| /* |
| * Copyright (c) 2015 Oracle. All rights reserved. |
| * |
| * Support for backward direction RPCs on RPC/RDMA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/sunrpc/xprt.h> |
| #include <linux/sunrpc/svc.h> |
| #include <linux/sunrpc/svc_xprt.h> |
| |
| #include "xprt_rdma.h" |
| |
| #if IS_ENABLED(CONFIG_SUNRPC_DEBUG) |
| # define RPCDBG_FACILITY RPCDBG_TRANS |
| #endif |
| |
| #undef RPCRDMA_BACKCHANNEL_DEBUG |
| |
| static void rpcrdma_bc_free_rqst(struct rpcrdma_xprt *r_xprt, |
| struct rpc_rqst *rqst) |
| { |
| struct rpcrdma_buffer *buf = &r_xprt->rx_buf; |
| struct rpcrdma_req *req = rpcr_to_rdmar(rqst); |
| |
| spin_lock(&buf->rb_reqslock); |
| list_del(&req->rl_all); |
| spin_unlock(&buf->rb_reqslock); |
| |
| rpcrdma_destroy_req(req); |
| |
| kfree(rqst); |
| } |
| |
| static int rpcrdma_bc_setup_rqst(struct rpcrdma_xprt *r_xprt, |
| struct rpc_rqst *rqst) |
| { |
| struct rpcrdma_regbuf *rb; |
| struct rpcrdma_req *req; |
| size_t size; |
| |
| req = rpcrdma_create_req(r_xprt); |
| if (IS_ERR(req)) |
| return PTR_ERR(req); |
| __set_bit(RPCRDMA_REQ_F_BACKCHANNEL, &req->rl_flags); |
| |
| rb = rpcrdma_alloc_regbuf(RPCRDMA_HDRBUF_SIZE, |
| DMA_TO_DEVICE, GFP_KERNEL); |
| if (IS_ERR(rb)) |
| goto out_fail; |
| req->rl_rdmabuf = rb; |
| xdr_buf_init(&req->rl_hdrbuf, rb->rg_base, rdmab_length(rb)); |
| |
| size = r_xprt->rx_data.inline_rsize; |
| rb = rpcrdma_alloc_regbuf(size, DMA_TO_DEVICE, GFP_KERNEL); |
| if (IS_ERR(rb)) |
| goto out_fail; |
| req->rl_sendbuf = rb; |
| xdr_buf_init(&rqst->rq_snd_buf, rb->rg_base, |
| min_t(size_t, size, PAGE_SIZE)); |
| rpcrdma_set_xprtdata(rqst, req); |
| return 0; |
| |
| out_fail: |
| rpcrdma_bc_free_rqst(r_xprt, rqst); |
| return -ENOMEM; |
| } |
| |
| /* Allocate and add receive buffers to the rpcrdma_buffer's |
| * existing list of rep's. These are released when the |
| * transport is destroyed. |
| */ |
| static int rpcrdma_bc_setup_reps(struct rpcrdma_xprt *r_xprt, |
| unsigned int count) |
| { |
| struct rpcrdma_rep *rep; |
| int rc = 0; |
| |
| while (count--) { |
| rep = rpcrdma_create_rep(r_xprt); |
| if (IS_ERR(rep)) { |
| pr_err("RPC: %s: reply buffer alloc failed\n", |
| __func__); |
| rc = PTR_ERR(rep); |
| break; |
| } |
| |
| rpcrdma_recv_buffer_put(rep); |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * xprt_rdma_bc_setup - Pre-allocate resources for handling backchannel requests |
| * @xprt: transport associated with these backchannel resources |
| * @reqs: number of concurrent incoming requests to expect |
| * |
| * Returns 0 on success; otherwise a negative errno |
| */ |
| int xprt_rdma_bc_setup(struct rpc_xprt *xprt, unsigned int reqs) |
| { |
| struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt); |
| struct rpcrdma_buffer *buffer = &r_xprt->rx_buf; |
| struct rpc_rqst *rqst; |
| unsigned int i; |
| int rc; |
| |
| /* The backchannel reply path returns each rpc_rqst to the |
| * bc_pa_list _after_ the reply is sent. If the server is |
| * faster than the client, it can send another backward |
| * direction request before the rpc_rqst is returned to the |
| * list. The client rejects the request in this case. |
| * |
| * Twice as many rpc_rqsts are prepared to ensure there is |
| * always an rpc_rqst available as soon as a reply is sent. |
| */ |
| if (reqs > RPCRDMA_BACKWARD_WRS >> 1) |
| goto out_err; |
| |
| for (i = 0; i < (reqs << 1); i++) { |
| rqst = kzalloc(sizeof(*rqst), GFP_KERNEL); |
| if (!rqst) |
| goto out_free; |
| |
| dprintk("RPC: %s: new rqst %p\n", __func__, rqst); |
| |
| rqst->rq_xprt = &r_xprt->rx_xprt; |
| INIT_LIST_HEAD(&rqst->rq_list); |
| INIT_LIST_HEAD(&rqst->rq_bc_list); |
| |
| if (rpcrdma_bc_setup_rqst(r_xprt, rqst)) |
| goto out_free; |
| |
| spin_lock_bh(&xprt->bc_pa_lock); |
| list_add(&rqst->rq_bc_pa_list, &xprt->bc_pa_list); |
| spin_unlock_bh(&xprt->bc_pa_lock); |
| } |
| |
| rc = rpcrdma_bc_setup_reps(r_xprt, reqs); |
| if (rc) |
| goto out_free; |
| |
| rc = rpcrdma_ep_post_extra_recv(r_xprt, reqs); |
| if (rc) |
| goto out_free; |
| |
| buffer->rb_bc_srv_max_requests = reqs; |
| request_module("svcrdma"); |
| |
| return 0; |
| |
| out_free: |
| xprt_rdma_bc_destroy(xprt, reqs); |
| |
| out_err: |
| pr_err("RPC: %s: setup backchannel transport failed\n", __func__); |
| return -ENOMEM; |
| } |
| |
| /** |
| * xprt_rdma_bc_up - Create transport endpoint for backchannel service |
| * @serv: server endpoint |
| * @net: network namespace |
| * |
| * The "xprt" is an implied argument: it supplies the name of the |
| * backchannel transport class. |
| * |
| * Returns zero on success, negative errno on failure |
| */ |
| int xprt_rdma_bc_up(struct svc_serv *serv, struct net *net) |
| { |
| int ret; |
| |
| ret = svc_create_xprt(serv, "rdma-bc", net, PF_INET, 0, 0); |
| if (ret < 0) |
| return ret; |
| return 0; |
| } |
| |
| /** |
| * xprt_rdma_bc_maxpayload - Return maximum backchannel message size |
| * @xprt: transport |
| * |
| * Returns maximum size, in bytes, of a backchannel message |
| */ |
| size_t xprt_rdma_bc_maxpayload(struct rpc_xprt *xprt) |
| { |
| struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt); |
| struct rpcrdma_create_data_internal *cdata = &r_xprt->rx_data; |
| size_t maxmsg; |
| |
| maxmsg = min_t(unsigned int, cdata->inline_rsize, cdata->inline_wsize); |
| maxmsg = min_t(unsigned int, maxmsg, PAGE_SIZE); |
| return maxmsg - RPCRDMA_HDRLEN_MIN; |
| } |
| |
| /** |
| * rpcrdma_bc_marshal_reply - Send backwards direction reply |
| * @rqst: buffer containing RPC reply data |
| * |
| * Returns zero on success. |
| */ |
| int rpcrdma_bc_marshal_reply(struct rpc_rqst *rqst) |
| { |
| struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(rqst->rq_xprt); |
| struct rpcrdma_req *req = rpcr_to_rdmar(rqst); |
| __be32 *p; |
| |
| rpcrdma_set_xdrlen(&req->rl_hdrbuf, 0); |
| xdr_init_encode(&req->rl_stream, &req->rl_hdrbuf, |
| req->rl_rdmabuf->rg_base); |
| |
| p = xdr_reserve_space(&req->rl_stream, 28); |
| if (unlikely(!p)) |
| return -EIO; |
| *p++ = rqst->rq_xid; |
| *p++ = rpcrdma_version; |
| *p++ = cpu_to_be32(r_xprt->rx_buf.rb_bc_srv_max_requests); |
| *p++ = rdma_msg; |
| *p++ = xdr_zero; |
| *p++ = xdr_zero; |
| *p = xdr_zero; |
| |
| if (rpcrdma_prepare_send_sges(r_xprt, req, RPCRDMA_HDRLEN_MIN, |
| &rqst->rq_snd_buf, rpcrdma_noch)) |
| return -EIO; |
| return 0; |
| } |
| |
| /** |
| * xprt_rdma_bc_destroy - Release resources for handling backchannel requests |
| * @xprt: transport associated with these backchannel resources |
| * @reqs: number of incoming requests to destroy; ignored |
| */ |
| void xprt_rdma_bc_destroy(struct rpc_xprt *xprt, unsigned int reqs) |
| { |
| struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt); |
| struct rpc_rqst *rqst, *tmp; |
| |
| spin_lock_bh(&xprt->bc_pa_lock); |
| list_for_each_entry_safe(rqst, tmp, &xprt->bc_pa_list, rq_bc_pa_list) { |
| list_del(&rqst->rq_bc_pa_list); |
| spin_unlock_bh(&xprt->bc_pa_lock); |
| |
| rpcrdma_bc_free_rqst(r_xprt, rqst); |
| |
| spin_lock_bh(&xprt->bc_pa_lock); |
| } |
| spin_unlock_bh(&xprt->bc_pa_lock); |
| } |
| |
| /** |
| * xprt_rdma_bc_free_rqst - Release a backchannel rqst |
| * @rqst: request to release |
| */ |
| void xprt_rdma_bc_free_rqst(struct rpc_rqst *rqst) |
| { |
| struct rpc_xprt *xprt = rqst->rq_xprt; |
| |
| dprintk("RPC: %s: freeing rqst %p (req %p)\n", |
| __func__, rqst, rpcr_to_rdmar(rqst)); |
| |
| smp_mb__before_atomic(); |
| WARN_ON_ONCE(!test_bit(RPC_BC_PA_IN_USE, &rqst->rq_bc_pa_state)); |
| clear_bit(RPC_BC_PA_IN_USE, &rqst->rq_bc_pa_state); |
| smp_mb__after_atomic(); |
| |
| spin_lock_bh(&xprt->bc_pa_lock); |
| list_add_tail(&rqst->rq_bc_pa_list, &xprt->bc_pa_list); |
| spin_unlock_bh(&xprt->bc_pa_lock); |
| } |
| |
| /** |
| * rpcrdma_bc_receive_call - Handle a backward direction call |
| * @xprt: transport receiving the call |
| * @rep: receive buffer containing the call |
| * |
| * Operational assumptions: |
| * o Backchannel credits are ignored, just as the NFS server |
| * forechannel currently does |
| * o The ULP manages a replay cache (eg, NFSv4.1 sessions). |
| * No replay detection is done at the transport level |
| */ |
| void rpcrdma_bc_receive_call(struct rpcrdma_xprt *r_xprt, |
| struct rpcrdma_rep *rep) |
| { |
| struct rpc_xprt *xprt = &r_xprt->rx_xprt; |
| struct svc_serv *bc_serv; |
| struct rpcrdma_req *req; |
| struct rpc_rqst *rqst; |
| struct xdr_buf *buf; |
| size_t size; |
| __be32 *p; |
| |
| p = xdr_inline_decode(&rep->rr_stream, 0); |
| size = xdr_stream_remaining(&rep->rr_stream); |
| |
| #ifdef RPCRDMA_BACKCHANNEL_DEBUG |
| pr_info("RPC: %s: callback XID %08x, length=%u\n", |
| __func__, be32_to_cpup(p), size); |
| pr_info("RPC: %s: %*ph\n", __func__, size, p); |
| #endif |
| |
| /* Grab a free bc rqst */ |
| spin_lock(&xprt->bc_pa_lock); |
| if (list_empty(&xprt->bc_pa_list)) { |
| spin_unlock(&xprt->bc_pa_lock); |
| goto out_overflow; |
| } |
| rqst = list_first_entry(&xprt->bc_pa_list, |
| struct rpc_rqst, rq_bc_pa_list); |
| list_del(&rqst->rq_bc_pa_list); |
| spin_unlock(&xprt->bc_pa_lock); |
| dprintk("RPC: %s: using rqst %p\n", __func__, rqst); |
| |
| /* Prepare rqst */ |
| rqst->rq_reply_bytes_recvd = 0; |
| rqst->rq_bytes_sent = 0; |
| rqst->rq_xid = *p; |
| |
| rqst->rq_private_buf.len = size; |
| set_bit(RPC_BC_PA_IN_USE, &rqst->rq_bc_pa_state); |
| |
| buf = &rqst->rq_rcv_buf; |
| memset(buf, 0, sizeof(*buf)); |
| buf->head[0].iov_base = p; |
| buf->head[0].iov_len = size; |
| buf->len = size; |
| |
| /* The receive buffer has to be hooked to the rpcrdma_req |
| * so that it is not released while the req is pointing |
| * to its buffer, and so that it can be reposted after |
| * the Upper Layer is done decoding it. |
| */ |
| req = rpcr_to_rdmar(rqst); |
| dprintk("RPC: %s: attaching rep %p to req %p\n", |
| __func__, rep, req); |
| req->rl_reply = rep; |
| |
| /* Defeat the retransmit detection logic in send_request */ |
| req->rl_connect_cookie = 0; |
| |
| /* Queue rqst for ULP's callback service */ |
| bc_serv = xprt->bc_serv; |
| spin_lock(&bc_serv->sv_cb_lock); |
| list_add(&rqst->rq_bc_list, &bc_serv->sv_cb_list); |
| spin_unlock(&bc_serv->sv_cb_lock); |
| |
| wake_up(&bc_serv->sv_cb_waitq); |
| |
| r_xprt->rx_stats.bcall_count++; |
| return; |
| |
| out_overflow: |
| pr_warn("RPC/RDMA backchannel overflow\n"); |
| xprt_disconnect_done(xprt); |
| /* This receive buffer gets reposted automatically |
| * when the connection is re-established. |
| */ |
| return; |
| } |