ASoC: TWL4030: Add VIBRA output
This patch adds support for the VIBRA output on TWL4030 codec.
The VIBRA output can be driven with audio data or with
local vibrator driver.
Add the needed DAPM elements and routes for the VIBRA output and
controls for the VIBRA driver configuration.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index 23bae74..1a00e4b 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -396,6 +396,31 @@
static const struct snd_kcontrol_new twl4030_dapm_handsfreer_control =
SOC_DAPM_ENUM("Route", twl4030_handsfreer_enum);
+/* Vibra */
+/* Vibra audio path selection */
+static const char *twl4030_vibra_texts[] =
+ {"AudioL1", "AudioR1", "AudioL2", "AudioR2"};
+
+static const struct soc_enum twl4030_vibra_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 2,
+ ARRAY_SIZE(twl4030_vibra_texts),
+ twl4030_vibra_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_vibra_control =
+SOC_DAPM_ENUM("Route", twl4030_vibra_enum);
+
+/* Vibra path selection: local vibrator (PWM) or audio driven */
+static const char *twl4030_vibrapath_texts[] =
+ {"Local vibrator", "Audio"};
+
+static const struct soc_enum twl4030_vibrapath_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 4,
+ ARRAY_SIZE(twl4030_vibrapath_texts),
+ twl4030_vibrapath_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_vibrapath_control =
+SOC_DAPM_ENUM("Route", twl4030_vibrapath_enum);
+
/* Left analog microphone selection */
static const char *twl4030_analoglmic_texts[] =
{"Off", "Main mic", "Headset mic", "AUXL", "Carkit mic"};
@@ -867,6 +892,26 @@
ARRAY_SIZE(twl4030_rampdelay_texts),
twl4030_rampdelay_texts);
+/* Vibra H-bridge direction mode */
+static const char *twl4030_vibradirmode_texts[] = {
+ "Vibra H-bridge direction", "Audio data MSB",
+};
+
+static const struct soc_enum twl4030_vibradirmode_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 5,
+ ARRAY_SIZE(twl4030_vibradirmode_texts),
+ twl4030_vibradirmode_texts);
+
+/* Vibra H-bridge direction */
+static const char *twl4030_vibradir_texts[] = {
+ "Positive polarity", "Negative polarity",
+};
+
+static const struct soc_enum twl4030_vibradir_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_VIBRA_CTL, 1,
+ ARRAY_SIZE(twl4030_vibradir_texts),
+ twl4030_vibradir_texts);
+
static const struct snd_kcontrol_new twl4030_snd_controls[] = {
/* Common playback gain controls */
SOC_DOUBLE_R_TLV("DAC1 Digital Fine Playback Volume",
@@ -933,6 +978,9 @@
0, 3, 5, 0, input_gain_tlv),
SOC_ENUM("HS ramp delay", twl4030_rampdelay_enum),
+
+ SOC_ENUM("Vibra H-bridge mode", twl4030_vibradirmode_enum),
+ SOC_ENUM("Vibra H-bridge direction", twl4030_vibradir_enum),
};
static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
@@ -960,6 +1008,7 @@
SND_SOC_DAPM_OUTPUT("CARKITR"),
SND_SOC_DAPM_OUTPUT("HFL"),
SND_SOC_DAPM_OUTPUT("HFR"),
+ SND_SOC_DAPM_OUTPUT("VIBRA"),
/* DACs */
SND_SOC_DAPM_DAC("DAC Right1", "Right Front Playback",
@@ -1060,6 +1109,11 @@
SND_SOC_DAPM_MUX_E("HandsfreeR Mux", TWL4030_REG_HFR_CTL, 5, 0,
&twl4030_dapm_handsfreer_control, handsfree_event,
SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+ /* Vibra */
+ SND_SOC_DAPM_MUX("Vibra Mux", TWL4030_REG_VIBRA_CTL, 0, 0,
+ &twl4030_dapm_vibra_control),
+ SND_SOC_DAPM_MUX("Vibra Route", SND_SOC_NOPM, 0, 0,
+ &twl4030_dapm_vibrapath_control),
/* Introducing four virtual ADC, since TWL4030 have four channel for
capture */
@@ -1161,6 +1215,11 @@
{"HandsfreeR Mux", "AudioR1", "ARXR1_APGA"},
{"HandsfreeR Mux", "AudioR2", "ARXR2_APGA"},
{"HandsfreeR Mux", "AudioL2", "ARXL2_APGA"},
+ /* Vibra */
+ {"Vibra Mux", "AudioL1", "DAC Left1"},
+ {"Vibra Mux", "AudioR1", "DAC Right1"},
+ {"Vibra Mux", "AudioL2", "DAC Left2"},
+ {"Vibra Mux", "AudioR2", "DAC Right2"},
/* outputs */
{"OUTL", NULL, "ARXL2_APGA"},
@@ -1174,6 +1233,8 @@
{"CARKITR", NULL, "CarkitR Mixer"},
{"HFL", NULL, "HandsfreeL Mux"},
{"HFR", NULL, "HandsfreeR Mux"},
+ {"Vibra Route", "Audio", "Vibra Mux"},
+ {"VIBRA", NULL, "Vibra Route"},
/* Capture path */
{"Analog Left Capture Route", "Main mic", "MAINMIC"},