Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / f212bd95a9f62b7929c59b16e1d3bbde2fb4081d / . / arch / arm / boot / dts / imx6qdl-aristainetos2.dtsi
blob: a47a0399a1728da0c1293a8312f30bef082fd349 [file] [log] [blame]
Heiko Schocherd94a3d32015-05-26 06:06:26 +0200[diff] [blame]1/*
2 * support for the imx6 based aristainetos2 board
3 *
4 * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License
13 * version 2 as published by the Free Software Foundation.
14 *
15 * This file is distributed in the hope that it will be useful
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * Or, alternatively
21 *
22 * b) Permission is hereby granted, free of charge, to any person
23 * obtaining a copy of this software and associated documentation
24 * files (the "Software"), to deal in the Software without
25 * restriction, including without limitation the rights to use
26 * copy, modify, merge, publish, distribute, sublicense, and/or
27 * sell copies of the Software, and to permit persons to whom the
28 * Software is furnished to do so, subject to the following
29 * conditions:
30 *
31 * The above copyright notice and this permission notice shall be
32 * included in all copies or substantial portions of the Software.
33 *
34 * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 * OTHER DEALINGS IN THE SOFTWARE.
42 */
43#include <dt-bindings/gpio/gpio.h>
44#include <dt-bindings/clock/imx6qdl-clock.h>
45
46/ {
47 backlight: backlight {
48 compatible = "pwm-backlight";
49 pwms = <&pwm1 0 5000000>;
50 brightness-levels = <0 4 8 16 32 64 128 255>;
51 default-brightness-level = <7>;
52 enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
53 };
54
55 regulators {
56 compatible = "simple-bus";
57
58 reg_2p5v: 2p5v {
59 compatible = "regulator-fixed";
60 regulator-name = "2P5V";
61 regulator-min-microvolt = <2500000>;
62 regulator-max-microvolt = <2500000>;
63 regulator-always-on;
64 };
65
66 reg_3p3v: 3p3v {
67 compatible = "regulator-fixed";
68 regulator-name = "3P3V";
69 regulator-min-microvolt = <3300000>;
70 regulator-max-microvolt = <3300000>;
71 regulator-always-on;
72 };
73
74 reg_usbh1_vbus: usb-h1-vbus {
75 compatible = "regulator-fixed";
76 enable-active-high;
77 gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
78 pinctrl-names = "default";
79 pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
80 regulator-name = "usb_h1_vbus";
81 regulator-min-microvolt = <5000000>;
82 regulator-max-microvolt = <5000000>;
83 };
84
85 reg_usbotg_vbus: usb-otg-vbus {
86 compatible = "regulator-fixed";
87 enable-active-high;
88 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
91 regulator-name = "usb_otg_vbus";
92 regulator-min-microvolt = <5000000>;
93 regulator-max-microvolt = <5000000>;
94 };
95 };
96};
97
98&audmux {
99 pinctrl-names = "default";
100 pinctrl-0 = <&pinctrl_audmux>;
101 status = "okay";
102};
103
104&can1 {
105 pinctrl-names = "default";
106 pinctrl-0 = <&pinctrl_flexcan1>;
107 status = "okay";
108};
109
110&can2 {
111 pinctrl-names = "default";
112 pinctrl-0 = <&pinctrl_flexcan2>;
113 status = "okay";
114};
115
116&ecspi1 {
117 fsl,spi-num-chipselects = <3>;
118 cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
119 &gpio4 10 GPIO_ACTIVE_HIGH
120 &gpio4 11 GPIO_ACTIVE_HIGH>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&pinctrl_ecspi1>;
123 status = "okay";
124};
125
126&ecspi2 {
127 fsl,spi-num-chipselects = <2>;
128 cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
129 pinctrl-names = "default";
130 pinctrl-0 = <&pinctrl_ecspi2>;
131 status = "okay";
132};
133
134&ecspi4 {
135 fsl,spi-num-chipselects = <2>;
136 cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
137 pinctrl-names = "default";
138 pinctrl-0 = <&pinctrl_ecspi4>;
139 status = "okay";
140
141 flash: m25p80@1 {
142 #address-cells = <1>;
143 #size-cells = <1>;
144 compatible = "micron,n25q128a11";
145 spi-max-frequency = <20000000>;
146 reg = <1>;
147 };
148};
149
150&i2c1 {
151 pinctrl-names = "default";
152 pinctrl-0 = <&pinctrl_i2c1>;
153 status = "okay";
154
155 pmic@58 {
156 compatible = "dlg,da9063";
157 reg = <0x58>;
158 interrupt-parent = <&gpio1>;
159 interrupts = <04 0x8>;
160
161 regulators {
162 bcore1 {
163 regulator-name = "bcore1";
164 regulator-always-on = <1>;
165 regulator-min-microvolt = <300000>;
166 regulator-max-microvolt = <3300000>;
167 };
168
169 bcore2 {
170 regulator-name = "bcore2";
171 regulator-always-on = <1>;
172 regulator-min-microvolt = <300000>;
173 regulator-max-microvolt = <3300000>;
174 };
175
176 bpro {
177 regulator-name = "bpro";
178 regulator-always-on = <1>;
179 regulator-min-microvolt = <300000>;
180 regulator-max-microvolt = <3300000>;
181 };
182
183 bperi {
184 regulator-name = "bperi";
185 regulator-always-on = <1>;
186 regulator-min-microvolt = <300000>;
187 regulator-max-microvolt = <3300000>;
188 };
189
190 bmem {
191 regulator-name = "bmem";
192 regulator-always-on = <1>;
193 regulator-min-microvolt = <300000>;
194 regulator-max-microvolt = <3300000>;
195 };
196
197 ldo2 {
198 regulator-name = "ldo2";
199 regulator-always-on = <1>;
200 regulator-min-microvolt = <300000>;
201 regulator-max-microvolt = <1800000>;
202 };
203
204 ldo3 {
205 regulator-name = "ldo3";
206 regulator-always-on = <1>;
207 regulator-min-microvolt = <300000>;
208 regulator-max-microvolt = <3300000>;
209 };
210
211 ldo4 {
212 regulator-name = "ldo4";
213 regulator-always-on = <1>;
214 regulator-min-microvolt = <300000>;
215 regulator-max-microvolt = <3300000>;
216 };
217
218 ldo5 {
219 regulator-name = "ldo5";
220 regulator-always-on = <1>;
221 regulator-min-microvolt = <300000>;
222 regulator-max-microvolt = <3300000>;
223 };
224
225 ldo6 {
226 regulator-name = "ldo6";
227 regulator-always-on = <1>;
228 regulator-min-microvolt = <300000>;
229 regulator-max-microvolt = <3300000>;
230 };
231
232 ldo7 {
233 regulator-name = "ldo7";
234 regulator-always-on = <1>;
235 regulator-min-microvolt = <300000>;
236 regulator-max-microvolt = <3300000>;
237 };
238
239 ldo8 {
240 regulator-name = "ldo8";
241 regulator-always-on = <1>;
242 regulator-min-microvolt = <300000>;
243 regulator-max-microvolt = <3300000>;
244 };
245
246 ldo9 {
247 regulator-name = "ldo9";
248 regulator-always-on = <1>;
249 regulator-min-microvolt = <300000>;
250 regulator-max-microvolt = <3300000>;
251 };
252
253 ldo10 {
254 regulator-name = "ldo10";
255 regulator-always-on = <1>;
256 regulator-min-microvolt = <300000>;
257 regulator-max-microvolt = <3300000>;
258 };
259
260 ldo11 {
261 regulator-name = "ldo11";
262 regulator-always-on = <1>;
263 regulator-min-microvolt = <300000>;
264 regulator-max-microvolt = <3300000>;
265 };
266
267 bio {
268 regulator-name = "bio";
269 regulator-always-on = <1>;
270 regulator-min-microvolt = <1800000>;
271 regulator-max-microvolt = <1800000>;
272 };
273 };
274 };
275
276 tmp103: tmp103@71 {
277 compatible = "ti,tmp103";
278 reg = <0x71>;
279 };
280};
281
282&i2c2 {
283 pinctrl-names = "default";
284 pinctrl-0 = <&pinctrl_i2c2>;
285 status = "okay";
286};
287
288&i2c3 {
289 pinctrl-names = "default";
290 pinctrl-0 = <&pinctrl_i2c3>;
291 status = "okay";
292
293 expander: tca6416@20 {
294 compatible = "ti,tca6416";
295 reg = <0x20>;
296 #gpio-cells = <2>;
297 gpio-controller;
298 };
299
300 rtc@68 {
301 compatible = "dallas,m41t00";
302 reg = <0x68>;
303 };
304};
305
306&i2c4 {
307 pinctrl-names = "default";
308 pinctrl-0 = <&pinctrl_i2c4>;
309 status = "okay";
310
311 eeprom@50{
312 compatible = "atmel,24c64";
313 reg = <0x50>;
314 };
315
316 eeprom@57{
317 compatible = "atmel,24c64";
318 reg = <0x57>;
319 };
320};
321
322&fec {
323 pinctrl-names = "default";
324 pinctrl-0 = <&pinctrl_enet>;
325 phy-mode = "rgmii";
326 phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_HIGH>;
327 txd0-skew-ps = <0>;
328 txd1-skew-ps = <0>;
329 txd2-skew-ps = <0>;
330 txd3-skew-ps = <0>;
331 status = "okay";
332};
333
334&gpmi {
335 pinctrl-names = "default";
336 pinctrl-0 = <&pinctrl_gpmi_nand>;
337 status = "okay";
338};
339
340&pcie {
341 reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
342 status = "okay";
343};
344
345&pwm1 {
346 pinctrl-names = "default";
347 pinctrl-0 = <&pinctrl_pwm1>;
348 status = "okay";
349};
350
351&uart1 {
352 pinctrl-names = "default";
353 pinctrl-0 = <&pinctrl_uart1>;
354 fsl,uart-has-rtscts;
355 status = "okay";
356};
357
358&uart2 {
359 pinctrl-names = "default";
360 pinctrl-0 = <&pinctrl_uart2>;
361 status = "okay";
362};
363
364&uart3 {
365 pinctrl-names = "default";
366 pinctrl-0 = <&pinctrl_uart3>;
367 fsl,uart-has-rtscts;
368 status = "okay";
369};
370
371&uart4 {
372 pinctrl-names = "default";
373 pinctrl-0 = <&pinctrl_uart4>;
374 status = "okay";
375};
376
377&usbh1 {
378 vbus-supply = <&reg_usbh1_vbus>;
379 dr_mode = "host";
380 status = "okay";
381};
382
383&usbotg {
384 vbus-supply = <&reg_usbotg_vbus>;
385 pinctrl-names = "default";
386 pinctrl-0 = <&pinctrl_usbotg>;
387 disable-over-current;
388 dr_mode = "host";
389 status = "okay";
390};
391
392&usdhc1 {
393 pinctrl-names = "default";
394 pinctrl-0 = <&pinctrl_usdhc1>;
Dong Aisheng89c1a8cf2015-07-22 20:53:02 +0800[diff] [blame]395 cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
Heiko Schocherd94a3d32015-05-26 06:06:26 +0200[diff] [blame]396 no-1-8-v;
397 status = "okay";
398};
399
400&usdhc2 {
401 pinctrl-names = "default";
402 pinctrl-0 = <&pinctrl_usdhc2>;
Dong Aisheng89c1a8cf2015-07-22 20:53:02 +0800[diff] [blame]403 cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
Heiko Schocherd94a3d32015-05-26 06:06:26 +0200[diff] [blame]404 wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
405 no-1-8-v;
406 status = "okay";
407};
408
409&iomuxc {
410 pinctrl-names = "default";
411 pinctrl-0 = <&pinctrl_gpio>;
412
413 pinctrl_audmux: audmux {
414 fsl,pins = <
415 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
416 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
417 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
418 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
419 >;
420 };
421
422 pinctrl_ecspi1: ecspi1grp {
423 fsl,pins = <
424 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
425 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
426 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
427 MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */
428 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */
429 MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */
430 >;
431 };
432
433 pinctrl_ecspi2: ecspi2grp {
434 fsl,pins = <
435 MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
436 MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
437 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
438 MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 /* SS0# */
439 MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 /* SS1# */
440 >;
441 };
442
443 pinctrl_ecspi4: ecspi4grp {
444 fsl,pins = <
445 MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
446 MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
447 MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
448 MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */
449 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */
450 MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
451 >;
452 };
453
454 pinctrl_enet: enetgrp {
455 fsl,pins = <
456 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
457 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
458 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
459 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
460 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
461 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
462 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
463 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
464 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
465 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
466 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
467 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
468 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
469 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
470 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
471 >;
472 };
473
474 pinctrl_flexcan1: flexcan1grp {
475 fsl,pins = <
476 MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
477 MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
478 >;
479 };
480
481 pinctrl_flexcan2: flexcan2grp {
482 fsl,pins = <
483 MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
484 MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
485 >;
486 };
487
488 pinctrl_gpio: gpiogrp {
489 fsl,pins = <
490 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* led enable */
491 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* LCD power enable */
492 MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* led yellow */
493 MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 /* led red */
494 MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 /* led green */
495 MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 /* led blue */
496 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* Profibus IRQ */
497 MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* FPGA IRQ */
498 MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 /* spi bus #2 SS driver enable */
499 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/
500 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b0b0 /* USB_OTG_ID = GPIO1_24*/
501 MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* Touchscreen IRQ */
502 MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b0 /* PCIe reset */
503 >;
504 };
505
506 pinctrl_gpmi_nand: gpmi-nand {
507 fsl,pins = <
508 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
509 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
510 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
511 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
512 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
513 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
514 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
515 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
516 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
517 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
518 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
519 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
520 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
521 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
522 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
523 >;
524 };
525
526 pinctrl_i2c1: i2c1grp {
527 fsl,pins = <
528 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
529 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
530 >;
531 };
532
533 pinctrl_i2c2: i2c2grp {
534 fsl,pins = <
535 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
536 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
537 >;
538 };
539
540 pinctrl_i2c3: i2c3grp {
541 fsl,pins = <
542 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
543 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
544 >;
545 };
546
547 pinctrl_i2c4: i2c4grp {
548 fsl,pins = <
549 MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
550 MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
551 >;
552 };
553
554 pinctrl_pwm1: pwm1grp {
555 fsl,pins = <
556 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
557 MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 /* backlight enable */
558 >;
559 };
560
561 pinctrl_uart1: uart1grp {
562 fsl,pins = <
563 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
564 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
565 MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
566 MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
567 >;
568 };
569
570 pinctrl_uart2: uart2grp {
571 fsl,pins = <
572 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
573 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
574 >;
575 };
576
577 pinctrl_uart3: uart3grp {
578 fsl,pins = <
579 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
580 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
581 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
582 MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
583 >;
584 };
585
586 pinctrl_uart4: uart4grp {
587 fsl,pins = <
588 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
589 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
590 >;
591 };
592
593 pinctrl_usbotg: usbotggrp {
594 fsl,pins = <
595 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
596 >;
597 };
598
599 pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
600 fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
601 };
602
603 pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
604 fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
605 };
606
607 pinctrl_usdhc1: usdhc1grp {
608 fsl,pins = <
609 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
610 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
611 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
612 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
613 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
614 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
615 MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 /* SD1 card detect input */
616 MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* SD1 write protect input */
617 >;
618 };
619
620 pinctrl_usdhc2: usdhc2grp {
621 fsl,pins = <
622 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71
623 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71
624 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
625 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
626 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
627 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
628 MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 /* SD2 level shifter output enable */
629 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 /* SD2 card detect input */
630 MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SD2 write protect input */
631 >;
632 };
633};