 425 | }; |
| 426 | |
| 427 | &iomuxc { |
| 428 | imx6qdl-gw54xx { |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 429 | pinctrl_audmux: audmuxgrp { |
| 430 | fsl,pins = < |
| 431 | MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 |
| 432 | MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 |
| 433 | MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 |
| 434 | MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 |
Tim Harvey | b5f37b7 | 2014-09-08 23:07:30 -0700 | [diff] [blame] | 435 | MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 436 | >; |
| 437 | }; |
| 438 | |
| 439 | pinctrl_enet: enetgrp { |
| 440 | fsl,pins = < |
| 441 | MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 |
| 442 | MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 |
| 443 | MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 |
| 444 | MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 |
| 445 | MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 |
| 446 | MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 |
| 447 | MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 |
| 448 | MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 |
| 449 | MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 |
| 450 | MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 |
| 451 | MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 |
| 452 | MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 |
| 453 | MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 |
| 454 | MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| 455 | MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| 456 | MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 |
| 457 | >; |
| 458 | }; |
| 459 | |
| 460 | pinctrl_flexcan1: flexcan1grp { |
| 461 | fsl,pins = < |
Tim Harvey | 73e005c | 2014-09-08 23:07:29 -0700 | [diff] [blame] | 462 | MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 |
| 463 | MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 |
Tim Harvey | b5f37b7 | 2014-09-08 23:07:30 -0700 | [diff] [blame] | 464 | MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ |
| 465 | >; |
| 466 | }; |
| 467 | |
| 468 | pinctrl_gpio_leds: gpioledsgrp { |
| 469 | fsl,pins = < |
| 470 | MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 |
| 471 | MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 |
| 472 | MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 473 | >; |
| 474 | }; |
| 475 | |
| 476 | pinctrl_gpmi_nand: gpminandgrp { |
| 477 | fsl,pins = < |
| 478 | MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 |
| 479 | MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 |
| 480 | MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 |
| 481 | MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 |
| 482 | MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 |
| 483 | MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 |
| 484 | MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 |
| 485 | MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 |
| 486 | MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 |
| 487 | MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 |
| 488 | MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 |
| 489 | MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 |
| 490 | MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 |
| 491 | MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 |
| 492 | MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 |
| 493 | MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 |
| 494 | >; |
| 495 | }; |
| 496 | |
| 497 | pinctrl_i2c1: i2c1grp { |
| 498 | fsl,pins = < |
| 499 | MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 |
| 500 | MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 |
| 501 | >; |
| 502 | }; |
| 503 | |
| 504 | pinctrl_i2c2: i2c2grp { |
| 505 | fsl,pins = < |
| 506 | MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| 507 | MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| 508 | >; |
| 509 | }; |
| 510 | |
| 511 | pinctrl_i2c3: i2c3grp { |
| 512 | fsl,pins = < |
| 513 | MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
| 514 | MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| 515 | >; |
| 516 | }; |
| 517 | |
Tim Harvey | b5f37b7 | 2014-09-08 23:07:30 -0700 | [diff] [blame] | 518 | pinctrl_pcie: pciegrp { |
| 519 | fsl,pins = < |
| 520 | MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ |
| 521 | MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ |
| 522 | >; |
| 523 | }; |
| 524 | |
| 525 | pinctrl_pps: ppsgrp { |
| 526 | fsl,pins = < |
| 527 | MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 |
| 528 | >; |
| 529 | }; |
| 530 | |
Tim Harvey | b325324 | 2014-04-30 23:32:30 -0700 | [diff] [blame] | 531 | pinctrl_pwm4: pwm4grp { |
| 532 | fsl,pins = < |
| 533 | MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 |
| 534 | >; |
| 535 | }; |
| 536 | |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 537 | pinctrl_uart1: uart1grp { |
| 538 | fsl,pins = < |
| 539 | MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 |
| 540 | MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 |
| 541 | >; |
| 542 | }; |
| 543 | |
| 544 | pinctrl_uart2: uart2grp { |
| 545 | fsl,pins = < |
| 546 | MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 |
| 547 | MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 |
| 548 | >; |
| 549 | }; |
| 550 | |
| 551 | pinctrl_uart5: uart5grp { |
| 552 | fsl,pins = < |
| 553 | MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 |
| 554 | MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 |
| 555 | >; |
| 556 | }; |
| 557 | |
| 558 | pinctrl_usbotg: usbotggrp { |
| 559 | fsl,pins = < |
| 560 | MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 |
Tim Harvey | b5f37b7 | 2014-09-08 23:07:30 -0700 | [diff] [blame] | 561 | MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ |
Tim Harvey | e3946fe | 2014-02-07 15:24:56 +0800 | [diff] [blame] | 562 | >; |
| 563 | }; |
| 564 | |
| 565 | pinctrl_usdhc3: usdhc3grp { |
| 566 | fsl,pins = < |
| 567 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| 568 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| 569 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| 570 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| 571 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| 572 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| 573 | >; |
| 574 | }; |
| 575 | }; |
| 576 | }; |