| /* |
| * Copyright © 2008,2010 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| * Chris Wilson <chris@chris-wilson.co.uk> |
| * |
| */ |
| |
| #include <linux/dma_remapping.h> |
| #include <linux/reservation.h> |
| #include <linux/sync_file.h> |
| #include <linux/uaccess.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/i915_drm.h> |
| |
| #include "i915_drv.h" |
| #include "i915_gem_clflush.h" |
| #include "i915_trace.h" |
| #include "intel_drv.h" |
| #include "intel_frontbuffer.h" |
| |
| #define DBG_USE_CPU_RELOC 0 /* -1 force GTT relocs; 1 force CPU relocs */ |
| |
| #define __EXEC_OBJECT_HAS_PIN (1<<31) |
| #define __EXEC_OBJECT_HAS_FENCE (1<<30) |
| #define __EXEC_OBJECT_NEEDS_MAP (1<<29) |
| #define __EXEC_OBJECT_NEEDS_BIAS (1<<28) |
| #define __EXEC_OBJECT_INTERNAL_FLAGS (0xf<<28) /* all of the above */ |
| |
| #define BATCH_OFFSET_BIAS (256*1024) |
| |
| #define __I915_EXEC_ILLEGAL_FLAGS \ |
| (__I915_EXEC_UNKNOWN_FLAGS | I915_EXEC_CONSTANTS_MASK) |
| |
| struct i915_execbuffer { |
| struct drm_i915_private *i915; |
| struct drm_file *file; |
| struct drm_i915_gem_execbuffer2 *args; |
| struct drm_i915_gem_exec_object2 *exec; |
| struct intel_engine_cs *engine; |
| struct i915_gem_context *ctx; |
| struct i915_address_space *vm; |
| struct i915_vma *batch; |
| struct drm_i915_gem_request *request; |
| u32 batch_start_offset; |
| u32 batch_len; |
| unsigned int dispatch_flags; |
| struct drm_i915_gem_exec_object2 shadow_exec_entry; |
| bool need_relocs; |
| struct list_head vmas; |
| struct reloc_cache { |
| struct drm_mm_node node; |
| unsigned long vaddr; |
| unsigned int page; |
| bool use_64bit_reloc : 1; |
| } reloc_cache; |
| int lut_mask; |
| struct hlist_head *buckets; |
| }; |
| |
| /* |
| * As an alternative to creating a hashtable of handle-to-vma for a batch, |
| * we used the last available reserved field in the execobject[] and stash |
| * a link from the execobj to its vma. |
| */ |
| #define __exec_to_vma(ee) (ee)->rsvd2 |
| #define exec_to_vma(ee) u64_to_ptr(struct i915_vma, __exec_to_vma(ee)) |
| |
| static int eb_create(struct i915_execbuffer *eb) |
| { |
| if ((eb->args->flags & I915_EXEC_HANDLE_LUT) == 0) { |
| unsigned int size = 1 + ilog2(eb->args->buffer_count); |
| |
| do { |
| eb->buckets = kzalloc(sizeof(struct hlist_head) << size, |
| GFP_TEMPORARY | |
| __GFP_NORETRY | |
| __GFP_NOWARN); |
| if (eb->buckets) |
| break; |
| } while (--size); |
| |
| if (unlikely(!eb->buckets)) { |
| eb->buckets = kzalloc(sizeof(struct hlist_head), |
| GFP_TEMPORARY); |
| if (unlikely(!eb->buckets)) |
| return -ENOMEM; |
| } |
| |
| eb->lut_mask = size; |
| } else { |
| eb->lut_mask = -eb->args->buffer_count; |
| } |
| |
| return 0; |
| } |
| |
| static inline void |
| __eb_unreserve_vma(struct i915_vma *vma, |
| const struct drm_i915_gem_exec_object2 *entry) |
| { |
| if (unlikely(entry->flags & __EXEC_OBJECT_HAS_FENCE)) |
| i915_vma_unpin_fence(vma); |
| |
| if (entry->flags & __EXEC_OBJECT_HAS_PIN) |
| __i915_vma_unpin(vma); |
| } |
| |
| static void |
| eb_unreserve_vma(struct i915_vma *vma) |
| { |
| struct drm_i915_gem_exec_object2 *entry = vma->exec_entry; |
| |
| __eb_unreserve_vma(vma, entry); |
| entry->flags &= ~(__EXEC_OBJECT_HAS_FENCE | __EXEC_OBJECT_HAS_PIN); |
| } |
| |
| static void |
| eb_reset(struct i915_execbuffer *eb) |
| { |
| struct i915_vma *vma; |
| |
| list_for_each_entry(vma, &eb->vmas, exec_link) { |
| eb_unreserve_vma(vma); |
| i915_vma_put(vma); |
| vma->exec_entry = NULL; |
| } |
| |
| if (eb->lut_mask >= 0) |
| memset(eb->buckets, 0, |
| sizeof(struct hlist_head) << eb->lut_mask); |
| } |
| |
| static bool |
| eb_add_vma(struct i915_execbuffer *eb, struct i915_vma *vma, int i) |
| { |
| if (unlikely(vma->exec_entry)) { |
| DRM_DEBUG("Object [handle %d, index %d] appears more than once in object list\n", |
| eb->exec[i].handle, i); |
| return false; |
| } |
| list_add_tail(&vma->exec_link, &eb->vmas); |
| |
| vma->exec_entry = &eb->exec[i]; |
| if (eb->lut_mask >= 0) { |
| vma->exec_handle = eb->exec[i].handle; |
| hlist_add_head(&vma->exec_node, |
| &eb->buckets[hash_32(vma->exec_handle, |
| eb->lut_mask)]); |
| } |
| |
| i915_vma_get(vma); |
| __exec_to_vma(&eb->exec[i]) = (uintptr_t)vma; |
| return true; |
| } |
| |
| static inline struct hlist_head * |
| ht_head(const struct i915_gem_context *ctx, u32 handle) |
| { |
| return &ctx->vma_lut.ht[hash_32(handle, ctx->vma_lut.ht_bits)]; |
| } |
| |
| static inline bool |
| ht_needs_resize(const struct i915_gem_context *ctx) |
| { |
| return (4*ctx->vma_lut.ht_count > 3*ctx->vma_lut.ht_size || |
| 4*ctx->vma_lut.ht_count + 1 < ctx->vma_lut.ht_size); |
| } |
| |
| static int |
| eb_lookup_vmas(struct i915_execbuffer *eb) |
| { |
| #define INTERMEDIATE BIT(0) |
| const int count = eb->args->buffer_count; |
| struct i915_vma *vma; |
| int slow_pass = -1; |
| int i; |
| |
| INIT_LIST_HEAD(&eb->vmas); |
| |
| if (unlikely(eb->ctx->vma_lut.ht_size & I915_CTX_RESIZE_IN_PROGRESS)) |
| flush_work(&eb->ctx->vma_lut.resize); |
| GEM_BUG_ON(eb->ctx->vma_lut.ht_size & I915_CTX_RESIZE_IN_PROGRESS); |
| |
| for (i = 0; i < count; i++) { |
| __exec_to_vma(&eb->exec[i]) = 0; |
| |
| hlist_for_each_entry(vma, |
| ht_head(eb->ctx, eb->exec[i].handle), |
| ctx_node) { |
| if (vma->ctx_handle != eb->exec[i].handle) |
| continue; |
| |
| if (!eb_add_vma(eb, vma, i)) |
| return -EINVAL; |
| |
| goto next_vma; |
| } |
| |
| if (slow_pass < 0) |
| slow_pass = i; |
| next_vma: ; |
| } |
| |
| if (slow_pass < 0) |
| return 0; |
| |
| spin_lock(&eb->file->table_lock); |
| /* Grab a reference to the object and release the lock so we can lookup |
| * or create the VMA without using GFP_ATOMIC */ |
| for (i = slow_pass; i < count; i++) { |
| struct drm_i915_gem_object *obj; |
| |
| if (__exec_to_vma(&eb->exec[i])) |
| continue; |
| |
| obj = to_intel_bo(idr_find(&eb->file->object_idr, |
| eb->exec[i].handle)); |
| if (unlikely(!obj)) { |
| spin_unlock(&eb->file->table_lock); |
| DRM_DEBUG("Invalid object handle %d at index %d\n", |
| eb->exec[i].handle, i); |
| return -ENOENT; |
| } |
| |
| __exec_to_vma(&eb->exec[i]) = INTERMEDIATE | (uintptr_t)obj; |
| } |
| spin_unlock(&eb->file->table_lock); |
| |
| for (i = slow_pass; i < count; i++) { |
| struct drm_i915_gem_object *obj; |
| |
| if ((__exec_to_vma(&eb->exec[i]) & INTERMEDIATE) == 0) |
| continue; |
| |
| /* |
| * NOTE: We can leak any vmas created here when something fails |
| * later on. But that's no issue since vma_unbind can deal with |
| * vmas which are not actually bound. And since only |
| * lookup_or_create exists as an interface to get at the vma |
| * from the (obj, vm) we don't run the risk of creating |
| * duplicated vmas for the same vm. |
| */ |
| obj = u64_to_ptr(struct drm_i915_gem_object, |
| __exec_to_vma(&eb->exec[i]) & ~INTERMEDIATE); |
| vma = i915_vma_instance(obj, eb->vm, NULL); |
| if (unlikely(IS_ERR(vma))) { |
| DRM_DEBUG("Failed to lookup VMA\n"); |
| return PTR_ERR(vma); |
| } |
| |
| /* First come, first served */ |
| if (!vma->ctx) { |
| vma->ctx = eb->ctx; |
| vma->ctx_handle = eb->exec[i].handle; |
| hlist_add_head(&vma->ctx_node, |
| ht_head(eb->ctx, eb->exec[i].handle)); |
| eb->ctx->vma_lut.ht_count++; |
| if (i915_vma_is_ggtt(vma)) { |
| GEM_BUG_ON(obj->vma_hashed); |
| obj->vma_hashed = vma; |
| } |
| } |
| |
| if (!eb_add_vma(eb, vma, i)) |
| return -EINVAL; |
| } |
| |
| if (ht_needs_resize(eb->ctx)) { |
| eb->ctx->vma_lut.ht_size |= I915_CTX_RESIZE_IN_PROGRESS; |
| queue_work(system_highpri_wq, &eb->ctx->vma_lut.resize); |
| } |
| |
| return 0; |
| #undef INTERMEDIATE |
| } |
| |
| static struct i915_vma * |
| eb_get_batch(struct i915_execbuffer *eb) |
| { |
| struct i915_vma *vma = |
| exec_to_vma(&eb->exec[eb->args->buffer_count - 1]); |
| |
| /* |
| * SNA is doing fancy tricks with compressing batch buffers, which leads |
| * to negative relocation deltas. Usually that works out ok since the |
| * relocate address is still positive, except when the batch is placed |
| * very low in the GTT. Ensure this doesn't happen. |
| * |
| * Note that actual hangs have only been observed on gen7, but for |
| * paranoia do it everywhere. |
| */ |
| if ((vma->exec_entry->flags & EXEC_OBJECT_PINNED) == 0) |
| vma->exec_entry->flags |= __EXEC_OBJECT_NEEDS_BIAS; |
| |
| return vma; |
| } |
| |
| static struct i915_vma * |
| eb_get_vma(struct i915_execbuffer *eb, unsigned long handle) |
| { |
| if (eb->lut_mask < 0) { |
| if (handle >= -eb->lut_mask) |
| return NULL; |
| return exec_to_vma(&eb->exec[handle]); |
| } else { |
| struct hlist_head *head; |
| struct i915_vma *vma; |
| |
| head = &eb->buckets[hash_32(handle, eb->lut_mask)]; |
| hlist_for_each_entry(vma, head, exec_node) { |
| if (vma->exec_handle == handle) |
| return vma; |
| } |
| return NULL; |
| } |
| } |
| |
| static void eb_destroy(struct i915_execbuffer *eb) |
| { |
| struct i915_vma *vma; |
| |
| list_for_each_entry(vma, &eb->vmas, exec_link) { |
| if (!vma->exec_entry) |
| continue; |
| |
| __eb_unreserve_vma(vma, vma->exec_entry); |
| vma->exec_entry = NULL; |
| i915_vma_put(vma); |
| } |
| |
| i915_gem_context_put(eb->ctx); |
| |
| if (eb->lut_mask >= 0) |
| kfree(eb->buckets); |
| } |
| |
| static inline int use_cpu_reloc(struct drm_i915_gem_object *obj) |
| { |
| if (!i915_gem_object_has_struct_page(obj)) |
| return false; |
| |
| if (DBG_USE_CPU_RELOC) |
| return DBG_USE_CPU_RELOC > 0; |
| |
| return (HAS_LLC(to_i915(obj->base.dev)) || |
| obj->cache_dirty || |
| obj->cache_level != I915_CACHE_NONE); |
| } |
| |
| /* Used to convert any address to canonical form. |
| * Starting from gen8, some commands (e.g. STATE_BASE_ADDRESS, |
| * MI_LOAD_REGISTER_MEM and others, see Broadwell PRM Vol2a) require the |
| * addresses to be in a canonical form: |
| * "GraphicsAddress[63:48] are ignored by the HW and assumed to be in correct |
| * canonical form [63:48] == [47]." |
| */ |
| #define GEN8_HIGH_ADDRESS_BIT 47 |
| static inline uint64_t gen8_canonical_addr(uint64_t address) |
| { |
| return sign_extend64(address, GEN8_HIGH_ADDRESS_BIT); |
| } |
| |
| static inline uint64_t gen8_noncanonical_addr(uint64_t address) |
| { |
| return address & ((1ULL << (GEN8_HIGH_ADDRESS_BIT + 1)) - 1); |
| } |
| |
| static inline uint64_t |
| relocation_target(const struct drm_i915_gem_relocation_entry *reloc, |
| uint64_t target_offset) |
| { |
| return gen8_canonical_addr((int)reloc->delta + target_offset); |
| } |
| |
| static void reloc_cache_init(struct reloc_cache *cache, |
| struct drm_i915_private *i915) |
| { |
| cache->page = -1; |
| cache->vaddr = 0; |
| /* Must be a variable in the struct to allow GCC to unroll. */ |
| cache->use_64bit_reloc = HAS_64BIT_RELOC(i915); |
| cache->node.allocated = false; |
| } |
| |
| static inline void *unmask_page(unsigned long p) |
| { |
| return (void *)(uintptr_t)(p & PAGE_MASK); |
| } |
| |
| static inline unsigned int unmask_flags(unsigned long p) |
| { |
| return p & ~PAGE_MASK; |
| } |
| |
| #define KMAP 0x4 /* after CLFLUSH_FLAGS */ |
| |
| static inline struct i915_ggtt *cache_to_ggtt(struct reloc_cache *cache) |
| { |
| struct drm_i915_private *i915 = |
| container_of(cache, struct i915_execbuffer, reloc_cache)->i915; |
| return &i915->ggtt; |
| } |
| |
| static void reloc_cache_reset(struct reloc_cache *cache) |
| { |
| void *vaddr; |
| |
| if (!cache->vaddr) |
| return; |
| |
| vaddr = unmask_page(cache->vaddr); |
| if (cache->vaddr & KMAP) { |
| if (cache->vaddr & CLFLUSH_AFTER) |
| mb(); |
| |
| kunmap_atomic(vaddr); |
| i915_gem_obj_finish_shmem_access((struct drm_i915_gem_object *)cache->node.mm); |
| } else { |
| wmb(); |
| io_mapping_unmap_atomic((void __iomem *)vaddr); |
| if (cache->node.allocated) { |
| struct i915_ggtt *ggtt = cache_to_ggtt(cache); |
| |
| ggtt->base.clear_range(&ggtt->base, |
| cache->node.start, |
| cache->node.size); |
| drm_mm_remove_node(&cache->node); |
| } else { |
| i915_vma_unpin((struct i915_vma *)cache->node.mm); |
| } |
| } |
| |
| cache->vaddr = 0; |
| cache->page = -1; |
| } |
| |
| static void *reloc_kmap(struct drm_i915_gem_object *obj, |
| struct reloc_cache *cache, |
| int page) |
| { |
| void *vaddr; |
| |
| if (cache->vaddr) { |
| kunmap_atomic(unmask_page(cache->vaddr)); |
| } else { |
| unsigned int flushes; |
| int ret; |
| |
| ret = i915_gem_obj_prepare_shmem_write(obj, &flushes); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| BUILD_BUG_ON(KMAP & CLFLUSH_FLAGS); |
| BUILD_BUG_ON((KMAP | CLFLUSH_FLAGS) & PAGE_MASK); |
| |
| cache->vaddr = flushes | KMAP; |
| cache->node.mm = (void *)obj; |
| if (flushes) |
| mb(); |
| } |
| |
| vaddr = kmap_atomic(i915_gem_object_get_dirty_page(obj, page)); |
| cache->vaddr = unmask_flags(cache->vaddr) | (unsigned long)vaddr; |
| cache->page = page; |
| |
| return vaddr; |
| } |
| |
| static void *reloc_iomap(struct drm_i915_gem_object *obj, |
| struct reloc_cache *cache, |
| int page) |
| { |
| struct i915_ggtt *ggtt = cache_to_ggtt(cache); |
| unsigned long offset; |
| void *vaddr; |
| |
| if (cache->vaddr) { |
| io_mapping_unmap_atomic((void __force __iomem *) unmask_page(cache->vaddr)); |
| } else { |
| struct i915_vma *vma; |
| int ret; |
| |
| if (use_cpu_reloc(obj)) |
| return NULL; |
| |
| ret = i915_gem_object_set_to_gtt_domain(obj, true); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| vma = i915_gem_object_ggtt_pin(obj, NULL, 0, 0, |
| PIN_MAPPABLE | PIN_NONBLOCK); |
| if (IS_ERR(vma)) { |
| memset(&cache->node, 0, sizeof(cache->node)); |
| ret = drm_mm_insert_node_in_range |
| (&ggtt->base.mm, &cache->node, |
| PAGE_SIZE, 0, I915_COLOR_UNEVICTABLE, |
| 0, ggtt->mappable_end, |
| DRM_MM_INSERT_LOW); |
| if (ret) /* no inactive aperture space, use cpu reloc */ |
| return NULL; |
| } else { |
| ret = i915_vma_put_fence(vma); |
| if (ret) { |
| i915_vma_unpin(vma); |
| return ERR_PTR(ret); |
| } |
| |
| cache->node.start = vma->node.start; |
| cache->node.mm = (void *)vma; |
| } |
| } |
| |
| offset = cache->node.start; |
| if (cache->node.allocated) { |
| wmb(); |
| ggtt->base.insert_page(&ggtt->base, |
| i915_gem_object_get_dma_address(obj, page), |
| offset, I915_CACHE_NONE, 0); |
| } else { |
| offset += page << PAGE_SHIFT; |
| } |
| |
| vaddr = (void __force *)io_mapping_map_atomic_wc(&ggtt->mappable, |
| offset); |
| cache->page = page; |
| cache->vaddr = (unsigned long)vaddr; |
| |
| return vaddr; |
| } |
| |
| static void *reloc_vaddr(struct drm_i915_gem_object *obj, |
| struct reloc_cache *cache, |
| int page) |
| { |
| void *vaddr; |
| |
| if (cache->page == page) { |
| vaddr = unmask_page(cache->vaddr); |
| } else { |
| vaddr = NULL; |
| if ((cache->vaddr & KMAP) == 0) |
| vaddr = reloc_iomap(obj, cache, page); |
| if (!vaddr) |
| vaddr = reloc_kmap(obj, cache, page); |
| } |
| |
| return vaddr; |
| } |
| |
| static void clflush_write32(u32 *addr, u32 value, unsigned int flushes) |
| { |
| if (unlikely(flushes & (CLFLUSH_BEFORE | CLFLUSH_AFTER))) { |
| if (flushes & CLFLUSH_BEFORE) { |
| clflushopt(addr); |
| mb(); |
| } |
| |
| *addr = value; |
| |
| /* Writes to the same cacheline are serialised by the CPU |
| * (including clflush). On the write path, we only require |
| * that it hits memory in an orderly fashion and place |
| * mb barriers at the start and end of the relocation phase |
| * to ensure ordering of clflush wrt to the system. |
| */ |
| if (flushes & CLFLUSH_AFTER) |
| clflushopt(addr); |
| } else |
| *addr = value; |
| } |
| |
| static int |
| relocate_entry(struct drm_i915_gem_object *obj, |
| const struct drm_i915_gem_relocation_entry *reloc, |
| struct reloc_cache *cache, |
| u64 target_offset) |
| { |
| u64 offset = reloc->offset; |
| bool wide = cache->use_64bit_reloc; |
| void *vaddr; |
| |
| target_offset = relocation_target(reloc, target_offset); |
| repeat: |
| vaddr = reloc_vaddr(obj, cache, offset >> PAGE_SHIFT); |
| if (IS_ERR(vaddr)) |
| return PTR_ERR(vaddr); |
| |
| clflush_write32(vaddr + offset_in_page(offset), |
| lower_32_bits(target_offset), |
| cache->vaddr); |
| |
| if (wide) { |
| offset += sizeof(u32); |
| target_offset >>= 32; |
| wide = false; |
| goto repeat; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| eb_relocate_entry(struct i915_vma *vma, |
| struct i915_execbuffer *eb, |
| struct drm_i915_gem_relocation_entry *reloc) |
| { |
| struct i915_vma *target; |
| u64 target_offset; |
| int ret; |
| |
| /* we've already hold a reference to all valid objects */ |
| target = eb_get_vma(eb, reloc->target_handle); |
| if (unlikely(!target)) |
| return -ENOENT; |
| |
| /* Validate that the target is in a valid r/w GPU domain */ |
| if (unlikely(reloc->write_domain & (reloc->write_domain - 1))) { |
| DRM_DEBUG("reloc with multiple write domains: " |
| "target %d offset %d " |
| "read %08x write %08x", |
| reloc->target_handle, |
| (int) reloc->offset, |
| reloc->read_domains, |
| reloc->write_domain); |
| return -EINVAL; |
| } |
| if (unlikely((reloc->write_domain | reloc->read_domains) |
| & ~I915_GEM_GPU_DOMAINS)) { |
| DRM_DEBUG("reloc with read/write non-GPU domains: " |
| "target %d offset %d " |
| "read %08x write %08x", |
| reloc->target_handle, |
| (int) reloc->offset, |
| reloc->read_domains, |
| reloc->write_domain); |
| return -EINVAL; |
| } |
| |
| if (reloc->write_domain) |
| target->exec_entry->flags |= EXEC_OBJECT_WRITE; |
| |
| /* |
| * Sandybridge PPGTT errata: We need a global gtt mapping for MI and |
| * pipe_control writes because the gpu doesn't properly redirect them |
| * through the ppgtt for non_secure batchbuffers. |
| */ |
| if (unlikely(IS_GEN6(eb->i915) && |
| reloc->write_domain == I915_GEM_DOMAIN_INSTRUCTION)) { |
| ret = i915_vma_bind(target, target->obj->cache_level, |
| PIN_GLOBAL); |
| if (WARN_ONCE(ret, "Unexpected failure to bind target VMA!")) |
| return ret; |
| } |
| |
| /* If the relocation already has the right value in it, no |
| * more work needs to be done. |
| */ |
| target_offset = gen8_canonical_addr(target->node.start); |
| if (target_offset == reloc->presumed_offset) |
| return 0; |
| |
| /* Check that the relocation address is valid... */ |
| if (unlikely(reloc->offset > |
| vma->size - (eb->reloc_cache.use_64bit_reloc ? 8 : 4))) { |
| DRM_DEBUG("Relocation beyond object bounds: " |
| "target %d offset %d size %d.\n", |
| reloc->target_handle, |
| (int)reloc->offset, |
| (int)vma->size); |
| return -EINVAL; |
| } |
| if (unlikely(reloc->offset & 3)) { |
| DRM_DEBUG("Relocation not 4-byte aligned: " |
| "target %d offset %d.\n", |
| reloc->target_handle, |
| (int)reloc->offset); |
| return -EINVAL; |
| } |
| |
| ret = relocate_entry(vma->obj, reloc, &eb->reloc_cache, target_offset); |
| if (ret) |
| return ret; |
| |
| /* and update the user's relocation entry */ |
| reloc->presumed_offset = target_offset; |
| return 0; |
| } |
| |
| static int eb_relocate_vma(struct i915_vma *vma, struct i915_execbuffer *eb) |
| { |
| #define N_RELOC(x) ((x) / sizeof(struct drm_i915_gem_relocation_entry)) |
| struct drm_i915_gem_relocation_entry stack_reloc[N_RELOC(512)]; |
| struct drm_i915_gem_relocation_entry __user *user_relocs; |
| struct drm_i915_gem_exec_object2 *entry = vma->exec_entry; |
| int remain, ret = 0; |
| |
| user_relocs = u64_to_user_ptr(entry->relocs_ptr); |
| |
| remain = entry->relocation_count; |
| while (remain) { |
| struct drm_i915_gem_relocation_entry *r = stack_reloc; |
| unsigned long unwritten; |
| unsigned int count; |
| |
| count = min_t(unsigned int, remain, ARRAY_SIZE(stack_reloc)); |
| remain -= count; |
| |
| /* This is the fast path and we cannot handle a pagefault |
| * whilst holding the struct mutex lest the user pass in the |
| * relocations contained within a mmaped bo. For in such a case |
| * we, the page fault handler would call i915_gem_fault() and |
| * we would try to acquire the struct mutex again. Obviously |
| * this is bad and so lockdep complains vehemently. |
| */ |
| pagefault_disable(); |
| unwritten = __copy_from_user_inatomic(r, user_relocs, count*sizeof(r[0])); |
| pagefault_enable(); |
| if (unlikely(unwritten)) { |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| do { |
| u64 offset = r->presumed_offset; |
| |
| ret = eb_relocate_entry(vma, eb, r); |
| if (ret) |
| goto out; |
| |
| if (r->presumed_offset != offset) { |
| pagefault_disable(); |
| unwritten = __put_user(r->presumed_offset, |
| &user_relocs->presumed_offset); |
| pagefault_enable(); |
| if (unlikely(unwritten)) { |
| /* Note that reporting an error now |
| * leaves everything in an inconsistent |
| * state as we have *already* changed |
| * the relocation value inside the |
| * object. As we have not changed the |
| * reloc.presumed_offset or will not |
| * change the execobject.offset, on the |
| * call we may not rewrite the value |
| * inside the object, leaving it |
| * dangling and causing a GPU hang. |
| */ |
| ret = -EFAULT; |
| goto out; |
| } |
| } |
| |
| user_relocs++; |
| r++; |
| } while (--count); |
| } |
| |
| out: |
| reloc_cache_reset(&eb->reloc_cache); |
| return ret; |
| #undef N_RELOC |
| } |
| |
| static int |
| eb_relocate_vma_slow(struct i915_vma *vma, |
| struct i915_execbuffer *eb, |
| struct drm_i915_gem_relocation_entry *relocs) |
| { |
| const struct drm_i915_gem_exec_object2 *entry = vma->exec_entry; |
| int i, ret = 0; |
| |
| for (i = 0; i < entry->relocation_count; i++) { |
| ret = eb_relocate_entry(vma, eb, &relocs[i]); |
| if (ret) |
| break; |
| } |
| reloc_cache_reset(&eb->reloc_cache); |
| return ret; |
| } |
| |
| static int eb_relocate(struct i915_execbuffer *eb) |
| { |
| struct i915_vma *vma; |
| int ret = 0; |
| |
| list_for_each_entry(vma, &eb->vmas, exec_link) { |
| ret = eb_relocate_vma(vma, eb); |
| if (ret) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static bool only_mappable_for_reloc(unsigned int flags) |
| { |
| return (flags & (EXEC_OBJECT_NEEDS_FENCE | __EXEC_OBJECT_NEEDS_MAP)) == |
| __EXEC_OBJECT_NEEDS_MAP; |
| } |
| |
| static int |
| eb_reserve_vma(struct i915_vma *vma, |
| struct intel_engine_cs *engine, |
| bool *need_reloc) |
| { |
| struct drm_i915_gem_exec_object2 *entry = vma->exec_entry; |
| uint64_t flags; |
| int ret; |
| |
| flags = PIN_USER; |
| if (entry->flags & EXEC_OBJECT_NEEDS_GTT) |
| flags |= PIN_GLOBAL; |
| |
| if (!drm_mm_node_allocated(&vma->node)) { |
| /* Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset, |
| * limit address to the first 4GBs for unflagged objects. |
| */ |
| if ((entry->flags & EXEC_OBJECT_SUPPORTS_48B_ADDRESS) == 0) |
| flags |= PIN_ZONE_4G; |
| if (entry->flags & __EXEC_OBJECT_NEEDS_MAP) |
| flags |= PIN_GLOBAL | PIN_MAPPABLE; |
| if (entry->flags & __EXEC_OBJECT_NEEDS_BIAS) |
| flags |= BATCH_OFFSET_BIAS | PIN_OFFSET_BIAS; |
| if (entry->flags & EXEC_OBJECT_PINNED) |
| flags |= entry->offset | PIN_OFFSET_FIXED; |
| if ((flags & PIN_MAPPABLE) == 0) |
| flags |= PIN_HIGH; |
| } |
| |
| ret = i915_vma_pin(vma, |
| entry->pad_to_size, |
| entry->alignment, |
| flags); |
| if ((ret == -ENOSPC || ret == -E2BIG) && |
| only_mappable_for_reloc(entry->flags)) |
| ret = i915_vma_pin(vma, |
| entry->pad_to_size, |
| entry->alignment, |
| flags & ~PIN_MAPPABLE); |
| if (ret) |
| return ret; |
| |
| entry->flags |= __EXEC_OBJECT_HAS_PIN; |
| |
| if (entry->flags & EXEC_OBJECT_NEEDS_FENCE) { |
| ret = i915_vma_get_fence(vma); |
| if (ret) |
| return ret; |
| |
| if (i915_vma_pin_fence(vma)) |
| entry->flags |= __EXEC_OBJECT_HAS_FENCE; |
| } |
| |
| if (entry->offset != vma->node.start) { |
| entry->offset = vma->node.start; |
| *need_reloc = true; |
| } |
| |
| return 0; |
| } |
| |
| static bool |
| need_reloc_mappable(struct i915_vma *vma) |
| { |
| struct drm_i915_gem_exec_object2 *entry = vma->exec_entry; |
| |
| if (entry->relocation_count == 0) |
| return false; |
| |
| if (!i915_vma_is_ggtt(vma)) |
| return false; |
| |
| /* See also use_cpu_reloc() */ |
| if (HAS_LLC(to_i915(vma->obj->base.dev))) |
| return false; |
| |
| if (vma->obj->base.write_domain == I915_GEM_DOMAIN_CPU) |
| return false; |
| |
| return true; |
| } |
| |
| static bool |
| eb_vma_misplaced(struct i915_vma *vma) |
| { |
| struct drm_i915_gem_exec_object2 *entry = vma->exec_entry; |
| |
| WARN_ON(entry->flags & __EXEC_OBJECT_NEEDS_MAP && |
| !i915_vma_is_ggtt(vma)); |
| |
| if (entry->alignment && !IS_ALIGNED(vma->node.start, entry->alignment)) |
| return true; |
| |
| if (vma->node.size < entry->pad_to_size) |
| return true; |
| |
| if (entry->flags & EXEC_OBJECT_PINNED && |
| vma->node.start != entry->offset) |
| return true; |
| |
| if (entry->flags & __EXEC_OBJECT_NEEDS_BIAS && |
| vma->node.start < BATCH_OFFSET_BIAS) |
| return true; |
| |
| /* avoid costly ping-pong once a batch bo ended up non-mappable */ |
| if (entry->flags & __EXEC_OBJECT_NEEDS_MAP && |
| !i915_vma_is_map_and_fenceable(vma)) |
| return !only_mappable_for_reloc(entry->flags); |
| |
| if ((entry->flags & EXEC_OBJECT_SUPPORTS_48B_ADDRESS) == 0 && |
| (vma->node.start + vma->node.size - 1) >> 32) |
| return true; |
| |
| return false; |
| } |
| |
| static int eb_reserve(struct i915_execbuffer *eb) |
| { |
| const bool has_fenced_gpu_access = INTEL_GEN(eb->i915) < 4; |
| const bool needs_unfenced_map = INTEL_INFO(eb->i915)->unfenced_needs_alignment; |
| struct i915_vma *vma; |
| struct list_head ordered_vmas; |
| struct list_head pinned_vmas; |
| int retry; |
| |
| INIT_LIST_HEAD(&ordered_vmas); |
| INIT_LIST_HEAD(&pinned_vmas); |
| while (!list_empty(&eb->vmas)) { |
| struct drm_i915_gem_exec_object2 *entry; |
| bool need_fence, need_mappable; |
| |
| vma = list_first_entry(&eb->vmas, struct i915_vma, exec_link); |
| entry = vma->exec_entry; |
| |
| if (eb->ctx->flags & CONTEXT_NO_ZEROMAP) |
| entry->flags |= __EXEC_OBJECT_NEEDS_BIAS; |
| |
| if (!has_fenced_gpu_access) |
| entry->flags &= ~EXEC_OBJECT_NEEDS_FENCE; |
| need_fence = |
| (entry->flags & EXEC_OBJECT_NEEDS_FENCE || |
| needs_unfenced_map) && |
| i915_gem_object_is_tiled(vma->obj); |
| need_mappable = need_fence || need_reloc_mappable(vma); |
| |
| if (entry->flags & EXEC_OBJECT_PINNED) |
| list_move_tail(&vma->exec_link, &pinned_vmas); |
| else if (need_mappable) { |
| entry->flags |= __EXEC_OBJECT_NEEDS_MAP; |
| list_move(&vma->exec_link, &ordered_vmas); |
| } else |
| list_move_tail(&vma->exec_link, &ordered_vmas); |
| } |
| list_splice(&ordered_vmas, &eb->vmas); |
| list_splice(&pinned_vmas, &eb->vmas); |
| |
| /* Attempt to pin all of the buffers into the GTT. |
| * This is done in 3 phases: |
| * |
| * 1a. Unbind all objects that do not match the GTT constraints for |
| * the execbuffer (fenceable, mappable, alignment etc). |
| * 1b. Increment pin count for already bound objects. |
| * 2. Bind new objects. |
| * 3. Decrement pin count. |
| * |
| * This avoid unnecessary unbinding of later objects in order to make |
| * room for the earlier objects *unless* we need to defragment. |
| */ |
| retry = 0; |
| do { |
| int ret = 0; |
| |
| /* Unbind any ill-fitting objects or pin. */ |
| list_for_each_entry(vma, &eb->vmas, exec_link) { |
| if (!drm_mm_node_allocated(&vma->node)) |
| continue; |
| |
| if (eb_vma_misplaced(vma)) |
| ret = i915_vma_unbind(vma); |
| else |
| ret = eb_reserve_vma(vma, eb->engine, &eb->need_relocs); |
| if (ret) |
| goto err; |
| } |
| |
| /* Bind fresh objects */ |
| list_for_each_entry(vma, &eb->vmas, exec_link) { |
| if (drm_mm_node_allocated(&vma->node)) |
| continue; |
| |
| ret = eb_reserve_vma(vma, eb->engine, &eb->need_relocs); |
| if (ret) |
| goto err; |
| } |
| |
| err: |
| if (ret != -ENOSPC || retry++) |
| return ret; |
| |
| /* Decrement pin count for bound objects */ |
| list_for_each_entry(vma, &eb->vmas, exec_link) |
| eb_unreserve_vma(vma); |
| |
| ret = i915_gem_evict_vm(eb->vm, true); |
| if (ret) |
| return ret; |
| } while (1); |
| } |
| |
| static int |
| eb_relocate_slow(struct i915_execbuffer *eb) |
| { |
| const unsigned int count = eb->args->buffer_count; |
| struct drm_device *dev = &eb->i915->drm; |
| struct drm_i915_gem_relocation_entry *reloc; |
| struct i915_vma *vma; |
| int *reloc_offset; |
| int i, total, ret; |
| |
| /* We may process another execbuffer during the unlock... */ |
| eb_reset(eb); |
| mutex_unlock(&dev->struct_mutex); |
| |
| total = 0; |
| for (i = 0; i < count; i++) |
| total += eb->exec[i].relocation_count; |
| |
| reloc_offset = kvmalloc_array(count, sizeof(*reloc_offset), GFP_KERNEL); |
| reloc = kvmalloc_array(total, sizeof(*reloc), GFP_KERNEL); |
| if (reloc == NULL || reloc_offset == NULL) { |
| kvfree(reloc); |
| kvfree(reloc_offset); |
| mutex_lock(&dev->struct_mutex); |
| return -ENOMEM; |
| } |
| |
| total = 0; |
| for (i = 0; i < count; i++) { |
| struct drm_i915_gem_relocation_entry __user *user_relocs; |
| u64 invalid_offset = (u64)-1; |
| int j; |
| |
| user_relocs = u64_to_user_ptr(eb->exec[i].relocs_ptr); |
| |
| if (copy_from_user(reloc+total, user_relocs, |
| eb->exec[i].relocation_count * sizeof(*reloc))) { |
| ret = -EFAULT; |
| mutex_lock(&dev->struct_mutex); |
| goto err; |
| } |
| |
| /* As we do not update the known relocation offsets after |
| * relocating (due to the complexities in lock handling), |
| * we need to mark them as invalid now so that we force the |
| * relocation processing next time. Just in case the target |
| * object is evicted and then rebound into its old |
| * presumed_offset before the next execbuffer - if that |
| * happened we would make the mistake of assuming that the |
| * relocations were valid. |
| */ |
| for (j = 0; j < eb->exec[i].relocation_count; j++) { |
| if (__copy_to_user(&user_relocs[j].presumed_offset, |
| &invalid_offset, |
| sizeof(invalid_offset))) { |
| ret = -EFAULT; |
| mutex_lock(&dev->struct_mutex); |
| goto err; |
| } |
| } |
| |
| reloc_offset[i] = total; |
| total += eb->exec[i].relocation_count; |
| } |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) { |
| mutex_lock(&dev->struct_mutex); |
| goto err; |
| } |
| |
| /* reacquire the objects */ |
| ret = eb_lookup_vmas(eb); |
| if (ret) |
| goto err; |
| |
| ret = eb_reserve(eb); |
| if (ret) |
| goto err; |
| |
| list_for_each_entry(vma, &eb->vmas, exec_link) { |
| int idx = vma->exec_entry - eb->exec; |
| |
| ret = eb_relocate_vma_slow(vma, eb, reloc + reloc_offset[idx]); |
| if (ret) |
| goto err; |
| } |
| |
| /* Leave the user relocations as are, this is the painfully slow path, |
| * and we want to avoid the complication of dropping the lock whilst |
| * having buffers reserved in the aperture and so causing spurious |
| * ENOSPC for random operations. |
| */ |
| |
| err: |
| kvfree(reloc); |
| kvfree(reloc_offset); |
| return ret; |
| } |
| |
| static int |
| eb_move_to_gpu(struct i915_execbuffer *eb) |
| { |
| struct i915_vma *vma; |
| int ret; |
| |
| list_for_each_entry(vma, &eb->vmas, exec_link) { |
| struct drm_i915_gem_object *obj = vma->obj; |
| |
| if (vma->exec_entry->flags & EXEC_OBJECT_CAPTURE) { |
| struct i915_gem_capture_list *capture; |
| |
| capture = kmalloc(sizeof(*capture), GFP_KERNEL); |
| if (unlikely(!capture)) |
| return -ENOMEM; |
| |
| capture->next = eb->request->capture_list; |
| capture->vma = vma; |
| eb->request->capture_list = capture; |
| } |
| |
| if (vma->exec_entry->flags & EXEC_OBJECT_ASYNC) |
| continue; |
| |
| if (unlikely(obj->cache_dirty && !obj->cache_coherent)) |
| i915_gem_clflush_object(obj, 0); |
| |
| ret = i915_gem_request_await_object |
| (eb->request, obj, vma->exec_entry->flags & EXEC_OBJECT_WRITE); |
| if (ret) |
| return ret; |
| } |
| |
| /* Unconditionally flush any chipset caches (for streaming writes). */ |
| i915_gem_chipset_flush(eb->i915); |
| |
| /* Unconditionally invalidate GPU caches and TLBs. */ |
| return eb->engine->emit_flush(eb->request, EMIT_INVALIDATE); |
| } |
| |
| static bool |
| i915_gem_check_execbuffer(struct drm_i915_gem_execbuffer2 *exec) |
| { |
| if (exec->flags & __I915_EXEC_ILLEGAL_FLAGS) |
| return false; |
| |
| /* Kernel clipping was a DRI1 misfeature */ |
| if (exec->num_cliprects || exec->cliprects_ptr) |
| return false; |
| |
| if (exec->DR4 == 0xffffffff) { |
| DRM_DEBUG("UXA submitting garbage DR4, fixing up\n"); |
| exec->DR4 = 0; |
| } |
| if (exec->DR1 || exec->DR4) |
| return false; |
| |
| if ((exec->batch_start_offset | exec->batch_len) & 0x7) |
| return false; |
| |
| return true; |
| } |
| |
| static int |
| validate_exec_list(struct drm_device *dev, |
| struct drm_i915_gem_exec_object2 *exec, |
| int count) |
| { |
| unsigned relocs_total = 0; |
| unsigned relocs_max = UINT_MAX / sizeof(struct drm_i915_gem_relocation_entry); |
| unsigned invalid_flags; |
| int i; |
| |
| /* INTERNAL flags must not overlap with external ones */ |
| BUILD_BUG_ON(__EXEC_OBJECT_INTERNAL_FLAGS & ~__EXEC_OBJECT_UNKNOWN_FLAGS); |
| |
| invalid_flags = __EXEC_OBJECT_UNKNOWN_FLAGS; |
| if (USES_FULL_PPGTT(dev)) |
| invalid_flags |= EXEC_OBJECT_NEEDS_GTT; |
| |
| for (i = 0; i < count; i++) { |
| char __user *ptr = u64_to_user_ptr(exec[i].relocs_ptr); |
| int length; /* limited by fault_in_pages_readable() */ |
| |
| if (exec[i].flags & invalid_flags) |
| return -EINVAL; |
| |
| /* Offset can be used as input (EXEC_OBJECT_PINNED), reject |
| * any non-page-aligned or non-canonical addresses. |
| */ |
| if (exec[i].flags & EXEC_OBJECT_PINNED) { |
| if (exec[i].offset != |
| gen8_canonical_addr(exec[i].offset & PAGE_MASK)) |
| return -EINVAL; |
| } |
| |
| /* From drm_mm perspective address space is continuous, |
| * so from this point we're always using non-canonical |
| * form internally. |
| */ |
| exec[i].offset = gen8_noncanonical_addr(exec[i].offset); |
| |
| if (exec[i].alignment && !is_power_of_2(exec[i].alignment)) |
| return -EINVAL; |
| |
| /* pad_to_size was once a reserved field, so sanitize it */ |
| if (exec[i].flags & EXEC_OBJECT_PAD_TO_SIZE) { |
| if (offset_in_page(exec[i].pad_to_size)) |
| return -EINVAL; |
| } else { |
| exec[i].pad_to_size = 0; |
| } |
| |
| /* First check for malicious input causing overflow in |
| * the worst case where we need to allocate the entire |
| * relocation tree as a single array. |
| */ |
| if (exec[i].relocation_count > relocs_max - relocs_total) |
| return -EINVAL; |
| relocs_total += exec[i].relocation_count; |
| |
| length = exec[i].relocation_count * |
| sizeof(struct drm_i915_gem_relocation_entry); |
| /* |
| * We must check that the entire relocation array is safe |
| * to read, but since we may need to update the presumed |
| * offsets during execution, check for full write access. |
| */ |
| if (!access_ok(VERIFY_WRITE, ptr, length)) |
| return -EFAULT; |
| |
| if (likely(!i915.prefault_disable)) { |
| if (fault_in_pages_readable(ptr, length)) |
| return -EFAULT; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int eb_select_context(struct i915_execbuffer *eb) |
| { |
| unsigned int ctx_id = i915_execbuffer2_get_context_id(*eb->args); |
| struct i915_gem_context *ctx; |
| |
| ctx = i915_gem_context_lookup(eb->file->driver_priv, ctx_id); |
| if (unlikely(IS_ERR(ctx))) |
| return PTR_ERR(ctx); |
| |
| if (unlikely(i915_gem_context_is_banned(ctx))) { |
| DRM_DEBUG("Context %u tried to submit while banned\n", ctx_id); |
| return -EIO; |
| } |
| |
| eb->ctx = i915_gem_context_get(ctx); |
| eb->vm = ctx->ppgtt ? &ctx->ppgtt->base : &eb->i915->ggtt.base; |
| |
| return 0; |
| } |
| |
| void i915_vma_move_to_active(struct i915_vma *vma, |
| struct drm_i915_gem_request *req, |
| unsigned int flags) |
| { |
| struct drm_i915_gem_object *obj = vma->obj; |
| const unsigned int idx = req->engine->id; |
| |
| lockdep_assert_held(&req->i915->drm.struct_mutex); |
| GEM_BUG_ON(!drm_mm_node_allocated(&vma->node)); |
| |
| /* Add a reference if we're newly entering the active list. |
| * The order in which we add operations to the retirement queue is |
| * vital here: mark_active adds to the start of the callback list, |
| * such that subsequent callbacks are called first. Therefore we |
| * add the active reference first and queue for it to be dropped |
| * *last*. |
| */ |
| if (!i915_vma_is_active(vma)) |
| obj->active_count++; |
| i915_vma_set_active(vma, idx); |
| i915_gem_active_set(&vma->last_read[idx], req); |
| list_move_tail(&vma->vm_link, &vma->vm->active_list); |
| |
| obj->base.write_domain = 0; |
| if (flags & EXEC_OBJECT_WRITE) { |
| obj->base.write_domain = I915_GEM_DOMAIN_RENDER; |
| |
| if (intel_fb_obj_invalidate(obj, ORIGIN_CS)) |
| i915_gem_active_set(&obj->frontbuffer_write, req); |
| |
| obj->base.read_domains = 0; |
| } |
| obj->base.read_domains |= I915_GEM_GPU_DOMAINS; |
| |
| if (flags & EXEC_OBJECT_NEEDS_FENCE) |
| i915_gem_active_set(&vma->last_fence, req); |
| } |
| |
| static void eb_export_fence(struct drm_i915_gem_object *obj, |
| struct drm_i915_gem_request *req, |
| unsigned int flags) |
| { |
| struct reservation_object *resv = obj->resv; |
| |
| /* Ignore errors from failing to allocate the new fence, we can't |
| * handle an error right now. Worst case should be missed |
| * synchronisation leading to rendering corruption. |
| */ |
| reservation_object_lock(resv, NULL); |
| if (flags & EXEC_OBJECT_WRITE) |
| reservation_object_add_excl_fence(resv, &req->fence); |
| else if (reservation_object_reserve_shared(resv) == 0) |
| reservation_object_add_shared_fence(resv, &req->fence); |
| reservation_object_unlock(resv); |
| } |
| |
| static void |
| eb_move_to_active(struct i915_execbuffer *eb) |
| { |
| struct i915_vma *vma; |
| |
| list_for_each_entry(vma, &eb->vmas, exec_link) { |
| struct drm_i915_gem_object *obj = vma->obj; |
| |
| obj->base.write_domain = 0; |
| if (vma->exec_entry->flags & EXEC_OBJECT_WRITE) |
| obj->base.read_domains = 0; |
| obj->base.read_domains |= I915_GEM_GPU_DOMAINS; |
| |
| i915_vma_move_to_active(vma, eb->request, vma->exec_entry->flags); |
| eb_export_fence(obj, eb->request, vma->exec_entry->flags); |
| } |
| } |
| |
| static int |
| i915_reset_gen7_sol_offsets(struct drm_i915_gem_request *req) |
| { |
| u32 *cs; |
| int i; |
| |
| if (!IS_GEN7(req->i915) || req->engine->id != RCS) { |
| DRM_DEBUG("sol reset is gen7/rcs only\n"); |
| return -EINVAL; |
| } |
| |
| cs = intel_ring_begin(req, 4 * 3); |
| if (IS_ERR(cs)) |
| return PTR_ERR(cs); |
| |
| for (i = 0; i < 4; i++) { |
| *cs++ = MI_LOAD_REGISTER_IMM(1); |
| *cs++ = i915_mmio_reg_offset(GEN7_SO_WRITE_OFFSET(i)); |
| *cs++ = 0; |
| } |
| |
| intel_ring_advance(req, cs); |
| |
| return 0; |
| } |
| |
| static struct i915_vma *eb_parse(struct i915_execbuffer *eb, bool is_master) |
| { |
| struct drm_i915_gem_object *shadow_batch_obj; |
| struct i915_vma *vma; |
| int ret; |
| |
| shadow_batch_obj = i915_gem_batch_pool_get(&eb->engine->batch_pool, |
| PAGE_ALIGN(eb->batch_len)); |
| if (IS_ERR(shadow_batch_obj)) |
| return ERR_CAST(shadow_batch_obj); |
| |
| ret = intel_engine_cmd_parser(eb->engine, |
| eb->batch->obj, |
| shadow_batch_obj, |
| eb->batch_start_offset, |
| eb->batch_len, |
| is_master); |
| if (ret) { |
| if (ret == -EACCES) /* unhandled chained batch */ |
| vma = NULL; |
| else |
| vma = ERR_PTR(ret); |
| goto out; |
| } |
| |
| vma = i915_gem_object_ggtt_pin(shadow_batch_obj, NULL, 0, 0, 0); |
| if (IS_ERR(vma)) |
| goto out; |
| |
| vma->exec_entry = |
| memset(&eb->shadow_exec_entry, 0, sizeof(*vma->exec_entry)); |
| vma->exec_entry->flags = __EXEC_OBJECT_HAS_PIN; |
| i915_gem_object_get(shadow_batch_obj); |
| list_add_tail(&vma->exec_link, &eb->vmas); |
| |
| out: |
| i915_gem_object_unpin_pages(shadow_batch_obj); |
| return vma; |
| } |
| |
| static void |
| add_to_client(struct drm_i915_gem_request *req, |
| struct drm_file *file) |
| { |
| req->file_priv = file->driver_priv; |
| list_add_tail(&req->client_link, &req->file_priv->mm.request_list); |
| } |
| |
| static int |
| execbuf_submit(struct i915_execbuffer *eb) |
| { |
| int ret; |
| |
| ret = eb_move_to_gpu(eb); |
| if (ret) |
| return ret; |
| |
| ret = i915_switch_context(eb->request); |
| if (ret) |
| return ret; |
| |
| if (eb->args->flags & I915_EXEC_GEN7_SOL_RESET) { |
| ret = i915_reset_gen7_sol_offsets(eb->request); |
| if (ret) |
| return ret; |
| } |
| |
| ret = eb->engine->emit_bb_start(eb->request, |
| eb->batch->node.start + |
| eb->batch_start_offset, |
| eb->batch_len, |
| eb->dispatch_flags); |
| if (ret) |
| return ret; |
| |
| eb_move_to_active(eb); |
| |
| return 0; |
| } |
| |
| /** |
| * Find one BSD ring to dispatch the corresponding BSD command. |
| * The engine index is returned. |
| */ |
| static unsigned int |
| gen8_dispatch_bsd_engine(struct drm_i915_private *dev_priv, |
| struct drm_file *file) |
| { |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| |
| /* Check whether the file_priv has already selected one ring. */ |
| if ((int)file_priv->bsd_engine < 0) |
| file_priv->bsd_engine = atomic_fetch_xor(1, |
| &dev_priv->mm.bsd_engine_dispatch_index); |
| |
| return file_priv->bsd_engine; |
| } |
| |
| #define I915_USER_RINGS (4) |
| |
| static const enum intel_engine_id user_ring_map[I915_USER_RINGS + 1] = { |
| [I915_EXEC_DEFAULT] = RCS, |
| [I915_EXEC_RENDER] = RCS, |
| [I915_EXEC_BLT] = BCS, |
| [I915_EXEC_BSD] = VCS, |
| [I915_EXEC_VEBOX] = VECS |
| }; |
| |
| static struct intel_engine_cs * |
| eb_select_engine(struct drm_i915_private *dev_priv, |
| struct drm_file *file, |
| struct drm_i915_gem_execbuffer2 *args) |
| { |
| unsigned int user_ring_id = args->flags & I915_EXEC_RING_MASK; |
| struct intel_engine_cs *engine; |
| |
| if (user_ring_id > I915_USER_RINGS) { |
| DRM_DEBUG("execbuf with unknown ring: %u\n", user_ring_id); |
| return NULL; |
| } |
| |
| if ((user_ring_id != I915_EXEC_BSD) && |
| ((args->flags & I915_EXEC_BSD_MASK) != 0)) { |
| DRM_DEBUG("execbuf with non bsd ring but with invalid " |
| "bsd dispatch flags: %d\n", (int)(args->flags)); |
| return NULL; |
| } |
| |
| if (user_ring_id == I915_EXEC_BSD && HAS_BSD2(dev_priv)) { |
| unsigned int bsd_idx = args->flags & I915_EXEC_BSD_MASK; |
| |
| if (bsd_idx == I915_EXEC_BSD_DEFAULT) { |
| bsd_idx = gen8_dispatch_bsd_engine(dev_priv, file); |
| } else if (bsd_idx >= I915_EXEC_BSD_RING1 && |
| bsd_idx <= I915_EXEC_BSD_RING2) { |
| bsd_idx >>= I915_EXEC_BSD_SHIFT; |
| bsd_idx--; |
| } else { |
| DRM_DEBUG("execbuf with unknown bsd ring: %u\n", |
| bsd_idx); |
| return NULL; |
| } |
| |
| engine = dev_priv->engine[_VCS(bsd_idx)]; |
| } else { |
| engine = dev_priv->engine[user_ring_map[user_ring_id]]; |
| } |
| |
| if (!engine) { |
| DRM_DEBUG("execbuf with invalid ring: %u\n", user_ring_id); |
| return NULL; |
| } |
| |
| return engine; |
| } |
| |
| static int |
| i915_gem_do_execbuffer(struct drm_device *dev, |
| struct drm_file *file, |
| struct drm_i915_gem_execbuffer2 *args, |
| struct drm_i915_gem_exec_object2 *exec) |
| { |
| struct i915_execbuffer eb; |
| struct dma_fence *in_fence = NULL; |
| struct sync_file *out_fence = NULL; |
| int out_fence_fd = -1; |
| int ret; |
| |
| if (!i915_gem_check_execbuffer(args)) |
| return -EINVAL; |
| |
| ret = validate_exec_list(dev, exec, args->buffer_count); |
| if (ret) |
| return ret; |
| |
| eb.i915 = to_i915(dev); |
| eb.file = file; |
| eb.args = args; |
| eb.exec = exec; |
| eb.need_relocs = (args->flags & I915_EXEC_NO_RELOC) == 0; |
| reloc_cache_init(&eb.reloc_cache, eb.i915); |
| |
| eb.batch_start_offset = args->batch_start_offset; |
| eb.batch_len = args->batch_len; |
| |
| eb.dispatch_flags = 0; |
| if (args->flags & I915_EXEC_SECURE) { |
| if (!drm_is_current_master(file) || !capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| eb.dispatch_flags |= I915_DISPATCH_SECURE; |
| } |
| if (args->flags & I915_EXEC_IS_PINNED) |
| eb.dispatch_flags |= I915_DISPATCH_PINNED; |
| |
| eb.engine = eb_select_engine(eb.i915, file, args); |
| if (!eb.engine) |
| return -EINVAL; |
| |
| if (args->flags & I915_EXEC_RESOURCE_STREAMER) { |
| if (!HAS_RESOURCE_STREAMER(eb.i915)) { |
| DRM_DEBUG("RS is only allowed for Haswell, Gen8 and above\n"); |
| return -EINVAL; |
| } |
| if (eb.engine->id != RCS) { |
| DRM_DEBUG("RS is not available on %s\n", |
| eb.engine->name); |
| return -EINVAL; |
| } |
| |
| eb.dispatch_flags |= I915_DISPATCH_RS; |
| } |
| |
| if (args->flags & I915_EXEC_FENCE_IN) { |
| in_fence = sync_file_get_fence(lower_32_bits(args->rsvd2)); |
| if (!in_fence) |
| return -EINVAL; |
| } |
| |
| if (args->flags & I915_EXEC_FENCE_OUT) { |
| out_fence_fd = get_unused_fd_flags(O_CLOEXEC); |
| if (out_fence_fd < 0) { |
| ret = out_fence_fd; |
| goto err_in_fence; |
| } |
| } |
| |
| /* Take a local wakeref for preparing to dispatch the execbuf as |
| * we expect to access the hardware fairly frequently in the |
| * process. Upon first dispatch, we acquire another prolonged |
| * wakeref that we hold until the GPU has been idle for at least |
| * 100ms. |
| */ |
| intel_runtime_pm_get(eb.i915); |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| goto pre_mutex_err; |
| |
| ret = eb_select_context(&eb); |
| if (ret) { |
| mutex_unlock(&dev->struct_mutex); |
| goto pre_mutex_err; |
| } |
| |
| if (eb_create(&eb)) { |
| i915_gem_context_put(eb.ctx); |
| mutex_unlock(&dev->struct_mutex); |
| ret = -ENOMEM; |
| goto pre_mutex_err; |
| } |
| |
| /* Look up object handles */ |
| ret = eb_lookup_vmas(&eb); |
| if (ret) |
| goto err; |
| |
| /* take note of the batch buffer before we might reorder the lists */ |
| eb.batch = eb_get_batch(&eb); |
| |
| /* Move the objects en-masse into the GTT, evicting if necessary. */ |
| ret = eb_reserve(&eb); |
| if (ret) |
| goto err; |
| |
| /* The objects are in their final locations, apply the relocations. */ |
| if (eb.need_relocs) |
| ret = eb_relocate(&eb); |
| if (ret) { |
| if (ret == -EFAULT) { |
| ret = eb_relocate_slow(&eb); |
| BUG_ON(!mutex_is_locked(&dev->struct_mutex)); |
| } |
| if (ret) |
| goto err; |
| } |
| |
| if (eb.batch->exec_entry->flags & EXEC_OBJECT_WRITE) { |
| DRM_DEBUG("Attempting to use self-modifying batch buffer\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| if (eb.batch_start_offset > eb.batch->size || |
| eb.batch_len > eb.batch->size - eb.batch_start_offset) { |
| DRM_DEBUG("Attempting to use out-of-bounds batch\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| if (eb.engine->needs_cmd_parser && eb.batch_len) { |
| struct i915_vma *vma; |
| |
| vma = eb_parse(&eb, drm_is_current_master(file)); |
| if (IS_ERR(vma)) { |
| ret = PTR_ERR(vma); |
| goto err; |
| } |
| |
| if (vma) { |
| /* |
| * Batch parsed and accepted: |
| * |
| * Set the DISPATCH_SECURE bit to remove the NON_SECURE |
| * bit from MI_BATCH_BUFFER_START commands issued in |
| * the dispatch_execbuffer implementations. We |
| * specifically don't want that set on batches the |
| * command parser has accepted. |
| */ |
| eb.dispatch_flags |= I915_DISPATCH_SECURE; |
| eb.batch_start_offset = 0; |
| eb.batch = vma; |
| } |
| } |
| |
| if (eb.batch_len == 0) |
| eb.batch_len = eb.batch->size - eb.batch_start_offset; |
| |
| /* snb/ivb/vlv conflate the "batch in ppgtt" bit with the "non-secure |
| * batch" bit. Hence we need to pin secure batches into the global gtt. |
| * hsw should have this fixed, but bdw mucks it up again. */ |
| if (eb.dispatch_flags & I915_DISPATCH_SECURE) { |
| struct drm_i915_gem_object *obj = eb.batch->obj; |
| struct i915_vma *vma; |
| |
| /* |
| * So on first glance it looks freaky that we pin the batch here |
| * outside of the reservation loop. But: |
| * - The batch is already pinned into the relevant ppgtt, so we |
| * already have the backing storage fully allocated. |
| * - No other BO uses the global gtt (well contexts, but meh), |
| * so we don't really have issues with multiple objects not |
| * fitting due to fragmentation. |
| * So this is actually safe. |
| */ |
| vma = i915_gem_object_ggtt_pin(obj, NULL, 0, 0, 0); |
| if (IS_ERR(vma)) { |
| ret = PTR_ERR(vma); |
| goto err; |
| } |
| |
| eb.batch = vma; |
| } |
| |
| /* Allocate a request for this batch buffer nice and early. */ |
| eb.request = i915_gem_request_alloc(eb.engine, eb.ctx); |
| if (IS_ERR(eb.request)) { |
| ret = PTR_ERR(eb.request); |
| goto err_batch_unpin; |
| } |
| |
| if (in_fence) { |
| ret = i915_gem_request_await_dma_fence(eb.request, in_fence); |
| if (ret < 0) |
| goto err_request; |
| } |
| |
| if (out_fence_fd != -1) { |
| out_fence = sync_file_create(&eb.request->fence); |
| if (!out_fence) { |
| ret = -ENOMEM; |
| goto err_request; |
| } |
| } |
| |
| /* Whilst this request exists, batch_obj will be on the |
| * active_list, and so will hold the active reference. Only when this |
| * request is retired will the the batch_obj be moved onto the |
| * inactive_list and lose its active reference. Hence we do not need |
| * to explicitly hold another reference here. |
| */ |
| eb.request->batch = eb.batch; |
| |
| trace_i915_gem_request_queue(eb.request, eb.dispatch_flags); |
| ret = execbuf_submit(&eb); |
| err_request: |
| __i915_add_request(eb.request, ret == 0); |
| add_to_client(eb.request, file); |
| |
| if (out_fence) { |
| if (ret == 0) { |
| fd_install(out_fence_fd, out_fence->file); |
| args->rsvd2 &= GENMASK_ULL(0, 31); /* keep in-fence */ |
| args->rsvd2 |= (u64)out_fence_fd << 32; |
| out_fence_fd = -1; |
| } else { |
| fput(out_fence->file); |
| } |
| } |
| |
| err_batch_unpin: |
| /* |
| * FIXME: We crucially rely upon the active tracking for the (ppgtt) |
| * batch vma for correctness. For less ugly and less fragility this |
| * needs to be adjusted to also track the ggtt batch vma properly as |
| * active. |
| */ |
| if (eb.dispatch_flags & I915_DISPATCH_SECURE) |
| i915_vma_unpin(eb.batch); |
| err: |
| /* the request owns the ref now */ |
| eb_destroy(&eb); |
| mutex_unlock(&dev->struct_mutex); |
| |
| pre_mutex_err: |
| /* intel_gpu_busy should also get a ref, so it will free when the device |
| * is really idle. */ |
| intel_runtime_pm_put(eb.i915); |
| if (out_fence_fd != -1) |
| put_unused_fd(out_fence_fd); |
| err_in_fence: |
| dma_fence_put(in_fence); |
| return ret; |
| } |
| |
| /* |
| * Legacy execbuffer just creates an exec2 list from the original exec object |
| * list array and passes it to the real function. |
| */ |
| int |
| i915_gem_execbuffer(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_execbuffer *args = data; |
| struct drm_i915_gem_execbuffer2 exec2; |
| struct drm_i915_gem_exec_object *exec_list = NULL; |
| struct drm_i915_gem_exec_object2 *exec2_list = NULL; |
| int ret, i; |
| |
| if (args->buffer_count < 1) { |
| DRM_DEBUG("execbuf with %d buffers\n", args->buffer_count); |
| return -EINVAL; |
| } |
| |
| /* Copy in the exec list from userland */ |
| exec_list = kvmalloc_array(sizeof(*exec_list), args->buffer_count, GFP_KERNEL); |
| exec2_list = kvmalloc_array(sizeof(*exec2_list), args->buffer_count, GFP_KERNEL); |
| if (exec_list == NULL || exec2_list == NULL) { |
| DRM_DEBUG("Failed to allocate exec list for %d buffers\n", |
| args->buffer_count); |
| kvfree(exec_list); |
| kvfree(exec2_list); |
| return -ENOMEM; |
| } |
| ret = copy_from_user(exec_list, |
| u64_to_user_ptr(args->buffers_ptr), |
| sizeof(*exec_list) * args->buffer_count); |
| if (ret != 0) { |
| DRM_DEBUG("copy %d exec entries failed %d\n", |
| args->buffer_count, ret); |
| kvfree(exec_list); |
| kvfree(exec2_list); |
| return -EFAULT; |
| } |
| |
| for (i = 0; i < args->buffer_count; i++) { |
| exec2_list[i].handle = exec_list[i].handle; |
| exec2_list[i].relocation_count = exec_list[i].relocation_count; |
| exec2_list[i].relocs_ptr = exec_list[i].relocs_ptr; |
| exec2_list[i].alignment = exec_list[i].alignment; |
| exec2_list[i].offset = exec_list[i].offset; |
| if (INTEL_GEN(to_i915(dev)) < 4) |
| exec2_list[i].flags = EXEC_OBJECT_NEEDS_FENCE; |
| else |
| exec2_list[i].flags = 0; |
| } |
| |
| exec2.buffers_ptr = args->buffers_ptr; |
| exec2.buffer_count = args->buffer_count; |
| exec2.batch_start_offset = args->batch_start_offset; |
| exec2.batch_len = args->batch_len; |
| exec2.DR1 = args->DR1; |
| exec2.DR4 = args->DR4; |
| exec2.num_cliprects = args->num_cliprects; |
| exec2.cliprects_ptr = args->cliprects_ptr; |
| exec2.flags = I915_EXEC_RENDER; |
| i915_execbuffer2_set_context_id(exec2, 0); |
| |
| ret = i915_gem_do_execbuffer(dev, file, &exec2, exec2_list); |
| if (!ret) { |
| struct drm_i915_gem_exec_object __user *user_exec_list = |
| u64_to_user_ptr(args->buffers_ptr); |
| |
| /* Copy the new buffer offsets back to the user's exec list. */ |
| for (i = 0; i < args->buffer_count; i++) { |
| exec2_list[i].offset = |
| gen8_canonical_addr(exec2_list[i].offset); |
| ret = __copy_to_user(&user_exec_list[i].offset, |
| &exec2_list[i].offset, |
| sizeof(user_exec_list[i].offset)); |
| if (ret) { |
| ret = -EFAULT; |
| DRM_DEBUG("failed to copy %d exec entries " |
| "back to user (%d)\n", |
| args->buffer_count, ret); |
| break; |
| } |
| } |
| } |
| |
| kvfree(exec_list); |
| kvfree(exec2_list); |
| return ret; |
| } |
| |
| int |
| i915_gem_execbuffer2(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_execbuffer2 *args = data; |
| struct drm_i915_gem_exec_object2 *exec2_list = NULL; |
| int ret; |
| |
| if (args->buffer_count < 1 || |
| args->buffer_count > UINT_MAX / sizeof(*exec2_list)) { |
| DRM_DEBUG("execbuf2 with %d buffers\n", args->buffer_count); |
| return -EINVAL; |
| } |
| |
| exec2_list = kvmalloc_array(args->buffer_count, |
| sizeof(*exec2_list), |
| GFP_TEMPORARY); |
| if (exec2_list == NULL) { |
| DRM_DEBUG("Failed to allocate exec list for %d buffers\n", |
| args->buffer_count); |
| return -ENOMEM; |
| } |
| ret = copy_from_user(exec2_list, |
| u64_to_user_ptr(args->buffers_ptr), |
| sizeof(*exec2_list) * args->buffer_count); |
| if (ret != 0) { |
| DRM_DEBUG("copy %d exec entries failed %d\n", |
| args->buffer_count, ret); |
| kvfree(exec2_list); |
| return -EFAULT; |
| } |
| |
| ret = i915_gem_do_execbuffer(dev, file, args, exec2_list); |
| if (!ret) { |
| /* Copy the new buffer offsets back to the user's exec list. */ |
| struct drm_i915_gem_exec_object2 __user *user_exec_list = |
| u64_to_user_ptr(args->buffers_ptr); |
| int i; |
| |
| for (i = 0; i < args->buffer_count; i++) { |
| exec2_list[i].offset = |
| gen8_canonical_addr(exec2_list[i].offset); |
| ret = __copy_to_user(&user_exec_list[i].offset, |
| &exec2_list[i].offset, |
| sizeof(user_exec_list[i].offset)); |
| if (ret) { |
| ret = -EFAULT; |
| DRM_DEBUG("failed to copy %d exec entries " |
| "back to user\n", |
| args->buffer_count); |
| break; |
| } |
| } |
| } |
| |
| kvfree(exec2_list); |
| return ret; |
| } |