include/drm/drm_device.h - kernel/msm-5.4 - Gitiles

 #ifndef _DRM_DEVICE_H_
 #define _DRM_DEVICE_H_

 #include <linux/list.h>
 #include <linux/kref.h>
 #include <linux/mutex.h>
 #include <linux/idr.h>

 #include <drm/drm_hashtab.h>
 #include <drm/drm_mode_config.h>

 struct drm_driver;
 struct drm_minor;
 struct drm_master;
 struct drm_device_dma;
 struct drm_vblank_crtc;
 struct drm_sg_mem;
 struct drm_local_map;
 struct drm_vma_offset_manager;
 struct drm_fb_helper;

 struct inode;

 struct pci_dev;
 struct pci_controller;


 /**
  * enum drm_switch_power - power state of drm device
  */

 enum switch_power_state {
 	/** @DRM_SWITCH_POWER_ON: Power state is ON */
 	DRM_SWITCH_POWER_ON = 0,

 	/** @DRM_SWITCH_POWER_OFF: Power state is OFF */
 	DRM_SWITCH_POWER_OFF = 1,

 	/** @DRM_SWITCH_POWER_CHANGING: Power state is changing */
 	DRM_SWITCH_POWER_CHANGING = 2,

 	/** @DRM_SWITCH_POWER_DYNAMIC_OFF: Suspended */
 	DRM_SWITCH_POWER_DYNAMIC_OFF = 3,
 };

 /**
  * struct drm_device - DRM device structure
  *
  * This structure represent a complete card that
  * may contain multiple heads.
  */
 struct drm_device {
 	/**
 	 * @legacy_dev_list:
 	 *
 	 * List of devices per driver for stealth attach cleanup
 	 */
 	struct list_head legacy_dev_list;

 	/** @if_version: Highest interface version set */
 	int if_version;

 	/** @ref: Object ref-count */
 	struct kref ref;

 	/** @dev: Device structure of bus-device */
 	struct device *dev;

 	/** @driver: DRM driver managing the device */
 	struct drm_driver *driver;

 	/**
 	 * @dev_private:
 	 *
 	 * DRM driver private data. Instead of using this pointer it is
 	 * recommended that drivers use drm_dev_init() and embed struct
 	 * &drm_device in their larger per-device structure.
 	 */
 	void *dev_private;

 	/** @primary: Primary node */
 	struct drm_minor *primary;

 	/** @render: Render node */
 	struct drm_minor *render;

 	/**
 	 * @registered:
 	 *
 	 * Internally used by drm_dev_register() and drm_connector_register().
 	 */
 	bool registered;

 	/**
 	 * @master:
 	 *
 	 * Currently active master for this device.
 	 * Protected by &master_mutex
 	 */
 	struct drm_master *master;

 	/**
 	 * @driver_features: per-device driver features
 	 *
 	 * Drivers can clear specific flags here to disallow
 	 * certain features on a per-device basis while still
 	 * sharing a single &struct drm_driver instance across
 	 * all devices.
 	 */
 	u32 driver_features;

 	/**
 	 * @unplugged:
 	 *
 	 * Flag to tell if the device has been unplugged.
 	 * See drm_dev_enter() and drm_dev_is_unplugged().
 	 */
 	bool unplugged;

 	/** @anon_inode: inode for private address-space */
 	struct inode *anon_inode;

 	/** @unique: Unique name of the device */
 	char *unique;

 	/**
 	 * @struct_mutex:
 	 *
 	 * Lock for others (not &drm_minor.master and &drm_file.is_master)
 	 */
 	struct mutex struct_mutex;

 	/**
 	 * @master_mutex:
 	 *
 	 * Lock for &drm_minor.master and &drm_file.is_master
 	 */
 	struct mutex master_mutex;

 	/**
 	 * @open_count:
 	 *
 	 * Usage counter for outstanding files open,
 	 * protected by drm_global_mutex
 	 */
 	int open_count;

 	/** @filelist_mutex: Protects @filelist. */
 	struct mutex filelist_mutex;
 	/**
 	 * @filelist:
 	 *
 	 * List of userspace clients, linked through &drm_file.lhead.
 	 */
 	struct list_head filelist;

 	/**
 	 * @filelist_internal:
 	 *
 	 * List of open DRM files for in-kernel clients.
 	 * Protected by &filelist_mutex.
 	 */
 	struct list_head filelist_internal;

 	/**
 	 * @clientlist_mutex:
 	 *
 	 * Protects &clientlist access.
 	 */
 	struct mutex clientlist_mutex;

 	/**
 	 * @clientlist:
 	 *
 	 * List of in-kernel clients. Protected by &clientlist_mutex.
 	 */
 	struct list_head clientlist;

 	/**
 	 * @irq_enabled:
 	 *
 	 * Indicates that interrupt handling is enabled, specifically vblank
 	 * handling. Drivers which don't use drm_irq_install() need to set this
 	 * to true manually.
 	 */
 	bool irq_enabled;

 	/**
 	 * @irq: Used by the drm_irq_install() and drm_irq_unistall() helpers.
 	 */
 	int irq;

 	/**
 	 * @vblank_disable_immediate:
 	 *
 	 * If true, vblank interrupt will be disabled immediately when the
 	 * refcount drops to zero, as opposed to via the vblank disable
 	 * timer.
 	 *
 	 * This can be set to true it the hardware has a working vblank counter
 	 * with high-precision timestamping (otherwise there are races) and the
 	 * driver uses drm_crtc_vblank_on() and drm_crtc_vblank_off()
 	 * appropriately. See also @max_vblank_count and
 	 * &drm_crtc_funcs.get_vblank_counter.
 	 */
 	bool vblank_disable_immediate;

 	/**
 	 * @vblank:
 	 *
 	 * Array of vblank tracking structures, one per &struct drm_crtc. For
 	 * historical reasons (vblank support predates kernel modesetting) this
 	 * is free-standing and not part of &struct drm_crtc itself. It must be
 	 * initialized explicitly by calling drm_vblank_init().
 	 */
 	struct drm_vblank_crtc *vblank;

 	/**
 	 * @vblank_time_lock:
 	 *
 	 *  Protects vblank count and time updates during vblank enable/disable
 	 */
 	spinlock_t vblank_time_lock;
 	/**
 	 * @vbl_lock: Top-level vblank references lock, wraps the low-level
 	 * @vblank_time_lock.
 	 */
 	spinlock_t vbl_lock;

 	/**
 	 * @max_vblank_count:
 	 *
 	 * Maximum value of the vblank registers. This value +1 will result in a
 	 * wrap-around of the vblank register. It is used by the vblank core to
 	 * handle wrap-arounds.
 	 *
 	 * If set to zero the vblank core will try to guess the elapsed vblanks
 	 * between times when the vblank interrupt is disabled through
 	 * high-precision timestamps. That approach is suffering from small
 	 * races and imprecision over longer time periods, hence exposing a
 	 * hardware vblank counter is always recommended.
 	 *
 	 * This is the statically configured device wide maximum. The driver
 	 * can instead choose to use a runtime configurable per-crtc value
 	 * &drm_vblank_crtc.max_vblank_count, in which case @max_vblank_count
 	 * must be left at zero. See drm_crtc_set_max_vblank_count() on how
 	 * to use the per-crtc value.
 	 *
 	 * If non-zero, &drm_crtc_funcs.get_vblank_counter must be set.
 	 */
 	u32 max_vblank_count;

 	/** @vblank_event_list: List of vblank events */
 	struct list_head vblank_event_list;

 	/**
 	 * @event_lock:
 	 *
 	 * Protects @vblank_event_list and event delivery in
 	 * general. See drm_send_event() and drm_send_event_locked().
 	 */
 	spinlock_t event_lock;

 	/** @agp: AGP data */
 	struct drm_agp_head *agp;

 	/** @pdev: PCI device structure */
 	struct pci_dev *pdev;

 #ifdef __alpha__
 	/** @hose: PCI hose, only used on ALPHA platforms. */
 	struct pci_controller *hose;
 #endif
 	/** @num_crtcs: Number of CRTCs on this device */
 	unsigned int num_crtcs;

 	/** @mode_config: Current mode config */
 	struct drm_mode_config mode_config;

 	/** @object_name_lock: GEM information */
 	struct mutex object_name_lock;

 	/** @object_name_idr: GEM information */
 	struct idr object_name_idr;

 	/** @vma_offset_manager: GEM information */
 	struct drm_vma_offset_manager *vma_offset_manager;

 	/**
 	 * @switch_power_state:
 	 *
 	 * Power state of the client.
 	 * Used by drivers supporting the switcheroo driver.
 	 * The state is maintained in the
 	 * &vga_switcheroo_client_ops.set_gpu_state callback
 	 */
 	enum switch_power_state switch_power_state;

 	/**
 	 * @fb_helper:
 	 *
 	 * Pointer to the fbdev emulation structure.
 	 * Set by drm_fb_helper_init() and cleared by drm_fb_helper_fini().
 	 */
 	struct drm_fb_helper *fb_helper;

 	/* Everything below here is for legacy driver, never use! */
 	/* private: */
 #if IS_ENABLED(CONFIG_DRM_LEGACY)
 	/* Context handle management - linked list of context handles */
 	struct list_head ctxlist;

 	/* Context handle management - mutex for &ctxlist */
 	struct mutex ctxlist_mutex;

 	/* Context handle management */
 	struct idr ctx_idr;

 	/* Memory management - linked list of regions */
 	struct list_head maplist;

 	/* Memory management - user token hash table for maps */
 	struct drm_open_hash map_hash;

 	/* Context handle management - list of vmas (for debugging) */
 	struct list_head vmalist;

 	/* Optional pointer for DMA support */
 	struct drm_device_dma *dma;

 	/* Context swapping flag */
 	__volatile__ long context_flag;

 	/* Last current context */
 	int last_context;

 	/* Lock for &buf_use and a few other things. */
 	spinlock_t buf_lock;

 	/* Usage counter for buffers in use -- cannot alloc */
 	int buf_use;

 	/* Buffer allocation in progress */
 	atomic_t buf_alloc;

 	struct {
 		int context;
 		struct drm_hw_lock *lock;
 	} sigdata;

 	struct drm_local_map *agp_buffer_map;
 	unsigned int agp_buffer_token;

 	/* Scatter gather memory */
 	struct drm_sg_mem *sg;
 #endif
 };

 #endif
	#ifndef _DRM_DEVICE_H_
	#define _DRM_DEVICE_H_

	#include <linux/list.h>
	#include <linux/kref.h>
	#include <linux/mutex.h>
	#include <linux/idr.h>

	#include <drm/drm_hashtab.h>
	#include <drm/drm_mode_config.h>

	struct drm_driver;
	struct drm_minor;
	struct drm_master;
	struct drm_device_dma;
	struct drm_vblank_crtc;
	struct drm_sg_mem;
	struct drm_local_map;
	struct drm_vma_offset_manager;
	struct drm_fb_helper;

	struct inode;

	struct pci_dev;
	struct pci_controller;


	/**
	* enum drm_switch_power - power state of drm device
	*/

	enum switch_power_state {
	/** @DRM_SWITCH_POWER_ON: Power state is ON */
	DRM_SWITCH_POWER_ON = 0,

	/** @DRM_SWITCH_POWER_OFF: Power state is OFF */
	DRM_SWITCH_POWER_OFF = 1,

	/** @DRM_SWITCH_POWER_CHANGING: Power state is changing */
	DRM_SWITCH_POWER_CHANGING = 2,

	/** @DRM_SWITCH_POWER_DYNAMIC_OFF: Suspended */
	DRM_SWITCH_POWER_DYNAMIC_OFF = 3,
	};

	/**
	* struct drm_device - DRM device structure
	*
	* This structure represent a complete card that
	* may contain multiple heads.
	*/
	struct drm_device {
	/**
	* @legacy_dev_list:
	*
	* List of devices per driver for stealth attach cleanup
	*/
	struct list_head legacy_dev_list;

	/** @if_version: Highest interface version set */
	int if_version;

	/** @ref: Object ref-count */
	struct kref ref;

	/** @dev: Device structure of bus-device */
	struct device *dev;

	/** @driver: DRM driver managing the device */
	struct drm_driver *driver;

	/**
	* @dev_private:
	*
	* DRM driver private data. Instead of using this pointer it is
	* recommended that drivers use drm_dev_init() and embed struct
	* &drm_device in their larger per-device structure.
	*/
	void *dev_private;

	/** @primary: Primary node */
	struct drm_minor *primary;

	/** @render: Render node */
	struct drm_minor *render;

	/**
	* @registered:
	*
	* Internally used by drm_dev_register() and drm_connector_register().
	*/
	bool registered;

	/**
	* @master:
	*
	* Currently active master for this device.
	* Protected by &master_mutex
	*/
	struct drm_master *master;

	/**
	* @driver_features: per-device driver features
	*
	* Drivers can clear specific flags here to disallow
	* certain features on a per-device basis while still
	* sharing a single &struct drm_driver instance across
	* all devices.
	*/
	u32 driver_features;

	/**
	* @unplugged:
	*
	* Flag to tell if the device has been unplugged.
	* See drm_dev_enter() and drm_dev_is_unplugged().
	*/
	bool unplugged;

	/** @anon_inode: inode for private address-space */
	struct inode *anon_inode;

	/** @unique: Unique name of the device */
	char *unique;

	/**
	* @struct_mutex:
	*
	* Lock for others (not &drm_minor.master and &drm_file.is_master)
	*/
	struct mutex struct_mutex;

	/**
	* @master_mutex:
	*
	* Lock for &drm_minor.master and &drm_file.is_master
	*/
	struct mutex master_mutex;

	/**
	* @open_count:
	*
	* Usage counter for outstanding files open,
	* protected by drm_global_mutex
	*/
	int open_count;

	/** @filelist_mutex: Protects @filelist. */
	struct mutex filelist_mutex;
	/**
	* @filelist:
	*
	* List of userspace clients, linked through &drm_file.lhead.
	*/
	struct list_head filelist;

	/**
	* @filelist_internal:
	*
	* List of open DRM files for in-kernel clients.
	* Protected by &filelist_mutex.
	*/
	struct list_head filelist_internal;

	/**
	* @clientlist_mutex:
	*
	* Protects &clientlist access.
	*/
	struct mutex clientlist_mutex;

	/**
	* @clientlist:
	*
	* List of in-kernel clients. Protected by &clientlist_mutex.
	*/
	struct list_head clientlist;

	/**
	* @irq_enabled:
	*
	* Indicates that interrupt handling is enabled, specifically vblank
	* handling. Drivers which don't use drm_irq_install() need to set this
	* to true manually.
	*/
	bool irq_enabled;

	/**
	* @irq: Used by the drm_irq_install() and drm_irq_unistall() helpers.
	*/
	int irq;

	/**
	* @vblank_disable_immediate:
	*
	* If true, vblank interrupt will be disabled immediately when the
	* refcount drops to zero, as opposed to via the vblank disable
	* timer.
	*
	* This can be set to true it the hardware has a working vblank counter
	* with high-precision timestamping (otherwise there are races) and the
	* driver uses drm_crtc_vblank_on() and drm_crtc_vblank_off()
	* appropriately. See also @max_vblank_count and
	* &drm_crtc_funcs.get_vblank_counter.
	*/
	bool vblank_disable_immediate;

	/**
	* @vblank:
	*
	* Array of vblank tracking structures, one per &struct drm_crtc. For
	* historical reasons (vblank support predates kernel modesetting) this
	* is free-standing and not part of &struct drm_crtc itself. It must be
	* initialized explicitly by calling drm_vblank_init().
	*/
	struct drm_vblank_crtc *vblank;

	/**
	* @vblank_time_lock:
	*
	* Protects vblank count and time updates during vblank enable/disable
	*/
	spinlock_t vblank_time_lock;
	/**
	* @vbl_lock: Top-level vblank references lock, wraps the low-level
	* @vblank_time_lock.
	*/
	spinlock_t vbl_lock;

	/**
	* @max_vblank_count:
	*
	* Maximum value of the vblank registers. This value +1 will result in a
	* wrap-around of the vblank register. It is used by the vblank core to
	* handle wrap-arounds.
	*
	* If set to zero the vblank core will try to guess the elapsed vblanks
	* between times when the vblank interrupt is disabled through
	* high-precision timestamps. That approach is suffering from small
	* races and imprecision over longer time periods, hence exposing a
	* hardware vblank counter is always recommended.
	*
	* This is the statically configured device wide maximum. The driver
	* can instead choose to use a runtime configurable per-crtc value
	* &drm_vblank_crtc.max_vblank_count, in which case @max_vblank_count
	* must be left at zero. See drm_crtc_set_max_vblank_count() on how
	* to use the per-crtc value.
	*
	* If non-zero, &drm_crtc_funcs.get_vblank_counter must be set.
	*/
	u32 max_vblank_count;

	/** @vblank_event_list: List of vblank events */
	struct list_head vblank_event_list;

	/**
	* @event_lock:
	*
	* Protects @vblank_event_list and event delivery in
	* general. See drm_send_event() and drm_send_event_locked().
	*/
	spinlock_t event_lock;

	/** @agp: AGP data */
	struct drm_agp_head *agp;

	/** @pdev: PCI device structure */
	struct pci_dev *pdev;

	#ifdef __alpha__
	/** @hose: PCI hose, only used on ALPHA platforms. */
	struct pci_controller *hose;
	#endif
	/** @num_crtcs: Number of CRTCs on this device */
	unsigned int num_crtcs;

	/** @mode_config: Current mode config */
	struct drm_mode_config mode_config;

	/** @object_name_lock: GEM information */
	struct mutex object_name_lock;

	/** @object_name_idr: GEM information */
	struct idr object_name_idr;

	/** @vma_offset_manager: GEM information */
	struct drm_vma_offset_manager *vma_offset_manager;

	/**
	* @switch_power_state:
	*
	* Power state of the client.
	* Used by drivers supporting the switcheroo driver.
	* The state is maintained in the
	* &vga_switcheroo_client_ops.set_gpu_state callback
	*/
	enum switch_power_state switch_power_state;

	/**
	* @fb_helper:
	*
	* Pointer to the fbdev emulation structure.
	* Set by drm_fb_helper_init() and cleared by drm_fb_helper_fini().
	*/
	struct drm_fb_helper *fb_helper;

	/* Everything below here is for legacy driver, never use! */
	/* private: */
	#if IS_ENABLED(CONFIG_DRM_LEGACY)
	/* Context handle management - linked list of context handles */
	struct list_head ctxlist;

	/* Context handle management - mutex for &ctxlist */
	struct mutex ctxlist_mutex;

	/* Context handle management */
	struct idr ctx_idr;

	/* Memory management - linked list of regions */
	struct list_head maplist;

	/* Memory management - user token hash table for maps */
	struct drm_open_hash map_hash;

	/* Context handle management - list of vmas (for debugging) */
	struct list_head vmalist;

	/* Optional pointer for DMA support */
	struct drm_device_dma *dma;

	/* Context swapping flag */
	__volatile__ long context_flag;

	/* Last current context */
	int last_context;

	/* Lock for &buf_use and a few other things. */
	spinlock_t buf_lock;

	/* Usage counter for buffers in use -- cannot alloc */
	int buf_use;

	/* Buffer allocation in progress */
	atomic_t buf_alloc;

	struct {
	int context;
	struct drm_hw_lock *lock;
	} sigdata;

	struct drm_local_map *agp_buffer_map;
	unsigned int agp_buffer_token;

	/* Scatter gather memory */
	struct drm_sg_mem *sg;
	#endif
	};

	#endif