blob: 6a375a084acc2e9912665fb1127549a525a4d62b [file] [log] [blame]
Bryan Wu19381f02007-05-21 18:09:31 +08001/*
2 * File: include/asm-blackfin/mach-bf527/defBF525.h
3 * Based on:
4 * Author:
5 *
6 * Created:
7 * Description:
8 *
9 * Rev:
10 *
11 * Modified:
12 *
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2, or (at your option)
18 * any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; see the file COPYING.
27 * If not, write to the Free Software Foundation,
28 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
29 */
30
31#ifndef _DEF_BF525_H
32#define _DEF_BF525_H
33
34/* Include all Core registers and bit definitions */
35#include <asm/mach-common/def_LPBlackfin.h>
36
37/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
38
39/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
40#include "defBF52x_base.h"
41
42/* The following are the #defines needed by ADSP-BF525 that are not in the common header */
43
44/* USB Control Registers */
45
46#define USB_FADDR 0xffc03800 /* Function address register */
47#define USB_POWER 0xffc03804 /* Power management register */
48#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
49#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */
50#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */
51#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */
52#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */
53#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */
54#define USB_FRAME 0xffc03820 /* USB frame number */
55#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */
56#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */
57#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
58#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */
59
60/* USB Packet Control Registers */
61
62#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */
63#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
64#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
65#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */
66#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */
67#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
68#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
69#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
70#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
71#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
72#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
73#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
74#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */
75
76/* USB Endpoint FIFO Registers */
77
78#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */
79#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */
80#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */
81#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */
82#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */
83#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */
84#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */
85#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */
86
87/* USB OTG Control Registers */
88
89#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */
90#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */
91#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */
92
93/* USB Phy Control Registers */
94
95#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */
96#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */
97#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */
98#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */
99#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */
100
101/* (APHY_CNTRL is for ADI usage only) */
102
103#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */
104
105/* (APHY_CALIB is for ADI usage only) */
106
107#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */
108
109#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
110
111/* (PHY_TEST is for ADI usage only) */
112
113#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */
114
115#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */
116#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
117
118/* USB Endpoint 0 Control Registers */
119
120#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */
121#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */
122#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */
123#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */
124#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */
125#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
126#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */
127#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
128#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
129#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
130
131/* USB Endpoint 1 Control Registers */
132
133#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */
134#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */
135#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */
136#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */
137#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */
138#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
139#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */
140#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
141#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
142#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
143
144/* USB Endpoint 2 Control Registers */
145
146#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */
147#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */
148#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */
149#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */
150#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */
151#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
152#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */
153#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
154#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
155#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
156
157/* USB Endpoint 3 Control Registers */
158
159#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */
160#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */
161#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */
162#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */
163#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */
164#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
165#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */
166#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
167#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
168#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
169
170/* USB Endpoint 4 Control Registers */
171
172#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */
173#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */
174#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */
175#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */
176#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */
177#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
178#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */
179#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
180#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
181#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
182
183/* USB Endpoint 5 Control Registers */
184
185#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */
186#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */
187#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */
188#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */
189#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */
190#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
191#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */
192#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
193#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
194#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */
195
196/* USB Endpoint 6 Control Registers */
197
198#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */
199#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */
200#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */
201#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */
202#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */
203#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
204#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */
205#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
206#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
207#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
208
209/* USB Endpoint 7 Control Registers */
210
211#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */
212#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */
213#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */
214#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */
215#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */
216#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
217#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */
218#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
219#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
220#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
221
222#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */
223
224/* USB Channel 0 Config Registers */
225
226#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */
227#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
228#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
229#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
230#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
231
232/* USB Channel 1 Config Registers */
233
234#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */
235#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
236#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
237#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
238#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
239
240/* USB Channel 2 Config Registers */
241
242#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */
243#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
244#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
245#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
246#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
247
248/* USB Channel 3 Config Registers */
249
250#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */
251#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
252#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
253#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
254#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
255
256/* USB Channel 4 Config Registers */
257
258#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */
259#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
260#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
261#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
262#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
263
264/* USB Channel 5 Config Registers */
265
266#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */
267#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
268#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
269#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
270#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
271
272/* USB Channel 6 Config Registers */
273
274#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */
275#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
276#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
277#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
278#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
279
280/* USB Channel 7 Config Registers */
281
282#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */
283#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
284#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
285#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
286#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
287
288/* Bit masks for USB_FADDR */
289
290#define FUNCTION_ADDRESS 0x7f /* Function address */
291
292/* Bit masks for USB_POWER */
293
294#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
295#define nENABLE_SUSPENDM 0x0
296#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
297#define nSUSPEND_MODE 0x0
298#define RESUME_MODE 0x4 /* DMA Mode */
299#define nRESUME_MODE 0x0
300#define RESET 0x8 /* Reset indicator */
301#define nRESET 0x0
302#define HS_MODE 0x10 /* High Speed mode indicator */
303#define nHS_MODE 0x0
304#define HS_ENABLE 0x20 /* high Speed Enable */
305#define nHS_ENABLE 0x0
306#define SOFT_CONN 0x40 /* Soft connect */
307#define nSOFT_CONN 0x0
308#define ISO_UPDATE 0x80 /* Isochronous update */
309#define nISO_UPDATE 0x0
310
311/* Bit masks for USB_INTRTX */
312
313#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
314#define nEP0_TX 0x0
315#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
316#define nEP1_TX 0x0
317#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
318#define nEP2_TX 0x0
319#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
320#define nEP3_TX 0x0
321#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
322#define nEP4_TX 0x0
323#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
324#define nEP5_TX 0x0
325#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
326#define nEP6_TX 0x0
327#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
328#define nEP7_TX 0x0
329
330/* Bit masks for USB_INTRRX */
331
332#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
333#define nEP1_RX 0x0
334#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
335#define nEP2_RX 0x0
336#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
337#define nEP3_RX 0x0
338#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
339#define nEP4_RX 0x0
340#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
341#define nEP5_RX 0x0
342#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
343#define nEP6_RX 0x0
344#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
345#define nEP7_RX 0x0
346
347/* Bit masks for USB_INTRTXE */
348
349#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
350#define nEP0_TX_E 0x0
351#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
352#define nEP1_TX_E 0x0
353#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
354#define nEP2_TX_E 0x0
355#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
356#define nEP3_TX_E 0x0
357#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
358#define nEP4_TX_E 0x0
359#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
360#define nEP5_TX_E 0x0
361#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
362#define nEP6_TX_E 0x0
363#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
364#define nEP7_TX_E 0x0
365
366/* Bit masks for USB_INTRRXE */
367
368#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
369#define nEP1_RX_E 0x0
370#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
371#define nEP2_RX_E 0x0
372#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
373#define nEP3_RX_E 0x0
374#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
375#define nEP4_RX_E 0x0
376#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
377#define nEP5_RX_E 0x0
378#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
379#define nEP6_RX_E 0x0
380#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
381#define nEP7_RX_E 0x0
382
383/* Bit masks for USB_INTRUSB */
384
385#define SUSPEND_B 0x1 /* Suspend indicator */
386#define nSUSPEND_B 0x0
387#define RESUME_B 0x2 /* Resume indicator */
388#define nRESUME_B 0x0
389#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
390#define nRESET_OR_BABLE_B 0x0
391#define SOF_B 0x8 /* Start of frame */
392#define nSOF_B 0x0
393#define CONN_B 0x10 /* Connection indicator */
394#define nCONN_B 0x0
395#define DISCON_B 0x20 /* Disconnect indicator */
396#define nDISCON_B 0x0
397#define SESSION_REQ_B 0x40 /* Session Request */
398#define nSESSION_REQ_B 0x0
399#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
400#define nVBUS_ERROR_B 0x0
401
402/* Bit masks for USB_INTRUSBE */
403
404#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
405#define nSUSPEND_BE 0x0
406#define RESUME_BE 0x2 /* Resume indicator int enable */
407#define nRESUME_BE 0x0
408#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
409#define nRESET_OR_BABLE_BE 0x0
410#define SOF_BE 0x8 /* Start of frame int enable */
411#define nSOF_BE 0x0
412#define CONN_BE 0x10 /* Connection indicator int enable */
413#define nCONN_BE 0x0
414#define DISCON_BE 0x20 /* Disconnect indicator int enable */
415#define nDISCON_BE 0x0
416#define SESSION_REQ_BE 0x40 /* Session Request int enable */
417#define nSESSION_REQ_BE 0x0
418#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
419#define nVBUS_ERROR_BE 0x0
420
421/* Bit masks for USB_FRAME */
422
423#define FRAME_NUMBER 0x7ff /* Frame number */
424
425/* Bit masks for USB_INDEX */
426
427#define SELECTED_ENDPOINT 0xf /* selected endpoint */
428
429/* Bit masks for USB_GLOBAL_CTL */
430
431#define GLOBAL_ENA 0x1 /* enables USB module */
432#define nGLOBAL_ENA 0x0
433#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
434#define nEP1_TX_ENA 0x0
435#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
436#define nEP2_TX_ENA 0x0
437#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
438#define nEP3_TX_ENA 0x0
439#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
440#define nEP4_TX_ENA 0x0
441#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
442#define nEP5_TX_ENA 0x0
443#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
444#define nEP6_TX_ENA 0x0
445#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
446#define nEP7_TX_ENA 0x0
447#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
448#define nEP1_RX_ENA 0x0
449#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
450#define nEP2_RX_ENA 0x0
451#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
452#define nEP3_RX_ENA 0x0
453#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
454#define nEP4_RX_ENA 0x0
455#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
456#define nEP5_RX_ENA 0x0
457#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
458#define nEP6_RX_ENA 0x0
459#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
460#define nEP7_RX_ENA 0x0
461
462/* Bit masks for USB_OTG_DEV_CTL */
463
464#define SESSION 0x1 /* session indicator */
465#define nSESSION 0x0
466#define HOST_REQ 0x2 /* Host negotiation request */
467#define nHOST_REQ 0x0
468#define HOST_MODE 0x4 /* indicates USBDRC is a host */
469#define nHOST_MODE 0x0
470#define VBUS0 0x8 /* Vbus level indicator[0] */
471#define nVBUS0 0x0
472#define VBUS1 0x10 /* Vbus level indicator[1] */
473#define nVBUS1 0x0
474#define LSDEV 0x20 /* Low-speed indicator */
475#define nLSDEV 0x0
476#define FSDEV 0x40 /* Full or High-speed indicator */
477#define nFSDEV 0x0
478#define B_DEVICE 0x80 /* A' or 'B' device indicator */
479#define nB_DEVICE 0x0
480
481/* Bit masks for USB_OTG_VBUS_IRQ */
482
483#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
484#define nDRIVE_VBUS_ON 0x0
485#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
486#define nDRIVE_VBUS_OFF 0x0
487#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
488#define nCHRG_VBUS_START 0x0
489#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
490#define nCHRG_VBUS_END 0x0
491#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
492#define nDISCHRG_VBUS_START 0x0
493#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
494#define nDISCHRG_VBUS_END 0x0
495
496/* Bit masks for USB_OTG_VBUS_MASK */
497
498#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
499#define nDRIVE_VBUS_ON_ENA 0x0
500#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
501#define nDRIVE_VBUS_OFF_ENA 0x0
502#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
503#define nCHRG_VBUS_START_ENA 0x0
504#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
505#define nCHRG_VBUS_END_ENA 0x0
506#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
507#define nDISCHRG_VBUS_START_ENA 0x0
508#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
509#define nDISCHRG_VBUS_END_ENA 0x0
510
511/* Bit masks for USB_CSR0 */
512
513#define RXPKTRDY 0x1 /* data packet receive indicator */
514#define nRXPKTRDY 0x0
515#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
516#define nTXPKTRDY 0x0
517#define STALL_SENT 0x4 /* STALL handshake sent */
518#define nSTALL_SENT 0x0
519#define DATAEND 0x8 /* Data end indicator */
520#define nDATAEND 0x0
521#define SETUPEND 0x10 /* Setup end */
522#define nSETUPEND 0x0
523#define SENDSTALL 0x20 /* Send STALL handshake */
524#define nSENDSTALL 0x0
525#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
526#define nSERVICED_RXPKTRDY 0x0
527#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
528#define nSERVICED_SETUPEND 0x0
529#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
530#define nFLUSHFIFO 0x0
531#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
532#define nSTALL_RECEIVED_H 0x0
533#define SETUPPKT_H 0x8 /* send Setup token host mode */
534#define nSETUPPKT_H 0x0
535#define ERROR_H 0x10 /* timeout error indicator host mode */
536#define nERROR_H 0x0
537#define REQPKT_H 0x20 /* Request an IN transaction host mode */
538#define nREQPKT_H 0x0
539#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
540#define nSTATUSPKT_H 0x0
541#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
542#define nNAK_TIMEOUT_H 0x0
543
544/* Bit masks for USB_COUNT0 */
545
546#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
547
548/* Bit masks for USB_NAKLIMIT0 */
549
550#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
551
552/* Bit masks for USB_TX_MAX_PACKET */
553
554#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
555
556/* Bit masks for USB_RX_MAX_PACKET */
557
558#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
559
560/* Bit masks for USB_TXCSR */
561
562#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
563#define nTXPKTRDY_T 0x0
564#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
565#define nFIFO_NOT_EMPTY_T 0x0
566#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
567#define nUNDERRUN_T 0x0
568#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
569#define nFLUSHFIFO_T 0x0
570#define STALL_SEND_T 0x10 /* issue a Stall handshake */
571#define nSTALL_SEND_T 0x0
572#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
573#define nSTALL_SENT_T 0x0
574#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
575#define nCLEAR_DATATOGGLE_T 0x0
576#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
577#define nINCOMPTX_T 0x0
578#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
579#define nDMAREQMODE_T 0x0
580#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
581#define nFORCE_DATATOGGLE_T 0x0
582#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
583#define nDMAREQ_ENA_T 0x0
584#define ISO_T 0x4000 /* enable Isochronous transfers */
585#define nISO_T 0x0
586#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
587#define nAUTOSET_T 0x0
588#define ERROR_TH 0x4 /* error condition host mode */
589#define nERROR_TH 0x0
590#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
591#define nSTALL_RECEIVED_TH 0x0
592#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
593#define nNAK_TIMEOUT_TH 0x0
594
595/* Bit masks for USB_TXCOUNT */
596
597#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
598
599/* Bit masks for USB_RXCSR */
600
601#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
602#define nRXPKTRDY_R 0x0
603#define FIFO_FULL_R 0x2 /* FIFO not empty */
604#define nFIFO_FULL_R 0x0
605#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
606#define nOVERRUN_R 0x0
607#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
608#define nDATAERROR_R 0x0
609#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
610#define nFLUSHFIFO_R 0x0
611#define STALL_SEND_R 0x20 /* issue a Stall handshake */
612#define nSTALL_SEND_R 0x0
613#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
614#define nSTALL_SENT_R 0x0
615#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
616#define nCLEAR_DATATOGGLE_R 0x0
617#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
618#define nINCOMPRX_R 0x0
619#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
620#define nDMAREQMODE_R 0x0
621#define DISNYET_R 0x1000 /* disable Nyet handshakes */
622#define nDISNYET_R 0x0
623#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
624#define nDMAREQ_ENA_R 0x0
625#define ISO_R 0x4000 /* enable Isochronous transfers */
626#define nISO_R 0x0
627#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
628#define nAUTOCLEAR_R 0x0
629#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
630#define nERROR_RH 0x0
631#define REQPKT_RH 0x20 /* request an IN transaction host mode */
632#define nREQPKT_RH 0x0
633#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
634#define nSTALL_RECEIVED_RH 0x0
635#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
636#define nINCOMPRX_RH 0x0
637#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
638#define nDMAREQMODE_RH 0x0
639#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
640#define nAUTOREQ_RH 0x0
641
642/* Bit masks for USB_RXCOUNT */
643
644#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
645
646/* Bit masks for USB_TXTYPE */
647
648#define TARGET_EP_NO_T 0xf /* EP number */
649#define PROTOCOL_T 0xc /* transfer type */
650
651/* Bit masks for USB_TXINTERVAL */
652
653#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
654
655/* Bit masks for USB_RXTYPE */
656
657#define TARGET_EP_NO_R 0xf /* EP number */
658#define PROTOCOL_R 0xc /* transfer type */
659
660/* Bit masks for USB_RXINTERVAL */
661
662#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
663
664/* Bit masks for USB_DMA_INTERRUPT */
665
666#define DMA0_INT 0x1 /* DMA0 pending interrupt */
667#define nDMA0_INT 0x0
668#define DMA1_INT 0x2 /* DMA1 pending interrupt */
669#define nDMA1_INT 0x0
670#define DMA2_INT 0x4 /* DMA2 pending interrupt */
671#define nDMA2_INT 0x0
672#define DMA3_INT 0x8 /* DMA3 pending interrupt */
673#define nDMA3_INT 0x0
674#define DMA4_INT 0x10 /* DMA4 pending interrupt */
675#define nDMA4_INT 0x0
676#define DMA5_INT 0x20 /* DMA5 pending interrupt */
677#define nDMA5_INT 0x0
678#define DMA6_INT 0x40 /* DMA6 pending interrupt */
679#define nDMA6_INT 0x0
680#define DMA7_INT 0x80 /* DMA7 pending interrupt */
681#define nDMA7_INT 0x0
682
683/* Bit masks for USB_DMAxCONTROL */
684
685#define DMA_ENA 0x1 /* DMA enable */
686#define nDMA_ENA 0x0
687#define DIRECTION 0x2 /* direction of DMA transfer */
688#define nDIRECTION 0x0
689#define MODE 0x4 /* DMA Bus error */
690#define nMODE 0x0
691#define INT_ENA 0x8 /* Interrupt enable */
692#define nINT_ENA 0x0
693#define EPNUM 0xf0 /* EP number */
694#define BUSERROR 0x100 /* DMA Bus error */
695#define nBUSERROR 0x0
696
697/* Bit masks for USB_DMAxADDRHIGH */
698
699#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
700
701/* Bit masks for USB_DMAxADDRLOW */
702
703#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
704
705/* Bit masks for USB_DMAxCOUNTHIGH */
706
707#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
708
709/* Bit masks for USB_DMAxCOUNTLOW */
710
711#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
712
713#endif /* _DEF_BF525_H */