arch/arm/mach-shmobile/setup-r8a7790.c - kernel/msm-5.4 - Gitiles

 /*
  * r8a7790 processor support
  *
  * Copyright (C) 2013  Renesas Solutions Corp.
  * Copyright (C) 2013  Magnus Damm
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */

 #include <linux/clocksource.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>

 static struct resource pfc_resources[] __initdata = {
 	DEFINE_RES_MEM(0xe6060000, 0x250),
 };

 #define R8A7790_GPIO(idx)						\
 static struct resource r8a7790_gpio##idx##_resources[] __initdata = {	\
 	DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50),		\
 	DEFINE_RES_IRQ(gic_spi(4 + (idx))),				\
 };									\
 									\
 static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = {	\
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= 0,						\
 	.number_of_pins	= 32,						\
 	.pctl_name	= "pfc-r8a7790",				\
 	.has_both_edge_trigger = 1,					\
 };									\

 R8A7790_GPIO(0);
 R8A7790_GPIO(1);
 R8A7790_GPIO(2);
 R8A7790_GPIO(3);
 R8A7790_GPIO(4);
 R8A7790_GPIO(5);

 #define r8a7790_register_gpio(idx)					\
 	platform_device_register_resndata(&platform_bus, "gpio_rcar", idx, \
 		r8a7790_gpio##idx##_resources,				\
 		ARRAY_SIZE(r8a7790_gpio##idx##_resources),		\
 		&r8a7790_gpio##idx##_platform_data,			\
 		sizeof(r8a7790_gpio##idx##_platform_data))

 void __init r8a7790_pinmux_init(void)
 {
 	platform_device_register_simple("pfc-r8a7790", -1, pfc_resources,
 					ARRAY_SIZE(pfc_resources));
 	r8a7790_register_gpio(0);
 	r8a7790_register_gpio(1);
 	r8a7790_register_gpio(2);
 	r8a7790_register_gpio(3);
 	r8a7790_register_gpio(4);
 	r8a7790_register_gpio(5);
 }

 #define SCIF_COMMON(scif_type, baseaddr, irq)			\
 	.type		= scif_type,				\
 	.mapbase	= baseaddr,				\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
 	.irqs		= SCIx_IRQ_MUXED(irq)

 #define SCIFA_DATA(index, baseaddr, irq)		\
 [index] = {						\
 	SCIF_COMMON(PORT_SCIFA, baseaddr, irq),		\
 	.scbrr_algo_id	= SCBRR_ALGO_4,			\
 	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0,	\
 }

 #define SCIFB_DATA(index, baseaddr, irq)	\
 [index] = {					\
 	SCIF_COMMON(PORT_SCIFB, baseaddr, irq),	\
 	.scbrr_algo_id	= SCBRR_ALGO_4,		\
 	.scscr = SCSCR_RE | SCSCR_TE,		\
 }

 #define SCIF_DATA(index, baseaddr, irq)		\
 [index] = {						\
 	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
 	.scbrr_algo_id	= SCBRR_ALGO_2,			\
 	.scscr = SCSCR_RE | SCSCR_TE,	\
 }

 #define HSCIF_DATA(index, baseaddr, irq)		\
 [index] = {						\
 	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
 	.scbrr_algo_id	= SCBRR_ALGO_6,			\
 	.scscr = SCSCR_RE | SCSCR_TE,	\
 }

 enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
        HSCIF0, HSCIF1 };

 static struct plat_sci_port scif[] __initdata = {
 	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
 	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
 	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
 	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
 	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
 	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
 	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
 	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
 	HSCIF_DATA(HSCIF0, 0xe62c0000, gic_spi(154)), /* HSCIF0 */
 	HSCIF_DATA(HSCIF1, 0xe62c8000, gic_spi(155)), /* HSCIF1 */
 };

 static inline void r8a7790_register_scif(int idx)
 {
 	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
 				      sizeof(struct plat_sci_port));
 }

 static struct renesas_irqc_config irqc0_data __initdata = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 };

 static struct resource irqc0_resources[] __initdata = {
 	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
 	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
 	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
 	DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
 	DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
 };

 #define r8a7790_register_irqc(idx)					\
 	platform_device_register_resndata(&platform_bus, "renesas_irqc", \
 					  idx, irqc##idx##_resources,	\
 					  ARRAY_SIZE(irqc##idx##_resources), \
 					  &irqc##idx##_data,		\
 					  sizeof(struct renesas_irqc_config))

 static struct resource thermal_resources[] __initdata = {
 	DEFINE_RES_MEM(0xe61f0000, 0x14),
 	DEFINE_RES_MEM(0xe61f0100, 0x38),
 	DEFINE_RES_IRQ(gic_spi(69)),
 };

 #define r8a7790_register_thermal()					\
 	platform_device_register_simple("rcar_thermal", -1,		\
 					thermal_resources,		\
 					ARRAY_SIZE(thermal_resources))

 static struct sh_timer_config cmt00_platform_data __initdata = {
 	.name = "CMT00",
 	.timer_bit = 0,
 	.clockevent_rating = 80,
 };

 static struct resource cmt00_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffca0510, 0x0c),
 	DEFINE_RES_MEM(0xffca0500, 0x04),
 	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
 };

 #define r8a7790_register_cmt(idx)					\
 	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
 					  idx, cmt##idx##_resources,	\
 					  ARRAY_SIZE(cmt##idx##_resources), \
 					  &cmt##idx##_platform_data,	\
 					  sizeof(struct sh_timer_config))

 void __init r8a7790_add_dt_devices(void)
 {
 	r8a7790_register_scif(SCIFA0);
 	r8a7790_register_scif(SCIFA1);
 	r8a7790_register_scif(SCIFB0);
 	r8a7790_register_scif(SCIFB1);
 	r8a7790_register_scif(SCIFB2);
 	r8a7790_register_scif(SCIFA2);
 	r8a7790_register_scif(SCIF0);
 	r8a7790_register_scif(SCIF1);
 	r8a7790_register_scif(HSCIF0);
 	r8a7790_register_scif(HSCIF1);
 	r8a7790_register_cmt(00);
 }

 void __init r8a7790_add_standard_devices(void)
 {
 	r8a7790_add_dt_devices();
 	r8a7790_register_irqc(0);
 	r8a7790_register_thermal();
 }

 #define MODEMR 0xe6160060

 u32 __init r8a7790_read_mode_pins(void)
 {
 	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
 	u32 mode;

 	BUG_ON(!modemr);
 	mode = ioread32(modemr);
 	iounmap(modemr);

 	return mode;
 }

 #define CNTCR 0
 #define CNTFID0 0x20

 void __init r8a7790_timer_init(void)
 {
 #ifdef CONFIG_ARM_ARCH_TIMER
 	u32 mode = r8a7790_read_mode_pins();
 	void __iomem *base;
 	int extal_mhz = 0;
 	u32 freq;

 	/* At Linux boot time the r8a7790 arch timer comes up
 	 * with the counter disabled. Moreover, it may also report
 	 * a potentially incorrect fixed 13 MHz frequency. To be
 	 * correct these registers need to be updated to use the
 	 * frequency EXTAL / 2 which can be determined by the MD pins.
 	 */

 	switch (mode & (MD(14) | MD(13))) {
 	case 0:
 		extal_mhz = 15;
 		break;
 	case MD(13):
 		extal_mhz = 20;
 		break;
 	case MD(14):
 		extal_mhz = 26;
 		break;
 	case MD(13) | MD(14):
 		extal_mhz = 30;
 		break;
 	}

 	/* The arch timer frequency equals EXTAL / 2 */
 	freq = extal_mhz * (1000000 / 2);

 	/* Remap "armgcnt address map" space */
 	base = ioremap(0xe6080000, PAGE_SIZE);

 	/* Update registers with correct frequency */
 	iowrite32(freq, base + CNTFID0);
 	asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));

 	/* make sure arch timer is started by setting bit 0 of CNTCR */
 	iowrite32(1, base + CNTCR);
 	iounmap(base);
 #endif /* CONFIG_ARM_ARCH_TIMER */

 	clocksource_of_init();
 }

 void __init r8a7790_init_delay(void)
 {
 #ifndef CONFIG_ARM_ARCH_TIMER
 	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
 #endif
 }

 #ifdef CONFIG_USE_OF

 static const char *r8a7790_boards_compat_dt[] __initdata = {
 	"renesas,r8a7790",
 	NULL,
 };

 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
 	.init_early	= r8a7790_init_delay,
 	.init_time	= r8a7790_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
	/*
	* r8a7790 processor support
	*
	* Copyright (C) 2013 Renesas Solutions Corp.
	* Copyright (C) 2013 Magnus Damm
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; version 2 of the License.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	*/

	#include <linux/clocksource.h>
	#include <linux/irq.h>
	#include <linux/kernel.h>
	#include <linux/of_platform.h>
	#include <linux/platform_data/gpio-rcar.h>
	#include <linux/platform_data/irq-renesas-irqc.h>
	#include <linux/serial_sci.h>
	#include <linux/sh_timer.h>
	#include <mach/common.h>
	#include <mach/irqs.h>
	#include <mach/r8a7790.h>
	#include <asm/mach/arch.h>

	static struct resource pfc_resources[] __initdata = {
	DEFINE_RES_MEM(0xe6060000, 0x250),
	};

	#define R8A7790_GPIO(idx) \
	static struct resource r8a7790_gpio##idx##_resources[] __initdata = { \
	DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50), \
	DEFINE_RES_IRQ(gic_spi(4 + (idx))), \
	}; \
	\
	static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = { \
	.gpio_base = 32 * (idx), \
	.irq_base = 0, \
	.number_of_pins = 32, \
	.pctl_name = "pfc-r8a7790", \
	.has_both_edge_trigger = 1, \
	}; \

	R8A7790_GPIO(0);
	R8A7790_GPIO(1);
	R8A7790_GPIO(2);
	R8A7790_GPIO(3);
	R8A7790_GPIO(4);
	R8A7790_GPIO(5);

	#define r8a7790_register_gpio(idx) \
	platform_device_register_resndata(&platform_bus, "gpio_rcar", idx, \
	r8a7790_gpio##idx##_resources, \
	ARRAY_SIZE(r8a7790_gpio##idx##_resources), \
	&r8a7790_gpio##idx##_platform_data, \
	sizeof(r8a7790_gpio##idx##_platform_data))

	void __init r8a7790_pinmux_init(void)
	{
	platform_device_register_simple("pfc-r8a7790", -1, pfc_resources,
	ARRAY_SIZE(pfc_resources));
	r8a7790_register_gpio(0);
	r8a7790_register_gpio(1);
	r8a7790_register_gpio(2);
	r8a7790_register_gpio(3);
	r8a7790_register_gpio(4);
	r8a7790_register_gpio(5);
	}

	#define SCIF_COMMON(scif_type, baseaddr, irq) \
	.type = scif_type, \
	.mapbase = baseaddr, \
	.flags = UPF_BOOT_AUTOCONF \| UPF_IOREMAP, \
	.irqs = SCIx_IRQ_MUXED(irq)

	#define SCIFA_DATA(index, baseaddr, irq) \
	[index] = { \
	SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \
	.scbrr_algo_id = SCBRR_ALGO_4, \
	.scscr = SCSCR_RE \| SCSCR_TE \| SCSCR_CKE0, \
	}

	#define SCIFB_DATA(index, baseaddr, irq) \
	[index] = { \
	SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \
	.scbrr_algo_id = SCBRR_ALGO_4, \
	.scscr = SCSCR_RE \| SCSCR_TE, \
	}

	#define SCIF_DATA(index, baseaddr, irq) \
	[index] = { \
	SCIF_COMMON(PORT_SCIF, baseaddr, irq), \
	.scbrr_algo_id = SCBRR_ALGO_2, \
	.scscr = SCSCR_RE \| SCSCR_TE, \
	}

	#define HSCIF_DATA(index, baseaddr, irq) \
	[index] = { \
	SCIF_COMMON(PORT_HSCIF, baseaddr, irq), \
	.scbrr_algo_id = SCBRR_ALGO_6, \
	.scscr = SCSCR_RE \| SCSCR_TE, \
	}

	enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
	HSCIF0, HSCIF1 };

	static struct plat_sci_port scif[] __initdata = {
	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
	HSCIF_DATA(HSCIF0, 0xe62c0000, gic_spi(154)), /* HSCIF0 */
	HSCIF_DATA(HSCIF1, 0xe62c8000, gic_spi(155)), /* HSCIF1 */
	};

	static inline void r8a7790_register_scif(int idx)
	{
	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
	sizeof(struct plat_sci_port));
	}

	static struct renesas_irqc_config irqc0_data __initdata = {
	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
	};

	static struct resource irqc0_resources[] __initdata = {
	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
	DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
	DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
	};

	#define r8a7790_register_irqc(idx) \
	platform_device_register_resndata(&platform_bus, "renesas_irqc", \
	idx, irqc##idx##_resources, \
	ARRAY_SIZE(irqc##idx##_resources), \
	&irqc##idx##_data, \
	sizeof(struct renesas_irqc_config))

	static struct resource thermal_resources[] __initdata = {
	DEFINE_RES_MEM(0xe61f0000, 0x14),
	DEFINE_RES_MEM(0xe61f0100, 0x38),
	DEFINE_RES_IRQ(gic_spi(69)),
	};

	#define r8a7790_register_thermal() \
	platform_device_register_simple("rcar_thermal", -1, \
	thermal_resources, \
	ARRAY_SIZE(thermal_resources))

	static struct sh_timer_config cmt00_platform_data __initdata = {
	.name = "CMT00",
	.timer_bit = 0,
	.clockevent_rating = 80,
	};

	static struct resource cmt00_resources[] __initdata = {
	DEFINE_RES_MEM(0xffca0510, 0x0c),
	DEFINE_RES_MEM(0xffca0500, 0x04),
	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
	};

	#define r8a7790_register_cmt(idx) \
	platform_device_register_resndata(&platform_bus, "sh_cmt", \
	idx, cmt##idx##_resources, \
	ARRAY_SIZE(cmt##idx##_resources), \
	&cmt##idx##_platform_data, \
	sizeof(struct sh_timer_config))

	void __init r8a7790_add_dt_devices(void)
	{
	r8a7790_register_scif(SCIFA0);
	r8a7790_register_scif(SCIFA1);
	r8a7790_register_scif(SCIFB0);
	r8a7790_register_scif(SCIFB1);
	r8a7790_register_scif(SCIFB2);
	r8a7790_register_scif(SCIFA2);
	r8a7790_register_scif(SCIF0);
	r8a7790_register_scif(SCIF1);
	r8a7790_register_scif(HSCIF0);
	r8a7790_register_scif(HSCIF1);
	r8a7790_register_cmt(00);
	}

	void __init r8a7790_add_standard_devices(void)
	{
	r8a7790_add_dt_devices();
	r8a7790_register_irqc(0);
	r8a7790_register_thermal();
	}

	#define MODEMR 0xe6160060

	u32 __init r8a7790_read_mode_pins(void)
	{
	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
	u32 mode;

	BUG_ON(!modemr);
	mode = ioread32(modemr);
	iounmap(modemr);

	return mode;
	}

	#define CNTCR 0
	#define CNTFID0 0x20

	void __init r8a7790_timer_init(void)
	{
	#ifdef CONFIG_ARM_ARCH_TIMER
	u32 mode = r8a7790_read_mode_pins();
	void __iomem *base;
	int extal_mhz = 0;
	u32 freq;

	/* At Linux boot time the r8a7790 arch timer comes up
	* with the counter disabled. Moreover, it may also report
	* a potentially incorrect fixed 13 MHz frequency. To be
	* correct these registers need to be updated to use the
	* frequency EXTAL / 2 which can be determined by the MD pins.
	*/

	switch (mode & (MD(14) \| MD(13))) {
	case 0:
	extal_mhz = 15;
	break;
	case MD(13):
	extal_mhz = 20;
	break;
	case MD(14):
	extal_mhz = 26;
	break;
	case MD(13) \| MD(14):
	extal_mhz = 30;
	break;
	}

	/* The arch timer frequency equals EXTAL / 2 */
	freq = extal_mhz * (1000000 / 2);

	/* Remap "armgcnt address map" space */
	base = ioremap(0xe6080000, PAGE_SIZE);

	/* Update registers with correct frequency */
	iowrite32(freq, base + CNTFID0);
	asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));

	/* make sure arch timer is started by setting bit 0 of CNTCR */
	iowrite32(1, base + CNTCR);
	iounmap(base);
	#endif /* CONFIG_ARM_ARCH_TIMER */

	clocksource_of_init();
	}

	void __init r8a7790_init_delay(void)
	{
	#ifndef CONFIG_ARM_ARCH_TIMER
	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
	#endif
	}

	#ifdef CONFIG_USE_OF

	static const char *r8a7790_boards_compat_dt[] __initdata = {
	"renesas,r8a7790",
	NULL,
	};

	DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
	.init_early = r8a7790_init_delay,
	.init_time = r8a7790_timer_init,
	.dt_compat = r8a7790_boards_compat_dt,
	MACHINE_END
	#endif /* CONFIG_USE_OF */