Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 and |
| 6 | * only version 2 as published by the Free Software Foundation. |
| 7 | * |
| 8 | * This program is distributed in the hope that it will be useful, |
| 9 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 10 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 11 | * GNU General Public License for more details. |
| 12 | * |
| 13 | */ |
| 14 | |
| 15 | #include "phy-qcom-ufs-i.h" |
| 16 | |
| 17 | #define MAX_PROP_NAME 32 |
| 18 | #define VDDA_PHY_MIN_UV 1000000 |
| 19 | #define VDDA_PHY_MAX_UV 1000000 |
| 20 | #define VDDA_PLL_MIN_UV 1800000 |
| 21 | #define VDDA_PLL_MAX_UV 1800000 |
| 22 | #define VDDP_REF_CLK_MIN_UV 1200000 |
| 23 | #define VDDP_REF_CLK_MAX_UV 1200000 |
| 24 | |
| 25 | static int __ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *, |
| 26 | const char *, bool); |
| 27 | static int ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *, |
| 28 | const char *); |
| 29 | static int ufs_qcom_phy_base_init(struct platform_device *pdev, |
| 30 | struct ufs_qcom_phy *phy_common); |
| 31 | |
| 32 | int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, |
| 33 | struct ufs_qcom_phy_calibration *tbl_A, |
| 34 | int tbl_size_A, |
| 35 | struct ufs_qcom_phy_calibration *tbl_B, |
| 36 | int tbl_size_B, bool is_rate_B) |
| 37 | { |
| 38 | int i; |
| 39 | int ret = 0; |
| 40 | |
| 41 | if (!tbl_A) { |
| 42 | dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__); |
| 43 | ret = EINVAL; |
| 44 | goto out; |
| 45 | } |
| 46 | |
| 47 | for (i = 0; i < tbl_size_A; i++) |
| 48 | writel_relaxed(tbl_A[i].cfg_value, |
| 49 | ufs_qcom_phy->mmio + tbl_A[i].reg_offset); |
| 50 | |
| 51 | /* |
| 52 | * In case we would like to work in rate B, we need |
| 53 | * to override a registers that were configured in rate A table |
| 54 | * with registers of rate B table. |
| 55 | * table. |
| 56 | */ |
| 57 | if (is_rate_B) { |
| 58 | if (!tbl_B) { |
| 59 | dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL", |
| 60 | __func__); |
| 61 | ret = EINVAL; |
| 62 | goto out; |
| 63 | } |
| 64 | |
| 65 | for (i = 0; i < tbl_size_B; i++) |
| 66 | writel_relaxed(tbl_B[i].cfg_value, |
| 67 | ufs_qcom_phy->mmio + tbl_B[i].reg_offset); |
| 68 | } |
| 69 | |
| 70 | /* flush buffered writes */ |
| 71 | mb(); |
| 72 | |
| 73 | out: |
| 74 | return ret; |
| 75 | } |
Axel Lin | 358d6c8 | 2015-03-23 11:54:50 +0800 | [diff] [blame] | 76 | EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate); |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 77 | |
| 78 | struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, |
| 79 | struct ufs_qcom_phy *common_cfg, |
Axel Lin | 4a9e5ca | 2015-07-15 15:33:51 +0800 | [diff] [blame] | 80 | const struct phy_ops *ufs_qcom_phy_gen_ops, |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 81 | struct ufs_qcom_phy_specific_ops *phy_spec_ops) |
| 82 | { |
| 83 | int err; |
| 84 | struct device *dev = &pdev->dev; |
| 85 | struct phy *generic_phy = NULL; |
| 86 | struct phy_provider *phy_provider; |
| 87 | |
| 88 | err = ufs_qcom_phy_base_init(pdev, common_cfg); |
| 89 | if (err) { |
| 90 | dev_err(dev, "%s: phy base init failed %d\n", __func__, err); |
| 91 | goto out; |
| 92 | } |
| 93 | |
| 94 | phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| 95 | if (IS_ERR(phy_provider)) { |
| 96 | err = PTR_ERR(phy_provider); |
| 97 | dev_err(dev, "%s: failed to register phy %d\n", __func__, err); |
| 98 | goto out; |
| 99 | } |
| 100 | |
| 101 | generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops); |
| 102 | if (IS_ERR(generic_phy)) { |
| 103 | err = PTR_ERR(generic_phy); |
| 104 | dev_err(dev, "%s: failed to create phy %d\n", __func__, err); |
Axel Lin | d89a7f6 | 2015-03-03 09:05:55 +0800 | [diff] [blame] | 105 | generic_phy = NULL; |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 106 | goto out; |
| 107 | } |
| 108 | |
| 109 | common_cfg->phy_spec_ops = phy_spec_ops; |
| 110 | common_cfg->dev = dev; |
| 111 | |
| 112 | out: |
| 113 | return generic_phy; |
| 114 | } |
Axel Lin | 358d6c8 | 2015-03-23 11:54:50 +0800 | [diff] [blame] | 115 | EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe); |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 116 | |
| 117 | /* |
| 118 | * This assumes the embedded phy structure inside generic_phy is of type |
| 119 | * struct ufs_qcom_phy. In order to function properly it's crucial |
| 120 | * to keep the embedded struct "struct ufs_qcom_phy common_cfg" |
| 121 | * as the first inside generic_phy. |
| 122 | */ |
| 123 | struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy) |
| 124 | { |
| 125 | return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy); |
| 126 | } |
Axel Lin | 358d6c8 | 2015-03-23 11:54:50 +0800 | [diff] [blame] | 127 | EXPORT_SYMBOL_GPL(get_ufs_qcom_phy); |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 128 | |
| 129 | static |
| 130 | int ufs_qcom_phy_base_init(struct platform_device *pdev, |
| 131 | struct ufs_qcom_phy *phy_common) |
| 132 | { |
| 133 | struct device *dev = &pdev->dev; |
| 134 | struct resource *res; |
| 135 | int err = 0; |
| 136 | |
| 137 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem"); |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 138 | phy_common->mmio = devm_ioremap_resource(dev, res); |
| 139 | if (IS_ERR((void const *)phy_common->mmio)) { |
| 140 | err = PTR_ERR((void const *)phy_common->mmio); |
| 141 | phy_common->mmio = NULL; |
| 142 | dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n", |
| 143 | __func__, err); |
Axel Lin | 52ea796 | 2015-03-23 12:08:18 +0800 | [diff] [blame] | 144 | return err; |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 145 | } |
| 146 | |
| 147 | /* "dev_ref_clk_ctrl_mem" is optional resource */ |
| 148 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| 149 | "dev_ref_clk_ctrl_mem"); |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 150 | phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res); |
Axel Lin | 52ea796 | 2015-03-23 12:08:18 +0800 | [diff] [blame] | 151 | if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 152 | phy_common->dev_ref_clk_ctrl_mmio = NULL; |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 153 | |
Axel Lin | 52ea796 | 2015-03-23 12:08:18 +0800 | [diff] [blame] | 154 | return 0; |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 155 | } |
| 156 | |
| 157 | static int __ufs_qcom_phy_clk_get(struct phy *phy, |
| 158 | const char *name, struct clk **clk_out, bool err_print) |
| 159 | { |
| 160 | struct clk *clk; |
| 161 | int err = 0; |
| 162 | struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); |
| 163 | struct device *dev = ufs_qcom_phy->dev; |
| 164 | |
| 165 | clk = devm_clk_get(dev, name); |
| 166 | if (IS_ERR(clk)) { |
| 167 | err = PTR_ERR(clk); |
| 168 | if (err_print) |
| 169 | dev_err(dev, "failed to get %s err %d", name, err); |
| 170 | } else { |
| 171 | *clk_out = clk; |
| 172 | } |
| 173 | |
| 174 | return err; |
| 175 | } |
| 176 | |
| 177 | static |
| 178 | int ufs_qcom_phy_clk_get(struct phy *phy, |
| 179 | const char *name, struct clk **clk_out) |
| 180 | { |
| 181 | return __ufs_qcom_phy_clk_get(phy, name, clk_out, true); |
| 182 | } |
| 183 | |
| 184 | int |
| 185 | ufs_qcom_phy_init_clks(struct phy *generic_phy, |
| 186 | struct ufs_qcom_phy *phy_common) |
| 187 | { |
| 188 | int err; |
| 189 | |
| 190 | err = ufs_qcom_phy_clk_get(generic_phy, "tx_iface_clk", |
| 191 | &phy_common->tx_iface_clk); |
| 192 | if (err) |
| 193 | goto out; |
| 194 | |
| 195 | err = ufs_qcom_phy_clk_get(generic_phy, "rx_iface_clk", |
| 196 | &phy_common->rx_iface_clk); |
| 197 | if (err) |
| 198 | goto out; |
| 199 | |
| 200 | err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk_src", |
| 201 | &phy_common->ref_clk_src); |
| 202 | if (err) |
| 203 | goto out; |
| 204 | |
| 205 | /* |
| 206 | * "ref_clk_parent" is optional hence don't abort init if it's not |
| 207 | * found. |
| 208 | */ |
| 209 | __ufs_qcom_phy_clk_get(generic_phy, "ref_clk_parent", |
| 210 | &phy_common->ref_clk_parent, false); |
| 211 | |
| 212 | err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk", |
| 213 | &phy_common->ref_clk); |
| 214 | |
| 215 | out: |
| 216 | return err; |
| 217 | } |
Axel Lin | 358d6c8 | 2015-03-23 11:54:50 +0800 | [diff] [blame] | 218 | EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_clks); |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 219 | |
| 220 | int |
| 221 | ufs_qcom_phy_init_vregulators(struct phy *generic_phy, |
| 222 | struct ufs_qcom_phy *phy_common) |
| 223 | { |
| 224 | int err; |
| 225 | |
| 226 | err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_pll, |
| 227 | "vdda-pll"); |
| 228 | if (err) |
| 229 | goto out; |
| 230 | |
| 231 | err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_phy, |
| 232 | "vdda-phy"); |
| 233 | |
| 234 | if (err) |
| 235 | goto out; |
| 236 | |
| 237 | /* vddp-ref-clk-* properties are optional */ |
| 238 | __ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vddp_ref_clk, |
| 239 | "vddp-ref-clk", true); |
| 240 | out: |
| 241 | return err; |
| 242 | } |
Axel Lin | 358d6c8 | 2015-03-23 11:54:50 +0800 | [diff] [blame] | 243 | EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_vregulators); |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 244 | |
| 245 | static int __ufs_qcom_phy_init_vreg(struct phy *phy, |
| 246 | struct ufs_qcom_phy_vreg *vreg, const char *name, bool optional) |
| 247 | { |
| 248 | int err = 0; |
| 249 | struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); |
| 250 | struct device *dev = ufs_qcom_phy->dev; |
| 251 | |
| 252 | char prop_name[MAX_PROP_NAME]; |
| 253 | |
| 254 | vreg->name = kstrdup(name, GFP_KERNEL); |
| 255 | if (!vreg->name) { |
| 256 | err = -ENOMEM; |
| 257 | goto out; |
| 258 | } |
| 259 | |
| 260 | vreg->reg = devm_regulator_get(dev, name); |
| 261 | if (IS_ERR(vreg->reg)) { |
| 262 | err = PTR_ERR(vreg->reg); |
| 263 | vreg->reg = NULL; |
| 264 | if (!optional) |
| 265 | dev_err(dev, "failed to get %s, %d\n", name, err); |
| 266 | goto out; |
| 267 | } |
| 268 | |
| 269 | if (dev->of_node) { |
| 270 | snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name); |
| 271 | err = of_property_read_u32(dev->of_node, |
| 272 | prop_name, &vreg->max_uA); |
| 273 | if (err && err != -EINVAL) { |
| 274 | dev_err(dev, "%s: failed to read %s\n", |
| 275 | __func__, prop_name); |
| 276 | goto out; |
| 277 | } else if (err == -EINVAL || !vreg->max_uA) { |
| 278 | if (regulator_count_voltages(vreg->reg) > 0) { |
| 279 | dev_err(dev, "%s: %s is mandatory\n", |
| 280 | __func__, prop_name); |
| 281 | goto out; |
| 282 | } |
| 283 | err = 0; |
| 284 | } |
| 285 | snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name); |
| 286 | if (of_get_property(dev->of_node, prop_name, NULL)) |
| 287 | vreg->is_always_on = true; |
| 288 | else |
| 289 | vreg->is_always_on = false; |
| 290 | } |
| 291 | |
| 292 | if (!strcmp(name, "vdda-pll")) { |
| 293 | vreg->max_uV = VDDA_PLL_MAX_UV; |
| 294 | vreg->min_uV = VDDA_PLL_MIN_UV; |
| 295 | } else if (!strcmp(name, "vdda-phy")) { |
| 296 | vreg->max_uV = VDDA_PHY_MAX_UV; |
| 297 | vreg->min_uV = VDDA_PHY_MIN_UV; |
| 298 | } else if (!strcmp(name, "vddp-ref-clk")) { |
| 299 | vreg->max_uV = VDDP_REF_CLK_MAX_UV; |
| 300 | vreg->min_uV = VDDP_REF_CLK_MIN_UV; |
| 301 | } |
| 302 | |
| 303 | out: |
| 304 | if (err) |
| 305 | kfree(vreg->name); |
| 306 | return err; |
| 307 | } |
| 308 | |
| 309 | static int ufs_qcom_phy_init_vreg(struct phy *phy, |
| 310 | struct ufs_qcom_phy_vreg *vreg, const char *name) |
| 311 | { |
| 312 | return __ufs_qcom_phy_init_vreg(phy, vreg, name, false); |
| 313 | } |
| 314 | |
| 315 | static |
| 316 | int ufs_qcom_phy_cfg_vreg(struct phy *phy, |
| 317 | struct ufs_qcom_phy_vreg *vreg, bool on) |
| 318 | { |
| 319 | int ret = 0; |
| 320 | struct regulator *reg = vreg->reg; |
| 321 | const char *name = vreg->name; |
| 322 | int min_uV; |
| 323 | int uA_load; |
| 324 | struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); |
| 325 | struct device *dev = ufs_qcom_phy->dev; |
| 326 | |
| 327 | BUG_ON(!vreg); |
| 328 | |
| 329 | if (regulator_count_voltages(reg) > 0) { |
| 330 | min_uV = on ? vreg->min_uV : 0; |
| 331 | ret = regulator_set_voltage(reg, min_uV, vreg->max_uV); |
| 332 | if (ret) { |
| 333 | dev_err(dev, "%s: %s set voltage failed, err=%d\n", |
| 334 | __func__, name, ret); |
| 335 | goto out; |
| 336 | } |
| 337 | uA_load = on ? vreg->max_uA : 0; |
Stephen Rothwell | 7e476c7 | 2015-03-10 13:44:41 +1100 | [diff] [blame] | 338 | ret = regulator_set_load(reg, uA_load); |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 339 | if (ret >= 0) { |
| 340 | /* |
Stephen Rothwell | 7e476c7 | 2015-03-10 13:44:41 +1100 | [diff] [blame] | 341 | * regulator_set_load() returns new regulator |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 342 | * mode upon success. |
| 343 | */ |
| 344 | ret = 0; |
| 345 | } else { |
| 346 | dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n", |
| 347 | __func__, name, uA_load, ret); |
| 348 | goto out; |
| 349 | } |
| 350 | } |
| 351 | out: |
| 352 | return ret; |
| 353 | } |
| 354 | |
| 355 | static |
| 356 | int ufs_qcom_phy_enable_vreg(struct phy *phy, |
| 357 | struct ufs_qcom_phy_vreg *vreg) |
| 358 | { |
| 359 | struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); |
| 360 | struct device *dev = ufs_qcom_phy->dev; |
| 361 | int ret = 0; |
| 362 | |
| 363 | if (!vreg || vreg->enabled) |
| 364 | goto out; |
| 365 | |
| 366 | ret = ufs_qcom_phy_cfg_vreg(phy, vreg, true); |
| 367 | if (ret) { |
| 368 | dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n", |
| 369 | __func__, ret); |
| 370 | goto out; |
| 371 | } |
| 372 | |
| 373 | ret = regulator_enable(vreg->reg); |
| 374 | if (ret) { |
| 375 | dev_err(dev, "%s: enable failed, err=%d\n", |
| 376 | __func__, ret); |
| 377 | goto out; |
| 378 | } |
| 379 | |
| 380 | vreg->enabled = true; |
| 381 | out: |
| 382 | return ret; |
| 383 | } |
| 384 | |
| 385 | int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy) |
| 386 | { |
| 387 | int ret = 0; |
| 388 | struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); |
| 389 | |
| 390 | if (phy->is_ref_clk_enabled) |
| 391 | goto out; |
| 392 | |
| 393 | /* |
| 394 | * reference clock is propagated in a daisy-chained manner from |
| 395 | * source to phy, so ungate them at each stage. |
| 396 | */ |
| 397 | ret = clk_prepare_enable(phy->ref_clk_src); |
| 398 | if (ret) { |
| 399 | dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n", |
| 400 | __func__, ret); |
| 401 | goto out; |
| 402 | } |
| 403 | |
| 404 | /* |
| 405 | * "ref_clk_parent" is optional clock hence make sure that clk reference |
| 406 | * is available before trying to enable the clock. |
| 407 | */ |
| 408 | if (phy->ref_clk_parent) { |
| 409 | ret = clk_prepare_enable(phy->ref_clk_parent); |
| 410 | if (ret) { |
| 411 | dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n", |
| 412 | __func__, ret); |
| 413 | goto out_disable_src; |
| 414 | } |
| 415 | } |
| 416 | |
| 417 | ret = clk_prepare_enable(phy->ref_clk); |
| 418 | if (ret) { |
| 419 | dev_err(phy->dev, "%s: ref_clk enable failed %d\n", |
| 420 | __func__, ret); |
| 421 | goto out_disable_parent; |
| 422 | } |
| 423 | |
| 424 | phy->is_ref_clk_enabled = true; |
| 425 | goto out; |
| 426 | |
| 427 | out_disable_parent: |
| 428 | if (phy->ref_clk_parent) |
| 429 | clk_disable_unprepare(phy->ref_clk_parent); |
| 430 | out_disable_src: |
| 431 | clk_disable_unprepare(phy->ref_clk_src); |
| 432 | out: |
| 433 | return ret; |
| 434 | } |
| 435 | |
| 436 | static |
| 437 | int ufs_qcom_phy_disable_vreg(struct phy *phy, |
| 438 | struct ufs_qcom_phy_vreg *vreg) |
| 439 | { |
| 440 | struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); |
| 441 | struct device *dev = ufs_qcom_phy->dev; |
| 442 | int ret = 0; |
| 443 | |
| 444 | if (!vreg || !vreg->enabled || vreg->is_always_on) |
| 445 | goto out; |
| 446 | |
| 447 | ret = regulator_disable(vreg->reg); |
| 448 | |
| 449 | if (!ret) { |
| 450 | /* ignore errors on applying disable config */ |
| 451 | ufs_qcom_phy_cfg_vreg(phy, vreg, false); |
| 452 | vreg->enabled = false; |
| 453 | } else { |
| 454 | dev_err(dev, "%s: %s disable failed, err=%d\n", |
| 455 | __func__, vreg->name, ret); |
| 456 | } |
| 457 | out: |
| 458 | return ret; |
| 459 | } |
| 460 | |
| 461 | void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy) |
| 462 | { |
| 463 | struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); |
| 464 | |
| 465 | if (phy->is_ref_clk_enabled) { |
| 466 | clk_disable_unprepare(phy->ref_clk); |
| 467 | /* |
| 468 | * "ref_clk_parent" is optional clock hence make sure that clk |
| 469 | * reference is available before trying to disable the clock. |
| 470 | */ |
| 471 | if (phy->ref_clk_parent) |
| 472 | clk_disable_unprepare(phy->ref_clk_parent); |
| 473 | clk_disable_unprepare(phy->ref_clk_src); |
| 474 | phy->is_ref_clk_enabled = false; |
| 475 | } |
| 476 | } |
| 477 | |
| 478 | #define UFS_REF_CLK_EN (1 << 5) |
| 479 | |
| 480 | static void ufs_qcom_phy_dev_ref_clk_ctrl(struct phy *generic_phy, bool enable) |
| 481 | { |
| 482 | struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); |
| 483 | |
| 484 | if (phy->dev_ref_clk_ctrl_mmio && |
| 485 | (enable ^ phy->is_dev_ref_clk_enabled)) { |
| 486 | u32 temp = readl_relaxed(phy->dev_ref_clk_ctrl_mmio); |
| 487 | |
| 488 | if (enable) |
| 489 | temp |= UFS_REF_CLK_EN; |
| 490 | else |
| 491 | temp &= ~UFS_REF_CLK_EN; |
| 492 | |
| 493 | /* |
| 494 | * If we are here to disable this clock immediately after |
| 495 | * entering into hibern8, we need to make sure that device |
| 496 | * ref_clk is active atleast 1us after the hibern8 enter. |
| 497 | */ |
| 498 | if (!enable) |
| 499 | udelay(1); |
| 500 | |
| 501 | writel_relaxed(temp, phy->dev_ref_clk_ctrl_mmio); |
| 502 | /* ensure that ref_clk is enabled/disabled before we return */ |
| 503 | wmb(); |
| 504 | /* |
| 505 | * If we call hibern8 exit after this, we need to make sure that |
| 506 | * device ref_clk is stable for atleast 1us before the hibern8 |
| 507 | * exit command. |
| 508 | */ |
| 509 | if (enable) |
| 510 | udelay(1); |
| 511 | |
| 512 | phy->is_dev_ref_clk_enabled = enable; |
| 513 | } |
| 514 | } |
| 515 | |
| 516 | void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy) |
| 517 | { |
| 518 | ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true); |
| 519 | } |
| 520 | |
| 521 | void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy) |
| 522 | { |
| 523 | ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false); |
| 524 | } |
| 525 | |
| 526 | /* Turn ON M-PHY RMMI interface clocks */ |
| 527 | int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy) |
| 528 | { |
| 529 | struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); |
| 530 | int ret = 0; |
| 531 | |
| 532 | if (phy->is_iface_clk_enabled) |
| 533 | goto out; |
| 534 | |
| 535 | ret = clk_prepare_enable(phy->tx_iface_clk); |
| 536 | if (ret) { |
| 537 | dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n", |
| 538 | __func__, ret); |
| 539 | goto out; |
| 540 | } |
| 541 | ret = clk_prepare_enable(phy->rx_iface_clk); |
| 542 | if (ret) { |
| 543 | clk_disable_unprepare(phy->tx_iface_clk); |
| 544 | dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n", |
| 545 | __func__, ret); |
| 546 | goto out; |
| 547 | } |
| 548 | phy->is_iface_clk_enabled = true; |
| 549 | |
| 550 | out: |
| 551 | return ret; |
| 552 | } |
| 553 | |
| 554 | /* Turn OFF M-PHY RMMI interface clocks */ |
| 555 | void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy) |
| 556 | { |
| 557 | struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); |
| 558 | |
| 559 | if (phy->is_iface_clk_enabled) { |
| 560 | clk_disable_unprepare(phy->tx_iface_clk); |
| 561 | clk_disable_unprepare(phy->rx_iface_clk); |
| 562 | phy->is_iface_clk_enabled = false; |
| 563 | } |
| 564 | } |
| 565 | |
| 566 | int ufs_qcom_phy_start_serdes(struct phy *generic_phy) |
| 567 | { |
| 568 | struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| 569 | int ret = 0; |
| 570 | |
| 571 | if (!ufs_qcom_phy->phy_spec_ops->start_serdes) { |
| 572 | dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n", |
| 573 | __func__); |
| 574 | ret = -ENOTSUPP; |
| 575 | } else { |
| 576 | ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy); |
| 577 | } |
| 578 | |
| 579 | return ret; |
| 580 | } |
| 581 | |
| 582 | int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes) |
| 583 | { |
| 584 | struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| 585 | int ret = 0; |
| 586 | |
| 587 | if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) { |
| 588 | dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable() callback is not supported\n", |
| 589 | __func__); |
| 590 | ret = -ENOTSUPP; |
| 591 | } else { |
| 592 | ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy, |
| 593 | tx_lanes); |
| 594 | } |
| 595 | |
| 596 | return ret; |
| 597 | } |
| 598 | |
| 599 | void ufs_qcom_phy_save_controller_version(struct phy *generic_phy, |
| 600 | u8 major, u16 minor, u16 step) |
| 601 | { |
| 602 | struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| 603 | |
| 604 | ufs_qcom_phy->host_ctrl_rev_major = major; |
| 605 | ufs_qcom_phy->host_ctrl_rev_minor = minor; |
| 606 | ufs_qcom_phy->host_ctrl_rev_step = step; |
| 607 | } |
| 608 | |
| 609 | int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B) |
| 610 | { |
| 611 | struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| 612 | int ret = 0; |
| 613 | |
| 614 | if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) { |
| 615 | dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not supported\n", |
| 616 | __func__); |
| 617 | ret = -ENOTSUPP; |
| 618 | } else { |
| 619 | ret = ufs_qcom_phy->phy_spec_ops-> |
| 620 | calibrate_phy(ufs_qcom_phy, is_rate_B); |
| 621 | if (ret) |
| 622 | dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n", |
| 623 | __func__, ret); |
| 624 | } |
| 625 | |
| 626 | return ret; |
| 627 | } |
| 628 | |
| 629 | int ufs_qcom_phy_remove(struct phy *generic_phy, |
| 630 | struct ufs_qcom_phy *ufs_qcom_phy) |
| 631 | { |
| 632 | phy_power_off(generic_phy); |
| 633 | |
| 634 | kfree(ufs_qcom_phy->vdda_pll.name); |
| 635 | kfree(ufs_qcom_phy->vdda_phy.name); |
| 636 | |
| 637 | return 0; |
| 638 | } |
Axel Lin | 358d6c8 | 2015-03-23 11:54:50 +0800 | [diff] [blame] | 639 | EXPORT_SYMBOL_GPL(ufs_qcom_phy_remove); |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 640 | |
| 641 | int ufs_qcom_phy_exit(struct phy *generic_phy) |
| 642 | { |
| 643 | struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| 644 | |
| 645 | if (ufs_qcom_phy->is_powered_on) |
| 646 | phy_power_off(generic_phy); |
| 647 | |
| 648 | return 0; |
| 649 | } |
Axel Lin | 358d6c8 | 2015-03-23 11:54:50 +0800 | [diff] [blame] | 650 | EXPORT_SYMBOL_GPL(ufs_qcom_phy_exit); |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 651 | |
| 652 | int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy) |
| 653 | { |
| 654 | struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); |
| 655 | |
| 656 | if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) { |
| 657 | dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n", |
| 658 | __func__); |
| 659 | return -ENOTSUPP; |
| 660 | } |
| 661 | |
| 662 | return ufs_qcom_phy->phy_spec_ops-> |
| 663 | is_physical_coding_sublayer_ready(ufs_qcom_phy); |
| 664 | } |
| 665 | |
| 666 | int ufs_qcom_phy_power_on(struct phy *generic_phy) |
| 667 | { |
| 668 | struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); |
| 669 | struct device *dev = phy_common->dev; |
| 670 | int err; |
| 671 | |
| 672 | err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_phy); |
| 673 | if (err) { |
| 674 | dev_err(dev, "%s enable vdda_phy failed, err=%d\n", |
| 675 | __func__, err); |
| 676 | goto out; |
| 677 | } |
| 678 | |
| 679 | phy_common->phy_spec_ops->power_control(phy_common, true); |
| 680 | |
| 681 | /* vdda_pll also enables ref clock LDOs so enable it first */ |
| 682 | err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_pll); |
| 683 | if (err) { |
| 684 | dev_err(dev, "%s enable vdda_pll failed, err=%d\n", |
| 685 | __func__, err); |
| 686 | goto out_disable_phy; |
| 687 | } |
| 688 | |
| 689 | err = ufs_qcom_phy_enable_ref_clk(generic_phy); |
| 690 | if (err) { |
| 691 | dev_err(dev, "%s enable phy ref clock failed, err=%d\n", |
| 692 | __func__, err); |
| 693 | goto out_disable_pll; |
| 694 | } |
| 695 | |
| 696 | /* enable device PHY ref_clk pad rail */ |
| 697 | if (phy_common->vddp_ref_clk.reg) { |
| 698 | err = ufs_qcom_phy_enable_vreg(generic_phy, |
| 699 | &phy_common->vddp_ref_clk); |
| 700 | if (err) { |
| 701 | dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n", |
| 702 | __func__, err); |
| 703 | goto out_disable_ref_clk; |
| 704 | } |
| 705 | } |
| 706 | |
| 707 | phy_common->is_powered_on = true; |
| 708 | goto out; |
| 709 | |
| 710 | out_disable_ref_clk: |
| 711 | ufs_qcom_phy_disable_ref_clk(generic_phy); |
| 712 | out_disable_pll: |
| 713 | ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll); |
| 714 | out_disable_phy: |
| 715 | ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy); |
| 716 | out: |
| 717 | return err; |
| 718 | } |
Axel Lin | 358d6c8 | 2015-03-23 11:54:50 +0800 | [diff] [blame] | 719 | EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_on); |
Yaniv Gardi | adaafaa | 2015-01-15 16:32:35 +0200 | [diff] [blame] | 720 | |
| 721 | int ufs_qcom_phy_power_off(struct phy *generic_phy) |
| 722 | { |
| 723 | struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); |
| 724 | |
| 725 | phy_common->phy_spec_ops->power_control(phy_common, false); |
| 726 | |
| 727 | if (phy_common->vddp_ref_clk.reg) |
| 728 | ufs_qcom_phy_disable_vreg(generic_phy, |
| 729 | &phy_common->vddp_ref_clk); |
| 730 | ufs_qcom_phy_disable_ref_clk(generic_phy); |
| 731 | |
| 732 | ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll); |
| 733 | ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy); |
| 734 | phy_common->is_powered_on = false; |
| 735 | |
| 736 | return 0; |
| 737 | } |
Axel Lin | 358d6c8 | 2015-03-23 11:54:50 +0800 | [diff] [blame] | 738 | EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off); |