| /* |
| * drivers/spi/spi-fsl-dspi.c |
| * |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| * |
| * Freescale DSPI driver |
| * This file contains a driver for the Freescale DSPI |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/sched.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/spi_bitbang.h> |
| |
| #define DRIVER_NAME "fsl-dspi" |
| |
| #define TRAN_STATE_RX_VOID 0x01 |
| #define TRAN_STATE_TX_VOID 0x02 |
| #define TRAN_STATE_WORD_ODD_NUM 0x04 |
| |
| #define DSPI_FIFO_SIZE 4 |
| |
| #define SPI_MCR 0x00 |
| #define SPI_MCR_MASTER (1 << 31) |
| #define SPI_MCR_PCSIS (0x3F << 16) |
| #define SPI_MCR_CLR_TXF (1 << 11) |
| #define SPI_MCR_CLR_RXF (1 << 10) |
| |
| #define SPI_TCR 0x08 |
| |
| #define SPI_CTAR(x) (0x0c + (((x) & 0x3) * 4)) |
| #define SPI_CTAR_FMSZ(x) (((x) & 0x0000000f) << 27) |
| #define SPI_CTAR_CPOL(x) ((x) << 26) |
| #define SPI_CTAR_CPHA(x) ((x) << 25) |
| #define SPI_CTAR_LSBFE(x) ((x) << 24) |
| #define SPI_CTAR_PCSSCR(x) (((x) & 0x00000003) << 22) |
| #define SPI_CTAR_PASC(x) (((x) & 0x00000003) << 20) |
| #define SPI_CTAR_PDT(x) (((x) & 0x00000003) << 18) |
| #define SPI_CTAR_PBR(x) (((x) & 0x00000003) << 16) |
| #define SPI_CTAR_CSSCK(x) (((x) & 0x0000000f) << 12) |
| #define SPI_CTAR_ASC(x) (((x) & 0x0000000f) << 8) |
| #define SPI_CTAR_DT(x) (((x) & 0x0000000f) << 4) |
| #define SPI_CTAR_BR(x) ((x) & 0x0000000f) |
| |
| #define SPI_CTAR0_SLAVE 0x0c |
| |
| #define SPI_SR 0x2c |
| #define SPI_SR_EOQF 0x10000000 |
| |
| #define SPI_RSER 0x30 |
| #define SPI_RSER_EOQFE 0x10000000 |
| |
| #define SPI_PUSHR 0x34 |
| #define SPI_PUSHR_CONT (1 << 31) |
| #define SPI_PUSHR_CTAS(x) (((x) & 0x00000003) << 28) |
| #define SPI_PUSHR_EOQ (1 << 27) |
| #define SPI_PUSHR_CTCNT (1 << 26) |
| #define SPI_PUSHR_PCS(x) (((1 << x) & 0x0000003f) << 16) |
| #define SPI_PUSHR_TXDATA(x) ((x) & 0x0000ffff) |
| |
| #define SPI_PUSHR_SLAVE 0x34 |
| |
| #define SPI_POPR 0x38 |
| #define SPI_POPR_RXDATA(x) ((x) & 0x0000ffff) |
| |
| #define SPI_TXFR0 0x3c |
| #define SPI_TXFR1 0x40 |
| #define SPI_TXFR2 0x44 |
| #define SPI_TXFR3 0x48 |
| #define SPI_RXFR0 0x7c |
| #define SPI_RXFR1 0x80 |
| #define SPI_RXFR2 0x84 |
| #define SPI_RXFR3 0x88 |
| |
| #define SPI_FRAME_BITS(bits) SPI_CTAR_FMSZ((bits) - 1) |
| #define SPI_FRAME_BITS_MASK SPI_CTAR_FMSZ(0xf) |
| #define SPI_FRAME_BITS_16 SPI_CTAR_FMSZ(0xf) |
| #define SPI_FRAME_BITS_8 SPI_CTAR_FMSZ(0x7) |
| |
| #define SPI_CS_INIT 0x01 |
| #define SPI_CS_ASSERT 0x02 |
| #define SPI_CS_DROP 0x04 |
| |
| struct chip_data { |
| u32 mcr_val; |
| u32 ctar_val; |
| u16 void_write_data; |
| }; |
| |
| struct fsl_dspi { |
| struct spi_master *master; |
| struct platform_device *pdev; |
| |
| struct regmap *regmap; |
| int irq; |
| struct clk *clk; |
| |
| struct spi_transfer *cur_transfer; |
| struct spi_message *cur_msg; |
| struct chip_data *cur_chip; |
| size_t len; |
| void *tx; |
| void *tx_end; |
| void *rx; |
| void *rx_end; |
| char dataflags; |
| u8 cs; |
| u16 void_write_data; |
| u32 cs_change; |
| |
| wait_queue_head_t waitq; |
| u32 waitflags; |
| }; |
| |
| static inline int is_double_byte_mode(struct fsl_dspi *dspi) |
| { |
| unsigned int val; |
| |
| regmap_read(dspi->regmap, SPI_CTAR(dspi->cs), &val); |
| |
| return ((val & SPI_FRAME_BITS_MASK) == SPI_FRAME_BITS(8)) ? 0 : 1; |
| } |
| |
| static void hz_to_spi_baud(char *pbr, char *br, int speed_hz, |
| unsigned long clkrate) |
| { |
| /* Valid baud rate pre-scaler values */ |
| int pbr_tbl[4] = {2, 3, 5, 7}; |
| int brs[16] = { 2, 4, 6, 8, |
| 16, 32, 64, 128, |
| 256, 512, 1024, 2048, |
| 4096, 8192, 16384, 32768 }; |
| int temp, i = 0, j = 0; |
| |
| temp = clkrate / 2 / speed_hz; |
| |
| for (i = 0; i < ARRAY_SIZE(pbr_tbl); i++) |
| for (j = 0; j < ARRAY_SIZE(brs); j++) { |
| if (pbr_tbl[i] * brs[j] >= temp) { |
| *pbr = i; |
| *br = j; |
| return; |
| } |
| } |
| |
| pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld\ |
| ,we use the max prescaler value.\n", speed_hz, clkrate); |
| *pbr = ARRAY_SIZE(pbr_tbl) - 1; |
| *br = ARRAY_SIZE(brs) - 1; |
| } |
| |
| static int dspi_transfer_write(struct fsl_dspi *dspi) |
| { |
| int tx_count = 0; |
| int tx_word; |
| u16 d16; |
| u8 d8; |
| u32 dspi_pushr = 0; |
| int first = 1; |
| |
| tx_word = is_double_byte_mode(dspi); |
| |
| /* If we are in word mode, but only have a single byte to transfer |
| * then switch to byte mode temporarily. Will switch back at the |
| * end of the transfer. |
| */ |
| if (tx_word && (dspi->len == 1)) { |
| dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM; |
| regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs), |
| SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8)); |
| tx_word = 0; |
| } |
| |
| while (dspi->len && (tx_count < DSPI_FIFO_SIZE)) { |
| if (tx_word) { |
| if (dspi->len == 1) |
| break; |
| |
| if (!(dspi->dataflags & TRAN_STATE_TX_VOID)) { |
| d16 = *(u16 *)dspi->tx; |
| dspi->tx += 2; |
| } else { |
| d16 = dspi->void_write_data; |
| } |
| |
| dspi_pushr = SPI_PUSHR_TXDATA(d16) | |
| SPI_PUSHR_PCS(dspi->cs) | |
| SPI_PUSHR_CTAS(dspi->cs) | |
| SPI_PUSHR_CONT; |
| |
| dspi->len -= 2; |
| } else { |
| if (!(dspi->dataflags & TRAN_STATE_TX_VOID)) { |
| |
| d8 = *(u8 *)dspi->tx; |
| dspi->tx++; |
| } else { |
| d8 = (u8)dspi->void_write_data; |
| } |
| |
| dspi_pushr = SPI_PUSHR_TXDATA(d8) | |
| SPI_PUSHR_PCS(dspi->cs) | |
| SPI_PUSHR_CTAS(dspi->cs) | |
| SPI_PUSHR_CONT; |
| |
| dspi->len--; |
| } |
| |
| if (dspi->len == 0 || tx_count == DSPI_FIFO_SIZE - 1) { |
| /* last transfer in the transfer */ |
| dspi_pushr |= SPI_PUSHR_EOQ; |
| if ((dspi->cs_change) && (!dspi->len)) |
| dspi_pushr &= ~SPI_PUSHR_CONT; |
| } else if (tx_word && (dspi->len == 1)) |
| dspi_pushr |= SPI_PUSHR_EOQ; |
| |
| if (first) { |
| first = 0; |
| dspi_pushr |= SPI_PUSHR_CTCNT; /* clear counter */ |
| } |
| |
| regmap_write(dspi->regmap, SPI_PUSHR, dspi_pushr); |
| |
| tx_count++; |
| } |
| |
| return tx_count * (tx_word + 1); |
| } |
| |
| static int dspi_transfer_read(struct fsl_dspi *dspi) |
| { |
| int rx_count = 0; |
| int rx_word = is_double_byte_mode(dspi); |
| u16 d; |
| |
| while ((dspi->rx < dspi->rx_end) |
| && (rx_count < DSPI_FIFO_SIZE)) { |
| if (rx_word) { |
| unsigned int val; |
| |
| if ((dspi->rx_end - dspi->rx) == 1) |
| break; |
| |
| regmap_read(dspi->regmap, SPI_POPR, &val); |
| d = SPI_POPR_RXDATA(val); |
| |
| if (!(dspi->dataflags & TRAN_STATE_RX_VOID)) |
| *(u16 *)dspi->rx = d; |
| dspi->rx += 2; |
| |
| } else { |
| unsigned int val; |
| |
| regmap_read(dspi->regmap, SPI_POPR, &val); |
| d = SPI_POPR_RXDATA(val); |
| if (!(dspi->dataflags & TRAN_STATE_RX_VOID)) |
| *(u8 *)dspi->rx = d; |
| dspi->rx++; |
| } |
| rx_count++; |
| } |
| |
| return rx_count; |
| } |
| |
| static int dspi_transfer_one_message(struct spi_master *master, |
| struct spi_message *message) |
| { |
| struct fsl_dspi *dspi = spi_master_get_devdata(master); |
| struct spi_device *spi = message->spi; |
| struct spi_transfer *transfer; |
| int status = 0; |
| message->actual_length = 0; |
| |
| list_for_each_entry(transfer, &message->transfers, transfer_list) { |
| dspi->cur_transfer = transfer; |
| dspi->cur_msg = message; |
| dspi->cur_chip = spi_get_ctldata(spi); |
| dspi->cs = spi->chip_select; |
| if (dspi->cur_transfer->transfer_list.next |
| == &dspi->cur_msg->transfers) |
| transfer->cs_change = 1; |
| dspi->cs_change = transfer->cs_change; |
| dspi->void_write_data = dspi->cur_chip->void_write_data; |
| |
| dspi->dataflags = 0; |
| dspi->tx = (void *)transfer->tx_buf; |
| dspi->tx_end = dspi->tx + transfer->len; |
| dspi->rx = transfer->rx_buf; |
| dspi->rx_end = dspi->rx + transfer->len; |
| dspi->len = transfer->len; |
| |
| if (!dspi->rx) |
| dspi->dataflags |= TRAN_STATE_RX_VOID; |
| |
| if (!dspi->tx) |
| dspi->dataflags |= TRAN_STATE_TX_VOID; |
| |
| regmap_write(dspi->regmap, SPI_MCR, dspi->cur_chip->mcr_val); |
| regmap_update_bits(dspi->regmap, SPI_MCR, |
| SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF, |
| SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF); |
| regmap_write(dspi->regmap, SPI_CTAR(dspi->cs), |
| dspi->cur_chip->ctar_val); |
| if (transfer->speed_hz) |
| regmap_write(dspi->regmap, SPI_CTAR(dspi->cs), |
| dspi->cur_chip->ctar_val); |
| |
| regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE); |
| message->actual_length += dspi_transfer_write(dspi); |
| |
| if (wait_event_interruptible(dspi->waitq, dspi->waitflags)) |
| dev_err(&dspi->pdev->dev, "wait transfer complete fail!\n"); |
| dspi->waitflags = 0; |
| |
| if (transfer->delay_usecs) |
| udelay(transfer->delay_usecs); |
| } |
| |
| message->status = status; |
| spi_finalize_current_message(master); |
| |
| return status; |
| } |
| |
| static int dspi_setup(struct spi_device *spi) |
| { |
| struct chip_data *chip; |
| struct fsl_dspi *dspi = spi_master_get_devdata(spi->master); |
| unsigned char br = 0, pbr = 0, fmsz = 0; |
| |
| if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) { |
| fmsz = spi->bits_per_word - 1; |
| } else { |
| pr_err("Invalid wordsize\n"); |
| return -ENODEV; |
| } |
| |
| /* Only alloc on first setup */ |
| chip = spi_get_ctldata(spi); |
| if (chip == NULL) { |
| chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| } |
| |
| chip->mcr_val = SPI_MCR_MASTER | SPI_MCR_PCSIS | |
| SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF; |
| |
| chip->void_write_data = 0; |
| |
| hz_to_spi_baud(&pbr, &br, |
| spi->max_speed_hz, clk_get_rate(dspi->clk)); |
| |
| chip->ctar_val = SPI_CTAR_FMSZ(fmsz) |
| | SPI_CTAR_CPOL(spi->mode & SPI_CPOL ? 1 : 0) |
| | SPI_CTAR_CPHA(spi->mode & SPI_CPHA ? 1 : 0) |
| | SPI_CTAR_LSBFE(spi->mode & SPI_LSB_FIRST ? 1 : 0) |
| | SPI_CTAR_PBR(pbr) |
| | SPI_CTAR_BR(br); |
| |
| spi_set_ctldata(spi, chip); |
| |
| return 0; |
| } |
| |
| static void dspi_cleanup(struct spi_device *spi) |
| { |
| struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi); |
| |
| dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n", |
| spi->master->bus_num, spi->chip_select); |
| |
| kfree(chip); |
| } |
| |
| static irqreturn_t dspi_interrupt(int irq, void *dev_id) |
| { |
| struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id; |
| |
| struct spi_message *msg = dspi->cur_msg; |
| |
| regmap_write(dspi->regmap, SPI_SR, SPI_SR_EOQF); |
| dspi_transfer_read(dspi); |
| |
| if (!dspi->len) { |
| if (dspi->dataflags & TRAN_STATE_WORD_ODD_NUM) |
| regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs), |
| SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(16)); |
| |
| dspi->waitflags = 1; |
| wake_up_interruptible(&dspi->waitq); |
| } else |
| msg->actual_length += dspi_transfer_write(dspi); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct of_device_id fsl_dspi_dt_ids[] = { |
| { .compatible = "fsl,vf610-dspi", .data = NULL, }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids); |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int dspi_suspend(struct device *dev) |
| { |
| struct spi_master *master = dev_get_drvdata(dev); |
| struct fsl_dspi *dspi = spi_master_get_devdata(master); |
| |
| spi_master_suspend(master); |
| clk_disable_unprepare(dspi->clk); |
| |
| return 0; |
| } |
| |
| static int dspi_resume(struct device *dev) |
| { |
| struct spi_master *master = dev_get_drvdata(dev); |
| struct fsl_dspi *dspi = spi_master_get_devdata(master); |
| |
| clk_prepare_enable(dspi->clk); |
| spi_master_resume(master); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static SIMPLE_DEV_PM_OPS(dspi_pm, dspi_suspend, dspi_resume); |
| |
| static const struct regmap_config dspi_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = 0x88, |
| }; |
| |
| static int dspi_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct spi_master *master; |
| struct fsl_dspi *dspi; |
| struct resource *res; |
| void __iomem *base; |
| int ret = 0, cs_num, bus_num; |
| |
| master = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi)); |
| if (!master) |
| return -ENOMEM; |
| |
| dspi = spi_master_get_devdata(master); |
| dspi->pdev = pdev; |
| dspi->master = master; |
| |
| master->transfer = NULL; |
| master->setup = dspi_setup; |
| master->transfer_one_message = dspi_transfer_one_message; |
| master->dev.of_node = pdev->dev.of_node; |
| |
| master->cleanup = dspi_cleanup; |
| master->mode_bits = SPI_CPOL | SPI_CPHA; |
| master->bits_per_word_mask = SPI_BPW_MASK(4) | SPI_BPW_MASK(8) | |
| SPI_BPW_MASK(16); |
| |
| ret = of_property_read_u32(np, "spi-num-chipselects", &cs_num); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "can't get spi-num-chipselects\n"); |
| goto out_master_put; |
| } |
| master->num_chipselect = cs_num; |
| |
| ret = of_property_read_u32(np, "bus-num", &bus_num); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "can't get bus-num\n"); |
| goto out_master_put; |
| } |
| master->bus_num = bus_num; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(base)) { |
| ret = PTR_ERR(base); |
| goto out_master_put; |
| } |
| |
| dspi->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dspi", base, |
| &dspi_regmap_config); |
| if (IS_ERR(dspi->regmap)) { |
| dev_err(&pdev->dev, "failed to init regmap: %ld\n", |
| PTR_ERR(dspi->regmap)); |
| return PTR_ERR(dspi->regmap); |
| } |
| |
| dspi->irq = platform_get_irq(pdev, 0); |
| if (dspi->irq < 0) { |
| dev_err(&pdev->dev, "can't get platform irq\n"); |
| ret = dspi->irq; |
| goto out_master_put; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0, |
| pdev->name, dspi); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n"); |
| goto out_master_put; |
| } |
| |
| dspi->clk = devm_clk_get(&pdev->dev, "dspi"); |
| if (IS_ERR(dspi->clk)) { |
| ret = PTR_ERR(dspi->clk); |
| dev_err(&pdev->dev, "unable to get clock\n"); |
| goto out_master_put; |
| } |
| clk_prepare_enable(dspi->clk); |
| |
| init_waitqueue_head(&dspi->waitq); |
| platform_set_drvdata(pdev, master); |
| |
| ret = spi_register_master(master); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Problem registering DSPI master\n"); |
| goto out_clk_put; |
| } |
| |
| return ret; |
| |
| out_clk_put: |
| clk_disable_unprepare(dspi->clk); |
| out_master_put: |
| spi_master_put(master); |
| |
| return ret; |
| } |
| |
| static int dspi_remove(struct platform_device *pdev) |
| { |
| struct spi_master *master = platform_get_drvdata(pdev); |
| struct fsl_dspi *dspi = spi_master_get_devdata(master); |
| |
| /* Disconnect from the SPI framework */ |
| clk_disable_unprepare(dspi->clk); |
| spi_unregister_master(dspi->master); |
| spi_master_put(dspi->master); |
| |
| return 0; |
| } |
| |
| static struct platform_driver fsl_dspi_driver = { |
| .driver.name = DRIVER_NAME, |
| .driver.of_match_table = fsl_dspi_dt_ids, |
| .driver.owner = THIS_MODULE, |
| .driver.pm = &dspi_pm, |
| .probe = dspi_probe, |
| .remove = dspi_remove, |
| }; |
| module_platform_driver(fsl_dspi_driver); |
| |
| MODULE_DESCRIPTION("Freescale DSPI Controller Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |