Shawn Lin | c474a94 | 2016-02-03 15:22:22 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Rockchip emmc PHY driver |
| 3 | * |
| 4 | * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com> |
| 5 | * Copyright (C) 2016 ROCKCHIP, Inc. |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License as published by |
| 9 | * the Free Software Foundation; either version 2 of the License. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | */ |
| 16 | |
| 17 | #include <linux/delay.h> |
| 18 | #include <linux/mfd/syscon.h> |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/of.h> |
| 21 | #include <linux/of_address.h> |
| 22 | #include <linux/phy/phy.h> |
| 23 | #include <linux/platform_device.h> |
| 24 | #include <linux/regmap.h> |
| 25 | |
| 26 | /* |
| 27 | * The higher 16-bit of this register is used for write protection |
| 28 | * only if BIT(x + 16) set to 1 the BIT(x) can be written. |
| 29 | */ |
| 30 | #define HIWORD_UPDATE(val, mask, shift) \ |
| 31 | ((val) << (shift) | (mask) << ((shift) + 16)) |
| 32 | |
| 33 | /* Register definition */ |
| 34 | #define GRF_EMMCPHY_CON0 0x0 |
| 35 | #define GRF_EMMCPHY_CON1 0x4 |
| 36 | #define GRF_EMMCPHY_CON2 0x8 |
| 37 | #define GRF_EMMCPHY_CON3 0xc |
| 38 | #define GRF_EMMCPHY_CON4 0x10 |
| 39 | #define GRF_EMMCPHY_CON5 0x14 |
| 40 | #define GRF_EMMCPHY_CON6 0x18 |
| 41 | #define GRF_EMMCPHY_STATUS 0x20 |
| 42 | |
| 43 | #define PHYCTRL_PDB_MASK 0x1 |
| 44 | #define PHYCTRL_PDB_SHIFT 0x0 |
| 45 | #define PHYCTRL_PDB_PWR_ON 0x1 |
| 46 | #define PHYCTRL_PDB_PWR_OFF 0x0 |
| 47 | #define PHYCTRL_ENDLL_MASK 0x1 |
| 48 | #define PHYCTRL_ENDLL_SHIFT 0x1 |
| 49 | #define PHYCTRL_ENDLL_ENABLE 0x1 |
| 50 | #define PHYCTRL_ENDLL_DISABLE 0x0 |
| 51 | #define PHYCTRL_CALDONE_MASK 0x1 |
| 52 | #define PHYCTRL_CALDONE_SHIFT 0x6 |
| 53 | #define PHYCTRL_CALDONE_DONE 0x1 |
| 54 | #define PHYCTRL_CALDONE_GOING 0x0 |
| 55 | #define PHYCTRL_DLLRDY_MASK 0x1 |
| 56 | #define PHYCTRL_DLLRDY_SHIFT 0x5 |
| 57 | #define PHYCTRL_DLLRDY_DONE 0x1 |
| 58 | #define PHYCTRL_DLLRDY_GOING 0x0 |
| 59 | |
| 60 | struct rockchip_emmc_phy { |
| 61 | unsigned int reg_offset; |
| 62 | struct regmap *reg_base; |
| 63 | }; |
| 64 | |
| 65 | static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy, |
| 66 | bool on_off) |
| 67 | { |
| 68 | unsigned int caldone; |
| 69 | unsigned int dllrdy; |
| 70 | |
| 71 | /* |
| 72 | * Keep phyctrl_pdb and phyctrl_endll low to allow |
| 73 | * initialization of CALIO state M/C DFFs |
| 74 | */ |
| 75 | regmap_write(rk_phy->reg_base, |
| 76 | rk_phy->reg_offset + GRF_EMMCPHY_CON6, |
| 77 | HIWORD_UPDATE(PHYCTRL_PDB_PWR_OFF, |
| 78 | PHYCTRL_PDB_MASK, |
| 79 | PHYCTRL_PDB_SHIFT)); |
| 80 | regmap_write(rk_phy->reg_base, |
| 81 | rk_phy->reg_offset + GRF_EMMCPHY_CON6, |
| 82 | HIWORD_UPDATE(PHYCTRL_ENDLL_DISABLE, |
| 83 | PHYCTRL_ENDLL_MASK, |
| 84 | PHYCTRL_ENDLL_SHIFT)); |
| 85 | |
| 86 | /* Already finish power_off above */ |
| 87 | if (on_off == PHYCTRL_PDB_PWR_OFF) |
| 88 | return 0; |
| 89 | |
| 90 | /* |
| 91 | * According to the user manual, calpad calibration |
| 92 | * cycle takes more than 2us without the minimal recommended |
| 93 | * value, so we may need a little margin here |
| 94 | */ |
| 95 | udelay(3); |
| 96 | regmap_write(rk_phy->reg_base, |
| 97 | rk_phy->reg_offset + GRF_EMMCPHY_CON6, |
| 98 | HIWORD_UPDATE(PHYCTRL_PDB_PWR_ON, |
| 99 | PHYCTRL_PDB_MASK, |
| 100 | PHYCTRL_PDB_SHIFT)); |
| 101 | |
| 102 | /* |
| 103 | * According to the user manual, it asks driver to |
| 104 | * wait 5us for calpad busy trimming |
| 105 | */ |
| 106 | udelay(5); |
| 107 | regmap_read(rk_phy->reg_base, |
| 108 | rk_phy->reg_offset + GRF_EMMCPHY_STATUS, |
| 109 | &caldone); |
| 110 | caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK; |
| 111 | if (caldone != PHYCTRL_CALDONE_DONE) { |
| 112 | pr_err("rockchip_emmc_phy_power: caldone timeout.\n"); |
| 113 | return -ETIMEDOUT; |
| 114 | } |
| 115 | |
| 116 | regmap_write(rk_phy->reg_base, |
| 117 | rk_phy->reg_offset + GRF_EMMCPHY_CON6, |
| 118 | HIWORD_UPDATE(PHYCTRL_ENDLL_ENABLE, |
| 119 | PHYCTRL_ENDLL_MASK, |
| 120 | PHYCTRL_ENDLL_SHIFT)); |
| 121 | /* |
| 122 | * After enable analog DLL circuits, we need extra 10.2us |
| 123 | * for dll to be ready for work. |
| 124 | */ |
| 125 | udelay(11); |
| 126 | regmap_read(rk_phy->reg_base, |
| 127 | rk_phy->reg_offset + GRF_EMMCPHY_STATUS, |
| 128 | &dllrdy); |
| 129 | dllrdy = (dllrdy >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK; |
| 130 | if (dllrdy != PHYCTRL_DLLRDY_DONE) { |
| 131 | pr_err("rockchip_emmc_phy_power: dllrdy timeout.\n"); |
| 132 | return -ETIMEDOUT; |
| 133 | } |
| 134 | |
| 135 | return 0; |
| 136 | } |
| 137 | |
| 138 | static int rockchip_emmc_phy_power_off(struct phy *phy) |
| 139 | { |
| 140 | struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); |
| 141 | int ret = 0; |
| 142 | |
| 143 | /* Power down emmc phy analog blocks */ |
| 144 | ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF); |
| 145 | if (ret) |
| 146 | return ret; |
| 147 | |
| 148 | return 0; |
| 149 | } |
| 150 | |
| 151 | static int rockchip_emmc_phy_power_on(struct phy *phy) |
| 152 | { |
| 153 | struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); |
| 154 | int ret = 0; |
| 155 | |
| 156 | /* Power up emmc phy analog blocks */ |
| 157 | ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON); |
| 158 | if (ret) |
| 159 | return ret; |
| 160 | |
| 161 | return 0; |
| 162 | } |
| 163 | |
| 164 | static const struct phy_ops ops = { |
| 165 | .power_on = rockchip_emmc_phy_power_on, |
| 166 | .power_off = rockchip_emmc_phy_power_off, |
| 167 | .owner = THIS_MODULE, |
| 168 | }; |
| 169 | |
| 170 | static int rockchip_emmc_phy_probe(struct platform_device *pdev) |
| 171 | { |
| 172 | struct device *dev = &pdev->dev; |
| 173 | struct rockchip_emmc_phy *rk_phy; |
| 174 | struct phy *generic_phy; |
| 175 | struct phy_provider *phy_provider; |
| 176 | struct regmap *grf; |
| 177 | unsigned int reg_offset; |
| 178 | |
Heiko Stuebner | 332184a | 2016-03-24 22:29:02 +0100 | [diff] [blame] | 179 | if (!dev->parent || !dev->parent->of_node) |
| 180 | return -ENODEV; |
| 181 | |
| 182 | grf = syscon_node_to_regmap(dev->parent->of_node); |
Shawn Lin | c474a94 | 2016-02-03 15:22:22 +0800 | [diff] [blame] | 183 | if (IS_ERR(grf)) { |
| 184 | dev_err(dev, "Missing rockchip,grf property\n"); |
| 185 | return PTR_ERR(grf); |
| 186 | } |
| 187 | |
| 188 | rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL); |
| 189 | if (!rk_phy) |
| 190 | return -ENOMEM; |
| 191 | |
| 192 | if (of_property_read_u32(dev->of_node, "reg", ®_offset)) { |
| 193 | dev_err(dev, "missing reg property in node %s\n", |
| 194 | dev->of_node->name); |
| 195 | return -EINVAL; |
| 196 | } |
| 197 | |
| 198 | rk_phy->reg_offset = reg_offset; |
| 199 | rk_phy->reg_base = grf; |
| 200 | |
| 201 | generic_phy = devm_phy_create(dev, dev->of_node, &ops); |
| 202 | if (IS_ERR(generic_phy)) { |
| 203 | dev_err(dev, "failed to create PHY\n"); |
| 204 | return PTR_ERR(generic_phy); |
| 205 | } |
| 206 | |
| 207 | phy_set_drvdata(generic_phy, rk_phy); |
| 208 | phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| 209 | |
| 210 | return PTR_ERR_OR_ZERO(phy_provider); |
| 211 | } |
| 212 | |
| 213 | static const struct of_device_id rockchip_emmc_phy_dt_ids[] = { |
| 214 | { .compatible = "rockchip,rk3399-emmc-phy" }, |
| 215 | {} |
| 216 | }; |
| 217 | |
| 218 | MODULE_DEVICE_TABLE(of, rockchip_emmc_phy_dt_ids); |
| 219 | |
| 220 | static struct platform_driver rockchip_emmc_driver = { |
| 221 | .probe = rockchip_emmc_phy_probe, |
| 222 | .driver = { |
| 223 | .name = "rockchip-emmc-phy", |
| 224 | .of_match_table = rockchip_emmc_phy_dt_ids, |
| 225 | }, |
| 226 | }; |
| 227 | |
| 228 | module_platform_driver(rockchip_emmc_driver); |
| 229 | |
| 230 | MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>"); |
| 231 | MODULE_DESCRIPTION("Rockchip EMMC PHY driver"); |
| 232 | MODULE_LICENSE("GPL v2"); |