| /* |
| * Mars MR97310A library |
| * |
| * The original mr97310a driver, which supported the Aiptek Pencam VGA+, is |
| * Copyright (C) 2009 Kyle Guinn <elyk03@gmail.com> |
| * |
| * Support for the MR97310A cameras in addition to the Aiptek Pencam VGA+ |
| * and for the routines for detecting and classifying these various cameras, |
| * is Copyright (C) 2009 Theodore Kilgore <kilgota@auburn.edu> |
| * |
| * Support for the control settings for the CIF cameras is |
| * Copyright (C) 2009 Hans de Goede <hdegoede@redhat.com> and |
| * Thomas Kaiser <thomas@kaiser-linux.li> |
| * |
| * Support for the control settings for the VGA cameras is |
| * Copyright (C) 2009 Theodore Kilgore <kilgota@auburn.edu> |
| * |
| * Several previously unsupported cameras are owned and have been tested by |
| * Hans de Goede <hdegoede@redhat.com> and |
| * Thomas Kaiser <thomas@kaiser-linux.li> and |
| * Theodore Kilgore <kilgota@auburn.edu> and |
| * Edmond Rodriguez <erodrig_97@yahoo.com> and |
| * Aurelien Jacobs <aurel@gnuage.org> |
| * |
| * The MR97311A support in gspca/mars.c has been helpful in understanding some |
| * of the registers in these cameras. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #define MODULE_NAME "mr97310a" |
| |
| #include "gspca.h" |
| |
| #define CAM_TYPE_CIF 0 |
| #define CAM_TYPE_VGA 1 |
| |
| #define MR97310A_BRIGHTNESS_DEFAULT 0 |
| |
| #define MR97310A_EXPOSURE_MIN 0 |
| #define MR97310A_EXPOSURE_MAX 4095 |
| #define MR97310A_EXPOSURE_DEFAULT 1000 |
| |
| #define MR97310A_GAIN_MIN 0 |
| #define MR97310A_GAIN_MAX 31 |
| #define MR97310A_GAIN_DEFAULT 25 |
| |
| #define MR97310A_CONTRAST_MIN 0 |
| #define MR97310A_CONTRAST_MAX 31 |
| #define MR97310A_CONTRAST_DEFAULT 23 |
| |
| #define MR97310A_CS_GAIN_MIN 0 |
| #define MR97310A_CS_GAIN_MAX 0x7ff |
| #define MR97310A_CS_GAIN_DEFAULT 0x110 |
| |
| #define MR97310A_MIN_CLOCKDIV_MIN 3 |
| #define MR97310A_MIN_CLOCKDIV_MAX 8 |
| #define MR97310A_MIN_CLOCKDIV_DEFAULT 3 |
| |
| MODULE_AUTHOR("Kyle Guinn <elyk03@gmail.com>," |
| "Theodore Kilgore <kilgota@auburn.edu>"); |
| MODULE_DESCRIPTION("GSPCA/Mars-Semi MR97310A USB Camera Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| /* global parameters */ |
| static int force_sensor_type = -1; |
| module_param(force_sensor_type, int, 0644); |
| MODULE_PARM_DESC(force_sensor_type, "Force sensor type (-1 (auto), 0 or 1)"); |
| |
| /* specific webcam descriptor */ |
| struct sd { |
| struct gspca_dev gspca_dev; /* !! must be the first item */ |
| u8 sof_read; |
| u8 cam_type; /* 0 is CIF and 1 is VGA */ |
| u8 sensor_type; /* We use 0 and 1 here, too. */ |
| u8 do_lcd_stop; |
| u8 adj_colors; |
| |
| int brightness; |
| u16 exposure; |
| u32 gain; |
| u8 contrast; |
| u8 min_clockdiv; |
| }; |
| |
| struct sensor_w_data { |
| u8 reg; |
| u8 flags; |
| u8 data[16]; |
| int len; |
| }; |
| |
| static void sd_stopN(struct gspca_dev *gspca_dev); |
| static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); |
| static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val); |
| static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val); |
| static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val); |
| static int sd_setmin_clockdiv(struct gspca_dev *gspca_dev, __s32 val); |
| static int sd_getmin_clockdiv(struct gspca_dev *gspca_dev, __s32 *val); |
| static void setbrightness(struct gspca_dev *gspca_dev); |
| static void setexposure(struct gspca_dev *gspca_dev); |
| static void setgain(struct gspca_dev *gspca_dev); |
| static void setcontrast(struct gspca_dev *gspca_dev); |
| |
| /* V4L2 controls supported by the driver */ |
| static const struct ctrl sd_ctrls[] = { |
| /* Separate brightness control description for Argus QuickClix as it has |
| * different limits from the other mr97310a cameras, and separate gain |
| * control for Sakar CyberPix camera. */ |
| { |
| #define NORM_BRIGHTNESS_IDX 0 |
| { |
| .id = V4L2_CID_BRIGHTNESS, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Brightness", |
| .minimum = -254, |
| .maximum = 255, |
| .step = 1, |
| .default_value = MR97310A_BRIGHTNESS_DEFAULT, |
| .flags = 0, |
| }, |
| .set = sd_setbrightness, |
| .get = sd_getbrightness, |
| }, |
| { |
| #define ARGUS_QC_BRIGHTNESS_IDX 1 |
| { |
| .id = V4L2_CID_BRIGHTNESS, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Brightness", |
| .minimum = 0, |
| .maximum = 15, |
| .step = 1, |
| .default_value = MR97310A_BRIGHTNESS_DEFAULT, |
| .flags = 0, |
| }, |
| .set = sd_setbrightness, |
| .get = sd_getbrightness, |
| }, |
| { |
| #define EXPOSURE_IDX 2 |
| { |
| .id = V4L2_CID_EXPOSURE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Exposure", |
| .minimum = MR97310A_EXPOSURE_MIN, |
| .maximum = MR97310A_EXPOSURE_MAX, |
| .step = 1, |
| .default_value = MR97310A_EXPOSURE_DEFAULT, |
| .flags = 0, |
| }, |
| .set = sd_setexposure, |
| .get = sd_getexposure, |
| }, |
| { |
| #define GAIN_IDX 3 |
| { |
| .id = V4L2_CID_GAIN, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Gain", |
| .minimum = MR97310A_GAIN_MIN, |
| .maximum = MR97310A_GAIN_MAX, |
| .step = 1, |
| .default_value = MR97310A_GAIN_DEFAULT, |
| .flags = 0, |
| }, |
| .set = sd_setgain, |
| .get = sd_getgain, |
| }, |
| { |
| #define SAKAR_CS_GAIN_IDX 4 |
| { |
| .id = V4L2_CID_GAIN, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Gain", |
| .minimum = MR97310A_CS_GAIN_MIN, |
| .maximum = MR97310A_CS_GAIN_MAX, |
| .step = 1, |
| .default_value = MR97310A_CS_GAIN_DEFAULT, |
| .flags = 0, |
| }, |
| .set = sd_setgain, |
| .get = sd_getgain, |
| }, |
| { |
| #define CONTRAST_IDX 5 |
| { |
| .id = V4L2_CID_CONTRAST, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Contrast", |
| .minimum = MR97310A_CONTRAST_MIN, |
| .maximum = MR97310A_CONTRAST_MAX, |
| .step = 1, |
| .default_value = MR97310A_CONTRAST_DEFAULT, |
| .flags = 0, |
| }, |
| .set = sd_setcontrast, |
| .get = sd_getcontrast, |
| }, |
| { |
| #define MIN_CLOCKDIV_IDX 6 |
| { |
| .id = V4L2_CID_PRIVATE_BASE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Minimum Clock Divider", |
| .minimum = MR97310A_MIN_CLOCKDIV_MIN, |
| .maximum = MR97310A_MIN_CLOCKDIV_MAX, |
| .step = 1, |
| .default_value = MR97310A_MIN_CLOCKDIV_DEFAULT, |
| .flags = 0, |
| }, |
| .set = sd_setmin_clockdiv, |
| .get = sd_getmin_clockdiv, |
| }, |
| }; |
| |
| static const struct v4l2_pix_format vga_mode[] = { |
| {160, 120, V4L2_PIX_FMT_MR97310A, V4L2_FIELD_NONE, |
| .bytesperline = 160, |
| .sizeimage = 160 * 120, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 4}, |
| {176, 144, V4L2_PIX_FMT_MR97310A, V4L2_FIELD_NONE, |
| .bytesperline = 176, |
| .sizeimage = 176 * 144, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 3}, |
| {320, 240, V4L2_PIX_FMT_MR97310A, V4L2_FIELD_NONE, |
| .bytesperline = 320, |
| .sizeimage = 320 * 240, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 2}, |
| {352, 288, V4L2_PIX_FMT_MR97310A, V4L2_FIELD_NONE, |
| .bytesperline = 352, |
| .sizeimage = 352 * 288, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 1}, |
| {640, 480, V4L2_PIX_FMT_MR97310A, V4L2_FIELD_NONE, |
| .bytesperline = 640, |
| .sizeimage = 640 * 480, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .priv = 0}, |
| }; |
| |
| /* the bytes to write are in gspca_dev->usb_buf */ |
| static int mr_write(struct gspca_dev *gspca_dev, int len) |
| { |
| int rc; |
| |
| rc = usb_bulk_msg(gspca_dev->dev, |
| usb_sndbulkpipe(gspca_dev->dev, 4), |
| gspca_dev->usb_buf, len, NULL, 500); |
| if (rc < 0) |
| pr_err("reg write [%02x] error %d\n", |
| gspca_dev->usb_buf[0], rc); |
| return rc; |
| } |
| |
| /* the bytes are read into gspca_dev->usb_buf */ |
| static int mr_read(struct gspca_dev *gspca_dev, int len) |
| { |
| int rc; |
| |
| rc = usb_bulk_msg(gspca_dev->dev, |
| usb_rcvbulkpipe(gspca_dev->dev, 3), |
| gspca_dev->usb_buf, len, NULL, 500); |
| if (rc < 0) |
| pr_err("reg read [%02x] error %d\n", |
| gspca_dev->usb_buf[0], rc); |
| return rc; |
| } |
| |
| static int sensor_write_reg(struct gspca_dev *gspca_dev, u8 reg, u8 flags, |
| const u8 *data, int len) |
| { |
| gspca_dev->usb_buf[0] = 0x1f; |
| gspca_dev->usb_buf[1] = flags; |
| gspca_dev->usb_buf[2] = reg; |
| memcpy(gspca_dev->usb_buf + 3, data, len); |
| |
| return mr_write(gspca_dev, len + 3); |
| } |
| |
| static int sensor_write_regs(struct gspca_dev *gspca_dev, |
| const struct sensor_w_data *data, int len) |
| { |
| int i, rc; |
| |
| for (i = 0; i < len; i++) { |
| rc = sensor_write_reg(gspca_dev, data[i].reg, data[i].flags, |
| data[i].data, data[i].len); |
| if (rc < 0) |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int sensor_write1(struct gspca_dev *gspca_dev, u8 reg, u8 data) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| u8 buf, confirm_reg; |
| int rc; |
| |
| buf = data; |
| if (sd->cam_type == CAM_TYPE_CIF) { |
| rc = sensor_write_reg(gspca_dev, reg, 0x01, &buf, 1); |
| confirm_reg = sd->sensor_type ? 0x13 : 0x11; |
| } else { |
| rc = sensor_write_reg(gspca_dev, reg, 0x00, &buf, 1); |
| confirm_reg = 0x11; |
| } |
| if (rc < 0) |
| return rc; |
| |
| buf = 0x01; |
| rc = sensor_write_reg(gspca_dev, confirm_reg, 0x00, &buf, 1); |
| if (rc < 0) |
| return rc; |
| |
| return 0; |
| } |
| |
| static int cam_get_response16(struct gspca_dev *gspca_dev, u8 reg, int verbose) |
| { |
| int err_code; |
| |
| gspca_dev->usb_buf[0] = reg; |
| err_code = mr_write(gspca_dev, 1); |
| if (err_code < 0) |
| return err_code; |
| |
| err_code = mr_read(gspca_dev, 16); |
| if (err_code < 0) |
| return err_code; |
| |
| if (verbose) |
| PDEBUG(D_PROBE, "Register: %02x reads %02x%02x%02x", reg, |
| gspca_dev->usb_buf[0], |
| gspca_dev->usb_buf[1], |
| gspca_dev->usb_buf[2]); |
| |
| return 0; |
| } |
| |
| static int zero_the_pointer(struct gspca_dev *gspca_dev) |
| { |
| __u8 *data = gspca_dev->usb_buf; |
| int err_code; |
| u8 status = 0; |
| int tries = 0; |
| |
| err_code = cam_get_response16(gspca_dev, 0x21, 0); |
| if (err_code < 0) |
| return err_code; |
| |
| data[0] = 0x19; |
| data[1] = 0x51; |
| err_code = mr_write(gspca_dev, 2); |
| if (err_code < 0) |
| return err_code; |
| |
| err_code = cam_get_response16(gspca_dev, 0x21, 0); |
| if (err_code < 0) |
| return err_code; |
| |
| data[0] = 0x19; |
| data[1] = 0xba; |
| err_code = mr_write(gspca_dev, 2); |
| if (err_code < 0) |
| return err_code; |
| |
| err_code = cam_get_response16(gspca_dev, 0x21, 0); |
| if (err_code < 0) |
| return err_code; |
| |
| data[0] = 0x19; |
| data[1] = 0x00; |
| err_code = mr_write(gspca_dev, 2); |
| if (err_code < 0) |
| return err_code; |
| |
| err_code = cam_get_response16(gspca_dev, 0x21, 0); |
| if (err_code < 0) |
| return err_code; |
| |
| data[0] = 0x19; |
| data[1] = 0x00; |
| err_code = mr_write(gspca_dev, 2); |
| if (err_code < 0) |
| return err_code; |
| |
| while (status != 0x0a && tries < 256) { |
| err_code = cam_get_response16(gspca_dev, 0x21, 0); |
| status = data[0]; |
| tries++; |
| if (err_code < 0) |
| return err_code; |
| } |
| if (status != 0x0a) |
| PDEBUG(D_ERR, "status is %02x", status); |
| |
| tries = 0; |
| while (tries < 4) { |
| data[0] = 0x19; |
| data[1] = 0x00; |
| err_code = mr_write(gspca_dev, 2); |
| if (err_code < 0) |
| return err_code; |
| |
| err_code = cam_get_response16(gspca_dev, 0x21, 0); |
| status = data[0]; |
| tries++; |
| if (err_code < 0) |
| return err_code; |
| } |
| |
| data[0] = 0x19; |
| err_code = mr_write(gspca_dev, 1); |
| if (err_code < 0) |
| return err_code; |
| |
| err_code = mr_read(gspca_dev, 16); |
| if (err_code < 0) |
| return err_code; |
| |
| return 0; |
| } |
| |
| static int stream_start(struct gspca_dev *gspca_dev) |
| { |
| gspca_dev->usb_buf[0] = 0x01; |
| gspca_dev->usb_buf[1] = 0x01; |
| return mr_write(gspca_dev, 2); |
| } |
| |
| static void stream_stop(struct gspca_dev *gspca_dev) |
| { |
| gspca_dev->usb_buf[0] = 0x01; |
| gspca_dev->usb_buf[1] = 0x00; |
| if (mr_write(gspca_dev, 2) < 0) |
| PDEBUG(D_ERR, "Stream Stop failed"); |
| } |
| |
| static void lcd_stop(struct gspca_dev *gspca_dev) |
| { |
| gspca_dev->usb_buf[0] = 0x19; |
| gspca_dev->usb_buf[1] = 0x54; |
| if (mr_write(gspca_dev, 2) < 0) |
| PDEBUG(D_ERR, "LCD Stop failed"); |
| } |
| |
| static int isoc_enable(struct gspca_dev *gspca_dev) |
| { |
| gspca_dev->usb_buf[0] = 0x00; |
| gspca_dev->usb_buf[1] = 0x4d; /* ISOC transferring enable... */ |
| return mr_write(gspca_dev, 2); |
| } |
| |
| /* This function is called at probe time */ |
| static int sd_config(struct gspca_dev *gspca_dev, |
| const struct usb_device_id *id) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| struct cam *cam; |
| int gain_default = MR97310A_GAIN_DEFAULT; |
| int err_code; |
| |
| cam = &gspca_dev->cam; |
| cam->cam_mode = vga_mode; |
| cam->nmodes = ARRAY_SIZE(vga_mode); |
| sd->do_lcd_stop = 0; |
| |
| /* Several of the supported CIF cameras share the same USB ID but |
| * require different initializations and different control settings. |
| * The same is true of the VGA cameras. Therefore, we are forced |
| * to start the initialization process in order to determine which |
| * camera is present. Some of the supported cameras require the |
| * memory pointer to be set to 0 as the very first item of business |
| * or else they will not stream. So we do that immediately. |
| */ |
| err_code = zero_the_pointer(gspca_dev); |
| if (err_code < 0) |
| return err_code; |
| |
| err_code = stream_start(gspca_dev); |
| if (err_code < 0) |
| return err_code; |
| |
| /* Now, the query for sensor type. */ |
| err_code = cam_get_response16(gspca_dev, 0x07, 1); |
| if (err_code < 0) |
| return err_code; |
| |
| if (id->idProduct == 0x0110 || id->idProduct == 0x010e) { |
| sd->cam_type = CAM_TYPE_CIF; |
| cam->nmodes--; |
| /* |
| * All but one of the known CIF cameras share the same USB ID, |
| * but two different init routines are in use, and the control |
| * settings are different, too. We need to detect which camera |
| * of the two known varieties is connected! |
| * |
| * A list of known CIF cameras follows. They all report either |
| * 0200 for type 0 or 0300 for type 1. |
| * If you have another to report, please do |
| * |
| * Name sd->sensor_type reported by |
| * |
| * Sakar 56379 Spy-shot 0 T. Kilgore |
| * Innovage 0 T. Kilgore |
| * Vivitar Mini 0 H. De Goede |
| * Vivitar Mini 0 E. Rodriguez |
| * Vivitar Mini 1 T. Kilgore |
| * Elta-Media 8212dc 1 T. Kaiser |
| * Philips dig. keych. 1 T. Kilgore |
| * Trust Spyc@m 100 1 A. Jacobs |
| */ |
| switch (gspca_dev->usb_buf[0]) { |
| case 2: |
| sd->sensor_type = 0; |
| break; |
| case 3: |
| sd->sensor_type = 1; |
| break; |
| default: |
| pr_err("Unknown CIF Sensor id : %02x\n", |
| gspca_dev->usb_buf[1]); |
| return -ENODEV; |
| } |
| PDEBUG(D_PROBE, "MR97310A CIF camera detected, sensor: %d", |
| sd->sensor_type); |
| } else { |
| sd->cam_type = CAM_TYPE_VGA; |
| |
| /* |
| * Here is a table of the responses to the query for sensor |
| * type, from the known MR97310A VGA cameras. Six different |
| * cameras of which five share the same USB ID. |
| * |
| * Name gspca_dev->usb_buf[] sd->sensor_type |
| * sd->do_lcd_stop |
| * Aiptek Pencam VGA+ 0300 0 1 |
| * ION digital 0300 0 1 |
| * Argus DC-1620 0450 1 0 |
| * Argus QuickClix 0420 1 1 |
| * Sakar 77379 Digital 0350 0 1 |
| * Sakar 1638x CyberPix 0120 0 2 |
| * |
| * Based upon these results, we assume default settings |
| * and then correct as necessary, as follows. |
| * |
| */ |
| |
| sd->sensor_type = 1; |
| sd->do_lcd_stop = 0; |
| sd->adj_colors = 0; |
| if (gspca_dev->usb_buf[0] == 0x01) { |
| sd->sensor_type = 2; |
| } else if ((gspca_dev->usb_buf[0] != 0x03) && |
| (gspca_dev->usb_buf[0] != 0x04)) { |
| pr_err("Unknown VGA Sensor id Byte 0: %02x\n", |
| gspca_dev->usb_buf[0]); |
| pr_err("Defaults assumed, may not work\n"); |
| pr_err("Please report this\n"); |
| } |
| /* Sakar Digital color needs to be adjusted. */ |
| if ((gspca_dev->usb_buf[0] == 0x03) && |
| (gspca_dev->usb_buf[1] == 0x50)) |
| sd->adj_colors = 1; |
| if (gspca_dev->usb_buf[0] == 0x04) { |
| sd->do_lcd_stop = 1; |
| switch (gspca_dev->usb_buf[1]) { |
| case 0x50: |
| sd->sensor_type = 0; |
| PDEBUG(D_PROBE, "sensor_type corrected to 0"); |
| break; |
| case 0x20: |
| /* Nothing to do here. */ |
| break; |
| default: |
| pr_err("Unknown VGA Sensor id Byte 1: %02x\n", |
| gspca_dev->usb_buf[1]); |
| pr_err("Defaults assumed, may not work\n"); |
| pr_err("Please report this\n"); |
| } |
| } |
| PDEBUG(D_PROBE, "MR97310A VGA camera detected, sensor: %d", |
| sd->sensor_type); |
| } |
| /* Stop streaming as we've started it only to probe the sensor type. */ |
| sd_stopN(gspca_dev); |
| |
| if (force_sensor_type != -1) { |
| sd->sensor_type = !!force_sensor_type; |
| PDEBUG(D_PROBE, "Forcing sensor type to: %d", |
| sd->sensor_type); |
| } |
| |
| /* Setup controls depending on camera type */ |
| if (sd->cam_type == CAM_TYPE_CIF) { |
| /* No brightness for sensor_type 0 */ |
| if (sd->sensor_type == 0) |
| gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX) | |
| (1 << ARGUS_QC_BRIGHTNESS_IDX) | |
| (1 << CONTRAST_IDX) | |
| (1 << SAKAR_CS_GAIN_IDX); |
| else |
| gspca_dev->ctrl_dis = (1 << ARGUS_QC_BRIGHTNESS_IDX) | |
| (1 << CONTRAST_IDX) | |
| (1 << SAKAR_CS_GAIN_IDX) | |
| (1 << MIN_CLOCKDIV_IDX); |
| } else { |
| /* All controls need to be disabled if VGA sensor_type is 0 */ |
| if (sd->sensor_type == 0) |
| gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX) | |
| (1 << ARGUS_QC_BRIGHTNESS_IDX) | |
| (1 << EXPOSURE_IDX) | |
| (1 << GAIN_IDX) | |
| (1 << CONTRAST_IDX) | |
| (1 << SAKAR_CS_GAIN_IDX) | |
| (1 << MIN_CLOCKDIV_IDX); |
| else if (sd->sensor_type == 2) { |
| gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX) | |
| (1 << ARGUS_QC_BRIGHTNESS_IDX) | |
| (1 << GAIN_IDX) | |
| (1 << MIN_CLOCKDIV_IDX); |
| gain_default = MR97310A_CS_GAIN_DEFAULT; |
| } else if (sd->do_lcd_stop) |
| /* Argus QuickClix has different brightness limits */ |
| gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX) | |
| (1 << CONTRAST_IDX) | |
| (1 << SAKAR_CS_GAIN_IDX); |
| else |
| gspca_dev->ctrl_dis = (1 << ARGUS_QC_BRIGHTNESS_IDX) | |
| (1 << CONTRAST_IDX) | |
| (1 << SAKAR_CS_GAIN_IDX); |
| } |
| |
| sd->brightness = MR97310A_BRIGHTNESS_DEFAULT; |
| sd->exposure = MR97310A_EXPOSURE_DEFAULT; |
| sd->gain = gain_default; |
| sd->contrast = MR97310A_CONTRAST_DEFAULT; |
| sd->min_clockdiv = MR97310A_MIN_CLOCKDIV_DEFAULT; |
| |
| return 0; |
| } |
| |
| /* this function is called at probe and resume time */ |
| static int sd_init(struct gspca_dev *gspca_dev) |
| { |
| return 0; |
| } |
| |
| static int start_cif_cam(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| __u8 *data = gspca_dev->usb_buf; |
| int err_code; |
| static const __u8 startup_string[] = { |
| 0x00, |
| 0x0d, |
| 0x01, |
| 0x00, /* Hsize/8 for 352 or 320 */ |
| 0x00, /* Vsize/4 for 288 or 240 */ |
| 0x13, /* or 0xbb, depends on sensor */ |
| 0x00, /* Hstart, depends on res. */ |
| 0x00, /* reserved ? */ |
| 0x00, /* Vstart, depends on res. and sensor */ |
| 0x50, /* 0x54 to get 176 or 160 */ |
| 0xc0 |
| }; |
| |
| /* Note: Some of the above descriptions guessed from MR97113A driver */ |
| |
| memcpy(data, startup_string, 11); |
| if (sd->sensor_type) |
| data[5] = 0xbb; |
| |
| switch (gspca_dev->width) { |
| case 160: |
| data[9] |= 0x04; /* reg 8, 2:1 scale down from 320 */ |
| /* fall thru */ |
| case 320: |
| default: |
| data[3] = 0x28; /* reg 2, H size/8 */ |
| data[4] = 0x3c; /* reg 3, V size/4 */ |
| data[6] = 0x14; /* reg 5, H start */ |
| data[8] = 0x1a + sd->sensor_type; /* reg 7, V start */ |
| break; |
| case 176: |
| data[9] |= 0x04; /* reg 8, 2:1 scale down from 352 */ |
| /* fall thru */ |
| case 352: |
| data[3] = 0x2c; /* reg 2, H size/8 */ |
| data[4] = 0x48; /* reg 3, V size/4 */ |
| data[6] = 0x06; /* reg 5, H start */ |
| data[8] = 0x06 - sd->sensor_type; /* reg 7, V start */ |
| break; |
| } |
| err_code = mr_write(gspca_dev, 11); |
| if (err_code < 0) |
| return err_code; |
| |
| if (!sd->sensor_type) { |
| static const struct sensor_w_data cif_sensor0_init_data[] = { |
| {0x02, 0x00, {0x03, 0x5a, 0xb5, 0x01, |
| 0x0f, 0x14, 0x0f, 0x10}, 8}, |
| {0x0c, 0x00, {0x04, 0x01, 0x01, 0x00, 0x1f}, 5}, |
| {0x12, 0x00, {0x07}, 1}, |
| {0x1f, 0x00, {0x06}, 1}, |
| {0x27, 0x00, {0x04}, 1}, |
| {0x29, 0x00, {0x0c}, 1}, |
| {0x40, 0x00, {0x40, 0x00, 0x04}, 3}, |
| {0x50, 0x00, {0x60}, 1}, |
| {0x60, 0x00, {0x06}, 1}, |
| {0x6b, 0x00, {0x85, 0x85, 0xc8, 0xc8, 0xc8, 0xc8}, 6}, |
| {0x72, 0x00, {0x1e, 0x56}, 2}, |
| {0x75, 0x00, {0x58, 0x40, 0xa2, 0x02, 0x31, 0x02, |
| 0x31, 0x80, 0x00}, 9}, |
| {0x11, 0x00, {0x01}, 1}, |
| {0, 0, {0}, 0} |
| }; |
| err_code = sensor_write_regs(gspca_dev, cif_sensor0_init_data, |
| ARRAY_SIZE(cif_sensor0_init_data)); |
| } else { /* sd->sensor_type = 1 */ |
| static const struct sensor_w_data cif_sensor1_init_data[] = { |
| /* Reg 3,4, 7,8 get set by the controls */ |
| {0x02, 0x00, {0x10}, 1}, |
| {0x05, 0x01, {0x22}, 1}, /* 5/6 also seen as 65h/32h */ |
| {0x06, 0x01, {0x00}, 1}, |
| {0x09, 0x02, {0x0e}, 1}, |
| {0x0a, 0x02, {0x05}, 1}, |
| {0x0b, 0x02, {0x05}, 1}, |
| {0x0c, 0x02, {0x0f}, 1}, |
| {0x0d, 0x02, {0x07}, 1}, |
| {0x0e, 0x02, {0x0c}, 1}, |
| {0x0f, 0x00, {0x00}, 1}, |
| {0x10, 0x00, {0x06}, 1}, |
| {0x11, 0x00, {0x07}, 1}, |
| {0x12, 0x00, {0x00}, 1}, |
| {0x13, 0x00, {0x01}, 1}, |
| {0, 0, {0}, 0} |
| }; |
| /* Without this command the cam won't work with USB-UHCI */ |
| gspca_dev->usb_buf[0] = 0x0a; |
| gspca_dev->usb_buf[1] = 0x00; |
| err_code = mr_write(gspca_dev, 2); |
| if (err_code < 0) |
| return err_code; |
| err_code = sensor_write_regs(gspca_dev, cif_sensor1_init_data, |
| ARRAY_SIZE(cif_sensor1_init_data)); |
| } |
| return err_code; |
| } |
| |
| static int start_vga_cam(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| __u8 *data = gspca_dev->usb_buf; |
| int err_code; |
| static const __u8 startup_string[] = |
| {0x00, 0x0d, 0x01, 0x00, 0x00, 0x2b, 0x00, 0x00, |
| 0x00, 0x50, 0xc0}; |
| /* What some of these mean is explained in start_cif_cam(), above */ |
| |
| memcpy(data, startup_string, 11); |
| if (!sd->sensor_type) { |
| data[5] = 0x00; |
| data[10] = 0x91; |
| } |
| if (sd->sensor_type == 2) { |
| data[5] = 0x00; |
| data[10] = 0x18; |
| } |
| |
| switch (gspca_dev->width) { |
| case 160: |
| data[9] |= 0x0c; /* reg 8, 4:1 scale down */ |
| /* fall thru */ |
| case 320: |
| data[9] |= 0x04; /* reg 8, 2:1 scale down */ |
| /* fall thru */ |
| case 640: |
| default: |
| data[3] = 0x50; /* reg 2, H size/8 */ |
| data[4] = 0x78; /* reg 3, V size/4 */ |
| data[6] = 0x04; /* reg 5, H start */ |
| data[8] = 0x03; /* reg 7, V start */ |
| if (sd->sensor_type == 2) { |
| data[6] = 2; |
| data[8] = 1; |
| } |
| if (sd->do_lcd_stop) |
| data[8] = 0x04; /* Bayer tile shifted */ |
| break; |
| |
| case 176: |
| data[9] |= 0x04; /* reg 8, 2:1 scale down */ |
| /* fall thru */ |
| case 352: |
| data[3] = 0x2c; /* reg 2, H size */ |
| data[4] = 0x48; /* reg 3, V size */ |
| data[6] = 0x94; /* reg 5, H start */ |
| data[8] = 0x63; /* reg 7, V start */ |
| if (sd->do_lcd_stop) |
| data[8] = 0x64; /* Bayer tile shifted */ |
| break; |
| } |
| |
| err_code = mr_write(gspca_dev, 11); |
| if (err_code < 0) |
| return err_code; |
| |
| if (!sd->sensor_type) { |
| static const struct sensor_w_data vga_sensor0_init_data[] = { |
| {0x01, 0x00, {0x0c, 0x00, 0x04}, 3}, |
| {0x14, 0x00, {0x01, 0xe4, 0x02, 0x84}, 4}, |
| {0x20, 0x00, {0x00, 0x80, 0x00, 0x08}, 4}, |
| {0x25, 0x00, {0x03, 0xa9, 0x80}, 3}, |
| {0x30, 0x00, {0x30, 0x18, 0x10, 0x18}, 4}, |
| {0, 0, {0}, 0} |
| }; |
| err_code = sensor_write_regs(gspca_dev, vga_sensor0_init_data, |
| ARRAY_SIZE(vga_sensor0_init_data)); |
| } else if (sd->sensor_type == 1) { |
| static const struct sensor_w_data color_adj[] = { |
| {0x02, 0x00, {0x06, 0x59, 0x0c, 0x16, 0x00, |
| /* adjusted blue, green, red gain correct |
| too much blue from the Sakar Digital */ |
| 0x05, 0x01, 0x04}, 8} |
| }; |
| |
| static const struct sensor_w_data color_no_adj[] = { |
| {0x02, 0x00, {0x06, 0x59, 0x0c, 0x16, 0x00, |
| /* default blue, green, red gain settings */ |
| 0x07, 0x00, 0x01}, 8} |
| }; |
| |
| static const struct sensor_w_data vga_sensor1_init_data[] = { |
| {0x11, 0x04, {0x01}, 1}, |
| {0x0a, 0x00, {0x00, 0x01, 0x00, 0x00, 0x01, |
| /* These settings may be better for some cameras */ |
| /* {0x0a, 0x00, {0x01, 0x06, 0x00, 0x00, 0x01, */ |
| 0x00, 0x0a}, 7}, |
| {0x11, 0x04, {0x01}, 1}, |
| {0x12, 0x00, {0x00, 0x63, 0x00, 0x70, 0x00, 0x00}, 6}, |
| {0x11, 0x04, {0x01}, 1}, |
| {0, 0, {0}, 0} |
| }; |
| |
| if (sd->adj_colors) |
| err_code = sensor_write_regs(gspca_dev, color_adj, |
| ARRAY_SIZE(color_adj)); |
| else |
| err_code = sensor_write_regs(gspca_dev, color_no_adj, |
| ARRAY_SIZE(color_no_adj)); |
| |
| if (err_code < 0) |
| return err_code; |
| |
| err_code = sensor_write_regs(gspca_dev, vga_sensor1_init_data, |
| ARRAY_SIZE(vga_sensor1_init_data)); |
| } else { /* sensor type == 2 */ |
| static const struct sensor_w_data vga_sensor2_init_data[] = { |
| |
| {0x01, 0x00, {0x48}, 1}, |
| {0x02, 0x00, {0x22}, 1}, |
| /* Reg 3 msb and 4 is lsb of the exposure setting*/ |
| {0x05, 0x00, {0x10}, 1}, |
| {0x06, 0x00, {0x00}, 1}, |
| {0x07, 0x00, {0x00}, 1}, |
| {0x08, 0x00, {0x00}, 1}, |
| {0x09, 0x00, {0x00}, 1}, |
| /* The following are used in the gain control |
| * which is BTW completely borked in the OEM driver |
| * The values for each color go from 0 to 0x7ff |
| *{0x0a, 0x00, {0x01}, 1}, green1 gain msb |
| *{0x0b, 0x00, {0x10}, 1}, green1 gain lsb |
| *{0x0c, 0x00, {0x01}, 1}, red gain msb |
| *{0x0d, 0x00, {0x10}, 1}, red gain lsb |
| *{0x0e, 0x00, {0x01}, 1}, blue gain msb |
| *{0x0f, 0x00, {0x10}, 1}, blue gain lsb |
| *{0x10, 0x00, {0x01}, 1}, green2 gain msb |
| *{0x11, 0x00, {0x10}, 1}, green2 gain lsb |
| */ |
| {0x12, 0x00, {0x00}, 1}, |
| {0x13, 0x00, {0x04}, 1}, /* weird effect on colors */ |
| {0x14, 0x00, {0x00}, 1}, |
| {0x15, 0x00, {0x06}, 1}, |
| {0x16, 0x00, {0x01}, 1}, |
| {0x17, 0x00, {0xe2}, 1}, /* vertical alignment */ |
| {0x18, 0x00, {0x02}, 1}, |
| {0x19, 0x00, {0x82}, 1}, /* don't mess with */ |
| {0x1a, 0x00, {0x00}, 1}, |
| {0x1b, 0x00, {0x20}, 1}, |
| /* {0x1c, 0x00, {0x17}, 1}, contrast control */ |
| {0x1d, 0x00, {0x80}, 1}, /* moving causes a mess */ |
| {0x1e, 0x00, {0x08}, 1}, /* moving jams the camera */ |
| {0x1f, 0x00, {0x0c}, 1}, |
| {0x20, 0x00, {0x00}, 1}, |
| {0, 0, {0}, 0} |
| }; |
| err_code = sensor_write_regs(gspca_dev, vga_sensor2_init_data, |
| ARRAY_SIZE(vga_sensor2_init_data)); |
| } |
| return err_code; |
| } |
| |
| static int sd_start(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| int err_code; |
| |
| sd->sof_read = 0; |
| |
| /* Some of the VGA cameras require the memory pointer |
| * to be set to 0 again. We have been forced to start the |
| * stream in sd_config() to detect the hardware, and closed it. |
| * Thus, we need here to do a completely fresh and clean start. */ |
| err_code = zero_the_pointer(gspca_dev); |
| if (err_code < 0) |
| return err_code; |
| |
| err_code = stream_start(gspca_dev); |
| if (err_code < 0) |
| return err_code; |
| |
| if (sd->cam_type == CAM_TYPE_CIF) { |
| err_code = start_cif_cam(gspca_dev); |
| } else { |
| err_code = start_vga_cam(gspca_dev); |
| } |
| if (err_code < 0) |
| return err_code; |
| |
| setbrightness(gspca_dev); |
| setcontrast(gspca_dev); |
| setexposure(gspca_dev); |
| setgain(gspca_dev); |
| |
| return isoc_enable(gspca_dev); |
| } |
| |
| static void sd_stopN(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| stream_stop(gspca_dev); |
| /* Not all the cams need this, but even if not, probably a good idea */ |
| zero_the_pointer(gspca_dev); |
| if (sd->do_lcd_stop) |
| lcd_stop(gspca_dev); |
| } |
| |
| static void setbrightness(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| u8 val; |
| u8 sign_reg = 7; /* This reg and the next one used on CIF cams. */ |
| u8 value_reg = 8; /* VGA cams seem to use regs 0x0b and 0x0c */ |
| static const u8 quick_clix_table[] = |
| /* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 */ |
| { 0, 4, 8, 12, 1, 2, 3, 5, 6, 9, 7, 10, 13, 11, 14, 15}; |
| /* |
| * This control is disabled for CIF type 1 and VGA type 0 cameras. |
| * It does not quite act linearly for the Argus QuickClix camera, |
| * but it does control brightness. The values are 0 - 15 only, and |
| * the table above makes them act consecutively. |
| */ |
| if ((gspca_dev->ctrl_dis & (1 << NORM_BRIGHTNESS_IDX)) && |
| (gspca_dev->ctrl_dis & (1 << ARGUS_QC_BRIGHTNESS_IDX))) |
| return; |
| |
| if (sd->cam_type == CAM_TYPE_VGA) { |
| sign_reg += 4; |
| value_reg += 4; |
| } |
| |
| /* Note register 7 is also seen as 0x8x or 0xCx in some dumps */ |
| if (sd->brightness > 0) { |
| sensor_write1(gspca_dev, sign_reg, 0x00); |
| val = sd->brightness; |
| } else { |
| sensor_write1(gspca_dev, sign_reg, 0x01); |
| val = (257 - sd->brightness); |
| } |
| /* Use lookup table for funky Argus QuickClix brightness */ |
| if (sd->do_lcd_stop) |
| val = quick_clix_table[val]; |
| |
| sensor_write1(gspca_dev, value_reg, val); |
| } |
| |
| static void setexposure(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| int exposure = MR97310A_EXPOSURE_DEFAULT; |
| u8 buf[2]; |
| |
| if (gspca_dev->ctrl_dis & (1 << EXPOSURE_IDX)) |
| return; |
| |
| if (sd->cam_type == CAM_TYPE_CIF && sd->sensor_type == 1) { |
| /* This cam does not like exposure settings < 300, |
| so scale 0 - 4095 to 300 - 4095 */ |
| exposure = (sd->exposure * 9267) / 10000 + 300; |
| sensor_write1(gspca_dev, 3, exposure >> 4); |
| sensor_write1(gspca_dev, 4, exposure & 0x0f); |
| } else if (sd->sensor_type == 2) { |
| exposure = sd->exposure; |
| exposure >>= 3; |
| sensor_write1(gspca_dev, 3, exposure >> 8); |
| sensor_write1(gspca_dev, 4, exposure & 0xff); |
| } else { |
| /* We have both a clock divider and an exposure register. |
| We first calculate the clock divider, as that determines |
| the maximum exposure and then we calculate the exposure |
| register setting (which goes from 0 - 511). |
| |
| Note our 0 - 4095 exposure is mapped to 0 - 511 |
| milliseconds exposure time */ |
| u8 clockdiv = (60 * sd->exposure + 7999) / 8000; |
| |
| /* Limit framerate to not exceed usb bandwidth */ |
| if (clockdiv < sd->min_clockdiv && gspca_dev->width >= 320) |
| clockdiv = sd->min_clockdiv; |
| else if (clockdiv < 2) |
| clockdiv = 2; |
| |
| if (sd->cam_type == CAM_TYPE_VGA && clockdiv < 4) |
| clockdiv = 4; |
| |
| /* Frame exposure time in ms = 1000 * clockdiv / 60 -> |
| exposure = (sd->exposure / 8) * 511 / (1000 * clockdiv / 60) */ |
| exposure = (60 * 511 * sd->exposure) / (8000 * clockdiv); |
| if (exposure > 511) |
| exposure = 511; |
| |
| /* exposure register value is reversed! */ |
| exposure = 511 - exposure; |
| |
| buf[0] = exposure & 0xff; |
| buf[1] = exposure >> 8; |
| sensor_write_reg(gspca_dev, 0x0e, 0, buf, 2); |
| sensor_write1(gspca_dev, 0x02, clockdiv); |
| } |
| } |
| |
| static void setgain(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| u8 gainreg; |
| |
| if ((gspca_dev->ctrl_dis & (1 << GAIN_IDX)) && |
| (gspca_dev->ctrl_dis & (1 << SAKAR_CS_GAIN_IDX))) |
| return; |
| |
| if (sd->cam_type == CAM_TYPE_CIF && sd->sensor_type == 1) |
| sensor_write1(gspca_dev, 0x0e, sd->gain); |
| else if (sd->cam_type == CAM_TYPE_VGA && sd->sensor_type == 2) |
| for (gainreg = 0x0a; gainreg < 0x11; gainreg += 2) { |
| sensor_write1(gspca_dev, gainreg, sd->gain >> 8); |
| sensor_write1(gspca_dev, gainreg + 1, sd->gain & 0xff); |
| } |
| else |
| sensor_write1(gspca_dev, 0x10, sd->gain); |
| } |
| |
| static void setcontrast(struct gspca_dev *gspca_dev) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| if (gspca_dev->ctrl_dis & (1 << CONTRAST_IDX)) |
| return; |
| |
| sensor_write1(gspca_dev, 0x1c, sd->contrast); |
| } |
| |
| |
| static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->brightness = val; |
| if (gspca_dev->streaming) |
| setbrightness(gspca_dev); |
| return 0; |
| } |
| |
| static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->brightness; |
| return 0; |
| } |
| |
| static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->exposure = val; |
| if (gspca_dev->streaming) |
| setexposure(gspca_dev); |
| return 0; |
| } |
| |
| static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->exposure; |
| return 0; |
| } |
| |
| static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->gain = val; |
| if (gspca_dev->streaming) |
| setgain(gspca_dev); |
| return 0; |
| } |
| |
| static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->gain; |
| return 0; |
| } |
| |
| static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->contrast = val; |
| if (gspca_dev->streaming) |
| setcontrast(gspca_dev); |
| return 0; |
| } |
| |
| |
| static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->contrast; |
| return 0; |
| } |
| |
| static int sd_setmin_clockdiv(struct gspca_dev *gspca_dev, __s32 val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| sd->min_clockdiv = val; |
| if (gspca_dev->streaming) |
| setexposure(gspca_dev); |
| return 0; |
| } |
| |
| static int sd_getmin_clockdiv(struct gspca_dev *gspca_dev, __s32 *val) |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| |
| *val = sd->min_clockdiv; |
| return 0; |
| } |
| |
| /* Include pac common sof detection functions */ |
| #include "pac_common.h" |
| |
| static void sd_pkt_scan(struct gspca_dev *gspca_dev, |
| u8 *data, /* isoc packet */ |
| int len) /* iso packet length */ |
| { |
| struct sd *sd = (struct sd *) gspca_dev; |
| unsigned char *sof; |
| |
| sof = pac_find_sof(&sd->sof_read, data, len); |
| if (sof) { |
| int n; |
| |
| /* finish decoding current frame */ |
| n = sof - data; |
| if (n > sizeof pac_sof_marker) |
| n -= sizeof pac_sof_marker; |
| else |
| n = 0; |
| gspca_frame_add(gspca_dev, LAST_PACKET, |
| data, n); |
| /* Start next frame. */ |
| gspca_frame_add(gspca_dev, FIRST_PACKET, |
| pac_sof_marker, sizeof pac_sof_marker); |
| len -= sof - data; |
| data = sof; |
| } |
| gspca_frame_add(gspca_dev, INTER_PACKET, data, len); |
| } |
| |
| /* sub-driver description */ |
| static const struct sd_desc sd_desc = { |
| .name = MODULE_NAME, |
| .ctrls = sd_ctrls, |
| .nctrls = ARRAY_SIZE(sd_ctrls), |
| .config = sd_config, |
| .init = sd_init, |
| .start = sd_start, |
| .stopN = sd_stopN, |
| .pkt_scan = sd_pkt_scan, |
| }; |
| |
| /* -- module initialisation -- */ |
| static const struct usb_device_id device_table[] = { |
| {USB_DEVICE(0x08ca, 0x0110)}, /* Trust Spyc@m 100 */ |
| {USB_DEVICE(0x08ca, 0x0111)}, /* Aiptek Pencam VGA+ */ |
| {USB_DEVICE(0x093a, 0x010f)}, /* All other known MR97310A VGA cams */ |
| {USB_DEVICE(0x093a, 0x010e)}, /* All known MR97310A CIF cams */ |
| {} |
| }; |
| MODULE_DEVICE_TABLE(usb, device_table); |
| |
| /* -- device connect -- */ |
| static int sd_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), |
| THIS_MODULE); |
| } |
| |
| static struct usb_driver sd_driver = { |
| .name = MODULE_NAME, |
| .id_table = device_table, |
| .probe = sd_probe, |
| .disconnect = gspca_disconnect, |
| #ifdef CONFIG_PM |
| .suspend = gspca_suspend, |
| .resume = gspca_resume, |
| #endif |
| }; |
| |
| module_usb_driver(sd_driver); |