| /* |
| * CE4100's SPI device is more or less the same one as found on PXA |
| * |
| */ |
| #include <linux/pci.h> |
| #include <linux/platform_device.h> |
| #include <linux/of_device.h> |
| #include <linux/module.h> |
| #include <linux/spi/pxa2xx_spi.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| |
| #include <linux/dmaengine.h> |
| #include <linux/platform_data/dma-dw.h> |
| |
| enum { |
| PORT_CE4100, |
| PORT_BYT, |
| PORT_BSW0, |
| PORT_BSW1, |
| PORT_BSW2, |
| PORT_QUARK_X1000, |
| }; |
| |
| struct pxa_spi_info { |
| enum pxa_ssp_type type; |
| int port_id; |
| int num_chipselect; |
| unsigned long max_clk_rate; |
| |
| /* DMA channel request parameters */ |
| void *tx_param; |
| void *rx_param; |
| }; |
| |
| static struct dw_dma_slave byt_tx_param = { .dst_id = 0 }; |
| static struct dw_dma_slave byt_rx_param = { .src_id = 1 }; |
| |
| static struct dw_dma_slave bsw0_tx_param = { .dst_id = 0 }; |
| static struct dw_dma_slave bsw0_rx_param = { .src_id = 1 }; |
| static struct dw_dma_slave bsw1_tx_param = { .dst_id = 6 }; |
| static struct dw_dma_slave bsw1_rx_param = { .src_id = 7 }; |
| static struct dw_dma_slave bsw2_tx_param = { .dst_id = 8 }; |
| static struct dw_dma_slave bsw2_rx_param = { .src_id = 9 }; |
| |
| static bool lpss_dma_filter(struct dma_chan *chan, void *param) |
| { |
| struct dw_dma_slave *dws = param; |
| |
| if (dws->dma_dev != chan->device->dev) |
| return false; |
| |
| chan->private = dws; |
| return true; |
| } |
| |
| static struct pxa_spi_info spi_info_configs[] = { |
| [PORT_CE4100] = { |
| .type = PXA25x_SSP, |
| .port_id = -1, |
| .num_chipselect = -1, |
| .max_clk_rate = 3686400, |
| }, |
| [PORT_BYT] = { |
| .type = LPSS_BYT_SSP, |
| .port_id = 0, |
| .num_chipselect = 1, |
| .max_clk_rate = 50000000, |
| .tx_param = &byt_tx_param, |
| .rx_param = &byt_rx_param, |
| }, |
| [PORT_BSW0] = { |
| .type = LPSS_BYT_SSP, |
| .port_id = 0, |
| .num_chipselect = 1, |
| .max_clk_rate = 50000000, |
| .tx_param = &bsw0_tx_param, |
| .rx_param = &bsw0_rx_param, |
| }, |
| [PORT_BSW1] = { |
| .type = LPSS_BYT_SSP, |
| .port_id = 1, |
| .num_chipselect = 1, |
| .max_clk_rate = 50000000, |
| .tx_param = &bsw1_tx_param, |
| .rx_param = &bsw1_rx_param, |
| }, |
| [PORT_BSW2] = { |
| .type = LPSS_BYT_SSP, |
| .port_id = 2, |
| .num_chipselect = 1, |
| .max_clk_rate = 50000000, |
| .tx_param = &bsw2_tx_param, |
| .rx_param = &bsw2_rx_param, |
| }, |
| [PORT_QUARK_X1000] = { |
| .type = QUARK_X1000_SSP, |
| .port_id = -1, |
| .num_chipselect = 1, |
| .max_clk_rate = 50000000, |
| }, |
| }; |
| |
| static int pxa2xx_spi_pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *ent) |
| { |
| struct platform_device_info pi; |
| int ret; |
| struct platform_device *pdev; |
| struct pxa2xx_spi_master spi_pdata; |
| struct ssp_device *ssp; |
| struct pxa_spi_info *c; |
| char buf[40]; |
| struct pci_dev *dma_dev; |
| |
| ret = pcim_enable_device(dev); |
| if (ret) |
| return ret; |
| |
| ret = pcim_iomap_regions(dev, 1 << 0, "PXA2xx SPI"); |
| if (ret) |
| return ret; |
| |
| c = &spi_info_configs[ent->driver_data]; |
| |
| memset(&spi_pdata, 0, sizeof(spi_pdata)); |
| spi_pdata.num_chipselect = (c->num_chipselect > 0) ? |
| c->num_chipselect : dev->devfn; |
| |
| dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); |
| |
| if (c->tx_param) { |
| struct dw_dma_slave *slave = c->tx_param; |
| |
| slave->dma_dev = &dma_dev->dev; |
| slave->src_master = 1; |
| slave->dst_master = 0; |
| } |
| |
| if (c->rx_param) { |
| struct dw_dma_slave *slave = c->rx_param; |
| |
| slave->dma_dev = &dma_dev->dev; |
| slave->src_master = 1; |
| slave->dst_master = 0; |
| } |
| |
| spi_pdata.dma_filter = lpss_dma_filter; |
| spi_pdata.tx_param = c->tx_param; |
| spi_pdata.rx_param = c->rx_param; |
| spi_pdata.enable_dma = c->rx_param && c->tx_param; |
| |
| ssp = &spi_pdata.ssp; |
| ssp->phys_base = pci_resource_start(dev, 0); |
| ssp->mmio_base = pcim_iomap_table(dev)[0]; |
| if (!ssp->mmio_base) { |
| dev_err(&dev->dev, "failed to ioremap() registers\n"); |
| return -EIO; |
| } |
| ssp->irq = dev->irq; |
| ssp->port_id = (c->port_id >= 0) ? c->port_id : dev->devfn; |
| ssp->type = c->type; |
| |
| snprintf(buf, sizeof(buf), "pxa2xx-spi.%d", ssp->port_id); |
| ssp->clk = clk_register_fixed_rate(&dev->dev, buf , NULL, |
| CLK_IS_ROOT, c->max_clk_rate); |
| if (IS_ERR(ssp->clk)) |
| return PTR_ERR(ssp->clk); |
| |
| memset(&pi, 0, sizeof(pi)); |
| pi.parent = &dev->dev; |
| pi.name = "pxa2xx-spi"; |
| pi.id = ssp->port_id; |
| pi.data = &spi_pdata; |
| pi.size_data = sizeof(spi_pdata); |
| |
| pdev = platform_device_register_full(&pi); |
| if (IS_ERR(pdev)) { |
| clk_unregister(ssp->clk); |
| return PTR_ERR(pdev); |
| } |
| |
| pci_set_drvdata(dev, pdev); |
| |
| return 0; |
| } |
| |
| static void pxa2xx_spi_pci_remove(struct pci_dev *dev) |
| { |
| struct platform_device *pdev = pci_get_drvdata(dev); |
| struct pxa2xx_spi_master *spi_pdata; |
| |
| spi_pdata = dev_get_platdata(&pdev->dev); |
| |
| platform_device_unregister(pdev); |
| clk_unregister(spi_pdata->ssp.clk); |
| } |
| |
| static const struct pci_device_id pxa2xx_spi_pci_devices[] = { |
| { PCI_VDEVICE(INTEL, 0x2e6a), PORT_CE4100 }, |
| { PCI_VDEVICE(INTEL, 0x0935), PORT_QUARK_X1000 }, |
| { PCI_VDEVICE(INTEL, 0x0f0e), PORT_BYT }, |
| { PCI_VDEVICE(INTEL, 0x228e), PORT_BSW0 }, |
| { PCI_VDEVICE(INTEL, 0x2290), PORT_BSW1 }, |
| { PCI_VDEVICE(INTEL, 0x22ac), PORT_BSW2 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(pci, pxa2xx_spi_pci_devices); |
| |
| static struct pci_driver pxa2xx_spi_pci_driver = { |
| .name = "pxa2xx_spi_pci", |
| .id_table = pxa2xx_spi_pci_devices, |
| .probe = pxa2xx_spi_pci_probe, |
| .remove = pxa2xx_spi_pci_remove, |
| }; |
| |
| module_pci_driver(pxa2xx_spi_pci_driver); |
| |
| MODULE_DESCRIPTION("CE4100/LPSS PCI-SPI glue code for PXA's driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>"); |