| menu "Kernel hacking" |
| |
| source "lib/Kconfig.debug" |
| |
| config STRICT_DEVMEM |
| bool "Filter access to /dev/mem" |
| depends on MMU |
| ---help--- |
| If this option is disabled, you allow userspace (root) access to all |
| of memory, including kernel and userspace memory. Accidental |
| access to this is obviously disastrous, but specific access can |
| be used by people debugging the kernel. |
| |
| If this option is switched on, the /dev/mem file only allows |
| userspace access to memory mapped peripherals. |
| |
| If in doubt, say Y. |
| |
| # RMK wants arm kernels compiled with frame pointers or stack unwinding. |
| # If you know what you are doing and are willing to live without stack |
| # traces, you can get a slightly smaller kernel by setting this option to |
| # n, but then RMK will have to kill you ;). |
| config FRAME_POINTER |
| bool |
| depends on !THUMB2_KERNEL |
| default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER |
| help |
| If you say N here, the resulting kernel will be slightly smaller and |
| faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled, |
| when a problem occurs with the kernel, the information that is |
| reported is severely limited. |
| |
| config ARM_UNWIND |
| bool "Enable stack unwinding support (EXPERIMENTAL)" |
| depends on AEABI && EXPERIMENTAL |
| default y |
| help |
| This option enables stack unwinding support in the kernel |
| using the information automatically generated by the |
| compiler. The resulting kernel image is slightly bigger but |
| the performance is not affected. Currently, this feature |
| only works with EABI compilers. If unsure say Y. |
| |
| config OLD_MCOUNT |
| bool |
| depends on FUNCTION_TRACER && FRAME_POINTER |
| default y |
| |
| config DEBUG_USER |
| bool "Verbose user fault messages" |
| help |
| When a user program crashes due to an exception, the kernel can |
| print a brief message explaining what the problem was. This is |
| sometimes helpful for debugging but serves no purpose on a |
| production system. Most people should say N here. |
| |
| In addition, you need to pass user_debug=N on the kernel command |
| line to enable this feature. N consists of the sum of: |
| |
| 1 - undefined instruction events |
| 2 - system calls |
| 4 - invalid data aborts |
| 8 - SIGSEGV faults |
| 16 - SIGBUS faults |
| |
| # These options are only for real kernel hackers who want to get their hands dirty. |
| config DEBUG_LL |
| bool "Kernel low-level debugging functions (read help!)" |
| depends on DEBUG_KERNEL |
| help |
| Say Y here to include definitions of printascii, printch, printhex |
| in the kernel. This is helpful if you are debugging code that |
| executes before the console is initialized. |
| |
| Note that selecting this option will limit the kernel to a single |
| UART definition, as specified below. Attempting to boot the kernel |
| image on a different platform *will not work*, so this option should |
| not be enabled for kernels that are intended to be portable. |
| |
| choice |
| prompt "Kernel low-level debugging port" |
| depends on DEBUG_LL |
| |
| config AT91_DEBUG_LL_DBGU0 |
| bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl" |
| depends on HAVE_AT91_DBGU0 |
| |
| config AT91_DEBUG_LL_DBGU1 |
| bool "Kernel low-level debugging on 9263 and 9g45" |
| depends on HAVE_AT91_DBGU1 |
| |
| config DEBUG_CLPS711X_UART1 |
| bool "Kernel low-level debugging messages via UART1" |
| depends on ARCH_CLPS711X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the first serial port on these devices. |
| |
| config DEBUG_CLPS711X_UART2 |
| bool "Kernel low-level debugging messages via UART2" |
| depends on ARCH_CLPS711X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the second serial port on these devices. |
| |
| config DEBUG_DAVINCI_DA8XX_UART1 |
| bool "Kernel low-level debugging on DaVinci DA8XX using UART1" |
| depends on ARCH_DAVINCI_DA8XX |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART1 serial port on DaVinci DA8XX devices. |
| |
| config DEBUG_DAVINCI_DA8XX_UART2 |
| bool "Kernel low-level debugging on DaVinci DA8XX using UART2" |
| depends on ARCH_DAVINCI_DA8XX |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART2 serial port on DaVinci DA8XX devices. |
| |
| config DEBUG_DAVINCI_DMx_UART0 |
| bool "Kernel low-level debugging on DaVinci DMx using UART0" |
| depends on ARCH_DAVINCI_DMx |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART0 serial port on DaVinci DMx devices. |
| |
| config DEBUG_DAVINCI_TNETV107X_UART1 |
| bool "Kernel low-level debugging on DaVinci TNETV107x using UART1" |
| depends on ARCH_DAVINCI_TNETV107X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART1 serial port on DaVinci TNETV107X |
| devices. |
| |
| config DEBUG_DC21285_PORT |
| bool "Kernel low-level debugging messages via footbridge serial port" |
| depends on FOOTBRIDGE |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port in the DC21285 (Footbridge). |
| |
| config DEBUG_FOOTBRIDGE_COM1 |
| bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" |
| depends on FOOTBRIDGE |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the 8250 at PCI COM1. |
| |
| config DEBUG_HIGHBANK_UART |
| bool "Kernel low-level debugging messages via Highbank UART" |
| depends on ARCH_HIGHBANK |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the UART on Highbank based devices. |
| |
| config DEBUG_IMX1_UART |
| bool "i.MX1 Debug UART" |
| depends on SOC_IMX1 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX1. |
| |
| config DEBUG_IMX23_UART |
| bool "i.MX23 Debug UART" |
| depends on SOC_IMX23 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX23. |
| |
| config DEBUG_IMX25_UART |
| bool "i.MX25 Debug UART" |
| depends on SOC_IMX25 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX25. |
| |
| config DEBUG_IMX21_IMX27_UART |
| bool "i.MX21 and i.MX27 Debug UART" |
| depends on SOC_IMX21 || SOC_IMX27 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX21 or i.MX27. |
| |
| config DEBUG_IMX28_UART |
| bool "i.MX28 Debug UART" |
| depends on SOC_IMX28 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX28. |
| |
| config DEBUG_IMX31_IMX35_UART |
| bool "i.MX31 and i.MX35 Debug UART" |
| depends on SOC_IMX31 || SOC_IMX35 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX31 or i.MX35. |
| |
| config DEBUG_IMX51_UART |
| bool "i.MX51 Debug UART" |
| depends on SOC_IMX51 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX51. |
| |
| config DEBUG_IMX50_IMX53_UART |
| bool "i.MX50 and i.MX53 Debug UART" |
| depends on SOC_IMX50 || SOC_IMX53 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX50 or i.MX53. |
| |
| config DEBUG_IMX6Q_UART2 |
| bool "i.MX6Q Debug UART2" |
| depends on SOC_IMX6Q |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX6Q UART2. This is correct for e.g. the SabreLite |
| board. |
| |
| config DEBUG_IMX6Q_UART4 |
| bool "i.MX6Q Debug UART4" |
| depends on SOC_IMX6Q |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX6Q UART4. |
| |
| config DEBUG_MSM_UART1 |
| bool "Kernel low-level debugging messages via MSM UART1" |
| depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the first serial port on MSM devices. |
| |
| config DEBUG_MSM_UART2 |
| bool "Kernel low-level debugging messages via MSM UART2" |
| depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the second serial port on MSM devices. |
| |
| config DEBUG_MSM_UART3 |
| bool "Kernel low-level debugging messages via MSM UART3" |
| depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the third serial port on MSM devices. |
| |
| config DEBUG_MSM8660_UART |
| bool "Kernel low-level debugging messages via MSM 8660 UART" |
| depends on ARCH_MSM8X60 |
| select MSM_HAS_DEBUG_UART_HS |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on MSM 8660 devices. |
| |
| config DEBUG_MSM8960_UART |
| bool "Kernel low-level debugging messages via MSM 8960 UART" |
| depends on ARCH_MSM8960 |
| select MSM_HAS_DEBUG_UART_HS |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on MSM 8960 devices. |
| |
| config DEBUG_REALVIEW_STD_PORT |
| bool "RealView Default UART" |
| depends on ARCH_REALVIEW |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on RealView EB, PB11MP, PBA8 |
| and PBX platforms. |
| |
| config DEBUG_REALVIEW_PB1176_PORT |
| bool "RealView PB1176 UART" |
| depends on MACH_REALVIEW_PB1176 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the standard serial port on the RealView |
| PB1176 platform. |
| |
| config DEBUG_S3C_UART0 |
| depends on PLAT_SAMSUNG |
| bool "Use S3C UART 0 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 0. The port must have been initialised |
| by the boot-loader before use. |
| |
| The uncompressor code port configuration is now handled |
| by CONFIG_S3C_LOWLEVEL_UART_PORT. |
| |
| config DEBUG_S3C_UART1 |
| depends on PLAT_SAMSUNG |
| bool "Use S3C UART 1 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 1. The port must have been initialised |
| by the boot-loader before use. |
| |
| The uncompressor code port configuration is now handled |
| by CONFIG_S3C_LOWLEVEL_UART_PORT. |
| |
| config DEBUG_S3C_UART2 |
| depends on PLAT_SAMSUNG |
| bool "Use S3C UART 2 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 2. The port must have been initialised |
| by the boot-loader before use. |
| |
| The uncompressor code port configuration is now handled |
| by CONFIG_S3C_LOWLEVEL_UART_PORT. |
| |
| config DEBUG_VEXPRESS_UART0_DETECT |
| bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" |
| depends on ARCH_VEXPRESS && CPU_CP15_MMU |
| help |
| This option enables a simple heuristic which tries to determine |
| the motherboard's memory map variant (original or RS1) and then |
| choose the relevant UART0 base address. |
| |
| Note that this will only work with standard A-class core tiles, |
| and may fail with non-standard SMM or custom software models. |
| |
| config DEBUG_VEXPRESS_UART0_CA9 |
| bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)" |
| depends on ARCH_VEXPRESS |
| help |
| This option selects UART0 at 0x10009000. Except for custom models, |
| this applies only to the V2P-CA9 tile. |
| |
| config DEBUG_VEXPRESS_UART0_RS1 |
| bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)" |
| depends on ARCH_VEXPRESS |
| help |
| This option selects UART0 at 0x1c090000. This applies to most |
| of the tiles using the RS1 memory map, including all new A-class |
| core tiles, FPGA-based SMMs and software models. |
| |
| config DEBUG_LL_UART_NONE |
| bool "No low-level debugging UART" |
| help |
| Say Y here if your platform doesn't provide a UART option |
| below. This relies on your platform choosing the right UART |
| definition internally in order for low-level debugging to |
| work. |
| |
| config DEBUG_ICEDCC |
| bool "Kernel low-level debugging via EmbeddedICE DCC channel" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the EmbeddedICE macrocell's DCC channel using |
| co-processor 14. This is known to work on the ARM9 style ICE |
| channel and on the XScale with the PEEDI. |
| |
| Note that the system will appear to hang during boot if there |
| is nothing connected to read from the DCC. |
| |
| config DEBUG_SEMIHOSTING |
| bool "Kernel low-level debug output via semihosting I/O" |
| help |
| Semihosting enables code running on an ARM target to use |
| the I/O facilities on a host debugger/emulator through a |
| simple SVC call. The host debugger or emulator must have |
| semihosting enabled for the special svc call to be trapped |
| otherwise the kernel will crash. |
| |
| This is known to work with OpenOCD, as well as |
| ARM's Fast Models, or any other controlling environment |
| that implements semihosting. |
| |
| For more details about semihosting, please see |
| chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. |
| |
| endchoice |
| |
| config EARLY_PRINTK |
| bool "Early printk" |
| depends on DEBUG_LL |
| help |
| Say Y here if you want to have an early console using the |
| kernel low-level debugging functions. Add earlyprintk to your |
| kernel parameters to enable this console. |
| |
| config OC_ETM |
| bool "On-chip ETM and ETB" |
| depends on ARM_AMBA |
| help |
| Enables the on-chip embedded trace macrocell and embedded trace |
| buffer driver that will allow you to collect traces of the |
| kernel code. |
| |
| config ARM_KPROBES_TEST |
| tristate "Kprobes test module" |
| depends on KPROBES && MODULES |
| help |
| Perform tests of kprobes API and instruction set simulation. |
| |
| config PID_IN_CONTEXTIDR |
| bool "Write the current PID to the CONTEXTIDR register" |
| depends on CPU_COPY_V6 |
| help |
| Enabling this option causes the kernel to write the current PID to |
| the PROCID field of the CONTEXTIDR register, at the expense of some |
| additional instructions during context switch. Say Y here only if you |
| are planning to use hardware trace tools with this kernel. |
| |
| endmenu |