| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright(c) 2013 - 2018 Intel Corporation. */ |
| |
| #include "i40evf.h" |
| #include "i40e_prototype.h" |
| #include "i40evf_client.h" |
| |
| /* busy wait delay in msec */ |
| #define I40EVF_BUSY_WAIT_DELAY 10 |
| #define I40EVF_BUSY_WAIT_COUNT 50 |
| |
| /** |
| * i40evf_send_pf_msg |
| * @adapter: adapter structure |
| * @op: virtual channel opcode |
| * @msg: pointer to message buffer |
| * @len: message length |
| * |
| * Send message to PF and print status if failure. |
| **/ |
| static int i40evf_send_pf_msg(struct i40evf_adapter *adapter, |
| enum virtchnl_ops op, u8 *msg, u16 len) |
| { |
| struct i40e_hw *hw = &adapter->hw; |
| i40e_status err; |
| |
| if (adapter->flags & I40EVF_FLAG_PF_COMMS_FAILED) |
| return 0; /* nothing to see here, move along */ |
| |
| err = i40e_aq_send_msg_to_pf(hw, op, 0, msg, len, NULL); |
| if (err) |
| dev_dbg(&adapter->pdev->dev, "Unable to send opcode %d to PF, err %s, aq_err %s\n", |
| op, i40evf_stat_str(hw, err), |
| i40evf_aq_str(hw, hw->aq.asq_last_status)); |
| return err; |
| } |
| |
| /** |
| * i40evf_send_api_ver |
| * @adapter: adapter structure |
| * |
| * Send API version admin queue message to the PF. The reply is not checked |
| * in this function. Returns 0 if the message was successfully |
| * sent, or one of the I40E_ADMIN_QUEUE_ERROR_ statuses if not. |
| **/ |
| int i40evf_send_api_ver(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_version_info vvi; |
| |
| vvi.major = VIRTCHNL_VERSION_MAJOR; |
| vvi.minor = VIRTCHNL_VERSION_MINOR; |
| |
| return i40evf_send_pf_msg(adapter, VIRTCHNL_OP_VERSION, (u8 *)&vvi, |
| sizeof(vvi)); |
| } |
| |
| /** |
| * i40evf_verify_api_ver |
| * @adapter: adapter structure |
| * |
| * Compare API versions with the PF. Must be called after admin queue is |
| * initialized. Returns 0 if API versions match, -EIO if they do not, |
| * I40E_ERR_ADMIN_QUEUE_NO_WORK if the admin queue is empty, and any errors |
| * from the firmware are propagated. |
| **/ |
| int i40evf_verify_api_ver(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_version_info *pf_vvi; |
| struct i40e_hw *hw = &adapter->hw; |
| struct i40e_arq_event_info event; |
| enum virtchnl_ops op; |
| i40e_status err; |
| |
| event.buf_len = I40EVF_MAX_AQ_BUF_SIZE; |
| event.msg_buf = kzalloc(event.buf_len, GFP_KERNEL); |
| if (!event.msg_buf) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| while (1) { |
| err = i40evf_clean_arq_element(hw, &event, NULL); |
| /* When the AQ is empty, i40evf_clean_arq_element will return |
| * nonzero and this loop will terminate. |
| */ |
| if (err) |
| goto out_alloc; |
| op = |
| (enum virtchnl_ops)le32_to_cpu(event.desc.cookie_high); |
| if (op == VIRTCHNL_OP_VERSION) |
| break; |
| } |
| |
| |
| err = (i40e_status)le32_to_cpu(event.desc.cookie_low); |
| if (err) |
| goto out_alloc; |
| |
| if (op != VIRTCHNL_OP_VERSION) { |
| dev_info(&adapter->pdev->dev, "Invalid reply type %d from PF\n", |
| op); |
| err = -EIO; |
| goto out_alloc; |
| } |
| |
| pf_vvi = (struct virtchnl_version_info *)event.msg_buf; |
| adapter->pf_version = *pf_vvi; |
| |
| if ((pf_vvi->major > VIRTCHNL_VERSION_MAJOR) || |
| ((pf_vvi->major == VIRTCHNL_VERSION_MAJOR) && |
| (pf_vvi->minor > VIRTCHNL_VERSION_MINOR))) |
| err = -EIO; |
| |
| out_alloc: |
| kfree(event.msg_buf); |
| out: |
| return err; |
| } |
| |
| /** |
| * i40evf_send_vf_config_msg |
| * @adapter: adapter structure |
| * |
| * Send VF configuration request admin queue message to the PF. The reply |
| * is not checked in this function. Returns 0 if the message was |
| * successfully sent, or one of the I40E_ADMIN_QUEUE_ERROR_ statuses if not. |
| **/ |
| int i40evf_send_vf_config_msg(struct i40evf_adapter *adapter) |
| { |
| u32 caps; |
| |
| caps = VIRTCHNL_VF_OFFLOAD_L2 | |
| VIRTCHNL_VF_OFFLOAD_RSS_PF | |
| VIRTCHNL_VF_OFFLOAD_RSS_AQ | |
| VIRTCHNL_VF_OFFLOAD_RSS_REG | |
| VIRTCHNL_VF_OFFLOAD_VLAN | |
| VIRTCHNL_VF_OFFLOAD_WB_ON_ITR | |
| VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 | |
| VIRTCHNL_VF_OFFLOAD_ENCAP | |
| VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM | |
| VIRTCHNL_VF_OFFLOAD_REQ_QUEUES | |
| VIRTCHNL_VF_OFFLOAD_ADQ; |
| |
| adapter->current_op = VIRTCHNL_OP_GET_VF_RESOURCES; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_GET_CONFIG; |
| if (PF_IS_V11(adapter)) |
| return i40evf_send_pf_msg(adapter, |
| VIRTCHNL_OP_GET_VF_RESOURCES, |
| (u8 *)&caps, sizeof(caps)); |
| else |
| return i40evf_send_pf_msg(adapter, |
| VIRTCHNL_OP_GET_VF_RESOURCES, |
| NULL, 0); |
| } |
| |
| /** |
| * i40evf_validate_num_queues |
| * @adapter: adapter structure |
| * |
| * Validate that the number of queues the PF has sent in |
| * VIRTCHNL_OP_GET_VF_RESOURCES is not larger than the VF can handle. |
| **/ |
| static void i40evf_validate_num_queues(struct i40evf_adapter *adapter) |
| { |
| if (adapter->vf_res->num_queue_pairs > I40EVF_MAX_REQ_QUEUES) { |
| struct virtchnl_vsi_resource *vsi_res; |
| int i; |
| |
| dev_info(&adapter->pdev->dev, "Received %d queues, but can only have a max of %d\n", |
| adapter->vf_res->num_queue_pairs, |
| I40EVF_MAX_REQ_QUEUES); |
| dev_info(&adapter->pdev->dev, "Fixing by reducing queues to %d\n", |
| I40EVF_MAX_REQ_QUEUES); |
| adapter->vf_res->num_queue_pairs = I40EVF_MAX_REQ_QUEUES; |
| for (i = 0; i < adapter->vf_res->num_vsis; i++) { |
| vsi_res = &adapter->vf_res->vsi_res[i]; |
| vsi_res->num_queue_pairs = I40EVF_MAX_REQ_QUEUES; |
| } |
| } |
| } |
| |
| /** |
| * i40evf_get_vf_config |
| * @adapter: private adapter structure |
| * |
| * Get VF configuration from PF and populate hw structure. Must be called after |
| * admin queue is initialized. Busy waits until response is received from PF, |
| * with maximum timeout. Response from PF is returned in the buffer for further |
| * processing by the caller. |
| **/ |
| int i40evf_get_vf_config(struct i40evf_adapter *adapter) |
| { |
| struct i40e_hw *hw = &adapter->hw; |
| struct i40e_arq_event_info event; |
| enum virtchnl_ops op; |
| i40e_status err; |
| u16 len; |
| |
| len = sizeof(struct virtchnl_vf_resource) + |
| I40E_MAX_VF_VSI * sizeof(struct virtchnl_vsi_resource); |
| event.buf_len = len; |
| event.msg_buf = kzalloc(event.buf_len, GFP_KERNEL); |
| if (!event.msg_buf) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| while (1) { |
| /* When the AQ is empty, i40evf_clean_arq_element will return |
| * nonzero and this loop will terminate. |
| */ |
| err = i40evf_clean_arq_element(hw, &event, NULL); |
| if (err) |
| goto out_alloc; |
| op = |
| (enum virtchnl_ops)le32_to_cpu(event.desc.cookie_high); |
| if (op == VIRTCHNL_OP_GET_VF_RESOURCES) |
| break; |
| } |
| |
| err = (i40e_status)le32_to_cpu(event.desc.cookie_low); |
| memcpy(adapter->vf_res, event.msg_buf, min(event.msg_len, len)); |
| |
| /* some PFs send more queues than we should have so validate that |
| * we aren't getting too many queues |
| */ |
| if (!err) |
| i40evf_validate_num_queues(adapter); |
| i40e_vf_parse_hw_config(hw, adapter->vf_res); |
| out_alloc: |
| kfree(event.msg_buf); |
| out: |
| return err; |
| } |
| |
| /** |
| * i40evf_configure_queues |
| * @adapter: adapter structure |
| * |
| * Request that the PF set up our (previously allocated) queues. |
| **/ |
| void i40evf_configure_queues(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_vsi_queue_config_info *vqci; |
| struct virtchnl_queue_pair_info *vqpi; |
| int pairs = adapter->num_active_queues; |
| int i, len, max_frame = I40E_MAX_RXBUFFER; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot configure queues, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_CONFIG_VSI_QUEUES; |
| len = sizeof(struct virtchnl_vsi_queue_config_info) + |
| (sizeof(struct virtchnl_queue_pair_info) * pairs); |
| vqci = kzalloc(len, GFP_KERNEL); |
| if (!vqci) |
| return; |
| |
| /* Limit maximum frame size when jumbo frames is not enabled */ |
| if (!(adapter->flags & I40EVF_FLAG_LEGACY_RX) && |
| (adapter->netdev->mtu <= ETH_DATA_LEN)) |
| max_frame = I40E_RXBUFFER_1536 - NET_IP_ALIGN; |
| |
| vqci->vsi_id = adapter->vsi_res->vsi_id; |
| vqci->num_queue_pairs = pairs; |
| vqpi = vqci->qpair; |
| /* Size check is not needed here - HW max is 16 queue pairs, and we |
| * can fit info for 31 of them into the AQ buffer before it overflows. |
| */ |
| for (i = 0; i < pairs; i++) { |
| vqpi->txq.vsi_id = vqci->vsi_id; |
| vqpi->txq.queue_id = i; |
| vqpi->txq.ring_len = adapter->tx_rings[i].count; |
| vqpi->txq.dma_ring_addr = adapter->tx_rings[i].dma; |
| vqpi->rxq.vsi_id = vqci->vsi_id; |
| vqpi->rxq.queue_id = i; |
| vqpi->rxq.ring_len = adapter->rx_rings[i].count; |
| vqpi->rxq.dma_ring_addr = adapter->rx_rings[i].dma; |
| vqpi->rxq.max_pkt_size = max_frame; |
| vqpi->rxq.databuffer_size = |
| ALIGN(adapter->rx_rings[i].rx_buf_len, |
| BIT_ULL(I40E_RXQ_CTX_DBUFF_SHIFT)); |
| vqpi++; |
| } |
| |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_CONFIGURE_QUEUES; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_CONFIG_VSI_QUEUES, |
| (u8 *)vqci, len); |
| kfree(vqci); |
| } |
| |
| /** |
| * i40evf_enable_queues |
| * @adapter: adapter structure |
| * |
| * Request that the PF enable all of our queues. |
| **/ |
| void i40evf_enable_queues(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_queue_select vqs; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot enable queues, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_ENABLE_QUEUES; |
| vqs.vsi_id = adapter->vsi_res->vsi_id; |
| vqs.tx_queues = BIT(adapter->num_active_queues) - 1; |
| vqs.rx_queues = vqs.tx_queues; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_ENABLE_QUEUES; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_ENABLE_QUEUES, |
| (u8 *)&vqs, sizeof(vqs)); |
| } |
| |
| /** |
| * i40evf_disable_queues |
| * @adapter: adapter structure |
| * |
| * Request that the PF disable all of our queues. |
| **/ |
| void i40evf_disable_queues(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_queue_select vqs; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot disable queues, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_DISABLE_QUEUES; |
| vqs.vsi_id = adapter->vsi_res->vsi_id; |
| vqs.tx_queues = BIT(adapter->num_active_queues) - 1; |
| vqs.rx_queues = vqs.tx_queues; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_DISABLE_QUEUES; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_DISABLE_QUEUES, |
| (u8 *)&vqs, sizeof(vqs)); |
| } |
| |
| /** |
| * i40evf_map_queues |
| * @adapter: adapter structure |
| * |
| * Request that the PF map queues to interrupt vectors. Misc causes, including |
| * admin queue, are always mapped to vector 0. |
| **/ |
| void i40evf_map_queues(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_irq_map_info *vimi; |
| struct virtchnl_vector_map *vecmap; |
| int v_idx, q_vectors, len; |
| struct i40e_q_vector *q_vector; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot map queues to vectors, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_CONFIG_IRQ_MAP; |
| |
| q_vectors = adapter->num_msix_vectors - NONQ_VECS; |
| |
| len = sizeof(struct virtchnl_irq_map_info) + |
| (adapter->num_msix_vectors * |
| sizeof(struct virtchnl_vector_map)); |
| vimi = kzalloc(len, GFP_KERNEL); |
| if (!vimi) |
| return; |
| |
| vimi->num_vectors = adapter->num_msix_vectors; |
| /* Queue vectors first */ |
| for (v_idx = 0; v_idx < q_vectors; v_idx++) { |
| q_vector = &adapter->q_vectors[v_idx]; |
| vecmap = &vimi->vecmap[v_idx]; |
| |
| vecmap->vsi_id = adapter->vsi_res->vsi_id; |
| vecmap->vector_id = v_idx + NONQ_VECS; |
| vecmap->txq_map = q_vector->ring_mask; |
| vecmap->rxq_map = q_vector->ring_mask; |
| vecmap->rxitr_idx = I40E_RX_ITR; |
| vecmap->txitr_idx = I40E_TX_ITR; |
| } |
| /* Misc vector last - this is only for AdminQ messages */ |
| vecmap = &vimi->vecmap[v_idx]; |
| vecmap->vsi_id = adapter->vsi_res->vsi_id; |
| vecmap->vector_id = 0; |
| vecmap->txq_map = 0; |
| vecmap->rxq_map = 0; |
| |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_MAP_VECTORS; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_CONFIG_IRQ_MAP, |
| (u8 *)vimi, len); |
| kfree(vimi); |
| } |
| |
| /** |
| * i40evf_request_queues |
| * @adapter: adapter structure |
| * @num: number of requested queues |
| * |
| * We get a default number of queues from the PF. This enables us to request a |
| * different number. Returns 0 on success, negative on failure |
| **/ |
| int i40evf_request_queues(struct i40evf_adapter *adapter, int num) |
| { |
| struct virtchnl_vf_res_request vfres; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot request queues, command %d pending\n", |
| adapter->current_op); |
| return -EBUSY; |
| } |
| |
| vfres.num_queue_pairs = num; |
| |
| adapter->current_op = VIRTCHNL_OP_REQUEST_QUEUES; |
| adapter->flags |= I40EVF_FLAG_REINIT_ITR_NEEDED; |
| return i40evf_send_pf_msg(adapter, VIRTCHNL_OP_REQUEST_QUEUES, |
| (u8 *)&vfres, sizeof(vfres)); |
| } |
| |
| /** |
| * i40evf_add_ether_addrs |
| * @adapter: adapter structure |
| * |
| * Request that the PF add one or more addresses to our filters. |
| **/ |
| void i40evf_add_ether_addrs(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_ether_addr_list *veal; |
| int len, i = 0, count = 0; |
| struct i40evf_mac_filter *f; |
| bool more = false; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot add filters, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| |
| spin_lock_bh(&adapter->mac_vlan_list_lock); |
| |
| list_for_each_entry(f, &adapter->mac_filter_list, list) { |
| if (f->add) |
| count++; |
| } |
| if (!count) { |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_ADD_MAC_FILTER; |
| spin_unlock_bh(&adapter->mac_vlan_list_lock); |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_ADD_ETH_ADDR; |
| |
| len = sizeof(struct virtchnl_ether_addr_list) + |
| (count * sizeof(struct virtchnl_ether_addr)); |
| if (len > I40EVF_MAX_AQ_BUF_SIZE) { |
| dev_warn(&adapter->pdev->dev, "Too many add MAC changes in one request\n"); |
| count = (I40EVF_MAX_AQ_BUF_SIZE - |
| sizeof(struct virtchnl_ether_addr_list)) / |
| sizeof(struct virtchnl_ether_addr); |
| len = sizeof(struct virtchnl_ether_addr_list) + |
| (count * sizeof(struct virtchnl_ether_addr)); |
| more = true; |
| } |
| |
| veal = kzalloc(len, GFP_ATOMIC); |
| if (!veal) { |
| spin_unlock_bh(&adapter->mac_vlan_list_lock); |
| return; |
| } |
| |
| veal->vsi_id = adapter->vsi_res->vsi_id; |
| veal->num_elements = count; |
| list_for_each_entry(f, &adapter->mac_filter_list, list) { |
| if (f->add) { |
| ether_addr_copy(veal->list[i].addr, f->macaddr); |
| i++; |
| f->add = false; |
| if (i == count) |
| break; |
| } |
| } |
| if (!more) |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_ADD_MAC_FILTER; |
| |
| spin_unlock_bh(&adapter->mac_vlan_list_lock); |
| |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_ADD_ETH_ADDR, |
| (u8 *)veal, len); |
| kfree(veal); |
| } |
| |
| /** |
| * i40evf_del_ether_addrs |
| * @adapter: adapter structure |
| * |
| * Request that the PF remove one or more addresses from our filters. |
| **/ |
| void i40evf_del_ether_addrs(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_ether_addr_list *veal; |
| struct i40evf_mac_filter *f, *ftmp; |
| int len, i = 0, count = 0; |
| bool more = false; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot remove filters, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| |
| spin_lock_bh(&adapter->mac_vlan_list_lock); |
| |
| list_for_each_entry(f, &adapter->mac_filter_list, list) { |
| if (f->remove) |
| count++; |
| } |
| if (!count) { |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_DEL_MAC_FILTER; |
| spin_unlock_bh(&adapter->mac_vlan_list_lock); |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_DEL_ETH_ADDR; |
| |
| len = sizeof(struct virtchnl_ether_addr_list) + |
| (count * sizeof(struct virtchnl_ether_addr)); |
| if (len > I40EVF_MAX_AQ_BUF_SIZE) { |
| dev_warn(&adapter->pdev->dev, "Too many delete MAC changes in one request\n"); |
| count = (I40EVF_MAX_AQ_BUF_SIZE - |
| sizeof(struct virtchnl_ether_addr_list)) / |
| sizeof(struct virtchnl_ether_addr); |
| len = sizeof(struct virtchnl_ether_addr_list) + |
| (count * sizeof(struct virtchnl_ether_addr)); |
| more = true; |
| } |
| veal = kzalloc(len, GFP_ATOMIC); |
| if (!veal) { |
| spin_unlock_bh(&adapter->mac_vlan_list_lock); |
| return; |
| } |
| |
| veal->vsi_id = adapter->vsi_res->vsi_id; |
| veal->num_elements = count; |
| list_for_each_entry_safe(f, ftmp, &adapter->mac_filter_list, list) { |
| if (f->remove) { |
| ether_addr_copy(veal->list[i].addr, f->macaddr); |
| i++; |
| list_del(&f->list); |
| kfree(f); |
| if (i == count) |
| break; |
| } |
| } |
| if (!more) |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_DEL_MAC_FILTER; |
| |
| spin_unlock_bh(&adapter->mac_vlan_list_lock); |
| |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_DEL_ETH_ADDR, |
| (u8 *)veal, len); |
| kfree(veal); |
| } |
| |
| /** |
| * i40evf_add_vlans |
| * @adapter: adapter structure |
| * |
| * Request that the PF add one or more VLAN filters to our VSI. |
| **/ |
| void i40evf_add_vlans(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_vlan_filter_list *vvfl; |
| int len, i = 0, count = 0; |
| struct i40evf_vlan_filter *f; |
| bool more = false; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot add VLANs, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| |
| spin_lock_bh(&adapter->mac_vlan_list_lock); |
| |
| list_for_each_entry(f, &adapter->vlan_filter_list, list) { |
| if (f->add) |
| count++; |
| } |
| if (!count) { |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_ADD_VLAN_FILTER; |
| spin_unlock_bh(&adapter->mac_vlan_list_lock); |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_ADD_VLAN; |
| |
| len = sizeof(struct virtchnl_vlan_filter_list) + |
| (count * sizeof(u16)); |
| if (len > I40EVF_MAX_AQ_BUF_SIZE) { |
| dev_warn(&adapter->pdev->dev, "Too many add VLAN changes in one request\n"); |
| count = (I40EVF_MAX_AQ_BUF_SIZE - |
| sizeof(struct virtchnl_vlan_filter_list)) / |
| sizeof(u16); |
| len = sizeof(struct virtchnl_vlan_filter_list) + |
| (count * sizeof(u16)); |
| more = true; |
| } |
| vvfl = kzalloc(len, GFP_ATOMIC); |
| if (!vvfl) { |
| spin_unlock_bh(&adapter->mac_vlan_list_lock); |
| return; |
| } |
| |
| vvfl->vsi_id = adapter->vsi_res->vsi_id; |
| vvfl->num_elements = count; |
| list_for_each_entry(f, &adapter->vlan_filter_list, list) { |
| if (f->add) { |
| vvfl->vlan_id[i] = f->vlan; |
| i++; |
| f->add = false; |
| if (i == count) |
| break; |
| } |
| } |
| if (!more) |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_ADD_VLAN_FILTER; |
| |
| spin_unlock_bh(&adapter->mac_vlan_list_lock); |
| |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_ADD_VLAN, (u8 *)vvfl, len); |
| kfree(vvfl); |
| } |
| |
| /** |
| * i40evf_del_vlans |
| * @adapter: adapter structure |
| * |
| * Request that the PF remove one or more VLAN filters from our VSI. |
| **/ |
| void i40evf_del_vlans(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_vlan_filter_list *vvfl; |
| struct i40evf_vlan_filter *f, *ftmp; |
| int len, i = 0, count = 0; |
| bool more = false; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot remove VLANs, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| |
| spin_lock_bh(&adapter->mac_vlan_list_lock); |
| |
| list_for_each_entry(f, &adapter->vlan_filter_list, list) { |
| if (f->remove) |
| count++; |
| } |
| if (!count) { |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_DEL_VLAN_FILTER; |
| spin_unlock_bh(&adapter->mac_vlan_list_lock); |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_DEL_VLAN; |
| |
| len = sizeof(struct virtchnl_vlan_filter_list) + |
| (count * sizeof(u16)); |
| if (len > I40EVF_MAX_AQ_BUF_SIZE) { |
| dev_warn(&adapter->pdev->dev, "Too many delete VLAN changes in one request\n"); |
| count = (I40EVF_MAX_AQ_BUF_SIZE - |
| sizeof(struct virtchnl_vlan_filter_list)) / |
| sizeof(u16); |
| len = sizeof(struct virtchnl_vlan_filter_list) + |
| (count * sizeof(u16)); |
| more = true; |
| } |
| vvfl = kzalloc(len, GFP_ATOMIC); |
| if (!vvfl) { |
| spin_unlock_bh(&adapter->mac_vlan_list_lock); |
| return; |
| } |
| |
| vvfl->vsi_id = adapter->vsi_res->vsi_id; |
| vvfl->num_elements = count; |
| list_for_each_entry_safe(f, ftmp, &adapter->vlan_filter_list, list) { |
| if (f->remove) { |
| vvfl->vlan_id[i] = f->vlan; |
| i++; |
| list_del(&f->list); |
| kfree(f); |
| if (i == count) |
| break; |
| } |
| } |
| if (!more) |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_DEL_VLAN_FILTER; |
| |
| spin_unlock_bh(&adapter->mac_vlan_list_lock); |
| |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_DEL_VLAN, (u8 *)vvfl, len); |
| kfree(vvfl); |
| } |
| |
| /** |
| * i40evf_set_promiscuous |
| * @adapter: adapter structure |
| * @flags: bitmask to control unicast/multicast promiscuous. |
| * |
| * Request that the PF enable promiscuous mode for our VSI. |
| **/ |
| void i40evf_set_promiscuous(struct i40evf_adapter *adapter, int flags) |
| { |
| struct virtchnl_promisc_info vpi; |
| int promisc_all; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot set promiscuous mode, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| |
| promisc_all = FLAG_VF_UNICAST_PROMISC | |
| FLAG_VF_MULTICAST_PROMISC; |
| if ((flags & promisc_all) == promisc_all) { |
| adapter->flags |= I40EVF_FLAG_PROMISC_ON; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_REQUEST_PROMISC; |
| dev_info(&adapter->pdev->dev, "Entering promiscuous mode\n"); |
| } |
| |
| if (flags & FLAG_VF_MULTICAST_PROMISC) { |
| adapter->flags |= I40EVF_FLAG_ALLMULTI_ON; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_REQUEST_ALLMULTI; |
| dev_info(&adapter->pdev->dev, "Entering multicast promiscuous mode\n"); |
| } |
| |
| if (!flags) { |
| adapter->flags &= ~(I40EVF_FLAG_PROMISC_ON | |
| I40EVF_FLAG_ALLMULTI_ON); |
| adapter->aq_required &= ~(I40EVF_FLAG_AQ_RELEASE_PROMISC | |
| I40EVF_FLAG_AQ_RELEASE_ALLMULTI); |
| dev_info(&adapter->pdev->dev, "Leaving promiscuous mode\n"); |
| } |
| |
| adapter->current_op = VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE; |
| vpi.vsi_id = adapter->vsi_res->vsi_id; |
| vpi.flags = flags; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE, |
| (u8 *)&vpi, sizeof(vpi)); |
| } |
| |
| /** |
| * i40evf_request_stats |
| * @adapter: adapter structure |
| * |
| * Request VSI statistics from PF. |
| **/ |
| void i40evf_request_stats(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_queue_select vqs; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* no error message, this isn't crucial */ |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_GET_STATS; |
| vqs.vsi_id = adapter->vsi_res->vsi_id; |
| /* queue maps are ignored for this message - only the vsi is used */ |
| if (i40evf_send_pf_msg(adapter, VIRTCHNL_OP_GET_STATS, |
| (u8 *)&vqs, sizeof(vqs))) |
| /* if the request failed, don't lock out others */ |
| adapter->current_op = VIRTCHNL_OP_UNKNOWN; |
| } |
| |
| /** |
| * i40evf_get_hena |
| * @adapter: adapter structure |
| * |
| * Request hash enable capabilities from PF |
| **/ |
| void i40evf_get_hena(struct i40evf_adapter *adapter) |
| { |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot get RSS hash capabilities, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_GET_RSS_HENA_CAPS; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_GET_HENA; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_GET_RSS_HENA_CAPS, |
| NULL, 0); |
| } |
| |
| /** |
| * i40evf_set_hena |
| * @adapter: adapter structure |
| * |
| * Request the PF to set our RSS hash capabilities |
| **/ |
| void i40evf_set_hena(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_rss_hena vrh; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot set RSS hash enable, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| vrh.hena = adapter->hena; |
| adapter->current_op = VIRTCHNL_OP_SET_RSS_HENA; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_SET_HENA; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_SET_RSS_HENA, |
| (u8 *)&vrh, sizeof(vrh)); |
| } |
| |
| /** |
| * i40evf_set_rss_key |
| * @adapter: adapter structure |
| * |
| * Request the PF to set our RSS hash key |
| **/ |
| void i40evf_set_rss_key(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_rss_key *vrk; |
| int len; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot set RSS key, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| len = sizeof(struct virtchnl_rss_key) + |
| (adapter->rss_key_size * sizeof(u8)) - 1; |
| vrk = kzalloc(len, GFP_KERNEL); |
| if (!vrk) |
| return; |
| vrk->vsi_id = adapter->vsi.id; |
| vrk->key_len = adapter->rss_key_size; |
| memcpy(vrk->key, adapter->rss_key, adapter->rss_key_size); |
| |
| adapter->current_op = VIRTCHNL_OP_CONFIG_RSS_KEY; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_SET_RSS_KEY; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_CONFIG_RSS_KEY, |
| (u8 *)vrk, len); |
| kfree(vrk); |
| } |
| |
| /** |
| * i40evf_set_rss_lut |
| * @adapter: adapter structure |
| * |
| * Request the PF to set our RSS lookup table |
| **/ |
| void i40evf_set_rss_lut(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_rss_lut *vrl; |
| int len; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot set RSS LUT, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| len = sizeof(struct virtchnl_rss_lut) + |
| (adapter->rss_lut_size * sizeof(u8)) - 1; |
| vrl = kzalloc(len, GFP_KERNEL); |
| if (!vrl) |
| return; |
| vrl->vsi_id = adapter->vsi.id; |
| vrl->lut_entries = adapter->rss_lut_size; |
| memcpy(vrl->lut, adapter->rss_lut, adapter->rss_lut_size); |
| adapter->current_op = VIRTCHNL_OP_CONFIG_RSS_LUT; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_SET_RSS_LUT; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_CONFIG_RSS_LUT, |
| (u8 *)vrl, len); |
| kfree(vrl); |
| } |
| |
| /** |
| * i40evf_enable_vlan_stripping |
| * @adapter: adapter structure |
| * |
| * Request VLAN header stripping to be enabled |
| **/ |
| void i40evf_enable_vlan_stripping(struct i40evf_adapter *adapter) |
| { |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot enable stripping, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_ENABLE_VLAN_STRIPPING; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_ENABLE_VLAN_STRIPPING, |
| NULL, 0); |
| } |
| |
| /** |
| * i40evf_disable_vlan_stripping |
| * @adapter: adapter structure |
| * |
| * Request VLAN header stripping to be disabled |
| **/ |
| void i40evf_disable_vlan_stripping(struct i40evf_adapter *adapter) |
| { |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot disable stripping, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_DISABLE_VLAN_STRIPPING; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_DISABLE_VLAN_STRIPPING; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_DISABLE_VLAN_STRIPPING, |
| NULL, 0); |
| } |
| |
| /** |
| * i40evf_print_link_message - print link up or down |
| * @adapter: adapter structure |
| * |
| * Log a message telling the world of our wonderous link status |
| */ |
| static void i40evf_print_link_message(struct i40evf_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| char *speed = "Unknown "; |
| |
| if (!adapter->link_up) { |
| netdev_info(netdev, "NIC Link is Down\n"); |
| return; |
| } |
| |
| switch (adapter->link_speed) { |
| case I40E_LINK_SPEED_40GB: |
| speed = "40 G"; |
| break; |
| case I40E_LINK_SPEED_25GB: |
| speed = "25 G"; |
| break; |
| case I40E_LINK_SPEED_20GB: |
| speed = "20 G"; |
| break; |
| case I40E_LINK_SPEED_10GB: |
| speed = "10 G"; |
| break; |
| case I40E_LINK_SPEED_1GB: |
| speed = "1000 M"; |
| break; |
| case I40E_LINK_SPEED_100MB: |
| speed = "100 M"; |
| break; |
| default: |
| break; |
| } |
| |
| netdev_info(netdev, "NIC Link is Up %sbps Full Duplex\n", speed); |
| } |
| |
| /** |
| * i40evf_enable_channel |
| * @adapter: adapter structure |
| * |
| * Request that the PF enable channels as specified by |
| * the user via tc tool. |
| **/ |
| void i40evf_enable_channels(struct i40evf_adapter *adapter) |
| { |
| struct virtchnl_tc_info *vti = NULL; |
| u16 len; |
| int i; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot configure mqprio, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| |
| len = (adapter->num_tc * sizeof(struct virtchnl_channel_info)) + |
| sizeof(struct virtchnl_tc_info); |
| |
| vti = kzalloc(len, GFP_KERNEL); |
| if (!vti) |
| return; |
| vti->num_tc = adapter->num_tc; |
| for (i = 0; i < vti->num_tc; i++) { |
| vti->list[i].count = adapter->ch_config.ch_info[i].count; |
| vti->list[i].offset = adapter->ch_config.ch_info[i].offset; |
| vti->list[i].pad = 0; |
| vti->list[i].max_tx_rate = |
| adapter->ch_config.ch_info[i].max_tx_rate; |
| } |
| |
| adapter->ch_config.state = __I40EVF_TC_RUNNING; |
| adapter->flags |= I40EVF_FLAG_REINIT_ITR_NEEDED; |
| adapter->current_op = VIRTCHNL_OP_ENABLE_CHANNELS; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_ENABLE_CHANNELS; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_ENABLE_CHANNELS, |
| (u8 *)vti, len); |
| kfree(vti); |
| } |
| |
| /** |
| * i40evf_disable_channel |
| * @adapter: adapter structure |
| * |
| * Request that the PF disable channels that are configured |
| **/ |
| void i40evf_disable_channels(struct i40evf_adapter *adapter) |
| { |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot configure mqprio, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| |
| adapter->ch_config.state = __I40EVF_TC_INVALID; |
| adapter->flags |= I40EVF_FLAG_REINIT_ITR_NEEDED; |
| adapter->current_op = VIRTCHNL_OP_DISABLE_CHANNELS; |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_DISABLE_CHANNELS; |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_DISABLE_CHANNELS, |
| NULL, 0); |
| } |
| |
| /** |
| * i40evf_print_cloud_filter |
| * @adapter: adapter structure |
| * @f: cloud filter to print |
| * |
| * Print the cloud filter |
| **/ |
| static void i40evf_print_cloud_filter(struct i40evf_adapter *adapter, |
| struct virtchnl_filter *f) |
| { |
| switch (f->flow_type) { |
| case VIRTCHNL_TCP_V4_FLOW: |
| dev_info(&adapter->pdev->dev, "dst_mac: %pM src_mac: %pM vlan_id: %hu dst_ip: %pI4 src_ip %pI4 dst_port %hu src_port %hu\n", |
| &f->data.tcp_spec.dst_mac, |
| &f->data.tcp_spec.src_mac, |
| ntohs(f->data.tcp_spec.vlan_id), |
| &f->data.tcp_spec.dst_ip[0], |
| &f->data.tcp_spec.src_ip[0], |
| ntohs(f->data.tcp_spec.dst_port), |
| ntohs(f->data.tcp_spec.src_port)); |
| break; |
| case VIRTCHNL_TCP_V6_FLOW: |
| dev_info(&adapter->pdev->dev, "dst_mac: %pM src_mac: %pM vlan_id: %hu dst_ip: %pI6 src_ip %pI6 dst_port %hu src_port %hu\n", |
| &f->data.tcp_spec.dst_mac, |
| &f->data.tcp_spec.src_mac, |
| ntohs(f->data.tcp_spec.vlan_id), |
| &f->data.tcp_spec.dst_ip, |
| &f->data.tcp_spec.src_ip, |
| ntohs(f->data.tcp_spec.dst_port), |
| ntohs(f->data.tcp_spec.src_port)); |
| break; |
| } |
| } |
| |
| /** |
| * i40evf_add_cloud_filter |
| * @adapter: adapter structure |
| * |
| * Request that the PF add cloud filters as specified |
| * by the user via tc tool. |
| **/ |
| void i40evf_add_cloud_filter(struct i40evf_adapter *adapter) |
| { |
| struct i40evf_cloud_filter *cf; |
| struct virtchnl_filter *f; |
| int len = 0, count = 0; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot add cloud filter, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| list_for_each_entry(cf, &adapter->cloud_filter_list, list) { |
| if (cf->add) { |
| count++; |
| break; |
| } |
| } |
| if (!count) { |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_ADD_CLOUD_FILTER; |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_ADD_CLOUD_FILTER; |
| |
| len = sizeof(struct virtchnl_filter); |
| f = kzalloc(len, GFP_KERNEL); |
| if (!f) |
| return; |
| |
| list_for_each_entry(cf, &adapter->cloud_filter_list, list) { |
| if (cf->add) { |
| memcpy(f, &cf->f, sizeof(struct virtchnl_filter)); |
| cf->add = false; |
| cf->state = __I40EVF_CF_ADD_PENDING; |
| i40evf_send_pf_msg(adapter, |
| VIRTCHNL_OP_ADD_CLOUD_FILTER, |
| (u8 *)f, len); |
| } |
| } |
| kfree(f); |
| } |
| |
| /** |
| * i40evf_del_cloud_filter |
| * @adapter: adapter structure |
| * |
| * Request that the PF delete cloud filters as specified |
| * by the user via tc tool. |
| **/ |
| void i40evf_del_cloud_filter(struct i40evf_adapter *adapter) |
| { |
| struct i40evf_cloud_filter *cf, *cftmp; |
| struct virtchnl_filter *f; |
| int len = 0, count = 0; |
| |
| if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { |
| /* bail because we already have a command pending */ |
| dev_err(&adapter->pdev->dev, "Cannot remove cloud filter, command %d pending\n", |
| adapter->current_op); |
| return; |
| } |
| list_for_each_entry(cf, &adapter->cloud_filter_list, list) { |
| if (cf->del) { |
| count++; |
| break; |
| } |
| } |
| if (!count) { |
| adapter->aq_required &= ~I40EVF_FLAG_AQ_DEL_CLOUD_FILTER; |
| return; |
| } |
| adapter->current_op = VIRTCHNL_OP_DEL_CLOUD_FILTER; |
| |
| len = sizeof(struct virtchnl_filter); |
| f = kzalloc(len, GFP_KERNEL); |
| if (!f) |
| return; |
| |
| list_for_each_entry_safe(cf, cftmp, &adapter->cloud_filter_list, list) { |
| if (cf->del) { |
| memcpy(f, &cf->f, sizeof(struct virtchnl_filter)); |
| cf->del = false; |
| cf->state = __I40EVF_CF_DEL_PENDING; |
| i40evf_send_pf_msg(adapter, |
| VIRTCHNL_OP_DEL_CLOUD_FILTER, |
| (u8 *)f, len); |
| } |
| } |
| kfree(f); |
| } |
| |
| /** |
| * i40evf_request_reset |
| * @adapter: adapter structure |
| * |
| * Request that the PF reset this VF. No response is expected. |
| **/ |
| void i40evf_request_reset(struct i40evf_adapter *adapter) |
| { |
| /* Don't check CURRENT_OP - this is always higher priority */ |
| i40evf_send_pf_msg(adapter, VIRTCHNL_OP_RESET_VF, NULL, 0); |
| adapter->current_op = VIRTCHNL_OP_UNKNOWN; |
| } |
| |
| /** |
| * i40evf_virtchnl_completion |
| * @adapter: adapter structure |
| * @v_opcode: opcode sent by PF |
| * @v_retval: retval sent by PF |
| * @msg: message sent by PF |
| * @msglen: message length |
| * |
| * Asynchronous completion function for admin queue messages. Rather than busy |
| * wait, we fire off our requests and assume that no errors will be returned. |
| * This function handles the reply messages. |
| **/ |
| void i40evf_virtchnl_completion(struct i40evf_adapter *adapter, |
| enum virtchnl_ops v_opcode, |
| i40e_status v_retval, |
| u8 *msg, u16 msglen) |
| { |
| struct net_device *netdev = adapter->netdev; |
| |
| if (v_opcode == VIRTCHNL_OP_EVENT) { |
| struct virtchnl_pf_event *vpe = |
| (struct virtchnl_pf_event *)msg; |
| bool link_up = vpe->event_data.link_event.link_status; |
| switch (vpe->event) { |
| case VIRTCHNL_EVENT_LINK_CHANGE: |
| adapter->link_speed = |
| vpe->event_data.link_event.link_speed; |
| |
| /* we've already got the right link status, bail */ |
| if (adapter->link_up == link_up) |
| break; |
| |
| if (link_up) { |
| /* If we get link up message and start queues |
| * before our queues are configured it will |
| * trigger a TX hang. In that case, just ignore |
| * the link status message,we'll get another one |
| * after we enable queues and actually prepared |
| * to send traffic. |
| */ |
| if (adapter->state != __I40EVF_RUNNING) |
| break; |
| |
| /* For ADq enabled VF, we reconfigure VSIs and |
| * re-allocate queues. Hence wait till all |
| * queues are enabled. |
| */ |
| if (adapter->flags & |
| I40EVF_FLAG_QUEUES_DISABLED) |
| break; |
| } |
| |
| adapter->link_up = link_up; |
| if (link_up) { |
| netif_tx_start_all_queues(netdev); |
| netif_carrier_on(netdev); |
| } else { |
| netif_tx_stop_all_queues(netdev); |
| netif_carrier_off(netdev); |
| } |
| i40evf_print_link_message(adapter); |
| break; |
| case VIRTCHNL_EVENT_RESET_IMPENDING: |
| dev_info(&adapter->pdev->dev, "Reset warning received from the PF\n"); |
| if (!(adapter->flags & I40EVF_FLAG_RESET_PENDING)) { |
| adapter->flags |= I40EVF_FLAG_RESET_PENDING; |
| dev_info(&adapter->pdev->dev, "Scheduling reset task\n"); |
| schedule_work(&adapter->reset_task); |
| } |
| break; |
| default: |
| dev_err(&adapter->pdev->dev, "Unknown event %d from PF\n", |
| vpe->event); |
| break; |
| } |
| return; |
| } |
| if (v_retval) { |
| switch (v_opcode) { |
| case VIRTCHNL_OP_ADD_VLAN: |
| dev_err(&adapter->pdev->dev, "Failed to add VLAN filter, error %s\n", |
| i40evf_stat_str(&adapter->hw, v_retval)); |
| break; |
| case VIRTCHNL_OP_ADD_ETH_ADDR: |
| dev_err(&adapter->pdev->dev, "Failed to add MAC filter, error %s\n", |
| i40evf_stat_str(&adapter->hw, v_retval)); |
| break; |
| case VIRTCHNL_OP_DEL_VLAN: |
| dev_err(&adapter->pdev->dev, "Failed to delete VLAN filter, error %s\n", |
| i40evf_stat_str(&adapter->hw, v_retval)); |
| break; |
| case VIRTCHNL_OP_DEL_ETH_ADDR: |
| dev_err(&adapter->pdev->dev, "Failed to delete MAC filter, error %s\n", |
| i40evf_stat_str(&adapter->hw, v_retval)); |
| break; |
| case VIRTCHNL_OP_ENABLE_CHANNELS: |
| dev_err(&adapter->pdev->dev, "Failed to configure queue channels, error %s\n", |
| i40evf_stat_str(&adapter->hw, v_retval)); |
| adapter->flags &= ~I40EVF_FLAG_REINIT_ITR_NEEDED; |
| adapter->ch_config.state = __I40EVF_TC_INVALID; |
| netdev_reset_tc(netdev); |
| netif_tx_start_all_queues(netdev); |
| break; |
| case VIRTCHNL_OP_DISABLE_CHANNELS: |
| dev_err(&adapter->pdev->dev, "Failed to disable queue channels, error %s\n", |
| i40evf_stat_str(&adapter->hw, v_retval)); |
| adapter->flags &= ~I40EVF_FLAG_REINIT_ITR_NEEDED; |
| adapter->ch_config.state = __I40EVF_TC_RUNNING; |
| netif_tx_start_all_queues(netdev); |
| break; |
| case VIRTCHNL_OP_ADD_CLOUD_FILTER: { |
| struct i40evf_cloud_filter *cf, *cftmp; |
| |
| list_for_each_entry_safe(cf, cftmp, |
| &adapter->cloud_filter_list, |
| list) { |
| if (cf->state == __I40EVF_CF_ADD_PENDING) { |
| cf->state = __I40EVF_CF_INVALID; |
| dev_info(&adapter->pdev->dev, "Failed to add cloud filter, error %s\n", |
| i40evf_stat_str(&adapter->hw, |
| v_retval)); |
| i40evf_print_cloud_filter(adapter, |
| &cf->f); |
| list_del(&cf->list); |
| kfree(cf); |
| adapter->num_cloud_filters--; |
| } |
| } |
| } |
| break; |
| case VIRTCHNL_OP_DEL_CLOUD_FILTER: { |
| struct i40evf_cloud_filter *cf; |
| |
| list_for_each_entry(cf, &adapter->cloud_filter_list, |
| list) { |
| if (cf->state == __I40EVF_CF_DEL_PENDING) { |
| cf->state = __I40EVF_CF_ACTIVE; |
| dev_info(&adapter->pdev->dev, "Failed to del cloud filter, error %s\n", |
| i40evf_stat_str(&adapter->hw, |
| v_retval)); |
| i40evf_print_cloud_filter(adapter, |
| &cf->f); |
| } |
| } |
| } |
| break; |
| default: |
| dev_err(&adapter->pdev->dev, "PF returned error %d (%s) to our request %d\n", |
| v_retval, |
| i40evf_stat_str(&adapter->hw, v_retval), |
| v_opcode); |
| } |
| } |
| switch (v_opcode) { |
| case VIRTCHNL_OP_GET_STATS: { |
| struct i40e_eth_stats *stats = |
| (struct i40e_eth_stats *)msg; |
| netdev->stats.rx_packets = stats->rx_unicast + |
| stats->rx_multicast + |
| stats->rx_broadcast; |
| netdev->stats.tx_packets = stats->tx_unicast + |
| stats->tx_multicast + |
| stats->tx_broadcast; |
| netdev->stats.rx_bytes = stats->rx_bytes; |
| netdev->stats.tx_bytes = stats->tx_bytes; |
| netdev->stats.tx_errors = stats->tx_errors; |
| netdev->stats.rx_dropped = stats->rx_discards; |
| netdev->stats.tx_dropped = stats->tx_discards; |
| adapter->current_stats = *stats; |
| } |
| break; |
| case VIRTCHNL_OP_GET_VF_RESOURCES: { |
| u16 len = sizeof(struct virtchnl_vf_resource) + |
| I40E_MAX_VF_VSI * |
| sizeof(struct virtchnl_vsi_resource); |
| memcpy(adapter->vf_res, msg, min(msglen, len)); |
| i40evf_validate_num_queues(adapter); |
| i40e_vf_parse_hw_config(&adapter->hw, adapter->vf_res); |
| if (is_zero_ether_addr(adapter->hw.mac.addr)) { |
| /* restore current mac address */ |
| ether_addr_copy(adapter->hw.mac.addr, netdev->dev_addr); |
| } else { |
| /* refresh current mac address if changed */ |
| ether_addr_copy(netdev->dev_addr, adapter->hw.mac.addr); |
| ether_addr_copy(netdev->perm_addr, |
| adapter->hw.mac.addr); |
| } |
| i40evf_process_config(adapter); |
| } |
| break; |
| case VIRTCHNL_OP_ENABLE_QUEUES: |
| /* enable transmits */ |
| i40evf_irq_enable(adapter, true); |
| adapter->flags &= ~I40EVF_FLAG_QUEUES_DISABLED; |
| break; |
| case VIRTCHNL_OP_DISABLE_QUEUES: |
| i40evf_free_all_tx_resources(adapter); |
| i40evf_free_all_rx_resources(adapter); |
| if (adapter->state == __I40EVF_DOWN_PENDING) { |
| adapter->state = __I40EVF_DOWN; |
| wake_up(&adapter->down_waitqueue); |
| } |
| break; |
| case VIRTCHNL_OP_VERSION: |
| case VIRTCHNL_OP_CONFIG_IRQ_MAP: |
| /* Don't display an error if we get these out of sequence. |
| * If the firmware needed to get kicked, we'll get these and |
| * it's no problem. |
| */ |
| if (v_opcode != adapter->current_op) |
| return; |
| break; |
| case VIRTCHNL_OP_IWARP: |
| /* Gobble zero-length replies from the PF. They indicate that |
| * a previous message was received OK, and the client doesn't |
| * care about that. |
| */ |
| if (msglen && CLIENT_ENABLED(adapter)) |
| i40evf_notify_client_message(&adapter->vsi, |
| msg, msglen); |
| break; |
| |
| case VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP: |
| adapter->client_pending &= |
| ~(BIT(VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP)); |
| break; |
| case VIRTCHNL_OP_GET_RSS_HENA_CAPS: { |
| struct virtchnl_rss_hena *vrh = (struct virtchnl_rss_hena *)msg; |
| if (msglen == sizeof(*vrh)) |
| adapter->hena = vrh->hena; |
| else |
| dev_warn(&adapter->pdev->dev, |
| "Invalid message %d from PF\n", v_opcode); |
| } |
| break; |
| case VIRTCHNL_OP_REQUEST_QUEUES: { |
| struct virtchnl_vf_res_request *vfres = |
| (struct virtchnl_vf_res_request *)msg; |
| if (vfres->num_queue_pairs != adapter->num_req_queues) { |
| dev_info(&adapter->pdev->dev, |
| "Requested %d queues, PF can support %d\n", |
| adapter->num_req_queues, |
| vfres->num_queue_pairs); |
| adapter->num_req_queues = 0; |
| adapter->flags &= ~I40EVF_FLAG_REINIT_ITR_NEEDED; |
| } |
| } |
| break; |
| case VIRTCHNL_OP_ADD_CLOUD_FILTER: { |
| struct i40evf_cloud_filter *cf; |
| |
| list_for_each_entry(cf, &adapter->cloud_filter_list, list) { |
| if (cf->state == __I40EVF_CF_ADD_PENDING) |
| cf->state = __I40EVF_CF_ACTIVE; |
| } |
| } |
| break; |
| case VIRTCHNL_OP_DEL_CLOUD_FILTER: { |
| struct i40evf_cloud_filter *cf, *cftmp; |
| |
| list_for_each_entry_safe(cf, cftmp, &adapter->cloud_filter_list, |
| list) { |
| if (cf->state == __I40EVF_CF_DEL_PENDING) { |
| cf->state = __I40EVF_CF_INVALID; |
| list_del(&cf->list); |
| kfree(cf); |
| adapter->num_cloud_filters--; |
| } |
| } |
| } |
| break; |
| default: |
| if (adapter->current_op && (v_opcode != adapter->current_op)) |
| dev_warn(&adapter->pdev->dev, "Expected response %d from PF, received %d\n", |
| adapter->current_op, v_opcode); |
| break; |
| } /* switch v_opcode */ |
| adapter->current_op = VIRTCHNL_OP_UNKNOWN; |
| } |