| Ariel D'Alessandro | 4020d07 | 2015-12-07 10:57:27 +0000 | [diff] [blame] | 1 | * NXP LPC18xx EEPROM memory NVMEM driver |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible: Should be "nxp,lpc1857-eeprom" |
| 5 | - reg: Must contain an entry with the physical base address and length |
| 6 | for each entry in reg-names. |
| 7 | - reg-names: Must include the following entries. |
| 8 | - reg: EEPROM registers. |
| 9 | - mem: EEPROM address space. |
| 10 | - clocks: Must contain an entry for each entry in clock-names. |
| 11 | - clock-names: Must include the following entries. |
| 12 | - eeprom: EEPROM operating clock. |
| 13 | - resets: Should contain a reference to the reset controller asserting |
| 14 | the EEPROM in reset. |
| 15 | - interrupts: Should contain EEPROM interrupt. |
| 16 | |
| 17 | Example: |
| 18 | |
| 19 | eeprom: eeprom@4000e000 { |
| 20 | compatible = "nxp,lpc1857-eeprom"; |
| 21 | reg = <0x4000e000 0x1000>, |
| 22 | <0x20040000 0x4000>; |
| 23 | reg-names = "reg", "mem"; |
| 24 | clocks = <&ccu1 CLK_CPU_EEPROM>; |
| 25 | clock-names = "eeprom"; |
| 26 | resets = <&rgu 27>; |
| 27 | interrupts = <4>; |
| 28 | }; |