| Dmitry Lifshitz | fb45105 | 2014-01-12 15:22:54 +0200 | [diff] [blame^] | 1 | /* |
| 2 | * Suppport for CompuLab SBC-T3517 with CM-T3517 |
| 3 | */ |
| 4 | |
| 5 | #include "omap3-cm-t3517.dts" |
| 6 | #include "omap3-sb-t35.dtsi" |
| 7 | |
| 8 | / { |
| 9 | model = "CompuLab SBC-T3517 with CM-T3517"; |
| 10 | compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3"; |
| 11 | }; |
| 12 | |
| 13 | &omap3_pmx_core { |
| 14 | pinctrl-names = "default"; |
| 15 | pinctrl-0 = < |
| 16 | &sb_t35_usb_hub_pins |
| 17 | &usb_hub_pins |
| 18 | >; |
| 19 | |
| 20 | mmc1_aux_pins: pinmux_mmc1_aux_pins { |
| 21 | pinctrl-single,pins = < |
| 22 | OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59 */ |
| 23 | OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */ |
| 24 | >; |
| 25 | }; |
| 26 | |
| 27 | sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins { |
| 28 | pinctrl-single,pins = < |
| 29 | OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */ |
| 30 | >; |
| 31 | }; |
| 32 | }; |
| 33 | |
| 34 | &mmc1 { |
| 35 | pinctrl-names = "default"; |
| 36 | pinctrl-0 = < |
| 37 | &mmc1_pins |
| 38 | &mmc1_aux_pins |
| 39 | >; |
| 40 | |
| 41 | wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */ |
| 42 | cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ |
| 43 | }; |