blob: dfd9c65996c00e3e6fa1578a66d923d263914c5e [file] [log] [blame]
Guenter Roeck44f5a402010-06-28 14:29:03 -07001Kernel driver pmbus
2====================
3
4Supported chips:
Guenter Roeck443830f2011-10-01 17:35:44 -07005 * Ericsson BMR453, BMR454
6 Prefixes: 'bmr453', 'bmr454'
Guenter Roeck44f5a402010-06-28 14:29:03 -07007 Addresses scanned: -
8 Datasheet:
9 http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146395
Guenter Roecke0455e32011-06-25 15:13:44 -070010 * ON Semiconductor ADP4000, NCP4200, NCP4208
11 Prefixes: 'adp4000', 'ncp4200', 'ncp4208'
12 Addresses scanned: -
13 Datasheets:
14 http://www.onsemi.com/pub_link/Collateral/ADP4000-D.PDF
15 http://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF
16 http://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF
Guenter Roeckbc365a72011-09-15 10:43:40 -070017 * Lineage Power
Guenter Roeck21633402012-02-28 11:00:54 -080018 Prefixes: 'mdt040', 'pdt003', 'pdt006', 'pdt012', 'udt020'
Guenter Roeckbc365a72011-09-15 10:43:40 -070019 Addresses scanned: -
20 Datasheets:
21 http://www.lineagepower.com/oem/pdf/PDT003A0X.pdf
22 http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf
23 http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf
24 http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf
Guenter Roeck21633402012-02-28 11:00:54 -080025 http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf
Guenter Roeckcfca3782015-08-07 20:55:59 -070026 * Texas Instruments TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25
27 Prefixes: 'tps40400', 'tps544b20', 'tps544b25', 'tps544c20', 'tps544c25'
Guenter Roeckc5f35c92012-02-28 10:24:54 -080028 Addresses scanned: -
29 Datasheets:
30 http://www.ti.com/lit/gpn/tps40400
Guenter Roeckcfca3782015-08-07 20:55:59 -070031 http://www.ti.com/lit/gpn/tps544b20
32 http://www.ti.com/lit/gpn/tps544b25
33 http://www.ti.com/lit/gpn/tps544c20
34 http://www.ti.com/lit/gpn/tps544c25
Guenter Roeck44f5a402010-06-28 14:29:03 -070035 * Generic PMBus devices
36 Prefix: 'pmbus'
37 Addresses scanned: -
38 Datasheet: n.a.
39
Guenter Roecke3333e52013-02-20 20:58:42 -080040Author: Guenter Roeck <linux@roeck-us.net>
Guenter Roeck44f5a402010-06-28 14:29:03 -070041
42
43Description
44-----------
45
Masanari Iida92417da2016-02-28 12:57:57 +090046This driver supports hardware monitoring for various PMBus compliant devices.
Guenter Roeck44f5a402010-06-28 14:29:03 -070047It supports voltage, current, power, and temperature sensors as supported
48by the device.
49
50Each monitored channel has its own high and low limits, plus a critical
51limit.
52
53Fan support will be added in a later version of this driver.
54
55
56Usage Notes
57-----------
58
59This driver does not probe for PMBus devices, since there is no register
60which can be safely used to identify the chip (The MFG_ID register is not
61supported by all chips), and since there is no well defined address range for
62PMBus devices. You will have to instantiate the devices explicitly.
63
64Example: the following will load the driver for an LTC2978 at address 0x60
65on I2C bus #1:
66$ modprobe pmbus
67$ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
68
69
70Platform data support
71---------------------
72
73Support for additional PMBus chips can be added by defining chip parameters in
74a new chip specific driver file. For example, (untested) code to add support for
75Emerson DS1200 power modules might look as follows.
76
77static struct pmbus_driver_info ds1200_info = {
78 .pages = 1,
79 /* Note: All other sensors are in linear mode */
80 .direct[PSC_VOLTAGE_OUT] = true,
81 .direct[PSC_TEMPERATURE] = true,
82 .direct[PSC_CURRENT_OUT] = true,
83 .m[PSC_VOLTAGE_IN] = 1,
84 .b[PSC_VOLTAGE_IN] = 0,
85 .R[PSC_VOLTAGE_IN] = 3,
86 .m[PSC_VOLTAGE_OUT] = 1,
87 .b[PSC_VOLTAGE_OUT] = 0,
88 .R[PSC_VOLTAGE_OUT] = 3,
89 .m[PSC_TEMPERATURE] = 1,
90 .b[PSC_TEMPERATURE] = 0,
91 .R[PSC_TEMPERATURE] = 3,
92 .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT
93 | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
94 | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
95 | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
96 | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
97 | PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
98};
99
100static int ds1200_probe(struct i2c_client *client,
101 const struct i2c_device_id *id)
102{
103 return pmbus_do_probe(client, id, &ds1200_info);
104}
105
106static int ds1200_remove(struct i2c_client *client)
107{
108 return pmbus_do_remove(client);
109}
110
111static const struct i2c_device_id ds1200_id[] = {
112 {"ds1200", 0},
113 {}
114};
115
116MODULE_DEVICE_TABLE(i2c, ds1200_id);
117
118/* This is the driver that will be inserted */
119static struct i2c_driver ds1200_driver = {
120 .driver = {
121 .name = "ds1200",
122 },
123 .probe = ds1200_probe,
124 .remove = ds1200_remove,
125 .id_table = ds1200_id,
126};
127
128static int __init ds1200_init(void)
129{
130 return i2c_add_driver(&ds1200_driver);
131}
132
133static void __exit ds1200_exit(void)
134{
135 i2c_del_driver(&ds1200_driver);
136}
137
138
139Sysfs entries
140-------------
141
142When probing the chip, the driver identifies which PMBus registers are
143supported, and determines available sensors from this information.
Masanari Iida02582e92012-08-22 19:11:26 +0900144Attribute files only exist if respective sensors are supported by the chip.
Guenter Roeck44f5a402010-06-28 14:29:03 -0700145Labels are provided to inform the user about the sensor associated with
146a given sysfs entry.
147
148The following attributes are supported. Limits are read-write; all other
149attributes are read-only.
150
151inX_input Measured voltage. From READ_VIN or READ_VOUT register.
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300152inX_min Minimum Voltage.
Guenter Roeck44f5a402010-06-28 14:29:03 -0700153 From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register.
154inX_max Maximum voltage.
155 From VIN_OV_WARN_LIMIT or VOUT_OV_WARN_LIMIT register.
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300156inX_lcrit Critical minimum Voltage.
Guenter Roeck44f5a402010-06-28 14:29:03 -0700157 From VIN_UV_FAULT_LIMIT or VOUT_UV_FAULT_LIMIT register.
158inX_crit Critical maximum voltage.
159 From VIN_OV_FAULT_LIMIT or VOUT_OV_FAULT_LIMIT register.
160inX_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
161inX_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
162inX_lcrit_alarm Voltage critical low alarm.
163 From VOLTAGE_UV_FAULT status.
164inX_crit_alarm Voltage critical high alarm.
165 From VOLTAGE_OV_FAULT status.
166inX_label "vin", "vcap", or "voutY"
167
168currX_input Measured current. From READ_IIN or READ_IOUT register.
169currX_max Maximum current.
170 From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT register.
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300171currX_lcrit Critical minimum output current.
Guenter Roeck44f5a402010-06-28 14:29:03 -0700172 From IOUT_UC_FAULT_LIMIT register.
173currX_crit Critical maximum current.
174 From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register.
175currX_alarm Current high alarm.
176 From IIN_OC_WARNING or IOUT_OC_WARNING status.
Guenter Roeck180b3d82011-04-18 09:48:58 -0700177currX_max_alarm Current high alarm.
178 From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status.
Guenter Roeck44f5a402010-06-28 14:29:03 -0700179currX_lcrit_alarm Output current critical low alarm.
180 From IOUT_UC_FAULT status.
181currX_crit_alarm Current critical high alarm.
182 From IIN_OC_FAULT or IOUT_OC_FAULT status.
Guenter Roeck180b3d82011-04-18 09:48:58 -0700183currX_label "iin" or "ioutY"
Guenter Roeck44f5a402010-06-28 14:29:03 -0700184
185powerX_input Measured power. From READ_PIN or READ_POUT register.
186powerX_cap Output power cap. From POUT_MAX register.
187powerX_max Power limit. From PIN_OP_WARN_LIMIT or
188 POUT_OP_WARN_LIMIT register.
189powerX_crit Critical output power limit.
190 From POUT_OP_FAULT_LIMIT register.
191powerX_alarm Power high alarm.
192 From PIN_OP_WARNING or POUT_OP_WARNING status.
193powerX_crit_alarm Output power critical high alarm.
194 From POUT_OP_FAULT status.
195powerX_label "pin" or "poutY"
196
Guenter Roeck180b3d82011-04-18 09:48:58 -0700197tempX_input Measured temperature.
Guenter Roeck44f5a402010-06-28 14:29:03 -0700198 From READ_TEMPERATURE_X register.
Guenter Roeck180b3d82011-04-18 09:48:58 -0700199tempX_min Mimimum temperature. From UT_WARN_LIMIT register.
200tempX_max Maximum temperature. From OT_WARN_LIMIT register.
201tempX_lcrit Critical low temperature.
Guenter Roeck44f5a402010-06-28 14:29:03 -0700202 From UT_FAULT_LIMIT register.
Guenter Roeck180b3d82011-04-18 09:48:58 -0700203tempX_crit Critical high temperature.
Guenter Roeck44f5a402010-06-28 14:29:03 -0700204 From OT_FAULT_LIMIT register.
205tempX_min_alarm Chip temperature low alarm. Set by comparing
206 READ_TEMPERATURE_X with UT_WARN_LIMIT if
207 TEMP_UT_WARNING status is set.
208tempX_max_alarm Chip temperature high alarm. Set by comparing
209 READ_TEMPERATURE_X with OT_WARN_LIMIT if
210 TEMP_OT_WARNING status is set.
211tempX_lcrit_alarm Chip temperature critical low alarm. Set by comparing
212 READ_TEMPERATURE_X with UT_FAULT_LIMIT if
213 TEMP_UT_FAULT status is set.
214tempX_crit_alarm Chip temperature critical high alarm. Set by comparing
215 READ_TEMPERATURE_X with OT_FAULT_LIMIT if
216 TEMP_OT_FAULT status is set.