Carlo Caione | db33c77 | 2015-05-14 10:49:09 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Bluetooth support for Realtek devices |
| 3 | * |
| 4 | * Copyright (C) 2015 Endless Mobile, Inc. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License, or |
| 9 | * (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | */ |
| 17 | |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/firmware.h> |
| 20 | #include <asm/unaligned.h> |
| 21 | #include <linux/usb.h> |
| 22 | |
| 23 | #include <net/bluetooth/bluetooth.h> |
| 24 | #include <net/bluetooth/hci_core.h> |
| 25 | |
| 26 | #include "btrtl.h" |
| 27 | |
| 28 | #define VERSION "0.1" |
| 29 | |
| 30 | #define RTL_EPATCH_SIGNATURE "Realtech" |
| 31 | #define RTL_ROM_LMP_3499 0x3499 |
| 32 | #define RTL_ROM_LMP_8723A 0x1200 |
| 33 | #define RTL_ROM_LMP_8723B 0x8723 |
| 34 | #define RTL_ROM_LMP_8821A 0x8821 |
| 35 | #define RTL_ROM_LMP_8761A 0x8761 |
| 36 | |
| 37 | static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version) |
| 38 | { |
| 39 | struct rtl_rom_version_evt *rom_version; |
| 40 | struct sk_buff *skb; |
| 41 | |
| 42 | /* Read RTL ROM version command */ |
| 43 | skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT); |
| 44 | if (IS_ERR(skb)) { |
| 45 | BT_ERR("%s: Read ROM version failed (%ld)", |
| 46 | hdev->name, PTR_ERR(skb)); |
| 47 | return PTR_ERR(skb); |
| 48 | } |
| 49 | |
| 50 | if (skb->len != sizeof(*rom_version)) { |
| 51 | BT_ERR("%s: RTL version event length mismatch", hdev->name); |
| 52 | kfree_skb(skb); |
| 53 | return -EIO; |
| 54 | } |
| 55 | |
| 56 | rom_version = (struct rtl_rom_version_evt *)skb->data; |
| 57 | BT_INFO("%s: rom_version status=%x version=%x", |
| 58 | hdev->name, rom_version->status, rom_version->version); |
| 59 | |
| 60 | *version = rom_version->version; |
| 61 | |
| 62 | kfree_skb(skb); |
| 63 | return 0; |
| 64 | } |
| 65 | |
| 66 | static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver, |
| 67 | const struct firmware *fw, |
| 68 | unsigned char **_buf) |
| 69 | { |
| 70 | const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 }; |
| 71 | struct rtl_epatch_header *epatch_info; |
| 72 | unsigned char *buf; |
| 73 | int i, ret, len; |
| 74 | size_t min_size; |
| 75 | u8 opcode, length, data, rom_version = 0; |
| 76 | int project_id = -1; |
| 77 | const unsigned char *fwptr, *chip_id_base; |
| 78 | const unsigned char *patch_length_base, *patch_offset_base; |
| 79 | u32 patch_offset = 0; |
| 80 | u16 patch_length, num_patches; |
| 81 | const u16 project_id_to_lmp_subver[] = { |
| 82 | RTL_ROM_LMP_8723A, |
| 83 | RTL_ROM_LMP_8723B, |
| 84 | RTL_ROM_LMP_8821A, |
| 85 | RTL_ROM_LMP_8761A |
| 86 | }; |
| 87 | |
| 88 | ret = rtl_read_rom_version(hdev, &rom_version); |
| 89 | if (ret) |
| 90 | return ret; |
| 91 | |
| 92 | min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3; |
| 93 | if (fw->size < min_size) |
| 94 | return -EINVAL; |
| 95 | |
| 96 | fwptr = fw->data + fw->size - sizeof(extension_sig); |
| 97 | if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) { |
| 98 | BT_ERR("%s: extension section signature mismatch", hdev->name); |
| 99 | return -EINVAL; |
| 100 | } |
| 101 | |
| 102 | /* Loop from the end of the firmware parsing instructions, until |
| 103 | * we find an instruction that identifies the "project ID" for the |
| 104 | * hardware supported by this firwmare file. |
| 105 | * Once we have that, we double-check that that project_id is suitable |
| 106 | * for the hardware we are working with. |
| 107 | */ |
| 108 | while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) { |
| 109 | opcode = *--fwptr; |
| 110 | length = *--fwptr; |
| 111 | data = *--fwptr; |
| 112 | |
| 113 | BT_DBG("check op=%x len=%x data=%x", opcode, length, data); |
| 114 | |
| 115 | if (opcode == 0xff) /* EOF */ |
| 116 | break; |
| 117 | |
| 118 | if (length == 0) { |
| 119 | BT_ERR("%s: found instruction with length 0", |
| 120 | hdev->name); |
| 121 | return -EINVAL; |
| 122 | } |
| 123 | |
| 124 | if (opcode == 0 && length == 1) { |
| 125 | project_id = data; |
| 126 | break; |
| 127 | } |
| 128 | |
| 129 | fwptr -= length; |
| 130 | } |
| 131 | |
| 132 | if (project_id < 0) { |
| 133 | BT_ERR("%s: failed to find version instruction", hdev->name); |
| 134 | return -EINVAL; |
| 135 | } |
| 136 | |
| 137 | if (project_id >= ARRAY_SIZE(project_id_to_lmp_subver)) { |
| 138 | BT_ERR("%s: unknown project id %d", hdev->name, project_id); |
| 139 | return -EINVAL; |
| 140 | } |
| 141 | |
| 142 | if (lmp_subver != project_id_to_lmp_subver[project_id]) { |
| 143 | BT_ERR("%s: firmware is for %x but this is a %x", hdev->name, |
| 144 | project_id_to_lmp_subver[project_id], lmp_subver); |
| 145 | return -EINVAL; |
| 146 | } |
| 147 | |
| 148 | epatch_info = (struct rtl_epatch_header *)fw->data; |
| 149 | if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) { |
| 150 | BT_ERR("%s: bad EPATCH signature", hdev->name); |
| 151 | return -EINVAL; |
| 152 | } |
| 153 | |
| 154 | num_patches = le16_to_cpu(epatch_info->num_patches); |
| 155 | BT_DBG("fw_version=%x, num_patches=%d", |
| 156 | le32_to_cpu(epatch_info->fw_version), num_patches); |
| 157 | |
| 158 | /* After the rtl_epatch_header there is a funky patch metadata section. |
| 159 | * Assuming 2 patches, the layout is: |
| 160 | * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2 |
| 161 | * |
| 162 | * Find the right patch for this chip. |
| 163 | */ |
| 164 | min_size += 8 * num_patches; |
| 165 | if (fw->size < min_size) |
| 166 | return -EINVAL; |
| 167 | |
| 168 | chip_id_base = fw->data + sizeof(struct rtl_epatch_header); |
| 169 | patch_length_base = chip_id_base + (sizeof(u16) * num_patches); |
| 170 | patch_offset_base = patch_length_base + (sizeof(u16) * num_patches); |
| 171 | for (i = 0; i < num_patches; i++) { |
| 172 | u16 chip_id = get_unaligned_le16(chip_id_base + |
| 173 | (i * sizeof(u16))); |
| 174 | if (chip_id == rom_version + 1) { |
| 175 | patch_length = get_unaligned_le16(patch_length_base + |
| 176 | (i * sizeof(u16))); |
| 177 | patch_offset = get_unaligned_le32(patch_offset_base + |
| 178 | (i * sizeof(u32))); |
| 179 | break; |
| 180 | } |
| 181 | } |
| 182 | |
| 183 | if (!patch_offset) { |
| 184 | BT_ERR("%s: didn't find patch for chip id %d", |
| 185 | hdev->name, rom_version); |
| 186 | return -EINVAL; |
| 187 | } |
| 188 | |
| 189 | BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i); |
| 190 | min_size = patch_offset + patch_length; |
| 191 | if (fw->size < min_size) |
| 192 | return -EINVAL; |
| 193 | |
| 194 | /* Copy the firmware into a new buffer and write the version at |
| 195 | * the end. |
| 196 | */ |
| 197 | len = patch_length; |
| 198 | buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL); |
| 199 | if (!buf) |
| 200 | return -ENOMEM; |
| 201 | |
| 202 | memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4); |
| 203 | |
| 204 | *_buf = buf; |
| 205 | return len; |
| 206 | } |
| 207 | |
| 208 | static int rtl_download_firmware(struct hci_dev *hdev, |
| 209 | const unsigned char *data, int fw_len) |
| 210 | { |
| 211 | struct rtl_download_cmd *dl_cmd; |
| 212 | int frag_num = fw_len / RTL_FRAG_LEN + 1; |
| 213 | int frag_len = RTL_FRAG_LEN; |
| 214 | int ret = 0; |
| 215 | int i; |
| 216 | |
| 217 | dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL); |
| 218 | if (!dl_cmd) |
| 219 | return -ENOMEM; |
| 220 | |
| 221 | for (i = 0; i < frag_num; i++) { |
| 222 | struct sk_buff *skb; |
| 223 | |
| 224 | BT_DBG("download fw (%d/%d)", i, frag_num); |
| 225 | |
| 226 | dl_cmd->index = i; |
| 227 | if (i == (frag_num - 1)) { |
| 228 | dl_cmd->index |= 0x80; /* data end */ |
| 229 | frag_len = fw_len % RTL_FRAG_LEN; |
| 230 | } |
| 231 | memcpy(dl_cmd->data, data, frag_len); |
| 232 | |
| 233 | /* Send download command */ |
| 234 | skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd, |
| 235 | HCI_INIT_TIMEOUT); |
| 236 | if (IS_ERR(skb)) { |
| 237 | BT_ERR("%s: download fw command failed (%ld)", |
| 238 | hdev->name, PTR_ERR(skb)); |
| 239 | ret = -PTR_ERR(skb); |
| 240 | goto out; |
| 241 | } |
| 242 | |
| 243 | if (skb->len != sizeof(struct rtl_download_response)) { |
| 244 | BT_ERR("%s: download fw event length mismatch", |
| 245 | hdev->name); |
| 246 | kfree_skb(skb); |
| 247 | ret = -EIO; |
| 248 | goto out; |
| 249 | } |
| 250 | |
| 251 | kfree_skb(skb); |
| 252 | data += RTL_FRAG_LEN; |
| 253 | } |
| 254 | |
| 255 | out: |
| 256 | kfree(dl_cmd); |
| 257 | return ret; |
| 258 | } |
| 259 | |
| 260 | static int btrtl_setup_rtl8723a(struct hci_dev *hdev) |
| 261 | { |
| 262 | const struct firmware *fw; |
| 263 | int ret; |
| 264 | |
| 265 | BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name); |
| 266 | ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &hdev->dev); |
| 267 | if (ret < 0) { |
| 268 | BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name); |
| 269 | return ret; |
| 270 | } |
| 271 | |
| 272 | if (fw->size < 8) { |
| 273 | ret = -EINVAL; |
| 274 | goto out; |
| 275 | } |
| 276 | |
| 277 | /* Check that the firmware doesn't have the epatch signature |
| 278 | * (which is only for RTL8723B and newer). |
| 279 | */ |
| 280 | if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) { |
| 281 | BT_ERR("%s: unexpected EPATCH signature!", hdev->name); |
| 282 | ret = -EINVAL; |
| 283 | goto out; |
| 284 | } |
| 285 | |
| 286 | ret = rtl_download_firmware(hdev, fw->data, fw->size); |
| 287 | |
| 288 | out: |
| 289 | release_firmware(fw); |
| 290 | return ret; |
| 291 | } |
| 292 | |
| 293 | static int btrtl_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver, |
| 294 | const char *fw_name) |
| 295 | { |
| 296 | unsigned char *fw_data = NULL; |
| 297 | const struct firmware *fw; |
| 298 | int ret; |
| 299 | |
| 300 | BT_INFO("%s: rtl: loading %s", hdev->name, fw_name); |
| 301 | ret = request_firmware(&fw, fw_name, &hdev->dev); |
| 302 | if (ret < 0) { |
| 303 | BT_ERR("%s: Failed to load %s", hdev->name, fw_name); |
| 304 | return ret; |
| 305 | } |
| 306 | |
| 307 | ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data); |
| 308 | if (ret < 0) |
| 309 | goto out; |
| 310 | |
| 311 | ret = rtl_download_firmware(hdev, fw_data, ret); |
| 312 | kfree(fw_data); |
| 313 | if (ret < 0) |
| 314 | goto out; |
| 315 | |
| 316 | out: |
| 317 | release_firmware(fw); |
| 318 | return ret; |
| 319 | } |
| 320 | |
| 321 | static struct sk_buff *btrtl_read_local_version(struct hci_dev *hdev) |
| 322 | { |
| 323 | struct sk_buff *skb; |
| 324 | |
| 325 | skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, |
| 326 | HCI_INIT_TIMEOUT); |
| 327 | if (IS_ERR(skb)) { |
| 328 | BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)", |
| 329 | hdev->name, PTR_ERR(skb)); |
| 330 | return skb; |
| 331 | } |
| 332 | |
| 333 | if (skb->len != sizeof(struct hci_rp_read_local_version)) { |
| 334 | BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch", |
| 335 | hdev->name); |
| 336 | kfree_skb(skb); |
| 337 | return ERR_PTR(-EIO); |
| 338 | } |
| 339 | |
| 340 | return skb; |
| 341 | } |
| 342 | |
| 343 | int btrtl_setup_realtek(struct hci_dev *hdev) |
| 344 | { |
| 345 | struct sk_buff *skb; |
| 346 | struct hci_rp_read_local_version *resp; |
| 347 | u16 lmp_subver; |
| 348 | |
| 349 | skb = btrtl_read_local_version(hdev); |
| 350 | if (IS_ERR(skb)) |
| 351 | return -PTR_ERR(skb); |
| 352 | |
| 353 | resp = (struct hci_rp_read_local_version *)skb->data; |
| 354 | BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x " |
| 355 | "lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev, |
| 356 | resp->lmp_ver, resp->lmp_subver); |
| 357 | |
| 358 | lmp_subver = le16_to_cpu(resp->lmp_subver); |
| 359 | kfree_skb(skb); |
| 360 | |
| 361 | /* Match a set of subver values that correspond to stock firmware, |
| 362 | * which is not compatible with standard btusb. |
| 363 | * If matched, upload an alternative firmware that does conform to |
| 364 | * standard btusb. Once that firmware is uploaded, the subver changes |
| 365 | * to a different value. |
| 366 | */ |
| 367 | switch (lmp_subver) { |
| 368 | case RTL_ROM_LMP_8723A: |
| 369 | case RTL_ROM_LMP_3499: |
| 370 | return btrtl_setup_rtl8723a(hdev); |
| 371 | case RTL_ROM_LMP_8723B: |
| 372 | return btrtl_setup_rtl8723b(hdev, lmp_subver, |
| 373 | "rtl_bt/rtl8723b_fw.bin"); |
| 374 | case RTL_ROM_LMP_8821A: |
| 375 | return btrtl_setup_rtl8723b(hdev, lmp_subver, |
| 376 | "rtl_bt/rtl8821a_fw.bin"); |
| 377 | case RTL_ROM_LMP_8761A: |
| 378 | return btrtl_setup_rtl8723b(hdev, lmp_subver, |
| 379 | "rtl_bt/rtl8761a_fw.bin"); |
| 380 | default: |
| 381 | BT_INFO("rtl: assuming no firmware upload needed."); |
| 382 | return 0; |
| 383 | } |
| 384 | } |
| 385 | EXPORT_SYMBOL_GPL(btrtl_setup_realtek); |
| 386 | |
| 387 | MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>"); |
| 388 | MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION); |
| 389 | MODULE_VERSION(VERSION); |
| 390 | MODULE_LICENSE("GPL"); |