| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2000-2002,2005 Silicon Graphics, Inc. |
| * All Rights Reserved. |
| */ |
| #include "xfs.h" |
| #include "xfs_fs.h" |
| #include "xfs_shared.h" |
| #include "xfs_format.h" |
| #include "xfs_log_format.h" |
| #include "xfs_trans_resv.h" |
| #include "xfs_mount.h" |
| #include "xfs_inode.h" |
| #include "xfs_btree.h" |
| #include "xfs_ialloc.h" |
| #include "xfs_ialloc_btree.h" |
| #include "xfs_iwalk.h" |
| #include "xfs_itable.h" |
| #include "xfs_error.h" |
| #include "xfs_icache.h" |
| #include "xfs_health.h" |
| |
| /* |
| * Bulk Stat |
| * ========= |
| * |
| * Use the inode walking functions to fill out struct xfs_bulkstat for every |
| * allocated inode, then pass the stat information to some externally provided |
| * iteration function. |
| */ |
| |
| struct xfs_bstat_chunk { |
| bulkstat_one_fmt_pf formatter; |
| struct xfs_ibulk *breq; |
| struct xfs_bulkstat *buf; |
| }; |
| |
| /* |
| * Fill out the bulkstat info for a single inode and report it somewhere. |
| * |
| * bc->breq->lastino is effectively the inode cursor as we walk through the |
| * filesystem. Therefore, we update it any time we need to move the cursor |
| * forward, regardless of whether or not we're sending any bstat information |
| * back to userspace. If the inode is internal metadata or, has been freed |
| * out from under us, we just simply keep going. |
| * |
| * However, if any other type of error happens we want to stop right where we |
| * are so that userspace will call back with exact number of the bad inode and |
| * we can send back an error code. |
| * |
| * Note that if the formatter tells us there's no space left in the buffer we |
| * move the cursor forward and abort the walk. |
| */ |
| STATIC int |
| xfs_bulkstat_one_int( |
| struct xfs_mount *mp, |
| struct xfs_trans *tp, |
| xfs_ino_t ino, |
| struct xfs_bstat_chunk *bc) |
| { |
| struct xfs_icdinode *dic; /* dinode core info pointer */ |
| struct xfs_inode *ip; /* incore inode pointer */ |
| struct inode *inode; |
| struct xfs_bulkstat *buf = bc->buf; |
| int error = -EINVAL; |
| |
| if (xfs_internal_inum(mp, ino)) |
| goto out_advance; |
| |
| error = xfs_iget(mp, tp, ino, |
| (XFS_IGET_DONTCACHE | XFS_IGET_UNTRUSTED), |
| XFS_ILOCK_SHARED, &ip); |
| if (error == -ENOENT || error == -EINVAL) |
| goto out_advance; |
| if (error) |
| goto out; |
| |
| ASSERT(ip != NULL); |
| ASSERT(ip->i_imap.im_blkno != 0); |
| inode = VFS_I(ip); |
| |
| dic = &ip->i_d; |
| |
| /* xfs_iget returns the following without needing |
| * further change. |
| */ |
| buf->bs_projectid = xfs_get_projid(ip); |
| buf->bs_ino = ino; |
| buf->bs_uid = dic->di_uid; |
| buf->bs_gid = dic->di_gid; |
| buf->bs_size = dic->di_size; |
| |
| buf->bs_nlink = inode->i_nlink; |
| buf->bs_atime = inode->i_atime.tv_sec; |
| buf->bs_atime_nsec = inode->i_atime.tv_nsec; |
| buf->bs_mtime = inode->i_mtime.tv_sec; |
| buf->bs_mtime_nsec = inode->i_mtime.tv_nsec; |
| buf->bs_ctime = inode->i_ctime.tv_sec; |
| buf->bs_ctime_nsec = inode->i_ctime.tv_nsec; |
| buf->bs_btime = dic->di_crtime.t_sec; |
| buf->bs_btime_nsec = dic->di_crtime.t_nsec; |
| buf->bs_gen = inode->i_generation; |
| buf->bs_mode = inode->i_mode; |
| |
| buf->bs_xflags = xfs_ip2xflags(ip); |
| buf->bs_extsize_blks = dic->di_extsize; |
| buf->bs_extents = dic->di_nextents; |
| xfs_bulkstat_health(ip, buf); |
| buf->bs_aextents = dic->di_anextents; |
| buf->bs_forkoff = XFS_IFORK_BOFF(ip); |
| buf->bs_version = XFS_BULKSTAT_VERSION_V5; |
| |
| if (dic->di_version == 3) { |
| if (dic->di_flags2 & XFS_DIFLAG2_COWEXTSIZE) |
| buf->bs_cowextsize_blks = dic->di_cowextsize; |
| } |
| |
| switch (dic->di_format) { |
| case XFS_DINODE_FMT_DEV: |
| buf->bs_rdev = sysv_encode_dev(inode->i_rdev); |
| buf->bs_blksize = BLKDEV_IOSIZE; |
| buf->bs_blocks = 0; |
| break; |
| case XFS_DINODE_FMT_LOCAL: |
| buf->bs_rdev = 0; |
| buf->bs_blksize = mp->m_sb.sb_blocksize; |
| buf->bs_blocks = 0; |
| break; |
| case XFS_DINODE_FMT_EXTENTS: |
| case XFS_DINODE_FMT_BTREE: |
| buf->bs_rdev = 0; |
| buf->bs_blksize = mp->m_sb.sb_blocksize; |
| buf->bs_blocks = dic->di_nblocks + ip->i_delayed_blks; |
| break; |
| } |
| xfs_iunlock(ip, XFS_ILOCK_SHARED); |
| xfs_irele(ip); |
| |
| error = bc->formatter(bc->breq, buf); |
| if (error == XFS_IBULK_ABORT) |
| goto out_advance; |
| if (error) |
| goto out; |
| |
| out_advance: |
| /* |
| * Advance the cursor to the inode that comes after the one we just |
| * looked at. We want the caller to move along if the bulkstat |
| * information was copied successfully; if we tried to grab the inode |
| * but it's no longer allocated; or if it's internal metadata. |
| */ |
| bc->breq->startino = ino + 1; |
| out: |
| return error; |
| } |
| |
| /* Bulkstat a single inode. */ |
| int |
| xfs_bulkstat_one( |
| struct xfs_ibulk *breq, |
| bulkstat_one_fmt_pf formatter) |
| { |
| struct xfs_bstat_chunk bc = { |
| .formatter = formatter, |
| .breq = breq, |
| }; |
| int error; |
| |
| ASSERT(breq->icount == 1); |
| |
| bc.buf = kmem_zalloc(sizeof(struct xfs_bulkstat), |
| KM_SLEEP | KM_MAYFAIL); |
| if (!bc.buf) |
| return -ENOMEM; |
| |
| error = xfs_bulkstat_one_int(breq->mp, NULL, breq->startino, &bc); |
| |
| kmem_free(bc.buf); |
| |
| /* |
| * If we reported one inode to userspace then we abort because we hit |
| * the end of the buffer. Don't leak that back to userspace. |
| */ |
| if (error == XFS_IWALK_ABORT) |
| error = 0; |
| |
| return error; |
| } |
| |
| static int |
| xfs_bulkstat_iwalk( |
| struct xfs_mount *mp, |
| struct xfs_trans *tp, |
| xfs_ino_t ino, |
| void *data) |
| { |
| int error; |
| |
| error = xfs_bulkstat_one_int(mp, tp, ino, data); |
| /* bulkstat just skips over missing inodes */ |
| if (error == -ENOENT || error == -EINVAL) |
| return 0; |
| return error; |
| } |
| |
| /* |
| * Check the incoming lastino parameter. |
| * |
| * We allow any inode value that could map to physical space inside the |
| * filesystem because if there are no inodes there, bulkstat moves on to the |
| * next chunk. In other words, the magic agino value of zero takes us to the |
| * first chunk in the AG, and an agino value past the end of the AG takes us to |
| * the first chunk in the next AG. |
| * |
| * Therefore we can end early if the requested inode is beyond the end of the |
| * filesystem or doesn't map properly. |
| */ |
| static inline bool |
| xfs_bulkstat_already_done( |
| struct xfs_mount *mp, |
| xfs_ino_t startino) |
| { |
| xfs_agnumber_t agno = XFS_INO_TO_AGNO(mp, startino); |
| xfs_agino_t agino = XFS_INO_TO_AGINO(mp, startino); |
| |
| return agno >= mp->m_sb.sb_agcount || |
| startino != XFS_AGINO_TO_INO(mp, agno, agino); |
| } |
| |
| /* Return stat information in bulk (by-inode) for the filesystem. */ |
| int |
| xfs_bulkstat( |
| struct xfs_ibulk *breq, |
| bulkstat_one_fmt_pf formatter) |
| { |
| struct xfs_bstat_chunk bc = { |
| .formatter = formatter, |
| .breq = breq, |
| }; |
| int error; |
| |
| if (xfs_bulkstat_already_done(breq->mp, breq->startino)) |
| return 0; |
| |
| bc.buf = kmem_zalloc(sizeof(struct xfs_bulkstat), |
| KM_SLEEP | KM_MAYFAIL); |
| if (!bc.buf) |
| return -ENOMEM; |
| |
| error = xfs_iwalk(breq->mp, NULL, breq->startino, breq->flags, |
| xfs_bulkstat_iwalk, breq->icount, &bc); |
| |
| kmem_free(bc.buf); |
| |
| /* |
| * We found some inodes, so clear the error status and return them. |
| * The lastino pointer will point directly at the inode that triggered |
| * any error that occurred, so on the next call the error will be |
| * triggered again and propagated to userspace as there will be no |
| * formatted inodes in the buffer. |
| */ |
| if (breq->ocount > 0) |
| error = 0; |
| |
| return error; |
| } |
| |
| /* Convert bulkstat (v5) to bstat (v1). */ |
| void |
| xfs_bulkstat_to_bstat( |
| struct xfs_mount *mp, |
| struct xfs_bstat *bs1, |
| const struct xfs_bulkstat *bstat) |
| { |
| memset(bs1, 0, sizeof(struct xfs_bstat)); |
| bs1->bs_ino = bstat->bs_ino; |
| bs1->bs_mode = bstat->bs_mode; |
| bs1->bs_nlink = bstat->bs_nlink; |
| bs1->bs_uid = bstat->bs_uid; |
| bs1->bs_gid = bstat->bs_gid; |
| bs1->bs_rdev = bstat->bs_rdev; |
| bs1->bs_blksize = bstat->bs_blksize; |
| bs1->bs_size = bstat->bs_size; |
| bs1->bs_atime.tv_sec = bstat->bs_atime; |
| bs1->bs_mtime.tv_sec = bstat->bs_mtime; |
| bs1->bs_ctime.tv_sec = bstat->bs_ctime; |
| bs1->bs_atime.tv_nsec = bstat->bs_atime_nsec; |
| bs1->bs_mtime.tv_nsec = bstat->bs_mtime_nsec; |
| bs1->bs_ctime.tv_nsec = bstat->bs_ctime_nsec; |
| bs1->bs_blocks = bstat->bs_blocks; |
| bs1->bs_xflags = bstat->bs_xflags; |
| bs1->bs_extsize = XFS_FSB_TO_B(mp, bstat->bs_extsize_blks); |
| bs1->bs_extents = bstat->bs_extents; |
| bs1->bs_gen = bstat->bs_gen; |
| bs1->bs_projid_lo = bstat->bs_projectid & 0xFFFF; |
| bs1->bs_forkoff = bstat->bs_forkoff; |
| bs1->bs_projid_hi = bstat->bs_projectid >> 16; |
| bs1->bs_sick = bstat->bs_sick; |
| bs1->bs_checked = bstat->bs_checked; |
| bs1->bs_cowextsize = XFS_FSB_TO_B(mp, bstat->bs_cowextsize_blks); |
| bs1->bs_dmevmask = 0; |
| bs1->bs_dmstate = 0; |
| bs1->bs_aextents = bstat->bs_aextents; |
| } |
| |
| struct xfs_inumbers_chunk { |
| inumbers_fmt_pf formatter; |
| struct xfs_ibulk *breq; |
| }; |
| |
| /* |
| * INUMBERS |
| * ======== |
| * This is how we export inode btree records to userspace, so that XFS tools |
| * can figure out where inodes are allocated. |
| */ |
| |
| /* |
| * Format the inode group structure and report it somewhere. |
| * |
| * Similar to xfs_bulkstat_one_int, lastino is the inode cursor as we walk |
| * through the filesystem so we move it forward unless there was a runtime |
| * error. If the formatter tells us the buffer is now full we also move the |
| * cursor forward and abort the walk. |
| */ |
| STATIC int |
| xfs_inumbers_walk( |
| struct xfs_mount *mp, |
| struct xfs_trans *tp, |
| xfs_agnumber_t agno, |
| const struct xfs_inobt_rec_incore *irec, |
| void *data) |
| { |
| struct xfs_inumbers inogrp = { |
| .xi_startino = XFS_AGINO_TO_INO(mp, agno, irec->ir_startino), |
| .xi_alloccount = irec->ir_count - irec->ir_freecount, |
| .xi_allocmask = ~irec->ir_free, |
| .xi_version = XFS_INUMBERS_VERSION_V5, |
| }; |
| struct xfs_inumbers_chunk *ic = data; |
| int error; |
| |
| error = ic->formatter(ic->breq, &inogrp); |
| if (error && error != XFS_IBULK_ABORT) |
| return error; |
| |
| ic->breq->startino = XFS_AGINO_TO_INO(mp, agno, irec->ir_startino) + |
| XFS_INODES_PER_CHUNK; |
| return error; |
| } |
| |
| /* |
| * Return inode number table for the filesystem. |
| */ |
| int |
| xfs_inumbers( |
| struct xfs_ibulk *breq, |
| inumbers_fmt_pf formatter) |
| { |
| struct xfs_inumbers_chunk ic = { |
| .formatter = formatter, |
| .breq = breq, |
| }; |
| int error = 0; |
| |
| if (xfs_bulkstat_already_done(breq->mp, breq->startino)) |
| return 0; |
| |
| error = xfs_inobt_walk(breq->mp, NULL, breq->startino, breq->flags, |
| xfs_inumbers_walk, breq->icount, &ic); |
| |
| /* |
| * We found some inode groups, so clear the error status and return |
| * them. The lastino pointer will point directly at the inode that |
| * triggered any error that occurred, so on the next call the error |
| * will be triggered again and propagated to userspace as there will be |
| * no formatted inode groups in the buffer. |
| */ |
| if (breq->ocount > 0) |
| error = 0; |
| |
| return error; |
| } |
| |
| /* Convert an inumbers (v5) struct to a inogrp (v1) struct. */ |
| void |
| xfs_inumbers_to_inogrp( |
| struct xfs_inogrp *ig1, |
| const struct xfs_inumbers *ig) |
| { |
| ig1->xi_startino = ig->xi_startino; |
| ig1->xi_alloccount = ig->xi_alloccount; |
| ig1->xi_allocmask = ig->xi_allocmask; |
| } |