blob: 8706cd66ca1fcf20e9b17140723eaad16a99c592 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001Note these changes relate to Hannu's code and don't include the changes
2made outside of this for modularising the sound
3
4Changelog for version 3.8o
5--------------------------
6
7Since 3.8h
8- Included support for OPL3-SA1 and SoftOSS
9
10Since 3.8
11- Fixed SNDCTL_DSP_GETOSPACE
12- Compatibility fixes for Linux 2.1.47
13
14Since 3.8-beta21
15- Fixed all known bugs (I think).
16
17Since 3.8-beta8
18- Lot of fixes to audio playback code in dmabuf.c
19
20Since 3.8-beta6
21- Fixed the famous Quake delay bug.
22
23Since 3.8-beta5
24- Fixed many bugs in audio playback.
25
26Since 3.8-beta4
27- Just minor changes.
28
29Since 3.8-beta1
30- Major rewrite of audio playback handling.
31- Added AWE32 support by Takashi Iwai (in ./lowlevel/).
32
33Since 3.7-beta#
34- Passing of ioctl() parameters between soundcard.c and other modules has been
35changed so that arg always points to kernel space.
36- Some bugfixes.
37
38Since 3.7-beta5
39- Disabled MIDI input with GUS PnP (Interwave). There seems to be constant
40stream of received 0x00 bytes when the MIDI receiver is enabled.
41
42Since 3.5
43- Changes almost everywhere.
44- Support for OPTi 82C924-based sound cards.
45
46Since 3.5.4-beta8
47- Fixed a bug in handling of non-fragment sized writes in 16 bit/stereo mode
48 with GUS.
49- Limited minimum fragment size with some audio devices (GUS=512 and
50 SB=32). These devices require more time to "recover" from processing
51 of each fragment.
52
53Since 3.5.4-beta6/7
54- There seems to be problems in the OPTi 82C930 so cards based on this
55 chip don't necessarily work yet. There are problems in detecting the
56 MIDI interface. Also mixer volumes may be seriously wrong on some systems.
57 You can safely use this driver version with C930 if it looks to work.
58 However please don't complain if you have problems with it. C930 support
59 should be fixed in future releases.
60- Got initialization of GUS PnP to work. With this version GUS PnP should
61 work in GUS compatible mode after initialization using isapnptools.
62- Fixed a bug in handling of full duplex cards in write only mode. This has
63 been causing "audio device opening" errors with RealAudio player.
64
65Since 3.5.4.beta5
66- Changes to OPTi 82C930 driver.
67- Major changes to the Soundscape driver. The driver requires now just one
68 DMA channel. The extra audio/dsp device (the "Not functional" one) used
69 for code download in the earlier versions has been eliminated. There is now
70 just one /dev/dsp# device which is used both for code download and audio.
71
72Since 3.5.4.beta4
73- Minor changes.
74
75Since 3.5.4-beta2
76- Fixed silent playback with ESS 688/1688.
77- Got SB16 to work without the 16 bit DMA channel (only the 8 bit one
78 is required for 8 and 16 bit modes).
79- Added the "lowlevel" subdirectory for additional low level drivers that
80 are not part of USS core. See lowlevel/README for more info.
81- Included support for ACI mixer (by Markus Kuhn). ACI is a mixer used in
82 miroPCM sound cards. See lowlevel/aci.readme for more info.
83- Support for Aztech Washington chipset (AZT2316 ASIC).
84
85Since 3.5.4-beta1
86- Reduced clicking with AD1848.
87- Support for OPTi 82C930. Only half duplex at this time. 16 bit playback
88 is sometimes just white noise (occurs randomly).
89
90Since 3.5.2
91- Major changes to the SB/Jazz16/ESS driver (most parts rewritten).
92 The most noticeable new feature is support for multiple SB cards at the same
93 time.
94- Renamed sb16_midi.c to uart401.c. Also modified it to work also with
95 other MPU401 UART compatible cards than SB16/ESS/Jazz.
96- Some changes which reduce clicking in audio playback.
97- Copying policy is now GPL.
98
99Since 3.5.1
100- TB Maui initialization support
101Since 3.5
102- Improved handling of playback underrun situations.
103
104Since 3.5-beta10
105- Bug fixing
106
107Since 3.5-beta9
108- Fixed for compatibility with Linux 1.3.70 and later.
109- Changed boot time passing of 16 bit DMA channel number to SB driver.
110
111Since 3.5-beta8
112- Minor changes
113
114Since 3.5-beta7
115- enhancements to configure program (by Jeff Tranter):
116 - prompts are in same format as 1.3.x Linux kernel config program
117 - on-line help for each question
118 - fixed some compile warnings detected by gcc/g++ -Wall
119 - minor grammatical changes to prompts
120
121Since 3.5-beta6
122- Fixed bugs in mmap() support.
123- Minor changes to Maui driver.
124
125Since 3.5-beta5
126- Fixed crash after recording with ESS688. It's generally a good
127 idea to stop inbound DMA transfers before freeing the memory
128 buffer.
129- Fixed handling of AD1845 codec (for example Shuttle Sound System).
130- Few other fixes.
131
132Since 3.5-beta4
133- Fixed bug in handling of uninitialized instruments with GUS.
134
135Since 3.5-beta3
136- Few changes which decrease popping at end/beginning of audio playback.
137
138Since 3.5-beta2
139- Removed MAD16+CS4231 hack made in previous version since it didn't
140 help.
141- Fixed the above bug in proper way and in proper place. Many thanks
142 to James Hightower.
143
144Since 3.5-beta1
145- Bug fixes.
146- Full duplex audio with MAD16+CS4231 may work now. The driver configures
147 SB DMA of MAD16 so that it doesn't conflict with codec's DMA channels.
148 The side effect is that all 8 bit DMA channels (0,1,3) are populated in
149 duplex mode.
150
151Since 3.5-alpha9
152- Bug fixes (mostly in Jazz16 and ESS1688/688 supports).
153- Temporarily disabled recording with ESS1688/688 since it causes crash.
154- Changed audio buffer partitioning algorithm so that it selects
155 smaller fragment size than earlier. This improves real time capabilities
156 of the driver and makes recording to disk to work better. Unfortunately
157 this change breaks some programs which assume that fragments cannot be
158 shorter than 4096 bytes.
159
160Since 3.5-alpha8
161- Bug fixes
162
163Since 3.5-alpha7
164- Linux kernel compatible configuration (_EXPERIMENTAL_). Enable
165 using command "cd /linux/drivers/sound;make script" and then
166 just run kernel's make config normally.
167- Minor fixes to the SB support. Hopefully the driver works with
168 all SB models now.
169- Added support for ESS ES1688 "AudioDrive" based cards.
170
171Since 3.5-alpha6
172- SB Pro and SB16 supports are no longer separately selectable options.
173 Enabling SB enables them too.
174- Changed all #ifndef EXCLUDE_xx stuff to #ifdef CONFIG_xx. Modified
175configure to handle this.
176- Removed initialization messages from the
177modularized version. They can be enabled by using init_trace=1 in
178the insmod command line (insmod sound init_trace=1).
179- More AIX stuff.
180- Added support for synchronizing dsp/audio devices with /dev/sequencer.
181- mmap() support for dsp/audio devices.
182
183Since 3.5-alpha5
184- AIX port.
185- Changed some xxx_PATCH macros in soundcard.h to work with
186 big endian machines.
187
188Since 3.5-alpha4
189- Removed the 'setfx' stuff from the version distributed with kernel
190 sources. Running 'setfx' is required again.
191
192Since 3.5-alpha3
193- Moved stuff from the 'setfx' program to the AudioTrix Pro driver.
194
195Since 3.5-alpha2
196- Modifications to makefile and configure.c. Unnecessary sources
197 are no longer compiled. Newly created local.h is also copied to
198 /etc/soundconf. "make oldconfig" reads /etc/soundconf and produces
199 new local.h which is compatible with current version of the driver.
200- Some fixes to the SB16 support.
201- Fixed random protection fault in gus_wave.c
202
203Since 3.5-alpha1
204- Modified to work with Linux-1.3.33 and later
205- Some minor changes
206
207Since 3.0.2
208- Support for CS4232 based PnP cards (AcerMagic S23 etc).
209- Full duplex support for some CS4231, CS4232 and AD1845 based cards
210(GUS MAX, AudioTrix Pro, AcerMagic S23 and many MAD16/Mozart cards
211having a codec mentioned above).
212- Almost fully rewritten loadable modules support.
213- Fixed some bugs.
214- Huge amount of testing (more testing is still required).
215- mmap() support (works with some cards). Requires much more testing.
216- Sample/patch/program loading for TB Maui/Tropez. No initialization
217since TB doesn't allow me to release that code.
218- Using CS4231 compatible codecs as timer for /dev/music.
219
220Since 3.0.1
221- Added allocation of I/O ports, DMA channels and interrupts
222to the initialization code. This may break modules support since
223the driver may not free some resources on unload. Should be fixed soon.
224
225Since 3.0
226- Some important bug fixes.
227- select() for /dev/dsp and /dev/audio (Linux only).
228(To use select() with read, you have to call read() to start
229the recording. Calling write() kills recording immediately so
230use select() carefully when you are writing a half duplex app.
231Full duplex mode is not implemented yet.) Select works also with
232/dev/sequencer and /dev/music. Maybe with /dev/midi## too.
233
234Since 3.0-beta2
235- Minor fixes.
236- Added Readme.cards
237
238Since 3.0-beta1
239- Minor fixes to the modules support.
240- Eliminated call to sb_free_irq() in ad1848.c
241- Rewritten MAD16&Mozart support (not tested with MAD16 Pro).
242- Fix to DMA initialization of PSS cards.
243- Some fixes to ad1848/cs42xx mixer support (GUS MAX, MSS, etc.)
244- Fixed some bugs in the PSS driver which caused I/O errors with
245 the MSS mode (/dev/dsp).
246
247Since 3.0-950506
248- Recording with GUS MAX fixed. It works when the driver is configured
249 to use two DMA channels with GUS MAX (16 bit ones recommended).
250
251Since 3.0-94xxxx
252- Too many changes
253
254Since 3.0-940818
255- Fixes for Linux 1.1.4x.
256- Disables Disney Sound System with SG NX Pro 16 (less noise).
257
258Since 2.90-2
259- Fixes to soundcard.h
260- Non blocking mode to /dev/sequencer
261- Experimental detection code for Ensoniq Soundscape.
262
263Since 2.90
264- Minor and major bug fixes
265
266Since pre-3.0-940712
267- GUS MAX support
268- Partially working MSS/WSS support (could work with some cards).
269- Hardware u-Law and A-Law support with AD1848/CS4248 and CS4231 codecs
270 (GUS MAX, GUS16, WSS etc). Hardware ADPCM is possible with GUS16 and
271 GUS MAX, but it doesn't work yet.
272Since pre-3.0-940426
273- AD1848/CS4248/CS4231 codec support (MSS, GUS MAX, Aztec, Orchid etc).
274This codec chip is used in various sound cards. This version is developed
275for the 16 bit daughtercard of GUS. It should work with other cards also
276if the following requirements are met:
277 - The I/O, IRQ and DMA settings are jumper selectable or
278 the card is initialized by booting DOS before booting Linux (etc.).
279 - You add the IO, IRQ and DMA settings manually to the local.h.
280 (Just define GUS16_BASE, GUS16_IRQ and GUS16_DMA). Note that
281 the base address bust be the base address of the codec chip not the
282 card itself. For the GUS16 these are the same but most MSS compatible
283 cards have the codec located at card_base+4.
284- Some minor changes
285
286Since 2.5 (******* MAJOR REWRITE ***********)
287
288This version is based on v2.3. I have tried to maintain two versions
289together so that this one should have the same features than v2.5.
290Something may still be missing. If you notice such things, please let me
291know.
292
293The Readme.v30 contains more details.
294
295- /dev/midi## devices.
296- /dev/sequencer2
297
298Since 2.5-beta2
299- Some fine tuning to the GUS v3.7 mixer code.
300- Fixed speed limits for the plain SB (1.0 to 2.0).
301
302Since 2.5-beta
303- Fixed OPL-3 detection with SB. Caused problems with PAS16.
304- GUS v3.7 mixer support.
305
306Since 2.4
307- Mixer support for Sound Galaxy NX Pro (define __SGNXPRO__ on your local.h).
308- Fixed truncated sound on /dev/dsp when the device is closed.
309- Linear volume mode for GUS
310- Pitch bends larger than +/- 2 octaves.
311- MIDI recording for SB and SB Pro. (Untested).
312- Some other fixes.
313- SB16 MIDI and DSP drivers only initialized if SB16 actually installed.
314- Implemented better detection for OPL-3. This should be useful if you
315 have an old SB Pro (the non-OPL-3 one) or a SB 2.0 clone which has a OPL-3.
316- SVR4.2 support by Ian Hartas. Initial ALPHA TEST version (untested).
317
318Since 2.3b
319- Fixed bug which made it impossible to make long recordings to disk.
320 Recording was not restarted after a buffer overflow situation.
321- Limited mixer support for GUS.
322- Numerous improvements to the GUS driver by Andrew Robinson. Including
323 some click removal etc.
324
325Since 2.3
326- Fixed some minor bugs in the SB16 driver.
327
328Since 2.2b
329- Full SB16 DSP support. 8/16 bit, mono/stereo
330- The SCO and FreeBSD versions should be in sync now. There are some
331 problems with SB16 and GUS in the FreeBSD versions.
332 The DMA buffer allocation of the SCO version has been polished but
333 there could still be some problems. At least it hogs memory.
334 The DMA channel
335 configuration method used in the SCO/System is a hack.
336- Support for the MPU emulation of the SB16.
337- Some big arrays are now allocated boot time. This makes the BSS segment
338 smaller which makes it possible to use the full driver with
339 NetBSD. These arrays are not allocated if no suitable sound card is available.
340- Fixed a bug in the compute_and_set_volume in gus_wave.c
341- Fixed the too fast mono playback problem of SB Pro and PAS16.
342
343Since 2.2
344- Stereo recording for SB Pro. Somehow it was missing and nobody
345 had noticed it earlier.
346- Minor polishing.
347- Interpreting of boot time arguments (sound=) for Linux.
348- Breakup of sb_dsp.c. Parts of the code has been moved to
349 sb_mixer.c and sb_midi.c
350
351Since 2.1
352- Preliminary support for SB16.
353 - The SB16 mixer is supported in its native mode.
354 - Digitized voice capability up to 44.1 kHz/8 bit/mono
355 (16 bit and stereo support coming in the next release).
356- Fixed some bugs in the digitized voice driver for PAS16.
357- Proper initialization of the SB emulation of latest PAS16 models.
358
359- Significantly improved /dev/dsp and /dev/audio support.
360 - Now supports half duplex mode. It's now possible to record and
361 playback without closing and reopening the device.
362 - It's possible to use smaller buffers than earlier. There is a new
363 ioctl(fd, SNDCTL_DSP_SUBDIVIDE, &n) where n should be 1, 2 or 4.
364 This call instructs the driver to use smaller buffers. The default
365 buffer size (0.5 to 1.0 seconds) is divided by n. Should be called
366 immediately after opening the device.
367
368Since 2.0
369Just cosmetic changes.