blob: 64779e70408f9e8a0d25c0973a5f39558b70471d [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
3 *
4 * Modified to new api Jan 2001 by James Simmons (jsimmons@transvirtual.com)
5 *
6 * Created 28 Dec 1997 by Geert Uytterhoeven
7 *
8 *
9 * I have started rewriting this driver as a example of the upcoming new API
10 * The primary goal is to remove the console code from fbdev and place it
11 * into fbcon.c. This reduces the code and makes writing a new fbdev driver
12 * easy since the author doesn't need to worry about console internals. It
13 * also allows the ability to run fbdev without a console/tty system on top
14 * of it.
15 *
16 * First the roles of struct fb_info and struct display have changed. Struct
Michael Opdenacker59c51592007-05-09 08:57:56 +020017 * display will go away. The way the new framebuffer console code will
Linus Torvalds1da177e2005-04-16 15:20:36 -070018 * work is that it will act to translate data about the tty/console in
19 * struct vc_data to data in a device independent way in struct fb_info. Then
20 * various functions in struct fb_ops will be called to store the device
21 * dependent state in the par field in struct fb_info and to change the
22 * hardware to that state. This allows a very clean separation of the fbdev
23 * layer from the console layer. It also allows one to use fbdev on its own
24 * which is a bounus for embedded devices. The reason this approach works is
25 * for each framebuffer device when used as a tty/console device is allocated
26 * a set of virtual terminals to it. Only one virtual terminal can be active
27 * per framebuffer device. We already have all the data we need in struct
28 * vc_data so why store a bunch of colormaps and other fbdev specific data
29 * per virtual terminal.
30 *
31 * As you can see doing this makes the con parameter pretty much useless
32 * for struct fb_ops functions, as it should be. Also having struct
33 * fb_var_screeninfo and other data in fb_info pretty much eliminates the
34 * need for get_fix and get_var. Once all drivers use the fix, var, and cmap
35 * fbcon can be written around these fields. This will also eliminate the
36 * need to regenerate struct fb_var_screeninfo, struct fb_fix_screeninfo
37 * struct fb_cmap every time get_var, get_fix, get_cmap functions are called
38 * as many drivers do now.
39 *
40 * This file is subject to the terms and conditions of the GNU General Public
41 * License. See the file COPYING in the main directory of this archive for
42 * more details.
43 */
44
45#include <linux/module.h>
46#include <linux/kernel.h>
47#include <linux/errno.h>
48#include <linux/string.h>
49#include <linux/mm.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070050#include <linux/slab.h>
51#include <linux/delay.h>
52#include <linux/fb.h>
53#include <linux/init.h>
Krzysztof Helt36cc5352007-05-08 00:38:25 -070054#include <linux/pci.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070055
56 /*
57 * This is just simple sample code.
58 *
59 * No warranty that it actually compiles.
60 * Even less warranty that it actually works :-)
61 */
62
63/*
Krzysztof Helt36cc5352007-05-08 00:38:25 -070064 * Driver data
65 */
66static char *mode_option __devinitdata;
67
68/*
Linus Torvalds1da177e2005-04-16 15:20:36 -070069 * If your driver supports multiple boards, you should make the
70 * below data types arrays, or allocate them dynamically (using kmalloc()).
71 */
72
73/*
74 * This structure defines the hardware state of the graphics card. Normally
75 * you place this in a header file in linux/include/video. This file usually
76 * also includes register information. That allows other driver subsystems
77 * and userland applications the ability to use the same header file to
78 * avoid duplicate work and easy porting of software.
79 */
80struct xxx_par;
81
82/*
83 * Here we define the default structs fb_fix_screeninfo and fb_var_screeninfo
84 * if we don't use modedb. If we do use modedb see xxxfb_init how to use it
85 * to get a fb_var_screeninfo. Otherwise define a default var as well.
86 */
Krzysztof Helt19c1a8b2007-05-08 00:40:14 -070087static struct fb_fix_screeninfo xxxfb_fix __devinitdata = {
Linus Torvalds1da177e2005-04-16 15:20:36 -070088 .id = "FB's name",
89 .type = FB_TYPE_PACKED_PIXELS,
90 .visual = FB_VISUAL_PSEUDOCOLOR,
91 .xpanstep = 1,
92 .ypanstep = 1,
93 .ywrapstep = 1,
94 .accel = FB_ACCEL_NONE,
95};
96
97 /*
98 * Modern graphical hardware not only supports pipelines but some
99 * also support multiple monitors where each display can have its
100 * its own unique data. In this case each display could be
101 * represented by a separate framebuffer device thus a separate
102 * struct fb_info. Now the struct xxx_par represents the graphics
103 * hardware state thus only one exist per card. In this case the
104 * struct xxx_par for each graphics card would be shared between
105 * every struct fb_info that represents a framebuffer on that card.
106 * This allows when one display changes it video resolution (info->var)
107 * the other displays know instantly. Each display can always be
108 * aware of the entire hardware state that affects it because they share
109 * the same xxx_par struct. The other side of the coin is multiple
110 * graphics cards that pass data around until it is finally displayed
111 * on one monitor. Such examples are the voodoo 1 cards and high end
112 * NUMA graphics servers. For this case we have a bunch of pars, each
113 * one that represents a graphics state, that belong to one struct
114 * fb_info. Their you would want to have *par point to a array of device
115 * states and have each struct fb_ops function deal with all those
116 * states. I hope this covers every possible hardware design. If not
117 * feel free to send your ideas at jsimmons@users.sf.net
118 */
119
120 /*
121 * If your driver supports multiple boards or it supports multiple
122 * framebuffers, you should make these arrays, or allocate them
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800123 * dynamically using framebuffer_alloc() and free them with
124 * framebuffer_release().
Linus Torvalds1da177e2005-04-16 15:20:36 -0700125 */
126static struct fb_info info;
127
128 /*
129 * Each one represents the state of the hardware. Most hardware have
130 * just one hardware state. These here represent the default state(s).
131 */
132static struct xxx_par __initdata current_par;
133
134int xxxfb_init(void);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135
136/**
137 * xxxfb_open - Optional function. Called when the framebuffer is
138 * first accessed.
139 * @info: frame buffer structure that represents a single frame buffer
140 * @user: tell us if the userland (value=1) or the console is accessing
141 * the framebuffer.
142 *
143 * This function is the first function called in the framebuffer api.
144 * Usually you don't need to provide this function. The case where it
145 * is used is to change from a text mode hardware state to a graphics
146 * mode state.
147 *
148 * Returns negative errno on error, or zero on success.
149 */
Krzysztof Helt4c7bf382007-05-08 00:40:10 -0700150static int xxxfb_open(struct fb_info *info, int user)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700151{
152 return 0;
153}
154
155/**
156 * xxxfb_release - Optional function. Called when the framebuffer
157 * device is closed.
158 * @info: frame buffer structure that represents a single frame buffer
159 * @user: tell us if the userland (value=1) or the console is accessing
160 * the framebuffer.
161 *
162 * Thus function is called when we close /dev/fb or the framebuffer
163 * console system is released. Usually you don't need this function.
164 * The case where it is usually used is to go from a graphics state
165 * to a text mode state.
166 *
167 * Returns negative errno on error, or zero on success.
168 */
Krzysztof Helt4c7bf382007-05-08 00:40:10 -0700169static int xxxfb_release(struct fb_info *info, int user)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700170{
171 return 0;
172}
173
174/**
175 * xxxfb_check_var - Optional function. Validates a var passed in.
176 * @var: frame buffer variable screen structure
177 * @info: frame buffer structure that represents a single frame buffer
178 *
179 * Checks to see if the hardware supports the state requested by
180 * var passed in. This function does not alter the hardware state!!!
181 * This means the data stored in struct fb_info and struct xxx_par do
182 * not change. This includes the var inside of struct fb_info.
183 * Do NOT change these. This function can be called on its own if we
184 * intent to only test a mode and not actually set it. The stuff in
185 * modedb.c is a example of this. If the var passed in is slightly
186 * off by what the hardware can support then we alter the var PASSED in
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800187 * to what we can do.
188 *
189 * For values that are off, this function must round them _up_ to the
190 * next value that is supported by the hardware. If the value is
191 * greater than the highest value supported by the hardware, then this
192 * function must return -EINVAL.
193 *
194 * Exception to the above rule: Some drivers have a fixed mode, ie,
195 * the hardware is already set at boot up, and cannot be changed. In
196 * this case, it is more acceptable that this function just return
197 * a copy of the currently working var (info->var). Better is to not
198 * implement this function, as the upper layer will do the copying
199 * of the current var for you.
200 *
201 * Note: This is the only function where the contents of var can be
202 * freely adjusted after the driver has been registered. If you find
203 * that you have code outside of this function that alters the content
204 * of var, then you are doing something wrong. Note also that the
205 * contents of info->var must be left untouched at all times after
206 * driver registration.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700207 *
208 * Returns negative errno on error, or zero on success.
209 */
210static int xxxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
211{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700212 /* ... */
213 return 0;
214}
215
216/**
217 * xxxfb_set_par - Optional function. Alters the hardware state.
218 * @info: frame buffer structure that represents a single frame buffer
219 *
220 * Using the fb_var_screeninfo in fb_info we set the resolution of the
221 * this particular framebuffer. This function alters the par AND the
222 * fb_fix_screeninfo stored in fb_info. It doesn't not alter var in
223 * fb_info since we are using that data. This means we depend on the
224 * data in var inside fb_info to be supported by the hardware.
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800225 *
226 * This function is also used to recover/restore the hardware to a
227 * known working state.
228 *
229 * xxxfb_check_var is always called before xxxfb_set_par to ensure that
230 * the contents of var is always valid.
231 *
Linus Torvalds1da177e2005-04-16 15:20:36 -0700232 * Again if you can't change the resolution you don't need this function.
233 *
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800234 * However, even if your hardware does not support mode changing,
235 * a set_par might be needed to at least initialize the hardware to
236 * a known working state, especially if it came back from another
237 * process that also modifies the same hardware, such as X.
238 *
239 * If this is the case, a combination such as the following should work:
240 *
241 * static int xxxfb_check_var(struct fb_var_screeninfo *var,
242 * struct fb_info *info)
243 * {
244 * *var = info->var;
245 * return 0;
246 * }
247 *
248 * static int xxxfb_set_par(struct fb_info *info)
249 * {
250 * init your hardware here
251 * }
252 *
Linus Torvalds1da177e2005-04-16 15:20:36 -0700253 * Returns negative errno on error, or zero on success.
254 */
255static int xxxfb_set_par(struct fb_info *info)
256{
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800257 struct xxx_par *par = info->par;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700258 /* ... */
259 return 0;
260}
261
262/**
263 * xxxfb_setcolreg - Optional function. Sets a color register.
264 * @regno: Which register in the CLUT we are programming
265 * @red: The red value which can be up to 16 bits wide
266 * @green: The green value which can be up to 16 bits wide
267 * @blue: The blue value which can be up to 16 bits wide.
268 * @transp: If supported, the alpha value which can be up to 16 bits wide.
269 * @info: frame buffer info structure
270 *
271 * Set a single color register. The values supplied have a 16 bit
272 * magnitude which needs to be scaled in this function for the hardware.
273 * Things to take into consideration are how many color registers, if
274 * any, are supported with the current color visual. With truecolor mode
275 * no color palettes are supported. Here a pseudo palette is created
276 * which we store the value in pseudo_palette in struct fb_info. For
277 * pseudocolor mode we have a limited color palette. To deal with this
278 * we can program what color is displayed for a particular pixel value.
279 * DirectColor is similar in that we can program each color field. If
280 * we have a static colormap we don't need to implement this function.
281 *
282 * Returns negative errno on error, or zero on success.
283 */
284static int xxxfb_setcolreg(unsigned regno, unsigned red, unsigned green,
285 unsigned blue, unsigned transp,
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700286 struct fb_info *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700287{
288 if (regno >= 256) /* no. of hw registers */
289 return -EINVAL;
290 /*
291 * Program hardware... do anything you want with transp
292 */
293
294 /* grayscale works only partially under directcolor */
295 if (info->var.grayscale) {
296 /* grayscale = 0.30*R + 0.59*G + 0.11*B */
297 red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
298 }
299
300 /* Directcolor:
301 * var->{color}.offset contains start of bitfield
302 * var->{color}.length contains length of bitfield
303 * {hardwarespecific} contains width of DAC
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800304 * pseudo_palette[X] is programmed to (X << red.offset) |
305 * (X << green.offset) |
306 * (X << blue.offset)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307 * RAMDAC[X] is programmed to (red, green, blue)
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800308 * color depth = SUM(var->{color}.length)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700309 *
310 * Pseudocolor:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700311 * var->{color}.offset is 0
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800312 * var->{color}.length contains width of DAC or the number of unique
313 * colors available (color depth)
314 * pseudo_palette is not used
315 * RAMDAC[X] is programmed to (red, green, blue)
316 * color depth = var->{color}.length
317 *
318 * Static pseudocolor:
319 * same as Pseudocolor, but the RAMDAC is not programmed (read-only)
320 *
321 * Mono01/Mono10:
322 * Has only 2 values, black on white or white on black (fg on bg),
323 * var->{color}.offset is 0
324 * white = (1 << var->{color}.length) - 1, black = 0
325 * pseudo_palette is not used
326 * RAMDAC does not exist
327 * color depth is always 2
328 *
Linus Torvalds1da177e2005-04-16 15:20:36 -0700329 * Truecolor:
330 * does not use RAMDAC (usually has 3 of them).
331 * var->{color}.offset contains start of bitfield
332 * var->{color}.length contains length of bitfield
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800333 * pseudo_palette is programmed to (red << red.offset) |
334 * (green << green.offset) |
335 * (blue << blue.offset) |
336 * (transp << transp.offset)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700337 * RAMDAC does not exist
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800338 * color depth = SUM(var->{color}.length})
339 *
340 * The color depth is used by fbcon for choosing the logo and also
341 * for color palette transformation if color depth < 4
342 *
343 * As can be seen from the above, the field bits_per_pixel is _NOT_
344 * a criteria for describing the color visual.
345 *
346 * A common mistake is assuming that bits_per_pixel <= 8 is pseudocolor,
347 * and higher than that, true/directcolor. This is incorrect, one needs
348 * to look at the fix->visual.
349 *
350 * Another common mistake is using bits_per_pixel to calculate the color
351 * depth. The bits_per_pixel field does not directly translate to color
352 * depth. You have to compute for the color depth (using the color
353 * bitfields) and fix->visual as seen above.
354 */
355
356 /*
357 * This is the point where the color is converted to something that
358 * is acceptable by the hardware.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700359 */
360#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800361 red = CNVT_TOHW(red, info->var.red.length);
362 green = CNVT_TOHW(green, info->var.green.length);
363 blue = CNVT_TOHW(blue, info->var.blue.length);
364 transp = CNVT_TOHW(transp, info->var.transp.length);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365#undef CNVT_TOHW
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800366 /*
367 * This is the point where the function feeds the color to the hardware
368 * palette after converting the colors to something acceptable by
369 * the hardware. Note, only FB_VISUAL_DIRECTCOLOR and
370 * FB_VISUAL_PSEUDOCOLOR visuals need to write to the hardware palette.
371 * If you have code that writes to the hardware CLUT, and it's not
372 * any of the above visuals, then you are doing something wrong.
373 */
374 if (info->fix.visual == FB_VISUAL_DIRECTCOLOR ||
375 info->fix.visual == FB_VISUAL_TRUECOLOR)
376 write_{red|green|blue|transp}_to_clut();
Linus Torvalds1da177e2005-04-16 15:20:36 -0700377
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800378 /* This is the point were you need to fill up the contents of
379 * info->pseudo_palette. This structure is used _only_ by fbcon, thus
380 * it only contains 16 entries to match the number of colors supported
381 * by the console. The pseudo_palette is used only if the visual is
382 * in directcolor or truecolor mode. With other visuals, the
383 * pseudo_palette is not used. (This might change in the future.)
384 *
385 * The contents of the pseudo_palette is in raw pixel format. Ie, each
386 * entry can be written directly to the framebuffer without any conversion.
387 * The pseudo_palette is (void *). However, if using the generic
388 * drawing functions (cfb_imageblit, cfb_fillrect), the pseudo_palette
389 * must be casted to (u32 *) _regardless_ of the bits per pixel. If the
390 * driver is using its own drawing functions, then it can use whatever
391 * size it wants.
392 */
393 if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
394 info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
395 u32 v;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700396
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800397 if (regno >= 16)
398 return -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700399
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800400 v = (red << info->var.red.offset) |
401 (green << info->var.green.offset) |
402 (blue << info->var.blue.offset) |
403 (transp << info->var.transp.offset);
404
405 ((u32*)(info->pseudo_palette))[regno] = v;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700406 }
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800407
Linus Torvalds1da177e2005-04-16 15:20:36 -0700408 /* ... */
409 return 0;
410}
411
412/**
413 * xxxfb_pan_display - NOT a required function. Pans the display.
414 * @var: frame buffer variable screen structure
415 * @info: frame buffer structure that represents a single frame buffer
416 *
417 * Pan (or wrap, depending on the `vmode' field) the display using the
418 * `xoffset' and `yoffset' fields of the `var' structure.
419 * If the values don't fit, return -EINVAL.
420 *
421 * Returns negative errno on error, or zero on success.
422 */
423static int xxxfb_pan_display(struct fb_var_screeninfo *var,
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700424 struct fb_info *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700425{
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800426 /*
427 * If your hardware does not support panning, _do_ _not_ implement this
428 * function. Creating a dummy function will just confuse user apps.
429 */
430
431 /*
432 * Note that even if this function is fully functional, a setting of
433 * 0 in both xpanstep and ypanstep means that this function will never
434 * get called.
435 */
436
Linus Torvalds1da177e2005-04-16 15:20:36 -0700437 /* ... */
438 return 0;
439}
440
441/**
442 * xxxfb_blank - NOT a required function. Blanks the display.
443 * @blank_mode: the blank mode we want.
444 * @info: frame buffer structure that represents a single frame buffer
445 *
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800446 * Blank the screen if blank_mode != FB_BLANK_UNBLANK, else unblank.
447 * Return 0 if blanking succeeded, != 0 if un-/blanking failed due to
448 * e.g. a video mode which doesn't support it.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700449 *
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800450 * Implements VESA suspend and powerdown modes on hardware that supports
451 * disabling hsync/vsync:
452 *
453 * FB_BLANK_NORMAL = display is blanked, syncs are on.
454 * FB_BLANK_HSYNC_SUSPEND = hsync off
455 * FB_BLANK_VSYNC_SUSPEND = vsync off
456 * FB_BLANK_POWERDOWN = hsync and vsync off
457 *
458 * If implementing this function, at least support FB_BLANK_UNBLANK.
459 * Return !0 for any modes that are unimplemented.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700460 *
461 */
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700462static int xxxfb_blank(int blank_mode, struct fb_info *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700463{
464 /* ... */
465 return 0;
466}
467
468/* ------------ Accelerated Functions --------------------- */
469
470/*
471 * We provide our own functions if we have hardware acceleration
472 * or non packed pixel format layouts. If we have no hardware
473 * acceleration, we can use a generic unaccelerated function. If using
474 * a pack pixel format just use the functions in cfb_*.c. Each file
475 * has one of the three different accel functions we support.
476 */
477
478/**
479 * xxxfb_fillrect - REQUIRED function. Can use generic routines if
480 * non acclerated hardware and packed pixel based.
481 * Draws a rectangle on the screen.
482 *
483 * @info: frame buffer structure that represents a single frame buffer
484 * @region: The structure representing the rectangular region we
485 * wish to draw to.
486 *
487 * This drawing operation places/removes a retangle on the screen
488 * depending on the rastering operation with the value of color which
489 * is in the current color depth format.
490 */
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700491void xxxfb_fillrect(struct fb_info *p, const struct fb_fillrect *region)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700492{
493/* Meaning of struct fb_fillrect
494 *
495 * @dx: The x and y corrdinates of the upper left hand corner of the
496 * @dy: area we want to draw to.
497 * @width: How wide the rectangle is we want to draw.
498 * @height: How tall the rectangle is we want to draw.
499 * @color: The color to fill in the rectangle with.
500 * @rop: The raster operation. We can draw the rectangle with a COPY
501 * of XOR which provides erasing effect.
502 */
503}
504
505/**
506 * xxxfb_copyarea - REQUIRED function. Can use generic routines if
507 * non acclerated hardware and packed pixel based.
508 * Copies one area of the screen to another area.
509 *
510 * @info: frame buffer structure that represents a single frame buffer
511 * @area: Structure providing the data to copy the framebuffer contents
512 * from one region to another.
513 *
514 * This drawing operation copies a rectangular area from one area of the
515 * screen to another area.
516 */
517void xxxfb_copyarea(struct fb_info *p, const struct fb_copyarea *area)
518{
519/*
520 * @dx: The x and y coordinates of the upper left hand corner of the
521 * @dy: destination area on the screen.
522 * @width: How wide the rectangle is we want to copy.
523 * @height: How tall the rectangle is we want to copy.
524 * @sx: The x and y coordinates of the upper left hand corner of the
525 * @sy: source area on the screen.
526 */
527}
528
529
530/**
531 * xxxfb_imageblit - REQUIRED function. Can use generic routines if
532 * non acclerated hardware and packed pixel based.
533 * Copies a image from system memory to the screen.
534 *
535 * @info: frame buffer structure that represents a single frame buffer
536 * @image: structure defining the image.
537 *
538 * This drawing operation draws a image on the screen. It can be a
539 * mono image (needed for font handling) or a color image (needed for
540 * tux).
541 */
542void xxxfb_imageblit(struct fb_info *p, const struct fb_image *image)
543{
544/*
545 * @dx: The x and y coordinates of the upper left hand corner of the
546 * @dy: destination area to place the image on the screen.
547 * @width: How wide the image is we want to copy.
548 * @height: How tall the image is we want to copy.
549 * @fg_color: For mono bitmap images this is color data for
550 * @bg_color: the foreground and background of the image to
551 * write directly to the frmaebuffer.
552 * @depth: How many bits represent a single pixel for this image.
553 * @data: The actual data used to construct the image on the display.
554 * @cmap: The colormap used for color images.
555 */
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800556
557/*
558 * The generic function, cfb_imageblit, expects that the bitmap scanlines are
559 * padded to the next byte. Most hardware accelerators may require padding to
560 * the next u16 or the next u32. If that is the case, the driver can specify
561 * this by setting info->pixmap.scan_align = 2 or 4. See a more
562 * comprehensive description of the pixmap below.
563 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700564}
565
566/**
Antonino A. Daplasc465e052005-11-07 01:00:35 -0800567 * xxxfb_cursor - OPTIONAL. If your hardware lacks support
568 * for a cursor, leave this field NULL.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700569 *
570 * @info: frame buffer structure that represents a single frame buffer
571 * @cursor: structure defining the cursor to draw.
572 *
573 * This operation is used to set or alter the properities of the
574 * cursor.
575 *
576 * Returns negative errno on error, or zero on success.
577 */
578int xxxfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
579{
580/*
581 * @set: Which fields we are altering in struct fb_cursor
582 * @enable: Disable or enable the cursor
583 * @rop: The bit operation we want to do.
584 * @mask: This is the cursor mask bitmap.
585 * @dest: A image of the area we are going to display the cursor.
586 * Used internally by the driver.
587 * @hot: The hot spot.
588 * @image: The actual data for the cursor image.
589 *
590 * NOTES ON FLAGS (cursor->set):
591 *
592 * FB_CUR_SETIMAGE - the cursor image has changed (cursor->image.data)
593 * FB_CUR_SETPOS - the cursor position has changed (cursor->image.dx|dy)
594 * FB_CUR_SETHOT - the cursor hot spot has changed (cursor->hot.dx|dy)
595 * FB_CUR_SETCMAP - the cursor colors has changed (cursor->fg_color|bg_color)
596 * FB_CUR_SETSHAPE - the cursor bitmask has changed (cursor->mask)
597 * FB_CUR_SETSIZE - the cursor size has changed (cursor->width|height)
598 * FB_CUR_SETALL - everything has changed
599 *
600 * NOTES ON ROPs (cursor->rop, Raster Operation)
601 *
602 * ROP_XOR - cursor->image.data XOR cursor->mask
603 * ROP_COPY - curosr->image.data AND cursor->mask
604 *
605 * OTHER NOTES:
606 *
607 * - fbcon only supports a 2-color cursor (cursor->image.depth = 1)
608 * - The fb_cursor structure, @cursor, _will_ always contain valid
609 * fields, whether any particular bitfields in cursor->set is set
610 * or not.
611 */
612}
613
614/**
615 * xxxfb_rotate - NOT a required function. If your hardware
616 * supports rotation the whole screen then
617 * you would provide a hook for this.
618 *
619 * @info: frame buffer structure that represents a single frame buffer
620 * @angle: The angle we rotate the screen.
621 *
622 * This operation is used to set or alter the properities of the
623 * cursor.
624 */
625void xxxfb_rotate(struct fb_info *info, int angle)
626{
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800627/* Will be deprecated */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700628}
629
630/**
Linus Torvalds1da177e2005-04-16 15:20:36 -0700631 * xxxfb_sync - NOT a required function. Normally the accel engine
632 * for a graphics card take a specific amount of time.
633 * Often we have to wait for the accelerator to finish
634 * its operation before we can write to the framebuffer
635 * so we can have consistent display output.
636 *
637 * @info: frame buffer structure that represents a single frame buffer
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800638 *
639 * If the driver has implemented its own hardware-based drawing function,
640 * implementing this function is highly recommended.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700641 */
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700642int xxxfb_sync(struct fb_info *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700643{
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700644 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700645}
646
647 /*
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700648 * Frame buffer operations
649 */
650
651static struct fb_ops xxxfb_ops = {
652 .owner = THIS_MODULE,
653 .fb_open = xxxfb_open,
654 .fb_read = xxxfb_read,
655 .fb_write = xxxfb_write,
656 .fb_release = xxxfb_release,
657 .fb_check_var = xxxfb_check_var,
658 .fb_set_par = xxxfb_set_par,
659 .fb_setcolreg = xxxfb_setcolreg,
660 .fb_blank = xxxfb_blank,
661 .fb_pan_display = xxxfb_pan_display,
662 .fb_fillrect = xxxfb_fillrect, /* Needed !!! */
663 .fb_copyarea = xxxfb_copyarea, /* Needed !!! */
664 .fb_imageblit = xxxfb_imageblit, /* Needed !!! */
665 .fb_cursor = xxxfb_cursor, /* Optional !!! */
666 .fb_rotate = xxxfb_rotate,
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700667 .fb_sync = xxxfb_sync,
668 .fb_ioctl = xxxfb_ioctl,
669 .fb_mmap = xxxfb_mmap,
670};
671
672/* ------------------------------------------------------------------------- */
673
674 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700675 * Initialization
676 */
677
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800678/* static int __init xxfb_probe (struct device *device) -- for platform devs */
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700679static int __devinit xxxfb_probe(struct pci_dev *dev,
Krzysztof Helt4c7bf382007-05-08 00:40:10 -0700680 const struct pci_device_id *ent)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700681{
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800682 struct fb_info *info;
683 struct xxx_par *par;
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700684 struct device* device = &dev->dev; /* for pci drivers */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700685 int cmap_len, retval;
686
687 /*
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800688 * Dynamically allocate info and par
Linus Torvalds1da177e2005-04-16 15:20:36 -0700689 */
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800690 info = framebuffer_alloc(sizeof(struct xxx_par), device);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700691
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800692 if (!info) {
693 /* goto error path */
694 }
695
696 par = info->par;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700697
698 /*
699 * Here we set the screen_base to the virtual memory address
700 * for the framebuffer. Usually we obtain the resource address
701 * from the bus layer and then translate it to virtual memory
702 * space via ioremap. Consult ioport.h.
703 */
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800704 info->screen_base = framebuffer_virtual_memory;
705 info->fbops = &xxxfb_ops;
706 info->fix = xxxfb_fix; /* this will be the only time xxxfb_fix will be
Krzysztof Helt19c1a8b2007-05-08 00:40:14 -0700707 * used, so mark it as __devinitdata
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800708 */
709 info->pseudo_palette = pseudo_palette; /* The pseudopalette is an
710 * 16-member array
711 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700712 /*
713 * Set up flags to indicate what sort of acceleration your
714 * driver can provide (pan/wrap/copyarea/etc.) and whether it
715 * is a module -- see FBINFO_* in include/linux/fb.h
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800716 *
717 * If your hardware can support any of the hardware accelerated functions
718 * fbcon performance will improve if info->flags is set properly.
719 *
720 * FBINFO_HWACCEL_COPYAREA - hardware moves
721 * FBINFO_HWACCEL_FILLRECT - hardware fills
722 * FBINFO_HWACCEL_IMAGEBLIT - hardware mono->color expansion
723 * FBINFO_HWACCEL_YPAN - hardware can pan display in y-axis
724 * FBINFO_HWACCEL_YWRAP - hardware can wrap display in y-axis
725 * FBINFO_HWACCEL_DISABLED - supports hardware accels, but disabled
726 * FBINFO_READS_FAST - if set, prefer moves over mono->color expansion
727 * FBINFO_MISC_TILEBLITTING - hardware can do tile blits
728 *
729 * NOTE: These are for fbcon use only.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700730 */
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800731 info->flags = FBINFO_DEFAULT;
732
733/********************* This stage is optional ******************************/
734 /*
735 * The struct pixmap is a scratch pad for the drawing functions. This
736 * is where the monochrome bitmap is constructed by the higher layers
737 * and then passed to the accelerator. For drivers that uses
738 * cfb_imageblit, you can skip this part. For those that have a more
739 * rigorous requirement, this stage is needed
740 */
741
742 /* PIXMAP_SIZE should be small enough to optimize drawing, but not
743 * large enough that memory is wasted. A safe size is
744 * (max_xres * max_font_height/8). max_xres is driver dependent,
745 * max_font_height is 32.
746 */
747 info->pixmap.addr = kmalloc(PIXMAP_SIZE, GFP_KERNEL);
748 if (!info->pixmap.addr) {
749 /* goto error */
750 }
751
752 info->pixmap.size = PIXMAP_SIZE;
753
754 /*
755 * FB_PIXMAP_SYSTEM - memory is in system ram
756 * FB_PIXMAP_IO - memory is iomapped
757 * FB_PIXMAP_SYNC - if set, will call fb_sync() per access to pixmap,
758 * usually if FB_PIXMAP_IO is set.
759 *
760 * Currently, FB_PIXMAP_IO is unimplemented.
761 */
762 info->pixmap.flags = FB_PIXMAP_SYSTEM;
763
764 /*
765 * scan_align is the number of padding for each scanline. It is in bytes.
766 * Thus for accelerators that need padding to the next u32, put 4 here.
767 */
768 info->pixmap.scan_align = 4;
769
770 /*
771 * buf_align is the amount to be padded for the buffer. For example,
772 * the i810fb needs a scan_align of 2 but expects it to be fed with
773 * dwords, so a buf_align = 4 is required.
774 */
775 info->pixmap.buf_align = 4;
776
777 /* access_align is how many bits can be accessed from the framebuffer
778 * ie. some epson cards allow 16-bit access only. Most drivers will
779 * be safe with u32 here.
780 *
781 * NOTE: This field is currently unused.
782 */
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700783 info->pixmap.scan_align = 32;
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800784/***************************** End optional stage ***************************/
Linus Torvalds1da177e2005-04-16 15:20:36 -0700785
786 /*
787 * This should give a reasonable default video mode. The following is
788 * done when we can set a video mode.
789 */
790 if (!mode_option)
791 mode_option = "640x480@60";
792
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700793 retval = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700794
795 if (!retval || retval == 4)
796 return -EINVAL;
797
798 /* This has to been done !!! */
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700799 fb_alloc_cmap(&info->cmap, cmap_len, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700800
801 /*
802 * The following is done in the case of having hardware with a static
803 * mode. If we are setting the mode ourselves we don't call this.
804 */
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800805 info->var = xxxfb_var;
806
807 /*
808 * For drivers that can...
809 */
810 xxxfb_check_var(&info->var, info);
811
812 /*
813 * Does a call to fb_set_par() before register_framebuffer needed? This
814 * will depend on you and the hardware. If you are sure that your driver
815 * is the only device in the system, a call to fb_set_par() is safe.
816 *
817 * Hardware in x86 systems has a VGA core. Calling set_par() at this
818 * point will corrupt the VGA console, so it might be safer to skip a
819 * call to set_par here and just allow fbcon to do it for you.
820 */
821 /* xxxfb_set_par(info); */
822
823 if (register_framebuffer(info) < 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700824 return -EINVAL;
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800825 printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
826 info->fix.id);
827 pci_set_drvdata(dev, info); /* or dev_set_drvdata(device, info) */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700828 return 0;
829}
830
831 /*
832 * Cleanup
833 */
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700834/* static void __devexit xxxfb_remove(struct device *device) */
835static void __devexit xxxfb_remove(struct pci_dev *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700836{
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700837 struct fb_info *info = pci_get_drvdata(dev);
838 /* or dev_get_drvdata(device); */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700839
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800840 if (info) {
841 unregister_framebuffer(info);
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700842 fb_dealloc_cmap(&info->cmap);
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800843 /* ... */
844 framebuffer_release(info);
845 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700846}
847
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700848#ifdef CONFIG_PCI
849#ifdef CONFIG_PM
850/**
851 * xxxfb_suspend - Optional but recommended function. Suspend the device.
852 * @dev: PCI device
853 * @msg: the suspend event code.
854 *
855 * See Documentation/power/devices.txt for more information
856 */
857static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
858{
859 struct fb_info *info = pci_get_drvdata(dev);
860 struct xxxfb_par *par = info->par;
861
862 /* suspend here */
863 return 0;
864}
865
866/**
867 * xxxfb_resume - Optional but recommended function. Resume the device.
868 * @dev: PCI device
869 *
870 * See Documentation/power/devices.txt for more information
871 */
872static int xxxfb_resume(struct pci_dev *dev)
873{
874 struct fb_info *info = pci_get_drvdata(dev);
875 struct xxxfb_par *par = info->par;
876
877 /* resume here */
878 return 0;
879}
880#else
881#define xxxfb_suspend NULL
882#define xxxfb_resume NULL
883#endif /* CONFIG_PM */
884
885static struct pci_device_id xxxfb_id_table[] = {
886 { PCI_VENDOR_ID_XXX, PCI_DEVICE_ID_XXX,
887 PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
Krzysztof Helt4c7bf382007-05-08 00:40:10 -0700888 PCI_CLASS_MASK, 0 },
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700889 { 0, }
890};
891
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800892/* For PCI drivers */
893static struct pci_driver xxxfb_driver = {
894 .name = "xxxfb",
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700895 .id_table = xxxfb_id_table,
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800896 .probe = xxxfb_probe,
897 .remove = __devexit_p(xxxfb_remove),
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700898 .suspend = xxxfb_suspend, /* optional but recommended */
899 .resume = xxxfb_resume, /* optional but recommended */
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800900};
901
Krzysztof Helt19c1a8b2007-05-08 00:40:14 -0700902MODULE_DEVICE_TABLE(pci, xxxfb_id_table);
903
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700904int __init xxxfb_init(void)
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800905{
906 /*
907 * For kernel boot options (in 'video=xxxfb:<options>' format)
908 */
909#ifndef MODULE
910 char *option = NULL;
911
912 if (fb_get_options("xxxfb", &option))
913 return -ENODEV;
914 xxxfb_setup(option);
915#endif
916
917 return pci_register_driver(&xxxfb_driver);
918}
919
920static void __exit xxxfb_exit(void)
921{
922 pci_unregister_driver(&xxxfb_driver);
923}
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700924#else /* non PCI, platform drivers */
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800925#include <linux/platform_device.h>
926/* for platform devices */
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700927
928#ifdef CONFIG_PM
929/**
930 * xxxfb_suspend - Optional but recommended function. Suspend the device.
931 * @dev: platform device
932 * @msg: the suspend event code.
933 *
934 * See Documentation/power/devices.txt for more information
935 */
936static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg)
937{
938 struct fb_info *info = platform_get_drvdata(dev);
939 struct xxxfb_par *par = info->par;
940
941 /* suspend here */
942 return 0;
943}
944
945/**
946 * xxxfb_resume - Optional but recommended function. Resume the device.
Antonino A. Daplasa42dc9d2007-05-08 00:38:55 -0700947 * @dev: platform device
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700948 *
949 * See Documentation/power/devices.txt for more information
950 */
Antonino A. Daplasa42dc9d2007-05-08 00:38:55 -0700951static int xxxfb_resume(struct platform_dev *dev)
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700952{
953 struct fb_info *info = platform_get_drvdata(dev);
954 struct xxxfb_par *par = info->par;
955
956 /* resume here */
957 return 0;
958}
959#else
960#define xxxfb_suspend NULL
961#define xxxfb_resume NULL
962#endif /* CONFIG_PM */
963
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800964static struct device_driver xxxfb_driver = {
965 .name = "xxxfb",
966 .bus = &platform_bus_type,
967 .probe = xxxfb_probe,
968 .remove = xxxfb_remove,
Krzysztof Helt36cc5352007-05-08 00:38:25 -0700969 .suspend = xxxfb_suspend, /* optional but recommended */
970 .resume = xxxfb_resume, /* optional but recommended */
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800971};
972
973static struct platform_device xxxfb_device = {
974 .name = "xxxfb",
975};
976
Krzysztof Helt2d9f95f2007-06-01 00:46:42 -0700977#ifndef MODULE
978 /*
979 * Setup
980 */
981
982/*
983 * Only necessary if your driver takes special options,
984 * otherwise we fall back on the generic fb_setup().
985 */
986int __init xxxfb_setup(char *options)
987{
988 /* Parse user speficied options (`video=xxxfb:') */
989}
990#endif /* MODULE */
991
Antonino A. Daplasd9112332006-01-09 20:53:34 -0800992static int __init xxxfb_init(void)
993{
994 int ret;
995 /*
996 * For kernel boot options (in 'video=xxxfb:<options>' format)
997 */
998#ifndef MODULE
999 char *option = NULL;
1000
1001 if (fb_get_options("xxxfb", &option))
1002 return -ENODEV;
1003 xxxfb_setup(option);
1004#endif
1005 ret = driver_register(&xxxfb_driver);
1006
1007 if (!ret) {
1008 ret = platform_device_register(&xxxfb_device);
1009 if (ret)
1010 driver_unregister(&xxxfb_driver);
1011 }
1012
1013 return ret;
1014}
1015
1016static void __exit xxxfb_exit(void)
1017{
1018 platform_device_unregister(&xxxfb_device);
1019 driver_unregister(&xxxfb_driver);
1020}
Krzysztof Helt36cc5352007-05-08 00:38:25 -07001021#endif /* CONFIG_PCI */
Antonino A. Daplasd9112332006-01-09 20:53:34 -08001022
Linus Torvalds1da177e2005-04-16 15:20:36 -07001023/* ------------------------------------------------------------------------- */
1024
1025
1026 /*
1027 * Modularization
1028 */
1029
1030module_init(xxxfb_init);
Krzysztof Helt36cc5352007-05-08 00:38:25 -07001031module_exit(xxxfb_remove);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001032
1033MODULE_LICENSE("GPL");