| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * SH RSPI driver |
| * |
| * Copyright (C) 2012, 2013 Renesas Solutions Corp. |
| * Copyright (C) 2014 Glider bvba |
| * |
| * Based on spi-sh.c: |
| * Copyright (C) 2011 Renesas Solutions Corp. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/dmaengine.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/of_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/sh_dma.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/rspi.h> |
| |
| #define RSPI_SPCR 0x00 /* Control Register */ |
| #define RSPI_SSLP 0x01 /* Slave Select Polarity Register */ |
| #define RSPI_SPPCR 0x02 /* Pin Control Register */ |
| #define RSPI_SPSR 0x03 /* Status Register */ |
| #define RSPI_SPDR 0x04 /* Data Register */ |
| #define RSPI_SPSCR 0x08 /* Sequence Control Register */ |
| #define RSPI_SPSSR 0x09 /* Sequence Status Register */ |
| #define RSPI_SPBR 0x0a /* Bit Rate Register */ |
| #define RSPI_SPDCR 0x0b /* Data Control Register */ |
| #define RSPI_SPCKD 0x0c /* Clock Delay Register */ |
| #define RSPI_SSLND 0x0d /* Slave Select Negation Delay Register */ |
| #define RSPI_SPND 0x0e /* Next-Access Delay Register */ |
| #define RSPI_SPCR2 0x0f /* Control Register 2 (SH only) */ |
| #define RSPI_SPCMD0 0x10 /* Command Register 0 */ |
| #define RSPI_SPCMD1 0x12 /* Command Register 1 */ |
| #define RSPI_SPCMD2 0x14 /* Command Register 2 */ |
| #define RSPI_SPCMD3 0x16 /* Command Register 3 */ |
| #define RSPI_SPCMD4 0x18 /* Command Register 4 */ |
| #define RSPI_SPCMD5 0x1a /* Command Register 5 */ |
| #define RSPI_SPCMD6 0x1c /* Command Register 6 */ |
| #define RSPI_SPCMD7 0x1e /* Command Register 7 */ |
| #define RSPI_SPCMD(i) (RSPI_SPCMD0 + (i) * 2) |
| #define RSPI_NUM_SPCMD 8 |
| #define RSPI_RZ_NUM_SPCMD 4 |
| #define QSPI_NUM_SPCMD 4 |
| |
| /* RSPI on RZ only */ |
| #define RSPI_SPBFCR 0x20 /* Buffer Control Register */ |
| #define RSPI_SPBFDR 0x22 /* Buffer Data Count Setting Register */ |
| |
| /* QSPI only */ |
| #define QSPI_SPBFCR 0x18 /* Buffer Control Register */ |
| #define QSPI_SPBDCR 0x1a /* Buffer Data Count Register */ |
| #define QSPI_SPBMUL0 0x1c /* Transfer Data Length Multiplier Setting Register 0 */ |
| #define QSPI_SPBMUL1 0x20 /* Transfer Data Length Multiplier Setting Register 1 */ |
| #define QSPI_SPBMUL2 0x24 /* Transfer Data Length Multiplier Setting Register 2 */ |
| #define QSPI_SPBMUL3 0x28 /* Transfer Data Length Multiplier Setting Register 3 */ |
| #define QSPI_SPBMUL(i) (QSPI_SPBMUL0 + (i) * 4) |
| |
| /* SPCR - Control Register */ |
| #define SPCR_SPRIE 0x80 /* Receive Interrupt Enable */ |
| #define SPCR_SPE 0x40 /* Function Enable */ |
| #define SPCR_SPTIE 0x20 /* Transmit Interrupt Enable */ |
| #define SPCR_SPEIE 0x10 /* Error Interrupt Enable */ |
| #define SPCR_MSTR 0x08 /* Master/Slave Mode Select */ |
| #define SPCR_MODFEN 0x04 /* Mode Fault Error Detection Enable */ |
| /* RSPI on SH only */ |
| #define SPCR_TXMD 0x02 /* TX Only Mode (vs. Full Duplex) */ |
| #define SPCR_SPMS 0x01 /* 3-wire Mode (vs. 4-wire) */ |
| /* QSPI on R-Car Gen2 only */ |
| #define SPCR_WSWAP 0x02 /* Word Swap of read-data for DMAC */ |
| #define SPCR_BSWAP 0x01 /* Byte Swap of read-data for DMAC */ |
| |
| /* SSLP - Slave Select Polarity Register */ |
| #define SSLP_SSL1P 0x02 /* SSL1 Signal Polarity Setting */ |
| #define SSLP_SSL0P 0x01 /* SSL0 Signal Polarity Setting */ |
| |
| /* SPPCR - Pin Control Register */ |
| #define SPPCR_MOIFE 0x20 /* MOSI Idle Value Fixing Enable */ |
| #define SPPCR_MOIFV 0x10 /* MOSI Idle Fixed Value */ |
| #define SPPCR_SPOM 0x04 |
| #define SPPCR_SPLP2 0x02 /* Loopback Mode 2 (non-inverting) */ |
| #define SPPCR_SPLP 0x01 /* Loopback Mode (inverting) */ |
| |
| #define SPPCR_IO3FV 0x04 /* Single-/Dual-SPI Mode IO3 Output Fixed Value */ |
| #define SPPCR_IO2FV 0x04 /* Single-/Dual-SPI Mode IO2 Output Fixed Value */ |
| |
| /* SPSR - Status Register */ |
| #define SPSR_SPRF 0x80 /* Receive Buffer Full Flag */ |
| #define SPSR_TEND 0x40 /* Transmit End */ |
| #define SPSR_SPTEF 0x20 /* Transmit Buffer Empty Flag */ |
| #define SPSR_PERF 0x08 /* Parity Error Flag */ |
| #define SPSR_MODF 0x04 /* Mode Fault Error Flag */ |
| #define SPSR_IDLNF 0x02 /* RSPI Idle Flag */ |
| #define SPSR_OVRF 0x01 /* Overrun Error Flag (RSPI only) */ |
| |
| /* SPSCR - Sequence Control Register */ |
| #define SPSCR_SPSLN_MASK 0x07 /* Sequence Length Specification */ |
| |
| /* SPSSR - Sequence Status Register */ |
| #define SPSSR_SPECM_MASK 0x70 /* Command Error Mask */ |
| #define SPSSR_SPCP_MASK 0x07 /* Command Pointer Mask */ |
| |
| /* SPDCR - Data Control Register */ |
| #define SPDCR_TXDMY 0x80 /* Dummy Data Transmission Enable */ |
| #define SPDCR_SPLW1 0x40 /* Access Width Specification (RZ) */ |
| #define SPDCR_SPLW0 0x20 /* Access Width Specification (RZ) */ |
| #define SPDCR_SPLLWORD (SPDCR_SPLW1 | SPDCR_SPLW0) |
| #define SPDCR_SPLWORD SPDCR_SPLW1 |
| #define SPDCR_SPLBYTE SPDCR_SPLW0 |
| #define SPDCR_SPLW 0x20 /* Access Width Specification (SH) */ |
| #define SPDCR_SPRDTD 0x10 /* Receive Transmit Data Select (SH) */ |
| #define SPDCR_SLSEL1 0x08 |
| #define SPDCR_SLSEL0 0x04 |
| #define SPDCR_SLSEL_MASK 0x0c /* SSL1 Output Select (SH) */ |
| #define SPDCR_SPFC1 0x02 |
| #define SPDCR_SPFC0 0x01 |
| #define SPDCR_SPFC_MASK 0x03 /* Frame Count Setting (1-4) (SH) */ |
| |
| /* SPCKD - Clock Delay Register */ |
| #define SPCKD_SCKDL_MASK 0x07 /* Clock Delay Setting (1-8) */ |
| |
| /* SSLND - Slave Select Negation Delay Register */ |
| #define SSLND_SLNDL_MASK 0x07 /* SSL Negation Delay Setting (1-8) */ |
| |
| /* SPND - Next-Access Delay Register */ |
| #define SPND_SPNDL_MASK 0x07 /* Next-Access Delay Setting (1-8) */ |
| |
| /* SPCR2 - Control Register 2 */ |
| #define SPCR2_PTE 0x08 /* Parity Self-Test Enable */ |
| #define SPCR2_SPIE 0x04 /* Idle Interrupt Enable */ |
| #define SPCR2_SPOE 0x02 /* Odd Parity Enable (vs. Even) */ |
| #define SPCR2_SPPE 0x01 /* Parity Enable */ |
| |
| /* SPCMDn - Command Registers */ |
| #define SPCMD_SCKDEN 0x8000 /* Clock Delay Setting Enable */ |
| #define SPCMD_SLNDEN 0x4000 /* SSL Negation Delay Setting Enable */ |
| #define SPCMD_SPNDEN 0x2000 /* Next-Access Delay Enable */ |
| #define SPCMD_LSBF 0x1000 /* LSB First */ |
| #define SPCMD_SPB_MASK 0x0f00 /* Data Length Setting */ |
| #define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK) |
| #define SPCMD_SPB_8BIT 0x0000 /* QSPI only */ |
| #define SPCMD_SPB_16BIT 0x0100 |
| #define SPCMD_SPB_20BIT 0x0000 |
| #define SPCMD_SPB_24BIT 0x0100 |
| #define SPCMD_SPB_32BIT 0x0200 |
| #define SPCMD_SSLKP 0x0080 /* SSL Signal Level Keeping */ |
| #define SPCMD_SPIMOD_MASK 0x0060 /* SPI Operating Mode (QSPI only) */ |
| #define SPCMD_SPIMOD1 0x0040 |
| #define SPCMD_SPIMOD0 0x0020 |
| #define SPCMD_SPIMOD_SINGLE 0 |
| #define SPCMD_SPIMOD_DUAL SPCMD_SPIMOD0 |
| #define SPCMD_SPIMOD_QUAD SPCMD_SPIMOD1 |
| #define SPCMD_SPRW 0x0010 /* SPI Read/Write Access (Dual/Quad) */ |
| #define SPCMD_SSLA_MASK 0x0030 /* SSL Assert Signal Setting (RSPI) */ |
| #define SPCMD_BRDV_MASK 0x000c /* Bit Rate Division Setting */ |
| #define SPCMD_CPOL 0x0002 /* Clock Polarity Setting */ |
| #define SPCMD_CPHA 0x0001 /* Clock Phase Setting */ |
| |
| /* SPBFCR - Buffer Control Register */ |
| #define SPBFCR_TXRST 0x80 /* Transmit Buffer Data Reset */ |
| #define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset */ |
| #define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */ |
| #define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */ |
| /* QSPI on R-Car Gen2 */ |
| #define SPBFCR_TXTRG_1B 0x00 /* 31 bytes (1 byte available) */ |
| #define SPBFCR_TXTRG_32B 0x30 /* 0 byte (32 bytes available) */ |
| #define SPBFCR_RXTRG_1B 0x00 /* 1 byte (31 bytes available) */ |
| #define SPBFCR_RXTRG_32B 0x07 /* 32 bytes (0 byte available) */ |
| |
| #define QSPI_BUFFER_SIZE 32u |
| |
| struct rspi_data { |
| void __iomem *addr; |
| u32 max_speed_hz; |
| struct spi_controller *ctlr; |
| wait_queue_head_t wait; |
| struct clk *clk; |
| u16 spcmd; |
| u8 spsr; |
| u8 sppcr; |
| int rx_irq, tx_irq; |
| const struct spi_ops *ops; |
| |
| unsigned dma_callbacked:1; |
| unsigned byte_access:1; |
| }; |
| |
| static void rspi_write8(const struct rspi_data *rspi, u8 data, u16 offset) |
| { |
| iowrite8(data, rspi->addr + offset); |
| } |
| |
| static void rspi_write16(const struct rspi_data *rspi, u16 data, u16 offset) |
| { |
| iowrite16(data, rspi->addr + offset); |
| } |
| |
| static void rspi_write32(const struct rspi_data *rspi, u32 data, u16 offset) |
| { |
| iowrite32(data, rspi->addr + offset); |
| } |
| |
| static u8 rspi_read8(const struct rspi_data *rspi, u16 offset) |
| { |
| return ioread8(rspi->addr + offset); |
| } |
| |
| static u16 rspi_read16(const struct rspi_data *rspi, u16 offset) |
| { |
| return ioread16(rspi->addr + offset); |
| } |
| |
| static void rspi_write_data(const struct rspi_data *rspi, u16 data) |
| { |
| if (rspi->byte_access) |
| rspi_write8(rspi, data, RSPI_SPDR); |
| else /* 16 bit */ |
| rspi_write16(rspi, data, RSPI_SPDR); |
| } |
| |
| static u16 rspi_read_data(const struct rspi_data *rspi) |
| { |
| if (rspi->byte_access) |
| return rspi_read8(rspi, RSPI_SPDR); |
| else /* 16 bit */ |
| return rspi_read16(rspi, RSPI_SPDR); |
| } |
| |
| /* optional functions */ |
| struct spi_ops { |
| int (*set_config_register)(struct rspi_data *rspi, int access_size); |
| int (*transfer_one)(struct spi_controller *ctlr, |
| struct spi_device *spi, struct spi_transfer *xfer); |
| u16 mode_bits; |
| u16 flags; |
| u16 fifo_size; |
| }; |
| |
| /* |
| * functions for RSPI on legacy SH |
| */ |
| static int rspi_set_config_register(struct rspi_data *rspi, int access_size) |
| { |
| int spbr; |
| |
| /* Sets output mode, MOSI signal, and (optionally) loopback */ |
| rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR); |
| |
| /* Sets transfer bit rate */ |
| spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), |
| 2 * rspi->max_speed_hz) - 1; |
| rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); |
| |
| /* Disable dummy transmission, set 16-bit word access, 1 frame */ |
| rspi_write8(rspi, 0, RSPI_SPDCR); |
| rspi->byte_access = 0; |
| |
| /* Sets RSPCK, SSL, next-access delay value */ |
| rspi_write8(rspi, 0x00, RSPI_SPCKD); |
| rspi_write8(rspi, 0x00, RSPI_SSLND); |
| rspi_write8(rspi, 0x00, RSPI_SPND); |
| |
| /* Sets parity, interrupt mask */ |
| rspi_write8(rspi, 0x00, RSPI_SPCR2); |
| |
| /* Resets sequencer */ |
| rspi_write8(rspi, 0, RSPI_SPSCR); |
| rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size); |
| rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); |
| |
| /* Sets RSPI mode */ |
| rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR); |
| |
| return 0; |
| } |
| |
| /* |
| * functions for RSPI on RZ |
| */ |
| static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size) |
| { |
| int spbr; |
| int div = 0; |
| unsigned long clksrc; |
| |
| /* Sets output mode, MOSI signal, and (optionally) loopback */ |
| rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR); |
| |
| clksrc = clk_get_rate(rspi->clk); |
| while (div < 3) { |
| if (rspi->max_speed_hz >= clksrc/4) /* 4=(CLK/2)/2 */ |
| break; |
| div++; |
| clksrc /= 2; |
| } |
| |
| /* Sets transfer bit rate */ |
| spbr = DIV_ROUND_UP(clksrc, 2 * rspi->max_speed_hz) - 1; |
| rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); |
| rspi->spcmd |= div << 2; |
| |
| /* Disable dummy transmission, set byte access */ |
| rspi_write8(rspi, SPDCR_SPLBYTE, RSPI_SPDCR); |
| rspi->byte_access = 1; |
| |
| /* Sets RSPCK, SSL, next-access delay value */ |
| rspi_write8(rspi, 0x00, RSPI_SPCKD); |
| rspi_write8(rspi, 0x00, RSPI_SSLND); |
| rspi_write8(rspi, 0x00, RSPI_SPND); |
| |
| /* Resets sequencer */ |
| rspi_write8(rspi, 0, RSPI_SPSCR); |
| rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size); |
| rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); |
| |
| /* Sets RSPI mode */ |
| rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR); |
| |
| return 0; |
| } |
| |
| /* |
| * functions for QSPI |
| */ |
| static int qspi_set_config_register(struct rspi_data *rspi, int access_size) |
| { |
| int spbr; |
| |
| /* Sets output mode, MOSI signal, and (optionally) loopback */ |
| rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR); |
| |
| /* Sets transfer bit rate */ |
| spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->max_speed_hz); |
| rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR); |
| |
| /* Disable dummy transmission, set byte access */ |
| rspi_write8(rspi, 0, RSPI_SPDCR); |
| rspi->byte_access = 1; |
| |
| /* Sets RSPCK, SSL, next-access delay value */ |
| rspi_write8(rspi, 0x00, RSPI_SPCKD); |
| rspi_write8(rspi, 0x00, RSPI_SSLND); |
| rspi_write8(rspi, 0x00, RSPI_SPND); |
| |
| /* Data Length Setting */ |
| if (access_size == 8) |
| rspi->spcmd |= SPCMD_SPB_8BIT; |
| else if (access_size == 16) |
| rspi->spcmd |= SPCMD_SPB_16BIT; |
| else |
| rspi->spcmd |= SPCMD_SPB_32BIT; |
| |
| rspi->spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SPNDEN; |
| |
| /* Resets transfer data length */ |
| rspi_write32(rspi, 0, QSPI_SPBMUL0); |
| |
| /* Resets transmit and receive buffer */ |
| rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR); |
| /* Sets buffer to allow normal operation */ |
| rspi_write8(rspi, 0x00, QSPI_SPBFCR); |
| |
| /* Resets sequencer */ |
| rspi_write8(rspi, 0, RSPI_SPSCR); |
| rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); |
| |
| /* Sets RSPI mode */ |
| rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR); |
| |
| return 0; |
| } |
| |
| static void qspi_update(const struct rspi_data *rspi, u8 mask, u8 val, u8 reg) |
| { |
| u8 data; |
| |
| data = rspi_read8(rspi, reg); |
| data &= ~mask; |
| data |= (val & mask); |
| rspi_write8(rspi, data, reg); |
| } |
| |
| static unsigned int qspi_set_send_trigger(struct rspi_data *rspi, |
| unsigned int len) |
| { |
| unsigned int n; |
| |
| n = min(len, QSPI_BUFFER_SIZE); |
| |
| if (len >= QSPI_BUFFER_SIZE) { |
| /* sets triggering number to 32 bytes */ |
| qspi_update(rspi, SPBFCR_TXTRG_MASK, |
| SPBFCR_TXTRG_32B, QSPI_SPBFCR); |
| } else { |
| /* sets triggering number to 1 byte */ |
| qspi_update(rspi, SPBFCR_TXTRG_MASK, |
| SPBFCR_TXTRG_1B, QSPI_SPBFCR); |
| } |
| |
| return n; |
| } |
| |
| static int qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len) |
| { |
| unsigned int n; |
| |
| n = min(len, QSPI_BUFFER_SIZE); |
| |
| if (len >= QSPI_BUFFER_SIZE) { |
| /* sets triggering number to 32 bytes */ |
| qspi_update(rspi, SPBFCR_RXTRG_MASK, |
| SPBFCR_RXTRG_32B, QSPI_SPBFCR); |
| } else { |
| /* sets triggering number to 1 byte */ |
| qspi_update(rspi, SPBFCR_RXTRG_MASK, |
| SPBFCR_RXTRG_1B, QSPI_SPBFCR); |
| } |
| return n; |
| } |
| |
| #define set_config_register(spi, n) spi->ops->set_config_register(spi, n) |
| |
| static void rspi_enable_irq(const struct rspi_data *rspi, u8 enable) |
| { |
| rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | enable, RSPI_SPCR); |
| } |
| |
| static void rspi_disable_irq(const struct rspi_data *rspi, u8 disable) |
| { |
| rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~disable, RSPI_SPCR); |
| } |
| |
| static int rspi_wait_for_interrupt(struct rspi_data *rspi, u8 wait_mask, |
| u8 enable_bit) |
| { |
| int ret; |
| |
| rspi->spsr = rspi_read8(rspi, RSPI_SPSR); |
| if (rspi->spsr & wait_mask) |
| return 0; |
| |
| rspi_enable_irq(rspi, enable_bit); |
| ret = wait_event_timeout(rspi->wait, rspi->spsr & wait_mask, HZ); |
| if (ret == 0 && !(rspi->spsr & wait_mask)) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static inline int rspi_wait_for_tx_empty(struct rspi_data *rspi) |
| { |
| return rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); |
| } |
| |
| static inline int rspi_wait_for_rx_full(struct rspi_data *rspi) |
| { |
| return rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE); |
| } |
| |
| static int rspi_data_out(struct rspi_data *rspi, u8 data) |
| { |
| int error = rspi_wait_for_tx_empty(rspi); |
| if (error < 0) { |
| dev_err(&rspi->ctlr->dev, "transmit timeout\n"); |
| return error; |
| } |
| rspi_write_data(rspi, data); |
| return 0; |
| } |
| |
| static int rspi_data_in(struct rspi_data *rspi) |
| { |
| int error; |
| u8 data; |
| |
| error = rspi_wait_for_rx_full(rspi); |
| if (error < 0) { |
| dev_err(&rspi->ctlr->dev, "receive timeout\n"); |
| return error; |
| } |
| data = rspi_read_data(rspi); |
| return data; |
| } |
| |
| static int rspi_pio_transfer(struct rspi_data *rspi, const u8 *tx, u8 *rx, |
| unsigned int n) |
| { |
| while (n-- > 0) { |
| if (tx) { |
| int ret = rspi_data_out(rspi, *tx++); |
| if (ret < 0) |
| return ret; |
| } |
| if (rx) { |
| int ret = rspi_data_in(rspi); |
| if (ret < 0) |
| return ret; |
| *rx++ = ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void rspi_dma_complete(void *arg) |
| { |
| struct rspi_data *rspi = arg; |
| |
| rspi->dma_callbacked = 1; |
| wake_up_interruptible(&rspi->wait); |
| } |
| |
| static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx, |
| struct sg_table *rx) |
| { |
| struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL; |
| u8 irq_mask = 0; |
| unsigned int other_irq = 0; |
| dma_cookie_t cookie; |
| int ret; |
| |
| /* First prepare and submit the DMA request(s), as this may fail */ |
| if (rx) { |
| desc_rx = dmaengine_prep_slave_sg(rspi->ctlr->dma_rx, rx->sgl, |
| rx->nents, DMA_DEV_TO_MEM, |
| DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| if (!desc_rx) { |
| ret = -EAGAIN; |
| goto no_dma_rx; |
| } |
| |
| desc_rx->callback = rspi_dma_complete; |
| desc_rx->callback_param = rspi; |
| cookie = dmaengine_submit(desc_rx); |
| if (dma_submit_error(cookie)) { |
| ret = cookie; |
| goto no_dma_rx; |
| } |
| |
| irq_mask |= SPCR_SPRIE; |
| } |
| |
| if (tx) { |
| desc_tx = dmaengine_prep_slave_sg(rspi->ctlr->dma_tx, tx->sgl, |
| tx->nents, DMA_MEM_TO_DEV, |
| DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| if (!desc_tx) { |
| ret = -EAGAIN; |
| goto no_dma_tx; |
| } |
| |
| if (rx) { |
| /* No callback */ |
| desc_tx->callback = NULL; |
| } else { |
| desc_tx->callback = rspi_dma_complete; |
| desc_tx->callback_param = rspi; |
| } |
| cookie = dmaengine_submit(desc_tx); |
| if (dma_submit_error(cookie)) { |
| ret = cookie; |
| goto no_dma_tx; |
| } |
| |
| irq_mask |= SPCR_SPTIE; |
| } |
| |
| /* |
| * DMAC needs SPxIE, but if SPxIE is set, the IRQ routine will be |
| * called. So, this driver disables the IRQ while DMA transfer. |
| */ |
| if (tx) |
| disable_irq(other_irq = rspi->tx_irq); |
| if (rx && rspi->rx_irq != other_irq) |
| disable_irq(rspi->rx_irq); |
| |
| rspi_enable_irq(rspi, irq_mask); |
| rspi->dma_callbacked = 0; |
| |
| /* Now start DMA */ |
| if (rx) |
| dma_async_issue_pending(rspi->ctlr->dma_rx); |
| if (tx) |
| dma_async_issue_pending(rspi->ctlr->dma_tx); |
| |
| ret = wait_event_interruptible_timeout(rspi->wait, |
| rspi->dma_callbacked, HZ); |
| if (ret > 0 && rspi->dma_callbacked) { |
| ret = 0; |
| } else { |
| if (!ret) { |
| dev_err(&rspi->ctlr->dev, "DMA timeout\n"); |
| ret = -ETIMEDOUT; |
| } |
| if (tx) |
| dmaengine_terminate_all(rspi->ctlr->dma_tx); |
| if (rx) |
| dmaengine_terminate_all(rspi->ctlr->dma_rx); |
| } |
| |
| rspi_disable_irq(rspi, irq_mask); |
| |
| if (tx) |
| enable_irq(rspi->tx_irq); |
| if (rx && rspi->rx_irq != other_irq) |
| enable_irq(rspi->rx_irq); |
| |
| return ret; |
| |
| no_dma_tx: |
| if (rx) |
| dmaengine_terminate_all(rspi->ctlr->dma_rx); |
| no_dma_rx: |
| if (ret == -EAGAIN) { |
| pr_warn_once("%s %s: DMA not available, falling back to PIO\n", |
| dev_driver_string(&rspi->ctlr->dev), |
| dev_name(&rspi->ctlr->dev)); |
| } |
| return ret; |
| } |
| |
| static void rspi_receive_init(const struct rspi_data *rspi) |
| { |
| u8 spsr; |
| |
| spsr = rspi_read8(rspi, RSPI_SPSR); |
| if (spsr & SPSR_SPRF) |
| rspi_read_data(rspi); /* dummy read */ |
| if (spsr & SPSR_OVRF) |
| rspi_write8(rspi, rspi_read8(rspi, RSPI_SPSR) & ~SPSR_OVRF, |
| RSPI_SPSR); |
| } |
| |
| static void rspi_rz_receive_init(const struct rspi_data *rspi) |
| { |
| rspi_receive_init(rspi); |
| rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, RSPI_SPBFCR); |
| rspi_write8(rspi, 0, RSPI_SPBFCR); |
| } |
| |
| static void qspi_receive_init(const struct rspi_data *rspi) |
| { |
| u8 spsr; |
| |
| spsr = rspi_read8(rspi, RSPI_SPSR); |
| if (spsr & SPSR_SPRF) |
| rspi_read_data(rspi); /* dummy read */ |
| rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR); |
| rspi_write8(rspi, 0, QSPI_SPBFCR); |
| } |
| |
| static bool __rspi_can_dma(const struct rspi_data *rspi, |
| const struct spi_transfer *xfer) |
| { |
| return xfer->len > rspi->ops->fifo_size; |
| } |
| |
| static bool rspi_can_dma(struct spi_controller *ctlr, struct spi_device *spi, |
| struct spi_transfer *xfer) |
| { |
| struct rspi_data *rspi = spi_controller_get_devdata(ctlr); |
| |
| return __rspi_can_dma(rspi, xfer); |
| } |
| |
| static int rspi_dma_check_then_transfer(struct rspi_data *rspi, |
| struct spi_transfer *xfer) |
| { |
| if (!rspi->ctlr->can_dma || !__rspi_can_dma(rspi, xfer)) |
| return -EAGAIN; |
| |
| /* rx_buf can be NULL on RSPI on SH in TX-only Mode */ |
| return rspi_dma_transfer(rspi, &xfer->tx_sg, |
| xfer->rx_buf ? &xfer->rx_sg : NULL); |
| } |
| |
| static int rspi_common_transfer(struct rspi_data *rspi, |
| struct spi_transfer *xfer) |
| { |
| int ret; |
| |
| ret = rspi_dma_check_then_transfer(rspi, xfer); |
| if (ret != -EAGAIN) |
| return ret; |
| |
| ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len); |
| if (ret < 0) |
| return ret; |
| |
| /* Wait for the last transmission */ |
| rspi_wait_for_tx_empty(rspi); |
| |
| return 0; |
| } |
| |
| static int rspi_transfer_one(struct spi_controller *ctlr, |
| struct spi_device *spi, struct spi_transfer *xfer) |
| { |
| struct rspi_data *rspi = spi_controller_get_devdata(ctlr); |
| u8 spcr; |
| |
| spcr = rspi_read8(rspi, RSPI_SPCR); |
| if (xfer->rx_buf) { |
| rspi_receive_init(rspi); |
| spcr &= ~SPCR_TXMD; |
| } else { |
| spcr |= SPCR_TXMD; |
| } |
| rspi_write8(rspi, spcr, RSPI_SPCR); |
| |
| return rspi_common_transfer(rspi, xfer); |
| } |
| |
| static int rspi_rz_transfer_one(struct spi_controller *ctlr, |
| struct spi_device *spi, |
| struct spi_transfer *xfer) |
| { |
| struct rspi_data *rspi = spi_controller_get_devdata(ctlr); |
| |
| rspi_rz_receive_init(rspi); |
| |
| return rspi_common_transfer(rspi, xfer); |
| } |
| |
| static int qspi_trigger_transfer_out_in(struct rspi_data *rspi, const u8 *tx, |
| u8 *rx, unsigned int len) |
| { |
| unsigned int i, n; |
| int ret; |
| |
| while (len > 0) { |
| n = qspi_set_send_trigger(rspi, len); |
| qspi_set_receive_trigger(rspi, len); |
| ret = rspi_wait_for_tx_empty(rspi); |
| if (ret < 0) { |
| dev_err(&rspi->ctlr->dev, "transmit timeout\n"); |
| return ret; |
| } |
| for (i = 0; i < n; i++) |
| rspi_write_data(rspi, *tx++); |
| |
| ret = rspi_wait_for_rx_full(rspi); |
| if (ret < 0) { |
| dev_err(&rspi->ctlr->dev, "receive timeout\n"); |
| return ret; |
| } |
| for (i = 0; i < n; i++) |
| *rx++ = rspi_read_data(rspi); |
| |
| len -= n; |
| } |
| |
| return 0; |
| } |
| |
| static int qspi_transfer_out_in(struct rspi_data *rspi, |
| struct spi_transfer *xfer) |
| { |
| int ret; |
| |
| qspi_receive_init(rspi); |
| |
| ret = rspi_dma_check_then_transfer(rspi, xfer); |
| if (ret != -EAGAIN) |
| return ret; |
| |
| return qspi_trigger_transfer_out_in(rspi, xfer->tx_buf, |
| xfer->rx_buf, xfer->len); |
| } |
| |
| static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer) |
| { |
| const u8 *tx = xfer->tx_buf; |
| unsigned int n = xfer->len; |
| unsigned int i, len; |
| int ret; |
| |
| if (rspi->ctlr->can_dma && __rspi_can_dma(rspi, xfer)) { |
| ret = rspi_dma_transfer(rspi, &xfer->tx_sg, NULL); |
| if (ret != -EAGAIN) |
| return ret; |
| } |
| |
| while (n > 0) { |
| len = qspi_set_send_trigger(rspi, n); |
| ret = rspi_wait_for_tx_empty(rspi); |
| if (ret < 0) { |
| dev_err(&rspi->ctlr->dev, "transmit timeout\n"); |
| return ret; |
| } |
| for (i = 0; i < len; i++) |
| rspi_write_data(rspi, *tx++); |
| |
| n -= len; |
| } |
| |
| /* Wait for the last transmission */ |
| rspi_wait_for_tx_empty(rspi); |
| |
| return 0; |
| } |
| |
| static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer) |
| { |
| u8 *rx = xfer->rx_buf; |
| unsigned int n = xfer->len; |
| unsigned int i, len; |
| int ret; |
| |
| if (rspi->ctlr->can_dma && __rspi_can_dma(rspi, xfer)) { |
| int ret = rspi_dma_transfer(rspi, NULL, &xfer->rx_sg); |
| if (ret != -EAGAIN) |
| return ret; |
| } |
| |
| while (n > 0) { |
| len = qspi_set_receive_trigger(rspi, n); |
| ret = rspi_wait_for_rx_full(rspi); |
| if (ret < 0) { |
| dev_err(&rspi->ctlr->dev, "receive timeout\n"); |
| return ret; |
| } |
| for (i = 0; i < len; i++) |
| *rx++ = rspi_read_data(rspi); |
| |
| n -= len; |
| } |
| |
| return 0; |
| } |
| |
| static int qspi_transfer_one(struct spi_controller *ctlr, |
| struct spi_device *spi, struct spi_transfer *xfer) |
| { |
| struct rspi_data *rspi = spi_controller_get_devdata(ctlr); |
| |
| if (spi->mode & SPI_LOOP) { |
| return qspi_transfer_out_in(rspi, xfer); |
| } else if (xfer->tx_nbits > SPI_NBITS_SINGLE) { |
| /* Quad or Dual SPI Write */ |
| return qspi_transfer_out(rspi, xfer); |
| } else if (xfer->rx_nbits > SPI_NBITS_SINGLE) { |
| /* Quad or Dual SPI Read */ |
| return qspi_transfer_in(rspi, xfer); |
| } else { |
| /* Single SPI Transfer */ |
| return qspi_transfer_out_in(rspi, xfer); |
| } |
| } |
| |
| static u16 qspi_transfer_mode(const struct spi_transfer *xfer) |
| { |
| if (xfer->tx_buf) |
| switch (xfer->tx_nbits) { |
| case SPI_NBITS_QUAD: |
| return SPCMD_SPIMOD_QUAD; |
| case SPI_NBITS_DUAL: |
| return SPCMD_SPIMOD_DUAL; |
| default: |
| return 0; |
| } |
| if (xfer->rx_buf) |
| switch (xfer->rx_nbits) { |
| case SPI_NBITS_QUAD: |
| return SPCMD_SPIMOD_QUAD | SPCMD_SPRW; |
| case SPI_NBITS_DUAL: |
| return SPCMD_SPIMOD_DUAL | SPCMD_SPRW; |
| default: |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| static int qspi_setup_sequencer(struct rspi_data *rspi, |
| const struct spi_message *msg) |
| { |
| const struct spi_transfer *xfer; |
| unsigned int i = 0, len = 0; |
| u16 current_mode = 0xffff, mode; |
| |
| list_for_each_entry(xfer, &msg->transfers, transfer_list) { |
| mode = qspi_transfer_mode(xfer); |
| if (mode == current_mode) { |
| len += xfer->len; |
| continue; |
| } |
| |
| /* Transfer mode change */ |
| if (i) { |
| /* Set transfer data length of previous transfer */ |
| rspi_write32(rspi, len, QSPI_SPBMUL(i - 1)); |
| } |
| |
| if (i >= QSPI_NUM_SPCMD) { |
| dev_err(&msg->spi->dev, |
| "Too many different transfer modes"); |
| return -EINVAL; |
| } |
| |
| /* Program transfer mode for this transfer */ |
| rspi_write16(rspi, rspi->spcmd | mode, RSPI_SPCMD(i)); |
| current_mode = mode; |
| len = xfer->len; |
| i++; |
| } |
| if (i) { |
| /* Set final transfer data length and sequence length */ |
| rspi_write32(rspi, len, QSPI_SPBMUL(i - 1)); |
| rspi_write8(rspi, i - 1, RSPI_SPSCR); |
| } |
| |
| return 0; |
| } |
| |
| static int rspi_prepare_message(struct spi_controller *ctlr, |
| struct spi_message *msg) |
| { |
| struct rspi_data *rspi = spi_controller_get_devdata(ctlr); |
| struct spi_device *spi = msg->spi; |
| int ret; |
| |
| rspi->max_speed_hz = spi->max_speed_hz; |
| |
| rspi->spcmd = SPCMD_SSLKP; |
| if (spi->mode & SPI_CPOL) |
| rspi->spcmd |= SPCMD_CPOL; |
| if (spi->mode & SPI_CPHA) |
| rspi->spcmd |= SPCMD_CPHA; |
| |
| /* CMOS output mode and MOSI signal from previous transfer */ |
| rspi->sppcr = 0; |
| if (spi->mode & SPI_LOOP) |
| rspi->sppcr |= SPPCR_SPLP; |
| |
| set_config_register(rspi, 8); |
| |
| if (msg->spi->mode & |
| (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)) { |
| /* Setup sequencer for messages with multiple transfer modes */ |
| ret = qspi_setup_sequencer(rspi, msg); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* Enable SPI function in master mode */ |
| rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_SPE, RSPI_SPCR); |
| return 0; |
| } |
| |
| static int rspi_unprepare_message(struct spi_controller *ctlr, |
| struct spi_message *msg) |
| { |
| struct rspi_data *rspi = spi_controller_get_devdata(ctlr); |
| |
| /* Disable SPI function */ |
| rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR); |
| |
| /* Reset sequencer for Single SPI Transfers */ |
| rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0); |
| rspi_write8(rspi, 0, RSPI_SPSCR); |
| return 0; |
| } |
| |
| static irqreturn_t rspi_irq_mux(int irq, void *_sr) |
| { |
| struct rspi_data *rspi = _sr; |
| u8 spsr; |
| irqreturn_t ret = IRQ_NONE; |
| u8 disable_irq = 0; |
| |
| rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR); |
| if (spsr & SPSR_SPRF) |
| disable_irq |= SPCR_SPRIE; |
| if (spsr & SPSR_SPTEF) |
| disable_irq |= SPCR_SPTIE; |
| |
| if (disable_irq) { |
| ret = IRQ_HANDLED; |
| rspi_disable_irq(rspi, disable_irq); |
| wake_up(&rspi->wait); |
| } |
| |
| return ret; |
| } |
| |
| static irqreturn_t rspi_irq_rx(int irq, void *_sr) |
| { |
| struct rspi_data *rspi = _sr; |
| u8 spsr; |
| |
| rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR); |
| if (spsr & SPSR_SPRF) { |
| rspi_disable_irq(rspi, SPCR_SPRIE); |
| wake_up(&rspi->wait); |
| return IRQ_HANDLED; |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t rspi_irq_tx(int irq, void *_sr) |
| { |
| struct rspi_data *rspi = _sr; |
| u8 spsr; |
| |
| rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR); |
| if (spsr & SPSR_SPTEF) { |
| rspi_disable_irq(rspi, SPCR_SPTIE); |
| wake_up(&rspi->wait); |
| return IRQ_HANDLED; |
| } |
| |
| return 0; |
| } |
| |
| static struct dma_chan *rspi_request_dma_chan(struct device *dev, |
| enum dma_transfer_direction dir, |
| unsigned int id, |
| dma_addr_t port_addr) |
| { |
| dma_cap_mask_t mask; |
| struct dma_chan *chan; |
| struct dma_slave_config cfg; |
| int ret; |
| |
| dma_cap_zero(mask); |
| dma_cap_set(DMA_SLAVE, mask); |
| |
| chan = dma_request_slave_channel_compat(mask, shdma_chan_filter, |
| (void *)(unsigned long)id, dev, |
| dir == DMA_MEM_TO_DEV ? "tx" : "rx"); |
| if (!chan) { |
| dev_warn(dev, "dma_request_slave_channel_compat failed\n"); |
| return NULL; |
| } |
| |
| memset(&cfg, 0, sizeof(cfg)); |
| cfg.direction = dir; |
| if (dir == DMA_MEM_TO_DEV) { |
| cfg.dst_addr = port_addr; |
| cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; |
| } else { |
| cfg.src_addr = port_addr; |
| cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; |
| } |
| |
| ret = dmaengine_slave_config(chan, &cfg); |
| if (ret) { |
| dev_warn(dev, "dmaengine_slave_config failed %d\n", ret); |
| dma_release_channel(chan); |
| return NULL; |
| } |
| |
| return chan; |
| } |
| |
| static int rspi_request_dma(struct device *dev, struct spi_controller *ctlr, |
| const struct resource *res) |
| { |
| const struct rspi_plat_data *rspi_pd = dev_get_platdata(dev); |
| unsigned int dma_tx_id, dma_rx_id; |
| |
| if (dev->of_node) { |
| /* In the OF case we will get the slave IDs from the DT */ |
| dma_tx_id = 0; |
| dma_rx_id = 0; |
| } else if (rspi_pd && rspi_pd->dma_tx_id && rspi_pd->dma_rx_id) { |
| dma_tx_id = rspi_pd->dma_tx_id; |
| dma_rx_id = rspi_pd->dma_rx_id; |
| } else { |
| /* The driver assumes no error. */ |
| return 0; |
| } |
| |
| ctlr->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, dma_tx_id, |
| res->start + RSPI_SPDR); |
| if (!ctlr->dma_tx) |
| return -ENODEV; |
| |
| ctlr->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, dma_rx_id, |
| res->start + RSPI_SPDR); |
| if (!ctlr->dma_rx) { |
| dma_release_channel(ctlr->dma_tx); |
| ctlr->dma_tx = NULL; |
| return -ENODEV; |
| } |
| |
| ctlr->can_dma = rspi_can_dma; |
| dev_info(dev, "DMA available"); |
| return 0; |
| } |
| |
| static void rspi_release_dma(struct spi_controller *ctlr) |
| { |
| if (ctlr->dma_tx) |
| dma_release_channel(ctlr->dma_tx); |
| if (ctlr->dma_rx) |
| dma_release_channel(ctlr->dma_rx); |
| } |
| |
| static int rspi_remove(struct platform_device *pdev) |
| { |
| struct rspi_data *rspi = platform_get_drvdata(pdev); |
| |
| rspi_release_dma(rspi->ctlr); |
| pm_runtime_disable(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static const struct spi_ops rspi_ops = { |
| .set_config_register = rspi_set_config_register, |
| .transfer_one = rspi_transfer_one, |
| .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP, |
| .flags = SPI_CONTROLLER_MUST_TX, |
| .fifo_size = 8, |
| }; |
| |
| static const struct spi_ops rspi_rz_ops = { |
| .set_config_register = rspi_rz_set_config_register, |
| .transfer_one = rspi_rz_transfer_one, |
| .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP, |
| .flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX, |
| .fifo_size = 8, /* 8 for TX, 32 for RX */ |
| }; |
| |
| static const struct spi_ops qspi_ops = { |
| .set_config_register = qspi_set_config_register, |
| .transfer_one = qspi_transfer_one, |
| .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP | |
| SPI_TX_DUAL | SPI_TX_QUAD | |
| SPI_RX_DUAL | SPI_RX_QUAD, |
| .flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX, |
| .fifo_size = 32, |
| }; |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id rspi_of_match[] = { |
| /* RSPI on legacy SH */ |
| { .compatible = "renesas,rspi", .data = &rspi_ops }, |
| /* RSPI on RZ/A1H */ |
| { .compatible = "renesas,rspi-rz", .data = &rspi_rz_ops }, |
| /* QSPI on R-Car Gen2 */ |
| { .compatible = "renesas,qspi", .data = &qspi_ops }, |
| { /* sentinel */ } |
| }; |
| |
| MODULE_DEVICE_TABLE(of, rspi_of_match); |
| |
| static int rspi_parse_dt(struct device *dev, struct spi_controller *ctlr) |
| { |
| u32 num_cs; |
| int error; |
| |
| /* Parse DT properties */ |
| error = of_property_read_u32(dev->of_node, "num-cs", &num_cs); |
| if (error) { |
| dev_err(dev, "of_property_read_u32 num-cs failed %d\n", error); |
| return error; |
| } |
| |
| ctlr->num_chipselect = num_cs; |
| return 0; |
| } |
| #else |
| #define rspi_of_match NULL |
| static inline int rspi_parse_dt(struct device *dev, struct spi_controller *ctlr) |
| { |
| return -EINVAL; |
| } |
| #endif /* CONFIG_OF */ |
| |
| static int rspi_request_irq(struct device *dev, unsigned int irq, |
| irq_handler_t handler, const char *suffix, |
| void *dev_id) |
| { |
| const char *name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s", |
| dev_name(dev), suffix); |
| if (!name) |
| return -ENOMEM; |
| |
| return devm_request_irq(dev, irq, handler, 0, name, dev_id); |
| } |
| |
| static int rspi_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| struct spi_controller *ctlr; |
| struct rspi_data *rspi; |
| int ret; |
| const struct rspi_plat_data *rspi_pd; |
| const struct spi_ops *ops; |
| |
| ctlr = spi_alloc_master(&pdev->dev, sizeof(struct rspi_data)); |
| if (ctlr == NULL) |
| return -ENOMEM; |
| |
| ops = of_device_get_match_data(&pdev->dev); |
| if (ops) { |
| ret = rspi_parse_dt(&pdev->dev, ctlr); |
| if (ret) |
| goto error1; |
| } else { |
| ops = (struct spi_ops *)pdev->id_entry->driver_data; |
| rspi_pd = dev_get_platdata(&pdev->dev); |
| if (rspi_pd && rspi_pd->num_chipselect) |
| ctlr->num_chipselect = rspi_pd->num_chipselect; |
| else |
| ctlr->num_chipselect = 2; /* default */ |
| } |
| |
| /* ops parameter check */ |
| if (!ops->set_config_register) { |
| dev_err(&pdev->dev, "there is no set_config_register\n"); |
| ret = -ENODEV; |
| goto error1; |
| } |
| |
| rspi = spi_controller_get_devdata(ctlr); |
| platform_set_drvdata(pdev, rspi); |
| rspi->ops = ops; |
| rspi->ctlr = ctlr; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| rspi->addr = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(rspi->addr)) { |
| ret = PTR_ERR(rspi->addr); |
| goto error1; |
| } |
| |
| rspi->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(rspi->clk)) { |
| dev_err(&pdev->dev, "cannot get clock\n"); |
| ret = PTR_ERR(rspi->clk); |
| goto error1; |
| } |
| |
| pm_runtime_enable(&pdev->dev); |
| |
| init_waitqueue_head(&rspi->wait); |
| |
| ctlr->bus_num = pdev->id; |
| ctlr->auto_runtime_pm = true; |
| ctlr->transfer_one = ops->transfer_one; |
| ctlr->prepare_message = rspi_prepare_message; |
| ctlr->unprepare_message = rspi_unprepare_message; |
| ctlr->mode_bits = ops->mode_bits; |
| ctlr->flags = ops->flags; |
| ctlr->dev.of_node = pdev->dev.of_node; |
| |
| ret = platform_get_irq_byname_optional(pdev, "rx"); |
| if (ret < 0) { |
| ret = platform_get_irq_byname_optional(pdev, "mux"); |
| if (ret < 0) |
| ret = platform_get_irq(pdev, 0); |
| if (ret >= 0) |
| rspi->rx_irq = rspi->tx_irq = ret; |
| } else { |
| rspi->rx_irq = ret; |
| ret = platform_get_irq_byname(pdev, "tx"); |
| if (ret >= 0) |
| rspi->tx_irq = ret; |
| } |
| |
| if (rspi->rx_irq == rspi->tx_irq) { |
| /* Single multiplexed interrupt */ |
| ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_mux, |
| "mux", rspi); |
| } else { |
| /* Multi-interrupt mode, only SPRI and SPTI are used */ |
| ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_rx, |
| "rx", rspi); |
| if (!ret) |
| ret = rspi_request_irq(&pdev->dev, rspi->tx_irq, |
| rspi_irq_tx, "tx", rspi); |
| } |
| if (ret < 0) { |
| dev_err(&pdev->dev, "request_irq error\n"); |
| goto error2; |
| } |
| |
| ret = rspi_request_dma(&pdev->dev, ctlr, res); |
| if (ret < 0) |
| dev_warn(&pdev->dev, "DMA not available, using PIO\n"); |
| |
| ret = devm_spi_register_controller(&pdev->dev, ctlr); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "devm_spi_register_controller error.\n"); |
| goto error3; |
| } |
| |
| dev_info(&pdev->dev, "probed\n"); |
| |
| return 0; |
| |
| error3: |
| rspi_release_dma(ctlr); |
| error2: |
| pm_runtime_disable(&pdev->dev); |
| error1: |
| spi_controller_put(ctlr); |
| |
| return ret; |
| } |
| |
| static const struct platform_device_id spi_driver_ids[] = { |
| { "rspi", (kernel_ulong_t)&rspi_ops }, |
| { "rspi-rz", (kernel_ulong_t)&rspi_rz_ops }, |
| { "qspi", (kernel_ulong_t)&qspi_ops }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(platform, spi_driver_ids); |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int rspi_suspend(struct device *dev) |
| { |
| struct rspi_data *rspi = dev_get_drvdata(dev); |
| |
| return spi_controller_suspend(rspi->ctlr); |
| } |
| |
| static int rspi_resume(struct device *dev) |
| { |
| struct rspi_data *rspi = dev_get_drvdata(dev); |
| |
| return spi_controller_resume(rspi->ctlr); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(rspi_pm_ops, rspi_suspend, rspi_resume); |
| #define DEV_PM_OPS &rspi_pm_ops |
| #else |
| #define DEV_PM_OPS NULL |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static struct platform_driver rspi_driver = { |
| .probe = rspi_probe, |
| .remove = rspi_remove, |
| .id_table = spi_driver_ids, |
| .driver = { |
| .name = "renesas_spi", |
| .pm = DEV_PM_OPS, |
| .of_match_table = of_match_ptr(rspi_of_match), |
| }, |
| }; |
| module_platform_driver(rspi_driver); |
| |
| MODULE_DESCRIPTION("Renesas RSPI bus driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Yoshihiro Shimoda"); |
| MODULE_ALIAS("platform:rspi"); |