blob: 0fc6ff276221025b4d625674023df67e72589b42 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $
2 *
3 * Linux ISDN subsystem
4 * Definition of the interface between the subsystem and its low-level drivers.
5 *
6 * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
7 * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg
8 *
9 * This software may be used and distributed according to the terms
10 * of the GNU General Public License, incorporated herein by reference.
11 *
12 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070013#ifndef __ISDNIF_H__
14#define __ISDNIF_H__
15
16
Linus Torvalds1da177e2005-04-16 15:20:36 -070017#include <linux/skbuff.h>
David Howells607ca462012-10-13 10:46:48 +010018#include <uapi/linux/isdnif.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070019
20/***************************************************************************/
21/* Extensions made by Werner Cornelius (werner@ikt.de) */
22/* */
23/* The proceed command holds a incoming call in a state to leave processes */
24/* enough time to check whether ist should be accepted. */
25/* The PROT_IO Command extends the interface to make protocol dependent */
26/* features available (call diversion, call waiting...). */
27/* */
28/* The PROT_IO Command is executed with the desired driver id and the arg */
29/* parameter coded as follows: */
30/* The lower 8 bits of arg contain the desired protocol from ISDN_PTYPE */
31/* definitions. The upper 24 bits represent the protocol specific cmd/stat.*/
32/* Any additional data is protocol and command specific. */
33/* This mechanism also applies to the statcallb callback STAT_PROT. */
34/* */
35/* This suggested extension permits an easy expansion of protocol specific */
36/* handling. Extensions may be added at any time without changing the HL */
37/* driver code and not getting conflicts without certifications. */
38/* The well known CAPI 2.0 interface handles such extensions in a similar */
39/* way. Perhaps a protocol specific module may be added and separately */
40/* loaded and linked to the basic isdn module for handling. */
41/***************************************************************************/
42
43/*****************/
44/* DSS1 commands */
45/*****************/
46#define DSS1_CMD_INVOKE ((0x00 << 8) | ISDN_PTYPE_EURO) /* invoke a supplementary service */
47#define DSS1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_EURO) /* abort a invoke cmd */
48
49/*******************************/
50/* DSS1 Status callback values */
51/*******************************/
52#define DSS1_STAT_INVOKE_RES ((0x80 << 8) | ISDN_PTYPE_EURO) /* Result for invocation */
53#define DSS1_STAT_INVOKE_ERR ((0x81 << 8) | ISDN_PTYPE_EURO) /* Error Return for invocation */
54#define DSS1_STAT_INVOKE_BRD ((0x82 << 8) | ISDN_PTYPE_EURO) /* Deliver invoke broadcast info */
55
56
57/*********************************************************************/
58/* structures for DSS1 commands and callback */
59/* */
60/* An action is invoked by sending a DSS1_CMD_INVOKE. The ll_id, proc*/
61/* timeout, datalen and data fields must be set before calling. */
62/* */
63/* The return value is a positive hl_id value also delivered in the */
64/* hl_id field. A value of zero signals no more left hl_id capacitys.*/
65/* A negative return value signals errors in LL. So if the return */
66/* value is <= 0 no action in LL will be taken -> request ignored */
67/* */
68/* The timeout field must be filled with a positive value specifying */
69/* the amount of time the INVOKED process waits for a reaction from */
70/* the network. */
71/* If a response (either error or result) is received during this */
72/* intervall, a reporting callback is initiated and the process will */
73/* be deleted, the hl identifier will be freed. */
74/* If no response is received during the specified intervall, a error*/
75/* callback is initiated with timeout set to -1 and a datalen set */
76/* to 0. */
77/* If timeout is set to a value <= 0 during INVOCATION the process is*/
78/* immediately deleted after sending the data. No callback occurs ! */
79/* */
80/* A currently waiting process may be aborted with INVOKE_ABORT. No */
81/* callback will occur when a process has been aborted. */
82/* */
83/* Broadcast invoke frames from the network are reported via the */
84/* STAT_INVOKE_BRD callback. The ll_id is set to 0, the other fields */
85/* are supplied by the network and not by the HL. */
86/*********************************************************************/
87
88/*****************/
89/* NI1 commands */
90/*****************/
91#define NI1_CMD_INVOKE ((0x00 << 8) | ISDN_PTYPE_NI1) /* invoke a supplementary service */
92#define NI1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_NI1) /* abort a invoke cmd */
93
94/*******************************/
95/* NI1 Status callback values */
96/*******************************/
97#define NI1_STAT_INVOKE_RES ((0x80 << 8) | ISDN_PTYPE_NI1) /* Result for invocation */
98#define NI1_STAT_INVOKE_ERR ((0x81 << 8) | ISDN_PTYPE_NI1) /* Error Return for invocation */
99#define NI1_STAT_INVOKE_BRD ((0x82 << 8) | ISDN_PTYPE_NI1) /* Deliver invoke broadcast info */
100
101typedef struct
102 { ulong ll_id; /* ID supplied by LL when executing */
103 /* a command and returned by HL for */
104 /* INVOKE_RES and INVOKE_ERR */
105 int hl_id; /* ID supplied by HL when called */
106 /* for executing a cmd and delivered */
107 /* for results and errors */
108 /* must be supplied by LL when aborting*/
109 int proc; /* invoke procedure used by CMD_INVOKE */
110 /* returned by callback and broadcast */
111 int timeout; /* timeout for INVOKE CMD in ms */
112 /* -1 in stat callback when timed out */
113 /* error value when error callback */
114 int datalen; /* length of cmd or stat data */
115 u_char *data;/* pointer to data delivered or send */
116 } isdn_cmd_stat;
117
118/*
119 * Commands from linklevel to lowlevel
120 *
121 */
122#define ISDN_CMD_IOCTL 0 /* Perform ioctl */
123#define ISDN_CMD_DIAL 1 /* Dial out */
124#define ISDN_CMD_ACCEPTD 2 /* Accept an incoming call on D-Chan. */
125#define ISDN_CMD_ACCEPTB 3 /* Request B-Channel connect. */
126#define ISDN_CMD_HANGUP 4 /* Hangup */
127#define ISDN_CMD_CLREAZ 5 /* Clear EAZ(s) of channel */
128#define ISDN_CMD_SETEAZ 6 /* Set EAZ(s) of channel */
129#define ISDN_CMD_GETEAZ 7 /* Get EAZ(s) of channel */
130#define ISDN_CMD_SETSIL 8 /* Set Service-Indicator-List of channel */
131#define ISDN_CMD_GETSIL 9 /* Get Service-Indicator-List of channel */
132#define ISDN_CMD_SETL2 10 /* Set B-Chan. Layer2-Parameter */
133#define ISDN_CMD_GETL2 11 /* Get B-Chan. Layer2-Parameter */
134#define ISDN_CMD_SETL3 12 /* Set B-Chan. Layer3-Parameter */
135#define ISDN_CMD_GETL3 13 /* Get B-Chan. Layer3-Parameter */
136// #define ISDN_CMD_LOCK 14 /* Signal usage by upper levels */
137// #define ISDN_CMD_UNLOCK 15 /* Release usage-lock */
138#define ISDN_CMD_SUSPEND 16 /* Suspend connection */
139#define ISDN_CMD_RESUME 17 /* Resume connection */
140#define ISDN_CMD_PROCEED 18 /* Proceed with call establishment */
141#define ISDN_CMD_ALERT 19 /* Alert after Proceeding */
142#define ISDN_CMD_REDIR 20 /* Redir a incoming call */
143#define ISDN_CMD_PROT_IO 21 /* Protocol specific commands */
144#define CAPI_PUT_MESSAGE 22 /* CAPI message send down or up */
145#define ISDN_CMD_FAXCMD 23 /* FAX commands to HL-driver */
146#define ISDN_CMD_AUDIO 24 /* DSP, DTMF, ... settings */
147
148/*
149 * Status-Values delivered from lowlevel to linklevel via
150 * statcallb().
151 *
152 */
153#define ISDN_STAT_STAVAIL 256 /* Raw status-data available */
154#define ISDN_STAT_ICALL 257 /* Incoming call detected */
155#define ISDN_STAT_RUN 258 /* Signal protocol-code is running */
156#define ISDN_STAT_STOP 259 /* Signal halt of protocol-code */
157#define ISDN_STAT_DCONN 260 /* Signal D-Channel connect */
158#define ISDN_STAT_BCONN 261 /* Signal B-Channel connect */
159#define ISDN_STAT_DHUP 262 /* Signal D-Channel disconnect */
160#define ISDN_STAT_BHUP 263 /* Signal B-Channel disconnect */
161#define ISDN_STAT_CINF 264 /* Charge-Info */
162#define ISDN_STAT_LOAD 265 /* Signal new lowlevel-driver is loaded */
163#define ISDN_STAT_UNLOAD 266 /* Signal unload of lowlevel-driver */
164#define ISDN_STAT_BSENT 267 /* Signal packet sent */
165#define ISDN_STAT_NODCH 268 /* Signal no D-Channel */
166#define ISDN_STAT_ADDCH 269 /* Add more Channels */
167#define ISDN_STAT_CAUSE 270 /* Cause-Message */
168#define ISDN_STAT_ICALLW 271 /* Incoming call without B-chan waiting */
169#define ISDN_STAT_REDIR 272 /* Redir result */
170#define ISDN_STAT_PROT 273 /* protocol IO specific callback */
171#define ISDN_STAT_DISPLAY 274 /* deliver a received display message */
172#define ISDN_STAT_L1ERR 275 /* Signal Layer-1 Error */
173#define ISDN_STAT_FAXIND 276 /* FAX indications from HL-driver */
174#define ISDN_STAT_AUDIO 277 /* DTMF, DSP indications */
175#define ISDN_STAT_DISCH 278 /* Disable/Enable channel usage */
176
177/*
178 * Audio commands
179 */
180#define ISDN_AUDIO_SETDD 0 /* Set DTMF detection */
181#define ISDN_AUDIO_DTMF 1 /* Rx/Tx DTMF */
182
183/*
184 * Values for errcode field
185 */
186#define ISDN_STAT_L1ERR_SEND 1
187#define ISDN_STAT_L1ERR_RECV 2
188
189/*
190 * Values for feature-field of interface-struct.
191 */
192/* Layer 2 */
193#define ISDN_FEATURE_L2_X75I (0x0001 << ISDN_PROTO_L2_X75I)
194#define ISDN_FEATURE_L2_X75UI (0x0001 << ISDN_PROTO_L2_X75UI)
195#define ISDN_FEATURE_L2_X75BUI (0x0001 << ISDN_PROTO_L2_X75BUI)
196#define ISDN_FEATURE_L2_HDLC (0x0001 << ISDN_PROTO_L2_HDLC)
197#define ISDN_FEATURE_L2_TRANS (0x0001 << ISDN_PROTO_L2_TRANS)
198#define ISDN_FEATURE_L2_X25DTE (0x0001 << ISDN_PROTO_L2_X25DTE)
199#define ISDN_FEATURE_L2_X25DCE (0x0001 << ISDN_PROTO_L2_X25DCE)
200#define ISDN_FEATURE_L2_V11096 (0x0001 << ISDN_PROTO_L2_V11096)
201#define ISDN_FEATURE_L2_V11019 (0x0001 << ISDN_PROTO_L2_V11019)
202#define ISDN_FEATURE_L2_V11038 (0x0001 << ISDN_PROTO_L2_V11038)
203#define ISDN_FEATURE_L2_MODEM (0x0001 << ISDN_PROTO_L2_MODEM)
204#define ISDN_FEATURE_L2_FAX (0x0001 << ISDN_PROTO_L2_FAX)
205#define ISDN_FEATURE_L2_HDLC_56K (0x0001 << ISDN_PROTO_L2_HDLC_56K)
206
207#define ISDN_FEATURE_L2_MASK (0x0FFFF) /* Max. 16 protocols */
208#define ISDN_FEATURE_L2_SHIFT (0)
209
210/* Layer 3 */
211#define ISDN_FEATURE_L3_TRANS (0x10000 << ISDN_PROTO_L3_TRANS)
212#define ISDN_FEATURE_L3_TRANSDSP (0x10000 << ISDN_PROTO_L3_TRANSDSP)
213#define ISDN_FEATURE_L3_FCLASS2 (0x10000 << ISDN_PROTO_L3_FCLASS2)
214#define ISDN_FEATURE_L3_FCLASS1 (0x10000 << ISDN_PROTO_L3_FCLASS1)
215
216#define ISDN_FEATURE_L3_MASK (0x0FF0000) /* Max. 8 Protocols */
217#define ISDN_FEATURE_L3_SHIFT (16)
218
219/* Signaling */
220#define ISDN_FEATURE_P_UNKNOWN (0x1000000 << ISDN_PTYPE_UNKNOWN)
221#define ISDN_FEATURE_P_1TR6 (0x1000000 << ISDN_PTYPE_1TR6)
222#define ISDN_FEATURE_P_EURO (0x1000000 << ISDN_PTYPE_EURO)
223#define ISDN_FEATURE_P_NI1 (0x1000000 << ISDN_PTYPE_NI1)
224
225#define ISDN_FEATURE_P_MASK (0x0FF000000) /* Max. 8 Protocols */
226#define ISDN_FEATURE_P_SHIFT (24)
227
228typedef struct setup_parm {
229 unsigned char phone[32]; /* Remote Phone-Number */
230 unsigned char eazmsn[32]; /* Local EAZ or MSN */
231 unsigned char si1; /* Service Indicator 1 */
232 unsigned char si2; /* Service Indicator 2 */
233 unsigned char plan; /* Numbering plan */
234 unsigned char screen; /* Screening info */
235} setup_parm;
236
237
238#ifdef CONFIG_ISDN_TTY_FAX
239/* T.30 Fax G3 */
240
241#define FAXIDLEN 21
242
243typedef struct T30_s {
244 /* session parameters */
Jan Blunck6a878182006-01-08 01:05:07 -0800245 __u8 resolution;
246 __u8 rate;
247 __u8 width;
248 __u8 length;
249 __u8 compression;
250 __u8 ecm;
251 __u8 binary;
252 __u8 scantime;
253 __u8 id[FAXIDLEN];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700254 /* additional parameters */
Jan Blunck6a878182006-01-08 01:05:07 -0800255 __u8 phase;
256 __u8 direction;
257 __u8 code;
258 __u8 badlin;
259 __u8 badmul;
260 __u8 bor;
261 __u8 fet;
262 __u8 pollid[FAXIDLEN];
263 __u8 cq;
264 __u8 cr;
265 __u8 ctcrty;
266 __u8 minsp;
267 __u8 phcto;
268 __u8 rel;
269 __u8 nbc;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700270 /* remote station parameters */
Jan Blunck6a878182006-01-08 01:05:07 -0800271 __u8 r_resolution;
272 __u8 r_rate;
273 __u8 r_width;
274 __u8 r_length;
275 __u8 r_compression;
276 __u8 r_ecm;
277 __u8 r_binary;
278 __u8 r_scantime;
279 __u8 r_id[FAXIDLEN];
280 __u8 r_code;
Eric Dumazetbc105022010-06-03 03:21:52 -0700281} __packed T30_s;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700282
283#define ISDN_TTY_FAX_CONN_IN 0
284#define ISDN_TTY_FAX_CONN_OUT 1
285
286#define ISDN_TTY_FAX_FCON 0
287#define ISDN_TTY_FAX_DIS 1
288#define ISDN_TTY_FAX_FTT 2
289#define ISDN_TTY_FAX_MCF 3
290#define ISDN_TTY_FAX_DCS 4
291#define ISDN_TTY_FAX_TRAIN_OK 5
292#define ISDN_TTY_FAX_EOP 6
293#define ISDN_TTY_FAX_EOM 7
294#define ISDN_TTY_FAX_MPS 8
295#define ISDN_TTY_FAX_DTC 9
296#define ISDN_TTY_FAX_RID 10
297#define ISDN_TTY_FAX_HNG 11
298#define ISDN_TTY_FAX_DT 12
299#define ISDN_TTY_FAX_FCON_I 13
300#define ISDN_TTY_FAX_DR 14
301#define ISDN_TTY_FAX_ET 15
302#define ISDN_TTY_FAX_CFR 16
303#define ISDN_TTY_FAX_PTS 17
304#define ISDN_TTY_FAX_SENT 18
305
306#define ISDN_FAX_PHASE_IDLE 0
307#define ISDN_FAX_PHASE_A 1
308#define ISDN_FAX_PHASE_B 2
309#define ISDN_FAX_PHASE_C 3
310#define ISDN_FAX_PHASE_D 4
311#define ISDN_FAX_PHASE_E 5
312
313#endif /* TTY_FAX */
314
315#define ISDN_FAX_CLASS1_FAE 0
316#define ISDN_FAX_CLASS1_FTS 1
317#define ISDN_FAX_CLASS1_FRS 2
318#define ISDN_FAX_CLASS1_FTM 3
319#define ISDN_FAX_CLASS1_FRM 4
320#define ISDN_FAX_CLASS1_FTH 5
321#define ISDN_FAX_CLASS1_FRH 6
322#define ISDN_FAX_CLASS1_CTRL 7
323
324#define ISDN_FAX_CLASS1_OK 0
325#define ISDN_FAX_CLASS1_CONNECT 1
326#define ISDN_FAX_CLASS1_NOCARR 2
327#define ISDN_FAX_CLASS1_ERROR 3
328#define ISDN_FAX_CLASS1_FCERROR 4
329#define ISDN_FAX_CLASS1_QUERY 5
330
331typedef struct {
332 __u8 cmd;
333 __u8 subcmd;
334 __u8 para[50];
335} aux_s;
336
337#define AT_COMMAND 0
338#define AT_EQ_VALUE 1
339#define AT_QUERY 2
340#define AT_EQ_QUERY 3
341
342/* CAPI structs */
343
344/* this is compatible to the old union size */
345#define MAX_CAPI_PARA_LEN 50
346
347typedef struct {
348 /* Header */
349 __u16 Length;
350 __u16 ApplId;
351 __u8 Command;
352 __u8 Subcommand;
353 __u16 Messagenumber;
354
355 /* Parameter */
356 union {
357 __u32 Controller;
358 __u32 PLCI;
359 __u32 NCCI;
360 } adr;
361 __u8 para[MAX_CAPI_PARA_LEN];
362} capi_msg;
363
364/*
365 * Structure for exchanging above infos
366 *
367 */
368typedef struct {
369 int driver; /* Lowlevel-Driver-ID */
370 int command; /* Command or Status (see above) */
371 ulong arg; /* Additional Data */
372 union {
373 ulong errcode; /* Type of error with STAT_L1ERR */
374 int length; /* Amount of bytes sent with STAT_BSENT */
375 u_char num[50]; /* Additional Data */
376 setup_parm setup;/* For SETUP msg */
377 capi_msg cmsg; /* For CAPI like messages */
378 char display[85];/* display message data */
379 isdn_cmd_stat isdn_io; /* ISDN IO-parameter/result */
380 aux_s aux; /* for modem commands/indications */
381#ifdef CONFIG_ISDN_TTY_FAX
382 T30_s *fax; /* Pointer to ttys fax struct */
383#endif
384 ulong userdata; /* User Data */
385 } parm;
386} isdn_ctrl;
387
388#define dss1_io isdn_io
389#define ni1_io isdn_io
390
391/*
392 * The interface-struct itself (initialized at load-time of lowlevel-driver)
393 *
394 * See Documentation/isdn/INTERFACE for a description, how the communication
395 * between the ISDN subsystem and its drivers is done.
396 *
397 */
398typedef struct {
399 struct module *owner;
400
401 /* Number of channels supported by this driver
402 */
403 int channels;
404
405 /*
406 * Maximum Size of transmit/receive-buffer this driver supports.
407 */
408 int maxbufsize;
409
410 /* Feature-Flags for this driver.
411 * See defines ISDN_FEATURE_... for Values
412 */
413 unsigned long features;
414
415 /*
416 * Needed for calculating
417 * dev->hard_header_len = linklayer header + hl_hdrlen;
418 * Drivers, not supporting sk_buff's should set this to 0.
419 */
420 unsigned short hl_hdrlen;
421
422 /*
423 * Receive-Callback using sk_buff's
424 * Parameters:
425 * int Driver-ID
426 * int local channel-number (0 ...)
427 * struct sk_buff *skb received Data
428 */
429 void (*rcvcallb_skb)(int, int, struct sk_buff *);
430
431 /* Status-Callback
432 * Parameters:
433 * isdn_ctrl*
434 * driver = Driver ID.
435 * command = One of above ISDN_STAT_... constants.
436 * arg = depending on status-type.
437 * num = depending on status-type.
438 */
439 int (*statcallb)(isdn_ctrl*);
440
441 /* Send command
442 * Parameters:
443 * isdn_ctrl*
444 * driver = Driver ID.
445 * command = One of above ISDN_CMD_... constants.
446 * arg = depending on command.
447 * num = depending on command.
448 */
449 int (*command)(isdn_ctrl*);
450
451 /*
452 * Send data using sk_buff's
453 * Parameters:
454 * int driverId
455 * int local channel-number (0...)
456 * int Flag: Need ACK for this packet.
457 * struct sk_buff *skb Data to send
458 */
459 int (*writebuf_skb) (int, int, int, struct sk_buff *);
460
461 /* Send raw D-Channel-Commands
462 * Parameters:
463 * u_char pointer data
464 * int length of data
465 * int driverId
466 * int local channel-number (0 ...)
467 */
468 int (*writecmd)(const u_char __user *, int, int, int);
469
470 /* Read raw Status replies
471 * u_char pointer data (volatile)
472 * int length of buffer
473 * int driverId
474 * int local channel-number (0 ...)
475 */
476 int (*readstat)(u_char __user *, int, int, int);
477
478 char id[20];
479} isdn_if;
480
481/*
482 * Function which must be called by lowlevel-driver at loadtime with
483 * the following fields of above struct set:
484 *
485 * channels Number of channels that will be supported.
486 * hl_hdrlen Space to preserve in sk_buff's when sending. Drivers, not
487 * supporting sk_buff's should set this to 0.
488 * command Address of Command-Handler.
489 * features Bitwise coded Features of this driver. (use ISDN_FEATURE_...)
490 * writebuf_skb Address of Skbuff-Send-Handler.
491 * writecmd " " D-Channel " which accepts raw D-Ch-Commands.
492 * readstat " " D-Channel " which delivers raw Status-Data.
493 *
494 * The linklevel-driver fills the following fields:
495 *
496 * channels Driver-ID assigned to this driver. (Must be used on all
497 * subsequent callbacks.
498 * rcvcallb_skb Address of handler for received Skbuff's.
499 * statcallb " " " for status-changes.
500 *
501 */
502extern int register_isdn(isdn_if*);
503#include <asm/uaccess.h>
504
Linus Torvalds1da177e2005-04-16 15:20:36 -0700505#endif /* __ISDNIF_H__ */