blob: b920c3407f8b26c8c10f73d9b7c58fc9fd056a2f [file] [log] [blame]
Alek Du07ab85d2008-05-06 21:31:41 +08001/*
2 * pata_sch.c - Intel SCH PATA controllers
3 *
4 * Copyright (c) 2008 Alek Du <alek.du@intel.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License 2 as published
8 * by the Free Software Foundation.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; see the file COPYING. If not, write to
17 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
18 *
19 */
20
21/*
22 * Supports:
23 * Intel SCH (AF82US15W, AF82US15L, AF82UL11L) chipsets -- see spec at:
24 * http://download.intel.com/design/chipsets/embedded/datashts/319537.pdf
25 */
26
27#include <linux/kernel.h>
28#include <linux/module.h>
29#include <linux/pci.h>
Alek Du07ab85d2008-05-06 21:31:41 +080030#include <linux/blkdev.h>
31#include <linux/delay.h>
32#include <linux/device.h>
33#include <scsi/scsi_host.h>
34#include <linux/libata.h>
35#include <linux/dmi.h>
36
37#define DRV_NAME "pata_sch"
38#define DRV_VERSION "0.2"
39
40/* see SCH datasheet page 351 */
41enum {
42 D0TIM = 0x80, /* Device 0 Timing Register */
43 D1TIM = 0x84, /* Device 1 Timing Register */
44 PM = 0x07, /* PIO Mode Bit Mask */
45 MDM = (0x03 << 8), /* Multi-word DMA Mode Bit Mask */
46 UDM = (0x07 << 16), /* Ultra DMA Mode Bit Mask */
47 PPE = (1 << 30), /* Prefetch/Post Enable */
48 USD = (1 << 31), /* Use Synchronous DMA */
49};
50
51static int sch_init_one(struct pci_dev *pdev,
52 const struct pci_device_id *ent);
53static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev);
54static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev);
55
56static const struct pci_device_id sch_pci_tbl[] = {
57 /* Intel SCH PATA Controller */
58 { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 0 },
59 { } /* terminate list */
60};
61
62static struct pci_driver sch_pci_driver = {
63 .name = DRV_NAME,
64 .id_table = sch_pci_tbl,
65 .probe = sch_init_one,
66 .remove = ata_pci_remove_one,
Bartlomiej Zolnierkiewicz58eb8cd2014-05-07 17:17:44 +020067#ifdef CONFIG_PM_SLEEP
Alek Du07ab85d2008-05-06 21:31:41 +080068 .suspend = ata_pci_device_suspend,
69 .resume = ata_pci_device_resume,
70#endif
71};
72
73static struct scsi_host_template sch_sht = {
74 ATA_BMDMA_SHT(DRV_NAME),
75};
76
77static struct ata_port_operations sch_pata_ops = {
78 .inherits = &ata_bmdma_port_ops,
79 .cable_detect = ata_cable_unknown,
80 .set_piomode = sch_set_piomode,
81 .set_dmamode = sch_set_dmamode,
82};
83
84static struct ata_port_info sch_port_info = {
Mark Salterbc170e62008-11-06 08:03:23 -050085 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +010086 .pio_mask = ATA_PIO4,
87 .mwdma_mask = ATA_MWDMA2,
88 .udma_mask = ATA_UDMA5,
Alek Du07ab85d2008-05-06 21:31:41 +080089 .port_ops = &sch_pata_ops,
90};
91
92MODULE_AUTHOR("Alek Du <alek.du@intel.com>");
93MODULE_DESCRIPTION("SCSI low-level driver for Intel SCH PATA controllers");
94MODULE_LICENSE("GPL");
95MODULE_DEVICE_TABLE(pci, sch_pci_tbl);
96MODULE_VERSION(DRV_VERSION);
97
98/**
99 * sch_set_piomode - Initialize host controller PATA PIO timings
100 * @ap: Port whose timings we are configuring
101 * @adev: ATA device
102 *
103 * Set PIO mode for device, in host controller PCI config space.
104 *
105 * LOCKING:
106 * None (inherited from caller).
107 */
108
109static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev)
110{
111 unsigned int pio = adev->pio_mode - XFER_PIO_0;
112 struct pci_dev *dev = to_pci_dev(ap->host->dev);
113 unsigned int port = adev->devno ? D1TIM : D0TIM;
114 unsigned int data;
115
116 pci_read_config_dword(dev, port, &data);
117 /* see SCH datasheet page 351 */
118 /* set PIO mode */
119 data &= ~(PM | PPE);
120 data |= pio;
121 /* enable PPE for block device */
122 if (adev->class == ATA_DEV_ATA)
123 data |= PPE;
124 pci_write_config_dword(dev, port, data);
125}
126
127/**
128 * sch_set_dmamode - Initialize host controller PATA DMA timings
129 * @ap: Port whose timings we are configuring
130 * @adev: ATA device
131 *
132 * Set MW/UDMA mode for device, in host controller PCI config space.
133 *
134 * LOCKING:
135 * None (inherited from caller).
136 */
137
138static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev)
139{
140 unsigned int dma_mode = adev->dma_mode;
141 struct pci_dev *dev = to_pci_dev(ap->host->dev);
142 unsigned int port = adev->devno ? D1TIM : D0TIM;
143 unsigned int data;
144
145 pci_read_config_dword(dev, port, &data);
146 /* see SCH datasheet page 351 */
147 if (dma_mode >= XFER_UDMA_0) {
148 /* enable Synchronous DMA mode */
149 data |= USD;
150 data &= ~UDM;
151 data |= (dma_mode - XFER_UDMA_0) << 16;
152 } else { /* must be MWDMA mode, since we masked SWDMA already */
153 data &= ~(USD | MDM);
154 data |= (dma_mode - XFER_MW_DMA_0) << 8;
155 }
156 pci_write_config_dword(dev, port, data);
157}
158
159/**
160 * sch_init_one - Register SCH ATA PCI device with kernel services
161 * @pdev: PCI device to register
162 * @ent: Entry in sch_pci_tbl matching with @pdev
163 *
164 * LOCKING:
165 * Inherited from PCI layer (may sleep).
166 *
167 * RETURNS:
168 * Zero on success, or -ERRNO value.
169 */
170
Greg Kroah-Hartman0ec24912012-12-21 13:19:58 -0800171static int sch_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
Alek Du07ab85d2008-05-06 21:31:41 +0800172{
Alek Du07ab85d2008-05-06 21:31:41 +0800173 const struct ata_port_info *ppi[] = { &sch_port_info, NULL };
Alek Du07ab85d2008-05-06 21:31:41 +0800174
Joe Perches06296a12011-04-15 15:52:00 -0700175 ata_print_version_once(&pdev->dev, DRV_VERSION);
Alek Du07ab85d2008-05-06 21:31:41 +0800176
Tejun Heo1c5afdf2010-05-19 22:10:22 +0200177 return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0);
Alek Du07ab85d2008-05-06 21:31:41 +0800178}
179
Axel Lin2fc75da2012-04-19 13:43:05 +0800180module_pci_driver(sch_pci_driver);