| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * Copyright 2013 Red Hat Inc. |
| * |
| * Authors: Jérôme Glisse <jglisse@redhat.com> |
| */ |
| /* |
| * Heterogeneous Memory Management (HMM) |
| * |
| * See Documentation/vm/hmm.rst for reasons and overview of what HMM is and it |
| * is for. Here we focus on the HMM API description, with some explanation of |
| * the underlying implementation. |
| * |
| * Short description: HMM provides a set of helpers to share a virtual address |
| * space between CPU and a device, so that the device can access any valid |
| * address of the process (while still obeying memory protection). HMM also |
| * provides helpers to migrate process memory to device memory, and back. Each |
| * set of functionality (address space mirroring, and migration to and from |
| * device memory) can be used independently of the other. |
| * |
| * |
| * HMM address space mirroring API: |
| * |
| * Use HMM address space mirroring if you want to mirror a range of the CPU |
| * page tables of a process into a device page table. Here, "mirror" means "keep |
| * synchronized". Prerequisites: the device must provide the ability to write- |
| * protect its page tables (at PAGE_SIZE granularity), and must be able to |
| * recover from the resulting potential page faults. |
| * |
| * HMM guarantees that at any point in time, a given virtual address points to |
| * either the same memory in both CPU and device page tables (that is: CPU and |
| * device page tables each point to the same pages), or that one page table (CPU |
| * or device) points to no entry, while the other still points to the old page |
| * for the address. The latter case happens when the CPU page table update |
| * happens first, and then the update is mirrored over to the device page table. |
| * This does not cause any issue, because the CPU page table cannot start |
| * pointing to a new page until the device page table is invalidated. |
| * |
| * HMM uses mmu_notifiers to monitor the CPU page tables, and forwards any |
| * updates to each device driver that has registered a mirror. It also provides |
| * some API calls to help with taking a snapshot of the CPU page table, and to |
| * synchronize with any updates that might happen concurrently. |
| * |
| * |
| * HMM migration to and from device memory: |
| * |
| * HMM provides a set of helpers to hotplug device memory as ZONE_DEVICE, with |
| * a new MEMORY_DEVICE_PRIVATE type. This provides a struct page for each page |
| * of the device memory, and allows the device driver to manage its memory |
| * using those struct pages. Having struct pages for device memory makes |
| * migration easier. Because that memory is not addressable by the CPU it must |
| * never be pinned to the device; in other words, any CPU page fault can always |
| * cause the device memory to be migrated (copied/moved) back to regular memory. |
| * |
| * A new migrate helper (migrate_vma()) has been added (see mm/migrate.c) that |
| * allows use of a device DMA engine to perform the copy operation between |
| * regular system memory and device memory. |
| */ |
| #ifndef LINUX_HMM_H |
| #define LINUX_HMM_H |
| |
| #include <linux/kconfig.h> |
| #include <asm/pgtable.h> |
| |
| #ifdef CONFIG_HMM_MIRROR |
| |
| #include <linux/device.h> |
| #include <linux/migrate.h> |
| #include <linux/memremap.h> |
| #include <linux/completion.h> |
| #include <linux/mmu_notifier.h> |
| |
| |
| /* |
| * struct hmm - HMM per mm struct |
| * |
| * @mm: mm struct this HMM struct is bound to |
| * @lock: lock protecting ranges list |
| * @ranges: list of range being snapshotted |
| * @mirrors: list of mirrors for this mm |
| * @mmu_notifier: mmu notifier to track updates to CPU page table |
| * @mirrors_sem: read/write semaphore protecting the mirrors list |
| * @wq: wait queue for user waiting on a range invalidation |
| * @notifiers: count of active mmu notifiers |
| */ |
| struct hmm { |
| struct mm_struct *mm; |
| struct kref kref; |
| spinlock_t ranges_lock; |
| struct list_head ranges; |
| struct list_head mirrors; |
| struct mmu_notifier mmu_notifier; |
| struct rw_semaphore mirrors_sem; |
| wait_queue_head_t wq; |
| struct rcu_head rcu; |
| long notifiers; |
| }; |
| |
| /* |
| * hmm_pfn_flag_e - HMM flag enums |
| * |
| * Flags: |
| * HMM_PFN_VALID: pfn is valid. It has, at least, read permission. |
| * HMM_PFN_WRITE: CPU page table has write permission set |
| * HMM_PFN_DEVICE_PRIVATE: private device memory (ZONE_DEVICE) |
| * |
| * The driver provides a flags array for mapping page protections to device |
| * PTE bits. If the driver valid bit for an entry is bit 3, |
| * i.e., (entry & (1 << 3)), then the driver must provide |
| * an array in hmm_range.flags with hmm_range.flags[HMM_PFN_VALID] == 1 << 3. |
| * Same logic apply to all flags. This is the same idea as vm_page_prot in vma |
| * except that this is per device driver rather than per architecture. |
| */ |
| enum hmm_pfn_flag_e { |
| HMM_PFN_VALID = 0, |
| HMM_PFN_WRITE, |
| HMM_PFN_DEVICE_PRIVATE, |
| HMM_PFN_FLAG_MAX |
| }; |
| |
| /* |
| * hmm_pfn_value_e - HMM pfn special value |
| * |
| * Flags: |
| * HMM_PFN_ERROR: corresponding CPU page table entry points to poisoned memory |
| * HMM_PFN_NONE: corresponding CPU page table entry is pte_none() |
| * HMM_PFN_SPECIAL: corresponding CPU page table entry is special; i.e., the |
| * result of vmf_insert_pfn() or vm_insert_page(). Therefore, it should not |
| * be mirrored by a device, because the entry will never have HMM_PFN_VALID |
| * set and the pfn value is undefined. |
| * |
| * Driver provides values for none entry, error entry, and special entry. |
| * Driver can alias (i.e., use same value) error and special, but |
| * it should not alias none with error or special. |
| * |
| * HMM pfn value returned by hmm_vma_get_pfns() or hmm_vma_fault() will be: |
| * hmm_range.values[HMM_PFN_ERROR] if CPU page table entry is poisonous, |
| * hmm_range.values[HMM_PFN_NONE] if there is no CPU page table entry, |
| * hmm_range.values[HMM_PFN_SPECIAL] if CPU page table entry is a special one |
| */ |
| enum hmm_pfn_value_e { |
| HMM_PFN_ERROR, |
| HMM_PFN_NONE, |
| HMM_PFN_SPECIAL, |
| HMM_PFN_VALUE_MAX |
| }; |
| |
| /* |
| * struct hmm_range - track invalidation lock on virtual address range |
| * |
| * @hmm: the core HMM structure this range is active against |
| * @vma: the vm area struct for the range |
| * @list: all range lock are on a list |
| * @start: range virtual start address (inclusive) |
| * @end: range virtual end address (exclusive) |
| * @pfns: array of pfns (big enough for the range) |
| * @flags: pfn flags to match device driver page table |
| * @values: pfn value for some special case (none, special, error, ...) |
| * @default_flags: default flags for the range (write, read, ... see hmm doc) |
| * @pfn_flags_mask: allows to mask pfn flags so that only default_flags matter |
| * @page_shift: device virtual address shift value (should be >= PAGE_SHIFT) |
| * @pfn_shifts: pfn shift value (should be <= PAGE_SHIFT) |
| * @valid: pfns array did not change since it has been fill by an HMM function |
| */ |
| struct hmm_range { |
| struct hmm *hmm; |
| struct vm_area_struct *vma; |
| struct list_head list; |
| unsigned long start; |
| unsigned long end; |
| uint64_t *pfns; |
| const uint64_t *flags; |
| const uint64_t *values; |
| uint64_t default_flags; |
| uint64_t pfn_flags_mask; |
| uint8_t page_shift; |
| uint8_t pfn_shift; |
| bool valid; |
| }; |
| |
| /* |
| * hmm_range_page_shift() - return the page shift for the range |
| * @range: range being queried |
| * Return: page shift (page size = 1 << page shift) for the range |
| */ |
| static inline unsigned hmm_range_page_shift(const struct hmm_range *range) |
| { |
| return range->page_shift; |
| } |
| |
| /* |
| * hmm_range_page_size() - return the page size for the range |
| * @range: range being queried |
| * Return: page size for the range in bytes |
| */ |
| static inline unsigned long hmm_range_page_size(const struct hmm_range *range) |
| { |
| return 1UL << hmm_range_page_shift(range); |
| } |
| |
| /* |
| * hmm_range_wait_until_valid() - wait for range to be valid |
| * @range: range affected by invalidation to wait on |
| * @timeout: time out for wait in ms (ie abort wait after that period of time) |
| * Return: true if the range is valid, false otherwise. |
| */ |
| static inline bool hmm_range_wait_until_valid(struct hmm_range *range, |
| unsigned long timeout) |
| { |
| return wait_event_timeout(range->hmm->wq, range->valid, |
| msecs_to_jiffies(timeout)) != 0; |
| } |
| |
| /* |
| * hmm_range_valid() - test if a range is valid or not |
| * @range: range |
| * Return: true if the range is valid, false otherwise. |
| */ |
| static inline bool hmm_range_valid(struct hmm_range *range) |
| { |
| return range->valid; |
| } |
| |
| /* |
| * hmm_device_entry_to_page() - return struct page pointed to by a device entry |
| * @range: range use to decode device entry value |
| * @entry: device entry value to get corresponding struct page from |
| * Return: struct page pointer if entry is a valid, NULL otherwise |
| * |
| * If the device entry is valid (ie valid flag set) then return the struct page |
| * matching the entry value. Otherwise return NULL. |
| */ |
| static inline struct page *hmm_device_entry_to_page(const struct hmm_range *range, |
| uint64_t entry) |
| { |
| if (entry == range->values[HMM_PFN_NONE]) |
| return NULL; |
| if (entry == range->values[HMM_PFN_ERROR]) |
| return NULL; |
| if (entry == range->values[HMM_PFN_SPECIAL]) |
| return NULL; |
| if (!(entry & range->flags[HMM_PFN_VALID])) |
| return NULL; |
| return pfn_to_page(entry >> range->pfn_shift); |
| } |
| |
| /* |
| * hmm_device_entry_to_pfn() - return pfn value store in a device entry |
| * @range: range use to decode device entry value |
| * @entry: device entry to extract pfn from |
| * Return: pfn value if device entry is valid, -1UL otherwise |
| */ |
| static inline unsigned long |
| hmm_device_entry_to_pfn(const struct hmm_range *range, uint64_t pfn) |
| { |
| if (pfn == range->values[HMM_PFN_NONE]) |
| return -1UL; |
| if (pfn == range->values[HMM_PFN_ERROR]) |
| return -1UL; |
| if (pfn == range->values[HMM_PFN_SPECIAL]) |
| return -1UL; |
| if (!(pfn & range->flags[HMM_PFN_VALID])) |
| return -1UL; |
| return (pfn >> range->pfn_shift); |
| } |
| |
| /* |
| * hmm_device_entry_from_page() - create a valid device entry for a page |
| * @range: range use to encode HMM pfn value |
| * @page: page for which to create the device entry |
| * Return: valid device entry for the page |
| */ |
| static inline uint64_t hmm_device_entry_from_page(const struct hmm_range *range, |
| struct page *page) |
| { |
| return (page_to_pfn(page) << range->pfn_shift) | |
| range->flags[HMM_PFN_VALID]; |
| } |
| |
| /* |
| * hmm_device_entry_from_pfn() - create a valid device entry value from pfn |
| * @range: range use to encode HMM pfn value |
| * @pfn: pfn value for which to create the device entry |
| * Return: valid device entry for the pfn |
| */ |
| static inline uint64_t hmm_device_entry_from_pfn(const struct hmm_range *range, |
| unsigned long pfn) |
| { |
| return (pfn << range->pfn_shift) | |
| range->flags[HMM_PFN_VALID]; |
| } |
| |
| /* |
| * Old API: |
| * hmm_pfn_to_page() |
| * hmm_pfn_to_pfn() |
| * hmm_pfn_from_page() |
| * hmm_pfn_from_pfn() |
| * |
| * This are the OLD API please use new API, it is here to avoid cross-tree |
| * merge painfullness ie we convert things to new API in stages. |
| */ |
| static inline struct page *hmm_pfn_to_page(const struct hmm_range *range, |
| uint64_t pfn) |
| { |
| return hmm_device_entry_to_page(range, pfn); |
| } |
| |
| static inline unsigned long hmm_pfn_to_pfn(const struct hmm_range *range, |
| uint64_t pfn) |
| { |
| return hmm_device_entry_to_pfn(range, pfn); |
| } |
| |
| static inline uint64_t hmm_pfn_from_page(const struct hmm_range *range, |
| struct page *page) |
| { |
| return hmm_device_entry_from_page(range, page); |
| } |
| |
| static inline uint64_t hmm_pfn_from_pfn(const struct hmm_range *range, |
| unsigned long pfn) |
| { |
| return hmm_device_entry_from_pfn(range, pfn); |
| } |
| |
| /* |
| * Mirroring: how to synchronize device page table with CPU page table. |
| * |
| * A device driver that is participating in HMM mirroring must always |
| * synchronize with CPU page table updates. For this, device drivers can either |
| * directly use mmu_notifier APIs or they can use the hmm_mirror API. Device |
| * drivers can decide to register one mirror per device per process, or just |
| * one mirror per process for a group of devices. The pattern is: |
| * |
| * int device_bind_address_space(..., struct mm_struct *mm, ...) |
| * { |
| * struct device_address_space *das; |
| * |
| * // Device driver specific initialization, and allocation of das |
| * // which contains an hmm_mirror struct as one of its fields. |
| * ... |
| * |
| * ret = hmm_mirror_register(&das->mirror, mm, &device_mirror_ops); |
| * if (ret) { |
| * // Cleanup on error |
| * return ret; |
| * } |
| * |
| * // Other device driver specific initialization |
| * ... |
| * } |
| * |
| * Once an hmm_mirror is registered for an address space, the device driver |
| * will get callbacks through sync_cpu_device_pagetables() operation (see |
| * hmm_mirror_ops struct). |
| * |
| * Device driver must not free the struct containing the hmm_mirror struct |
| * before calling hmm_mirror_unregister(). The expected usage is to do that when |
| * the device driver is unbinding from an address space. |
| * |
| * |
| * void device_unbind_address_space(struct device_address_space *das) |
| * { |
| * // Device driver specific cleanup |
| * ... |
| * |
| * hmm_mirror_unregister(&das->mirror); |
| * |
| * // Other device driver specific cleanup, and now das can be freed |
| * ... |
| * } |
| */ |
| |
| struct hmm_mirror; |
| |
| /* |
| * enum hmm_update_event - type of update |
| * @HMM_UPDATE_INVALIDATE: invalidate range (no indication as to why) |
| */ |
| enum hmm_update_event { |
| HMM_UPDATE_INVALIDATE, |
| }; |
| |
| /* |
| * struct hmm_update - HMM update information for callback |
| * |
| * @start: virtual start address of the range to update |
| * @end: virtual end address of the range to update |
| * @event: event triggering the update (what is happening) |
| * @blockable: can the callback block/sleep ? |
| */ |
| struct hmm_update { |
| unsigned long start; |
| unsigned long end; |
| enum hmm_update_event event; |
| bool blockable; |
| }; |
| |
| /* |
| * struct hmm_mirror_ops - HMM mirror device operations callback |
| * |
| * @update: callback to update range on a device |
| */ |
| struct hmm_mirror_ops { |
| /* release() - release hmm_mirror |
| * |
| * @mirror: pointer to struct hmm_mirror |
| * |
| * This is called when the mm_struct is being released. The callback |
| * must ensure that all access to any pages obtained from this mirror |
| * is halted before the callback returns. All future access should |
| * fault. |
| */ |
| void (*release)(struct hmm_mirror *mirror); |
| |
| /* sync_cpu_device_pagetables() - synchronize page tables |
| * |
| * @mirror: pointer to struct hmm_mirror |
| * @update: update information (see struct hmm_update) |
| * Return: -EAGAIN if update.blockable false and callback need to |
| * block, 0 otherwise. |
| * |
| * This callback ultimately originates from mmu_notifiers when the CPU |
| * page table is updated. The device driver must update its page table |
| * in response to this callback. The update argument tells what action |
| * to perform. |
| * |
| * The device driver must not return from this callback until the device |
| * page tables are completely updated (TLBs flushed, etc); this is a |
| * synchronous call. |
| */ |
| int (*sync_cpu_device_pagetables)(struct hmm_mirror *mirror, |
| const struct hmm_update *update); |
| }; |
| |
| /* |
| * struct hmm_mirror - mirror struct for a device driver |
| * |
| * @hmm: pointer to struct hmm (which is unique per mm_struct) |
| * @ops: device driver callback for HMM mirror operations |
| * @list: for list of mirrors of a given mm |
| * |
| * Each address space (mm_struct) being mirrored by a device must register one |
| * instance of an hmm_mirror struct with HMM. HMM will track the list of all |
| * mirrors for each mm_struct. |
| */ |
| struct hmm_mirror { |
| struct hmm *hmm; |
| const struct hmm_mirror_ops *ops; |
| struct list_head list; |
| }; |
| |
| int hmm_mirror_register(struct hmm_mirror *mirror, struct mm_struct *mm); |
| void hmm_mirror_unregister(struct hmm_mirror *mirror); |
| |
| /* |
| * Please see Documentation/vm/hmm.rst for how to use the range API. |
| */ |
| int hmm_range_register(struct hmm_range *range, |
| struct hmm_mirror *mirror, |
| unsigned long start, |
| unsigned long end, |
| unsigned page_shift); |
| void hmm_range_unregister(struct hmm_range *range); |
| long hmm_range_snapshot(struct hmm_range *range); |
| long hmm_range_fault(struct hmm_range *range, bool block); |
| long hmm_range_dma_map(struct hmm_range *range, |
| struct device *device, |
| dma_addr_t *daddrs, |
| bool block); |
| long hmm_range_dma_unmap(struct hmm_range *range, |
| struct vm_area_struct *vma, |
| struct device *device, |
| dma_addr_t *daddrs, |
| bool dirty); |
| |
| /* |
| * HMM_RANGE_DEFAULT_TIMEOUT - default timeout (ms) when waiting for a range |
| * |
| * When waiting for mmu notifiers we need some kind of time out otherwise we |
| * could potentialy wait for ever, 1000ms ie 1s sounds like a long time to |
| * wait already. |
| */ |
| #define HMM_RANGE_DEFAULT_TIMEOUT 1000 |
| |
| /* Below are for HMM internal use only! Not to be used by device driver! */ |
| static inline void hmm_mm_init(struct mm_struct *mm) |
| { |
| mm->hmm = NULL; |
| } |
| #else /* IS_ENABLED(CONFIG_HMM_MIRROR) */ |
| static inline void hmm_mm_init(struct mm_struct *mm) {} |
| #endif /* IS_ENABLED(CONFIG_HMM_MIRROR) */ |
| |
| #endif /* LINUX_HMM_H */ |