of: Always use 'struct device.of_node' to get device node pointer.
The following structure elements duplicate the information in
'struct device.of_node' and so are being eliminated. This patch
makes all readers of these elements use device.of_node instead.
(struct of_device *)->node
(struct dev_archdata *)->prom_node (sparc)
(struct dev_archdata *)->of_node (powerpc & microblaze)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c
index 5b3d944..aba1794 100644
--- a/drivers/net/ibm_newemac/mal.c
+++ b/drivers/net/ibm_newemac/mal.c
@@ -538,11 +538,11 @@
}
mal->index = index;
mal->ofdev = ofdev;
- mal->version = of_device_is_compatible(ofdev->node, "ibm,mcmal2") ? 2 : 1;
+ mal->version = of_device_is_compatible(ofdev->dev.of_node, "ibm,mcmal2") ? 2 : 1;
MAL_DBG(mal, "probe" NL);
- prop = of_get_property(ofdev->node, "num-tx-chans", NULL);
+ prop = of_get_property(ofdev->dev.of_node, "num-tx-chans", NULL);
if (prop == NULL) {
printk(KERN_ERR
"mal%d: can't find MAL num-tx-chans property!\n",
@@ -552,7 +552,7 @@
}
mal->num_tx_chans = prop[0];
- prop = of_get_property(ofdev->node, "num-rx-chans", NULL);
+ prop = of_get_property(ofdev->dev.of_node, "num-rx-chans", NULL);
if (prop == NULL) {
printk(KERN_ERR
"mal%d: can't find MAL num-rx-chans property!\n",
@@ -562,14 +562,14 @@
}
mal->num_rx_chans = prop[0];
- dcr_base = dcr_resource_start(ofdev->node, 0);
+ dcr_base = dcr_resource_start(ofdev->dev.of_node, 0);
if (dcr_base == 0) {
printk(KERN_ERR
"mal%d: can't find DCR resource!\n", index);
err = -ENODEV;
goto fail;
}
- mal->dcr_host = dcr_map(ofdev->node, dcr_base, 0x100);
+ mal->dcr_host = dcr_map(ofdev->dev.of_node, dcr_base, 0x100);
if (!DCR_MAP_OK(mal->dcr_host)) {
printk(KERN_ERR
"mal%d: failed to map DCRs !\n", index);
@@ -577,28 +577,28 @@
goto fail;
}
- if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez")) {
+ if (of_device_is_compatible(ofdev->dev.of_node, "ibm,mcmal-405ez")) {
#if defined(CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT) && \
defined(CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR)
mal->features |= (MAL_FTR_CLEAR_ICINTSTAT |
MAL_FTR_COMMON_ERR_INT);
#else
printk(KERN_ERR "%s: Support for 405EZ not enabled!\n",
- ofdev->node->full_name);
+ ofdev->dev.of_node->full_name);
err = -ENODEV;
goto fail;
#endif
}
- mal->txeob_irq = irq_of_parse_and_map(ofdev->node, 0);
- mal->rxeob_irq = irq_of_parse_and_map(ofdev->node, 1);
- mal->serr_irq = irq_of_parse_and_map(ofdev->node, 2);
+ mal->txeob_irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
+ mal->rxeob_irq = irq_of_parse_and_map(ofdev->dev.of_node, 1);
+ mal->serr_irq = irq_of_parse_and_map(ofdev->dev.of_node, 2);
if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) {
mal->txde_irq = mal->rxde_irq = mal->serr_irq;
} else {
- mal->txde_irq = irq_of_parse_and_map(ofdev->node, 3);
- mal->rxde_irq = irq_of_parse_and_map(ofdev->node, 4);
+ mal->txde_irq = irq_of_parse_and_map(ofdev->dev.of_node, 3);
+ mal->rxde_irq = irq_of_parse_and_map(ofdev->dev.of_node, 4);
}
if (mal->txeob_irq == NO_IRQ || mal->rxeob_irq == NO_IRQ ||
@@ -629,7 +629,7 @@
/* Current Axon is not happy with priority being non-0, it can
* deadlock, fix it up here
*/
- if (of_device_is_compatible(ofdev->node, "ibm,mcmal-axon"))
+ if (of_device_is_compatible(ofdev->dev.of_node, "ibm,mcmal-axon"))
cfg &= ~(MAL2_CFG_RPP_10 | MAL2_CFG_WPP_10);
/* Apply configuration */
@@ -701,7 +701,7 @@
printk(KERN_INFO
"MAL v%d %s, %d TX channels, %d RX channels\n",
- mal->version, ofdev->node->full_name,
+ mal->version, ofdev->dev.of_node->full_name,
mal->num_tx_chans, mal->num_rx_chans);
/* Advertise this instance to the rest of the world */