blob: 00db0f8e34b6127ae7e697686fe1dde7d8237caa [file] [log] [blame]
Andrew Victorb85a8912006-12-01 14:37:56 +01001/*
Andrew Victord0760b32007-02-08 09:00:39 +01002 * linux/arch/arm/mach-at91/board-sam9260ek.c
Andrew Victorb85a8912006-12-01 14:37:56 +01003 *
4 * Copyright (C) 2005 SAN People
5 * Copyright (C) 2006 Atmel
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
Russell King2f8163b2011-07-26 10:53:52 +010023#include <linux/gpio.h>
Andrew Victorb85a8912006-12-01 14:37:56 +010024#include <linux/init.h>
25#include <linux/mm.h>
26#include <linux/module.h>
27#include <linux/platform_device.h>
28#include <linux/spi/spi.h>
Andrew Victor5e9df922008-04-02 22:18:35 +010029#include <linux/spi/at73c213.h>
30#include <linux/clk.h>
David Brownella745a622008-09-05 00:34:50 +010031#include <linux/i2c/at24.h>
Andrew Victor2e9f12d2008-09-21 21:32:40 +010032#include <linux/gpio_keys.h>
33#include <linux/input.h>
Andrew Victorb85a8912006-12-01 14:37:56 +010034
Andrew Victorb85a8912006-12-01 14:37:56 +010035#include <asm/setup.h>
36#include <asm/mach-types.h>
37#include <asm/irq.h>
38
39#include <asm/mach/arch.h>
40#include <asm/mach/map.h>
41#include <asm/mach/irq.h>
42
Andrew Victore5052402008-09-21 21:30:02 +010043#include <mach/hardware.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010044#include <mach/board.h>
Andrew Victor8cdae512008-10-06 20:05:35 +010045#include <mach/at91sam9_smc.h>
46#include <mach/at91_shdwc.h>
Jean-Christophe PLAGNIOL-VILLARD76b2ab72011-04-14 00:34:03 +080047#include <mach/system_rev.h>
Andrew Victorb85a8912006-12-01 14:37:56 +010048
Andrew Victor8cdae512008-10-06 20:05:35 +010049#include "sam9_smc.h"
Andrew Victorb85a8912006-12-01 14:37:56 +010050#include "generic.h"
51
52
Jean-Christophe PLAGNIOL-VILLARD1b021a32011-04-28 20:19:32 +080053static void __init ek_init_early(void)
Andrew Victorb85a8912006-12-01 14:37:56 +010054{
55 /* Initialize processor: 18.432 MHz crystal */
Jean-Christophe PLAGNIOL-VILLARD21d08b92011-04-23 15:28:34 +080056 at91_initialize(18432000);
Andrew Victorb85a8912006-12-01 14:37:56 +010057
Samuel R. C. Vale4f379402009-07-10 12:07:15 -030058 /* DBGU on ttyS0. (Rx & Tx only) */
Andrew Victora3da1222008-04-02 21:47:29 +010059 at91_register_uart(0, 0, 0);
60
61 /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
62 at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
63 | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
64 | ATMEL_UART_RI);
65
66 /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
67 at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
68
69 /* set serial console to ttyS0 (ie, DBGU) */
70 at91_set_serial_console(0);
Andrew Victorb85a8912006-12-01 14:37:56 +010071}
72
Andrew Victorb85a8912006-12-01 14:37:56 +010073/*
74 * USB Host port
75 */
76static struct at91_usbh_data __initdata ek_usbh_data = {
77 .ports = 2,
78};
79
80/*
81 * USB Device port
82 */
83static struct at91_udc_data __initdata ek_udc_data = {
84 .vbus_pin = AT91_PIN_PC5,
85 .pullup_pin = 0, /* pull-up driven by UDC */
86};
87
88
89/*
Andrew Victor5e9df922008-04-02 22:18:35 +010090 * Audio
91 */
92static struct at73c213_board_info at73c213_data = {
93 .ssc_id = 0,
94 .shortname = "AT91SAM9260-EK external DAC",
95};
96
97#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
98static void __init at73c213_set_clk(struct at73c213_board_info *info)
99{
100 struct clk *pck0;
101 struct clk *plla;
102
103 pck0 = clk_get(NULL, "pck0");
104 plla = clk_get(NULL, "plla");
105
106 /* AT73C213 MCK Clock */
107 at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */
108
109 clk_set_parent(pck0, plla);
110 clk_put(plla);
111
112 info->dac_clk = pck0;
113}
114#else
115static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
116#endif
117
118/*
Andrew Victorb85a8912006-12-01 14:37:56 +0100119 * SPI devices.
120 */
121static struct spi_board_info ek_spi_devices[] = {
122#if !defined(CONFIG_MMC_AT91)
123 { /* DataFlash chip */
124 .modalias = "mtd_dataflash",
125 .chip_select = 1,
126 .max_speed_hz = 15 * 1000 * 1000,
127 .bus_num = 0,
128 },
129#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
130 { /* DataFlash card */
131 .modalias = "mtd_dataflash",
132 .chip_select = 0,
133 .max_speed_hz = 15 * 1000 * 1000,
134 .bus_num = 0,
135 },
136#endif
137#endif
Andrew Victor93afa752007-05-03 14:39:41 +0100138#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
Andrew Victorb85a8912006-12-01 14:37:56 +0100139 { /* AT73C213 DAC */
Andrew Victor93afa752007-05-03 14:39:41 +0100140 .modalias = "at73c213",
Andrew Victorb85a8912006-12-01 14:37:56 +0100141 .chip_select = 0,
142 .max_speed_hz = 10 * 1000 * 1000,
143 .bus_num = 1,
Andrew Victor5e9df922008-04-02 22:18:35 +0100144 .mode = SPI_MODE_1,
145 .platform_data = &at73c213_data,
Andrew Victorb85a8912006-12-01 14:37:56 +0100146 },
147#endif
148};
149
150
151/*
152 * MACB Ethernet device
153 */
Sam Ravnborg3e18c8d2007-04-26 00:04:39 -0700154static struct at91_eth_data __initdata ek_macb_data = {
Andrew Victor44853a82006-12-08 11:24:18 +0100155 .phy_irq_pin = AT91_PIN_PA7,
Andrew Victorb85a8912006-12-01 14:37:56 +0100156 .is_rmii = 1,
157};
158
159
160/*
161 * NAND flash
162 */
163static struct mtd_partition __initdata ek_nand_partition[] = {
164 {
165 .name = "Partition 1",
166 .offset = 0,
Andrew Victore5052402008-09-21 21:30:02 +0100167 .size = SZ_256K,
Andrew Victorb85a8912006-12-01 14:37:56 +0100168 },
169 {
170 .name = "Partition 2",
Andrew Victore5052402008-09-21 21:30:02 +0100171 .offset = MTDPART_OFS_NXTBLK,
Andrew Victorb85a8912006-12-01 14:37:56 +0100172 .size = MTDPART_SIZ_FULL,
173 },
174};
175
HÃ¥vard Skinnemoen3c3796c2008-06-06 18:04:53 +0200176static struct atmel_nand_data __initdata ek_nand_data = {
Andrew Victorb85a8912006-12-01 14:37:56 +0100177 .ale = 21,
178 .cle = 22,
179// .det_pin = ... not connected
180 .rdy_pin = AT91_PIN_PC13,
181 .enable_pin = AT91_PIN_PC14,
Dmitry Eremin-Solenikov1754aab2011-05-29 17:49:22 +0400182 .parts = ek_nand_partition,
183 .num_parts = ARRAY_SIZE(ek_nand_partition),
Andrew Victorb85a8912006-12-01 14:37:56 +0100184};
185
Andrew Victor8cdae512008-10-06 20:05:35 +0100186static struct sam9_smc_config __initdata ek_nand_smc_config = {
187 .ncs_read_setup = 0,
188 .nrd_setup = 1,
189 .ncs_write_setup = 0,
190 .nwe_setup = 1,
191
192 .ncs_read_pulse = 3,
193 .nrd_pulse = 3,
194 .ncs_write_pulse = 3,
195 .nwe_pulse = 3,
196
197 .read_cycle = 5,
198 .write_cycle = 5,
199
200 .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
201 .tdf_cycles = 2,
202};
203
204static void __init ek_add_device_nand(void)
205{
Nicolas Ferre64393b32011-07-01 12:25:24 +0200206 ek_nand_data.bus_width_16 = board_have_nand_16bit();
Andrew Victor8cdae512008-10-06 20:05:35 +0100207 /* setup bus-width (8 or 16) */
208 if (ek_nand_data.bus_width_16)
209 ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
210 else
211 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
212
213 /* configure chip-select 3 (NAND) */
Jean-Christophe PLAGNIOL-VILLARDfaee0cc2011-10-14 01:37:09 +0800214 sam9_smc_configure(0, 3, &ek_nand_smc_config);
Andrew Victor8cdae512008-10-06 20:05:35 +0100215
216 at91_add_device_nand(&ek_nand_data);
217}
218
Andrew Victorb85a8912006-12-01 14:37:56 +0100219
220/*
221 * MCI (SD/MMC)
222 */
223static struct at91_mmc_data __initdata ek_mmc_data = {
224 .slot_b = 1,
225 .wire4 = 1,
226// .det_pin = ... not connected
227// .wp_pin = ... not connected
228// .vcc_pin = ... not connected
229};
230
Andrew Victor5b7659d2008-04-02 22:20:45 +0100231
232/*
233 * LEDs
234 */
235static struct gpio_led ek_leds[] = {
236 { /* "bottom" led, green, userled1 to be defined */
237 .name = "ds5",
238 .gpio = AT91_PIN_PA6,
239 .active_low = 1,
240 .default_trigger = "none",
241 },
242 { /* "power" led, yellow */
243 .name = "ds1",
244 .gpio = AT91_PIN_PA9,
245 .default_trigger = "heartbeat",
246 }
247};
248
David Brownella745a622008-09-05 00:34:50 +0100249/*
250 * I2C devices
251 */
252static struct at24_platform_data at24c512 = {
253 .byte_len = SZ_512K / 8,
254 .page_size = 128,
255 .flags = AT24_FLAG_ADDR16,
256};
257
258static struct i2c_board_info __initdata ek_i2c_devices[] = {
259 {
260 I2C_BOARD_INFO("24c512", 0x50),
261 .platform_data = &at24c512,
262 },
263 /* more devices can be added using expansion connectors */
264};
265
Andrew Victor2e9f12d2008-09-21 21:32:40 +0100266
267/*
268 * GPIO Buttons
269 */
270#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
271static struct gpio_keys_button ek_buttons[] = {
272 {
273 .gpio = AT91_PIN_PA30,
274 .code = BTN_3,
275 .desc = "Button 3",
276 .active_low = 1,
277 .wakeup = 1,
278 },
279 {
280 .gpio = AT91_PIN_PA31,
281 .code = BTN_4,
282 .desc = "Button 4",
283 .active_low = 1,
284 .wakeup = 1,
285 }
286};
287
288static struct gpio_keys_platform_data ek_button_data = {
289 .buttons = ek_buttons,
290 .nbuttons = ARRAY_SIZE(ek_buttons),
291};
292
293static struct platform_device ek_button_device = {
294 .name = "gpio-keys",
295 .id = -1,
296 .num_resources = 0,
297 .dev = {
298 .platform_data = &ek_button_data,
299 }
300};
301
302static void __init ek_add_device_buttons(void)
303{
304 at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
305 at91_set_deglitch(AT91_PIN_PA30, 1);
306 at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
307 at91_set_deglitch(AT91_PIN_PA31, 1);
308
309 platform_device_register(&ek_button_device);
310}
311#else
312static void __init ek_add_device_buttons(void) {}
313#endif
314
315
Andrew Victorb85a8912006-12-01 14:37:56 +0100316static void __init ek_board_init(void)
317{
318 /* Serial */
319 at91_add_device_serial();
320 /* USB Host */
321 at91_add_device_usbh(&ek_usbh_data);
322 /* USB Device */
323 at91_add_device_udc(&ek_udc_data);
324 /* SPI */
325 at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
326 /* NAND */
Andrew Victor8cdae512008-10-06 20:05:35 +0100327 ek_add_device_nand();
Andrew Victorb85a8912006-12-01 14:37:56 +0100328 /* Ethernet */
329 at91_add_device_eth(&ek_macb_data);
330 /* MMC */
Andrew Victord0760b32007-02-08 09:00:39 +0100331 at91_add_device_mmc(0, &ek_mmc_data);
Andrew Victor93afa752007-05-03 14:39:41 +0100332 /* I2C */
David Brownella745a622008-09-05 00:34:50 +0100333 at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
Andrew Victor5e9df922008-04-02 22:18:35 +0100334 /* SSC (to AT73C213) */
335 at73c213_set_clk(&at73c213_data);
336 at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
Andrew Victor5b7659d2008-04-02 22:20:45 +0100337 /* LEDs */
338 at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
Andrew Victor2e9f12d2008-09-21 21:32:40 +0100339 /* Push Buttons */
340 ek_add_device_buttons();
Andrew Victorb85a8912006-12-01 14:37:56 +0100341}
342
343MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
344 /* Maintainer: Atmel */
Andrew Victorb85a8912006-12-01 14:37:56 +0100345 .timer = &at91sam926x_timer,
Jean-Christophe PLAGNIOL-VILLARD21d08b92011-04-23 15:28:34 +0800346 .map_io = at91_map_io,
Jean-Christophe PLAGNIOL-VILLARD1b021a32011-04-28 20:19:32 +0800347 .init_early = ek_init_early,
Jean-Christophe PLAGNIOL-VILLARD92100c12011-04-23 15:28:34 +0800348 .init_irq = at91_init_irq_default,
Andrew Victorb85a8912006-12-01 14:37:56 +0100349 .init_machine = ek_board_init,
350MACHINE_END