Jingchang Lu | d02e134 | 2013-05-28 17:12:22 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2013 Freescale Semiconductor, Inc. |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License as published by |
| 6 | * the Free Software Foundation; either version 2 of the License, or |
| 7 | * (at your option) any later version. |
| 8 | */ |
| 9 | |
| 10 | #include "skeleton.dtsi" |
| 11 | #include "vf610-pinfunc.h" |
| 12 | #include <dt-bindings/clock/vf610-clock.h> |
| 13 | |
| 14 | / { |
| 15 | aliases { |
| 16 | serial0 = &uart0; |
| 17 | serial1 = &uart1; |
| 18 | serial2 = &uart2; |
| 19 | serial3 = &uart3; |
| 20 | serial4 = &uart4; |
| 21 | serial5 = &uart5; |
| 22 | gpio0 = &gpio1; |
| 23 | gpio1 = &gpio2; |
| 24 | gpio2 = &gpio3; |
| 25 | gpio3 = &gpio4; |
| 26 | gpio4 = &gpio5; |
| 27 | }; |
| 28 | |
| 29 | cpus { |
| 30 | #address-cells = <1>; |
| 31 | #size-cells = <0>; |
| 32 | |
| 33 | cpu@0 { |
| 34 | compatible = "arm,cortex-a5"; |
| 35 | device_type = "cpu"; |
| 36 | reg = <0x0>; |
| 37 | next-level-cache = <&L2>; |
| 38 | }; |
| 39 | }; |
| 40 | |
| 41 | clocks { |
| 42 | #address-cells = <1>; |
| 43 | #size-cells = <0>; |
| 44 | |
| 45 | sxosc { |
| 46 | compatible = "fixed-clock"; |
| 47 | clock-frequency = <32768>; |
| 48 | }; |
| 49 | |
| 50 | fxosc { |
| 51 | compatible = "fixed-clock"; |
| 52 | clock-frequency = <24000000>; |
| 53 | }; |
| 54 | }; |
| 55 | |
| 56 | soc { |
| 57 | #address-cells = <1>; |
| 58 | #size-cells = <1>; |
| 59 | compatible = "simple-bus"; |
| 60 | interrupt-parent = <&intc>; |
| 61 | ranges; |
| 62 | |
| 63 | aips0: aips-bus@40000000 { |
| 64 | compatible = "fsl,aips-bus", "simple-bus"; |
| 65 | #address-cells = <1>; |
| 66 | #size-cells = <1>; |
| 67 | interrupt-parent = <&intc>; |
| 68 | reg = <0x40000000 0x70000>; |
| 69 | ranges; |
| 70 | |
| 71 | intc: interrupt-controller@40002000 { |
| 72 | compatible = "arm,cortex-a9-gic"; |
| 73 | #interrupt-cells = <3>; |
| 74 | #address-cells = <1>; |
| 75 | #size-cells = <1>; |
| 76 | interrupt-controller; |
| 77 | reg = <0x40003000 0x1000>, |
| 78 | <0x40002100 0x100>; |
| 79 | }; |
| 80 | |
| 81 | L2: l2-cache@40006000 { |
| 82 | compatible = "arm,pl310-cache"; |
| 83 | reg = <0x40006000 0x1000>; |
| 84 | cache-unified; |
| 85 | cache-level = <2>; |
| 86 | arm,data-latency = <1 1 1>; |
| 87 | arm,tag-latency = <2 2 2>; |
| 88 | }; |
| 89 | |
| 90 | uart0: serial@40027000 { |
| 91 | compatible = "fsl,vf610-lpuart"; |
| 92 | reg = <0x40027000 0x1000>; |
| 93 | interrupts = <0 61 0x00>; |
| 94 | clocks = <&clks VF610_CLK_UART0>; |
| 95 | clock-names = "ipg"; |
| 96 | status = "disabled"; |
| 97 | }; |
| 98 | |
| 99 | uart1: serial@40028000 { |
| 100 | compatible = "fsl,vf610-lpuart"; |
| 101 | reg = <0x40028000 0x1000>; |
| 102 | interrupts = <0 62 0x04>; |
| 103 | clocks = <&clks VF610_CLK_UART1>; |
| 104 | clock-names = "ipg"; |
| 105 | status = "disabled"; |
| 106 | }; |
| 107 | |
| 108 | uart2: serial@40029000 { |
| 109 | compatible = "fsl,vf610-lpuart"; |
| 110 | reg = <0x40029000 0x1000>; |
| 111 | interrupts = <0 63 0x04>; |
| 112 | clocks = <&clks VF610_CLK_UART2>; |
| 113 | clock-names = "ipg"; |
| 114 | status = "disabled"; |
| 115 | }; |
| 116 | |
| 117 | uart3: serial@4002a000 { |
| 118 | compatible = "fsl,vf610-lpuart"; |
| 119 | reg = <0x4002a000 0x1000>; |
| 120 | interrupts = <0 64 0x04>; |
| 121 | clocks = <&clks VF610_CLK_UART3>; |
| 122 | clock-names = "ipg"; |
| 123 | status = "disabled"; |
| 124 | }; |
| 125 | |
| 126 | sai2: sai@40031000 { |
| 127 | compatible = "fsl,vf610-sai"; |
| 128 | reg = <0x40031000 0x1000>; |
| 129 | interrupts = <0 86 0x04>; |
| 130 | clocks = <&clks VF610_CLK_SAI2>; |
| 131 | clock-names = "sai"; |
| 132 | status = "disabled"; |
| 133 | }; |
| 134 | |
| 135 | pit: pit@40037000 { |
| 136 | compatible = "fsl,vf610-pit"; |
| 137 | reg = <0x40037000 0x1000>; |
| 138 | interrupts = <0 39 0x04>; |
| 139 | clocks = <&clks VF610_CLK_PIT>; |
| 140 | clock-names = "pit"; |
| 141 | }; |
| 142 | |
| 143 | wdog@4003e000 { |
| 144 | compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; |
| 145 | reg = <0x4003e000 0x1000>; |
| 146 | clocks = <&clks VF610_CLK_WDT>; |
| 147 | clock-names = "wdog"; |
| 148 | }; |
| 149 | |
| 150 | qspi0: quadspi@40044000 { |
| 151 | #address-cells = <1>; |
| 152 | #size-cells = <0>; |
| 153 | compatible = "fsl,vf610-qspi"; |
| 154 | reg = <0x40044000 0x1000>; |
| 155 | interrupts = <0 24 0x04>; |
| 156 | clocks = <&clks VF610_CLK_QSPI0_EN>, |
| 157 | <&clks VF610_CLK_QSPI0>; |
| 158 | clock-names = "qspi_en", "qspi"; |
| 159 | status = "disabled"; |
| 160 | }; |
| 161 | |
| 162 | iomuxc: iomuxc@40048000 { |
| 163 | compatible = "fsl,vf610-iomuxc"; |
| 164 | reg = <0x40048000 0x1000>; |
Stephen Warren | 36af8f3 | 2013-06-13 14:59:53 -0600 | [diff] [blame] | 165 | #gpio-range-cells = <3>; |
Jingchang Lu | d02e134 | 2013-05-28 17:12:22 +0800 | [diff] [blame] | 166 | |
| 167 | /* functions and groups pins */ |
| 168 | |
| 169 | dcu0 { |
| 170 | pinctrl_dcu0_1: dcu0grp_1 { |
| 171 | fsl,pins = < |
| 172 | VF610_PAD_PTB8__GPIO_30 0x42 |
| 173 | VF610_PAD_PTE0__DCU0_HSYNC 0x42 |
| 174 | VF610_PAD_PTE1__DCU0_VSYNC 0x42 |
| 175 | VF610_PAD_PTE2__DCU0_PCLK 0x42 |
| 176 | VF610_PAD_PTE4__DCU0_DE 0x42 |
| 177 | VF610_PAD_PTE5__DCU0_R0 0x42 |
| 178 | VF610_PAD_PTE6__DCU0_R1 0x42 |
| 179 | VF610_PAD_PTE7__DCU0_R2 0x42 |
| 180 | VF610_PAD_PTE8__DCU0_R3 0x42 |
| 181 | VF610_PAD_PTE9__DCU0_R4 0x42 |
| 182 | VF610_PAD_PTE10__DCU0_R5 0x42 |
| 183 | VF610_PAD_PTE11__DCU0_R6 0x42 |
| 184 | VF610_PAD_PTE12__DCU0_R7 0x42 |
| 185 | VF610_PAD_PTE13__DCU0_G0 0x42 |
| 186 | VF610_PAD_PTE14__DCU0_G1 0x42 |
| 187 | VF610_PAD_PTE15__DCU0_G2 0x42 |
| 188 | VF610_PAD_PTE16__DCU0_G3 0x42 |
| 189 | VF610_PAD_PTE17__DCU0_G4 0x42 |
| 190 | VF610_PAD_PTE18__DCU0_G5 0x42 |
| 191 | VF610_PAD_PTE19__DCU0_G6 0x42 |
| 192 | VF610_PAD_PTE20__DCU0_G7 0x42 |
| 193 | VF610_PAD_PTE21__DCU0_B0 0x42 |
| 194 | VF610_PAD_PTE22__DCU0_B1 0x42 |
| 195 | VF610_PAD_PTE23__DCU0_B2 0x42 |
| 196 | VF610_PAD_PTE24__DCU0_B3 0x42 |
| 197 | VF610_PAD_PTE25__DCU0_B4 0x42 |
| 198 | VF610_PAD_PTE26__DCU0_B5 0x42 |
| 199 | VF610_PAD_PTE27__DCU0_B6 0x42 |
| 200 | VF610_PAD_PTE28__DCU0_B7 0x42 |
| 201 | >; |
| 202 | }; |
| 203 | }; |
| 204 | |
| 205 | dspi0 { |
| 206 | pinctrl_dspi0_1: dspi0grp_1 { |
| 207 | fsl,pins = < |
| 208 | VF610_PAD_PTB19__DSPI0_CS0 0x1182 |
| 209 | VF610_PAD_PTB20__DSPI0_SIN 0x1181 |
| 210 | VF610_PAD_PTB21__DSPI0_SOUT 0x1182 |
| 211 | VF610_PAD_PTB22__DSPI0_SCK 0x1182 |
| 212 | >; |
| 213 | }; |
| 214 | }; |
| 215 | |
| 216 | esdhc1 { |
| 217 | pinctrl_esdhc1_1: esdhc1grp_1 { |
| 218 | fsl,pins = < |
| 219 | VF610_PAD_PTA24__ESDHC1_CLK 0x31ef |
| 220 | VF610_PAD_PTA25__ESDHC1_CMD 0x31ef |
| 221 | VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef |
| 222 | VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef |
| 223 | VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef |
| 224 | VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef |
| 225 | VF610_PAD_PTA7__GPIO_134 0x219d |
| 226 | >; |
| 227 | }; |
| 228 | }; |
| 229 | |
| 230 | fec0 { |
| 231 | pinctrl_fec0_1: fec0grp_1 { |
| 232 | fsl,pins = < |
| 233 | VF610_PAD_PTA6__RMII_CLKIN 0x30d1 |
| 234 | VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3 |
| 235 | VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1 |
| 236 | VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 |
| 237 | VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 |
| 238 | VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 |
| 239 | VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 |
| 240 | VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 |
| 241 | VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 |
| 242 | VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 |
| 243 | >; |
| 244 | }; |
| 245 | }; |
| 246 | |
| 247 | fec1 { |
| 248 | pinctrl_fec1_1: fec1grp_1 { |
| 249 | fsl,pins = < |
| 250 | VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 |
| 251 | VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 |
| 252 | VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 |
| 253 | VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 |
| 254 | VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 |
| 255 | VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 |
| 256 | VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 |
| 257 | VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 |
| 258 | VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 |
| 259 | >; |
| 260 | }; |
| 261 | }; |
| 262 | |
| 263 | i2c0 { |
| 264 | pinctrl_i2c0_1: i2c0grp_1 { |
| 265 | fsl,pins = < |
| 266 | VF610_PAD_PTB14__I2C0_SCL 0x30d3 |
| 267 | VF610_PAD_PTB15__I2C0_SDA 0x30d3 |
| 268 | >; |
| 269 | }; |
| 270 | }; |
| 271 | |
| 272 | pwm0 { |
| 273 | pinctrl_pwm0_1: pwm0grp_1 { |
| 274 | fsl,pins = < |
| 275 | VF610_PAD_PTB0__FTM0_CH0 0x1582 |
| 276 | VF610_PAD_PTB1__FTM0_CH1 0x1582 |
| 277 | VF610_PAD_PTB2__FTM0_CH2 0x1582 |
| 278 | VF610_PAD_PTB3__FTM0_CH3 0x1582 |
| 279 | VF610_PAD_PTB6__FTM0_CH6 0x1582 |
| 280 | VF610_PAD_PTB7__FTM0_CH7 0x1582 |
| 281 | >; |
| 282 | }; |
| 283 | }; |
| 284 | |
| 285 | qspi0 { |
| 286 | pinctrl_qspi0_1: qspi0grp_1 { |
| 287 | fsl,pins = < |
| 288 | VF610_PAD_PTD0__QSPI0_A_QSCK 0x307b |
| 289 | VF610_PAD_PTD1__QSPI0_A_CS0 0x307f |
| 290 | VF610_PAD_PTD2__QSPI0_A_DATA3 0x3073 |
| 291 | VF610_PAD_PTD3__QSPI0_A_DATA2 0x3073 |
| 292 | VF610_PAD_PTD4__QSPI0_A_DATA1 0x3073 |
| 293 | VF610_PAD_PTD5__QSPI0_A_DATA0 0x307b |
| 294 | VF610_PAD_PTD7__QSPI0_B_QSCK 0x307b |
| 295 | VF610_PAD_PTD8__QSPI0_B_CS0 0x307f |
| 296 | VF610_PAD_PTD9__QSPI0_B_DATA3 0x3073 |
| 297 | VF610_PAD_PTD10__QSPI0_B_DATA2 0x3073 |
| 298 | VF610_PAD_PTD11__QSPI0_B_DATA1 0x3073 |
| 299 | VF610_PAD_PTD12__QSPI0_B_DATA0 0x307b |
| 300 | >; |
| 301 | }; |
| 302 | }; |
| 303 | |
| 304 | sai2 { |
| 305 | pinctrl_sai2_1: sai2grp_1 { |
| 306 | fsl,pins = < |
| 307 | VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed |
| 308 | VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee |
| 309 | VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed |
| 310 | VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed |
| 311 | VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed |
| 312 | VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed |
| 313 | VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed |
| 314 | >; |
| 315 | }; |
| 316 | }; |
| 317 | |
| 318 | uart1 { |
| 319 | pinctrl_uart1_1: uart1grp_1 { |
| 320 | fsl,pins = < |
| 321 | VF610_PAD_PTB4__UART1_TX 0x21a2 |
| 322 | VF610_PAD_PTB5__UART1_RX 0x21a1 |
| 323 | >; |
| 324 | }; |
| 325 | }; |
| 326 | |
| 327 | usbvbus { |
| 328 | pinctrl_usbvbus_1: usbvbusgrp_1 { |
| 329 | fsl,pins = < |
| 330 | VF610_PAD_PTA24__USB1_VBUS_EN 0x219c |
| 331 | VF610_PAD_PTA16__USB0_VBUS_EN 0x219c |
| 332 | >; |
| 333 | }; |
| 334 | }; |
| 335 | |
| 336 | }; |
| 337 | |
| 338 | gpio1: gpio@40049000 { |
| 339 | compatible = "fsl,vf610-gpio"; |
| 340 | reg = <0x40049000 0x1000 0x400ff000 0x40>; |
| 341 | interrupts = <0 107 0x04>; |
| 342 | gpio-controller; |
| 343 | #gpio-cells = <2>; |
| 344 | interrupt-controller; |
| 345 | #interrupt-cells = <2>; |
Stephen Warren | 36af8f3 | 2013-06-13 14:59:53 -0600 | [diff] [blame] | 346 | gpio-ranges = <&iomuxc 0 0 32>; |
Jingchang Lu | d02e134 | 2013-05-28 17:12:22 +0800 | [diff] [blame] | 347 | }; |
| 348 | |
| 349 | gpio2: gpio@4004a000 { |
| 350 | compatible = "fsl,vf610-gpio"; |
| 351 | reg = <0x4004a000 0x1000 0x400ff040 0x40>; |
| 352 | interrupts = <0 108 0x04>; |
| 353 | gpio-controller; |
| 354 | #gpio-cells = <2>; |
| 355 | interrupt-controller; |
| 356 | #interrupt-cells = <2>; |
Stephen Warren | 36af8f3 | 2013-06-13 14:59:53 -0600 | [diff] [blame] | 357 | gpio-ranges = <&iomuxc 0 32 32>; |
Jingchang Lu | d02e134 | 2013-05-28 17:12:22 +0800 | [diff] [blame] | 358 | }; |
| 359 | |
| 360 | gpio3: gpio@4004b000 { |
| 361 | compatible = "fsl,vf610-gpio"; |
| 362 | reg = <0x4004b000 0x1000 0x400ff080 0x40>; |
| 363 | interrupts = <0 109 0x04>; |
| 364 | gpio-controller; |
| 365 | #gpio-cells = <2>; |
| 366 | interrupt-controller; |
| 367 | #interrupt-cells = <2>; |
Stephen Warren | 36af8f3 | 2013-06-13 14:59:53 -0600 | [diff] [blame] | 368 | gpio-ranges = <&iomuxc 0 64 32>; |
Jingchang Lu | d02e134 | 2013-05-28 17:12:22 +0800 | [diff] [blame] | 369 | }; |
| 370 | |
| 371 | gpio4: gpio@4004c000 { |
| 372 | compatible = "fsl,vf610-gpio"; |
| 373 | reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; |
| 374 | interrupts = <0 110 0x04>; |
| 375 | gpio-controller; |
| 376 | #gpio-cells = <2>; |
| 377 | interrupt-controller; |
| 378 | #interrupt-cells = <2>; |
Stephen Warren | 36af8f3 | 2013-06-13 14:59:53 -0600 | [diff] [blame] | 379 | gpio-ranges = <&iomuxc 0 96 32>; |
Jingchang Lu | d02e134 | 2013-05-28 17:12:22 +0800 | [diff] [blame] | 380 | }; |
| 381 | |
| 382 | gpio5: gpio@4004d000 { |
| 383 | compatible = "fsl,vf610-gpio"; |
| 384 | reg = <0x4004d000 0x1000 0x400ff100 0x40>; |
| 385 | interrupts = <0 111 0x04>; |
| 386 | gpio-controller; |
| 387 | #gpio-cells = <2>; |
| 388 | interrupt-controller; |
| 389 | #interrupt-cells = <2>; |
Stephen Warren | 36af8f3 | 2013-06-13 14:59:53 -0600 | [diff] [blame] | 390 | gpio-ranges = <&iomuxc 0 128 7>; |
Jingchang Lu | d02e134 | 2013-05-28 17:12:22 +0800 | [diff] [blame] | 391 | }; |
| 392 | |
| 393 | anatop@40050000 { |
| 394 | compatible = "fsl,vf610-anatop"; |
| 395 | reg = <0x40050000 0x1000>; |
| 396 | }; |
| 397 | |
| 398 | i2c0: i2c@40066000 { |
| 399 | #address-cells = <1>; |
| 400 | #size-cells = <0>; |
| 401 | compatible = "fsl,vf610-i2c"; |
| 402 | reg = <0x40066000 0x1000>; |
| 403 | interrupts =<0 71 0x04>; |
| 404 | clocks = <&clks VF610_CLK_I2C0>; |
| 405 | clock-names = "ipg"; |
| 406 | status = "disabled"; |
| 407 | }; |
| 408 | |
| 409 | clks: ccm@4006b000 { |
| 410 | compatible = "fsl,vf610-ccm"; |
| 411 | reg = <0x4006b000 0x1000>; |
| 412 | #clock-cells = <1>; |
| 413 | }; |
| 414 | }; |
| 415 | |
| 416 | aips1: aips-bus@40080000 { |
| 417 | compatible = "fsl,aips-bus", "simple-bus"; |
| 418 | #address-cells = <1>; |
| 419 | #size-cells = <1>; |
| 420 | reg = <0x40080000 0x80000>; |
| 421 | ranges; |
| 422 | |
| 423 | uart4: serial@400a9000 { |
| 424 | compatible = "fsl,vf610-lpuart"; |
| 425 | reg = <0x400a9000 0x1000>; |
| 426 | interrupts = <0 65 0x04>; |
| 427 | clocks = <&clks VF610_CLK_UART4>; |
| 428 | clock-names = "ipg"; |
| 429 | status = "disabled"; |
| 430 | }; |
| 431 | |
| 432 | uart5: serial@400aa000 { |
| 433 | compatible = "fsl,vf610-lpuart"; |
| 434 | reg = <0x400aa000 0x1000>; |
| 435 | interrupts = <0 66 0x04>; |
| 436 | clocks = <&clks VF610_CLK_UART5>; |
| 437 | clock-names = "ipg"; |
| 438 | status = "disabled"; |
| 439 | }; |
| 440 | |
| 441 | fec0: ethernet@400d0000 { |
| 442 | compatible = "fsl,mvf600-fec"; |
| 443 | reg = <0x400d0000 0x1000>; |
| 444 | interrupts = <0 78 0x04>; |
Shawn Guo | 4f71612 | 2013-07-10 14:05:44 +0800 | [diff] [blame] | 445 | clocks = <&clks VF610_CLK_ENET0>, |
| 446 | <&clks VF610_CLK_ENET0>, |
Jingchang Lu | d02e134 | 2013-05-28 17:12:22 +0800 | [diff] [blame] | 447 | <&clks VF610_CLK_ENET>; |
| 448 | clock-names = "ipg", "ahb", "ptp"; |
| 449 | status = "disabled"; |
| 450 | }; |
| 451 | |
| 452 | fec1: ethernet@400d1000 { |
| 453 | compatible = "fsl,mvf600-fec"; |
| 454 | reg = <0x400d1000 0x1000>; |
| 455 | interrupts = <0 79 0x04>; |
Shawn Guo | 4f71612 | 2013-07-10 14:05:44 +0800 | [diff] [blame] | 456 | clocks = <&clks VF610_CLK_ENET1>, |
| 457 | <&clks VF610_CLK_ENET1>, |
Jingchang Lu | d02e134 | 2013-05-28 17:12:22 +0800 | [diff] [blame] | 458 | <&clks VF610_CLK_ENET>; |
| 459 | clock-names = "ipg", "ahb", "ptp"; |
| 460 | status = "disabled"; |
| 461 | }; |
| 462 | }; |
| 463 | }; |
| 464 | }; |