blob: 1763cc7ec02385297e6d93f93f2f5f448da25ed1 [file] [log] [blame]
Hans de Goede97cb8f12014-06-30 23:57:57 +02001/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/dts-v1/;
13/include/ "sun4i-a10.dtsi"
14/include/ "sunxi-common-regulators.dtsi"
15
16/ {
17 model = "BA10 tvbox";
18 compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
19
20 soc@01c00000 {
21 emac: ethernet@01c0b000 {
22 pinctrl-names = "default";
23 pinctrl-0 = <&emac_pins_a>;
24 phy = <&phy1>;
25 status = "okay";
26 };
27
28 mdio@01c0b080 {
29 status = "okay";
30
31 phy1: ethernet-phy@1 {
32 reg = <1>;
33 };
34 };
35
36 mmc0: mmc@01c0f000 {
37 pinctrl-names = "default";
38 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
39 vmmc-supply = <&reg_vcc3v3>;
40 bus-width = <4>;
41 cd-gpios = <&pio 7 1 0>; /* PH1 */
42 cd-inverted;
43 status = "okay";
44 };
45
46 usbphy: phy@01c13400 {
47 usb1_vbus-supply = <&reg_usb1_vbus>;
48 usb2_vbus-supply = <&reg_usb2_vbus>;
49 status = "okay";
50 };
51
52 ehci0: usb@01c14000 {
53 status = "okay";
54 };
55
56 ohci0: usb@01c14400 {
57 status = "okay";
58 };
59
60 ehci1: usb@01c1c000 {
61 status = "okay";
62 };
63
64 ohci1: usb@01c1c400 {
65 status = "okay";
66 };
67
68 pinctrl@01c20800 {
69 usb2_vbus_pin_a: usb2_vbus_pin@0 {
70 allwinner,pins = "PH12";
71 };
72 };
73
74 ir0: ir@01c21800 {
75 pinctrl-names = "default";
76 pinctrl-0 = <&ir0_pins_a>;
77 status = "okay";
78 };
79
80 uart0: serial@01c28000 {
81 pinctrl-names = "default";
82 pinctrl-0 = <&uart0_pins_a>;
83 status = "okay";
84 };
85
86 i2c0: i2c@01c2ac00 {
87 pinctrl-names = "default";
88 pinctrl-0 = <&i2c0_pins_a>;
89 status = "okay";
90
91 axp209: pmic@34 {
92 compatible = "x-powers,axp209";
93 reg = <0x34>;
94 interrupts = <0>;
95
96 interrupt-controller;
97 #interrupt-cells = <1>;
98 };
99 };
100 };
101
102 reg_usb1_vbus: usb1-vbus {
103 status = "okay";
104 };
105
106 reg_usb2_vbus: usb2-vbus {
107 gpio = <&pio 7 12 0>;
108 status = "okay";
109 };
110};