Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 1 | /* |
| 2 | * xHCI host controller driver |
| 3 | * |
| 4 | * Copyright (C) 2008 Intel Corp. |
| 5 | * |
| 6 | * Author: Sarah Sharp |
| 7 | * Some code borrowed from the Linux EHCI driver. |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License version 2 as |
| 11 | * published by the Free Software Foundation. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, but |
| 14 | * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| 15 | * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| 16 | * for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software Foundation, |
| 20 | * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 21 | */ |
| 22 | |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 23 | #include <linux/pci.h> |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 24 | #include <linux/irq.h> |
Sarah Sharp | 8df75f4 | 2010-04-02 15:34:16 -0700 | [diff] [blame] | 25 | #include <linux/log2.h> |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 26 | #include <linux/module.h> |
Sarah Sharp | b0567b3 | 2009-08-07 14:04:36 -0700 | [diff] [blame] | 27 | #include <linux/moduleparam.h> |
Tejun Heo | 5a0e3ad | 2010-03-24 17:04:11 +0900 | [diff] [blame] | 28 | #include <linux/slab.h> |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 29 | |
| 30 | #include "xhci.h" |
| 31 | |
| 32 | #define DRIVER_AUTHOR "Sarah Sharp" |
| 33 | #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" |
| 34 | |
Sarah Sharp | b0567b3 | 2009-08-07 14:04:36 -0700 | [diff] [blame] | 35 | /* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */ |
| 36 | static int link_quirk; |
| 37 | module_param(link_quirk, int, S_IRUGO | S_IWUSR); |
| 38 | MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); |
| 39 | |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 40 | /* TODO: copied from ehci-hcd.c - can this be refactored? */ |
| 41 | /* |
| 42 | * handshake - spin reading hc until handshake completes or fails |
| 43 | * @ptr: address of hc register to be read |
| 44 | * @mask: bits to look at in result of read |
| 45 | * @done: value of those bits when handshake succeeds |
| 46 | * @usec: timeout in microseconds |
| 47 | * |
| 48 | * Returns negative errno, or zero on success |
| 49 | * |
| 50 | * Success happens when the "mask" bits have the specified value (hardware |
| 51 | * handshake done). There are two failure modes: "usec" have passed (major |
| 52 | * hardware flakeout), or the register reads as all-ones (hardware removed). |
| 53 | */ |
| 54 | static int handshake(struct xhci_hcd *xhci, void __iomem *ptr, |
| 55 | u32 mask, u32 done, int usec) |
| 56 | { |
| 57 | u32 result; |
| 58 | |
| 59 | do { |
| 60 | result = xhci_readl(xhci, ptr); |
| 61 | if (result == ~(u32)0) /* card removed */ |
| 62 | return -ENODEV; |
| 63 | result &= mask; |
| 64 | if (result == done) |
| 65 | return 0; |
| 66 | udelay(1); |
| 67 | usec--; |
| 68 | } while (usec > 0); |
| 69 | return -ETIMEDOUT; |
| 70 | } |
| 71 | |
| 72 | /* |
Sarah Sharp | 4f0f0ba | 2009-10-27 10:56:33 -0700 | [diff] [blame] | 73 | * Disable interrupts and begin the xHCI halting process. |
| 74 | */ |
| 75 | void xhci_quiesce(struct xhci_hcd *xhci) |
| 76 | { |
| 77 | u32 halted; |
| 78 | u32 cmd; |
| 79 | u32 mask; |
| 80 | |
| 81 | mask = ~(XHCI_IRQS); |
| 82 | halted = xhci_readl(xhci, &xhci->op_regs->status) & STS_HALT; |
| 83 | if (!halted) |
| 84 | mask &= ~CMD_RUN; |
| 85 | |
| 86 | cmd = xhci_readl(xhci, &xhci->op_regs->command); |
| 87 | cmd &= mask; |
| 88 | xhci_writel(xhci, cmd, &xhci->op_regs->command); |
| 89 | } |
| 90 | |
| 91 | /* |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 92 | * Force HC into halt state. |
| 93 | * |
| 94 | * Disable any IRQs and clear the run/stop bit. |
| 95 | * HC will complete any current and actively pipelined transactions, and |
Andiry Xu | bdfca50 | 2011-01-06 15:43:39 +0800 | [diff] [blame] | 96 | * should halt within 16 ms of the run/stop bit being cleared. |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 97 | * Read HC Halted bit in the status register to see when the HC is finished. |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 98 | */ |
| 99 | int xhci_halt(struct xhci_hcd *xhci) |
| 100 | { |
Sarah Sharp | c6cc27c | 2011-03-11 10:20:58 -0800 | [diff] [blame] | 101 | int ret; |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 102 | xhci_dbg(xhci, "// Halt the HC\n"); |
Sarah Sharp | 4f0f0ba | 2009-10-27 10:56:33 -0700 | [diff] [blame] | 103 | xhci_quiesce(xhci); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 104 | |
Sarah Sharp | c6cc27c | 2011-03-11 10:20:58 -0800 | [diff] [blame] | 105 | ret = handshake(xhci, &xhci->op_regs->status, |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 106 | STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); |
Sarah Sharp | c6cc27c | 2011-03-11 10:20:58 -0800 | [diff] [blame] | 107 | if (!ret) |
| 108 | xhci->xhc_state |= XHCI_STATE_HALTED; |
| 109 | return ret; |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 110 | } |
| 111 | |
| 112 | /* |
Sarah Sharp | ed07453 | 2010-05-24 13:25:21 -0700 | [diff] [blame] | 113 | * Set the run bit and wait for the host to be running. |
| 114 | */ |
Dmitry Torokhov | 8212a49 | 2011-02-08 13:55:59 -0800 | [diff] [blame] | 115 | static int xhci_start(struct xhci_hcd *xhci) |
Sarah Sharp | ed07453 | 2010-05-24 13:25:21 -0700 | [diff] [blame] | 116 | { |
| 117 | u32 temp; |
| 118 | int ret; |
| 119 | |
| 120 | temp = xhci_readl(xhci, &xhci->op_regs->command); |
| 121 | temp |= (CMD_RUN); |
| 122 | xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n", |
| 123 | temp); |
| 124 | xhci_writel(xhci, temp, &xhci->op_regs->command); |
| 125 | |
| 126 | /* |
| 127 | * Wait for the HCHalted Status bit to be 0 to indicate the host is |
| 128 | * running. |
| 129 | */ |
| 130 | ret = handshake(xhci, &xhci->op_regs->status, |
| 131 | STS_HALT, 0, XHCI_MAX_HALT_USEC); |
| 132 | if (ret == -ETIMEDOUT) |
| 133 | xhci_err(xhci, "Host took too long to start, " |
| 134 | "waited %u microseconds.\n", |
| 135 | XHCI_MAX_HALT_USEC); |
Sarah Sharp | c6cc27c | 2011-03-11 10:20:58 -0800 | [diff] [blame] | 136 | if (!ret) |
| 137 | xhci->xhc_state &= ~XHCI_STATE_HALTED; |
Sarah Sharp | ed07453 | 2010-05-24 13:25:21 -0700 | [diff] [blame] | 138 | return ret; |
| 139 | } |
| 140 | |
| 141 | /* |
Sarah Sharp | ac04e6f | 2011-03-11 08:47:33 -0800 | [diff] [blame] | 142 | * Reset a halted HC. |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 143 | * |
| 144 | * This resets pipelines, timers, counters, state machines, etc. |
| 145 | * Transactions will be terminated immediately, and operational registers |
| 146 | * will be set to their defaults. |
| 147 | */ |
| 148 | int xhci_reset(struct xhci_hcd *xhci) |
| 149 | { |
| 150 | u32 command; |
| 151 | u32 state; |
Sarah Sharp | 2d62f3e | 2010-05-24 13:25:15 -0700 | [diff] [blame] | 152 | int ret; |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 153 | |
| 154 | state = xhci_readl(xhci, &xhci->op_regs->status); |
Sarah Sharp | d3512f6 | 2009-07-27 12:03:50 -0700 | [diff] [blame] | 155 | if ((state & STS_HALT) == 0) { |
| 156 | xhci_warn(xhci, "Host controller not halted, aborting reset.\n"); |
| 157 | return 0; |
| 158 | } |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 159 | |
| 160 | xhci_dbg(xhci, "// Reset the HC\n"); |
| 161 | command = xhci_readl(xhci, &xhci->op_regs->command); |
| 162 | command |= CMD_RESET; |
| 163 | xhci_writel(xhci, command, &xhci->op_regs->command); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 164 | |
Sarah Sharp | 2d62f3e | 2010-05-24 13:25:15 -0700 | [diff] [blame] | 165 | ret = handshake(xhci, &xhci->op_regs->command, |
| 166 | CMD_RESET, 0, 250 * 1000); |
| 167 | if (ret) |
| 168 | return ret; |
| 169 | |
| 170 | xhci_dbg(xhci, "Wait for controller to be ready for doorbell rings\n"); |
| 171 | /* |
| 172 | * xHCI cannot write to any doorbells or operational registers other |
| 173 | * than status until the "Controller Not Ready" flag is cleared. |
| 174 | */ |
| 175 | return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 176 | } |
| 177 | |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 178 | /* |
| 179 | * Free IRQs |
| 180 | * free all IRQs request |
| 181 | */ |
| 182 | static void xhci_free_irq(struct xhci_hcd *xhci) |
| 183 | { |
| 184 | int i; |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 185 | struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); |
| 186 | |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 187 | /* return if using legacy interrupt */ |
| 188 | if (xhci_to_hcd(xhci)->irq >= 0) |
| 189 | return; |
| 190 | |
| 191 | if (xhci->msix_entries) { |
| 192 | for (i = 0; i < xhci->msix_count; i++) |
| 193 | if (xhci->msix_entries[i].vector) |
| 194 | free_irq(xhci->msix_entries[i].vector, |
| 195 | xhci_to_hcd(xhci)); |
| 196 | } else if (pdev->irq >= 0) |
| 197 | free_irq(pdev->irq, xhci_to_hcd(xhci)); |
| 198 | |
| 199 | return; |
| 200 | } |
| 201 | |
| 202 | /* |
| 203 | * Set up MSI |
| 204 | */ |
| 205 | static int xhci_setup_msi(struct xhci_hcd *xhci) |
| 206 | { |
| 207 | int ret; |
| 208 | struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); |
| 209 | |
| 210 | ret = pci_enable_msi(pdev); |
| 211 | if (ret) { |
| 212 | xhci_err(xhci, "failed to allocate MSI entry\n"); |
| 213 | return ret; |
| 214 | } |
| 215 | |
| 216 | ret = request_irq(pdev->irq, (irq_handler_t)xhci_msi_irq, |
| 217 | 0, "xhci_hcd", xhci_to_hcd(xhci)); |
| 218 | if (ret) { |
| 219 | xhci_err(xhci, "disable MSI interrupt\n"); |
| 220 | pci_disable_msi(pdev); |
| 221 | } |
| 222 | |
| 223 | return ret; |
| 224 | } |
| 225 | |
| 226 | /* |
| 227 | * Set up MSI-X |
| 228 | */ |
| 229 | static int xhci_setup_msix(struct xhci_hcd *xhci) |
| 230 | { |
| 231 | int i, ret = 0; |
Andiry Xu | 0029227 | 2010-12-27 17:39:02 +0800 | [diff] [blame] | 232 | struct usb_hcd *hcd = xhci_to_hcd(xhci); |
| 233 | struct pci_dev *pdev = to_pci_dev(hcd->self.controller); |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 234 | |
| 235 | /* |
| 236 | * calculate number of msi-x vectors supported. |
| 237 | * - HCS_MAX_INTRS: the max number of interrupts the host can handle, |
| 238 | * with max number of interrupters based on the xhci HCSPARAMS1. |
| 239 | * - num_online_cpus: maximum msi-x vectors per CPUs core. |
| 240 | * Add additional 1 vector to ensure always available interrupt. |
| 241 | */ |
| 242 | xhci->msix_count = min(num_online_cpus() + 1, |
| 243 | HCS_MAX_INTRS(xhci->hcs_params1)); |
| 244 | |
| 245 | xhci->msix_entries = |
| 246 | kmalloc((sizeof(struct msix_entry))*xhci->msix_count, |
Greg Kroah-Hartman | 8687197 | 2010-11-11 09:41:02 -0800 | [diff] [blame] | 247 | GFP_KERNEL); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 248 | if (!xhci->msix_entries) { |
| 249 | xhci_err(xhci, "Failed to allocate MSI-X entries\n"); |
| 250 | return -ENOMEM; |
| 251 | } |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 252 | |
| 253 | for (i = 0; i < xhci->msix_count; i++) { |
| 254 | xhci->msix_entries[i].entry = i; |
| 255 | xhci->msix_entries[i].vector = 0; |
| 256 | } |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 257 | |
| 258 | ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count); |
| 259 | if (ret) { |
| 260 | xhci_err(xhci, "Failed to enable MSI-X\n"); |
| 261 | goto free_entries; |
| 262 | } |
| 263 | |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 264 | for (i = 0; i < xhci->msix_count; i++) { |
| 265 | ret = request_irq(xhci->msix_entries[i].vector, |
| 266 | (irq_handler_t)xhci_msi_irq, |
| 267 | 0, "xhci_hcd", xhci_to_hcd(xhci)); |
| 268 | if (ret) |
| 269 | goto disable_msix; |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 270 | } |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 271 | |
Andiry Xu | 0029227 | 2010-12-27 17:39:02 +0800 | [diff] [blame] | 272 | hcd->msix_enabled = 1; |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 273 | return ret; |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 274 | |
| 275 | disable_msix: |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 276 | xhci_err(xhci, "disable MSI-X interrupt\n"); |
| 277 | xhci_free_irq(xhci); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 278 | pci_disable_msix(pdev); |
| 279 | free_entries: |
| 280 | kfree(xhci->msix_entries); |
| 281 | xhci->msix_entries = NULL; |
| 282 | return ret; |
| 283 | } |
| 284 | |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 285 | /* Free any IRQs and disable MSI-X */ |
| 286 | static void xhci_cleanup_msix(struct xhci_hcd *xhci) |
| 287 | { |
Andiry Xu | 0029227 | 2010-12-27 17:39:02 +0800 | [diff] [blame] | 288 | struct usb_hcd *hcd = xhci_to_hcd(xhci); |
| 289 | struct pci_dev *pdev = to_pci_dev(hcd->self.controller); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 290 | |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 291 | xhci_free_irq(xhci); |
| 292 | |
| 293 | if (xhci->msix_entries) { |
| 294 | pci_disable_msix(pdev); |
| 295 | kfree(xhci->msix_entries); |
| 296 | xhci->msix_entries = NULL; |
| 297 | } else { |
| 298 | pci_disable_msi(pdev); |
| 299 | } |
| 300 | |
Andiry Xu | 0029227 | 2010-12-27 17:39:02 +0800 | [diff] [blame] | 301 | hcd->msix_enabled = 0; |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 302 | return; |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 303 | } |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 304 | |
| 305 | /* |
| 306 | * Initialize memory for HCD and xHC (one-time init). |
| 307 | * |
| 308 | * Program the PAGESIZE register, initialize the device context array, create |
| 309 | * device contexts (?), set up a command ring segment (or two?), create event |
| 310 | * ring (one for now). |
| 311 | */ |
| 312 | int xhci_init(struct usb_hcd *hcd) |
| 313 | { |
| 314 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 315 | int retval = 0; |
| 316 | |
| 317 | xhci_dbg(xhci, "xhci_init\n"); |
| 318 | spin_lock_init(&xhci->lock); |
Sarah Sharp | b0567b3 | 2009-08-07 14:04:36 -0700 | [diff] [blame] | 319 | if (link_quirk) { |
| 320 | xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n"); |
| 321 | xhci->quirks |= XHCI_LINK_TRB_QUIRK; |
| 322 | } else { |
Sarah Sharp | ac9d8fe | 2009-08-07 14:04:55 -0700 | [diff] [blame] | 323 | xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n"); |
Sarah Sharp | b0567b3 | 2009-08-07 14:04:36 -0700 | [diff] [blame] | 324 | } |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 325 | retval = xhci_mem_init(xhci, GFP_KERNEL); |
| 326 | xhci_dbg(xhci, "Finished xhci_init\n"); |
| 327 | |
| 328 | return retval; |
| 329 | } |
| 330 | |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 331 | /*-------------------------------------------------------------------------*/ |
| 332 | |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 333 | |
| 334 | #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING |
Dmitry Torokhov | 8212a49 | 2011-02-08 13:55:59 -0800 | [diff] [blame] | 335 | static void xhci_event_ring_work(unsigned long arg) |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 336 | { |
| 337 | unsigned long flags; |
| 338 | int temp; |
Sarah Sharp | 8e595a5 | 2009-07-27 12:03:31 -0700 | [diff] [blame] | 339 | u64 temp_64; |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 340 | struct xhci_hcd *xhci = (struct xhci_hcd *) arg; |
| 341 | int i, j; |
| 342 | |
| 343 | xhci_dbg(xhci, "Poll event ring: %lu\n", jiffies); |
| 344 | |
| 345 | spin_lock_irqsave(&xhci->lock, flags); |
| 346 | temp = xhci_readl(xhci, &xhci->op_regs->status); |
| 347 | xhci_dbg(xhci, "op reg status = 0x%x\n", temp); |
Sarah Sharp | 6f5165c | 2009-10-27 10:57:01 -0700 | [diff] [blame] | 348 | if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING)) { |
Sarah Sharp | e4ab05d | 2009-09-16 16:42:30 -0700 | [diff] [blame] | 349 | xhci_dbg(xhci, "HW died, polling stopped.\n"); |
| 350 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 351 | return; |
| 352 | } |
| 353 | |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 354 | temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); |
| 355 | xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp); |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 356 | xhci_dbg(xhci, "HC error bitmask = 0x%x\n", xhci->error_bitmask); |
| 357 | xhci->error_bitmask = 0; |
| 358 | xhci_dbg(xhci, "Event ring:\n"); |
| 359 | xhci_debug_segment(xhci, xhci->event_ring->deq_seg); |
| 360 | xhci_dbg_ring_ptrs(xhci, xhci->event_ring); |
Sarah Sharp | 8e595a5 | 2009-07-27 12:03:31 -0700 | [diff] [blame] | 361 | temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); |
| 362 | temp_64 &= ~ERST_PTR_MASK; |
| 363 | xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64); |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 364 | xhci_dbg(xhci, "Command ring:\n"); |
| 365 | xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg); |
| 366 | xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); |
| 367 | xhci_dbg_cmd_ptrs(xhci); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 368 | for (i = 0; i < MAX_HC_SLOTS; ++i) { |
Sarah Sharp | 63a0d9a | 2009-09-04 10:53:09 -0700 | [diff] [blame] | 369 | if (!xhci->devs[i]) |
| 370 | continue; |
| 371 | for (j = 0; j < 31; ++j) { |
Sarah Sharp | e9df17e | 2010-04-02 15:34:43 -0700 | [diff] [blame] | 372 | xhci_dbg_ep_rings(xhci, i, j, &xhci->devs[i]->eps[j]); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 373 | } |
| 374 | } |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 375 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 376 | |
| 377 | if (!xhci->zombie) |
| 378 | mod_timer(&xhci->event_ring_timer, jiffies + POLL_TIMEOUT * HZ); |
| 379 | else |
| 380 | xhci_dbg(xhci, "Quit polling the event ring.\n"); |
| 381 | } |
| 382 | #endif |
| 383 | |
Sarah Sharp | f6ff0ac | 2010-12-16 11:21:10 -0800 | [diff] [blame] | 384 | static int xhci_run_finished(struct xhci_hcd *xhci) |
| 385 | { |
| 386 | if (xhci_start(xhci)) { |
| 387 | xhci_halt(xhci); |
| 388 | return -ENODEV; |
| 389 | } |
| 390 | xhci->shared_hcd->state = HC_STATE_RUNNING; |
| 391 | |
| 392 | if (xhci->quirks & XHCI_NEC_HOST) |
| 393 | xhci_ring_cmd_db(xhci); |
| 394 | |
| 395 | xhci_dbg(xhci, "Finished xhci_run for USB3 roothub\n"); |
| 396 | return 0; |
| 397 | } |
| 398 | |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 399 | /* |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 400 | * Start the HC after it was halted. |
| 401 | * |
| 402 | * This function is called by the USB core when the HC driver is added. |
| 403 | * Its opposite is xhci_stop(). |
| 404 | * |
| 405 | * xhci_init() must be called once before this function can be called. |
| 406 | * Reset the HC, enable device slot contexts, program DCBAAP, and |
| 407 | * set command ring pointer and event ring pointer. |
| 408 | * |
| 409 | * Setup MSI-X vectors and enable interrupts. |
| 410 | */ |
| 411 | int xhci_run(struct usb_hcd *hcd) |
| 412 | { |
| 413 | u32 temp; |
Sarah Sharp | 8e595a5 | 2009-07-27 12:03:31 -0700 | [diff] [blame] | 414 | u64 temp_64; |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 415 | u32 ret; |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 416 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 417 | struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 418 | |
Sarah Sharp | f6ff0ac | 2010-12-16 11:21:10 -0800 | [diff] [blame] | 419 | /* Start the xHCI host controller running only after the USB 2.0 roothub |
| 420 | * is setup. |
| 421 | */ |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 422 | |
Sarah Sharp | 0f2a793 | 2009-04-27 19:57:12 -0700 | [diff] [blame] | 423 | hcd->uses_new_polling = 1; |
Sarah Sharp | f6ff0ac | 2010-12-16 11:21:10 -0800 | [diff] [blame] | 424 | if (!usb_hcd_is_primary_hcd(hcd)) |
| 425 | return xhci_run_finished(xhci); |
Sarah Sharp | 0f2a793 | 2009-04-27 19:57:12 -0700 | [diff] [blame] | 426 | |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 427 | xhci_dbg(xhci, "xhci_run\n"); |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 428 | /* unregister the legacy interrupt */ |
| 429 | if (hcd->irq) |
| 430 | free_irq(hcd->irq, hcd); |
| 431 | hcd->irq = -1; |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 432 | |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 433 | ret = xhci_setup_msix(xhci); |
| 434 | if (ret) |
| 435 | /* fall back to msi*/ |
| 436 | ret = xhci_setup_msi(xhci); |
| 437 | |
| 438 | if (ret) { |
| 439 | /* fall back to legacy interrupt*/ |
| 440 | ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, |
| 441 | hcd->irq_descr, hcd); |
| 442 | if (ret) { |
| 443 | xhci_err(xhci, "request interrupt %d failed\n", |
| 444 | pdev->irq); |
| 445 | return ret; |
| 446 | } |
| 447 | hcd->irq = pdev->irq; |
| 448 | } |
| 449 | |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 450 | #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING |
| 451 | init_timer(&xhci->event_ring_timer); |
| 452 | xhci->event_ring_timer.data = (unsigned long) xhci; |
Sarah Sharp | 23e3be1 | 2009-04-29 19:05:20 -0700 | [diff] [blame] | 453 | xhci->event_ring_timer.function = xhci_event_ring_work; |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 454 | /* Poll the event ring */ |
| 455 | xhci->event_ring_timer.expires = jiffies + POLL_TIMEOUT * HZ; |
| 456 | xhci->zombie = 0; |
| 457 | xhci_dbg(xhci, "Setting event ring polling timer\n"); |
| 458 | add_timer(&xhci->event_ring_timer); |
| 459 | #endif |
| 460 | |
Sarah Sharp | 66e49d8 | 2009-07-27 12:03:46 -0700 | [diff] [blame] | 461 | xhci_dbg(xhci, "Command ring memory map follows:\n"); |
| 462 | xhci_debug_ring(xhci, xhci->cmd_ring); |
| 463 | xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); |
| 464 | xhci_dbg_cmd_ptrs(xhci); |
| 465 | |
| 466 | xhci_dbg(xhci, "ERST memory map follows:\n"); |
| 467 | xhci_dbg_erst(xhci, &xhci->erst); |
| 468 | xhci_dbg(xhci, "Event ring:\n"); |
| 469 | xhci_debug_ring(xhci, xhci->event_ring); |
| 470 | xhci_dbg_ring_ptrs(xhci, xhci->event_ring); |
| 471 | temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); |
| 472 | temp_64 &= ~ERST_PTR_MASK; |
| 473 | xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64); |
| 474 | |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 475 | xhci_dbg(xhci, "// Set the interrupt modulation register\n"); |
| 476 | temp = xhci_readl(xhci, &xhci->ir_set->irq_control); |
Sarah Sharp | a4d8830 | 2009-05-14 11:44:26 -0700 | [diff] [blame] | 477 | temp &= ~ER_IRQ_INTERVAL_MASK; |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 478 | temp |= (u32) 160; |
| 479 | xhci_writel(xhci, temp, &xhci->ir_set->irq_control); |
| 480 | |
| 481 | /* Set the HCD state before we enable the irqs */ |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 482 | temp = xhci_readl(xhci, &xhci->op_regs->command); |
| 483 | temp |= (CMD_EIE); |
| 484 | xhci_dbg(xhci, "// Enable interrupts, cmd = 0x%x.\n", |
| 485 | temp); |
| 486 | xhci_writel(xhci, temp, &xhci->op_regs->command); |
| 487 | |
| 488 | temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); |
Greg Kroah-Hartman | 700e205 | 2009-04-29 19:14:08 -0700 | [diff] [blame] | 489 | xhci_dbg(xhci, "// Enabling event ring interrupter %p by writing 0x%x to irq_pending\n", |
| 490 | xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp)); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 491 | xhci_writel(xhci, ER_IRQ_ENABLE(temp), |
| 492 | &xhci->ir_set->irq_pending); |
Dmitry Torokhov | 09ece30 | 2011-02-08 16:29:33 -0800 | [diff] [blame] | 493 | xhci_print_ir_set(xhci, 0); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 494 | |
Sarah Sharp | 0238634 | 2010-05-24 13:25:28 -0700 | [diff] [blame] | 495 | if (xhci->quirks & XHCI_NEC_HOST) |
| 496 | xhci_queue_vendor_command(xhci, 0, 0, 0, |
| 497 | TRB_TYPE(TRB_NEC_GET_FW)); |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 498 | |
Sarah Sharp | f6ff0ac | 2010-12-16 11:21:10 -0800 | [diff] [blame] | 499 | xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n"); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 500 | return 0; |
| 501 | } |
| 502 | |
Sarah Sharp | f6ff0ac | 2010-12-16 11:21:10 -0800 | [diff] [blame] | 503 | static void xhci_only_stop_hcd(struct usb_hcd *hcd) |
| 504 | { |
| 505 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 506 | |
| 507 | spin_lock_irq(&xhci->lock); |
| 508 | xhci_halt(xhci); |
| 509 | |
| 510 | /* The shared_hcd is going to be deallocated shortly (the USB core only |
| 511 | * calls this function when allocation fails in usb_add_hcd(), or |
| 512 | * usb_remove_hcd() is called). So we need to unset xHCI's pointer. |
| 513 | */ |
| 514 | xhci->shared_hcd = NULL; |
| 515 | spin_unlock_irq(&xhci->lock); |
| 516 | } |
| 517 | |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 518 | /* |
| 519 | * Stop xHCI driver. |
| 520 | * |
| 521 | * This function is called by the USB core when the HC driver is removed. |
| 522 | * Its opposite is xhci_run(). |
| 523 | * |
| 524 | * Disable device contexts, disable IRQs, and quiesce the HC. |
| 525 | * Reset the HC, finish any completed transactions, and cleanup memory. |
| 526 | */ |
| 527 | void xhci_stop(struct usb_hcd *hcd) |
| 528 | { |
| 529 | u32 temp; |
| 530 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 531 | |
Sarah Sharp | f6ff0ac | 2010-12-16 11:21:10 -0800 | [diff] [blame] | 532 | if (!usb_hcd_is_primary_hcd(hcd)) { |
| 533 | xhci_only_stop_hcd(xhci->shared_hcd); |
| 534 | return; |
| 535 | } |
| 536 | |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 537 | spin_lock_irq(&xhci->lock); |
Sarah Sharp | f6ff0ac | 2010-12-16 11:21:10 -0800 | [diff] [blame] | 538 | /* Make sure the xHC is halted for a USB3 roothub |
| 539 | * (xhci_stop() could be called as part of failed init). |
| 540 | */ |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 541 | xhci_halt(xhci); |
| 542 | xhci_reset(xhci); |
| 543 | spin_unlock_irq(&xhci->lock); |
| 544 | |
Zhang Rui | 40a9fb1 | 2010-12-17 13:17:04 -0800 | [diff] [blame] | 545 | xhci_cleanup_msix(xhci); |
| 546 | |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 547 | #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING |
| 548 | /* Tell the event ring poll function not to reschedule */ |
| 549 | xhci->zombie = 1; |
| 550 | del_timer_sync(&xhci->event_ring_timer); |
| 551 | #endif |
| 552 | |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 553 | xhci_dbg(xhci, "// Disabling event ring interrupts\n"); |
| 554 | temp = xhci_readl(xhci, &xhci->op_regs->status); |
| 555 | xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status); |
| 556 | temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); |
| 557 | xhci_writel(xhci, ER_IRQ_DISABLE(temp), |
| 558 | &xhci->ir_set->irq_pending); |
Dmitry Torokhov | 09ece30 | 2011-02-08 16:29:33 -0800 | [diff] [blame] | 559 | xhci_print_ir_set(xhci, 0); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 560 | |
| 561 | xhci_dbg(xhci, "cleaning up memory\n"); |
| 562 | xhci_mem_cleanup(xhci); |
| 563 | xhci_dbg(xhci, "xhci_stop completed - status = %x\n", |
| 564 | xhci_readl(xhci, &xhci->op_regs->status)); |
| 565 | } |
| 566 | |
| 567 | /* |
| 568 | * Shutdown HC (not bus-specific) |
| 569 | * |
| 570 | * This is called when the machine is rebooting or halting. We assume that the |
| 571 | * machine will be powered off, and the HC's internal state will be reset. |
| 572 | * Don't bother to free memory. |
Sarah Sharp | f6ff0ac | 2010-12-16 11:21:10 -0800 | [diff] [blame] | 573 | * |
| 574 | * This will only ever be called with the main usb_hcd (the USB3 roothub). |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 575 | */ |
| 576 | void xhci_shutdown(struct usb_hcd *hcd) |
| 577 | { |
| 578 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 579 | |
| 580 | spin_lock_irq(&xhci->lock); |
| 581 | xhci_halt(xhci); |
Dong Nguyen | 43b86af | 2010-07-21 16:56:08 -0700 | [diff] [blame] | 582 | spin_unlock_irq(&xhci->lock); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 583 | |
Zhang Rui | 40a9fb1 | 2010-12-17 13:17:04 -0800 | [diff] [blame] | 584 | xhci_cleanup_msix(xhci); |
| 585 | |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 586 | xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n", |
| 587 | xhci_readl(xhci, &xhci->op_regs->status)); |
| 588 | } |
| 589 | |
Sarah Sharp | b5b5c3a | 2010-10-15 11:24:14 -0700 | [diff] [blame] | 590 | #ifdef CONFIG_PM |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 591 | static void xhci_save_registers(struct xhci_hcd *xhci) |
| 592 | { |
| 593 | xhci->s3.command = xhci_readl(xhci, &xhci->op_regs->command); |
| 594 | xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification); |
| 595 | xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); |
| 596 | xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg); |
| 597 | xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); |
| 598 | xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control); |
| 599 | xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size); |
| 600 | xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base); |
| 601 | xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); |
| 602 | } |
| 603 | |
| 604 | static void xhci_restore_registers(struct xhci_hcd *xhci) |
| 605 | { |
| 606 | xhci_writel(xhci, xhci->s3.command, &xhci->op_regs->command); |
| 607 | xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification); |
| 608 | xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr); |
| 609 | xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg); |
| 610 | xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending); |
| 611 | xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control); |
| 612 | xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size); |
| 613 | xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); |
| 614 | } |
| 615 | |
Sarah Sharp | 8982132 | 2010-11-12 11:59:31 -0800 | [diff] [blame] | 616 | static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) |
| 617 | { |
| 618 | u64 val_64; |
| 619 | |
| 620 | /* step 2: initialize command ring buffer */ |
| 621 | val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); |
| 622 | val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | |
| 623 | (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, |
| 624 | xhci->cmd_ring->dequeue) & |
| 625 | (u64) ~CMD_RING_RSVD_BITS) | |
| 626 | xhci->cmd_ring->cycle_state; |
| 627 | xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n", |
| 628 | (long unsigned long) val_64); |
| 629 | xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); |
| 630 | } |
| 631 | |
| 632 | /* |
| 633 | * The whole command ring must be cleared to zero when we suspend the host. |
| 634 | * |
| 635 | * The host doesn't save the command ring pointer in the suspend well, so we |
| 636 | * need to re-program it on resume. Unfortunately, the pointer must be 64-byte |
| 637 | * aligned, because of the reserved bits in the command ring dequeue pointer |
| 638 | * register. Therefore, we can't just set the dequeue pointer back in the |
| 639 | * middle of the ring (TRBs are 16-byte aligned). |
| 640 | */ |
| 641 | static void xhci_clear_command_ring(struct xhci_hcd *xhci) |
| 642 | { |
| 643 | struct xhci_ring *ring; |
| 644 | struct xhci_segment *seg; |
| 645 | |
| 646 | ring = xhci->cmd_ring; |
| 647 | seg = ring->deq_seg; |
| 648 | do { |
| 649 | memset(seg->trbs, 0, SEGMENT_SIZE); |
| 650 | seg = seg->next; |
| 651 | } while (seg != ring->deq_seg); |
| 652 | |
| 653 | /* Reset the software enqueue and dequeue pointers */ |
| 654 | ring->deq_seg = ring->first_seg; |
| 655 | ring->dequeue = ring->first_seg->trbs; |
| 656 | ring->enq_seg = ring->deq_seg; |
| 657 | ring->enqueue = ring->dequeue; |
| 658 | |
| 659 | /* |
| 660 | * Ring is now zeroed, so the HW should look for change of ownership |
| 661 | * when the cycle bit is set to 1. |
| 662 | */ |
| 663 | ring->cycle_state = 1; |
| 664 | |
| 665 | /* |
| 666 | * Reset the hardware dequeue pointer. |
| 667 | * Yes, this will need to be re-written after resume, but we're paranoid |
| 668 | * and want to make sure the hardware doesn't access bogus memory |
| 669 | * because, say, the BIOS or an SMI started the host without changing |
| 670 | * the command ring pointers. |
| 671 | */ |
| 672 | xhci_set_cmd_ring_deq(xhci); |
| 673 | } |
| 674 | |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 675 | /* |
| 676 | * Stop HC (not bus-specific) |
| 677 | * |
| 678 | * This is called when the machine transition into S3/S4 mode. |
| 679 | * |
| 680 | */ |
| 681 | int xhci_suspend(struct xhci_hcd *xhci) |
| 682 | { |
| 683 | int rc = 0; |
| 684 | struct usb_hcd *hcd = xhci_to_hcd(xhci); |
| 685 | u32 command; |
Andiry Xu | 0029227 | 2010-12-27 17:39:02 +0800 | [diff] [blame] | 686 | int i; |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 687 | |
| 688 | spin_lock_irq(&xhci->lock); |
| 689 | clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
Sarah Sharp | b320937 | 2011-03-07 11:24:07 -0800 | [diff] [blame] | 690 | clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 691 | /* step 1: stop endpoint */ |
| 692 | /* skipped assuming that port suspend has done */ |
| 693 | |
| 694 | /* step 2: clear Run/Stop bit */ |
| 695 | command = xhci_readl(xhci, &xhci->op_regs->command); |
| 696 | command &= ~CMD_RUN; |
| 697 | xhci_writel(xhci, command, &xhci->op_regs->command); |
| 698 | if (handshake(xhci, &xhci->op_regs->status, |
| 699 | STS_HALT, STS_HALT, 100*100)) { |
| 700 | xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n"); |
| 701 | spin_unlock_irq(&xhci->lock); |
| 702 | return -ETIMEDOUT; |
| 703 | } |
Sarah Sharp | 8982132 | 2010-11-12 11:59:31 -0800 | [diff] [blame] | 704 | xhci_clear_command_ring(xhci); |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 705 | |
| 706 | /* step 3: save registers */ |
| 707 | xhci_save_registers(xhci); |
| 708 | |
| 709 | /* step 4: set CSS flag */ |
| 710 | command = xhci_readl(xhci, &xhci->op_regs->command); |
| 711 | command |= CMD_CSS; |
| 712 | xhci_writel(xhci, command, &xhci->op_regs->command); |
| 713 | if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) { |
| 714 | xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n"); |
| 715 | spin_unlock_irq(&xhci->lock); |
| 716 | return -ETIMEDOUT; |
| 717 | } |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 718 | spin_unlock_irq(&xhci->lock); |
| 719 | |
Andiry Xu | 0029227 | 2010-12-27 17:39:02 +0800 | [diff] [blame] | 720 | /* step 5: remove core well power */ |
| 721 | /* synchronize irq when using MSI-X */ |
| 722 | if (xhci->msix_entries) { |
| 723 | for (i = 0; i < xhci->msix_count; i++) |
| 724 | synchronize_irq(xhci->msix_entries[i].vector); |
| 725 | } |
| 726 | |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 727 | return rc; |
| 728 | } |
| 729 | |
| 730 | /* |
| 731 | * start xHC (not bus-specific) |
| 732 | * |
| 733 | * This is called when the machine transition from S3/S4 mode. |
| 734 | * |
| 735 | */ |
| 736 | int xhci_resume(struct xhci_hcd *xhci, bool hibernated) |
| 737 | { |
| 738 | u32 command, temp = 0; |
| 739 | struct usb_hcd *hcd = xhci_to_hcd(xhci); |
Sarah Sharp | 65b22f9 | 2010-12-17 12:35:05 -0800 | [diff] [blame] | 740 | struct usb_hcd *secondary_hcd; |
Andiry Xu | 019a35f | 2011-01-06 15:43:17 +0800 | [diff] [blame] | 741 | int retval; |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 742 | |
Sarah Sharp | f6ff0ac | 2010-12-16 11:21:10 -0800 | [diff] [blame] | 743 | /* Wait a bit if either of the roothubs need to settle from the |
Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame] | 744 | * transition into bus suspend. |
Sarah Sharp | 20b67cf | 2010-12-15 12:47:14 -0800 | [diff] [blame] | 745 | */ |
Sarah Sharp | f6ff0ac | 2010-12-16 11:21:10 -0800 | [diff] [blame] | 746 | if (time_before(jiffies, xhci->bus_state[0].next_statechange) || |
| 747 | time_before(jiffies, |
| 748 | xhci->bus_state[1].next_statechange)) |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 749 | msleep(100); |
| 750 | |
| 751 | spin_lock_irq(&xhci->lock); |
| 752 | |
| 753 | if (!hibernated) { |
| 754 | /* step 1: restore register */ |
| 755 | xhci_restore_registers(xhci); |
| 756 | /* step 2: initialize command ring buffer */ |
Sarah Sharp | 8982132 | 2010-11-12 11:59:31 -0800 | [diff] [blame] | 757 | xhci_set_cmd_ring_deq(xhci); |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 758 | /* step 3: restore state and start state*/ |
| 759 | /* step 3: set CRS flag */ |
| 760 | command = xhci_readl(xhci, &xhci->op_regs->command); |
| 761 | command |= CMD_CRS; |
| 762 | xhci_writel(xhci, command, &xhci->op_regs->command); |
| 763 | if (handshake(xhci, &xhci->op_regs->status, |
| 764 | STS_RESTORE, 0, 10*100)) { |
| 765 | xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n"); |
| 766 | spin_unlock_irq(&xhci->lock); |
| 767 | return -ETIMEDOUT; |
| 768 | } |
| 769 | temp = xhci_readl(xhci, &xhci->op_regs->status); |
| 770 | } |
| 771 | |
| 772 | /* If restore operation fails, re-initialize the HC during resume */ |
| 773 | if ((temp & STS_SRE) || hibernated) { |
| 774 | usb_root_hub_lost_power(hcd->self.root_hub); |
| 775 | |
| 776 | xhci_dbg(xhci, "Stop HCD\n"); |
| 777 | xhci_halt(xhci); |
| 778 | xhci_reset(xhci); |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 779 | spin_unlock_irq(&xhci->lock); |
Andiry Xu | 0029227 | 2010-12-27 17:39:02 +0800 | [diff] [blame] | 780 | xhci_cleanup_msix(xhci); |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 781 | |
| 782 | #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING |
| 783 | /* Tell the event ring poll function not to reschedule */ |
| 784 | xhci->zombie = 1; |
| 785 | del_timer_sync(&xhci->event_ring_timer); |
| 786 | #endif |
| 787 | |
| 788 | xhci_dbg(xhci, "// Disabling event ring interrupts\n"); |
| 789 | temp = xhci_readl(xhci, &xhci->op_regs->status); |
| 790 | xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status); |
| 791 | temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); |
| 792 | xhci_writel(xhci, ER_IRQ_DISABLE(temp), |
| 793 | &xhci->ir_set->irq_pending); |
Dmitry Torokhov | 09ece30 | 2011-02-08 16:29:33 -0800 | [diff] [blame] | 794 | xhci_print_ir_set(xhci, 0); |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 795 | |
| 796 | xhci_dbg(xhci, "cleaning up memory\n"); |
| 797 | xhci_mem_cleanup(xhci); |
| 798 | xhci_dbg(xhci, "xhci_stop completed - status = %x\n", |
| 799 | xhci_readl(xhci, &xhci->op_regs->status)); |
| 800 | |
Sarah Sharp | 65b22f9 | 2010-12-17 12:35:05 -0800 | [diff] [blame] | 801 | /* USB core calls the PCI reinit and start functions twice: |
| 802 | * first with the primary HCD, and then with the secondary HCD. |
| 803 | * If we don't do the same, the host will never be started. |
| 804 | */ |
| 805 | if (!usb_hcd_is_primary_hcd(hcd)) |
| 806 | secondary_hcd = hcd; |
| 807 | else |
| 808 | secondary_hcd = xhci->shared_hcd; |
| 809 | |
| 810 | xhci_dbg(xhci, "Initialize the xhci_hcd\n"); |
| 811 | retval = xhci_init(hcd->primary_hcd); |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 812 | if (retval) |
| 813 | return retval; |
Sarah Sharp | 65b22f9 | 2010-12-17 12:35:05 -0800 | [diff] [blame] | 814 | xhci_dbg(xhci, "Start the primary HCD\n"); |
| 815 | retval = xhci_run(hcd->primary_hcd); |
| 816 | if (retval) |
| 817 | goto failed_restart; |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 818 | |
Sarah Sharp | 65b22f9 | 2010-12-17 12:35:05 -0800 | [diff] [blame] | 819 | xhci_dbg(xhci, "Start the secondary HCD\n"); |
| 820 | retval = xhci_run(secondary_hcd); |
Sarah Sharp | b320937 | 2011-03-07 11:24:07 -0800 | [diff] [blame] | 821 | if (!retval) { |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 822 | set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
Sarah Sharp | b320937 | 2011-03-07 11:24:07 -0800 | [diff] [blame] | 823 | set_bit(HCD_FLAG_HW_ACCESSIBLE, |
| 824 | &xhci->shared_hcd->flags); |
| 825 | } |
Sarah Sharp | 65b22f9 | 2010-12-17 12:35:05 -0800 | [diff] [blame] | 826 | failed_restart: |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 827 | hcd->state = HC_STATE_SUSPENDED; |
Sarah Sharp | b320937 | 2011-03-07 11:24:07 -0800 | [diff] [blame] | 828 | xhci->shared_hcd->state = HC_STATE_SUSPENDED; |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 829 | return retval; |
| 830 | } |
| 831 | |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 832 | /* step 4: set Run/Stop bit */ |
| 833 | command = xhci_readl(xhci, &xhci->op_regs->command); |
| 834 | command |= CMD_RUN; |
| 835 | xhci_writel(xhci, command, &xhci->op_regs->command); |
| 836 | handshake(xhci, &xhci->op_regs->status, STS_HALT, |
| 837 | 0, 250 * 1000); |
| 838 | |
| 839 | /* step 5: walk topology and initialize portsc, |
| 840 | * portpmsc and portli |
| 841 | */ |
| 842 | /* this is done in bus_resume */ |
| 843 | |
| 844 | /* step 6: restart each of the previously |
| 845 | * Running endpoints by ringing their doorbells |
| 846 | */ |
| 847 | |
| 848 | set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
Sarah Sharp | b320937 | 2011-03-07 11:24:07 -0800 | [diff] [blame] | 849 | set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); |
Andiry Xu | 5535b1d | 2010-10-14 07:23:06 -0700 | [diff] [blame] | 850 | |
| 851 | spin_unlock_irq(&xhci->lock); |
| 852 | return 0; |
| 853 | } |
Sarah Sharp | b5b5c3a | 2010-10-15 11:24:14 -0700 | [diff] [blame] | 854 | #endif /* CONFIG_PM */ |
| 855 | |
Sarah Sharp | 7f84eef | 2009-04-27 19:53:56 -0700 | [diff] [blame] | 856 | /*-------------------------------------------------------------------------*/ |
| 857 | |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 858 | /** |
| 859 | * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and |
| 860 | * HCDs. Find the index for an endpoint given its descriptor. Use the return |
| 861 | * value to right shift 1 for the bitmask. |
| 862 | * |
| 863 | * Index = (epnum * 2) + direction - 1, |
| 864 | * where direction = 0 for OUT, 1 for IN. |
| 865 | * For control endpoints, the IN index is used (OUT index is unused), so |
| 866 | * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2) |
| 867 | */ |
| 868 | unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc) |
| 869 | { |
| 870 | unsigned int index; |
| 871 | if (usb_endpoint_xfer_control(desc)) |
| 872 | index = (unsigned int) (usb_endpoint_num(desc)*2); |
| 873 | else |
| 874 | index = (unsigned int) (usb_endpoint_num(desc)*2) + |
| 875 | (usb_endpoint_dir_in(desc) ? 1 : 0) - 1; |
| 876 | return index; |
| 877 | } |
| 878 | |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 879 | /* Find the flag for this endpoint (for use in the control context). Use the |
| 880 | * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is |
| 881 | * bit 1, etc. |
| 882 | */ |
| 883 | unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc) |
| 884 | { |
| 885 | return 1 << (xhci_get_endpoint_index(desc) + 1); |
| 886 | } |
| 887 | |
Sarah Sharp | ac9d8fe | 2009-08-07 14:04:55 -0700 | [diff] [blame] | 888 | /* Find the flag for this endpoint (for use in the control context). Use the |
| 889 | * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is |
| 890 | * bit 1, etc. |
| 891 | */ |
| 892 | unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index) |
| 893 | { |
| 894 | return 1 << (ep_index + 1); |
| 895 | } |
| 896 | |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 897 | /* Compute the last valid endpoint context index. Basically, this is the |
| 898 | * endpoint index plus one. For slot contexts with more than valid endpoint, |
| 899 | * we find the most significant bit set in the added contexts flags. |
| 900 | * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000 |
| 901 | * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one. |
| 902 | */ |
Sarah Sharp | ac9d8fe | 2009-08-07 14:04:55 -0700 | [diff] [blame] | 903 | unsigned int xhci_last_valid_endpoint(u32 added_ctxs) |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 904 | { |
| 905 | return fls(added_ctxs) - 1; |
| 906 | } |
| 907 | |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 908 | /* Returns 1 if the arguments are OK; |
| 909 | * returns 0 this is a root hub; returns -EINVAL for NULL pointers. |
| 910 | */ |
Dmitry Torokhov | 8212a49 | 2011-02-08 13:55:59 -0800 | [diff] [blame] | 911 | static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, |
Andiry Xu | 6492773 | 2010-10-14 07:22:45 -0700 | [diff] [blame] | 912 | struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev, |
| 913 | const char *func) { |
| 914 | struct xhci_hcd *xhci; |
| 915 | struct xhci_virt_device *virt_dev; |
| 916 | |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 917 | if (!hcd || (check_ep && !ep) || !udev) { |
| 918 | printk(KERN_DEBUG "xHCI %s called with invalid args\n", |
| 919 | func); |
| 920 | return -EINVAL; |
| 921 | } |
| 922 | if (!udev->parent) { |
| 923 | printk(KERN_DEBUG "xHCI %s called for root hub\n", |
| 924 | func); |
| 925 | return 0; |
| 926 | } |
Andiry Xu | 6492773 | 2010-10-14 07:22:45 -0700 | [diff] [blame] | 927 | |
| 928 | if (check_virt_dev) { |
| 929 | xhci = hcd_to_xhci(hcd); |
| 930 | if (!udev->slot_id || !xhci->devs |
| 931 | || !xhci->devs[udev->slot_id]) { |
| 932 | printk(KERN_DEBUG "xHCI %s called with unaddressed " |
| 933 | "device\n", func); |
| 934 | return -EINVAL; |
| 935 | } |
| 936 | |
| 937 | virt_dev = xhci->devs[udev->slot_id]; |
| 938 | if (virt_dev->udev != udev) { |
| 939 | printk(KERN_DEBUG "xHCI %s called with udev and " |
| 940 | "virt_dev does not match\n", func); |
| 941 | return -EINVAL; |
| 942 | } |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 943 | } |
Andiry Xu | 6492773 | 2010-10-14 07:22:45 -0700 | [diff] [blame] | 944 | |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 945 | return 1; |
| 946 | } |
| 947 | |
Sarah Sharp | 2d3f1fa | 2009-08-07 14:04:49 -0700 | [diff] [blame] | 948 | static int xhci_configure_endpoint(struct xhci_hcd *xhci, |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 949 | struct usb_device *udev, struct xhci_command *command, |
| 950 | bool ctx_change, bool must_succeed); |
Sarah Sharp | 2d3f1fa | 2009-08-07 14:04:49 -0700 | [diff] [blame] | 951 | |
| 952 | /* |
| 953 | * Full speed devices may have a max packet size greater than 8 bytes, but the |
| 954 | * USB core doesn't know that until it reads the first 8 bytes of the |
| 955 | * descriptor. If the usb_device's max packet size changes after that point, |
| 956 | * we need to issue an evaluate context command and wait on it. |
| 957 | */ |
| 958 | static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, |
| 959 | unsigned int ep_index, struct urb *urb) |
| 960 | { |
| 961 | struct xhci_container_ctx *in_ctx; |
| 962 | struct xhci_container_ctx *out_ctx; |
| 963 | struct xhci_input_control_ctx *ctrl_ctx; |
| 964 | struct xhci_ep_ctx *ep_ctx; |
| 965 | int max_packet_size; |
| 966 | int hw_max_packet_size; |
| 967 | int ret = 0; |
| 968 | |
| 969 | out_ctx = xhci->devs[slot_id]->out_ctx; |
| 970 | ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); |
| 971 | hw_max_packet_size = MAX_PACKET_DECODED(ep_ctx->ep_info2); |
| 972 | max_packet_size = urb->dev->ep0.desc.wMaxPacketSize; |
| 973 | if (hw_max_packet_size != max_packet_size) { |
| 974 | xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n"); |
| 975 | xhci_dbg(xhci, "Max packet size in usb_device = %d\n", |
| 976 | max_packet_size); |
| 977 | xhci_dbg(xhci, "Max packet size in xHCI HW = %d\n", |
| 978 | hw_max_packet_size); |
| 979 | xhci_dbg(xhci, "Issuing evaluate context command.\n"); |
| 980 | |
| 981 | /* Set up the modified control endpoint 0 */ |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 982 | xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx, |
| 983 | xhci->devs[slot_id]->out_ctx, ep_index); |
Sarah Sharp | 2d3f1fa | 2009-08-07 14:04:49 -0700 | [diff] [blame] | 984 | in_ctx = xhci->devs[slot_id]->in_ctx; |
| 985 | ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); |
| 986 | ep_ctx->ep_info2 &= ~MAX_PACKET_MASK; |
| 987 | ep_ctx->ep_info2 |= MAX_PACKET(max_packet_size); |
| 988 | |
| 989 | /* Set up the input context flags for the command */ |
| 990 | /* FIXME: This won't work if a non-default control endpoint |
| 991 | * changes max packet sizes. |
| 992 | */ |
| 993 | ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); |
| 994 | ctrl_ctx->add_flags = EP0_FLAG; |
| 995 | ctrl_ctx->drop_flags = 0; |
| 996 | |
| 997 | xhci_dbg(xhci, "Slot %d input context\n", slot_id); |
| 998 | xhci_dbg_ctx(xhci, in_ctx, ep_index); |
| 999 | xhci_dbg(xhci, "Slot %d output context\n", slot_id); |
| 1000 | xhci_dbg_ctx(xhci, out_ctx, ep_index); |
| 1001 | |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1002 | ret = xhci_configure_endpoint(xhci, urb->dev, NULL, |
| 1003 | true, false); |
Sarah Sharp | 2d3f1fa | 2009-08-07 14:04:49 -0700 | [diff] [blame] | 1004 | |
| 1005 | /* Clean up the input context for later use by bandwidth |
| 1006 | * functions. |
| 1007 | */ |
| 1008 | ctrl_ctx->add_flags = SLOT_FLAG; |
| 1009 | } |
| 1010 | return ret; |
| 1011 | } |
| 1012 | |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 1013 | /* |
| 1014 | * non-error returns are a promise to giveback() the urb later |
| 1015 | * we drop ownership so next owner (or urb unlink) can get it |
| 1016 | */ |
| 1017 | int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) |
| 1018 | { |
| 1019 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 1020 | unsigned long flags; |
| 1021 | int ret = 0; |
| 1022 | unsigned int slot_id, ep_index; |
Andiry Xu | 8e51adc | 2010-07-22 15:23:31 -0700 | [diff] [blame] | 1023 | struct urb_priv *urb_priv; |
| 1024 | int size, i; |
Sarah Sharp | 2d3f1fa | 2009-08-07 14:04:49 -0700 | [diff] [blame] | 1025 | |
Andiry Xu | 6492773 | 2010-10-14 07:22:45 -0700 | [diff] [blame] | 1026 | if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, |
| 1027 | true, true, __func__) <= 0) |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 1028 | return -EINVAL; |
| 1029 | |
| 1030 | slot_id = urb->dev->slot_id; |
| 1031 | ep_index = xhci_get_endpoint_index(&urb->ep->desc); |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 1032 | |
Alan Stern | 541c7d4 | 2010-06-22 16:39:10 -0400 | [diff] [blame] | 1033 | if (!HCD_HW_ACCESSIBLE(hcd)) { |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 1034 | if (!in_interrupt()) |
| 1035 | xhci_dbg(xhci, "urb submitted during PCI suspend\n"); |
| 1036 | ret = -ESHUTDOWN; |
| 1037 | goto exit; |
| 1038 | } |
Andiry Xu | 8e51adc | 2010-07-22 15:23:31 -0700 | [diff] [blame] | 1039 | |
| 1040 | if (usb_endpoint_xfer_isoc(&urb->ep->desc)) |
| 1041 | size = urb->number_of_packets; |
| 1042 | else |
| 1043 | size = 1; |
| 1044 | |
| 1045 | urb_priv = kzalloc(sizeof(struct urb_priv) + |
| 1046 | size * sizeof(struct xhci_td *), mem_flags); |
| 1047 | if (!urb_priv) |
| 1048 | return -ENOMEM; |
| 1049 | |
| 1050 | for (i = 0; i < size; i++) { |
| 1051 | urb_priv->td[i] = kzalloc(sizeof(struct xhci_td), mem_flags); |
| 1052 | if (!urb_priv->td[i]) { |
| 1053 | urb_priv->length = i; |
| 1054 | xhci_urb_free_priv(xhci, urb_priv); |
| 1055 | return -ENOMEM; |
| 1056 | } |
| 1057 | } |
| 1058 | |
| 1059 | urb_priv->length = size; |
| 1060 | urb_priv->td_cnt = 0; |
| 1061 | urb->hcpriv = urb_priv; |
| 1062 | |
Sarah Sharp | 2d3f1fa | 2009-08-07 14:04:49 -0700 | [diff] [blame] | 1063 | if (usb_endpoint_xfer_control(&urb->ep->desc)) { |
| 1064 | /* Check to see if the max packet size for the default control |
| 1065 | * endpoint changed during FS device enumeration |
| 1066 | */ |
| 1067 | if (urb->dev->speed == USB_SPEED_FULL) { |
| 1068 | ret = xhci_check_maxpacket(xhci, slot_id, |
| 1069 | ep_index, urb); |
| 1070 | if (ret < 0) |
| 1071 | return ret; |
| 1072 | } |
| 1073 | |
Sarah Sharp | b11069f | 2009-07-27 12:03:23 -0700 | [diff] [blame] | 1074 | /* We have a spinlock and interrupts disabled, so we must pass |
| 1075 | * atomic context to this function, which may allocate memory. |
| 1076 | */ |
Sarah Sharp | 2d3f1fa | 2009-08-07 14:04:49 -0700 | [diff] [blame] | 1077 | spin_lock_irqsave(&xhci->lock, flags); |
Sarah Sharp | 6f5165c | 2009-10-27 10:57:01 -0700 | [diff] [blame] | 1078 | if (xhci->xhc_state & XHCI_STATE_DYING) |
| 1079 | goto dying; |
Sarah Sharp | b11069f | 2009-07-27 12:03:23 -0700 | [diff] [blame] | 1080 | ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb, |
Sarah Sharp | 23e3be1 | 2009-04-29 19:05:20 -0700 | [diff] [blame] | 1081 | slot_id, ep_index); |
Sarah Sharp | 2d3f1fa | 2009-08-07 14:04:49 -0700 | [diff] [blame] | 1082 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 1083 | } else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) { |
| 1084 | spin_lock_irqsave(&xhci->lock, flags); |
Sarah Sharp | 6f5165c | 2009-10-27 10:57:01 -0700 | [diff] [blame] | 1085 | if (xhci->xhc_state & XHCI_STATE_DYING) |
| 1086 | goto dying; |
Sarah Sharp | 8df75f4 | 2010-04-02 15:34:16 -0700 | [diff] [blame] | 1087 | if (xhci->devs[slot_id]->eps[ep_index].ep_state & |
| 1088 | EP_GETTING_STREAMS) { |
| 1089 | xhci_warn(xhci, "WARN: Can't enqueue URB while bulk ep " |
| 1090 | "is transitioning to using streams.\n"); |
| 1091 | ret = -EINVAL; |
| 1092 | } else if (xhci->devs[slot_id]->eps[ep_index].ep_state & |
| 1093 | EP_GETTING_NO_STREAMS) { |
| 1094 | xhci_warn(xhci, "WARN: Can't enqueue URB while bulk ep " |
| 1095 | "is transitioning to " |
| 1096 | "not having streams.\n"); |
| 1097 | ret = -EINVAL; |
| 1098 | } else { |
| 1099 | ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, |
| 1100 | slot_id, ep_index); |
| 1101 | } |
Sarah Sharp | 2d3f1fa | 2009-08-07 14:04:49 -0700 | [diff] [blame] | 1102 | spin_unlock_irqrestore(&xhci->lock, flags); |
Sarah Sharp | 624defa | 2009-09-02 12:14:28 -0700 | [diff] [blame] | 1103 | } else if (usb_endpoint_xfer_int(&urb->ep->desc)) { |
| 1104 | spin_lock_irqsave(&xhci->lock, flags); |
Sarah Sharp | 6f5165c | 2009-10-27 10:57:01 -0700 | [diff] [blame] | 1105 | if (xhci->xhc_state & XHCI_STATE_DYING) |
| 1106 | goto dying; |
Sarah Sharp | 624defa | 2009-09-02 12:14:28 -0700 | [diff] [blame] | 1107 | ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb, |
| 1108 | slot_id, ep_index); |
| 1109 | spin_unlock_irqrestore(&xhci->lock, flags); |
Sarah Sharp | 2d3f1fa | 2009-08-07 14:04:49 -0700 | [diff] [blame] | 1110 | } else { |
Andiry Xu | 787f4e5 | 2010-07-22 15:23:52 -0700 | [diff] [blame] | 1111 | spin_lock_irqsave(&xhci->lock, flags); |
| 1112 | if (xhci->xhc_state & XHCI_STATE_DYING) |
| 1113 | goto dying; |
| 1114 | ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb, |
| 1115 | slot_id, ep_index); |
| 1116 | spin_unlock_irqrestore(&xhci->lock, flags); |
Sarah Sharp | 2d3f1fa | 2009-08-07 14:04:49 -0700 | [diff] [blame] | 1117 | } |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 1118 | exit: |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 1119 | return ret; |
Sarah Sharp | 6f5165c | 2009-10-27 10:57:01 -0700 | [diff] [blame] | 1120 | dying: |
Andiry Xu | 8e51adc | 2010-07-22 15:23:31 -0700 | [diff] [blame] | 1121 | xhci_urb_free_priv(xhci, urb_priv); |
| 1122 | urb->hcpriv = NULL; |
Sarah Sharp | 6f5165c | 2009-10-27 10:57:01 -0700 | [diff] [blame] | 1123 | xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for " |
| 1124 | "non-responsive xHCI host.\n", |
| 1125 | urb->ep->desc.bEndpointAddress, urb); |
| 1126 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 1127 | return -ESHUTDOWN; |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 1128 | } |
| 1129 | |
Sarah Sharp | 021bff9 | 2010-07-29 22:12:20 -0700 | [diff] [blame] | 1130 | /* Get the right ring for the given URB. |
| 1131 | * If the endpoint supports streams, boundary check the URB's stream ID. |
| 1132 | * If the endpoint doesn't support streams, return the singular endpoint ring. |
| 1133 | */ |
| 1134 | static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, |
| 1135 | struct urb *urb) |
| 1136 | { |
| 1137 | unsigned int slot_id; |
| 1138 | unsigned int ep_index; |
| 1139 | unsigned int stream_id; |
| 1140 | struct xhci_virt_ep *ep; |
| 1141 | |
| 1142 | slot_id = urb->dev->slot_id; |
| 1143 | ep_index = xhci_get_endpoint_index(&urb->ep->desc); |
| 1144 | stream_id = urb->stream_id; |
| 1145 | ep = &xhci->devs[slot_id]->eps[ep_index]; |
| 1146 | /* Common case: no streams */ |
| 1147 | if (!(ep->ep_state & EP_HAS_STREAMS)) |
| 1148 | return ep->ring; |
| 1149 | |
| 1150 | if (stream_id == 0) { |
| 1151 | xhci_warn(xhci, |
| 1152 | "WARN: Slot ID %u, ep index %u has streams, " |
| 1153 | "but URB has no stream ID.\n", |
| 1154 | slot_id, ep_index); |
| 1155 | return NULL; |
| 1156 | } |
| 1157 | |
| 1158 | if (stream_id < ep->stream_info->num_streams) |
| 1159 | return ep->stream_info->stream_rings[stream_id]; |
| 1160 | |
| 1161 | xhci_warn(xhci, |
| 1162 | "WARN: Slot ID %u, ep index %u has " |
| 1163 | "stream IDs 1 to %u allocated, " |
| 1164 | "but stream ID %u is requested.\n", |
| 1165 | slot_id, ep_index, |
| 1166 | ep->stream_info->num_streams - 1, |
| 1167 | stream_id); |
| 1168 | return NULL; |
| 1169 | } |
| 1170 | |
Sarah Sharp | ae63674 | 2009-04-29 19:02:31 -0700 | [diff] [blame] | 1171 | /* |
| 1172 | * Remove the URB's TD from the endpoint ring. This may cause the HC to stop |
| 1173 | * USB transfers, potentially stopping in the middle of a TRB buffer. The HC |
| 1174 | * should pick up where it left off in the TD, unless a Set Transfer Ring |
| 1175 | * Dequeue Pointer is issued. |
| 1176 | * |
| 1177 | * The TRBs that make up the buffers for the canceled URB will be "removed" from |
| 1178 | * the ring. Since the ring is a contiguous structure, they can't be physically |
| 1179 | * removed. Instead, there are two options: |
| 1180 | * |
| 1181 | * 1) If the HC is in the middle of processing the URB to be canceled, we |
| 1182 | * simply move the ring's dequeue pointer past those TRBs using the Set |
| 1183 | * Transfer Ring Dequeue Pointer command. This will be the common case, |
| 1184 | * when drivers timeout on the last submitted URB and attempt to cancel. |
| 1185 | * |
| 1186 | * 2) If the HC is in the middle of a different TD, we turn the TRBs into a |
| 1187 | * series of 1-TRB transfer no-op TDs. (No-ops shouldn't be chained.) The |
| 1188 | * HC will need to invalidate the any TRBs it has cached after the stop |
| 1189 | * endpoint command, as noted in the xHCI 0.95 errata. |
| 1190 | * |
| 1191 | * 3) The TD may have completed by the time the Stop Endpoint Command |
| 1192 | * completes, so software needs to handle that case too. |
| 1193 | * |
| 1194 | * This function should protect against the TD enqueueing code ringing the |
| 1195 | * doorbell while this code is waiting for a Stop Endpoint command to complete. |
| 1196 | * It also needs to account for multiple cancellations on happening at the same |
| 1197 | * time for the same endpoint. |
| 1198 | * |
| 1199 | * Note that this function can be called in any context, or so says |
| 1200 | * usb_hcd_unlink_urb() |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 1201 | */ |
| 1202 | int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) |
| 1203 | { |
Sarah Sharp | ae63674 | 2009-04-29 19:02:31 -0700 | [diff] [blame] | 1204 | unsigned long flags; |
Andiry Xu | 8e51adc | 2010-07-22 15:23:31 -0700 | [diff] [blame] | 1205 | int ret, i; |
Sarah Sharp | e34b2fb | 2009-09-28 17:21:37 -0700 | [diff] [blame] | 1206 | u32 temp; |
Sarah Sharp | ae63674 | 2009-04-29 19:02:31 -0700 | [diff] [blame] | 1207 | struct xhci_hcd *xhci; |
Andiry Xu | 8e51adc | 2010-07-22 15:23:31 -0700 | [diff] [blame] | 1208 | struct urb_priv *urb_priv; |
Sarah Sharp | ae63674 | 2009-04-29 19:02:31 -0700 | [diff] [blame] | 1209 | struct xhci_td *td; |
| 1210 | unsigned int ep_index; |
| 1211 | struct xhci_ring *ep_ring; |
Sarah Sharp | 63a0d9a | 2009-09-04 10:53:09 -0700 | [diff] [blame] | 1212 | struct xhci_virt_ep *ep; |
Sarah Sharp | ae63674 | 2009-04-29 19:02:31 -0700 | [diff] [blame] | 1213 | |
| 1214 | xhci = hcd_to_xhci(hcd); |
| 1215 | spin_lock_irqsave(&xhci->lock, flags); |
| 1216 | /* Make sure the URB hasn't completed or been unlinked already */ |
| 1217 | ret = usb_hcd_check_unlink_urb(hcd, urb, status); |
| 1218 | if (ret || !urb->hcpriv) |
| 1219 | goto done; |
Sarah Sharp | e34b2fb | 2009-09-28 17:21:37 -0700 | [diff] [blame] | 1220 | temp = xhci_readl(xhci, &xhci->op_regs->status); |
Sarah Sharp | c6cc27c | 2011-03-11 10:20:58 -0800 | [diff] [blame] | 1221 | if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) { |
Sarah Sharp | e34b2fb | 2009-09-28 17:21:37 -0700 | [diff] [blame] | 1222 | xhci_dbg(xhci, "HW died, freeing TD.\n"); |
Andiry Xu | 8e51adc | 2010-07-22 15:23:31 -0700 | [diff] [blame] | 1223 | urb_priv = urb->hcpriv; |
Sarah Sharp | e34b2fb | 2009-09-28 17:21:37 -0700 | [diff] [blame] | 1224 | |
| 1225 | usb_hcd_unlink_urb_from_ep(hcd, urb); |
| 1226 | spin_unlock_irqrestore(&xhci->lock, flags); |
Sarah Sharp | 214f76f | 2010-10-26 11:22:02 -0700 | [diff] [blame] | 1227 | usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN); |
Andiry Xu | 8e51adc | 2010-07-22 15:23:31 -0700 | [diff] [blame] | 1228 | xhci_urb_free_priv(xhci, urb_priv); |
Sarah Sharp | e34b2fb | 2009-09-28 17:21:37 -0700 | [diff] [blame] | 1229 | return ret; |
| 1230 | } |
Sarah Sharp | 6f5165c | 2009-10-27 10:57:01 -0700 | [diff] [blame] | 1231 | if (xhci->xhc_state & XHCI_STATE_DYING) { |
| 1232 | xhci_dbg(xhci, "Ep 0x%x: URB %p to be canceled on " |
| 1233 | "non-responsive xHCI host.\n", |
| 1234 | urb->ep->desc.bEndpointAddress, urb); |
| 1235 | /* Let the stop endpoint command watchdog timer (which set this |
| 1236 | * state) finish cleaning up the endpoint TD lists. We must |
| 1237 | * have caught it in the middle of dropping a lock and giving |
| 1238 | * back an URB. |
| 1239 | */ |
| 1240 | goto done; |
| 1241 | } |
Sarah Sharp | ae63674 | 2009-04-29 19:02:31 -0700 | [diff] [blame] | 1242 | |
Greg Kroah-Hartman | 700e205 | 2009-04-29 19:14:08 -0700 | [diff] [blame] | 1243 | xhci_dbg(xhci, "Cancel URB %p\n", urb); |
Sarah Sharp | 66e49d8 | 2009-07-27 12:03:46 -0700 | [diff] [blame] | 1244 | xhci_dbg(xhci, "Event ring:\n"); |
| 1245 | xhci_debug_ring(xhci, xhci->event_ring); |
Sarah Sharp | ae63674 | 2009-04-29 19:02:31 -0700 | [diff] [blame] | 1246 | ep_index = xhci_get_endpoint_index(&urb->ep->desc); |
Sarah Sharp | 63a0d9a | 2009-09-04 10:53:09 -0700 | [diff] [blame] | 1247 | ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index]; |
Sarah Sharp | e9df17e | 2010-04-02 15:34:43 -0700 | [diff] [blame] | 1248 | ep_ring = xhci_urb_to_transfer_ring(xhci, urb); |
| 1249 | if (!ep_ring) { |
| 1250 | ret = -EINVAL; |
| 1251 | goto done; |
| 1252 | } |
| 1253 | |
Sarah Sharp | 66e49d8 | 2009-07-27 12:03:46 -0700 | [diff] [blame] | 1254 | xhci_dbg(xhci, "Endpoint ring:\n"); |
| 1255 | xhci_debug_ring(xhci, ep_ring); |
Sarah Sharp | ae63674 | 2009-04-29 19:02:31 -0700 | [diff] [blame] | 1256 | |
Andiry Xu | 8e51adc | 2010-07-22 15:23:31 -0700 | [diff] [blame] | 1257 | urb_priv = urb->hcpriv; |
| 1258 | |
| 1259 | for (i = urb_priv->td_cnt; i < urb_priv->length; i++) { |
| 1260 | td = urb_priv->td[i]; |
| 1261 | list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list); |
| 1262 | } |
| 1263 | |
Sarah Sharp | ae63674 | 2009-04-29 19:02:31 -0700 | [diff] [blame] | 1264 | /* Queue a stop endpoint command, but only if this is |
| 1265 | * the first cancellation to be handled. |
| 1266 | */ |
Sarah Sharp | 678539c | 2009-10-27 10:55:52 -0700 | [diff] [blame] | 1267 | if (!(ep->ep_state & EP_HALT_PENDING)) { |
| 1268 | ep->ep_state |= EP_HALT_PENDING; |
Sarah Sharp | 6f5165c | 2009-10-27 10:57:01 -0700 | [diff] [blame] | 1269 | ep->stop_cmds_pending++; |
| 1270 | ep->stop_cmd_timer.expires = jiffies + |
| 1271 | XHCI_STOP_EP_CMD_TIMEOUT * HZ; |
| 1272 | add_timer(&ep->stop_cmd_timer); |
Andiry Xu | be88fe4 | 2010-10-14 07:22:57 -0700 | [diff] [blame] | 1273 | xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index, 0); |
Sarah Sharp | 23e3be1 | 2009-04-29 19:05:20 -0700 | [diff] [blame] | 1274 | xhci_ring_cmd_db(xhci); |
Sarah Sharp | ae63674 | 2009-04-29 19:02:31 -0700 | [diff] [blame] | 1275 | } |
| 1276 | done: |
| 1277 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 1278 | return ret; |
Sarah Sharp | d0e96f5a | 2009-04-27 19:58:01 -0700 | [diff] [blame] | 1279 | } |
| 1280 | |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1281 | /* Drop an endpoint from a new bandwidth configuration for this device. |
| 1282 | * Only one call to this function is allowed per endpoint before |
| 1283 | * check_bandwidth() or reset_bandwidth() must be called. |
| 1284 | * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will |
| 1285 | * add the endpoint to the schedule with possibly new parameters denoted by a |
| 1286 | * different endpoint descriptor in usb_host_endpoint. |
| 1287 | * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is |
| 1288 | * not allowed. |
Sarah Sharp | f88ba78 | 2009-05-14 11:44:22 -0700 | [diff] [blame] | 1289 | * |
| 1290 | * The USB core will not allow URBs to be queued to an endpoint that is being |
| 1291 | * disabled, so there's no need for mutual exclusion to protect |
| 1292 | * the xhci->devs[slot_id] structure. |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1293 | */ |
| 1294 | int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, |
| 1295 | struct usb_host_endpoint *ep) |
| 1296 | { |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1297 | struct xhci_hcd *xhci; |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1298 | struct xhci_container_ctx *in_ctx, *out_ctx; |
| 1299 | struct xhci_input_control_ctx *ctrl_ctx; |
| 1300 | struct xhci_slot_ctx *slot_ctx; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1301 | unsigned int last_ctx; |
| 1302 | unsigned int ep_index; |
| 1303 | struct xhci_ep_ctx *ep_ctx; |
| 1304 | u32 drop_flag; |
| 1305 | u32 new_add_flags, new_drop_flags, new_slot_info; |
| 1306 | int ret; |
| 1307 | |
Andiry Xu | 6492773 | 2010-10-14 07:22:45 -0700 | [diff] [blame] | 1308 | ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1309 | if (ret <= 0) |
| 1310 | return ret; |
| 1311 | xhci = hcd_to_xhci(hcd); |
Greg Kroah-Hartman | 700e205 | 2009-04-29 19:14:08 -0700 | [diff] [blame] | 1312 | xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1313 | |
| 1314 | drop_flag = xhci_get_endpoint_flag(&ep->desc); |
| 1315 | if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) { |
| 1316 | xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n", |
| 1317 | __func__, drop_flag); |
| 1318 | return 0; |
| 1319 | } |
| 1320 | |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1321 | in_ctx = xhci->devs[udev->slot_id]->in_ctx; |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1322 | out_ctx = xhci->devs[udev->slot_id]->out_ctx; |
| 1323 | ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1324 | ep_index = xhci_get_endpoint_index(&ep->desc); |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1325 | ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1326 | /* If the HC already knows the endpoint is disabled, |
| 1327 | * or the HCD has noted it is disabled, ignore this request |
| 1328 | */ |
| 1329 | if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED || |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1330 | ctrl_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) { |
Greg Kroah-Hartman | 700e205 | 2009-04-29 19:14:08 -0700 | [diff] [blame] | 1331 | xhci_warn(xhci, "xHCI %s called with disabled ep %p\n", |
| 1332 | __func__, ep); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1333 | return 0; |
| 1334 | } |
| 1335 | |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1336 | ctrl_ctx->drop_flags |= drop_flag; |
| 1337 | new_drop_flags = ctrl_ctx->drop_flags; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1338 | |
Sarah Sharp | 0a023c6 | 2009-09-18 08:55:12 -0700 | [diff] [blame] | 1339 | ctrl_ctx->add_flags &= ~drop_flag; |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1340 | new_add_flags = ctrl_ctx->add_flags; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1341 | |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1342 | last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags); |
| 1343 | slot_ctx = xhci_get_slot_ctx(xhci, in_ctx); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1344 | /* Update the last valid endpoint context, if we deleted the last one */ |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1345 | if ((slot_ctx->dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) { |
| 1346 | slot_ctx->dev_info &= ~LAST_CTX_MASK; |
| 1347 | slot_ctx->dev_info |= LAST_CTX(last_ctx); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1348 | } |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1349 | new_slot_info = slot_ctx->dev_info; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1350 | |
| 1351 | xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); |
| 1352 | |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1353 | xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", |
| 1354 | (unsigned int) ep->desc.bEndpointAddress, |
| 1355 | udev->slot_id, |
| 1356 | (unsigned int) new_drop_flags, |
| 1357 | (unsigned int) new_add_flags, |
| 1358 | (unsigned int) new_slot_info); |
| 1359 | return 0; |
| 1360 | } |
| 1361 | |
| 1362 | /* Add an endpoint to a new possible bandwidth configuration for this device. |
| 1363 | * Only one call to this function is allowed per endpoint before |
| 1364 | * check_bandwidth() or reset_bandwidth() must be called. |
| 1365 | * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will |
| 1366 | * add the endpoint to the schedule with possibly new parameters denoted by a |
| 1367 | * different endpoint descriptor in usb_host_endpoint. |
| 1368 | * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is |
| 1369 | * not allowed. |
Sarah Sharp | f88ba78 | 2009-05-14 11:44:22 -0700 | [diff] [blame] | 1370 | * |
| 1371 | * The USB core will not allow URBs to be queued to an endpoint until the |
| 1372 | * configuration or alt setting is installed in the device, so there's no need |
| 1373 | * for mutual exclusion to protect the xhci->devs[slot_id] structure. |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1374 | */ |
| 1375 | int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, |
| 1376 | struct usb_host_endpoint *ep) |
| 1377 | { |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1378 | struct xhci_hcd *xhci; |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1379 | struct xhci_container_ctx *in_ctx, *out_ctx; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1380 | unsigned int ep_index; |
| 1381 | struct xhci_ep_ctx *ep_ctx; |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1382 | struct xhci_slot_ctx *slot_ctx; |
| 1383 | struct xhci_input_control_ctx *ctrl_ctx; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1384 | u32 added_ctxs; |
| 1385 | unsigned int last_ctx; |
| 1386 | u32 new_add_flags, new_drop_flags, new_slot_info; |
| 1387 | int ret = 0; |
| 1388 | |
Andiry Xu | 6492773 | 2010-10-14 07:22:45 -0700 | [diff] [blame] | 1389 | ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); |
Sarah Sharp | a1587d9 | 2009-07-27 12:03:15 -0700 | [diff] [blame] | 1390 | if (ret <= 0) { |
| 1391 | /* So we won't queue a reset ep command for a root hub */ |
| 1392 | ep->hcpriv = NULL; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1393 | return ret; |
Sarah Sharp | a1587d9 | 2009-07-27 12:03:15 -0700 | [diff] [blame] | 1394 | } |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1395 | xhci = hcd_to_xhci(hcd); |
| 1396 | |
| 1397 | added_ctxs = xhci_get_endpoint_flag(&ep->desc); |
| 1398 | last_ctx = xhci_last_valid_endpoint(added_ctxs); |
| 1399 | if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) { |
| 1400 | /* FIXME when we have to issue an evaluate endpoint command to |
| 1401 | * deal with ep0 max packet size changing once we get the |
| 1402 | * descriptors |
| 1403 | */ |
| 1404 | xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n", |
| 1405 | __func__, added_ctxs); |
| 1406 | return 0; |
| 1407 | } |
| 1408 | |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1409 | in_ctx = xhci->devs[udev->slot_id]->in_ctx; |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1410 | out_ctx = xhci->devs[udev->slot_id]->out_ctx; |
| 1411 | ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1412 | ep_index = xhci_get_endpoint_index(&ep->desc); |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1413 | ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1414 | /* If the HCD has already noted the endpoint is enabled, |
| 1415 | * ignore this request. |
| 1416 | */ |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1417 | if (ctrl_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) { |
Greg Kroah-Hartman | 700e205 | 2009-04-29 19:14:08 -0700 | [diff] [blame] | 1418 | xhci_warn(xhci, "xHCI %s called with enabled ep %p\n", |
| 1419 | __func__, ep); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1420 | return 0; |
| 1421 | } |
| 1422 | |
Sarah Sharp | f88ba78 | 2009-05-14 11:44:22 -0700 | [diff] [blame] | 1423 | /* |
| 1424 | * Configuration and alternate setting changes must be done in |
| 1425 | * process context, not interrupt context (or so documenation |
| 1426 | * for usb_set_interface() and usb_set_configuration() claim). |
| 1427 | */ |
| 1428 | if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id], |
Oliver Neukum | 319c3ea | 2009-12-16 19:43:59 +0100 | [diff] [blame] | 1429 | udev, ep, GFP_NOIO) < 0) { |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1430 | dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n", |
| 1431 | __func__, ep->desc.bEndpointAddress); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1432 | return -ENOMEM; |
| 1433 | } |
| 1434 | |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1435 | ctrl_ctx->add_flags |= added_ctxs; |
| 1436 | new_add_flags = ctrl_ctx->add_flags; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1437 | |
| 1438 | /* If xhci_endpoint_disable() was called for this endpoint, but the |
| 1439 | * xHC hasn't been notified yet through the check_bandwidth() call, |
| 1440 | * this re-adds a new state for the endpoint from the new endpoint |
| 1441 | * descriptors. We must drop and re-add this endpoint, so we leave the |
| 1442 | * drop flags alone. |
| 1443 | */ |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1444 | new_drop_flags = ctrl_ctx->drop_flags; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1445 | |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1446 | slot_ctx = xhci_get_slot_ctx(xhci, in_ctx); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1447 | /* Update the last valid endpoint context, if we just added one past */ |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1448 | if ((slot_ctx->dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) { |
| 1449 | slot_ctx->dev_info &= ~LAST_CTX_MASK; |
| 1450 | slot_ctx->dev_info |= LAST_CTX(last_ctx); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1451 | } |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1452 | new_slot_info = slot_ctx->dev_info; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1453 | |
Sarah Sharp | a1587d9 | 2009-07-27 12:03:15 -0700 | [diff] [blame] | 1454 | /* Store the usb_device pointer for later use */ |
| 1455 | ep->hcpriv = udev; |
| 1456 | |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1457 | xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", |
| 1458 | (unsigned int) ep->desc.bEndpointAddress, |
| 1459 | udev->slot_id, |
| 1460 | (unsigned int) new_drop_flags, |
| 1461 | (unsigned int) new_add_flags, |
| 1462 | (unsigned int) new_slot_info); |
| 1463 | return 0; |
| 1464 | } |
| 1465 | |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1466 | static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev) |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1467 | { |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1468 | struct xhci_input_control_ctx *ctrl_ctx; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1469 | struct xhci_ep_ctx *ep_ctx; |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1470 | struct xhci_slot_ctx *slot_ctx; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1471 | int i; |
| 1472 | |
| 1473 | /* When a device's add flag and drop flag are zero, any subsequent |
| 1474 | * configure endpoint command will leave that endpoint's state |
| 1475 | * untouched. Make sure we don't leave any old state in the input |
| 1476 | * endpoint contexts. |
| 1477 | */ |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1478 | ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); |
| 1479 | ctrl_ctx->drop_flags = 0; |
| 1480 | ctrl_ctx->add_flags = 0; |
| 1481 | slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); |
| 1482 | slot_ctx->dev_info &= ~LAST_CTX_MASK; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1483 | /* Endpoint 0 is always valid */ |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1484 | slot_ctx->dev_info |= LAST_CTX(1); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1485 | for (i = 1; i < 31; ++i) { |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1486 | ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1487 | ep_ctx->ep_info = 0; |
| 1488 | ep_ctx->ep_info2 = 0; |
Sarah Sharp | 8e595a5 | 2009-07-27 12:03:31 -0700 | [diff] [blame] | 1489 | ep_ctx->deq = 0; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1490 | ep_ctx->tx_info = 0; |
| 1491 | } |
| 1492 | } |
| 1493 | |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1494 | static int xhci_configure_endpoint_result(struct xhci_hcd *xhci, |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1495 | struct usb_device *udev, int *cmd_status) |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1496 | { |
| 1497 | int ret; |
| 1498 | |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1499 | switch (*cmd_status) { |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1500 | case COMP_ENOMEM: |
| 1501 | dev_warn(&udev->dev, "Not enough host controller resources " |
| 1502 | "for new device state.\n"); |
| 1503 | ret = -ENOMEM; |
| 1504 | /* FIXME: can we allocate more resources for the HC? */ |
| 1505 | break; |
| 1506 | case COMP_BW_ERR: |
| 1507 | dev_warn(&udev->dev, "Not enough bandwidth " |
| 1508 | "for new device state.\n"); |
| 1509 | ret = -ENOSPC; |
| 1510 | /* FIXME: can we go back to the old state? */ |
| 1511 | break; |
| 1512 | case COMP_TRB_ERR: |
| 1513 | /* the HCD set up something wrong */ |
| 1514 | dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, " |
| 1515 | "add flag = 1, " |
| 1516 | "and endpoint is not disabled.\n"); |
| 1517 | ret = -EINVAL; |
| 1518 | break; |
| 1519 | case COMP_SUCCESS: |
| 1520 | dev_dbg(&udev->dev, "Successful Endpoint Configure command\n"); |
| 1521 | ret = 0; |
| 1522 | break; |
| 1523 | default: |
| 1524 | xhci_err(xhci, "ERROR: unexpected command completion " |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1525 | "code 0x%x.\n", *cmd_status); |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1526 | ret = -EINVAL; |
| 1527 | break; |
| 1528 | } |
| 1529 | return ret; |
| 1530 | } |
| 1531 | |
| 1532 | static int xhci_evaluate_context_result(struct xhci_hcd *xhci, |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1533 | struct usb_device *udev, int *cmd_status) |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1534 | { |
| 1535 | int ret; |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1536 | struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id]; |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1537 | |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1538 | switch (*cmd_status) { |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1539 | case COMP_EINVAL: |
| 1540 | dev_warn(&udev->dev, "WARN: xHCI driver setup invalid evaluate " |
| 1541 | "context command.\n"); |
| 1542 | ret = -EINVAL; |
| 1543 | break; |
| 1544 | case COMP_EBADSLT: |
| 1545 | dev_warn(&udev->dev, "WARN: slot not enabled for" |
| 1546 | "evaluate context command.\n"); |
| 1547 | case COMP_CTX_STATE: |
| 1548 | dev_warn(&udev->dev, "WARN: invalid context state for " |
| 1549 | "evaluate context command.\n"); |
| 1550 | xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1); |
| 1551 | ret = -EINVAL; |
| 1552 | break; |
| 1553 | case COMP_SUCCESS: |
| 1554 | dev_dbg(&udev->dev, "Successful evaluate context command\n"); |
| 1555 | ret = 0; |
| 1556 | break; |
| 1557 | default: |
| 1558 | xhci_err(xhci, "ERROR: unexpected command completion " |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1559 | "code 0x%x.\n", *cmd_status); |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1560 | ret = -EINVAL; |
| 1561 | break; |
| 1562 | } |
| 1563 | return ret; |
| 1564 | } |
| 1565 | |
| 1566 | /* Issue a configure endpoint command or evaluate context command |
| 1567 | * and wait for it to finish. |
| 1568 | */ |
| 1569 | static int xhci_configure_endpoint(struct xhci_hcd *xhci, |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1570 | struct usb_device *udev, |
| 1571 | struct xhci_command *command, |
| 1572 | bool ctx_change, bool must_succeed) |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1573 | { |
| 1574 | int ret; |
| 1575 | int timeleft; |
| 1576 | unsigned long flags; |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1577 | struct xhci_container_ctx *in_ctx; |
| 1578 | struct completion *cmd_completion; |
| 1579 | int *cmd_status; |
| 1580 | struct xhci_virt_device *virt_dev; |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1581 | |
| 1582 | spin_lock_irqsave(&xhci->lock, flags); |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1583 | virt_dev = xhci->devs[udev->slot_id]; |
| 1584 | if (command) { |
| 1585 | in_ctx = command->in_ctx; |
| 1586 | cmd_completion = command->completion; |
| 1587 | cmd_status = &command->status; |
| 1588 | command->command_trb = xhci->cmd_ring->enqueue; |
Paul Zimmerman | 7a3783e | 2010-11-17 16:26:50 -0800 | [diff] [blame] | 1589 | |
| 1590 | /* Enqueue pointer can be left pointing to the link TRB, |
| 1591 | * we must handle that |
| 1592 | */ |
| 1593 | if ((command->command_trb->link.control & TRB_TYPE_BITMASK) |
| 1594 | == TRB_TYPE(TRB_LINK)) |
| 1595 | command->command_trb = |
| 1596 | xhci->cmd_ring->enq_seg->next->trbs; |
| 1597 | |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1598 | list_add_tail(&command->cmd_list, &virt_dev->cmd_list); |
| 1599 | } else { |
| 1600 | in_ctx = virt_dev->in_ctx; |
| 1601 | cmd_completion = &virt_dev->cmd_completion; |
| 1602 | cmd_status = &virt_dev->cmd_status; |
| 1603 | } |
Andiry Xu | 1d68064 | 2010-03-12 17:10:04 +0800 | [diff] [blame] | 1604 | init_completion(cmd_completion); |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1605 | |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1606 | if (!ctx_change) |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1607 | ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma, |
| 1608 | udev->slot_id, must_succeed); |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1609 | else |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1610 | ret = xhci_queue_evaluate_context(xhci, in_ctx->dma, |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1611 | udev->slot_id); |
| 1612 | if (ret < 0) { |
Sarah Sharp | c01591b | 2009-12-09 15:58:58 -0800 | [diff] [blame] | 1613 | if (command) |
| 1614 | list_del(&command->cmd_list); |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1615 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 1616 | xhci_dbg(xhci, "FIXME allocate a new ring segment\n"); |
| 1617 | return -ENOMEM; |
| 1618 | } |
| 1619 | xhci_ring_cmd_db(xhci); |
| 1620 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 1621 | |
| 1622 | /* Wait for the configure endpoint command to complete */ |
| 1623 | timeleft = wait_for_completion_interruptible_timeout( |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1624 | cmd_completion, |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1625 | USB_CTRL_SET_TIMEOUT); |
| 1626 | if (timeleft <= 0) { |
| 1627 | xhci_warn(xhci, "%s while waiting for %s command\n", |
| 1628 | timeleft == 0 ? "Timeout" : "Signal", |
| 1629 | ctx_change == 0 ? |
| 1630 | "configure endpoint" : |
| 1631 | "evaluate context"); |
| 1632 | /* FIXME cancel the configure endpoint command */ |
| 1633 | return -ETIME; |
| 1634 | } |
| 1635 | |
| 1636 | if (!ctx_change) |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1637 | return xhci_configure_endpoint_result(xhci, udev, cmd_status); |
| 1638 | return xhci_evaluate_context_result(xhci, udev, cmd_status); |
Sarah Sharp | f2217e8 | 2009-08-07 14:04:43 -0700 | [diff] [blame] | 1639 | } |
| 1640 | |
Sarah Sharp | f88ba78 | 2009-05-14 11:44:22 -0700 | [diff] [blame] | 1641 | /* Called after one or more calls to xhci_add_endpoint() or |
| 1642 | * xhci_drop_endpoint(). If this call fails, the USB core is expected |
| 1643 | * to call xhci_reset_bandwidth(). |
| 1644 | * |
| 1645 | * Since we are in the middle of changing either configuration or |
| 1646 | * installing a new alt setting, the USB core won't allow URBs to be |
| 1647 | * enqueued for any endpoint on the old config or interface. Nothing |
| 1648 | * else should be touching the xhci->devs[slot_id] structure, so we |
| 1649 | * don't need to take the xhci->lock for manipulating that. |
| 1650 | */ |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1651 | int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) |
| 1652 | { |
| 1653 | int i; |
| 1654 | int ret = 0; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1655 | struct xhci_hcd *xhci; |
| 1656 | struct xhci_virt_device *virt_dev; |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1657 | struct xhci_input_control_ctx *ctrl_ctx; |
| 1658 | struct xhci_slot_ctx *slot_ctx; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1659 | |
Andiry Xu | 6492773 | 2010-10-14 07:22:45 -0700 | [diff] [blame] | 1660 | ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1661 | if (ret <= 0) |
| 1662 | return ret; |
| 1663 | xhci = hcd_to_xhci(hcd); |
| 1664 | |
Greg Kroah-Hartman | 700e205 | 2009-04-29 19:14:08 -0700 | [diff] [blame] | 1665 | xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1666 | virt_dev = xhci->devs[udev->slot_id]; |
| 1667 | |
| 1668 | /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */ |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1669 | ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); |
| 1670 | ctrl_ctx->add_flags |= SLOT_FLAG; |
| 1671 | ctrl_ctx->add_flags &= ~EP0_FLAG; |
| 1672 | ctrl_ctx->drop_flags &= ~SLOT_FLAG; |
| 1673 | ctrl_ctx->drop_flags &= ~EP0_FLAG; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1674 | xhci_dbg(xhci, "New Input Control Context:\n"); |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1675 | slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); |
| 1676 | xhci_dbg_ctx(xhci, virt_dev->in_ctx, |
| 1677 | LAST_CTX_TO_EP_NUM(slot_ctx->dev_info)); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1678 | |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1679 | ret = xhci_configure_endpoint(xhci, udev, NULL, |
| 1680 | false, false); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1681 | if (ret) { |
| 1682 | /* Callee should call reset_bandwidth() */ |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1683 | return ret; |
| 1684 | } |
| 1685 | |
| 1686 | xhci_dbg(xhci, "Output context after successful config ep cmd:\n"); |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1687 | xhci_dbg_ctx(xhci, virt_dev->out_ctx, |
| 1688 | LAST_CTX_TO_EP_NUM(slot_ctx->dev_info)); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1689 | |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1690 | xhci_zero_in_ctx(xhci, virt_dev); |
Sarah Sharp | 74f9fe2 | 2009-12-03 09:44:29 -0800 | [diff] [blame] | 1691 | /* Install new rings and free or cache any old rings */ |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1692 | for (i = 1; i < 31; ++i) { |
Sarah Sharp | 74f9fe2 | 2009-12-03 09:44:29 -0800 | [diff] [blame] | 1693 | if (!virt_dev->eps[i].new_ring) |
| 1694 | continue; |
| 1695 | /* Only cache or free the old ring if it exists. |
| 1696 | * It may not if this is the first add of an endpoint. |
| 1697 | */ |
| 1698 | if (virt_dev->eps[i].ring) { |
Sarah Sharp | 412566b | 2009-12-09 15:59:01 -0800 | [diff] [blame] | 1699 | xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1700 | } |
Sarah Sharp | 74f9fe2 | 2009-12-03 09:44:29 -0800 | [diff] [blame] | 1701 | virt_dev->eps[i].ring = virt_dev->eps[i].new_ring; |
| 1702 | virt_dev->eps[i].new_ring = NULL; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1703 | } |
| 1704 | |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1705 | return ret; |
| 1706 | } |
| 1707 | |
| 1708 | void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) |
| 1709 | { |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1710 | struct xhci_hcd *xhci; |
| 1711 | struct xhci_virt_device *virt_dev; |
| 1712 | int i, ret; |
| 1713 | |
Andiry Xu | 6492773 | 2010-10-14 07:22:45 -0700 | [diff] [blame] | 1714 | ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1715 | if (ret <= 0) |
| 1716 | return; |
| 1717 | xhci = hcd_to_xhci(hcd); |
| 1718 | |
Greg Kroah-Hartman | 700e205 | 2009-04-29 19:14:08 -0700 | [diff] [blame] | 1719 | xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1720 | virt_dev = xhci->devs[udev->slot_id]; |
| 1721 | /* Free any rings allocated for added endpoints */ |
| 1722 | for (i = 0; i < 31; ++i) { |
Sarah Sharp | 63a0d9a | 2009-09-04 10:53:09 -0700 | [diff] [blame] | 1723 | if (virt_dev->eps[i].new_ring) { |
| 1724 | xhci_ring_free(xhci, virt_dev->eps[i].new_ring); |
| 1725 | virt_dev->eps[i].new_ring = NULL; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1726 | } |
| 1727 | } |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 1728 | xhci_zero_in_ctx(xhci, virt_dev); |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 1729 | } |
| 1730 | |
Sarah Sharp | 5270b95 | 2009-09-04 10:53:11 -0700 | [diff] [blame] | 1731 | static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci, |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1732 | struct xhci_container_ctx *in_ctx, |
| 1733 | struct xhci_container_ctx *out_ctx, |
| 1734 | u32 add_flags, u32 drop_flags) |
Sarah Sharp | 5270b95 | 2009-09-04 10:53:11 -0700 | [diff] [blame] | 1735 | { |
| 1736 | struct xhci_input_control_ctx *ctrl_ctx; |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1737 | ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); |
Sarah Sharp | 5270b95 | 2009-09-04 10:53:11 -0700 | [diff] [blame] | 1738 | ctrl_ctx->add_flags = add_flags; |
| 1739 | ctrl_ctx->drop_flags = drop_flags; |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1740 | xhci_slot_copy(xhci, in_ctx, out_ctx); |
Sarah Sharp | 5270b95 | 2009-09-04 10:53:11 -0700 | [diff] [blame] | 1741 | ctrl_ctx->add_flags |= SLOT_FLAG; |
| 1742 | |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1743 | xhci_dbg(xhci, "Input Context:\n"); |
| 1744 | xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags)); |
Sarah Sharp | 5270b95 | 2009-09-04 10:53:11 -0700 | [diff] [blame] | 1745 | } |
| 1746 | |
Dmitry Torokhov | 8212a49 | 2011-02-08 13:55:59 -0800 | [diff] [blame] | 1747 | static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, |
Sarah Sharp | ac9d8fe | 2009-08-07 14:04:55 -0700 | [diff] [blame] | 1748 | unsigned int slot_id, unsigned int ep_index, |
| 1749 | struct xhci_dequeue_state *deq_state) |
| 1750 | { |
| 1751 | struct xhci_container_ctx *in_ctx; |
Sarah Sharp | ac9d8fe | 2009-08-07 14:04:55 -0700 | [diff] [blame] | 1752 | struct xhci_ep_ctx *ep_ctx; |
| 1753 | u32 added_ctxs; |
| 1754 | dma_addr_t addr; |
| 1755 | |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1756 | xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx, |
| 1757 | xhci->devs[slot_id]->out_ctx, ep_index); |
Sarah Sharp | ac9d8fe | 2009-08-07 14:04:55 -0700 | [diff] [blame] | 1758 | in_ctx = xhci->devs[slot_id]->in_ctx; |
| 1759 | ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); |
| 1760 | addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg, |
| 1761 | deq_state->new_deq_ptr); |
| 1762 | if (addr == 0) { |
| 1763 | xhci_warn(xhci, "WARN Cannot submit config ep after " |
| 1764 | "reset ep command\n"); |
| 1765 | xhci_warn(xhci, "WARN deq seg = %p, deq ptr = %p\n", |
| 1766 | deq_state->new_deq_seg, |
| 1767 | deq_state->new_deq_ptr); |
| 1768 | return; |
| 1769 | } |
| 1770 | ep_ctx->deq = addr | deq_state->new_cycle_state; |
| 1771 | |
Sarah Sharp | ac9d8fe | 2009-08-07 14:04:55 -0700 | [diff] [blame] | 1772 | added_ctxs = xhci_get_endpoint_flag_from_index(ep_index); |
Sarah Sharp | 913a8a3 | 2009-09-04 10:53:13 -0700 | [diff] [blame] | 1773 | xhci_setup_input_ctx_for_config_ep(xhci, xhci->devs[slot_id]->in_ctx, |
| 1774 | xhci->devs[slot_id]->out_ctx, added_ctxs, added_ctxs); |
Sarah Sharp | ac9d8fe | 2009-08-07 14:04:55 -0700 | [diff] [blame] | 1775 | } |
| 1776 | |
Sarah Sharp | 82d1009 | 2009-08-07 14:04:52 -0700 | [diff] [blame] | 1777 | void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, |
Sarah Sharp | 63a0d9a | 2009-09-04 10:53:09 -0700 | [diff] [blame] | 1778 | struct usb_device *udev, unsigned int ep_index) |
Sarah Sharp | 82d1009 | 2009-08-07 14:04:52 -0700 | [diff] [blame] | 1779 | { |
| 1780 | struct xhci_dequeue_state deq_state; |
Sarah Sharp | 63a0d9a | 2009-09-04 10:53:09 -0700 | [diff] [blame] | 1781 | struct xhci_virt_ep *ep; |
Sarah Sharp | 82d1009 | 2009-08-07 14:04:52 -0700 | [diff] [blame] | 1782 | |
| 1783 | xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n"); |
Sarah Sharp | 63a0d9a | 2009-09-04 10:53:09 -0700 | [diff] [blame] | 1784 | ep = &xhci->devs[udev->slot_id]->eps[ep_index]; |
Sarah Sharp | 82d1009 | 2009-08-07 14:04:52 -0700 | [diff] [blame] | 1785 | /* We need to move the HW's dequeue pointer past this TD, |
| 1786 | * or it will attempt to resend it on the next doorbell ring. |
| 1787 | */ |
| 1788 | xhci_find_new_dequeue_state(xhci, udev->slot_id, |
Sarah Sharp | e9df17e | 2010-04-02 15:34:43 -0700 | [diff] [blame] | 1789 | ep_index, ep->stopped_stream, ep->stopped_td, |
Sarah Sharp | ac9d8fe | 2009-08-07 14:04:55 -0700 | [diff] [blame] | 1790 | &deq_state); |
Sarah Sharp | 82d1009 | 2009-08-07 14:04:52 -0700 | [diff] [blame] | 1791 | |
Sarah Sharp | ac9d8fe | 2009-08-07 14:04:55 -0700 | [diff] [blame] | 1792 | /* HW with the reset endpoint quirk will use the saved dequeue state to |
| 1793 | * issue a configure endpoint command later. |
| 1794 | */ |
| 1795 | if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) { |
| 1796 | xhci_dbg(xhci, "Queueing new dequeue state\n"); |
Sarah Sharp | 63a0d9a | 2009-09-04 10:53:09 -0700 | [diff] [blame] | 1797 | xhci_queue_new_dequeue_state(xhci, udev->slot_id, |
Sarah Sharp | e9df17e | 2010-04-02 15:34:43 -0700 | [diff] [blame] | 1798 | ep_index, ep->stopped_stream, &deq_state); |
Sarah Sharp | ac9d8fe | 2009-08-07 14:04:55 -0700 | [diff] [blame] | 1799 | } else { |
| 1800 | /* Better hope no one uses the input context between now and the |
| 1801 | * reset endpoint completion! |
Sarah Sharp | e9df17e | 2010-04-02 15:34:43 -0700 | [diff] [blame] | 1802 | * XXX: No idea how this hardware will react when stream rings |
| 1803 | * are enabled. |
Sarah Sharp | ac9d8fe | 2009-08-07 14:04:55 -0700 | [diff] [blame] | 1804 | */ |
| 1805 | xhci_dbg(xhci, "Setting up input context for " |
| 1806 | "configure endpoint command\n"); |
| 1807 | xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id, |
| 1808 | ep_index, &deq_state); |
| 1809 | } |
Sarah Sharp | 82d1009 | 2009-08-07 14:04:52 -0700 | [diff] [blame] | 1810 | } |
| 1811 | |
Sarah Sharp | a1587d9 | 2009-07-27 12:03:15 -0700 | [diff] [blame] | 1812 | /* Deal with stalled endpoints. The core should have sent the control message |
| 1813 | * to clear the halt condition. However, we need to make the xHCI hardware |
| 1814 | * reset its sequence number, since a device will expect a sequence number of |
| 1815 | * zero after the halt condition is cleared. |
| 1816 | * Context: in_interrupt |
| 1817 | */ |
| 1818 | void xhci_endpoint_reset(struct usb_hcd *hcd, |
| 1819 | struct usb_host_endpoint *ep) |
| 1820 | { |
| 1821 | struct xhci_hcd *xhci; |
| 1822 | struct usb_device *udev; |
| 1823 | unsigned int ep_index; |
| 1824 | unsigned long flags; |
| 1825 | int ret; |
Sarah Sharp | 63a0d9a | 2009-09-04 10:53:09 -0700 | [diff] [blame] | 1826 | struct xhci_virt_ep *virt_ep; |
Sarah Sharp | a1587d9 | 2009-07-27 12:03:15 -0700 | [diff] [blame] | 1827 | |
| 1828 | xhci = hcd_to_xhci(hcd); |
| 1829 | udev = (struct usb_device *) ep->hcpriv; |
| 1830 | /* Called with a root hub endpoint (or an endpoint that wasn't added |
| 1831 | * with xhci_add_endpoint() |
| 1832 | */ |
| 1833 | if (!ep->hcpriv) |
| 1834 | return; |
| 1835 | ep_index = xhci_get_endpoint_index(&ep->desc); |
Sarah Sharp | 63a0d9a | 2009-09-04 10:53:09 -0700 | [diff] [blame] | 1836 | virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index]; |
| 1837 | if (!virt_ep->stopped_td) { |
Sarah Sharp | c92bcfa | 2009-07-27 12:05:21 -0700 | [diff] [blame] | 1838 | xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n", |
| 1839 | ep->desc.bEndpointAddress); |
| 1840 | return; |
| 1841 | } |
Sarah Sharp | 82d1009 | 2009-08-07 14:04:52 -0700 | [diff] [blame] | 1842 | if (usb_endpoint_xfer_control(&ep->desc)) { |
| 1843 | xhci_dbg(xhci, "Control endpoint stall already handled.\n"); |
| 1844 | return; |
| 1845 | } |
Sarah Sharp | a1587d9 | 2009-07-27 12:03:15 -0700 | [diff] [blame] | 1846 | |
| 1847 | xhci_dbg(xhci, "Queueing reset endpoint command\n"); |
| 1848 | spin_lock_irqsave(&xhci->lock, flags); |
| 1849 | ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index); |
Sarah Sharp | c92bcfa | 2009-07-27 12:05:21 -0700 | [diff] [blame] | 1850 | /* |
| 1851 | * Can't change the ring dequeue pointer until it's transitioned to the |
| 1852 | * stopped state, which is only upon a successful reset endpoint |
| 1853 | * command. Better hope that last command worked! |
| 1854 | */ |
Sarah Sharp | a1587d9 | 2009-07-27 12:03:15 -0700 | [diff] [blame] | 1855 | if (!ret) { |
Sarah Sharp | 63a0d9a | 2009-09-04 10:53:09 -0700 | [diff] [blame] | 1856 | xhci_cleanup_stalled_ring(xhci, udev, ep_index); |
| 1857 | kfree(virt_ep->stopped_td); |
Sarah Sharp | a1587d9 | 2009-07-27 12:03:15 -0700 | [diff] [blame] | 1858 | xhci_ring_cmd_db(xhci); |
| 1859 | } |
Sarah Sharp | 1624ae1 | 2010-05-06 13:40:08 -0700 | [diff] [blame] | 1860 | virt_ep->stopped_td = NULL; |
| 1861 | virt_ep->stopped_trb = NULL; |
Sarah Sharp | 5e5cf6f | 2010-05-06 13:40:18 -0700 | [diff] [blame] | 1862 | virt_ep->stopped_stream = 0; |
Sarah Sharp | a1587d9 | 2009-07-27 12:03:15 -0700 | [diff] [blame] | 1863 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 1864 | |
| 1865 | if (ret) |
| 1866 | xhci_warn(xhci, "FIXME allocate a new ring segment\n"); |
| 1867 | } |
| 1868 | |
Sarah Sharp | 8df75f4 | 2010-04-02 15:34:16 -0700 | [diff] [blame] | 1869 | static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, |
| 1870 | struct usb_device *udev, struct usb_host_endpoint *ep, |
| 1871 | unsigned int slot_id) |
| 1872 | { |
| 1873 | int ret; |
| 1874 | unsigned int ep_index; |
| 1875 | unsigned int ep_state; |
| 1876 | |
| 1877 | if (!ep) |
| 1878 | return -EINVAL; |
Andiry Xu | 6492773 | 2010-10-14 07:22:45 -0700 | [diff] [blame] | 1879 | ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__); |
Sarah Sharp | 8df75f4 | 2010-04-02 15:34:16 -0700 | [diff] [blame] | 1880 | if (ret <= 0) |
| 1881 | return -EINVAL; |
Alan Stern | 842f169 | 2010-04-30 12:44:46 -0400 | [diff] [blame] | 1882 | if (ep->ss_ep_comp.bmAttributes == 0) { |
Sarah Sharp | 8df75f4 | 2010-04-02 15:34:16 -0700 | [diff] [blame] | 1883 | xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion" |
| 1884 | " descriptor for ep 0x%x does not support streams\n", |
| 1885 | ep->desc.bEndpointAddress); |
| 1886 | return -EINVAL; |
| 1887 | } |
| 1888 | |
| 1889 | ep_index = xhci_get_endpoint_index(&ep->desc); |
| 1890 | ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state; |
| 1891 | if (ep_state & EP_HAS_STREAMS || |
| 1892 | ep_state & EP_GETTING_STREAMS) { |
| 1893 | xhci_warn(xhci, "WARN: SuperSpeed bulk endpoint 0x%x " |
| 1894 | "already has streams set up.\n", |
| 1895 | ep->desc.bEndpointAddress); |
| 1896 | xhci_warn(xhci, "Send email to xHCI maintainer and ask for " |
| 1897 | "dynamic stream context array reallocation.\n"); |
| 1898 | return -EINVAL; |
| 1899 | } |
| 1900 | if (!list_empty(&xhci->devs[slot_id]->eps[ep_index].ring->td_list)) { |
| 1901 | xhci_warn(xhci, "Cannot setup streams for SuperSpeed bulk " |
| 1902 | "endpoint 0x%x; URBs are pending.\n", |
| 1903 | ep->desc.bEndpointAddress); |
| 1904 | return -EINVAL; |
| 1905 | } |
| 1906 | return 0; |
| 1907 | } |
| 1908 | |
| 1909 | static void xhci_calculate_streams_entries(struct xhci_hcd *xhci, |
| 1910 | unsigned int *num_streams, unsigned int *num_stream_ctxs) |
| 1911 | { |
| 1912 | unsigned int max_streams; |
| 1913 | |
| 1914 | /* The stream context array size must be a power of two */ |
| 1915 | *num_stream_ctxs = roundup_pow_of_two(*num_streams); |
| 1916 | /* |
| 1917 | * Find out how many primary stream array entries the host controller |
| 1918 | * supports. Later we may use secondary stream arrays (similar to 2nd |
| 1919 | * level page entries), but that's an optional feature for xHCI host |
| 1920 | * controllers. xHCs must support at least 4 stream IDs. |
| 1921 | */ |
| 1922 | max_streams = HCC_MAX_PSA(xhci->hcc_params); |
| 1923 | if (*num_stream_ctxs > max_streams) { |
| 1924 | xhci_dbg(xhci, "xHCI HW only supports %u stream ctx entries.\n", |
| 1925 | max_streams); |
| 1926 | *num_stream_ctxs = max_streams; |
| 1927 | *num_streams = max_streams; |
| 1928 | } |
| 1929 | } |
| 1930 | |
| 1931 | /* Returns an error code if one of the endpoint already has streams. |
| 1932 | * This does not change any data structures, it only checks and gathers |
| 1933 | * information. |
| 1934 | */ |
| 1935 | static int xhci_calculate_streams_and_bitmask(struct xhci_hcd *xhci, |
| 1936 | struct usb_device *udev, |
| 1937 | struct usb_host_endpoint **eps, unsigned int num_eps, |
| 1938 | unsigned int *num_streams, u32 *changed_ep_bitmask) |
| 1939 | { |
Sarah Sharp | 8df75f4 | 2010-04-02 15:34:16 -0700 | [diff] [blame] | 1940 | unsigned int max_streams; |
| 1941 | unsigned int endpoint_flag; |
| 1942 | int i; |
| 1943 | int ret; |
| 1944 | |
| 1945 | for (i = 0; i < num_eps; i++) { |
| 1946 | ret = xhci_check_streams_endpoint(xhci, udev, |
| 1947 | eps[i], udev->slot_id); |
| 1948 | if (ret < 0) |
| 1949 | return ret; |
| 1950 | |
Alan Stern | 842f169 | 2010-04-30 12:44:46 -0400 | [diff] [blame] | 1951 | max_streams = USB_SS_MAX_STREAMS( |
| 1952 | eps[i]->ss_ep_comp.bmAttributes); |
Sarah Sharp | 8df75f4 | 2010-04-02 15:34:16 -0700 | [diff] [blame] | 1953 | if (max_streams < (*num_streams - 1)) { |
| 1954 | xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n", |
| 1955 | eps[i]->desc.bEndpointAddress, |
| 1956 | max_streams); |
| 1957 | *num_streams = max_streams+1; |
| 1958 | } |
| 1959 | |
| 1960 | endpoint_flag = xhci_get_endpoint_flag(&eps[i]->desc); |
| 1961 | if (*changed_ep_bitmask & endpoint_flag) |
| 1962 | return -EINVAL; |
| 1963 | *changed_ep_bitmask |= endpoint_flag; |
| 1964 | } |
| 1965 | return 0; |
| 1966 | } |
| 1967 | |
| 1968 | static u32 xhci_calculate_no_streams_bitmask(struct xhci_hcd *xhci, |
| 1969 | struct usb_device *udev, |
| 1970 | struct usb_host_endpoint **eps, unsigned int num_eps) |
| 1971 | { |
| 1972 | u32 changed_ep_bitmask = 0; |
| 1973 | unsigned int slot_id; |
| 1974 | unsigned int ep_index; |
| 1975 | unsigned int ep_state; |
| 1976 | int i; |
| 1977 | |
| 1978 | slot_id = udev->slot_id; |
| 1979 | if (!xhci->devs[slot_id]) |
| 1980 | return 0; |
| 1981 | |
| 1982 | for (i = 0; i < num_eps; i++) { |
| 1983 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); |
| 1984 | ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state; |
| 1985 | /* Are streams already being freed for the endpoint? */ |
| 1986 | if (ep_state & EP_GETTING_NO_STREAMS) { |
| 1987 | xhci_warn(xhci, "WARN Can't disable streams for " |
| 1988 | "endpoint 0x%x\n, " |
| 1989 | "streams are being disabled already.", |
| 1990 | eps[i]->desc.bEndpointAddress); |
| 1991 | return 0; |
| 1992 | } |
| 1993 | /* Are there actually any streams to free? */ |
| 1994 | if (!(ep_state & EP_HAS_STREAMS) && |
| 1995 | !(ep_state & EP_GETTING_STREAMS)) { |
| 1996 | xhci_warn(xhci, "WARN Can't disable streams for " |
| 1997 | "endpoint 0x%x\n, " |
| 1998 | "streams are already disabled!", |
| 1999 | eps[i]->desc.bEndpointAddress); |
| 2000 | xhci_warn(xhci, "WARN xhci_free_streams() called " |
| 2001 | "with non-streams endpoint\n"); |
| 2002 | return 0; |
| 2003 | } |
| 2004 | changed_ep_bitmask |= xhci_get_endpoint_flag(&eps[i]->desc); |
| 2005 | } |
| 2006 | return changed_ep_bitmask; |
| 2007 | } |
| 2008 | |
| 2009 | /* |
| 2010 | * The USB device drivers use this function (though the HCD interface in USB |
| 2011 | * core) to prepare a set of bulk endpoints to use streams. Streams are used to |
| 2012 | * coordinate mass storage command queueing across multiple endpoints (basically |
| 2013 | * a stream ID == a task ID). |
| 2014 | * |
| 2015 | * Setting up streams involves allocating the same size stream context array |
| 2016 | * for each endpoint and issuing a configure endpoint command for all endpoints. |
| 2017 | * |
| 2018 | * Don't allow the call to succeed if one endpoint only supports one stream |
| 2019 | * (which means it doesn't support streams at all). |
| 2020 | * |
| 2021 | * Drivers may get less stream IDs than they asked for, if the host controller |
| 2022 | * hardware or endpoints claim they can't support the number of requested |
| 2023 | * stream IDs. |
| 2024 | */ |
| 2025 | int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, |
| 2026 | struct usb_host_endpoint **eps, unsigned int num_eps, |
| 2027 | unsigned int num_streams, gfp_t mem_flags) |
| 2028 | { |
| 2029 | int i, ret; |
| 2030 | struct xhci_hcd *xhci; |
| 2031 | struct xhci_virt_device *vdev; |
| 2032 | struct xhci_command *config_cmd; |
| 2033 | unsigned int ep_index; |
| 2034 | unsigned int num_stream_ctxs; |
| 2035 | unsigned long flags; |
| 2036 | u32 changed_ep_bitmask = 0; |
| 2037 | |
| 2038 | if (!eps) |
| 2039 | return -EINVAL; |
| 2040 | |
| 2041 | /* Add one to the number of streams requested to account for |
| 2042 | * stream 0 that is reserved for xHCI usage. |
| 2043 | */ |
| 2044 | num_streams += 1; |
| 2045 | xhci = hcd_to_xhci(hcd); |
| 2046 | xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n", |
| 2047 | num_streams); |
| 2048 | |
| 2049 | config_cmd = xhci_alloc_command(xhci, true, true, mem_flags); |
| 2050 | if (!config_cmd) { |
| 2051 | xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); |
| 2052 | return -ENOMEM; |
| 2053 | } |
| 2054 | |
| 2055 | /* Check to make sure all endpoints are not already configured for |
| 2056 | * streams. While we're at it, find the maximum number of streams that |
| 2057 | * all the endpoints will support and check for duplicate endpoints. |
| 2058 | */ |
| 2059 | spin_lock_irqsave(&xhci->lock, flags); |
| 2060 | ret = xhci_calculate_streams_and_bitmask(xhci, udev, eps, |
| 2061 | num_eps, &num_streams, &changed_ep_bitmask); |
| 2062 | if (ret < 0) { |
| 2063 | xhci_free_command(xhci, config_cmd); |
| 2064 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2065 | return ret; |
| 2066 | } |
| 2067 | if (num_streams <= 1) { |
| 2068 | xhci_warn(xhci, "WARN: endpoints can't handle " |
| 2069 | "more than one stream.\n"); |
| 2070 | xhci_free_command(xhci, config_cmd); |
| 2071 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2072 | return -EINVAL; |
| 2073 | } |
| 2074 | vdev = xhci->devs[udev->slot_id]; |
Lucas De Marchi | 25985ed | 2011-03-30 22:57:33 -0300 | [diff] [blame] | 2075 | /* Mark each endpoint as being in transition, so |
Sarah Sharp | 8df75f4 | 2010-04-02 15:34:16 -0700 | [diff] [blame] | 2076 | * xhci_urb_enqueue() will reject all URBs. |
| 2077 | */ |
| 2078 | for (i = 0; i < num_eps; i++) { |
| 2079 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); |
| 2080 | vdev->eps[ep_index].ep_state |= EP_GETTING_STREAMS; |
| 2081 | } |
| 2082 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2083 | |
| 2084 | /* Setup internal data structures and allocate HW data structures for |
| 2085 | * streams (but don't install the HW structures in the input context |
| 2086 | * until we're sure all memory allocation succeeded). |
| 2087 | */ |
| 2088 | xhci_calculate_streams_entries(xhci, &num_streams, &num_stream_ctxs); |
| 2089 | xhci_dbg(xhci, "Need %u stream ctx entries for %u stream IDs.\n", |
| 2090 | num_stream_ctxs, num_streams); |
| 2091 | |
| 2092 | for (i = 0; i < num_eps; i++) { |
| 2093 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); |
| 2094 | vdev->eps[ep_index].stream_info = xhci_alloc_stream_info(xhci, |
| 2095 | num_stream_ctxs, |
| 2096 | num_streams, mem_flags); |
| 2097 | if (!vdev->eps[ep_index].stream_info) |
| 2098 | goto cleanup; |
| 2099 | /* Set maxPstreams in endpoint context and update deq ptr to |
| 2100 | * point to stream context array. FIXME |
| 2101 | */ |
| 2102 | } |
| 2103 | |
| 2104 | /* Set up the input context for a configure endpoint command. */ |
| 2105 | for (i = 0; i < num_eps; i++) { |
| 2106 | struct xhci_ep_ctx *ep_ctx; |
| 2107 | |
| 2108 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); |
| 2109 | ep_ctx = xhci_get_ep_ctx(xhci, config_cmd->in_ctx, ep_index); |
| 2110 | |
| 2111 | xhci_endpoint_copy(xhci, config_cmd->in_ctx, |
| 2112 | vdev->out_ctx, ep_index); |
| 2113 | xhci_setup_streams_ep_input_ctx(xhci, ep_ctx, |
| 2114 | vdev->eps[ep_index].stream_info); |
| 2115 | } |
| 2116 | /* Tell the HW to drop its old copy of the endpoint context info |
| 2117 | * and add the updated copy from the input context. |
| 2118 | */ |
| 2119 | xhci_setup_input_ctx_for_config_ep(xhci, config_cmd->in_ctx, |
| 2120 | vdev->out_ctx, changed_ep_bitmask, changed_ep_bitmask); |
| 2121 | |
| 2122 | /* Issue and wait for the configure endpoint command */ |
| 2123 | ret = xhci_configure_endpoint(xhci, udev, config_cmd, |
| 2124 | false, false); |
| 2125 | |
| 2126 | /* xHC rejected the configure endpoint command for some reason, so we |
| 2127 | * leave the old ring intact and free our internal streams data |
| 2128 | * structure. |
| 2129 | */ |
| 2130 | if (ret < 0) |
| 2131 | goto cleanup; |
| 2132 | |
| 2133 | spin_lock_irqsave(&xhci->lock, flags); |
| 2134 | for (i = 0; i < num_eps; i++) { |
| 2135 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); |
| 2136 | vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS; |
| 2137 | xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n", |
| 2138 | udev->slot_id, ep_index); |
| 2139 | vdev->eps[ep_index].ep_state |= EP_HAS_STREAMS; |
| 2140 | } |
| 2141 | xhci_free_command(xhci, config_cmd); |
| 2142 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2143 | |
| 2144 | /* Subtract 1 for stream 0, which drivers can't use */ |
| 2145 | return num_streams - 1; |
| 2146 | |
| 2147 | cleanup: |
| 2148 | /* If it didn't work, free the streams! */ |
| 2149 | for (i = 0; i < num_eps; i++) { |
| 2150 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); |
| 2151 | xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info); |
Sarah Sharp | 8a00774 | 2010-04-30 15:37:56 -0700 | [diff] [blame] | 2152 | vdev->eps[ep_index].stream_info = NULL; |
Sarah Sharp | 8df75f4 | 2010-04-02 15:34:16 -0700 | [diff] [blame] | 2153 | /* FIXME Unset maxPstreams in endpoint context and |
| 2154 | * update deq ptr to point to normal string ring. |
| 2155 | */ |
| 2156 | vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS; |
| 2157 | vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS; |
| 2158 | xhci_endpoint_zero(xhci, vdev, eps[i]); |
| 2159 | } |
| 2160 | xhci_free_command(xhci, config_cmd); |
| 2161 | return -ENOMEM; |
| 2162 | } |
| 2163 | |
| 2164 | /* Transition the endpoint from using streams to being a "normal" endpoint |
| 2165 | * without streams. |
| 2166 | * |
| 2167 | * Modify the endpoint context state, submit a configure endpoint command, |
| 2168 | * and free all endpoint rings for streams if that completes successfully. |
| 2169 | */ |
| 2170 | int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, |
| 2171 | struct usb_host_endpoint **eps, unsigned int num_eps, |
| 2172 | gfp_t mem_flags) |
| 2173 | { |
| 2174 | int i, ret; |
| 2175 | struct xhci_hcd *xhci; |
| 2176 | struct xhci_virt_device *vdev; |
| 2177 | struct xhci_command *command; |
| 2178 | unsigned int ep_index; |
| 2179 | unsigned long flags; |
| 2180 | u32 changed_ep_bitmask; |
| 2181 | |
| 2182 | xhci = hcd_to_xhci(hcd); |
| 2183 | vdev = xhci->devs[udev->slot_id]; |
| 2184 | |
| 2185 | /* Set up a configure endpoint command to remove the streams rings */ |
| 2186 | spin_lock_irqsave(&xhci->lock, flags); |
| 2187 | changed_ep_bitmask = xhci_calculate_no_streams_bitmask(xhci, |
| 2188 | udev, eps, num_eps); |
| 2189 | if (changed_ep_bitmask == 0) { |
| 2190 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2191 | return -EINVAL; |
| 2192 | } |
| 2193 | |
| 2194 | /* Use the xhci_command structure from the first endpoint. We may have |
| 2195 | * allocated too many, but the driver may call xhci_free_streams() for |
| 2196 | * each endpoint it grouped into one call to xhci_alloc_streams(). |
| 2197 | */ |
| 2198 | ep_index = xhci_get_endpoint_index(&eps[0]->desc); |
| 2199 | command = vdev->eps[ep_index].stream_info->free_streams_command; |
| 2200 | for (i = 0; i < num_eps; i++) { |
| 2201 | struct xhci_ep_ctx *ep_ctx; |
| 2202 | |
| 2203 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); |
| 2204 | ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index); |
| 2205 | xhci->devs[udev->slot_id]->eps[ep_index].ep_state |= |
| 2206 | EP_GETTING_NO_STREAMS; |
| 2207 | |
| 2208 | xhci_endpoint_copy(xhci, command->in_ctx, |
| 2209 | vdev->out_ctx, ep_index); |
| 2210 | xhci_setup_no_streams_ep_input_ctx(xhci, ep_ctx, |
| 2211 | &vdev->eps[ep_index]); |
| 2212 | } |
| 2213 | xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx, |
| 2214 | vdev->out_ctx, changed_ep_bitmask, changed_ep_bitmask); |
| 2215 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2216 | |
| 2217 | /* Issue and wait for the configure endpoint command, |
| 2218 | * which must succeed. |
| 2219 | */ |
| 2220 | ret = xhci_configure_endpoint(xhci, udev, command, |
| 2221 | false, true); |
| 2222 | |
| 2223 | /* xHC rejected the configure endpoint command for some reason, so we |
| 2224 | * leave the streams rings intact. |
| 2225 | */ |
| 2226 | if (ret < 0) |
| 2227 | return ret; |
| 2228 | |
| 2229 | spin_lock_irqsave(&xhci->lock, flags); |
| 2230 | for (i = 0; i < num_eps; i++) { |
| 2231 | ep_index = xhci_get_endpoint_index(&eps[i]->desc); |
| 2232 | xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info); |
Sarah Sharp | 8a00774 | 2010-04-30 15:37:56 -0700 | [diff] [blame] | 2233 | vdev->eps[ep_index].stream_info = NULL; |
Sarah Sharp | 8df75f4 | 2010-04-02 15:34:16 -0700 | [diff] [blame] | 2234 | /* FIXME Unset maxPstreams in endpoint context and |
| 2235 | * update deq ptr to point to normal string ring. |
| 2236 | */ |
| 2237 | vdev->eps[ep_index].ep_state &= ~EP_GETTING_NO_STREAMS; |
| 2238 | vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS; |
| 2239 | } |
| 2240 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2241 | |
| 2242 | return 0; |
| 2243 | } |
| 2244 | |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2245 | /* |
Sarah Sharp | 2a8f82c | 2009-12-09 15:59:13 -0800 | [diff] [blame] | 2246 | * This submits a Reset Device Command, which will set the device state to 0, |
| 2247 | * set the device address to 0, and disable all the endpoints except the default |
| 2248 | * control endpoint. The USB core should come back and call |
| 2249 | * xhci_address_device(), and then re-set up the configuration. If this is |
| 2250 | * called because of a usb_reset_and_verify_device(), then the old alternate |
| 2251 | * settings will be re-installed through the normal bandwidth allocation |
| 2252 | * functions. |
| 2253 | * |
| 2254 | * Wait for the Reset Device command to finish. Remove all structures |
| 2255 | * associated with the endpoints that were disabled. Clear the input device |
| 2256 | * structure? Cache the rings? Reset the control endpoint 0 max packet size? |
Andiry Xu | f0615c4 | 2010-10-14 07:22:48 -0700 | [diff] [blame] | 2257 | * |
| 2258 | * If the virt_dev to be reset does not exist or does not match the udev, |
| 2259 | * it means the device is lost, possibly due to the xHC restore error and |
| 2260 | * re-initialization during S3/S4. In this case, call xhci_alloc_dev() to |
| 2261 | * re-allocate the device. |
Sarah Sharp | 2a8f82c | 2009-12-09 15:59:13 -0800 | [diff] [blame] | 2262 | */ |
Andiry Xu | f0615c4 | 2010-10-14 07:22:48 -0700 | [diff] [blame] | 2263 | int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) |
Sarah Sharp | 2a8f82c | 2009-12-09 15:59:13 -0800 | [diff] [blame] | 2264 | { |
| 2265 | int ret, i; |
| 2266 | unsigned long flags; |
| 2267 | struct xhci_hcd *xhci; |
| 2268 | unsigned int slot_id; |
| 2269 | struct xhci_virt_device *virt_dev; |
| 2270 | struct xhci_command *reset_device_cmd; |
| 2271 | int timeleft; |
| 2272 | int last_freed_endpoint; |
| 2273 | |
Andiry Xu | f0615c4 | 2010-10-14 07:22:48 -0700 | [diff] [blame] | 2274 | ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__); |
Sarah Sharp | 2a8f82c | 2009-12-09 15:59:13 -0800 | [diff] [blame] | 2275 | if (ret <= 0) |
| 2276 | return ret; |
| 2277 | xhci = hcd_to_xhci(hcd); |
| 2278 | slot_id = udev->slot_id; |
| 2279 | virt_dev = xhci->devs[slot_id]; |
Andiry Xu | f0615c4 | 2010-10-14 07:22:48 -0700 | [diff] [blame] | 2280 | if (!virt_dev) { |
| 2281 | xhci_dbg(xhci, "The device to be reset with slot ID %u does " |
| 2282 | "not exist. Re-allocate the device\n", slot_id); |
| 2283 | ret = xhci_alloc_dev(hcd, udev); |
| 2284 | if (ret == 1) |
| 2285 | return 0; |
| 2286 | else |
| 2287 | return -EINVAL; |
| 2288 | } |
| 2289 | |
| 2290 | if (virt_dev->udev != udev) { |
| 2291 | /* If the virt_dev and the udev does not match, this virt_dev |
| 2292 | * may belong to another udev. |
| 2293 | * Re-allocate the device. |
| 2294 | */ |
| 2295 | xhci_dbg(xhci, "The device to be reset with slot ID %u does " |
| 2296 | "not match the udev. Re-allocate the device\n", |
| 2297 | slot_id); |
| 2298 | ret = xhci_alloc_dev(hcd, udev); |
| 2299 | if (ret == 1) |
| 2300 | return 0; |
| 2301 | else |
| 2302 | return -EINVAL; |
| 2303 | } |
Sarah Sharp | 2a8f82c | 2009-12-09 15:59:13 -0800 | [diff] [blame] | 2304 | |
| 2305 | xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); |
| 2306 | /* Allocate the command structure that holds the struct completion. |
| 2307 | * Assume we're in process context, since the normal device reset |
| 2308 | * process has to wait for the device anyway. Storage devices are |
| 2309 | * reset as part of error handling, so use GFP_NOIO instead of |
| 2310 | * GFP_KERNEL. |
| 2311 | */ |
| 2312 | reset_device_cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO); |
| 2313 | if (!reset_device_cmd) { |
| 2314 | xhci_dbg(xhci, "Couldn't allocate command structure.\n"); |
| 2315 | return -ENOMEM; |
| 2316 | } |
| 2317 | |
| 2318 | /* Attempt to submit the Reset Device command to the command ring */ |
| 2319 | spin_lock_irqsave(&xhci->lock, flags); |
| 2320 | reset_device_cmd->command_trb = xhci->cmd_ring->enqueue; |
Paul Zimmerman | 7a3783e | 2010-11-17 16:26:50 -0800 | [diff] [blame] | 2321 | |
| 2322 | /* Enqueue pointer can be left pointing to the link TRB, |
| 2323 | * we must handle that |
| 2324 | */ |
| 2325 | if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK) |
| 2326 | == TRB_TYPE(TRB_LINK)) |
| 2327 | reset_device_cmd->command_trb = |
| 2328 | xhci->cmd_ring->enq_seg->next->trbs; |
| 2329 | |
Sarah Sharp | 2a8f82c | 2009-12-09 15:59:13 -0800 | [diff] [blame] | 2330 | list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); |
| 2331 | ret = xhci_queue_reset_device(xhci, slot_id); |
| 2332 | if (ret) { |
| 2333 | xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); |
| 2334 | list_del(&reset_device_cmd->cmd_list); |
| 2335 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2336 | goto command_cleanup; |
| 2337 | } |
| 2338 | xhci_ring_cmd_db(xhci); |
| 2339 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2340 | |
| 2341 | /* Wait for the Reset Device command to finish */ |
| 2342 | timeleft = wait_for_completion_interruptible_timeout( |
| 2343 | reset_device_cmd->completion, |
| 2344 | USB_CTRL_SET_TIMEOUT); |
| 2345 | if (timeleft <= 0) { |
| 2346 | xhci_warn(xhci, "%s while waiting for reset device command\n", |
| 2347 | timeleft == 0 ? "Timeout" : "Signal"); |
| 2348 | spin_lock_irqsave(&xhci->lock, flags); |
| 2349 | /* The timeout might have raced with the event ring handler, so |
| 2350 | * only delete from the list if the item isn't poisoned. |
| 2351 | */ |
| 2352 | if (reset_device_cmd->cmd_list.next != LIST_POISON1) |
| 2353 | list_del(&reset_device_cmd->cmd_list); |
| 2354 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2355 | ret = -ETIME; |
| 2356 | goto command_cleanup; |
| 2357 | } |
| 2358 | |
| 2359 | /* The Reset Device command can't fail, according to the 0.95/0.96 spec, |
| 2360 | * unless we tried to reset a slot ID that wasn't enabled, |
| 2361 | * or the device wasn't in the addressed or configured state. |
| 2362 | */ |
| 2363 | ret = reset_device_cmd->status; |
| 2364 | switch (ret) { |
| 2365 | case COMP_EBADSLT: /* 0.95 completion code for bad slot ID */ |
| 2366 | case COMP_CTX_STATE: /* 0.96 completion code for same thing */ |
| 2367 | xhci_info(xhci, "Can't reset device (slot ID %u) in %s state\n", |
| 2368 | slot_id, |
| 2369 | xhci_get_slot_state(xhci, virt_dev->out_ctx)); |
| 2370 | xhci_info(xhci, "Not freeing device rings.\n"); |
| 2371 | /* Don't treat this as an error. May change my mind later. */ |
| 2372 | ret = 0; |
| 2373 | goto command_cleanup; |
| 2374 | case COMP_SUCCESS: |
| 2375 | xhci_dbg(xhci, "Successful reset device command.\n"); |
| 2376 | break; |
| 2377 | default: |
| 2378 | if (xhci_is_vendor_info_code(xhci, ret)) |
| 2379 | break; |
| 2380 | xhci_warn(xhci, "Unknown completion code %u for " |
| 2381 | "reset device command.\n", ret); |
| 2382 | ret = -EINVAL; |
| 2383 | goto command_cleanup; |
| 2384 | } |
| 2385 | |
| 2386 | /* Everything but endpoint 0 is disabled, so free or cache the rings. */ |
| 2387 | last_freed_endpoint = 1; |
| 2388 | for (i = 1; i < 31; ++i) { |
Dmitry Torokhov | 2dea75d | 2011-04-12 23:06:28 -0700 | [diff] [blame] | 2389 | struct xhci_virt_ep *ep = &virt_dev->eps[i]; |
| 2390 | |
| 2391 | if (ep->ep_state & EP_HAS_STREAMS) { |
| 2392 | xhci_free_stream_info(xhci, ep->stream_info); |
| 2393 | ep->stream_info = NULL; |
| 2394 | ep->ep_state &= ~EP_HAS_STREAMS; |
| 2395 | } |
| 2396 | |
| 2397 | if (ep->ring) { |
| 2398 | xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); |
| 2399 | last_freed_endpoint = i; |
| 2400 | } |
Sarah Sharp | 2a8f82c | 2009-12-09 15:59:13 -0800 | [diff] [blame] | 2401 | } |
| 2402 | xhci_dbg(xhci, "Output context after successful reset device cmd:\n"); |
| 2403 | xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint); |
| 2404 | ret = 0; |
| 2405 | |
| 2406 | command_cleanup: |
| 2407 | xhci_free_command(xhci, reset_device_cmd); |
| 2408 | return ret; |
| 2409 | } |
| 2410 | |
| 2411 | /* |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2412 | * At this point, the struct usb_device is about to go away, the device has |
| 2413 | * disconnected, and all traffic has been stopped and the endpoints have been |
| 2414 | * disabled. Free any HC data structures associated with that device. |
| 2415 | */ |
| 2416 | void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) |
| 2417 | { |
| 2418 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
Sarah Sharp | 6f5165c | 2009-10-27 10:57:01 -0700 | [diff] [blame] | 2419 | struct xhci_virt_device *virt_dev; |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2420 | unsigned long flags; |
Sarah Sharp | c526d0d | 2009-09-16 16:42:39 -0700 | [diff] [blame] | 2421 | u32 state; |
Andiry Xu | 6492773 | 2010-10-14 07:22:45 -0700 | [diff] [blame] | 2422 | int i, ret; |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2423 | |
Andiry Xu | 6492773 | 2010-10-14 07:22:45 -0700 | [diff] [blame] | 2424 | ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__); |
| 2425 | if (ret <= 0) |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2426 | return; |
Andiry Xu | 6492773 | 2010-10-14 07:22:45 -0700 | [diff] [blame] | 2427 | |
Sarah Sharp | 6f5165c | 2009-10-27 10:57:01 -0700 | [diff] [blame] | 2428 | virt_dev = xhci->devs[udev->slot_id]; |
Sarah Sharp | 6f5165c | 2009-10-27 10:57:01 -0700 | [diff] [blame] | 2429 | |
| 2430 | /* Stop any wayward timer functions (which may grab the lock) */ |
| 2431 | for (i = 0; i < 31; ++i) { |
| 2432 | virt_dev->eps[i].ep_state &= ~EP_HALT_PENDING; |
| 2433 | del_timer_sync(&virt_dev->eps[i].stop_cmd_timer); |
| 2434 | } |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2435 | |
| 2436 | spin_lock_irqsave(&xhci->lock, flags); |
Sarah Sharp | c526d0d | 2009-09-16 16:42:39 -0700 | [diff] [blame] | 2437 | /* Don't disable the slot if the host controller is dead. */ |
| 2438 | state = xhci_readl(xhci, &xhci->op_regs->status); |
Sarah Sharp | 6f5165c | 2009-10-27 10:57:01 -0700 | [diff] [blame] | 2439 | if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING)) { |
Sarah Sharp | c526d0d | 2009-09-16 16:42:39 -0700 | [diff] [blame] | 2440 | xhci_free_virt_device(xhci, udev->slot_id); |
| 2441 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2442 | return; |
| 2443 | } |
| 2444 | |
Sarah Sharp | 23e3be1 | 2009-04-29 19:05:20 -0700 | [diff] [blame] | 2445 | if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) { |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2446 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2447 | xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); |
| 2448 | return; |
| 2449 | } |
Sarah Sharp | 23e3be1 | 2009-04-29 19:05:20 -0700 | [diff] [blame] | 2450 | xhci_ring_cmd_db(xhci); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2451 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2452 | /* |
| 2453 | * Event command completion handler will free any data structures |
Sarah Sharp | f88ba78 | 2009-05-14 11:44:22 -0700 | [diff] [blame] | 2454 | * associated with the slot. XXX Can free sleep? |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2455 | */ |
| 2456 | } |
| 2457 | |
| 2458 | /* |
| 2459 | * Returns 0 if the xHC ran out of device slots, the Enable Slot command |
| 2460 | * timed out, or allocating memory failed. Returns 1 on success. |
| 2461 | */ |
| 2462 | int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) |
| 2463 | { |
| 2464 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 2465 | unsigned long flags; |
| 2466 | int timeleft; |
| 2467 | int ret; |
| 2468 | |
| 2469 | spin_lock_irqsave(&xhci->lock, flags); |
Sarah Sharp | 23e3be1 | 2009-04-29 19:05:20 -0700 | [diff] [blame] | 2470 | ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2471 | if (ret) { |
| 2472 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2473 | xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); |
| 2474 | return 0; |
| 2475 | } |
Sarah Sharp | 23e3be1 | 2009-04-29 19:05:20 -0700 | [diff] [blame] | 2476 | xhci_ring_cmd_db(xhci); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2477 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2478 | |
| 2479 | /* XXX: how much time for xHC slot assignment? */ |
| 2480 | timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, |
| 2481 | USB_CTRL_SET_TIMEOUT); |
| 2482 | if (timeleft <= 0) { |
| 2483 | xhci_warn(xhci, "%s while waiting for a slot\n", |
| 2484 | timeleft == 0 ? "Timeout" : "Signal"); |
| 2485 | /* FIXME cancel the enable slot request */ |
| 2486 | return 0; |
| 2487 | } |
| 2488 | |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2489 | if (!xhci->slot_id) { |
| 2490 | xhci_err(xhci, "Error while assigning device slot ID\n"); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2491 | return 0; |
| 2492 | } |
Sarah Sharp | a6d940d | 2010-12-28 13:08:42 -0800 | [diff] [blame] | 2493 | /* xhci_alloc_virt_device() does not touch rings; no need to lock. |
| 2494 | * Use GFP_NOIO, since this function can be called from |
| 2495 | * xhci_discover_or_reset_device(), which may be called as part of |
| 2496 | * mass storage driver error handling. |
| 2497 | */ |
| 2498 | if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) { |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2499 | /* Disable slot, if we can do it without mem alloc */ |
| 2500 | xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); |
Sarah Sharp | f88ba78 | 2009-05-14 11:44:22 -0700 | [diff] [blame] | 2501 | spin_lock_irqsave(&xhci->lock, flags); |
Sarah Sharp | 23e3be1 | 2009-04-29 19:05:20 -0700 | [diff] [blame] | 2502 | if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) |
| 2503 | xhci_ring_cmd_db(xhci); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2504 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2505 | return 0; |
| 2506 | } |
| 2507 | udev->slot_id = xhci->slot_id; |
| 2508 | /* Is this a LS or FS device under a HS hub? */ |
| 2509 | /* Hub or peripherial? */ |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2510 | return 1; |
| 2511 | } |
| 2512 | |
| 2513 | /* |
| 2514 | * Issue an Address Device command (which will issue a SetAddress request to |
| 2515 | * the device). |
| 2516 | * We should be protected by the usb_address0_mutex in khubd's hub_port_init, so |
| 2517 | * we should only issue and wait on one address command at the same time. |
| 2518 | * |
| 2519 | * We add one to the device address issued by the hardware because the USB core |
| 2520 | * uses address 1 for the root hubs (even though they're not really devices). |
| 2521 | */ |
| 2522 | int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) |
| 2523 | { |
| 2524 | unsigned long flags; |
| 2525 | int timeleft; |
| 2526 | struct xhci_virt_device *virt_dev; |
| 2527 | int ret = 0; |
| 2528 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 2529 | struct xhci_slot_ctx *slot_ctx; |
| 2530 | struct xhci_input_control_ctx *ctrl_ctx; |
Sarah Sharp | 8e595a5 | 2009-07-27 12:03:31 -0700 | [diff] [blame] | 2531 | u64 temp_64; |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2532 | |
| 2533 | if (!udev->slot_id) { |
| 2534 | xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id); |
| 2535 | return -EINVAL; |
| 2536 | } |
| 2537 | |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2538 | virt_dev = xhci->devs[udev->slot_id]; |
| 2539 | |
Andiry Xu | f0615c4 | 2010-10-14 07:22:48 -0700 | [diff] [blame] | 2540 | slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); |
| 2541 | /* |
| 2542 | * If this is the first Set Address since device plug-in or |
| 2543 | * virt_device realloaction after a resume with an xHCI power loss, |
| 2544 | * then set up the slot context. |
| 2545 | */ |
| 2546 | if (!slot_ctx->dev_info) |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2547 | xhci_setup_addressable_virt_dev(xhci, udev); |
Andiry Xu | f0615c4 | 2010-10-14 07:22:48 -0700 | [diff] [blame] | 2548 | /* Otherwise, update the control endpoint ring enqueue pointer. */ |
Sarah Sharp | 2d1ee59 | 2010-07-09 17:08:54 +0200 | [diff] [blame] | 2549 | else |
| 2550 | xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev); |
Sarah Sharp | 66e49d8 | 2009-07-27 12:03:46 -0700 | [diff] [blame] | 2551 | xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 2552 | xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2553 | |
Sarah Sharp | f88ba78 | 2009-05-14 11:44:22 -0700 | [diff] [blame] | 2554 | spin_lock_irqsave(&xhci->lock, flags); |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 2555 | ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma, |
| 2556 | udev->slot_id); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2557 | if (ret) { |
| 2558 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2559 | xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); |
| 2560 | return ret; |
| 2561 | } |
Sarah Sharp | 23e3be1 | 2009-04-29 19:05:20 -0700 | [diff] [blame] | 2562 | xhci_ring_cmd_db(xhci); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2563 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2564 | |
| 2565 | /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */ |
| 2566 | timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, |
| 2567 | USB_CTRL_SET_TIMEOUT); |
| 2568 | /* FIXME: From section 4.3.4: "Software shall be responsible for timing |
| 2569 | * the SetAddress() "recovery interval" required by USB and aborting the |
| 2570 | * command on a timeout. |
| 2571 | */ |
| 2572 | if (timeleft <= 0) { |
| 2573 | xhci_warn(xhci, "%s while waiting for a slot\n", |
| 2574 | timeleft == 0 ? "Timeout" : "Signal"); |
| 2575 | /* FIXME cancel the address device command */ |
| 2576 | return -ETIME; |
| 2577 | } |
| 2578 | |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2579 | switch (virt_dev->cmd_status) { |
| 2580 | case COMP_CTX_STATE: |
| 2581 | case COMP_EBADSLT: |
| 2582 | xhci_err(xhci, "Setup ERROR: address device command for slot %d.\n", |
| 2583 | udev->slot_id); |
| 2584 | ret = -EINVAL; |
| 2585 | break; |
| 2586 | case COMP_TX_ERR: |
| 2587 | dev_warn(&udev->dev, "Device not responding to set address.\n"); |
| 2588 | ret = -EPROTO; |
| 2589 | break; |
| 2590 | case COMP_SUCCESS: |
| 2591 | xhci_dbg(xhci, "Successful Address Device command\n"); |
| 2592 | break; |
| 2593 | default: |
| 2594 | xhci_err(xhci, "ERROR: unexpected command completion " |
| 2595 | "code 0x%x.\n", virt_dev->cmd_status); |
Sarah Sharp | 66e49d8 | 2009-07-27 12:03:46 -0700 | [diff] [blame] | 2596 | xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 2597 | xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2598 | ret = -EINVAL; |
| 2599 | break; |
| 2600 | } |
| 2601 | if (ret) { |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2602 | return ret; |
| 2603 | } |
Sarah Sharp | 8e595a5 | 2009-07-27 12:03:31 -0700 | [diff] [blame] | 2604 | temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); |
| 2605 | xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64); |
| 2606 | xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n", |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2607 | udev->slot_id, |
Sarah Sharp | 8e595a5 | 2009-07-27 12:03:31 -0700 | [diff] [blame] | 2608 | &xhci->dcbaa->dev_context_ptrs[udev->slot_id], |
| 2609 | (unsigned long long) |
| 2610 | xhci->dcbaa->dev_context_ptrs[udev->slot_id]); |
Greg Kroah-Hartman | 700e205 | 2009-04-29 19:14:08 -0700 | [diff] [blame] | 2611 | xhci_dbg(xhci, "Output Context DMA address = %#08llx\n", |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 2612 | (unsigned long long)virt_dev->out_ctx->dma); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2613 | xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 2614 | xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2615 | xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 2616 | xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2617 | /* |
| 2618 | * USB core uses address 1 for the roothubs, so we add one to the |
| 2619 | * address given back to us by the HC. |
| 2620 | */ |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 2621 | slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); |
Andiry Xu | c8d4af8 | 2010-10-14 07:22:51 -0700 | [diff] [blame] | 2622 | /* Use kernel assigned address for devices; store xHC assigned |
| 2623 | * address locally. */ |
| 2624 | virt_dev->address = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1; |
Sarah Sharp | f94e0186 | 2009-04-27 19:58:38 -0700 | [diff] [blame] | 2625 | /* Zero the input context control for later use */ |
John Youn | d115b04 | 2009-07-27 12:05:15 -0700 | [diff] [blame] | 2626 | ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); |
| 2627 | ctrl_ctx->add_flags = 0; |
| 2628 | ctrl_ctx->drop_flags = 0; |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2629 | |
Andiry Xu | c8d4af8 | 2010-10-14 07:22:51 -0700 | [diff] [blame] | 2630 | xhci_dbg(xhci, "Internal device address = %d\n", virt_dev->address); |
Sarah Sharp | 3ffbba9 | 2009-04-27 19:57:38 -0700 | [diff] [blame] | 2631 | |
| 2632 | return 0; |
| 2633 | } |
| 2634 | |
Sarah Sharp | ac1c1b7 | 2009-09-04 10:53:20 -0700 | [diff] [blame] | 2635 | /* Once a hub descriptor is fetched for a device, we need to update the xHC's |
| 2636 | * internal data structures for the device. |
| 2637 | */ |
| 2638 | int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, |
| 2639 | struct usb_tt *tt, gfp_t mem_flags) |
| 2640 | { |
| 2641 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 2642 | struct xhci_virt_device *vdev; |
| 2643 | struct xhci_command *config_cmd; |
| 2644 | struct xhci_input_control_ctx *ctrl_ctx; |
| 2645 | struct xhci_slot_ctx *slot_ctx; |
| 2646 | unsigned long flags; |
| 2647 | unsigned think_time; |
| 2648 | int ret; |
| 2649 | |
| 2650 | /* Ignore root hubs */ |
| 2651 | if (!hdev->parent) |
| 2652 | return 0; |
| 2653 | |
| 2654 | vdev = xhci->devs[hdev->slot_id]; |
| 2655 | if (!vdev) { |
| 2656 | xhci_warn(xhci, "Cannot update hub desc for unknown device.\n"); |
| 2657 | return -EINVAL; |
| 2658 | } |
Sarah Sharp | a1d78c1 | 2009-12-09 15:59:03 -0800 | [diff] [blame] | 2659 | config_cmd = xhci_alloc_command(xhci, true, true, mem_flags); |
Sarah Sharp | ac1c1b7 | 2009-09-04 10:53:20 -0700 | [diff] [blame] | 2660 | if (!config_cmd) { |
| 2661 | xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); |
| 2662 | return -ENOMEM; |
| 2663 | } |
| 2664 | |
| 2665 | spin_lock_irqsave(&xhci->lock, flags); |
| 2666 | xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx); |
| 2667 | ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx); |
| 2668 | ctrl_ctx->add_flags |= SLOT_FLAG; |
| 2669 | slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx); |
| 2670 | slot_ctx->dev_info |= DEV_HUB; |
| 2671 | if (tt->multi) |
| 2672 | slot_ctx->dev_info |= DEV_MTT; |
| 2673 | if (xhci->hci_version > 0x95) { |
| 2674 | xhci_dbg(xhci, "xHCI version %x needs hub " |
| 2675 | "TT think time and number of ports\n", |
| 2676 | (unsigned int) xhci->hci_version); |
| 2677 | slot_ctx->dev_info2 |= XHCI_MAX_PORTS(hdev->maxchild); |
| 2678 | /* Set TT think time - convert from ns to FS bit times. |
| 2679 | * 0 = 8 FS bit times, 1 = 16 FS bit times, |
| 2680 | * 2 = 24 FS bit times, 3 = 32 FS bit times. |
| 2681 | */ |
| 2682 | think_time = tt->think_time; |
| 2683 | if (think_time != 0) |
| 2684 | think_time = (think_time / 666) - 1; |
| 2685 | slot_ctx->tt_info |= TT_THINK_TIME(think_time); |
| 2686 | } else { |
| 2687 | xhci_dbg(xhci, "xHCI version %x doesn't need hub " |
| 2688 | "TT think time or number of ports\n", |
| 2689 | (unsigned int) xhci->hci_version); |
| 2690 | } |
| 2691 | slot_ctx->dev_state = 0; |
| 2692 | spin_unlock_irqrestore(&xhci->lock, flags); |
| 2693 | |
| 2694 | xhci_dbg(xhci, "Set up %s for hub device.\n", |
| 2695 | (xhci->hci_version > 0x95) ? |
| 2696 | "configure endpoint" : "evaluate context"); |
| 2697 | xhci_dbg(xhci, "Slot %u Input Context:\n", hdev->slot_id); |
| 2698 | xhci_dbg_ctx(xhci, config_cmd->in_ctx, 0); |
| 2699 | |
| 2700 | /* Issue and wait for the configure endpoint or |
| 2701 | * evaluate context command. |
| 2702 | */ |
| 2703 | if (xhci->hci_version > 0x95) |
| 2704 | ret = xhci_configure_endpoint(xhci, hdev, config_cmd, |
| 2705 | false, false); |
| 2706 | else |
| 2707 | ret = xhci_configure_endpoint(xhci, hdev, config_cmd, |
| 2708 | true, false); |
| 2709 | |
| 2710 | xhci_dbg(xhci, "Slot %u Output Context:\n", hdev->slot_id); |
| 2711 | xhci_dbg_ctx(xhci, vdev->out_ctx, 0); |
| 2712 | |
| 2713 | xhci_free_command(xhci, config_cmd); |
| 2714 | return ret; |
| 2715 | } |
| 2716 | |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 2717 | int xhci_get_frame(struct usb_hcd *hcd) |
| 2718 | { |
| 2719 | struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| 2720 | /* EHCI mods by the periodic size. Why? */ |
| 2721 | return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3; |
| 2722 | } |
| 2723 | |
| 2724 | MODULE_DESCRIPTION(DRIVER_DESC); |
| 2725 | MODULE_AUTHOR(DRIVER_AUTHOR); |
| 2726 | MODULE_LICENSE("GPL"); |
| 2727 | |
| 2728 | static int __init xhci_hcd_init(void) |
| 2729 | { |
| 2730 | #ifdef CONFIG_PCI |
| 2731 | int retval = 0; |
| 2732 | |
| 2733 | retval = xhci_register_pci(); |
| 2734 | |
| 2735 | if (retval < 0) { |
| 2736 | printk(KERN_DEBUG "Problem registering PCI driver."); |
| 2737 | return retval; |
| 2738 | } |
| 2739 | #endif |
Sarah Sharp | 9844197 | 2009-05-14 11:44:18 -0700 | [diff] [blame] | 2740 | /* |
| 2741 | * Check the compiler generated sizes of structures that must be laid |
| 2742 | * out in specific ways for hardware access. |
| 2743 | */ |
| 2744 | BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8); |
| 2745 | BUILD_BUG_ON(sizeof(struct xhci_slot_ctx) != 8*32/8); |
| 2746 | BUILD_BUG_ON(sizeof(struct xhci_ep_ctx) != 8*32/8); |
| 2747 | /* xhci_device_control has eight fields, and also |
| 2748 | * embeds one xhci_slot_ctx and 31 xhci_ep_ctx |
| 2749 | */ |
Sarah Sharp | 9844197 | 2009-05-14 11:44:18 -0700 | [diff] [blame] | 2750 | BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8); |
| 2751 | BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8); |
| 2752 | BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8); |
| 2753 | BUILD_BUG_ON(sizeof(struct xhci_cap_regs) != 7*32/8); |
| 2754 | BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8); |
| 2755 | /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */ |
| 2756 | BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8); |
| 2757 | BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8); |
Sarah Sharp | 66d4ead | 2009-04-27 19:52:28 -0700 | [diff] [blame] | 2758 | return 0; |
| 2759 | } |
| 2760 | module_init(xhci_hcd_init); |
| 2761 | |
| 2762 | static void __exit xhci_hcd_cleanup(void) |
| 2763 | { |
| 2764 | #ifdef CONFIG_PCI |
| 2765 | xhci_unregister_pci(); |
| 2766 | #endif |
| 2767 | } |
| 2768 | module_exit(xhci_hcd_cleanup); |