Tero Kristo | f60b1ea | 2013-06-18 18:55:59 +0300 | [diff] [blame] | 1 | /* |
| 2 | * OMAP gate clock support |
| 3 | * |
| 4 | * Copyright (C) 2013 Texas Instruments, Inc. |
| 5 | * |
| 6 | * Tero Kristo <t-kristo@ti.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License version 2 as |
| 10 | * published by the Free Software Foundation. |
| 11 | * |
| 12 | * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| 13 | * kind, whether express or implied; without even the implied warranty |
| 14 | * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | */ |
| 17 | |
| 18 | #include <linux/clk-provider.h> |
| 19 | #include <linux/slab.h> |
| 20 | #include <linux/io.h> |
| 21 | #include <linux/of.h> |
| 22 | #include <linux/of_address.h> |
| 23 | #include <linux/clk/ti.h> |
| 24 | |
| 25 | #define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) |
| 26 | |
| 27 | #undef pr_fmt |
| 28 | #define pr_fmt(fmt) "%s: " fmt, __func__ |
| 29 | |
| 30 | static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk); |
| 31 | |
| 32 | static const struct clk_ops omap_gate_clkdm_clk_ops = { |
| 33 | .init = &omap2_init_clk_clkdm, |
| 34 | .enable = &omap2_clkops_enable_clkdm, |
| 35 | .disable = &omap2_clkops_disable_clkdm, |
| 36 | }; |
| 37 | |
| 38 | static const struct clk_ops omap_gate_clk_ops = { |
| 39 | .init = &omap2_init_clk_clkdm, |
| 40 | .enable = &omap2_dflt_clk_enable, |
| 41 | .disable = &omap2_dflt_clk_disable, |
| 42 | .is_enabled = &omap2_dflt_clk_is_enabled, |
| 43 | }; |
| 44 | |
| 45 | static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = { |
| 46 | .init = &omap2_init_clk_clkdm, |
| 47 | .enable = &omap36xx_gate_clk_enable_with_hsdiv_restore, |
| 48 | .disable = &omap2_dflt_clk_disable, |
| 49 | .is_enabled = &omap2_dflt_clk_is_enabled, |
| 50 | }; |
| 51 | |
| 52 | /** |
| 53 | * omap36xx_gate_clk_enable_with_hsdiv_restore - enable clocks suffering |
| 54 | * from HSDivider PWRDN problem Implements Errata ID: i556. |
| 55 | * @clk: DPLL output struct clk |
| 56 | * |
| 57 | * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck, |
| 58 | * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset |
| 59 | * valueafter their respective PWRDN bits are set. Any dummy write |
| 60 | * (Any other value different from the Read value) to the |
| 61 | * corresponding CM_CLKSEL register will refresh the dividers. |
| 62 | */ |
| 63 | static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk) |
| 64 | { |
| 65 | struct clk_divider *parent; |
| 66 | struct clk_hw *parent_hw; |
| 67 | u32 dummy_v, orig_v; |
| 68 | int ret; |
| 69 | |
| 70 | /* Clear PWRDN bit of HSDIVIDER */ |
| 71 | ret = omap2_dflt_clk_enable(clk); |
| 72 | |
| 73 | /* Parent is the x2 node, get parent of parent for the m2 div */ |
| 74 | parent_hw = __clk_get_hw(__clk_get_parent(__clk_get_parent(clk->clk))); |
| 75 | parent = to_clk_divider(parent_hw); |
| 76 | |
| 77 | /* Restore the dividers */ |
| 78 | if (!ret) { |
| 79 | orig_v = ti_clk_ll_ops->clk_readl(parent->reg); |
| 80 | dummy_v = orig_v; |
| 81 | |
| 82 | /* Write any other value different from the Read value */ |
| 83 | dummy_v ^= (1 << parent->shift); |
| 84 | ti_clk_ll_ops->clk_writel(dummy_v, parent->reg); |
| 85 | |
| 86 | /* Write the original divider */ |
| 87 | ti_clk_ll_ops->clk_writel(orig_v, parent->reg); |
| 88 | } |
| 89 | |
| 90 | return ret; |
| 91 | } |
| 92 | |
| 93 | static void __init _of_ti_gate_clk_setup(struct device_node *node, |
| 94 | const struct clk_ops *ops, |
| 95 | const struct clk_hw_omap_ops *hw_ops) |
| 96 | { |
| 97 | struct clk *clk; |
| 98 | struct clk_init_data init = { NULL }; |
| 99 | struct clk_hw_omap *clk_hw; |
| 100 | const char *clk_name = node->name; |
| 101 | const char *parent_name; |
| 102 | u32 val; |
| 103 | |
| 104 | clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); |
| 105 | if (!clk_hw) |
| 106 | return; |
| 107 | |
| 108 | clk_hw->hw.init = &init; |
| 109 | |
| 110 | init.name = clk_name; |
| 111 | init.ops = ops; |
| 112 | |
| 113 | if (ops != &omap_gate_clkdm_clk_ops) { |
| 114 | clk_hw->enable_reg = ti_clk_get_reg_addr(node, 0); |
| 115 | if (!clk_hw->enable_reg) |
| 116 | goto cleanup; |
| 117 | |
| 118 | if (!of_property_read_u32(node, "ti,bit-shift", &val)) |
| 119 | clk_hw->enable_bit = val; |
| 120 | } |
| 121 | |
| 122 | clk_hw->ops = hw_ops; |
| 123 | |
| 124 | clk_hw->flags = MEMMAP_ADDRESSING; |
| 125 | |
| 126 | if (of_clk_get_parent_count(node) != 1) { |
| 127 | pr_err("%s must have 1 parent\n", clk_name); |
| 128 | goto cleanup; |
| 129 | } |
| 130 | |
| 131 | parent_name = of_clk_get_parent_name(node, 0); |
| 132 | init.parent_names = &parent_name; |
| 133 | init.num_parents = 1; |
| 134 | |
| 135 | if (of_property_read_bool(node, "ti,set-rate-parent")) |
| 136 | init.flags |= CLK_SET_RATE_PARENT; |
| 137 | |
| 138 | if (of_property_read_bool(node, "ti,set-bit-to-disable")) |
| 139 | clk_hw->flags |= INVERT_ENABLE; |
| 140 | |
| 141 | clk = clk_register(NULL, &clk_hw->hw); |
| 142 | |
| 143 | if (!IS_ERR(clk)) { |
| 144 | of_clk_add_provider(node, of_clk_src_simple_get, clk); |
| 145 | return; |
| 146 | } |
| 147 | |
| 148 | cleanup: |
| 149 | kfree(clk_hw); |
| 150 | } |
| 151 | |
| 152 | static void __init |
| 153 | _of_ti_composite_gate_clk_setup(struct device_node *node, |
| 154 | const struct clk_hw_omap_ops *hw_ops) |
| 155 | { |
| 156 | struct clk_hw_omap *gate; |
| 157 | u32 val = 0; |
| 158 | |
| 159 | gate = kzalloc(sizeof(*gate), GFP_KERNEL); |
| 160 | if (!gate) |
| 161 | return; |
| 162 | |
| 163 | gate->enable_reg = ti_clk_get_reg_addr(node, 0); |
| 164 | if (!gate->enable_reg) |
| 165 | goto cleanup; |
| 166 | |
| 167 | of_property_read_u32(node, "ti,bit-shift", &val); |
| 168 | |
| 169 | gate->enable_bit = val; |
| 170 | gate->ops = hw_ops; |
| 171 | gate->flags = MEMMAP_ADDRESSING; |
| 172 | |
| 173 | if (!ti_clk_add_component(node, &gate->hw, CLK_COMPONENT_TYPE_GATE)) |
| 174 | return; |
| 175 | |
| 176 | cleanup: |
| 177 | kfree(gate); |
| 178 | } |
| 179 | |
| 180 | static void __init |
| 181 | of_ti_composite_no_wait_gate_clk_setup(struct device_node *node) |
| 182 | { |
| 183 | _of_ti_composite_gate_clk_setup(node, NULL); |
| 184 | } |
| 185 | CLK_OF_DECLARE(ti_composite_no_wait_gate_clk, "ti,composite-no-wait-gate-clock", |
| 186 | of_ti_composite_no_wait_gate_clk_setup); |
| 187 | |
Tero Kristo | b3654d7 | 2014-03-05 10:03:38 +0200 | [diff] [blame] | 188 | #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) |
Tero Kristo | f60b1ea | 2013-06-18 18:55:59 +0300 | [diff] [blame] | 189 | static void __init of_ti_composite_interface_clk_setup(struct device_node *node) |
| 190 | { |
| 191 | _of_ti_composite_gate_clk_setup(node, &clkhwops_iclk_wait); |
| 192 | } |
| 193 | CLK_OF_DECLARE(ti_composite_interface_clk, "ti,composite-interface-clock", |
| 194 | of_ti_composite_interface_clk_setup); |
| 195 | #endif |
| 196 | |
| 197 | static void __init of_ti_composite_gate_clk_setup(struct device_node *node) |
| 198 | { |
| 199 | _of_ti_composite_gate_clk_setup(node, &clkhwops_wait); |
| 200 | } |
| 201 | CLK_OF_DECLARE(ti_composite_gate_clk, "ti,composite-gate-clock", |
| 202 | of_ti_composite_gate_clk_setup); |
| 203 | |
| 204 | |
| 205 | static void __init of_ti_clkdm_gate_clk_setup(struct device_node *node) |
| 206 | { |
| 207 | _of_ti_gate_clk_setup(node, &omap_gate_clkdm_clk_ops, NULL); |
| 208 | } |
| 209 | CLK_OF_DECLARE(ti_clkdm_gate_clk, "ti,clkdm-gate-clock", |
| 210 | of_ti_clkdm_gate_clk_setup); |
| 211 | |
| 212 | static void __init of_ti_hsdiv_gate_clk_setup(struct device_node *node) |
| 213 | { |
| 214 | _of_ti_gate_clk_setup(node, &omap_gate_clk_hsdiv_restore_ops, |
| 215 | &clkhwops_wait); |
| 216 | } |
| 217 | CLK_OF_DECLARE(ti_hsdiv_gate_clk, "ti,hsdiv-gate-clock", |
| 218 | of_ti_hsdiv_gate_clk_setup); |
| 219 | |
| 220 | static void __init of_ti_gate_clk_setup(struct device_node *node) |
| 221 | { |
| 222 | _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, NULL); |
| 223 | } |
Rob Herring | 826d895 | 2014-05-12 11:41:19 -0500 | [diff] [blame] | 224 | CLK_OF_DECLARE(ti_gate_clk, "ti,gate-clock", of_ti_gate_clk_setup); |
Tero Kristo | f60b1ea | 2013-06-18 18:55:59 +0300 | [diff] [blame] | 225 | |
| 226 | static void __init of_ti_wait_gate_clk_setup(struct device_node *node) |
| 227 | { |
| 228 | _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, &clkhwops_wait); |
| 229 | } |
| 230 | CLK_OF_DECLARE(ti_wait_gate_clk, "ti,wait-gate-clock", |
| 231 | of_ti_wait_gate_clk_setup); |
| 232 | |
| 233 | #ifdef CONFIG_ARCH_OMAP3 |
| 234 | static void __init of_ti_am35xx_gate_clk_setup(struct device_node *node) |
| 235 | { |
| 236 | _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, |
| 237 | &clkhwops_am35xx_ipss_module_wait); |
| 238 | } |
| 239 | CLK_OF_DECLARE(ti_am35xx_gate_clk, "ti,am35xx-gate-clock", |
| 240 | of_ti_am35xx_gate_clk_setup); |
| 241 | |
| 242 | static void __init of_ti_dss_gate_clk_setup(struct device_node *node) |
| 243 | { |
| 244 | _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, |
| 245 | &clkhwops_omap3430es2_dss_usbhost_wait); |
| 246 | } |
| 247 | CLK_OF_DECLARE(ti_dss_gate_clk, "ti,dss-gate-clock", |
| 248 | of_ti_dss_gate_clk_setup); |
| 249 | #endif |