| /* |
| * max77693.c - Regulator driver for the Maxim 77693 and 77843 |
| * |
| * Copyright (C) 2013-2015 Samsung Electronics |
| * Jonghwa Lee <jonghwa3.lee@samsung.com> |
| * Krzysztof Kozlowski <krzk@kernel.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * This driver is based on max77686.c |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/module.h> |
| #include <linux/export.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/mfd/max77693.h> |
| #include <linux/mfd/max77693-common.h> |
| #include <linux/mfd/max77693-private.h> |
| #include <linux/mfd/max77843-private.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/regmap.h> |
| |
| /* |
| * ID for MAX77843 regulators. |
| * There is no need for such for MAX77693. |
| */ |
| enum max77843_regulator_type { |
| MAX77843_SAFEOUT1 = 0, |
| MAX77843_SAFEOUT2, |
| MAX77843_CHARGER, |
| |
| MAX77843_NUM, |
| }; |
| |
| /* Register differences between chargers: MAX77693 and MAX77843 */ |
| struct chg_reg_data { |
| unsigned int linear_reg; |
| unsigned int linear_mask; |
| unsigned int uA_step; |
| unsigned int min_sel; |
| }; |
| |
| /* |
| * MAX77693 CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA |
| * 0x00, 0x01, 0x2, 0x03 = 60 mA |
| * 0x04 ~ 0x7E = (60 + (X - 3) * 20) mA |
| * Actually for MAX77693 the driver manipulates the maximum input current, |
| * not the fast charge current (output). This should be fixed. |
| * |
| * On MAX77843 the calculation formula is the same (except values). |
| * Fortunately it properly manipulates the fast charge current. |
| */ |
| static int max77693_chg_get_current_limit(struct regulator_dev *rdev) |
| { |
| const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev); |
| unsigned int chg_min_uA = rdev->constraints->min_uA; |
| unsigned int chg_max_uA = rdev->constraints->max_uA; |
| unsigned int reg, sel; |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(rdev->regmap, reg_data->linear_reg, ®); |
| if (ret < 0) |
| return ret; |
| |
| sel = reg & reg_data->linear_mask; |
| |
| /* the first four codes for charger current are all 60mA */ |
| if (sel <= reg_data->min_sel) |
| sel = 0; |
| else |
| sel -= reg_data->min_sel; |
| |
| val = chg_min_uA + reg_data->uA_step * sel; |
| if (val > chg_max_uA) |
| return -EINVAL; |
| |
| return val; |
| } |
| |
| static int max77693_chg_set_current_limit(struct regulator_dev *rdev, |
| int min_uA, int max_uA) |
| { |
| const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev); |
| unsigned int chg_min_uA = rdev->constraints->min_uA; |
| int sel = 0; |
| |
| while (chg_min_uA + reg_data->uA_step * sel < min_uA) |
| sel++; |
| |
| if (chg_min_uA + reg_data->uA_step * sel > max_uA) |
| return -EINVAL; |
| |
| /* the first four codes for charger current are all 60mA */ |
| sel += reg_data->min_sel; |
| |
| return regmap_write(rdev->regmap, reg_data->linear_reg, sel); |
| } |
| /* end of CHARGER regulator ops */ |
| |
| /* Returns regmap suitable for given regulator on chosen device */ |
| static struct regmap *max77693_get_regmap(enum max77693_types type, |
| struct max77693_dev *max77693, |
| int reg_id) |
| { |
| if (type == TYPE_MAX77693) |
| return max77693->regmap; |
| |
| /* Else: TYPE_MAX77843 */ |
| switch (reg_id) { |
| case MAX77843_SAFEOUT1: |
| case MAX77843_SAFEOUT2: |
| return max77693->regmap; |
| case MAX77843_CHARGER: |
| return max77693->regmap_chg; |
| default: |
| return max77693->regmap; |
| } |
| } |
| |
| static const unsigned int max77693_safeout_table[] = { |
| 4850000, |
| 4900000, |
| 4950000, |
| 3300000, |
| }; |
| |
| static const struct regulator_ops max77693_safeout_ops = { |
| .list_voltage = regulator_list_voltage_table, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| }; |
| |
| static struct regulator_ops max77693_charger_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_current_limit = max77693_chg_get_current_limit, |
| .set_current_limit = max77693_chg_set_current_limit, |
| }; |
| |
| #define max77693_regulator_desc_esafeout(_num) { \ |
| .name = "ESAFEOUT"#_num, \ |
| .id = MAX77693_ESAFEOUT##_num, \ |
| .of_match = of_match_ptr("ESAFEOUT"#_num), \ |
| .regulators_node = of_match_ptr("regulators"), \ |
| .n_voltages = 4, \ |
| .ops = &max77693_safeout_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .volt_table = max77693_safeout_table, \ |
| .vsel_reg = MAX77693_CHG_REG_SAFEOUT_CTRL, \ |
| .vsel_mask = SAFEOUT_CTRL_SAFEOUT##_num##_MASK, \ |
| .enable_reg = MAX77693_CHG_REG_SAFEOUT_CTRL, \ |
| .enable_mask = SAFEOUT_CTRL_ENSAFEOUT##_num##_MASK , \ |
| } |
| |
| static const struct regulator_desc max77693_supported_regulators[] = { |
| max77693_regulator_desc_esafeout(1), |
| max77693_regulator_desc_esafeout(2), |
| { |
| .name = "CHARGER", |
| .id = MAX77693_CHARGER, |
| .of_match = of_match_ptr("CHARGER"), |
| .regulators_node = of_match_ptr("regulators"), |
| .ops = &max77693_charger_ops, |
| .type = REGULATOR_CURRENT, |
| .owner = THIS_MODULE, |
| .enable_reg = MAX77693_CHG_REG_CHG_CNFG_00, |
| .enable_mask = CHG_CNFG_00_CHG_MASK | |
| CHG_CNFG_00_BUCK_MASK, |
| .enable_val = CHG_CNFG_00_CHG_MASK | CHG_CNFG_00_BUCK_MASK, |
| }, |
| }; |
| |
| static const struct chg_reg_data max77693_chg_reg_data = { |
| .linear_reg = MAX77693_CHG_REG_CHG_CNFG_09, |
| .linear_mask = CHG_CNFG_09_CHGIN_ILIM_MASK, |
| .uA_step = 20000, |
| .min_sel = 3, |
| }; |
| |
| #define max77843_regulator_desc_esafeout(num) { \ |
| .name = "SAFEOUT" # num, \ |
| .id = MAX77843_SAFEOUT ## num, \ |
| .ops = &max77693_safeout_ops, \ |
| .of_match = of_match_ptr("SAFEOUT" # num), \ |
| .regulators_node = of_match_ptr("regulators"), \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .n_voltages = ARRAY_SIZE(max77693_safeout_table), \ |
| .volt_table = max77693_safeout_table, \ |
| .enable_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \ |
| .enable_mask = MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT ## num, \ |
| .vsel_reg = MAX77843_SYS_REG_SAFEOUTCTRL, \ |
| .vsel_mask = MAX77843_REG_SAFEOUTCTRL_SAFEOUT ## num ## _MASK, \ |
| } |
| |
| static const struct regulator_desc max77843_supported_regulators[] = { |
| [MAX77843_SAFEOUT1] = max77843_regulator_desc_esafeout(1), |
| [MAX77843_SAFEOUT2] = max77843_regulator_desc_esafeout(2), |
| [MAX77843_CHARGER] = { |
| .name = "CHARGER", |
| .id = MAX77843_CHARGER, |
| .ops = &max77693_charger_ops, |
| .of_match = of_match_ptr("CHARGER"), |
| .regulators_node = of_match_ptr("regulators"), |
| .type = REGULATOR_CURRENT, |
| .owner = THIS_MODULE, |
| .enable_reg = MAX77843_CHG_REG_CHG_CNFG_00, |
| .enable_mask = MAX77843_CHG_MASK, |
| .enable_val = MAX77843_CHG_MASK, |
| }, |
| }; |
| |
| static const struct chg_reg_data max77843_chg_reg_data = { |
| .linear_reg = MAX77843_CHG_REG_CHG_CNFG_02, |
| .linear_mask = MAX77843_CHG_FAST_CHG_CURRENT_MASK, |
| .uA_step = MAX77843_CHG_FAST_CHG_CURRENT_STEP, |
| .min_sel = 2, |
| }; |
| |
| static int max77693_pmic_probe(struct platform_device *pdev) |
| { |
| enum max77693_types type = platform_get_device_id(pdev)->driver_data; |
| struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent); |
| const struct regulator_desc *regulators; |
| unsigned int regulators_size; |
| int i; |
| struct regulator_config config = { }; |
| |
| config.dev = iodev->dev; |
| |
| switch (type) { |
| case TYPE_MAX77693: |
| regulators = max77693_supported_regulators; |
| regulators_size = ARRAY_SIZE(max77693_supported_regulators); |
| config.driver_data = (void *)&max77693_chg_reg_data; |
| break; |
| case TYPE_MAX77843: |
| regulators = max77843_supported_regulators; |
| regulators_size = ARRAY_SIZE(max77843_supported_regulators); |
| config.driver_data = (void *)&max77843_chg_reg_data; |
| break; |
| default: |
| dev_err(&pdev->dev, "Unsupported device type: %u\n", type); |
| return -ENODEV; |
| } |
| |
| for (i = 0; i < regulators_size; i++) { |
| struct regulator_dev *rdev; |
| |
| config.regmap = max77693_get_regmap(type, iodev, |
| regulators[i].id); |
| |
| rdev = devm_regulator_register(&pdev->dev, |
| ®ulators[i], &config); |
| if (IS_ERR(rdev)) { |
| dev_err(&pdev->dev, |
| "Failed to initialize regulator-%d\n", i); |
| return PTR_ERR(rdev); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id max77693_pmic_id[] = { |
| { "max77693-pmic", TYPE_MAX77693 }, |
| { "max77843-regulator", TYPE_MAX77843 }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(platform, max77693_pmic_id); |
| |
| static struct platform_driver max77693_pmic_driver = { |
| .driver = { |
| .name = "max77693-pmic", |
| }, |
| .probe = max77693_pmic_probe, |
| .id_table = max77693_pmic_id, |
| }; |
| |
| static int __init max77693_pmic_init(void) |
| { |
| return platform_driver_register(&max77693_pmic_driver); |
| } |
| subsys_initcall(max77693_pmic_init); |
| |
| static void __exit max77693_pmic_cleanup(void) |
| { |
| platform_driver_unregister(&max77693_pmic_driver); |
| } |
| module_exit(max77693_pmic_cleanup); |
| |
| MODULE_DESCRIPTION("MAXIM 77693/77843 regulator driver"); |
| MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>"); |
| MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>"); |
| MODULE_LICENSE("GPL"); |