| /* |
| * |
| * Intel Management Engine Interface (Intel MEI) Linux driver |
| * Copyright (c) 2003-2012, Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/device.h> |
| #include <linux/sched.h> |
| #include <linux/watchdog.h> |
| |
| #include <linux/mei.h> |
| |
| #include "mei_dev.h" |
| #include "hbm.h" |
| #include "client.h" |
| |
| static const u8 mei_start_wd_params[] = { 0x02, 0x12, 0x13, 0x10 }; |
| static const u8 mei_stop_wd_params[] = { 0x02, 0x02, 0x14, 0x10 }; |
| |
| /* |
| * AMT Watchdog Device |
| */ |
| #define INTEL_AMT_WATCHDOG_ID "INTCAMT" |
| |
| /* UUIDs for AMT F/W clients */ |
| const uuid_le mei_wd_guid = UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, 0x89, |
| 0x9D, 0xA9, 0x15, 0x14, 0xCB, |
| 0x32, 0xAB); |
| |
| static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout) |
| { |
| dev_dbg(dev->dev, "wd: set timeout=%d.\n", timeout); |
| memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE); |
| memcpy(dev->wd_data + MEI_WD_HDR_SIZE, &timeout, sizeof(u16)); |
| } |
| |
| /** |
| * mei_wd_host_init - connect to the watchdog client |
| * |
| * @dev: the device structure |
| * @me_cl: me client |
| * |
| * Return: -ENOTTY if wd client cannot be found |
| * -EIO if write has failed |
| * 0 on success |
| */ |
| int mei_wd_host_init(struct mei_device *dev, struct mei_me_client *me_cl) |
| { |
| struct mei_cl *cl = &dev->wd_cl; |
| int ret; |
| |
| mei_cl_init(cl, dev); |
| |
| dev->wd_timeout = MEI_WD_DEFAULT_TIMEOUT; |
| dev->wd_state = MEI_WD_IDLE; |
| |
| ret = mei_cl_link(cl, MEI_WD_HOST_CLIENT_ID); |
| if (ret < 0) { |
| dev_info(dev->dev, "wd: failed link client\n"); |
| return ret; |
| } |
| |
| ret = mei_cl_connect(cl, me_cl, NULL); |
| if (ret) { |
| dev_err(dev->dev, "wd: failed to connect = %d\n", ret); |
| mei_cl_unlink(cl); |
| return ret; |
| } |
| |
| ret = mei_watchdog_register(dev); |
| if (ret) { |
| mei_cl_disconnect(cl); |
| mei_cl_unlink(cl); |
| } |
| return ret; |
| } |
| |
| /** |
| * mei_wd_send - sends watch dog message to fw. |
| * |
| * @dev: the device structure |
| * |
| * Return: 0 if success, |
| * -EIO when message send fails |
| * -EINVAL when invalid message is to be sent |
| * -ENODEV on flow control failure |
| */ |
| int mei_wd_send(struct mei_device *dev) |
| { |
| struct mei_cl *cl = &dev->wd_cl; |
| struct mei_msg_hdr hdr; |
| int ret; |
| |
| hdr.host_addr = cl->host_client_id; |
| hdr.me_addr = mei_cl_me_id(cl); |
| hdr.msg_complete = 1; |
| hdr.reserved = 0; |
| hdr.internal = 0; |
| |
| if (!memcmp(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE)) |
| hdr.length = MEI_WD_START_MSG_SIZE; |
| else if (!memcmp(dev->wd_data, mei_stop_wd_params, MEI_WD_HDR_SIZE)) |
| hdr.length = MEI_WD_STOP_MSG_SIZE; |
| else { |
| dev_err(dev->dev, "wd: invalid message is to be sent, aborting\n"); |
| return -EINVAL; |
| } |
| |
| ret = mei_write_message(dev, &hdr, dev->wd_data); |
| if (ret) { |
| dev_err(dev->dev, "wd: write message failed\n"); |
| return ret; |
| } |
| |
| ret = mei_cl_flow_ctrl_reduce(cl); |
| if (ret) { |
| dev_err(dev->dev, "wd: flow_ctrl_reduce failed.\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mei_wd_stop - sends watchdog stop message to fw. |
| * |
| * @dev: the device structure |
| * |
| * Return: 0 if success |
| * on error: |
| * -EIO when message send fails |
| * -EINVAL when invalid message is to be sent |
| * -ETIME on message timeout |
| */ |
| int mei_wd_stop(struct mei_device *dev) |
| { |
| struct mei_cl *cl = &dev->wd_cl; |
| int ret; |
| |
| if (!mei_cl_is_connected(cl) || |
| dev->wd_state != MEI_WD_RUNNING) |
| return 0; |
| |
| memcpy(dev->wd_data, mei_stop_wd_params, MEI_WD_STOP_MSG_SIZE); |
| |
| dev->wd_state = MEI_WD_STOPPING; |
| |
| ret = mei_cl_flow_ctrl_creds(cl); |
| if (ret < 0) |
| goto err; |
| |
| if (ret && mei_hbuf_acquire(dev)) { |
| ret = mei_wd_send(dev); |
| if (ret) |
| goto err; |
| dev->wd_pending = false; |
| } else { |
| dev->wd_pending = true; |
| } |
| |
| mutex_unlock(&dev->device_lock); |
| |
| ret = wait_event_timeout(dev->wait_stop_wd, |
| dev->wd_state == MEI_WD_IDLE, |
| msecs_to_jiffies(MEI_WD_STOP_TIMEOUT)); |
| mutex_lock(&dev->device_lock); |
| if (dev->wd_state != MEI_WD_IDLE) { |
| /* timeout */ |
| ret = -ETIME; |
| dev_warn(dev->dev, "wd: stop failed to complete ret=%d\n", ret); |
| goto err; |
| } |
| dev_dbg(dev->dev, "wd: stop completed after %u msec\n", |
| MEI_WD_STOP_TIMEOUT - jiffies_to_msecs(ret)); |
| return 0; |
| err: |
| return ret; |
| } |
| |
| /** |
| * mei_wd_ops_start - wd start command from the watchdog core. |
| * |
| * @wd_dev: watchdog device struct |
| * |
| * Return: 0 if success, negative errno code for failure |
| */ |
| static int mei_wd_ops_start(struct watchdog_device *wd_dev) |
| { |
| struct mei_device *dev; |
| struct mei_cl *cl; |
| int err = -ENODEV; |
| |
| dev = watchdog_get_drvdata(wd_dev); |
| if (!dev) |
| return -ENODEV; |
| |
| cl = &dev->wd_cl; |
| |
| mutex_lock(&dev->device_lock); |
| |
| if (dev->dev_state != MEI_DEV_ENABLED) { |
| dev_dbg(dev->dev, "wd: dev_state != MEI_DEV_ENABLED dev_state = %s\n", |
| mei_dev_state_str(dev->dev_state)); |
| goto end_unlock; |
| } |
| |
| if (!mei_cl_is_connected(cl)) { |
| cl_dbg(dev, cl, "MEI Driver is not connected to Watchdog Client\n"); |
| goto end_unlock; |
| } |
| |
| mei_wd_set_start_timeout(dev, dev->wd_timeout); |
| |
| err = 0; |
| end_unlock: |
| mutex_unlock(&dev->device_lock); |
| return err; |
| } |
| |
| /** |
| * mei_wd_ops_stop - wd stop command from the watchdog core. |
| * |
| * @wd_dev: watchdog device struct |
| * |
| * Return: 0 if success, negative errno code for failure |
| */ |
| static int mei_wd_ops_stop(struct watchdog_device *wd_dev) |
| { |
| struct mei_device *dev; |
| |
| dev = watchdog_get_drvdata(wd_dev); |
| if (!dev) |
| return -ENODEV; |
| |
| mutex_lock(&dev->device_lock); |
| mei_wd_stop(dev); |
| mutex_unlock(&dev->device_lock); |
| |
| return 0; |
| } |
| |
| /** |
| * mei_wd_ops_ping - wd ping command from the watchdog core. |
| * |
| * @wd_dev: watchdog device struct |
| * |
| * Return: 0 if success, negative errno code for failure |
| */ |
| static int mei_wd_ops_ping(struct watchdog_device *wd_dev) |
| { |
| struct mei_device *dev; |
| struct mei_cl *cl; |
| int ret; |
| |
| dev = watchdog_get_drvdata(wd_dev); |
| if (!dev) |
| return -ENODEV; |
| |
| cl = &dev->wd_cl; |
| |
| mutex_lock(&dev->device_lock); |
| |
| if (!mei_cl_is_connected(cl)) { |
| cl_err(dev, cl, "wd: not connected.\n"); |
| ret = -ENODEV; |
| goto end; |
| } |
| |
| dev->wd_state = MEI_WD_RUNNING; |
| |
| ret = mei_cl_flow_ctrl_creds(cl); |
| if (ret < 0) |
| goto end; |
| |
| /* Check if we can send the ping to HW*/ |
| if (ret && mei_hbuf_acquire(dev)) { |
| dev_dbg(dev->dev, "wd: sending ping\n"); |
| |
| ret = mei_wd_send(dev); |
| if (ret) |
| goto end; |
| dev->wd_pending = false; |
| } else { |
| dev->wd_pending = true; |
| } |
| |
| end: |
| mutex_unlock(&dev->device_lock); |
| return ret; |
| } |
| |
| /** |
| * mei_wd_ops_set_timeout - wd set timeout command from the watchdog core. |
| * |
| * @wd_dev: watchdog device struct |
| * @timeout: timeout value to set |
| * |
| * Return: 0 if success, negative errno code for failure |
| */ |
| static int mei_wd_ops_set_timeout(struct watchdog_device *wd_dev, |
| unsigned int timeout) |
| { |
| struct mei_device *dev; |
| |
| dev = watchdog_get_drvdata(wd_dev); |
| if (!dev) |
| return -ENODEV; |
| |
| /* Check Timeout value */ |
| if (timeout < MEI_WD_MIN_TIMEOUT || timeout > MEI_WD_MAX_TIMEOUT) |
| return -EINVAL; |
| |
| mutex_lock(&dev->device_lock); |
| |
| dev->wd_timeout = timeout; |
| wd_dev->timeout = timeout; |
| mei_wd_set_start_timeout(dev, dev->wd_timeout); |
| |
| mutex_unlock(&dev->device_lock); |
| |
| return 0; |
| } |
| |
| /* |
| * Watchdog Device structs |
| */ |
| static const struct watchdog_ops wd_ops = { |
| .owner = THIS_MODULE, |
| .start = mei_wd_ops_start, |
| .stop = mei_wd_ops_stop, |
| .ping = mei_wd_ops_ping, |
| .set_timeout = mei_wd_ops_set_timeout, |
| }; |
| static const struct watchdog_info wd_info = { |
| .identity = INTEL_AMT_WATCHDOG_ID, |
| .options = WDIOF_KEEPALIVEPING | |
| WDIOF_SETTIMEOUT | |
| WDIOF_ALARMONLY, |
| }; |
| |
| static struct watchdog_device amt_wd_dev = { |
| .info = &wd_info, |
| .ops = &wd_ops, |
| .timeout = MEI_WD_DEFAULT_TIMEOUT, |
| .min_timeout = MEI_WD_MIN_TIMEOUT, |
| .max_timeout = MEI_WD_MAX_TIMEOUT, |
| }; |
| |
| |
| int mei_watchdog_register(struct mei_device *dev) |
| { |
| |
| int ret; |
| |
| /* unlock to perserve correct locking order */ |
| mutex_unlock(&dev->device_lock); |
| ret = watchdog_register_device(&amt_wd_dev); |
| mutex_lock(&dev->device_lock); |
| if (ret) { |
| dev_err(dev->dev, "wd: unable to register watchdog device = %d.\n", |
| ret); |
| return ret; |
| } |
| |
| dev_dbg(dev->dev, "wd: successfully register watchdog interface.\n"); |
| watchdog_set_drvdata(&amt_wd_dev, dev); |
| return 0; |
| } |
| |
| void mei_watchdog_unregister(struct mei_device *dev) |
| { |
| if (watchdog_get_drvdata(&amt_wd_dev) == NULL) |
| return; |
| |
| watchdog_set_drvdata(&amt_wd_dev, NULL); |
| watchdog_unregister_device(&amt_wd_dev); |
| } |
| |