blob: e547ce14eefe354913112455e34ebfe91b6e8fdc [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001static const char version[] = "de600.c: $Revision: 1.41-2.5 $, Bjorn Ekwall (bj0rn@blox.se)\n";
2/*
3 * de600.c
4 *
5 * Linux driver for the D-Link DE-600 Ethernet pocket adapter.
6 *
7 * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall
8 * The Author may be reached as bj0rn@blox.se
9 *
10 * Based on adapter information gathered from DE600.ASM by D-Link Inc.,
11 * as included on disk C in the v.2.11 of PC/TCP from FTP Software.
12 * For DE600.asm:
13 * Portions (C) Copyright 1990 D-Link, Inc.
14 * Copyright, 1988-1992, Russell Nelson, Crynwr Software
15 *
16 * Adapted to the sample network driver core for linux,
17 * written by: Donald Becker <becker@super.org>
18 * (Now at <becker@scyld.com>)
19 *
20 **************************************************************/
21/*
22 * This program is free software; you can redistribute it and/or modify
23 * it under the terms of the GNU General Public License as published by
24 * the Free Software Foundation; either version 2, or (at your option)
25 * any later version.
26 *
27 * This program is distributed in the hope that it will be useful,
28 * but WITHOUT ANY WARRANTY; without even the implied warranty of
29 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
30 * GNU General Public License for more details.
31 *
32 * You should have received a copy of the GNU General Public License
33 * along with this program; if not, write to the Free Software
34 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
35 *
36 **************************************************************/
37
38/* Add more time here if your adapter won't work OK: */
39#define DE600_SLOW_DOWN udelay(delay_time)
40
Linus Torvalds1da177e2005-04-16 15:20:36 -070041/* use 0 for production, 1 for verification, >2 for debug */
42#ifdef DE600_DEBUG
43#define PRINTK(x) if (de600_debug >= 2) printk x
44#else
45#define DE600_DEBUG 0
46#define PRINTK(x) /**/
47#endif
48
49#include <linux/module.h>
50#include <linux/kernel.h>
51#include <linux/types.h>
52#include <linux/fcntl.h>
53#include <linux/string.h>
54#include <linux/interrupt.h>
55#include <linux/ioport.h>
56#include <linux/in.h>
57#include <asm/system.h>
58#include <linux/errno.h>
59#include <linux/init.h>
60#include <linux/delay.h>
61#include <linux/inet.h>
62#include <linux/netdevice.h>
63#include <linux/etherdevice.h>
64#include <linux/skbuff.h>
65
66#include <asm/io.h>
67
68#include "de600.h"
69
70static unsigned int de600_debug = DE600_DEBUG;
71module_param(de600_debug, int, 0);
72MODULE_PARM_DESC(de600_debug, "DE-600 debug level (0-2)");
73
74static unsigned int check_lost = 1;
75module_param(check_lost, bool, 0);
76MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600");
77
78static unsigned int delay_time = 10;
79module_param(delay_time, int, 0);
80MODULE_PARM_DESC(delay_time, "DE-600 deley on I/O in microseconds");
81
82
83/*
84 * D-Link driver variables:
85 */
86
87static volatile int rx_page;
88
89#define TX_PAGES 2
90static volatile int tx_fifo[TX_PAGES];
91static volatile int tx_fifo_in;
92static volatile int tx_fifo_out;
93static volatile int free_tx_pages = TX_PAGES;
94static int was_down;
95static DEFINE_SPINLOCK(de600_lock);
96
97static inline u8 de600_read_status(struct net_device *dev)
98{
99 u8 status;
100
101 outb_p(STATUS, DATA_PORT);
102 status = inb(STATUS_PORT);
103 outb_p(NULL_COMMAND | HI_NIBBLE, DATA_PORT);
104
105 return status;
106}
107
108static inline u8 de600_read_byte(unsigned char type, struct net_device *dev)
109{
110 /* dev used by macros */
111 u8 lo;
112 outb_p((type), DATA_PORT);
113 lo = ((unsigned char)inb(STATUS_PORT)) >> 4;
114 outb_p((type) | HI_NIBBLE, DATA_PORT);
115 return ((unsigned char)inb(STATUS_PORT) & (unsigned char)0xf0) | lo;
116}
117
118/*
119 * Open/initialize the board. This is called (in the current kernel)
120 * after booting when 'ifconfig <dev->name> $IP_ADDR' is run (in rc.inet1).
121 *
122 * This routine should set everything up anew at each open, even
123 * registers that "should" only need to be set once at boot, so that
124 * there is a non-reboot way to recover if something goes wrong.
125 */
126
127static int de600_open(struct net_device *dev)
128{
129 unsigned long flags;
130 int ret = request_irq(DE600_IRQ, de600_interrupt, 0, dev->name, dev);
131 if (ret) {
132 printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, DE600_IRQ);
133 return ret;
134 }
135 spin_lock_irqsave(&de600_lock, flags);
136 ret = adapter_init(dev);
137 spin_unlock_irqrestore(&de600_lock, flags);
138 return ret;
139}
140
141/*
142 * The inverse routine to de600_open().
143 */
144
145static int de600_close(struct net_device *dev)
146{
147 select_nic();
148 rx_page = 0;
149 de600_put_command(RESET);
150 de600_put_command(STOP_RESET);
151 de600_put_command(0);
152 select_prn();
153 free_irq(DE600_IRQ, dev);
154 return 0;
155}
156
157static struct net_device_stats *get_stats(struct net_device *dev)
158{
159 return (struct net_device_stats *)(dev->priv);
160}
161
162static inline void trigger_interrupt(struct net_device *dev)
163{
164 de600_put_command(FLIP_IRQ);
165 select_prn();
166 DE600_SLOW_DOWN;
167 select_nic();
168 de600_put_command(0);
169}
170
171/*
172 * Copy a buffer to the adapter transmit page memory.
173 * Start sending.
174 */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400175
Linus Torvalds1da177e2005-04-16 15:20:36 -0700176static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev)
177{
178 unsigned long flags;
179 int transmit_from;
180 int len;
181 int tickssofar;
182 u8 *buffer = skb->data;
183 int i;
184
185 if (free_tx_pages <= 0) { /* Do timeouts, to avoid hangs. */
186 tickssofar = jiffies - dev->trans_start;
187 if (tickssofar < 5)
188 return 1;
189 /* else */
190 printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem");
191 /* Restart the adapter. */
192 spin_lock_irqsave(&de600_lock, flags);
193 if (adapter_init(dev)) {
194 spin_unlock_irqrestore(&de600_lock, flags);
195 return 1;
196 }
197 spin_unlock_irqrestore(&de600_lock, flags);
198 }
199
200 /* Start real output */
201 PRINTK(("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages));
202
203 if ((len = skb->len) < RUNT)
204 len = RUNT;
205
206 spin_lock_irqsave(&de600_lock, flags);
207 select_nic();
208 tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len;
209 tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */
210
211 if(check_lost)
212 {
213 /* This costs about 40 instructions per packet... */
214 de600_setup_address(NODE_ADDRESS, RW_ADDR);
215 de600_read_byte(READ_DATA, dev);
216 if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) {
217 if (adapter_init(dev)) {
218 spin_unlock_irqrestore(&de600_lock, flags);
219 return 1;
220 }
221 }
222 }
223
224 de600_setup_address(transmit_from, RW_ADDR);
225 for (i = 0; i < skb->len ; ++i, ++buffer)
226 de600_put_byte(*buffer);
227 for (; i < len; ++i)
228 de600_put_byte(0);
229
230 if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */
231 dev->trans_start = jiffies;
232 netif_start_queue(dev); /* allow more packets into adapter */
233 /* Send page and generate a faked interrupt */
234 de600_setup_address(transmit_from, TX_ADDR);
235 de600_put_command(TX_ENABLE);
236 }
237 else {
238 if (free_tx_pages)
239 netif_start_queue(dev);
240 else
241 netif_stop_queue(dev);
242 select_prn();
243 }
244 spin_unlock_irqrestore(&de600_lock, flags);
245 dev_kfree_skb(skb);
246 return 0;
247}
248
249/*
250 * The typical workload of the driver:
251 * Handle the network interface interrupts.
252 */
253
David Howells7d12e782006-10-05 14:55:46 +0100254static irqreturn_t de600_interrupt(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700255{
256 struct net_device *dev = dev_id;
257 u8 irq_status;
258 int retrig = 0;
259 int boguscount = 0;
260
Linus Torvalds1da177e2005-04-16 15:20:36 -0700261 spin_lock(&de600_lock);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400262
Linus Torvalds1da177e2005-04-16 15:20:36 -0700263 select_nic();
264 irq_status = de600_read_status(dev);
265
266 do {
267 PRINTK(("de600_interrupt (%02X)\n", irq_status));
268
269 if (irq_status & RX_GOOD)
270 de600_rx_intr(dev);
271 else if (!(irq_status & RX_BUSY))
272 de600_put_command(RX_ENABLE);
273
274 /* Any transmission in progress? */
275 if (free_tx_pages < TX_PAGES)
276 retrig = de600_tx_intr(dev, irq_status);
277 else
278 retrig = 0;
279
280 irq_status = de600_read_status(dev);
281 } while ( (irq_status & RX_GOOD) || ((++boguscount < 100) && retrig) );
282 /*
283 * Yeah, it _looks_ like busy waiting, smells like busy waiting
284 * and I know it's not PC, but please, it will only occur once
285 * in a while and then only for a loop or so (< 1ms for sure!)
286 */
287
288 /* Enable adapter interrupts */
289 select_prn();
290 if (retrig)
291 trigger_interrupt(dev);
292 spin_unlock(&de600_lock);
293 return IRQ_HANDLED;
294}
295
296static int de600_tx_intr(struct net_device *dev, int irq_status)
297{
298 /*
299 * Returns 1 if tx still not done
300 */
301
302 /* Check if current transmission is done yet */
303 if (irq_status & TX_BUSY)
304 return 1; /* tx not done, try again */
305
306 /* else */
307 /* If last transmission OK then bump fifo index */
308 if (!(irq_status & TX_FAILED16)) {
309 tx_fifo_out = (tx_fifo_out + 1) % TX_PAGES;
310 ++free_tx_pages;
311 ((struct net_device_stats *)(dev->priv))->tx_packets++;
312 netif_wake_queue(dev);
313 }
314
315 /* More to send, or resend last packet? */
316 if ((free_tx_pages < TX_PAGES) || (irq_status & TX_FAILED16)) {
317 dev->trans_start = jiffies;
318 de600_setup_address(tx_fifo[tx_fifo_out], TX_ADDR);
319 de600_put_command(TX_ENABLE);
320 return 1;
321 }
322 /* else */
323
324 return 0;
325}
326
327/*
328 * We have a good packet, get it out of the adapter.
329 */
330static void de600_rx_intr(struct net_device *dev)
331{
332 struct sk_buff *skb;
333 int i;
334 int read_from;
335 int size;
336 unsigned char *buffer;
337
338 /* Get size of received packet */
339 size = de600_read_byte(RX_LEN, dev); /* low byte */
340 size += (de600_read_byte(RX_LEN, dev) << 8); /* high byte */
341 size -= 4; /* Ignore trailing 4 CRC-bytes */
342
343 /* Tell adapter where to store next incoming packet, enable receiver */
344 read_from = rx_page_adr();
345 next_rx_page();
346 de600_put_command(RX_ENABLE);
347
348 if ((size < 32) || (size > 1535)) {
349 printk(KERN_WARNING "%s: Bogus packet size %d.\n", dev->name, size);
350 if (size > 10000)
351 adapter_init(dev);
352 return;
353 }
354
355 skb = dev_alloc_skb(size+2);
356 if (skb == NULL) {
357 printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size);
358 return;
359 }
360 /* else */
361
362 skb->dev = dev;
363 skb_reserve(skb,2); /* Align */
364
365 /* 'skb->data' points to the start of sk_buff data area. */
366 buffer = skb_put(skb,size);
367
368 /* copy the packet into the buffer */
369 de600_setup_address(read_from, RW_ADDR);
370 for (i = size; i > 0; --i, ++buffer)
371 *buffer = de600_read_byte(READ_DATA, dev);
372
373 skb->protocol=eth_type_trans(skb,dev);
374
375 netif_rx(skb);
376
377 /* update stats */
378 dev->last_rx = jiffies;
379 ((struct net_device_stats *)(dev->priv))->rx_packets++; /* count all receives */
380 ((struct net_device_stats *)(dev->priv))->rx_bytes += size; /* count all received bytes */
381
382 /*
383 * If any worth-while packets have been received, netif_rx()
384 * will work on them when we get to the tasklets.
385 */
386}
387
388static struct net_device * __init de600_probe(void)
389{
390 int i;
391 struct net_device *dev;
392 int err;
393
394 dev = alloc_etherdev(sizeof(struct net_device_stats));
395 if (!dev)
396 return ERR_PTR(-ENOMEM);
397
398 SET_MODULE_OWNER(dev);
399
400 if (!request_region(DE600_IO, 3, "de600")) {
401 printk(KERN_WARNING "DE600: port 0x%x busy\n", DE600_IO);
402 err = -EBUSY;
403 goto out;
404 }
405
406 printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name);
407 /* Alpha testers must have the version number to report bugs. */
408 if (de600_debug > 1)
409 printk(version);
410
411 /* probe for adapter */
412 err = -ENODEV;
413 rx_page = 0;
414 select_nic();
415 (void)de600_read_status(dev);
416 de600_put_command(RESET);
417 de600_put_command(STOP_RESET);
418 if (de600_read_status(dev) & 0xf0) {
419 printk(": not at I/O %#3x.\n", DATA_PORT);
420 goto out1;
421 }
422
423 /*
424 * Maybe we found one,
425 * have to check if it is a D-Link DE-600 adapter...
426 */
427
428 /* Get the adapter ethernet address from the ROM */
429 de600_setup_address(NODE_ADDRESS, RW_ADDR);
430 for (i = 0; i < ETH_ALEN; i++) {
431 dev->dev_addr[i] = de600_read_byte(READ_DATA, dev);
432 dev->broadcast[i] = 0xff;
433 }
434
435 /* Check magic code */
436 if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) {
437 /* OK, install real address */
438 dev->dev_addr[0] = 0x00;
439 dev->dev_addr[1] = 0x80;
440 dev->dev_addr[2] = 0xc8;
441 dev->dev_addr[3] &= 0x0f;
442 dev->dev_addr[3] |= 0x70;
443 } else {
444 printk(" not identified in the printer port\n");
445 goto out1;
446 }
447
448 printk(", Ethernet Address: %02X", dev->dev_addr[0]);
449 for (i = 1; i < ETH_ALEN; i++)
450 printk(":%02X",dev->dev_addr[i]);
451 printk("\n");
452
453 dev->get_stats = get_stats;
454
455 dev->open = de600_open;
456 dev->stop = de600_close;
457 dev->hard_start_xmit = &de600_start_xmit;
458
459 dev->flags&=~IFF_MULTICAST;
460
461 select_prn();
462
463 err = register_netdev(dev);
464 if (err)
465 goto out1;
466
467 return dev;
468
469out1:
470 release_region(DE600_IO, 3);
471out:
472 free_netdev(dev);
473 return ERR_PTR(err);
474}
475
476static int adapter_init(struct net_device *dev)
477{
478 int i;
479
480 select_nic();
481 rx_page = 0; /* used by RESET */
482 de600_put_command(RESET);
483 de600_put_command(STOP_RESET);
484
485 /* Check if it is still there... */
486 /* Get the some bytes of the adapter ethernet address from the ROM */
487 de600_setup_address(NODE_ADDRESS, RW_ADDR);
488 de600_read_byte(READ_DATA, dev);
489 if ((de600_read_byte(READ_DATA, dev) != 0xde) ||
490 (de600_read_byte(READ_DATA, dev) != 0x15)) {
491 /* was: if (de600_read_status(dev) & 0xf0) { */
492 printk("Something has happened to the DE-600! Please check it and do a new ifconfig!\n");
493 /* Goodbye, cruel world... */
494 dev->flags &= ~IFF_UP;
495 de600_close(dev);
496 was_down = 1;
497 netif_stop_queue(dev); /* Transmit busy... */
498 return 1; /* failed */
499 }
500
501 if (was_down) {
502 printk(KERN_INFO "%s: Thanks, I feel much better now!\n", dev->name);
503 was_down = 0;
504 }
505
506 tx_fifo_in = 0;
507 tx_fifo_out = 0;
508 free_tx_pages = TX_PAGES;
509
510
511 /* set the ether address. */
512 de600_setup_address(NODE_ADDRESS, RW_ADDR);
513 for (i = 0; i < ETH_ALEN; i++)
514 de600_put_byte(dev->dev_addr[i]);
515
516 /* where to start saving incoming packets */
517 rx_page = RX_BP | RX_BASE_PAGE;
518 de600_setup_address(MEM_4K, RW_ADDR);
519 /* Enable receiver */
520 de600_put_command(RX_ENABLE);
521 select_prn();
522
523 netif_start_queue(dev);
524
525 return 0; /* OK */
526}
527
528static struct net_device *de600_dev;
529
530static int __init de600_init(void)
531{
532 de600_dev = de600_probe();
533 if (IS_ERR(de600_dev))
534 return PTR_ERR(de600_dev);
535 return 0;
536}
537
538static void __exit de600_exit(void)
539{
540 unregister_netdev(de600_dev);
541 release_region(DE600_IO, 3);
542 free_netdev(de600_dev);
543}
544
545module_init(de600_init);
546module_exit(de600_exit);
547
548MODULE_LICENSE("GPL");