Documentation/gpu/todo.rst - kernel/msm-5.4 - Gitiles

 .. _todo:

 =========
 TODO list
 =========

 This section contains a list of smaller janitorial tasks in the kernel DRM
 graphics subsystem useful as newbie projects. Or for slow rainy days.

 Subsystem-wide refactorings
 ===========================

 De-midlayer drivers
 -------------------

 With the recent ``drm_bus`` cleanup patches for 3.17 it is no longer required
 to have a ``drm_bus`` structure set up. Drivers can directly set up the
 ``drm_device`` structure instead of relying on bus methods in ``drm_usb.c``
 and ``drm_pci.c``. The goal is to get rid of the driver's ``->load`` /
 ``->unload`` callbacks and open-code the load/unload sequence properly, using
 the new two-stage ``drm_device`` setup/teardown.

 Once all existing drivers are converted we can also remove those bus support
 files for USB and platform devices.

 All you need is a GPU for a non-converted driver (currently almost all of
 them, but also all the virtual ones used by KVM, so everyone qualifies).

 Contact: Daniel Vetter, Thierry Reding, respective driver maintainers

 Switch from reference/unreference to get/put
 --------------------------------------------

 For some reason DRM core uses ``reference``/``unreference`` suffixes for
 refcounting functions, but kernel uses ``get``/``put`` (e.g.
 ``kref_get``/``put()``). It would be good to switch over for consistency, and
 it's shorter. Needs to be done in 3 steps for each pair of functions:

 * Create new ``get``/``put`` functions, define the old names as compatibility
   wrappers
 * Switch over each file/driver using a cocci-generated spatch.
 * Once all users of the old names are gone, remove them.

 This way drivers/patches in the progress of getting merged won't break.

 Contact: Daniel Vetter

 Convert existing KMS drivers to atomic modesetting
 --------------------------------------------------

 3.19 has the atomic modeset interfaces and helpers, so drivers can now be
 converted over. Modern compositors like Wayland or Surfaceflinger on Android
 really want an atomic modeset interface, so this is all about the bright
 future.

 There is a conversion guide for atomic and all you need is a GPU for a
 non-converted driver (again virtual HW drivers for KVM are still all
 suitable).

 As part of this drivers also need to convert to universal plane (which means
 exposing primary & cursor as proper plane objects). But that's much easier to
 do by directly using the new atomic helper driver callbacks.

 Contact: Daniel Vetter, respective driver maintainers

 Clean up the clipped coordination confusion around planes
 ---------------------------------------------------------

 We have a helper to get this right with drm_plane_helper_check_update(), but
 it's not consistently used. This should be fixed, preferrably in the atomic
 helpers (and drivers then moved over to clipped coordinates). Probably the
 helper should also be moved from drm_plane_helper.c to the atomic helpers, to
 avoid confusion - the other helpers in that file are all deprecated legacy
 helpers.

 Contact: Ville Syrjälä, Daniel Vetter, driver maintainers

 Convert early atomic drivers to async commit helpers
 ----------------------------------------------------

 For the first year the atomic modeset helpers didn't support asynchronous /
 nonblocking commits, and every driver had to hand-roll them. This is fixed
 now, but there's still a pile of existing drivers that easily could be
 converted over to the new infrastructure.

 One issue with the helpers is that they require that drivers handle completion
 events for atomic commits correctly. But fixing these bugs is good anyway.

 Contact: Daniel Vetter, respective driver maintainers

 Better manual-upload support for atomic
 ---------------------------------------

 This would be especially useful for tinydrm:

 - Add a struct drm_rect dirty_clip to drm_crtc_state. When duplicating the
   crtc state, clear that to the max values, x/y = 0 and w/h = MAX_INT, in
   __drm_atomic_helper_crtc_duplicate_state().

 - Move tinydrm_merge_clips into drm_framebuffer.c, dropping the tinydrm\_
   prefix ofc and using drm_fb\_. drm_framebuffer.c makes sense since this
   is a function useful to implement the fb->dirty function.

 - Create a new drm_fb_dirty function which does essentially what e.g.
   mipi_dbi_fb_dirty does. You can use e.g. drm_atomic_helper_update_plane as the
   template. But instead of doing a simple full-screen plane update, this new
   helper also sets crtc_state->dirty_clip to the right coordinates. And of
   course it needs to check whether the fb is actually active (and maybe where),
   so there's some book-keeping involved. There's also some good fun involved in
   scaling things appropriately. For that case we might simply give up and
   declare the entire area covered by the plane as dirty.

 Contact: Noralf Trønnes, Daniel Vetter

 Fallout from atomic KMS
 -----------------------

 ``drm_atomic_helper.c`` provides a batch of functions which implement legacy
 IOCTLs on top of the new atomic driver interface. Which is really nice for
 gradual conversion of drivers, but unfortunately the semantic mismatches are
 a bit too severe. So there's some follow-up work to adjust the function
 interfaces to fix these issues:

 * atomic needs the lock acquire context. At the moment that's passed around
   implicitly with some horrible hacks, and it's also allocate with
   ``GFP_NOFAIL`` behind the scenes. All legacy paths need to start allocating
   the acquire context explicitly on stack and then also pass it down into
   drivers explicitly so that the legacy-on-atomic functions can use them.

   Except for some driver code this is done.

 * A bunch of the vtable hooks are now in the wrong place: DRM has a split
   between core vfunc tables (named ``drm_foo_funcs``), which are used to
   implement the userspace ABI. And then there's the optional hooks for the
   helper libraries (name ``drm_foo_helper_funcs``), which are purely for
   internal use. Some of these hooks should be move from ``_funcs`` to
   ``_helper_funcs`` since they are not part of the core ABI. There's a
   ``FIXME`` comment in the kerneldoc for each such case in ``drm_crtc.h``.

 * There's a new helper ``drm_atomic_helper_best_encoder()`` which could be
   used by all atomic drivers which don't select the encoder for a given
   connector at runtime. That's almost all of them, and would allow us to get
   rid of a lot of ``best_encoder`` boilerplate in drivers.

   This was almost done, but new drivers added a few more cases again.

 Contact: Daniel Vetter

 Get rid of dev->struct_mutex from GEM drivers
 ---------------------------------------------

 ``dev->struct_mutex`` is the Big DRM Lock from legacy days and infested
 everything. Nowadays in modern drivers the only bit where it's mandatory is
 serializing GEM buffer object destruction. Which unfortunately means drivers
 have to keep track of that lock and either call ``unreference`` or
 ``unreference_locked`` depending upon context.

 Core GEM doesn't have a need for ``struct_mutex`` any more since kernel 4.8,
 and there's a ``gem_free_object_unlocked`` callback for any drivers which are
 entirely ``struct_mutex`` free.

 For drivers that need ``struct_mutex`` it should be replaced with a driver-
 private lock. The tricky part is the BO free functions, since those can't
 reliably take that lock any more. Instead state needs to be protected with
 suitable subordinate locks or some cleanup work pushed to a worker thread. For
 performance-critical drivers it might also be better to go with a more
 fine-grained per-buffer object and per-context lockings scheme. Currently the
 following drivers still use ``struct_mutex``: ``msm``, ``omapdrm`` and
 ``udl``.

 Contact: Daniel Vetter, respective driver maintainers

 Convert instances of dev_info/dev_err/dev_warn to their DRM_DEV_* equivalent
 ----------------------------------------------------------------------------

 For drivers which could have multiple instances, it is necessary to
 differentiate between which is which in the logs. Since DRM_INFO/WARN/ERROR
 don't do this, drivers used dev_info/warn/err to make this differentiation. We
 now have DRM_DEV_* variants of the drm print macros, so we can start to convert
 those drivers back to using drm-formwatted specific log messages.

 Contact: Sean Paul, Maintainer of the driver you plan to convert

 Core refactorings
 =================

 Clean up the DRM header mess
 ----------------------------

 Currently the DRM subsystem has only one global header, ``drmP.h``. This is
 used both for functions exported to helper libraries and drivers and functions
 only used internally in the ``drm.ko`` module. The goal would be to move all
 header declarations not needed outside of ``drm.ko`` into
 ``drivers/gpu/drm/drm_*_internal.h`` header files. ``EXPORT_SYMBOL`` also
 needs to be dropped for these functions.

 This would nicely tie in with the below task to create kerneldoc after the API
 is cleaned up. Or with the "hide legacy cruft better" task.

 Note that this is well in progress, but ``drmP.h`` is still huge. The updated
 plan is to switch to per-file driver API headers, which will also structure
 the kerneldoc better. This should also allow more fine-grained ``#include``
 directives.

 In the end no .c file should need to include ``drmP.h`` anymore.

 Contact: Daniel Vetter

 Add missing kerneldoc for exported functions
 --------------------------------------------

 The DRM reference documentation is still lacking kerneldoc in a few areas. The
 task would be to clean up interfaces like moving functions around between
 files to better group them and improving the interfaces like dropping return
 values for functions that never fail. Then write kerneldoc for all exported
 functions and an overview section and integrate it all into the drm book.

 See https://dri.freedesktop.org/docs/drm/ for what's there already.

 Contact: Daniel Vetter

 Hide legacy cruft better
 ------------------------

 Way back DRM supported only drivers which shadow-attached to PCI devices with
 userspace or fbdev drivers setting up outputs. Modern DRM drivers take charge
 of the entire device, you can spot them with the DRIVER_MODESET flag.

 Unfortunately there's still large piles of legacy code around which needs to
 be hidden so that driver writers don't accidentally end up using it. And to
 prevent security issues in those legacy IOCTLs from being exploited on modern
 drivers. This has multiple possible subtasks:

 * Extract support code for legacy features into a ``drm-legacy.ko`` kernel
   module and compile it only when one of the legacy drivers is enabled.

 This is mostly done, the only thing left is to split up ``drm_irq.c`` into
 legacy cruft and the parts needed by modern KMS drivers.

 Contact: Daniel Vetter

 Make panic handling work
 ------------------------

 This is a really varied tasks with lots of little bits and pieces:

 * The panic path can't be tested currently, leading to constant breaking. The
   main issue here is that panics can be triggered from hardirq contexts and
   hence all panic related callback can run in hardirq context. It would be
   awesome if we could test at least the fbdev helper code and driver code by
   e.g. trigger calls through drm debugfs files. hardirq context could be
   achieved by using an IPI to the local processor.

 * There's a massive confusion of different panic handlers. DRM fbdev emulation
   helpers have one, but on top of that the fbcon code itself also has one. We
   need to make sure that they stop fighting over each another.

 * ``drm_can_sleep()`` is a mess. It hides real bugs in normal operations and
   isn't a full solution for panic paths. We need to make sure that it only
   returns true if there's a panic going on for real, and fix up all the
   fallout.

 * The panic handler must never sleep, which also means it can't ever
   ``mutex_lock()``. Also it can't grab any other lock unconditionally, not
   even spinlocks (because NMI and hardirq can panic too). We need to either
   make sure to not call such paths, or trylock everything. Really tricky.

 * For the above locking troubles reasons it's pretty much impossible to
   attempt a synchronous modeset from panic handlers. The only thing we could
   try to achive is an atomic ``set_base`` of the primary plane, and hope that
   it shows up. Everything else probably needs to be delayed to some worker or
   something else which happens later on. Otherwise it just kills the box
   harder, prevent the panic from going out on e.g. netconsole.

 * There's also proposal for a simplied DRM console instead of the full-blown
   fbcon and DRM fbdev emulation. Any kind of panic handling tricks should
   obviously work for both console, in case we ever get kmslog merged.

 Contact: Daniel Vetter

 Clean up the debugfs support
 ----------------------------

 There's a bunch of issues with it:

 - The drm_info_list ->show() function doesn't even bother to cast to the drm
   structure for you. This is lazy.

 - We probably want to have some support for debugfs files on crtc/connectors and
   maybe other kms objects directly in core. There's even drm_print support in
   the funcs for these objects to dump kms state, so it's all there. And then the
   ->show() functions should obviously give you a pointer to the right object.

 - The drm_info_list stuff is centered on drm_minor instead of drm_device. For
   anything we want to print drm_device (or maybe drm_file) is the right thing.

 - The drm_driver->debugfs_init hooks we have is just an artifact of the old
   midlayered load sequence. DRM debugfs should work more like sysfs, where you
   can create properties/files for an object anytime you want, and the core
   takes care of publishing/unpuplishing all the files at register/unregister
   time. Drivers shouldn't need to worry about these technicalities, and fixing
   this (together with the drm_minor->drm_device move) would allow us to remove
   debugfs_init.

 Contact: Daniel Vetter

 KMS cleanups
 ------------

 Some of these date from the very introduction of KMS in 2008 ...

 - drm_mode_config.crtc_idr is misnamed, since it contains all KMS object. Should
   be renamed to drm_mode_config.object_idr.

 - drm_display_mode doesn't need to be derived from drm_mode_object. That's
   leftovers from older (never merged into upstream) KMS designs where modes
   where set using their ID, including support to add/remove modes.

 Better Testing
 ==============

 Enable trinity for DRM
 ----------------------

 And fix up the fallout. Should be really interesting ...

 Make KMS tests in i-g-t generic
 -------------------------------

 The i915 driver team maintains an extensive testsuite for the i915 DRM driver,
 including tons of testcases for corner-cases in the modesetting API. It would
 be awesome if those tests (at least the ones not relying on Intel-specific GEM
 features) could be made to run on any KMS driver.

 Basic work to run i-g-t tests on non-i915 is done, what's now missing is mass-
 converting things over. For modeset tests we also first need a bit of
 infrastructure to use dumb buffers for untiled buffers, to be able to run all
 the non-i915 specific modeset tests.

 Contact: Daniel Vetter

 Create a virtual KMS driver for testing (vkms)
 ----------------------------------------------

 With all the latest helpers it should be fairly simple to create a virtual KMS
 driver useful for testing, or for running X or similar on headless machines
 (to be able to still use the GPU). This would be similar to vgem, but aimed at
 the modeset side.

 Once the basics are there there's tons of possibilities to extend it.

 Contact: Daniel Vetter

 Driver Specific
 ===============

 tinydrm
 -------

 Tinydrm is the helper driver for really simple fb drivers. The goal is to make
 those drivers as simple as possible, so lots of room for refactoring:

 - backlight helpers, probably best to put them into a new drm_backlight.c.
   This is because drivers/video is de-facto unmaintained. We could also
   move drivers/video/backlight to drivers/gpu/backlight and take it all
   over within drm-misc, but that's more work. Backlight helpers require a fair
   bit of reworking and refactoring. A simple example is the enabling of a backlight.
   Tinydrm has helpers for this. It would be good if other drivers can also use the
   helper. However, there are various cases we need to consider i.e different
   drivers seem to have different ways of enabling/disabling a backlight.
   We also need to consider the backlight drivers (like gpio_backlight). The situation
   is further complicated by the fact that the backlight is tied to fbdev
   via fb_notifier_callback() which has complicated logic. For further details, refer
   to the following discussion thread:
   https://groups.google.com/forum/#!topic/outreachy-kernel/8rBe30lwtdA

 - spi helpers, probably best put into spi core/helper code. Thierry said
   the spi maintainer is fast&reactive, so shouldn't be a big issue.

 - extract the mipi-dbi helper (well, the non-tinydrm specific parts at
   least) into a separate helper, like we have for mipi-dsi already. Or follow
   one of the ideas for having a shared dsi/dbi helper, abstracting away the
   transport details more.

 - tinydrm_lastclose could be drm_fb_helper_lastclose. Only thing we need
   for that is to store the drm_fb_helper pointer somewhere in
   drm_device->mode_config. And then we could roll that out to all the
   drivers.

 - tinydrm_gem_cma_prime_import_sg_table should probably go into the cma
   helpers, as a _vmapped variant (since not every driver needs the vmap).
   And tinydrm_gem_cma_free_object could the be merged into
   drm_gem_cma_free_object().

 - tinydrm_fb_create we could move into drm_simple_pipe, only need to add
   the fb_create hook to drm_simple_pipe_funcs, which would again simplify a
   bunch of things (since it gives you a one-stop vfunc for simple drivers).

 - Quick aside: The unregister devm stuff is kinda getting the lifetimes of
   a drm_device wrong. Doesn't matter, since everyone else gets it wrong
   too :-)

 - With the fbdev pointer in dev->mode_config we could also make
   suspend/resume helpers entirely generic, at least if we add a
   dev->mode_config.suspend_state. We could even provide a generic pm_ops
   structure with those.

 - also rework the drm_framebuffer_funcs->dirty hook wire-up, see above.

 Contact: Noralf Trønnes, Daniel Vetter

 AMD DC Display Driver
 ---------------------

 AMD DC is the display driver for AMD devices starting with Vega. There has been
 a bunch of progress cleaning it up but there's still plenty of work to be done.

 See drivers/gpu/drm/amd/display/TODO for tasks.

 Contact: Harry Wentland, Alex Deucher

 Outside DRM
 ===========
	.. _todo:

	=========
	TODO list
	=========

	This section contains a list of smaller janitorial tasks in the kernel DRM
	graphics subsystem useful as newbie projects. Or for slow rainy days.

	Subsystem-wide refactorings
	===========================

	De-midlayer drivers
	-------------------

	With the recent ``drm_bus`` cleanup patches for 3.17 it is no longer required
	to have a ``drm_bus`` structure set up. Drivers can directly set up the
	``drm_device`` structure instead of relying on bus methods in ``drm_usb.c``
	and ``drm_pci.c``. The goal is to get rid of the driver's ``->load`` /
	``->unload`` callbacks and open-code the load/unload sequence properly, using
	the new two-stage ``drm_device`` setup/teardown.

	Once all existing drivers are converted we can also remove those bus support
	files for USB and platform devices.

	All you need is a GPU for a non-converted driver (currently almost all of
	them, but also all the virtual ones used by KVM, so everyone qualifies).

	Contact: Daniel Vetter, Thierry Reding, respective driver maintainers

	Switch from reference/unreference to get/put
	--------------------------------------------

	For some reason DRM core uses ``reference``/``unreference`` suffixes for
	refcounting functions, but kernel uses ``get``/``put`` (e.g.
	``kref_get``/``put()``). It would be good to switch over for consistency, and
	it's shorter. Needs to be done in 3 steps for each pair of functions:

	* Create new ``get``/``put`` functions, define the old names as compatibility
	wrappers
	* Switch over each file/driver using a cocci-generated spatch.
	* Once all users of the old names are gone, remove them.

	This way drivers/patches in the progress of getting merged won't break.

	Contact: Daniel Vetter

	Convert existing KMS drivers to atomic modesetting
	--------------------------------------------------

	3.19 has the atomic modeset interfaces and helpers, so drivers can now be
	converted over. Modern compositors like Wayland or Surfaceflinger on Android
	really want an atomic modeset interface, so this is all about the bright
	future.

	There is a conversion guide for atomic and all you need is a GPU for a
	non-converted driver (again virtual HW drivers for KVM are still all
	suitable).

	As part of this drivers also need to convert to universal plane (which means
	exposing primary & cursor as proper plane objects). But that's much easier to
	do by directly using the new atomic helper driver callbacks.

	Contact: Daniel Vetter, respective driver maintainers

	Clean up the clipped coordination confusion around planes
	---------------------------------------------------------

	We have a helper to get this right with drm_plane_helper_check_update(), but
	it's not consistently used. This should be fixed, preferrably in the atomic
	helpers (and drivers then moved over to clipped coordinates). Probably the
	helper should also be moved from drm_plane_helper.c to the atomic helpers, to
	avoid confusion - the other helpers in that file are all deprecated legacy
	helpers.

	Contact: Ville Syrjälä, Daniel Vetter, driver maintainers

	Convert early atomic drivers to async commit helpers
	----------------------------------------------------

	For the first year the atomic modeset helpers didn't support asynchronous /
	nonblocking commits, and every driver had to hand-roll them. This is fixed
	now, but there's still a pile of existing drivers that easily could be
	converted over to the new infrastructure.

	One issue with the helpers is that they require that drivers handle completion
	events for atomic commits correctly. But fixing these bugs is good anyway.

	Contact: Daniel Vetter, respective driver maintainers

	Better manual-upload support for atomic
	---------------------------------------

	This would be especially useful for tinydrm:

	- Add a struct drm_rect dirty_clip to drm_crtc_state. When duplicating the
	crtc state, clear that to the max values, x/y = 0 and w/h = MAX_INT, in
	__drm_atomic_helper_crtc_duplicate_state().

	- Move tinydrm_merge_clips into drm_framebuffer.c, dropping the tinydrm\_
	prefix ofc and using drm_fb\_. drm_framebuffer.c makes sense since this
	is a function useful to implement the fb->dirty function.

	- Create a new drm_fb_dirty function which does essentially what e.g.
	mipi_dbi_fb_dirty does. You can use e.g. drm_atomic_helper_update_plane as the
	template. But instead of doing a simple full-screen plane update, this new
	helper also sets crtc_state->dirty_clip to the right coordinates. And of
	course it needs to check whether the fb is actually active (and maybe where),
	so there's some book-keeping involved. There's also some good fun involved in
	scaling things appropriately. For that case we might simply give up and
	declare the entire area covered by the plane as dirty.

	Contact: Noralf Trønnes, Daniel Vetter

	Fallout from atomic KMS
	-----------------------

	``drm_atomic_helper.c`` provides a batch of functions which implement legacy
	IOCTLs on top of the new atomic driver interface. Which is really nice for
	gradual conversion of drivers, but unfortunately the semantic mismatches are
	a bit too severe. So there's some follow-up work to adjust the function
	interfaces to fix these issues:

	* atomic needs the lock acquire context. At the moment that's passed around
	implicitly with some horrible hacks, and it's also allocate with
	``GFP_NOFAIL`` behind the scenes. All legacy paths need to start allocating
	the acquire context explicitly on stack and then also pass it down into
	drivers explicitly so that the legacy-on-atomic functions can use them.

	Except for some driver code this is done.

	* A bunch of the vtable hooks are now in the wrong place: DRM has a split
	between core vfunc tables (named ``drm_foo_funcs``), which are used to
	implement the userspace ABI. And then there's the optional hooks for the
	helper libraries (name ``drm_foo_helper_funcs``), which are purely for
	internal use. Some of these hooks should be move from ``_funcs`` to
	``_helper_funcs`` since they are not part of the core ABI. There's a
	``FIXME`` comment in the kerneldoc for each such case in ``drm_crtc.h``.

	* There's a new helper ``drm_atomic_helper_best_encoder()`` which could be
	used by all atomic drivers which don't select the encoder for a given
	connector at runtime. That's almost all of them, and would allow us to get
	rid of a lot of ``best_encoder`` boilerplate in drivers.

	This was almost done, but new drivers added a few more cases again.

	Contact: Daniel Vetter

	Get rid of dev->struct_mutex from GEM drivers
	---------------------------------------------

	``dev->struct_mutex`` is the Big DRM Lock from legacy days and infested
	everything. Nowadays in modern drivers the only bit where it's mandatory is
	serializing GEM buffer object destruction. Which unfortunately means drivers
	have to keep track of that lock and either call ``unreference`` or
	``unreference_locked`` depending upon context.

	Core GEM doesn't have a need for ``struct_mutex`` any more since kernel 4.8,
	and there's a ``gem_free_object_unlocked`` callback for any drivers which are
	entirely ``struct_mutex`` free.

	For drivers that need ``struct_mutex`` it should be replaced with a driver-
	private lock. The tricky part is the BO free functions, since those can't
	reliably take that lock any more. Instead state needs to be protected with
	suitable subordinate locks or some cleanup work pushed to a worker thread. For
	performance-critical drivers it might also be better to go with a more
	fine-grained per-buffer object and per-context lockings scheme. Currently the
	following drivers still use ``struct_mutex``: ``msm``, ``omapdrm`` and
	``udl``.

	Contact: Daniel Vetter, respective driver maintainers

	Convert instances of dev_info/dev_err/dev_warn to their DRM_DEV_* equivalent
	----------------------------------------------------------------------------

	For drivers which could have multiple instances, it is necessary to
	differentiate between which is which in the logs. Since DRM_INFO/WARN/ERROR
	don't do this, drivers used dev_info/warn/err to make this differentiation. We
	now have DRM_DEV_* variants of the drm print macros, so we can start to convert
	those drivers back to using drm-formwatted specific log messages.

	Contact: Sean Paul, Maintainer of the driver you plan to convert

	Core refactorings
	=================

	Clean up the DRM header mess
	----------------------------

	Currently the DRM subsystem has only one global header, ``drmP.h``. This is
	used both for functions exported to helper libraries and drivers and functions
	only used internally in the ``drm.ko`` module. The goal would be to move all
	header declarations not needed outside of ``drm.ko`` into
	``drivers/gpu/drm/drm_*_internal.h`` header files. ``EXPORT_SYMBOL`` also
	needs to be dropped for these functions.

	This would nicely tie in with the below task to create kerneldoc after the API
	is cleaned up. Or with the "hide legacy cruft better" task.

	Note that this is well in progress, but ``drmP.h`` is still huge. The updated
	plan is to switch to per-file driver API headers, which will also structure
	the kerneldoc better. This should also allow more fine-grained ``#include``
	directives.

	In the end no .c file should need to include ``drmP.h`` anymore.

	Contact: Daniel Vetter

	Add missing kerneldoc for exported functions
	--------------------------------------------

	The DRM reference documentation is still lacking kerneldoc in a few areas. The
	task would be to clean up interfaces like moving functions around between
	files to better group them and improving the interfaces like dropping return
	values for functions that never fail. Then write kerneldoc for all exported
	functions and an overview section and integrate it all into the drm book.

	See https://dri.freedesktop.org/docs/drm/ for what's there already.

	Contact: Daniel Vetter

	Hide legacy cruft better
	------------------------

	Way back DRM supported only drivers which shadow-attached to PCI devices with
	userspace or fbdev drivers setting up outputs. Modern DRM drivers take charge
	of the entire device, you can spot them with the DRIVER_MODESET flag.

	Unfortunately there's still large piles of legacy code around which needs to
	be hidden so that driver writers don't accidentally end up using it. And to
	prevent security issues in those legacy IOCTLs from being exploited on modern
	drivers. This has multiple possible subtasks:

	* Extract support code for legacy features into a ``drm-legacy.ko`` kernel
	module and compile it only when one of the legacy drivers is enabled.

	This is mostly done, the only thing left is to split up ``drm_irq.c`` into
	legacy cruft and the parts needed by modern KMS drivers.

	Contact: Daniel Vetter

	Make panic handling work
	------------------------

	This is a really varied tasks with lots of little bits and pieces:

	* The panic path can't be tested currently, leading to constant breaking. The
	main issue here is that panics can be triggered from hardirq contexts and
	hence all panic related callback can run in hardirq context. It would be
	awesome if we could test at least the fbdev helper code and driver code by
	e.g. trigger calls through drm debugfs files. hardirq context could be
	achieved by using an IPI to the local processor.

	* There's a massive confusion of different panic handlers. DRM fbdev emulation
	helpers have one, but on top of that the fbcon code itself also has one. We
	need to make sure that they stop fighting over each another.

	* ``drm_can_sleep()`` is a mess. It hides real bugs in normal operations and
	isn't a full solution for panic paths. We need to make sure that it only
	returns true if there's a panic going on for real, and fix up all the
	fallout.

	* The panic handler must never sleep, which also means it can't ever
	``mutex_lock()``. Also it can't grab any other lock unconditionally, not
	even spinlocks (because NMI and hardirq can panic too). We need to either
	make sure to not call such paths, or trylock everything. Really tricky.

	* For the above locking troubles reasons it's pretty much impossible to
	attempt a synchronous modeset from panic handlers. The only thing we could
	try to achive is an atomic ``set_base`` of the primary plane, and hope that
	it shows up. Everything else probably needs to be delayed to some worker or
	something else which happens later on. Otherwise it just kills the box
	harder, prevent the panic from going out on e.g. netconsole.

	* There's also proposal for a simplied DRM console instead of the full-blown
	fbcon and DRM fbdev emulation. Any kind of panic handling tricks should
	obviously work for both console, in case we ever get kmslog merged.

	Contact: Daniel Vetter

	Clean up the debugfs support
	----------------------------

	There's a bunch of issues with it:

	- The drm_info_list ->show() function doesn't even bother to cast to the drm
	structure for you. This is lazy.

	- We probably want to have some support for debugfs files on crtc/connectors and
	maybe other kms objects directly in core. There's even drm_print support in
	the funcs for these objects to dump kms state, so it's all there. And then the
	->show() functions should obviously give you a pointer to the right object.

	- The drm_info_list stuff is centered on drm_minor instead of drm_device. For
	anything we want to print drm_device (or maybe drm_file) is the right thing.

	- The drm_driver->debugfs_init hooks we have is just an artifact of the old
	midlayered load sequence. DRM debugfs should work more like sysfs, where you
	can create properties/files for an object anytime you want, and the core
	takes care of publishing/unpuplishing all the files at register/unregister
	time. Drivers shouldn't need to worry about these technicalities, and fixing
	this (together with the drm_minor->drm_device move) would allow us to remove
	debugfs_init.

	Contact: Daniel Vetter

	KMS cleanups
	------------

	Some of these date from the very introduction of KMS in 2008 ...

	- drm_mode_config.crtc_idr is misnamed, since it contains all KMS object. Should
	be renamed to drm_mode_config.object_idr.

	- drm_display_mode doesn't need to be derived from drm_mode_object. That's
	leftovers from older (never merged into upstream) KMS designs where modes
	where set using their ID, including support to add/remove modes.

	Better Testing
	==============

	Enable trinity for DRM
	----------------------

	And fix up the fallout. Should be really interesting ...

	Make KMS tests in i-g-t generic
	-------------------------------

	The i915 driver team maintains an extensive testsuite for the i915 DRM driver,
	including tons of testcases for corner-cases in the modesetting API. It would
	be awesome if those tests (at least the ones not relying on Intel-specific GEM
	features) could be made to run on any KMS driver.

	Basic work to run i-g-t tests on non-i915 is done, what's now missing is mass-
	converting things over. For modeset tests we also first need a bit of
	infrastructure to use dumb buffers for untiled buffers, to be able to run all
	the non-i915 specific modeset tests.

	Contact: Daniel Vetter

	Create a virtual KMS driver for testing (vkms)
	----------------------------------------------

	With all the latest helpers it should be fairly simple to create a virtual KMS
	driver useful for testing, or for running X or similar on headless machines
	(to be able to still use the GPU). This would be similar to vgem, but aimed at
	the modeset side.

	Once the basics are there there's tons of possibilities to extend it.

	Contact: Daniel Vetter

	Driver Specific
	===============

	tinydrm
	-------

	Tinydrm is the helper driver for really simple fb drivers. The goal is to make
	those drivers as simple as possible, so lots of room for refactoring:

	- backlight helpers, probably best to put them into a new drm_backlight.c.
	This is because drivers/video is de-facto unmaintained. We could also
	move drivers/video/backlight to drivers/gpu/backlight and take it all
	over within drm-misc, but that's more work. Backlight helpers require a fair
	bit of reworking and refactoring. A simple example is the enabling of a backlight.
	Tinydrm has helpers for this. It would be good if other drivers can also use the
	helper. However, there are various cases we need to consider i.e different
	drivers seem to have different ways of enabling/disabling a backlight.
	We also need to consider the backlight drivers (like gpio_backlight). The situation
	is further complicated by the fact that the backlight is tied to fbdev
	via fb_notifier_callback() which has complicated logic. For further details, refer
	to the following discussion thread:
	https://groups.google.com/forum/#!topic/outreachy-kernel/8rBe30lwtdA

	- spi helpers, probably best put into spi core/helper code. Thierry said
	the spi maintainer is fast&reactive, so shouldn't be a big issue.

	- extract the mipi-dbi helper (well, the non-tinydrm specific parts at
	least) into a separate helper, like we have for mipi-dsi already. Or follow
	one of the ideas for having a shared dsi/dbi helper, abstracting away the
	transport details more.

	- tinydrm_lastclose could be drm_fb_helper_lastclose. Only thing we need
	for that is to store the drm_fb_helper pointer somewhere in
	drm_device->mode_config. And then we could roll that out to all the
	drivers.

	- tinydrm_gem_cma_prime_import_sg_table should probably go into the cma
	helpers, as a _vmapped variant (since not every driver needs the vmap).
	And tinydrm_gem_cma_free_object could the be merged into
	drm_gem_cma_free_object().

	- tinydrm_fb_create we could move into drm_simple_pipe, only need to add
	the fb_create hook to drm_simple_pipe_funcs, which would again simplify a
	bunch of things (since it gives you a one-stop vfunc for simple drivers).

	- Quick aside: The unregister devm stuff is kinda getting the lifetimes of
	a drm_device wrong. Doesn't matter, since everyone else gets it wrong
	too :-)

	- With the fbdev pointer in dev->mode_config we could also make
	suspend/resume helpers entirely generic, at least if we add a
	dev->mode_config.suspend_state. We could even provide a generic pm_ops
	structure with those.

	- also rework the drm_framebuffer_funcs->dirty hook wire-up, see above.

	Contact: Noralf Trønnes, Daniel Vetter

	AMD DC Display Driver
	---------------------

	AMD DC is the display driver for AMD devices starting with Vega. There has been
	a bunch of progress cleaning it up but there's still plenty of work to be done.

	See drivers/gpu/drm/amd/display/TODO for tasks.

	Contact: Harry Wentland, Alex Deucher

	Outside DRM
	===========