| /* |
| * Copyright © 2006-2011 Intel Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| * Patrik Jakobsson <patrik.r.jakobsson@gmail.com> |
| */ |
| |
| #include <drm/drmP.h> |
| #include "gma_display.h" |
| #include "psb_intel_drv.h" |
| #include "psb_intel_reg.h" |
| #include "psb_drv.h" |
| #include "framebuffer.h" |
| |
| /** |
| * Returns whether any output on the specified pipe is of the specified type |
| */ |
| bool gma_pipe_has_type(struct drm_crtc *crtc, int type) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_mode_config *mode_config = &dev->mode_config; |
| struct drm_connector *l_entry; |
| |
| list_for_each_entry(l_entry, &mode_config->connector_list, head) { |
| if (l_entry->encoder && l_entry->encoder->crtc == crtc) { |
| struct gma_encoder *gma_encoder = |
| gma_attached_encoder(l_entry); |
| if (gma_encoder->type == type) |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| void gma_wait_for_vblank(struct drm_device *dev) |
| { |
| /* Wait for 20ms, i.e. one cycle at 50hz. */ |
| mdelay(20); |
| } |
| |
| int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y, |
| struct drm_framebuffer *old_fb) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct gma_crtc *gma_crtc = to_gma_crtc(crtc); |
| struct drm_framebuffer *fb = crtc->primary->fb; |
| struct psb_framebuffer *psbfb = to_psb_fb(fb); |
| int pipe = gma_crtc->pipe; |
| const struct psb_offset *map = &dev_priv->regmap[pipe]; |
| unsigned long start, offset; |
| u32 dspcntr; |
| int ret = 0; |
| |
| if (!gma_power_begin(dev, true)) |
| return 0; |
| |
| /* no fb bound */ |
| if (!fb) { |
| dev_err(dev->dev, "No FB bound\n"); |
| goto gma_pipe_cleaner; |
| } |
| |
| /* We are displaying this buffer, make sure it is actually loaded |
| into the GTT */ |
| ret = psb_gtt_pin(psbfb->gtt); |
| if (ret < 0) |
| goto gma_pipe_set_base_exit; |
| start = psbfb->gtt->offset; |
| offset = y * fb->pitches[0] + x * fb->format->cpp[0]; |
| |
| REG_WRITE(map->stride, fb->pitches[0]); |
| |
| dspcntr = REG_READ(map->cntr); |
| dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; |
| |
| switch (fb->format->cpp[0] * 8) { |
| case 8: |
| dspcntr |= DISPPLANE_8BPP; |
| break; |
| case 16: |
| if (fb->format->depth == 15) |
| dspcntr |= DISPPLANE_15_16BPP; |
| else |
| dspcntr |= DISPPLANE_16BPP; |
| break; |
| case 24: |
| case 32: |
| dspcntr |= DISPPLANE_32BPP_NO_ALPHA; |
| break; |
| default: |
| dev_err(dev->dev, "Unknown color depth\n"); |
| ret = -EINVAL; |
| goto gma_pipe_set_base_exit; |
| } |
| REG_WRITE(map->cntr, dspcntr); |
| |
| dev_dbg(dev->dev, |
| "Writing base %08lX %08lX %d %d\n", start, offset, x, y); |
| |
| /* FIXME: Investigate whether this really is the base for psb and why |
| the linear offset is named base for the other chips. map->surf |
| should be the base and map->linoff the offset for all chips */ |
| if (IS_PSB(dev)) { |
| REG_WRITE(map->base, offset + start); |
| REG_READ(map->base); |
| } else { |
| REG_WRITE(map->base, offset); |
| REG_READ(map->base); |
| REG_WRITE(map->surf, start); |
| REG_READ(map->surf); |
| } |
| |
| gma_pipe_cleaner: |
| /* If there was a previous display we can now unpin it */ |
| if (old_fb) |
| psb_gtt_unpin(to_psb_fb(old_fb)->gtt); |
| |
| gma_pipe_set_base_exit: |
| gma_power_end(dev); |
| return ret; |
| } |
| |
| /* Loads the palette/gamma unit for the CRTC with the prepared values */ |
| void gma_crtc_load_lut(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct gma_crtc *gma_crtc = to_gma_crtc(crtc); |
| const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; |
| int palreg = map->palette; |
| int i; |
| |
| /* The clocks have to be on to load the palette. */ |
| if (!crtc->enabled) |
| return; |
| |
| if (gma_power_begin(dev, false)) { |
| for (i = 0; i < 256; i++) { |
| REG_WRITE(palreg + 4 * i, |
| ((gma_crtc->lut_r[i] + |
| gma_crtc->lut_adj[i]) << 16) | |
| ((gma_crtc->lut_g[i] + |
| gma_crtc->lut_adj[i]) << 8) | |
| (gma_crtc->lut_b[i] + |
| gma_crtc->lut_adj[i])); |
| } |
| gma_power_end(dev); |
| } else { |
| for (i = 0; i < 256; i++) { |
| /* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */ |
| dev_priv->regs.pipe[0].palette[i] = |
| ((gma_crtc->lut_r[i] + |
| gma_crtc->lut_adj[i]) << 16) | |
| ((gma_crtc->lut_g[i] + |
| gma_crtc->lut_adj[i]) << 8) | |
| (gma_crtc->lut_b[i] + |
| gma_crtc->lut_adj[i]); |
| } |
| |
| } |
| } |
| |
| int gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, |
| u32 size) |
| { |
| struct gma_crtc *gma_crtc = to_gma_crtc(crtc); |
| int i; |
| |
| for (i = 0; i < size; i++) { |
| gma_crtc->lut_r[i] = red[i] >> 8; |
| gma_crtc->lut_g[i] = green[i] >> 8; |
| gma_crtc->lut_b[i] = blue[i] >> 8; |
| } |
| |
| gma_crtc_load_lut(crtc); |
| |
| return 0; |
| } |
| |
| /** |
| * Sets the power management mode of the pipe and plane. |
| * |
| * This code should probably grow support for turning the cursor off and back |
| * on appropriately at the same time as we're turning the pipe off/on. |
| */ |
| void gma_crtc_dpms(struct drm_crtc *crtc, int mode) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct gma_crtc *gma_crtc = to_gma_crtc(crtc); |
| int pipe = gma_crtc->pipe; |
| const struct psb_offset *map = &dev_priv->regmap[pipe]; |
| u32 temp; |
| |
| /* XXX: When our outputs are all unaware of DPMS modes other than off |
| * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. |
| */ |
| |
| if (IS_CDV(dev)) |
| dev_priv->ops->disable_sr(dev); |
| |
| switch (mode) { |
| case DRM_MODE_DPMS_ON: |
| case DRM_MODE_DPMS_STANDBY: |
| case DRM_MODE_DPMS_SUSPEND: |
| if (gma_crtc->active) |
| break; |
| |
| gma_crtc->active = true; |
| |
| /* Enable the DPLL */ |
| temp = REG_READ(map->dpll); |
| if ((temp & DPLL_VCO_ENABLE) == 0) { |
| REG_WRITE(map->dpll, temp); |
| REG_READ(map->dpll); |
| /* Wait for the clocks to stabilize. */ |
| udelay(150); |
| REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); |
| REG_READ(map->dpll); |
| /* Wait for the clocks to stabilize. */ |
| udelay(150); |
| REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); |
| REG_READ(map->dpll); |
| /* Wait for the clocks to stabilize. */ |
| udelay(150); |
| } |
| |
| /* Enable the plane */ |
| temp = REG_READ(map->cntr); |
| if ((temp & DISPLAY_PLANE_ENABLE) == 0) { |
| REG_WRITE(map->cntr, |
| temp | DISPLAY_PLANE_ENABLE); |
| /* Flush the plane changes */ |
| REG_WRITE(map->base, REG_READ(map->base)); |
| } |
| |
| udelay(150); |
| |
| /* Enable the pipe */ |
| temp = REG_READ(map->conf); |
| if ((temp & PIPEACONF_ENABLE) == 0) |
| REG_WRITE(map->conf, temp | PIPEACONF_ENABLE); |
| |
| temp = REG_READ(map->status); |
| temp &= ~(0xFFFF); |
| temp |= PIPE_FIFO_UNDERRUN; |
| REG_WRITE(map->status, temp); |
| REG_READ(map->status); |
| |
| gma_crtc_load_lut(crtc); |
| |
| /* Give the overlay scaler a chance to enable |
| * if it's on this pipe */ |
| /* psb_intel_crtc_dpms_video(crtc, true); TODO */ |
| break; |
| case DRM_MODE_DPMS_OFF: |
| if (!gma_crtc->active) |
| break; |
| |
| gma_crtc->active = false; |
| |
| /* Give the overlay scaler a chance to disable |
| * if it's on this pipe */ |
| /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ |
| |
| /* Disable the VGA plane that we never use */ |
| REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); |
| |
| /* Turn off vblank interrupts */ |
| drm_crtc_vblank_off(crtc); |
| |
| /* Wait for vblank for the disable to take effect */ |
| gma_wait_for_vblank(dev); |
| |
| /* Disable plane */ |
| temp = REG_READ(map->cntr); |
| if ((temp & DISPLAY_PLANE_ENABLE) != 0) { |
| REG_WRITE(map->cntr, |
| temp & ~DISPLAY_PLANE_ENABLE); |
| /* Flush the plane changes */ |
| REG_WRITE(map->base, REG_READ(map->base)); |
| REG_READ(map->base); |
| } |
| |
| /* Disable pipe */ |
| temp = REG_READ(map->conf); |
| if ((temp & PIPEACONF_ENABLE) != 0) { |
| REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE); |
| REG_READ(map->conf); |
| } |
| |
| /* Wait for vblank for the disable to take effect. */ |
| gma_wait_for_vblank(dev); |
| |
| udelay(150); |
| |
| /* Disable DPLL */ |
| temp = REG_READ(map->dpll); |
| if ((temp & DPLL_VCO_ENABLE) != 0) { |
| REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE); |
| REG_READ(map->dpll); |
| } |
| |
| /* Wait for the clocks to turn off. */ |
| udelay(150); |
| break; |
| } |
| |
| if (IS_CDV(dev)) |
| dev_priv->ops->update_wm(dev, crtc); |
| |
| /* Set FIFO watermarks */ |
| REG_WRITE(DSPARB, 0x3F3E); |
| } |
| |
| int gma_crtc_cursor_set(struct drm_crtc *crtc, |
| struct drm_file *file_priv, |
| uint32_t handle, |
| uint32_t width, uint32_t height) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct gma_crtc *gma_crtc = to_gma_crtc(crtc); |
| int pipe = gma_crtc->pipe; |
| uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; |
| uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; |
| uint32_t temp; |
| size_t addr = 0; |
| struct gtt_range *gt; |
| struct gtt_range *cursor_gt = gma_crtc->cursor_gt; |
| struct drm_gem_object *obj; |
| void *tmp_dst, *tmp_src; |
| int ret = 0, i, cursor_pages; |
| |
| /* If we didn't get a handle then turn the cursor off */ |
| if (!handle) { |
| temp = CURSOR_MODE_DISABLE; |
| if (gma_power_begin(dev, false)) { |
| REG_WRITE(control, temp); |
| REG_WRITE(base, 0); |
| gma_power_end(dev); |
| } |
| |
| /* Unpin the old GEM object */ |
| if (gma_crtc->cursor_obj) { |
| gt = container_of(gma_crtc->cursor_obj, |
| struct gtt_range, gem); |
| psb_gtt_unpin(gt); |
| drm_gem_object_unreference_unlocked(gma_crtc->cursor_obj); |
| gma_crtc->cursor_obj = NULL; |
| } |
| return 0; |
| } |
| |
| /* Currently we only support 64x64 cursors */ |
| if (width != 64 || height != 64) { |
| dev_dbg(dev->dev, "We currently only support 64x64 cursors\n"); |
| return -EINVAL; |
| } |
| |
| obj = drm_gem_object_lookup(file_priv, handle); |
| if (!obj) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| |
| if (obj->size < width * height * 4) { |
| dev_dbg(dev->dev, "Buffer is too small\n"); |
| ret = -ENOMEM; |
| goto unref_cursor; |
| } |
| |
| gt = container_of(obj, struct gtt_range, gem); |
| |
| /* Pin the memory into the GTT */ |
| ret = psb_gtt_pin(gt); |
| if (ret) { |
| dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle); |
| goto unref_cursor; |
| } |
| |
| if (dev_priv->ops->cursor_needs_phys) { |
| if (cursor_gt == NULL) { |
| dev_err(dev->dev, "No hardware cursor mem available"); |
| ret = -ENOMEM; |
| goto unref_cursor; |
| } |
| |
| /* Prevent overflow */ |
| if (gt->npage > 4) |
| cursor_pages = 4; |
| else |
| cursor_pages = gt->npage; |
| |
| /* Copy the cursor to cursor mem */ |
| tmp_dst = dev_priv->vram_addr + cursor_gt->offset; |
| for (i = 0; i < cursor_pages; i++) { |
| tmp_src = kmap(gt->pages[i]); |
| memcpy(tmp_dst, tmp_src, PAGE_SIZE); |
| kunmap(gt->pages[i]); |
| tmp_dst += PAGE_SIZE; |
| } |
| |
| addr = gma_crtc->cursor_addr; |
| } else { |
| addr = gt->offset; |
| gma_crtc->cursor_addr = addr; |
| } |
| |
| temp = 0; |
| /* set the pipe for the cursor */ |
| temp |= (pipe << 28); |
| temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; |
| |
| if (gma_power_begin(dev, false)) { |
| REG_WRITE(control, temp); |
| REG_WRITE(base, addr); |
| gma_power_end(dev); |
| } |
| |
| /* unpin the old bo */ |
| if (gma_crtc->cursor_obj) { |
| gt = container_of(gma_crtc->cursor_obj, struct gtt_range, gem); |
| psb_gtt_unpin(gt); |
| drm_gem_object_unreference_unlocked(gma_crtc->cursor_obj); |
| } |
| |
| gma_crtc->cursor_obj = obj; |
| unlock: |
| return ret; |
| |
| unref_cursor: |
| drm_gem_object_unreference_unlocked(obj); |
| return ret; |
| } |
| |
| int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct gma_crtc *gma_crtc = to_gma_crtc(crtc); |
| int pipe = gma_crtc->pipe; |
| uint32_t temp = 0; |
| uint32_t addr; |
| |
| if (x < 0) { |
| temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT); |
| x = -x; |
| } |
| if (y < 0) { |
| temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT); |
| y = -y; |
| } |
| |
| temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT); |
| temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT); |
| |
| addr = gma_crtc->cursor_addr; |
| |
| if (gma_power_begin(dev, false)) { |
| REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp); |
| REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr); |
| gma_power_end(dev); |
| } |
| return 0; |
| } |
| |
| void gma_crtc_prepare(struct drm_crtc *crtc) |
| { |
| const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; |
| crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); |
| } |
| |
| void gma_crtc_commit(struct drm_crtc *crtc) |
| { |
| const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; |
| crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); |
| } |
| |
| void gma_crtc_disable(struct drm_crtc *crtc) |
| { |
| struct gtt_range *gt; |
| const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; |
| |
| crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); |
| |
| if (crtc->primary->fb) { |
| gt = to_psb_fb(crtc->primary->fb)->gtt; |
| psb_gtt_unpin(gt); |
| } |
| } |
| |
| void gma_crtc_destroy(struct drm_crtc *crtc) |
| { |
| struct gma_crtc *gma_crtc = to_gma_crtc(crtc); |
| |
| kfree(gma_crtc->crtc_state); |
| drm_crtc_cleanup(crtc); |
| kfree(gma_crtc); |
| } |
| |
| int gma_crtc_set_config(struct drm_mode_set *set) |
| { |
| struct drm_device *dev = set->crtc->dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| if (!dev_priv->rpm_enabled) |
| return drm_crtc_helper_set_config(set); |
| |
| pm_runtime_forbid(&dev->pdev->dev); |
| ret = drm_crtc_helper_set_config(set); |
| pm_runtime_allow(&dev->pdev->dev); |
| |
| return ret; |
| } |
| |
| /** |
| * Save HW states of given crtc |
| */ |
| void gma_crtc_save(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct gma_crtc *gma_crtc = to_gma_crtc(crtc); |
| struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state; |
| const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; |
| uint32_t palette_reg; |
| int i; |
| |
| if (!crtc_state) { |
| dev_err(dev->dev, "No CRTC state found\n"); |
| return; |
| } |
| |
| crtc_state->saveDSPCNTR = REG_READ(map->cntr); |
| crtc_state->savePIPECONF = REG_READ(map->conf); |
| crtc_state->savePIPESRC = REG_READ(map->src); |
| crtc_state->saveFP0 = REG_READ(map->fp0); |
| crtc_state->saveFP1 = REG_READ(map->fp1); |
| crtc_state->saveDPLL = REG_READ(map->dpll); |
| crtc_state->saveHTOTAL = REG_READ(map->htotal); |
| crtc_state->saveHBLANK = REG_READ(map->hblank); |
| crtc_state->saveHSYNC = REG_READ(map->hsync); |
| crtc_state->saveVTOTAL = REG_READ(map->vtotal); |
| crtc_state->saveVBLANK = REG_READ(map->vblank); |
| crtc_state->saveVSYNC = REG_READ(map->vsync); |
| crtc_state->saveDSPSTRIDE = REG_READ(map->stride); |
| |
| /* NOTE: DSPSIZE DSPPOS only for psb */ |
| crtc_state->saveDSPSIZE = REG_READ(map->size); |
| crtc_state->saveDSPPOS = REG_READ(map->pos); |
| |
| crtc_state->saveDSPBASE = REG_READ(map->base); |
| |
| palette_reg = map->palette; |
| for (i = 0; i < 256; ++i) |
| crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2)); |
| } |
| |
| /** |
| * Restore HW states of given crtc |
| */ |
| void gma_crtc_restore(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_psb_private *dev_priv = dev->dev_private; |
| struct gma_crtc *gma_crtc = to_gma_crtc(crtc); |
| struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state; |
| const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe]; |
| uint32_t palette_reg; |
| int i; |
| |
| if (!crtc_state) { |
| dev_err(dev->dev, "No crtc state\n"); |
| return; |
| } |
| |
| if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) { |
| REG_WRITE(map->dpll, |
| crtc_state->saveDPLL & ~DPLL_VCO_ENABLE); |
| REG_READ(map->dpll); |
| udelay(150); |
| } |
| |
| REG_WRITE(map->fp0, crtc_state->saveFP0); |
| REG_READ(map->fp0); |
| |
| REG_WRITE(map->fp1, crtc_state->saveFP1); |
| REG_READ(map->fp1); |
| |
| REG_WRITE(map->dpll, crtc_state->saveDPLL); |
| REG_READ(map->dpll); |
| udelay(150); |
| |
| REG_WRITE(map->htotal, crtc_state->saveHTOTAL); |
| REG_WRITE(map->hblank, crtc_state->saveHBLANK); |
| REG_WRITE(map->hsync, crtc_state->saveHSYNC); |
| REG_WRITE(map->vtotal, crtc_state->saveVTOTAL); |
| REG_WRITE(map->vblank, crtc_state->saveVBLANK); |
| REG_WRITE(map->vsync, crtc_state->saveVSYNC); |
| REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE); |
| |
| REG_WRITE(map->size, crtc_state->saveDSPSIZE); |
| REG_WRITE(map->pos, crtc_state->saveDSPPOS); |
| |
| REG_WRITE(map->src, crtc_state->savePIPESRC); |
| REG_WRITE(map->base, crtc_state->saveDSPBASE); |
| REG_WRITE(map->conf, crtc_state->savePIPECONF); |
| |
| gma_wait_for_vblank(dev); |
| |
| REG_WRITE(map->cntr, crtc_state->saveDSPCNTR); |
| REG_WRITE(map->base, crtc_state->saveDSPBASE); |
| |
| gma_wait_for_vblank(dev); |
| |
| palette_reg = map->palette; |
| for (i = 0; i < 256; ++i) |
| REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]); |
| } |
| |
| void gma_encoder_prepare(struct drm_encoder *encoder) |
| { |
| const struct drm_encoder_helper_funcs *encoder_funcs = |
| encoder->helper_private; |
| /* lvds has its own version of prepare see psb_intel_lvds_prepare */ |
| encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); |
| } |
| |
| void gma_encoder_commit(struct drm_encoder *encoder) |
| { |
| const struct drm_encoder_helper_funcs *encoder_funcs = |
| encoder->helper_private; |
| /* lvds has its own version of commit see psb_intel_lvds_commit */ |
| encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); |
| } |
| |
| void gma_encoder_destroy(struct drm_encoder *encoder) |
| { |
| struct gma_encoder *intel_encoder = to_gma_encoder(encoder); |
| |
| drm_encoder_cleanup(encoder); |
| kfree(intel_encoder); |
| } |
| |
| /* Currently there is only a 1:1 mapping of encoders and connectors */ |
| struct drm_encoder *gma_best_encoder(struct drm_connector *connector) |
| { |
| struct gma_encoder *gma_encoder = gma_attached_encoder(connector); |
| |
| return &gma_encoder->base; |
| } |
| |
| void gma_connector_attach_encoder(struct gma_connector *connector, |
| struct gma_encoder *encoder) |
| { |
| connector->encoder = encoder; |
| drm_mode_connector_attach_encoder(&connector->base, |
| &encoder->base); |
| } |
| |
| #define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; } |
| |
| bool gma_pll_is_valid(struct drm_crtc *crtc, |
| const struct gma_limit_t *limit, |
| struct gma_clock_t *clock) |
| { |
| if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) |
| GMA_PLL_INVALID("p1 out of range"); |
| if (clock->p < limit->p.min || limit->p.max < clock->p) |
| GMA_PLL_INVALID("p out of range"); |
| if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) |
| GMA_PLL_INVALID("m2 out of range"); |
| if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) |
| GMA_PLL_INVALID("m1 out of range"); |
| /* On CDV m1 is always 0 */ |
| if (clock->m1 <= clock->m2 && clock->m1 != 0) |
| GMA_PLL_INVALID("m1 <= m2 && m1 != 0"); |
| if (clock->m < limit->m.min || limit->m.max < clock->m) |
| GMA_PLL_INVALID("m out of range"); |
| if (clock->n < limit->n.min || limit->n.max < clock->n) |
| GMA_PLL_INVALID("n out of range"); |
| if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) |
| GMA_PLL_INVALID("vco out of range"); |
| /* XXX: We may need to be checking "Dot clock" |
| * depending on the multiplier, connector, etc., |
| * rather than just a single range. |
| */ |
| if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) |
| GMA_PLL_INVALID("dot out of range"); |
| |
| return true; |
| } |
| |
| bool gma_find_best_pll(const struct gma_limit_t *limit, |
| struct drm_crtc *crtc, int target, int refclk, |
| struct gma_clock_t *best_clock) |
| { |
| struct drm_device *dev = crtc->dev; |
| const struct gma_clock_funcs *clock_funcs = |
| to_gma_crtc(crtc)->clock_funcs; |
| struct gma_clock_t clock; |
| int err = target; |
| |
| if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && |
| (REG_READ(LVDS) & LVDS_PORT_EN) != 0) { |
| /* |
| * For LVDS, if the panel is on, just rely on its current |
| * settings for dual-channel. We haven't figured out how to |
| * reliably set up different single/dual channel state, if we |
| * even can. |
| */ |
| if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) == |
| LVDS_CLKB_POWER_UP) |
| clock.p2 = limit->p2.p2_fast; |
| else |
| clock.p2 = limit->p2.p2_slow; |
| } else { |
| if (target < limit->p2.dot_limit) |
| clock.p2 = limit->p2.p2_slow; |
| else |
| clock.p2 = limit->p2.p2_fast; |
| } |
| |
| memset(best_clock, 0, sizeof(*best_clock)); |
| |
| /* m1 is always 0 on CDV so the outmost loop will run just once */ |
| for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { |
| for (clock.m2 = limit->m2.min; |
| (clock.m2 < clock.m1 || clock.m1 == 0) && |
| clock.m2 <= limit->m2.max; clock.m2++) { |
| for (clock.n = limit->n.min; |
| clock.n <= limit->n.max; clock.n++) { |
| for (clock.p1 = limit->p1.min; |
| clock.p1 <= limit->p1.max; |
| clock.p1++) { |
| int this_err; |
| |
| clock_funcs->clock(refclk, &clock); |
| |
| if (!clock_funcs->pll_is_valid(crtc, |
| limit, &clock)) |
| continue; |
| |
| this_err = abs(clock.dot - target); |
| if (this_err < err) { |
| *best_clock = clock; |
| err = this_err; |
| } |
| } |
| } |
| } |
| } |
| |
| return err != target; |
| } |